Albany G P Style brochure · 2020. 9. 10. · Albany Pumps G: P Style: +44 (0) 1594 842 275 Pump...
Transcript of Albany G P Style brochure · 2020. 9. 10. · Albany Pumps G: P Style: +44 (0) 1594 842 275 Pump...
G: P Style:
Service and Repair Centre
Albany Engineering Company LtdRichter Works, Garnett StreetBradford BD3 9HBUnited Kingdom
t: +44 (0) 1594 842 275 Service and Repair (Option 2).e: [email protected]
Head Offi ce and Manufacturing Centre
Albany Engineering Company LtdChurch Road, LydneyGloucestershire, GL15 5EQ United Kingdomt: +44 (0) 1594 842 275 Head Offi ce Option 1e: [email protected]
G: Gear type pump range
www.albany-pumps.co.uk +44 (0) 1594 842 275
Plastic pumps
General and Chemical Bitumen Fire Dispenser Machines Food Industry Lubrication Marine Oil & Gas Refrigeration Sugar
AL Aluminium | CS Cast Steel | CI Cast Iron | GM Gunmetal | HY Hastelloy | NR Ni-resist | NY Nylon | PP Polypropylene | SD Super Duplex | SS Stainless Steel
Materials: NY | PP
The GP range is made from reinforced plastic casings. Suitable for pumping maximum temperature of 80°C. The P range pumps are used in the feed industry on acidic fats, molasses in the sugar and in paper industries. Offering an economical solution, these highly versatile pumps are also used for transferring molasses and for spraying a variety of fl uids in the farming industry and can be used in chemical industries where polypropylene is often preferred.
Albany PumpsA N E M P L O Y E E O W N E D C O M P A N Y
Albany PumpsA N E M P L O Y E E O W N E D C O M P A N Y
GENERAL & CH
EMICAL
BITUM
ENFIRE
DISPENSER M
ACHIN
ESFO
OD
LUBRICATIO
NM
ARINE
OIL & GAS
REFRIGERATION
SUGAR
Maximum working pressure 7 barg Pump size range 11∕4" - 2" Maximum temperature 80°C Flow rate 50-650 L/min
Albany’s 24-page brochure is available as a download at www.albany-pumps.co.uk
E&OE: Errors and omissions excepted. All content contained herein is subject to change at the Company’s discretion without notice.
Albany Pumps
G: P Style:
www.albany-pumps.co.uk +44 (0) 1594 842 275
Design Options
Model GP20H
Model GP125
Bronze, Carbon bearingsVarious mechanical seal choices Bronze, PTFE & Ertalyte gears
Ertalyte bearings Various mechanical seal materials Choice of lip seal shaft sealing materials
Albany Standard Pumps Richter Works, Garnett Street, Bradford, W. Yorks BD3 9HB
Tel: +44 (0) 1274 725 351 Fax: +44 (0) 1274 742 467 e-mail: [email protected] www. albany-pumps.co.uk
Model DR3
We support Model DR3 with spares and we offer a repair service for installed pumps. Regretfully we cannot supply new pumps.
OTHER CORROSION RESISTANT PUMPS FROM ALBANY INCLUDE GUNMETAL, HASTELLOY, STAINLESS STEEL AND SUPER DUPLEX. SEE OUR GENERAL BROCHURE FOR DETAILS.
Albany Standard Pumps
FF range of Corrosion
Resistant Gear Pumps
Features
Composite construction
NYRIM housing, reinforced with stainless steel
Excellent corrosion resistance
Good abrasion resistance
Lightweight
Simple design
Cost effective
Various options
Applications
Sugar Industry – molasses, blackstrap, syrup, glucose
Paper Industry – soap sulphate, fatty esters, tallow, tall oil
Agriculture – farm effluent, liquid animal feeds and molasses
Mariculture – fish oils, cod liver oil, halibut liver oil, fish proteins, sperm oil, soft wastes
Chemical Industry – oils, polymers, acid
Many others – flavours, fragrances, chocolate, cocoa butter, edible oils
Albany Standard Pumps Richter Works, Garnett Street, Bradford, W. Yorks BD3 9HB
Tel: +44 (0) 1274 725 351 Fax: +44 (0) 1274 742 467 e-mail: [email protected] www. albany-pumps.co.uk
FF09
Design Options
Model GP20H
Model GP125
Bronze, Carbon bearingsVarious mechanical seal choices Bronze, PTFE & Ertalyte gears
Ertalyte bearings Various mechanical seal materials Choice of lip seal shaft sealing materials
Albany Standard Pumps Richter Works, Garnett Street, Bradford, W. Yorks BD3 9HB
Tel: +44 (0) 1274 725 351 Fax: +44 (0) 1274 742 467 e-mail: [email protected] www. albany-pumps.co.uk
Model DR3
We support Model DR3 with spares and we offer a repair service for installed pumps. Regretfully we cannot supply new pumps.
OTHER CORROSION RESISTANT PUMPS FROM ALBANY INCLUDE GUNMETAL, HASTELLOY, STAINLESS STEEL AND SUPER DUPLEX. SEE OUR GENERAL BROCHURE FOR DETAILS.
Albany Standard Pumps
FF range of Corrosion
Resistant Gear Pumps
Features
Composite construction
NYRIM housing, reinforced with stainless steel
Excellent corrosion resistance
Good abrasion resistance
Lightweight
Simple design
Cost effective
Various options
Applications
Sugar Industry – molasses, blackstrap, syrup, glucose
Paper Industry – soap sulphate, fatty esters, tallow, tall oil
Agriculture – farm effluent, liquid animal feeds and molasses
Mariculture – fish oils, cod liver oil, halibut liver oil, fish proteins, sperm oil, soft wastes
Chemical Industry – oils, polymers, acid
Many others – flavours, fragrances, chocolate, cocoa butter, edible oils
Albany Standard Pumps Richter Works, Garnett Street, Bradford, W. Yorks BD3 9HB
Tel: +44 (0) 1274 725 351 Fax: +44 (0) 1274 742 467 e-mail: [email protected] www. albany-pumps.co.uk
FF09
GENERAL & CH
EMICAL
BITUM
ENFIRE
DISPENSER M
ACHIN
ESFO
OD
LUBRICATIO
NM
ARINE
OIL & GAS
REFRIGERATION
SUGAR
Maximum working pressure 7 barg Pump size range 11∕4" - 2" Maximum temperature 80°C Flow rate 50-650 L/min
Albany Pumps
G: P Style:
www.albany-pumps.co.uk +44 (0) 1594 842 275
Pump frame size GP125 GP200 GP20H
Housing Nylon, Nyrim and Polypropylene
Ni-resist, Nylon and Polypropylene
Nylon, Nyrim and Polypropylene
Gears Polyamide 12 Nyrim Polyamide 12
Shafts Stainless steel 316 Stainless steel 316 Stainless steel 316
Bearings Bronze Bronze and outboardball bearing
Bronze
Seals Lip Seal Mechanical seal in Viton Mechanical seal in Viton
Ports 1¼” BSPF 2” BSPF 2½” special order
2” BSPF – UK 2” NPT USA
Top Speed RPM
0 – 950 0 – 300 0 – 650
Temp. range -40 – +80ºC -40 – +100ºC -40 – +80ºC
Performance
Specifications (standard materials of construction)
0
50
100
150
0 200 400 600 800 1000 1200
Cap
acity
-LP
M
Pump Speed - Rpm
GP125 Pump Capacity Vrs SpeedCurve Based on Oil 500 cst
0
1
2
3
4
5
0 500 1000 1500
Pow
er -
Kw
Pump Speed - Rpm
GP125 Pump Power Vrs SpeedCurve Based on Oil 500 cst
0
5
10
15
20
0 100 200 300 400 500 600 700
Pow
er -
Kw
Pump Speed - Rpm
GP20H Pump Power Vrs Speed Curve Based on Oil 500 cst
050
100150200250300350400450500550600650700
0 100 200 300 400 500 600 700
Cap
acity
-LP
M
Pump Speed - Rpm
GP20H Pump Capacity Vrs Speed Curve Based on Oil 500 cst
2 bar
4 bar
7 bar
2 bar
4 bar
7 bar
7 bar
4 bar 2 bar
2 bar
4 bar
7 bar
Model GP20H
Shipping Weight 45 lbs – 21 kgs
Model GP125
Shipping Weight 12lbs – 5.5kgs
Pump frame size GP125 GP200 GP20H
Housing Nylon, Nyrim and Polypropylene
Ni-resist, Nylon and Polypropylene
Nylon, Nyrim and Polypropylene
Gears Polyamide 12 Nyrim Polyamide 12
Shafts Stainless steel 316 Stainless steel 316 Stainless steel 316
Bearings Bronze Bronze and outboardball bearing
Bronze
Seals Lip Seal Mechanical seal in Viton Mechanical seal in Viton
Ports 1¼” BSPF 2” BSPF 2½” special order
2” BSPF – UK 2” NPT USA
Top Speed RPM
0 – 950 0 – 300 0 – 650
Temp. range -40 – +80ºC -40 – +100ºC -40 – +80ºC
Performance
Specifications (standard materials of construction)
0
50
100
150
0 200 400 600 800 1000 1200
Cap
acity
-LP
M
Pump Speed - Rpm
GP125 Pump Capacity Vrs SpeedCurve Based on Oil 500 cst
0
1
2
3
4
5
0 500 1000 1500
Pow
er -
Kw
Pump Speed - Rpm
GP125 Pump Power Vrs SpeedCurve Based on Oil 500 cst
0
5
10
15
20
0 100 200 300 400 500 600 700
Pow
er -
Kw
Pump Speed - Rpm
GP20H Pump Power Vrs Speed Curve Based on Oil 500 cst
050
100150200250300350400450500550600650700
0 100 200 300 400 500 600 700
Cap
acity
-LP
M
Pump Speed - Rpm
GP20H Pump Capacity Vrs Speed Curve Based on Oil 500 cst
2 bar
4 bar
7 bar
2 bar
4 bar
7 bar
7 bar
4 bar 2 bar
2 bar
4 bar
7 bar
Model GP20H
Shipping Weight 45 lbs – 21 kgs
Model GP125
Shipping Weight 12lbs – 5.5kgs
GENERAL & CH
EMICAL
BITUM
ENFIRE
DISPENSER M
ACHIN
ESFO
OD
LUBRICATIO
NM
ARINE
OIL & GAS
REFRIGERATION
SUGAR
Albany Pumps
G: P Style:
www.albany-pumps.co.uk +44 (0) 1594 842 275
Pump frame size GP125 GP200 GP20H
Housing Nylon, Nyrim and Polypropylene
Ni-resist, Nylon and Polypropylene
Nylon, Nyrim and Polypropylene
Gears Polyamide 12 Nyrim Polyamide 12
Shafts Stainless steel 316 Stainless steel 316 Stainless steel 316
Bearings Bronze Bronze and outboardball bearing
Bronze
Seals Lip Seal Mechanical seal in Viton Mechanical seal in Viton
Ports 1¼” BSPF 2” BSPF 2½” special order
2” BSPF – UK 2” NPT USA
Top Speed RPM
0 – 950 0 – 300 0 – 650
Temp. range -40 – +80ºC -40 – +100ºC -40 – +80ºC
Performance
Specifications (standard materials of construction)
0
50
100
150
0 200 400 600 800 1000 1200
Cap
acity
-LP
M
Pump Speed - Rpm
GP125 Pump Capacity Vrs SpeedCurve Based on Oil 500 cst
0
1
2
3
4
5
0 500 1000 1500
Pow
er -
Kw
Pump Speed - Rpm
GP125 Pump Power Vrs SpeedCurve Based on Oil 500 cst
0
5
10
15
20
0 100 200 300 400 500 600 700
Pow
er -
Kw
Pump Speed - Rpm
GP20H Pump Power Vrs Speed Curve Based on Oil 500 cst
050
100150200250300350400450500550600650700
0 100 200 300 400 500 600 700
Cap
acity
-LP
M
Pump Speed - Rpm
GP20H Pump Capacity Vrs Speed Curve Based on Oil 500 cst
2 bar
4 bar
7 bar
2 bar
4 bar
7 bar
7 bar
4 bar 2 bar
2 bar
4 bar
7 bar
Model GP20H
Shipping Weight 45 lbs – 21 kgs
Model GP125
Shipping Weight 12lbs – 5.5kgs
GENERAL & CH
EMICAL
BITUM
ENFIRE
DISPENSER M
ACHIN
ESFO
OD
LUBRICATIO
NM
ARINE
OIL & GAS
REFRIGERATION
SUGAR
Albany Pumps
G: P Style:
www.albany-pumps.co.uk +44 (0) 1594 842 275
Design Options
Model GP20H
Model GP125
Bronze, Carbon bearingsVarious mechanical seal choices Bronze, PTFE & Ertalyte gears
Ertalyte bearings Various mechanical seal materials Choice of lip seal shaft sealing materials
Albany Standard Pumps Richter Works, Garnett Street, Bradford, W. Yorks BD3 9HB
Tel: +44 (0) 1274 725 351 Fax: +44 (0) 1274 742 467 e-mail: [email protected] www. albany-pumps.co.uk
Model DR3
We support Model DR3 with spares and we offer a repair service for installed pumps. Regretfully we cannot supply new pumps.
OTHER CORROSION RESISTANT PUMPS FROM ALBANY INCLUDE GUNMETAL, HASTELLOY, STAINLESS STEEL AND SUPER DUPLEX. SEE OUR GENERAL BROCHURE FOR DETAILS.
Albany Standard Pumps
FF range of Corrosion
Resistant Gear Pumps
Features
Composite construction
NYRIM housing, reinforced with stainless steel
Excellent corrosion resistance
Good abrasion resistance
Lightweight
Simple design
Cost effective
Various options
Applications
Sugar Industry – molasses, blackstrap, syrup, glucose
Paper Industry – soap sulphate, fatty esters, tallow, tall oil
Agriculture – farm effluent, liquid animal feeds and molasses
Mariculture – fish oils, cod liver oil, halibut liver oil, fish proteins, sperm oil, soft wastes
Chemical Industry – oils, polymers, acid
Many others – flavours, fragrances, chocolate, cocoa butter, edible oils
Albany Standard Pumps Richter Works, Garnett Street, Bradford, W. Yorks BD3 9HB
Tel: +44 (0) 1274 725 351 Fax: +44 (0) 1274 742 467 e-mail: [email protected] www. albany-pumps.co.uk
FF09
GENERAL & CH
EMICAL
BITUM
ENFIRE
DISPENSER M
ACHIN
ESFO
OD
LUBRICATIO
NM
ARINE
OIL & GAS
REFRIGERATION
SUGAR
OTHER CORROSION RESISTANT PUMPS FROM ALBANY INCLUDE GUNMETAL, HASTELLOY, STAINLESS STEEL AND SUPER DUPLEX.
SEE OUR GENERAL BROCHURE FOR DETAILS.
We support obsolete FF style pumps with spares and a repair service for installed pumps. FF pumps have been replaced by new P style pump.