ALARM CLOCK USER MANUAL - m.media-amazon.com
Transcript of ALARM CLOCK USER MANUAL - m.media-amazon.com
100*120mmFeatures
Alarm Setting
Automatic off Timer Wireless charging USB Phone Charging Port
• FM Radio 87.5-108 MHz • 5W Wireless Charging• 5V/1A USB Charging Port• 2 Alarm Sounds Available: Radio, Buzzer• 9 Minutes Snooze• Sleep Timer: Radio Auto-off Timer• 6-Level Display Dimmer• 0-30 Level Volume Adjustable• 12 Hour/24 Hour Time Display Format• 1 Alarm Setting• 99 FM Pre-Stored Stations• FM Auto-Search Station• FM Semi-Manual Search Station• Pre-Stored Radio Stations Manually
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Catalog We, at Reacher, thank you for your purchase. The utmost care has gone into the design and manufacturing of your clock. Please read the following instructions and keep this User Manual in a safe place, for future reference.
We made an instructional video on YouTube (you can find the link below) and QR code; you only need to scan the code or enter the video link and you will be able to access the intuitive operation of the alarm clock radio.
Instructional Video
https://youtu.be/WgVje4Y0oWcTIME SET: Enter the time setting SET ON/OFF: Enter the alarm setting/Turn ON/OFF the alarmSLEEP TIMERSnooze/DimmerSET-: Adjust the Time / Alarm / Radio Channel / Time Display FormatSET+: Adjust the Time / Alarm / Radio Channel / Time Display FormatRADIO ON/OFF/SCAN (Long Press)WIRELESS CHARGING INDICATOR: Light up = Charging Your DeviceFlashes = Charging Error
13
14
15
16
17
18
19
13
14
15
16
17
18
19
VOL+: Increase the volume VOL-: Reduce the volume
USB CHARGING PORTDC IN
8
8
Battery Component: Install 2 AAA batteries to save all settings20
20
9
1
1
2
2
3
3
4
4
12 5
5
6 7
9
10
10
11
11 Blink
1. The default TIME is 12:00 AM2. The default ALARM is 7:00 AM
1. Press the “TIME SET” button to enter the time setting, press the “SET-” or “SET+” button to set the hour.
2. Press the “TIME SET” button to confirm the hour setting and enter the minute setting. Press the “SET-” or “SET+” button to set the minute.
Note:
1. Long press “SET-” or “SET+” button for quick adjustment.2. If you select the time display format mode 12H, the “PM” indicator will appear in the afternoon, the “AM” indicator will appear in the morning.3. If you select the time display format 12H, please make sure you choose the correct setting, AM/PM.
If you select the time display format 12H, please make sure you choose the correct setting, AM/PM.
Note:
Note:
When you select the alarm sound, if there is no other operation, the alarm sound will last for 10 seconds and then exit the alarm setting.
1. Press “VOL+” or “VOL-” button to adjust the alarm volume, 5-30 levels are adjustable.2. Long press “VOL+” or “VOL-” for quick adjustment.3. When you adjust the volume, you can listen for 5 seconds to confirm whether the volume is at the preferred level.
Note:
You can adjust and save the alarm volume in any mode except radio mode.
Note:
Appear when the radio is onAuto-Search the channels
Appear when the radio is onBlink
1 2
TOP PANEL FRONT PANEL
3
RADIO INDICATOR: Light on=The Alarm Sound is RadioBUZZER INDICATOR: Light on= The Alarm Sound is BuzzerSNOOZE INDICATORRADIO INDICATOR: Light on=The Radio is Turned onSLEEP INDICATOR: Light on=The Sleep Timer is onAM INDICATOR: Light on=AMPM INDICATOR: Light on=PMPlug the adapter into a standard household outlet to get the clock working.
Insert two (2) new “AAA” batteries (not included) to preserve all settings in case of power interruption. 6
7
12
4
BACK PANEL
BOTTOM PANEL
Alarm Volume Adjustment
1. Press and hold the “ SET ON/OFF” button for 2 seconds to turn on/off the alarm.2. When the alarm is turned on, the corresponding indicator (RADIO/ BUZZER) will be light up. The alarm will go off on the set alarm time.3. When the alarm is turned off, the corresponding indicator (RADIO/ BUZZER) will not appear. The alarm will not go off.
Turn on/off Alarm
5
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
Getting Started
Time Setting
6
3. Press the “TIME SET” button to confirm the minute setting and enter the time display format setting (12h/24h).
4. Press the “SET-” or “SET+” button to select the time display format: 24h: Military time 12h: 12-hour clock
1. Press the “ SET ON/OFF” button to enter the alarm setting, press the “SET-” or “SET+” button to set the hour.
3. Press the “ SET ON/OFF” button to confirm the minute setting and enter the alarm sound setting.
4. Press the “SET-” or “SET+” button to select the alarm sound:
BUZ: The alarm sound is buzzer and the “BUZZER” indicator will light up
5. Press the “ SET ON/OFF” button to confirm and exit the alarm setting.
2. Press the “ SET ON/OFF” button to confirm the hour setting and enter the minute setting. Press the “SET-” or “SET+” button to set the minute.
1. When the radio turns on, short press the “SLEEP TIMER” button to enable the automatic off timer. The “SLEEP” indicator and the sleep time will appear (The default sleep time is 5 minutes with “05” on the LED display).
Place your phone in the "WIRELESS CHARGER" position and the top panel indicator will light up if the phone has been placed correctly. When fully charged, the light will go out.
USB charging port for charging your mobile phone.
Battery Backup
The battery will maintain all settings if the power is interrupted. There will be no display and the ALARM will not sound under battery power. If there is no battery and the power is interrupted, the ALARM/TIME/RADIO will need to be reset.
Care of Your Clock
Replace the backup battery annually or store the clock without a battery when not in use. A soft cloth or a paper towel may be used to clean your clock. Do not use any corrosive cleaner or chemical solutions on the clock. Keep the clock clean and dry to avoid problems.
Support
Contact [email protected]. We will respond to your email within 24 hours.
2. By pressing again the “SLEEP TIMER” button to cycle select 5, 30, 45, 60, 75, 90, 105, 120 minutes or OFF. (“OFF” means the timer is disabled.)
5. Press the “TIME SET” button to confirm and exit the time setting.
Light up
Indicator
Select timer time
Blink
RAD7
15 16 17
8 9 10 11
1. When the alarm goes off, press any top panel button except the "SNOOZE/ DIMMER" button to stop the alarm. It will ring the next day at the same time.2. If there is no other operation, the alarm will stop after 30 minutes.
Stop Alarm
Manually Search FM Channel1. Short press the "RADIO ON / OFF / SCAN (long press)" button to turn on the radio. 2. Press and hold the "SET-/SET+" button for 2 seconds to search the channel, when a radio station is found, stop searching and play the searched radio channel.
Radio MemoryThe clock radio can save up to 99 radio stations, allowing for quick access.1. Press and hold the "SLEEP TIMER" button for 2 seconds until “P01” flashes. Press the “SLEEP TIMER” button again to store the Station 1.
Play the Pre-Stored StationsIn radio mode, short press the SET-/SET+" button once to select the radio station from the list.
Radio Volume Adjustment1. Press the “VOL+” or “VOL-” button to adjust the radio volume, 0-30 levels are adjustable.2. Long press the “VOL+” or “VOL-” for quick adjustment.
2. Search the second desired station, long-press the “SLEEP TIMER” button until “P01” flashes. Then, press the “SET+” button, when “P02” appears and flashed, press the “SLEEP TIMER” button once again to store the Station 2.3. Repeat the above procedure to store more radio stations.
AUTO Search FM Channel1. Press and hold the "RADIO ON / OFF / SCAN (long press)" button for 2 seconds to turn on the radio. 2. It will automatically start searching for radio stations from 87.5MHz to 108MHz. The searched radio channels will be stored automatically; up to 99 channels can be stored.
12 13 14
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
BUZ
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
1. Instructional Video ....................................................................2. Features ..................................................................................3. Getting Started ..........................................................................4. Product View ...........................................................................5. Time Setting ............................................................................6. Alarm Setting ........................................................................... 1) Alarm Volume Adjustment .............................................................. 2) Turn ON/OFF Alarm ...................................................................... 3) Stop Alarm .....................................................................................7. SNOOZE ................................................................................8. FM Radio Feature .................................................................. 1) Set up FM antenna ........................................................................ 2) AUTO Search FM Channel ........................................................... 3) Manually Search FM Channel ...................................................... 4) Radio Memory .............................................................................. 5) Play the Pre-Stored Stations ........................................................ 6) Radio Volume Adjustment ............................................................ 7) Automatic off Timer ......................................................................9. Using the Dimmer .................................................................10. Wireless Charging ...............................................................11. USB Phone Charging Port ...................................................12. Battery Backup ....................................................................13. Care of Your Clock ...............................................................14. Support ................................................................................
122368
111111121212131314141415151617171717
FM Antenna
Light out = No Device Charging
The corresponding ringtone indicator will light up
RAD: The alarm sound is the radio and the “RADIO” indicator will light up
Note:The default alarm sound is radio, 87.5MHz. If you choose the radio as the alarm sound, the last channel you listen to will be the ringtone.
SNOOZE
When the alarm goes off, you can press the “SNOOZE/DIMMER” button to snooze for a while. After 9 minutes, the alarm will go off again.
1. The alarm can snooze 6 times. After the seventh snooze, the alarm will go silent.2. If no action is taken when the alarm goes off, the alarm will stop after 30 minutes.
FM Radio Feature
Set up FM antennaExtend the FM wire antenna fully and vary the direction for the best FM reception.
Using the Dimmer
Press the “SNOOZE/DIMMER” button to set the display brightness to Bright/30% Dim/50% Dim/75% Dim/90% Dim/OFF.
Note:When the alarm is triggered, this button plays the role of “snooze” instead of “dimmer”.
Made in China
ALARM CLOCK USER MANUAL
ACR-WYM-186
English 1 - 17Deutschland 18 - 34
Italian 52 - 68French 35 - 51
EnglishGet support via [email protected]
5.Drücken Sie den “ SET ON/OFF” Knopf um die Einstellungen zu beenden.
100*120mm
RADIOWECKER USER MANUAL
Eigenschaften
Alarm Einstellungen:
Automatisches Ausschalten Kabelloses Aufladen Per USB Aufladen
• FM Radio 87.5-108 MHz • 5W kabelloses Aufladen• 5V/1A USB Ladestation • 2 Wecktöne zur auswahl: Radio und standart Klingeln• 9 minütige Snoozefunktion• Schlaftimer: Automatisches Ausschalten des Radios • 6-Level Display Dimmer• 0-30 Level Lautstärkeeinstellung
• 12 Stunden/ 24 Stunden Zeitformat • 1 Alarm einstellen• 99 FM Stationen speichern• Automatische FM Suche • Semi-Automatische FM Suche• Manuelles Einspeichern von FM Stationen
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Katalog Wir, bei Reacher, danken Ihnen für Ihren Einkauf. Ihre Radioweckerwurde mit äußerster Sorgfalt hergestellt und designed. Bitte lesenSie die Folgende Anleitung und bewahren Sie diese Anleitung aneinem sichern Ort auf auf.
Wir haben für Sie ein Einführungsvideo auf Youtube (den Link finden Sie oben), oder als QR Code bereitgestellt; Sie müssen nur den Code anscannen oder den Link in ihren Browser kopieren um das den Wecker erklärende Video anschauen zu können.
Einführungsvideo
https://youtu.be/WgVje4Y0oWcTIME SET: Geben Sie die Zeiteinstellung ein
ACHTUNG: Lautstärkeregelung auf der Rückseite
SET ON/ OFF: Geben Sie die Alarmzeit ein/ Schalten Sie den Alarm AN/ AUS SchlaftimerSnoozefunktion/ DimmerSET -: Stellen Sie Zeit/ Alarm/ Radiosender/ Zeitformat ein SET +: Stellen Sie Zeit/ Alarm/ Radiosender/ Zeitformat ein RADIO ON/OFF/SCAN (Lange drücken)Kabelloses Aufladen Indikator:Leuchtet = Ihr Gerät wird geladen Blinkt = Ladefehler
13
14
15
16
17
18
19
13
14
15
16
17
18
19
VOL +: Erhöht die LautstärkeVOL - : Reduziert die Lautstärke
USB LADEKABELDC IN
8
8
Batteriekomponente: Legen Sie 2 AAA Batterien ein um alle Einstellungen zu speichern
20
20
9
1
1
2
2
3
3
4
4
12 5
5
6 7
9
10
10
11
11 Blink
1. Die Standartzeit ist 12:00 AM
2. Die Standard Weckzeit ist 7:00 AM
1. Drücken Sie “TIME SET” um die Ezeit einzustellen, drücken Sie “SET -” oder “SET+” um die Stunden einzustellen.
2. Drücken Sie “TIME SET” um die Stunden zu bestätigen und die Minuten einzugeben, drücken Sie “SET -” oder “SET+” um die Minuten einzustellen.
Wichtig:
1.Drücken Sie “SET-” oder “SET +” für schnelle Einstellungen.2.Wenn Sie das 12-Stündige Zeitformat wählen, erscheint am Nachmittag der PM Indikator, am Morgen der AM Indikator.3.Wenn Sie das 12-Stündige Zeitformat wählen, stellen Sie sich, dass das korrekte Zeitformat ausgewählt ist.
Wenn Sie das 12-Stündige Zeitformat wählen, stellen Sie sich, dass das korrekte Zeitformat ausgewählt ist (AM/PM).
Wichtig:
Wichtig:
Wenn Sie den Alarmton auswählen und keine andere Operation ausgeführt wird, hält der Alarmton 10 Sekunden lang an und beendet dann die Alarmeinstellung.
1.Drücken Sie “VOL+” oder “VOL-” und die Lautstärke einzustellen. Ihnen stehen Level 5-30 zur Auswahl.2.Drücken Sie “VOL+” oder “VOL-” lange um schnell durch die Optionen zu laufen3.Haben Sie sich für eine Lautstärke entschieden, hören Sie 5 Sekunden lang den Weckton um ihn bestätigen zu können.
Wichtig:
Sie können den Weckton in jedem Modus ändern, mit Ausnahme des Radiomodus.
Wichtig:
Erscheint wenn das Radio an istAutomatische Sendersuche
Erscheintwenn das Radio eingeschaltet istBlink
18 19
TOP PANEL FRONT PANEL
20
RADIO INDIKATOR: Licht an = das Weckgeräusch ist das Radio WECKER INDIKATOR: Licht an = das Weckgeräusch ist Standartklingeln SNOOZEFUNKTION INDIKATORRADIO INDIKATOR: Licht an = Das Radio ist an SCHLAF INDIKATOR: Licht an = der Schlaftimer ist an AM INDIKATOR: Licht an = AMPM INDIKATOR: Licht an = PMStecken Sie den Adapter in eine Standartsteckdose um den Wecker
einzuschalten. PM Indikator: Licht an = PMLegen Sie 2 AAA Batterien ( nicht inklusive) ein, um alle Einstellungen beizubehalten, falls einmal der Strom ausfällt.
6
7
12
21
RÜCKSEITEN PANEL
UNTERES PANEL
Weckerlautstärke einstellen
1.Drücken Sie den “ SET ON/OFF” Knopf für 2 Sekunden um den Alarm an/ aus zu schalten.2.Wenn der Alarm eingeschaltet ist, leuchtet der korrespondierende Indikator (RADIO/ BUZZER) auf. Der Alarm wird nun zum gewählten Zeitpunkt klingeln.
3.Wenn der Alarm ausgeschaltet ist, leuchtet der korrespondierende Indikator (RADIO/ BUZZER) nicht auf. Der Alarm wird nicht klingeln.
Wecker an/ ausschalten
22
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
Schneller Einstieg
Zeiteinstellung
23
3. Drücken Sie “TIME SET” um die Minuten zu bestätigen. Und geben Siedas Zeitformat ein (12H/ 24H).
4.Drücken Sie “SET-” oder “SET+” um das Zeitformat zu wählen: 24H: Militärzeit 12H: 12 Stunden Uhr
1.Drücken Sie den “ SET ON/OFF” Knopf um die Weckeinstellungen einzugeben, drücken Sie “SET-” oder “SET +” um die Stunde auszuwählen.
3. Drücken Sie den “ SET ON/OFF” Knopf um die Minuteneinstellung zu bestätigen und geben Sie den Weckton ein (Der korrespondierende Indikator wird aufleuchten)
4.Drücken Sie “SET-” oder “SET +” um den Alarm auszuwählen:
BUZ: Der Weckerton ist Standard und der “BUZZER” Indikator leuchtet auf
2.Drücken Sie den “ SET ON/OFF” Knopf um die Stundeneinstellung zu bestätigen, drücken Sie “SET-” oder “SET +” um die Minute auszuwählen.
1.Sobald das Radio eingeschaltet ist, drücken Sie kurz die “SLEEPTIMER” Taste und das automatische Ausschalten zu aktivieren. Der “SLEEP” Indikator und die Zeit werden erscheinen (Voreingestellt sind 5 Minuten mit “05” auf dem Display).
Platzieren Sie ihr Smartphone in der “WIRELESS CHARGER” Position, und der Indikator im oberen Paneel wird aufleuchten, sobald das Smartphone korrekt platziert wurde. Sobald der Akku komplett geladen ist, wird das Licht ausgehen.
USB Kabel um ihr Smartphone aufzuladen.
Batterie Unterstützung
Die Batterie wird dafür sorgen, dass alle Einstellungen bestehen bleiben, sollte die Stromversorgung unterbrochen werden. Es wird keine Anzeige angezeigt und der ALARM ertönt unter Batteriestrom nicht. Sollte keine Batterie eingesetzt sein, müssen ALARM/ZEIT/RADIO neu eingestellt werden.
Pflege ihrer Radiowecker
Ersetzen Sie die Batterie jährlich und entfernen Sie sie, sollte die Radiowecker nicht verwendet werden. Zur Reinigung der wecker kann ein weiches Tuch oder ein Papiertuch verwendet werden. Verwenden Sie keine korrodierenden Reiniger oder chemische Wirkstoffe. Halten Sie die Radiowecker sauber und trocken um Probleme zu vermeiden.
Kundensupport
Kontaktieren Sie [email protected]. Wir werden innerhalb von 24 Stunden auf ihre Email antworten.
2.Drücken Sie erneut die “SLEEPTIMER” Taste um 5, 30, 45, 60, 75, 90, 105, 120 Minuten oder AUS zu wählen. (“OFF” heißt der Timer ist ausgeschaltet.)
5.Drücken Sie “TIME SET” um alles zu bestätigen und die Zeiteinstellungen zu verlassen
Leuchten
Indikator
Timerzeit auswählen
Blink
RAD24
32 33 34
25 26 27 28
1.Wenn der Alarm ausgeht, können sie jeden Knopf außer die “SNOOZE/DIMMER” Taste drücken um ihn auszuschalten. Er wird am nächsten Tag zur selben Zeit klingeln.
2.Wird nach klingeln des Weckers keine Aktion ausgeführt, geht er nach 30 Minuten automatisch aus.
Alarm stoppen
Manuelles Suchen von FM Sendern 1. Drücken Sie kurz die Taste “RADIO ON/OFF/ SCAN (long press)” , um das Radio einzuschalten.2. Drücken Sie den “SET ON/OFF” Knopf für 2 Sekunden um den Sender zu suchen, wenn ein Sender gefunden wurde, stoppen Sie die Suche und der gefundene Sender wird abgespielt.
Radiosender speichernDer Radiowecker kann bis zu 99 Stationen speichern, auf die Sie schnell zugreifen können.1.Drücken Sie die “SLEEPTIMER” Taste und halten Sie sie gedrückt bis “PO1” aufleuchtet. Drücken Sie die “SLEEPTIMER” Taste erneut um Station 1 zu speichern.
Gespeicherte Stationen abrufenDrücken Sie im Radiomodus kurz den “SET-/SET” Knopf, um eine Station ihrer Liste zu wählen.Einstellen der Radiolautstärke
1. Drücken Sie “VOL+” oder “VOL-” und die Lautstärke einzustellen. Ihnen stehen Level 0-30 zur Auswahl.2. Drücken Sie “VOL+” oder “VOL-” lange um schnell durch die Optionen zu laufen
2.Suchen Sie den zweiten Sender, drücken Sie die “SLEEPTIMER” Taste und halten Sie sie gedrückt bis “PO1” aufleuchtet. Drücken Sie nun die “SET+” Taste. Wenn “PO2” aufleuchtet, drücken Sie die “SLEEPTIMER” Taste erneut um Station 2 zu speichern.
3.Wiederholen Sie diesen Vorgang um weitere Stationen zu speichern.
Automatisches Suchen von FM Sendern1.Drücken und halten Sie die “RADIO ON/OFF/ SCAN (long press)” Taste für 2 Sekunden, um das Radio einzuschalten.2.Es wird automatisch nach Sendern zwischen 87.5 MHz und 120 MHz suchen. Die gefundenen Radiosender werden automatisch gespeichert, bis zu 99 Sender können gespeichert werden.
29 30 31
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
BUZ
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
1. Einführungsvideo ....................................................................2. Eigenschaften .........................................................................3. Schneller Einstieg ...................................................................4. Produktansicht ........................................................................5. Zeiteinstellung .........................................................................6. Weckereinstellung .................................................................. 1) Weckerlautstärke anpassen .......................................................... 2) Alarm ON/OFF ............................................................................. 3) Alarm ausschalten/Alarm stoppen ................................................7. SNOOZEFUNKTION .............................................................8. FM Radiofunktion ................................................................. 1) Die FM Antenne einstellen ............................................................
2) Automatisches Suchen nach FM Stationen .................................. 3) Manuelles Suchen nach FM Stationen ......................................... 4) Sender speichern ......................................................................... 5) Gespeicherte Sender einstellen ................................................... 6) Einstellen der Radiolautstärke ..................................................... 7) Automatisches Ausschalten .........................................................9. Den Dimmer verwenden ........................................................10. Kabelloses Aufladen ............................................................11. USB Aufladen ......................................................................12. Sicherheitsbatterie ...............................................................13. Kümmern Sie sich um den Wecker ....................................14. Kundendienst ......................................................................
181919202325282828292929303031313132323334343434
FM Antenna
ACR-W
Licht aus = Kein Gerät gefunden
YM-186
Die entsprechende Klingeltonanzeige leuchtet auf
RAD: Der Weckton ist das Radio und der Radioindikator leuchtet auf
Wichtig:Grund eingestellt ist die Frequenz 87.5Mhz. Wenn Sie das Radio als Wecker auswählen, wird die Station, welche sie zuletzt gehört haben ihr Weckerton sein.
SNOOZEFUNKTION
Wenn der Alarm ausgeht, können sie die “SNOOZE/DIMMER” Taste drücken um die Snoozefunktion zu aktivieren.Nach 9 Minuten wird der Wecker erneut klingeln.1.Der Alarm kann 6 mal verschoben werden. Nach dem siebten mal wird er ausgeschaltet.2.Wird nach klingeln des Weckers keine Aktion ausgeführt, geht er nach 30 Minuten automatisch aus.
FM RADIOFUNKTION
Die FM Antenne einstellenFahren Sie die FM Antenne komplett aus und bewegen Sie sie, bis Sie das beste Signal erhalten.
Den Dimmer nutzen
Drücken Sie die “SNOOZE/DIMMER” Taste um die Helligkeit auf Bright/30% Dim/50%Dim/75% Dim/90% Dim/OFF einzustellen.
WichtigWährend der Alarm ausgelöst wird, fungiert die Taste als “Snoozefunktion” statt “Dimmer”. Made in China
DeutschlandErhalten Sie Unterstützung über [email protected]
5. Appuyez sur la touche " SET ON/OFF" pour confirmer et quitter le réglage de l'alarme.
100*120mm
ALARME MANUEL DE L'UTILISATEUR
Caractéristiques
Réglage de l'Alarme
Arrêt automatique de la Minuterie Chargeur sans fil Port de charge USB du téléphone
• Radio FM 87,5-108 MHz • Chargeur sans fil 5W• Port de charge USB 5V/1A• 2 musiques d'alarme disponibles : Radio, Buzzer• 9 minutes de sieste• Sleep Timer : Minuterie d'arrêt automatique de la radio• Régulateur d'affichage à 6 niveaux• 0-30 Niveau Volume ajustable• Format d'affichage de l'heure 12 heures/24 heures• 1 Réglage de l'alarme• 99 stations FM pré-enregistrées• Recherche automatique de stations FM• Recherche semi-manuelle de stations FM• Stations de radio préenregistrées manuellement
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Catalogue La société Reacher vous remercie pour votre achat. Nous avons accordé une attention toute particulière à la conception et à la fabrication de votre horloge. Veuillez lire les instructions suivantes et conserver ce manuel d'utilisation dans un endroit sûr, pour référence future.
Une vidéo didactique a été réalisée et est accessible sur YouTube(vous trouverez le lien ci-dessous). Il vous suffit de scanner le code ou d'entrer le lien de la vidéo pour visionner le fonctionnement intuitif du réveil.
Vidéo didactique
https://youtu.be/WgVje4Y0oWcTIME SET: Saisir l'heure
ACHTUNG: Lautstärkeregelung auf der Rückseite
SET ON/OFF: Saisir le réglage de l'alarme / Activer / Désactiver l'alarmeSLEEP TIMERVeille / RégulateurSET- : Régler l'heure / l'alarme / le canal radio / le format d'affichage de l'heure SET+: Régler l'heure / l'alarme / le canal radio / le format d'affichage de l'heure RECHERCHE RADIO MARCHE/ARRET (appuyer longuement) INDICATEUR DE CHARGE SANS FIL :Allumer = Charger votre appareilFlashs = erreur de chargeÉteindre la lumière = Pas d'appareil en charge
13
14
15
16
17
18
19
13
14
15
16
17
18
19
VOL+ : Augmenter le volumeVOL- : Réduire le volume
PORT DE CHARGE USBCâble CC (courant continu)
8
8
Composant de la batterie : Installer 2 piles AAA pour sauvegarder tous les réglages
20
20
9
1
1
2
2
3
3
4
4
12 5
5
6 7
9
10
10
11
11 Blink
1. L'HEURE par défaut est 12h002. L'ALARME par défaut est 7h00 du matin
1.Appuyez sur la touche "TIME SET" pour accéder au réglage de l'heure, appuyez sur la touche "SET-" ou "SET+" pour régler l'heure.
2. Appuyez sur la touche "TIME SET" pour confirmer le réglage des heures et passer au réglage des minutes. Appuyez sur la touche "SET-" ou "SET+" pour régler les minutes.
Remarque :
Si vous sélectionnez le format d'affichage de l'heure 12H, assurez-vous de choisir le bon réglage, AM/PM.
Remarque :
Remarque :
Lorsque vous sélectionnez la musique de l'alarme, s'il n'y a pas d'autre opération, l'alarme durera 10 secondes et quittera ensuite le réglage de l'alarme.
1. Appuyez sur la touche "VOL+" ou "VOL-" pour régler le volume de l'alarme, 5 à 30 niveaux sont réglables.2. Appuyez longuement sur "VOL+" ou "VOL-" pour un réglage rapide.3. Lorsque vous réglez le volume, vous pouvez écouter pendant 5 secondes pour confirmer si le volume est au niveau souhaité.
Remarque :
Vous pouvez régler et enregistrer le volume de l'alarme dans n'importe quel mode, sauf en mode radio.
Remarque :
Apparaît lorsque la radio est alluméeRecherche automatique des canaux
Apparaît lorsque la radio est alluméeBlink
35 36
PANNEAU SUPÉRIEUR PANNEAU AVANT
37
INDICATEUR RADIO : Lumière allumée=L'horloge sonore est la radio INDICATEUR DE BUZZER : Lumière allumée= L'horloge sonore est un buzzer
INDICATEUR DE VEILLEINDICATEUR RADIO : Lumière allumée=La radio est allumée
INDICATEUR DE SOMMEIL : Lumière allumée=La fonction "Sleep Timer" est activée
INDICATEUR AM : Lumière allumée = AM activéINDICATEUR PM : Lumière allumée = PM activé
Branchez l'adaptateur dans une prise de courant standard pour faire fonctionner l'horloge. Insérez deux (2) piles "AAA" neuves (non fournies) pour sauvegarder tous les réglages en cas d'interruption de l'alimentation électrique.
6
7
12
38
PANNEAU ARRIÈRE
PANNEAU SUPÉRIEUR
Réglage du volume de l'alarme
1. Appuyez sur la touche " SET ON/OFF" pendant 2 secondes pour activer/désactiver l'alarme.2. Lorsque l'alarme est activée, l'indicateur correspondant (RADIO/ BUZZER) s'allume. L'alarme se déclenchera à l'heure programmée.3. Lorsque l'alarme est désactivée, l'indicateur correspondant (RADIO/ BUZZER) n'apparaîtra pas. L'alarme ne se déclenchera pas.
Activation/désactivation de l'alarme
39
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
Pour commencer
Réglage de l'heure
40
3. Appuyez sur la touche "TIME SET" pour confirmer le réglage des minutes et passer au réglage du format d'affichage de l'heure (12h/24h).
4.Appuyez sur la touche "SET-" ou "SET+" pour sélectionner le format d'affichage de l'heure :
24h : Système horaire 24h : 12h : Horloge 12 heures
1.Appuyez sur la touche " SET ON/OFF" pour accéder au réglage de l'alarme, appuyez sur la touche "SET-" ou "SET+" pour régler l'heure.
3.Appuyez sur la touche " SET ON/OFF" pour confirmer le réglage des minutes et entrer le réglage de la sonnerie de l'alarme.
4. Appuyez sur la touche "SET-" ou "SET+" pour sélectionner le son de l'alarme :RAD : Le son de l'alarme est celui de la radio et le voyant "RADIO" s'allume
BUZ : Le son de l'alarme est un buzzer et l'indicateur "BUZZER" s'allume.
2. Appuyez sur la touche " SET ON/OFF" pour confirmer le réglage des heures et entrer le réglage des minutes. Appuyez sur la touche "SET -" ou "SET +" pour régler les minutes.
1. Lorsque la radio s'allume, appuyez brièvement sur le bouton "SLEEP TIMER" pour activer la minuterie d'arrêt automatique. L'indicateur "SLEEP" et le temps de veille s'afficheront (Le temps de veille par défaut est de 5 minutes avec "05" sur l'affichage LED).
Placez votre téléphone dans la position "WIRELESS CHARGER" et le voyant du panneau supérieur s'allumera si le téléphone a été placé correctement. Lorsqu'il est complètement chargé, le voyant s'éteint.
Port USB de charge pour recharger votre téléphone portable.
Batterie de secours
La batterie conservera tous les réglages si l'alimentation est interrompue. Il n'y aura pas d'affichage et l'ALARME ne retentira pas si la batterie est chargée. S'il n'y a pas de batterie et que l'alimentation est interrompue, l'ALARME/TIME/RADIO devra être réinitialisée.
Entretien de votre réveil
Remplacez la pile relais chaque année ou rangez l'horloge sans pile lorsqu'elle n'est pas utilisée. Un chiffon doux ou une serviette en papier peuvent être utilisés pour nettoyer votre horloge. N'utilisez pas de nettoyant corrosif ou de solutions chimiques sur l'horloge. Pour éviter tout problème, veillez à ce que l'horloge soit propre et sèche.
Service clientèle
Contactez [email protected]. Nous répondrons à votre courriel sous 24 heures.
2. En appuyant à nouveau sur le bouton "SLEEP TIMER", vous pouvez sélectionner 5, 30, 45, 60, 75, 90, 105, 120 minutes ou ARRÊT. ("OFF" signifie que la minuterie est désactivée).
5. Appuyez sur la touche "TIME SET" pour confirmer et quitter le réglage de l'heure.
1. Appuyez longuement sur la touche "SET-" ou "SET+" pour un réglage rapide.
Leuchten
Indikator
Timerzeit auswählen
Blink
RAD
41
49 50 51
42 43 44 45
1. Lorsque l'alarme se déclenche, appuyez sur n'importe quel bouton du panneau supérieur, à l'exception du bouton "SNOOZE/ DIMMER", pour arrêter l'alarme. Elle sonnera le jour suivant à la même heure.
2. S'il n'y a pas d'autre opération, l'alarme s'arrête au bout de 30 minutes.
Arrêt de l'alarme
Recherche manuelle d'une chaîne FM1. Appuyez brièvement sur le bouton "RADIO ON / OFF / SCAN (pressione lunga)" pour allumer la radio. 2. Appuyez sur la touche "SET-/SET+" pendant 2 secondes pour rechercher le canal. Lorsqu'une station de radio est trouvée, arrêtez la recherche et écoutez le canal radio recherché.
Mémoire de la radioLe réveil radio peut enregistrer jusqu'à 99 stations de radio, ce qui permet un accès rapide.1. Appuyez sur la touche "SLEEP TIMER" et maintenez-la enfoncée pendant 2 secondes jusqu'à ce que "P01" clignote. Appuyez à nouveau sur le bouton "SLEEP TIMER" pour mémoriser la station.
Lecture des stations préenregistréesEn mode radio, appuyez brièvement sur la touche SET-/SET+" une fois pour sélectionner la station de radio dans la liste.Réglage du volume de la radio
1. Appuyez sur la touche "VOL+ " ou "VOL-" pour régler le volume de la radio, les niveaux 0-30 sont réglables.2. Appuyez longuement sur la touche "VOL+" ou "VOL-" pour un réglage rapide.
2. Recherchez la deuxième station souhaitée, appuyez longuement sur le bouton "SLEEP TIMER" jusqu'à ce que "P01" clignote. Ensuite, appuyez sur la touche "SET+", lorsque "P02" apparaît et clignote, appuyez à nouveau sur la touche "SLEEP TIMER" pour mémoriser la station.
3. Répétez la procédure ci-dessus pour mémoriser d'autres stations de radio.
Recherche AUTOMATIQUE d'une station FM1. Appuyez sur le bouton "RADIO ON / OFF / SCAN (pressione lunga)" pendant 2 secondes pour allumer la radio. 2. La recherche des stations de radio de 87,5 MHz à 108 MHz démarre automatiquement. Les canaux radio recherchés seront automatiquement mémorisés ; jusqu'à 99 canaux peuvent être mémorisés.
46 47 48
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
BUZ
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
1. Vidéo didactique .....................................................................2. Caractéristiques .......................................................................3. Pour commencer .....................................................................4. Aperçu du produit........................................................................5. Réglage de l'heure.........................................................................6. Réglage de l'alarme ................................................................. 1) Réglage du volume de l'alarme ....................................................... 2) Activation/désactivation de l'alarme ................................................ 3) Arrêt de l'alarme ..........................................................................7. VEILLE ....................................................................................8. Caractéristiques des stations FM ........................................... 1) Installation de l'antenne FM .............................................................
2) Recherche AUTOMATIQUE d'une chaîne FM ............................... 3) Recherche manuelle d'une chaîne FM .......................................... 4) Mémoire de la radio ....................................................................... 5) Lecture des stations préenregistrées ............................................. 6) Réglage du volume de la radio ....................................................... 7) Arrêt automatique de la minuterie ..................................................9. Utilisation du régulateur ..........................................................10. Chargeur sans fil ...................................................................11. Port de charge USB du téléphone .........................................12. Batterie de secours ...............................................................13. Entretien de votre réveil .......................................................14. Service clientèle ....................................................................
353636374042
45 45 45 46 46 46 47 47 48 48 48 49 49 50 51 51 51 51
FM Antenna
ACR-WYM-186
The Le voyant de la sonnerie correspondante s'allumera up
Remarque :La musique d'alarme par défaut est la radio, 87,5MHz. Si vous choisissez la radio comme sonnerie d'alarme, la dernière chaîne que vous écoutez sera la sonnerie.
VEILLE
Lorsque l'alarme se déclenche, vous pouvez appuyer sur le bouton "SNOOZE/ DIMMER" pour faire une petite sieste. Au bout de 9 minutes, l'alarme se déclenche à nouveau.1. L'alarme peut se répéter 6 fois. Après la septième répétition de réveil, l'alarme se coupe.2. Si aucune mesure n'est prise lorsque l'alarme se déclenche, l'alarme s'arrête au bout de 30 minutes.
Caractéristiques des stations FM
Installation de l'antenne FMDéployez complètement l'antenne filaire FM et modifiez la direction pour obtenir la meilleure réception FM.
Utilisation du régulateur
Appuyez sur la touche "SNOOZE/DIMMER" pour régler la luminosité de l'écran sur Luminosité/30% Rég/50% Rég/75% Rég/90% Rég/ARRÊT.
Remarque :Lorsque l'alarme est déclenchée, ce bouton joue le rôle de "snooze" au lieu de "dimmer". Made in China
FrenchObtenez de l'aide via [email protected]
2. Si vous sélectionnez le mode de format d'affichage de l'heure 12H, l'indicateur "PM" apparaîtra l'après-midi, l'indicateur "AM" apparaîtra le matin.3. Si vous sélectionnez le format d'affichage de l'heure 12H, assurez-vous que vous choisissez le bon réglage, AM/PM.
5. Premere il pulsante " SET ON/OFF" per confermare e uscire dall'impostazione della sveglia.
100*120mm
OROLOGIO SVEGLIA MANUALE UTENTE
Caratteristiche
Impostazione della sveglia:
Timer di spegnimento automatico Ricarica senza fili Porta di ricarica del telefono USB
• Radio FM 87.5-108 MHz • Ricarica senza fili 5W• Porta di ricarica USB 5V/1A• 2 Suoni di sveglia disponibili: Radio, Segnale acustico• 9 Minuti Sonnellino• Sleep Timer: Radio Autospegnimento Timer• display regolabile a 6 livelli• 0-30 Livello Volume regolabile• Formato di visualizzazione 12 ore/24 ore• 1 Impostazione dell'allarme• 99 stazioni FM pre-memorizzate• Stazione di ricerca automatica FM• Stazione di ricerca FM Semi-Manuale• Stazioni radio pre-memorizzate manualmente
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Catalogo Noi di Reacher ti ringraziamo per il tuo acquisto. La massima cura è stata dedicata alla progettazione e alla produzione del tuo orologio. Ti preghiamo di leggere le seguenti istruzioni e di conservare questo Manuale d'uso in un luogo sicuro, per riferimenti futuri.
Abbiamo realizzato un video didattico su YouTube (puoi trovare il link qui sotto) e il codice QR; basta scansionare il codice o inserire il link del video e potrai accedere al funzionamento intuitivo della radiosveglia.
Video di istruzioni
https://youtu.be/WgVje4Y0oWc TIME SET: Inserisci l'impostazione dell'ora
ACHTUNG: Lautstärkeregelung auf der Rückseite
SET ON/OFF: Inserire l'impostazione dell'allarme/accendere e spegnere l'allarme SLEEP TIMER Snooze/DimmerSET-: Regola il formato di visualizzazione dell'ora / Allarme / Canale Radio / Tempo SET+: Regola l'ora / Allarme / Canale Radio / Formato di visualizzazione dell'ora RADIO ON/OFF/SCAN (stampa lunga)INDICATORE DI CARICA SENZA FILI:Accendi = Ricarica il tuo dispositivoLampeggia = Errore di carica Luce spenta = Nessun dispositivo in carica
13
14
15
16
17
18
19
13
14
15
16
17
18
19
VOL : Aumentare il volumeVOL-: Ridurre il volume
PORTA DI RICARICA USBDC IN
8
8
Componente della batteria: Inserire 2 batterie AAA per salvare tutte le impostazioni
20
20
9
1
1
2
2
3
3
4
4
12 5
5
6 7
9
10
10
11
11 Blink
1. L'orario predefinito è 12:00 AM2. L'allarme predefinito è le 7:00 AM
1. Premere il pulsante "TIME SET" per impostare l'ora, premere il pulsante "SET-" o "SET+" per impostare l'ora.
2. Premere il pulsante "TIME SET" per confermare l'impostazione dell'ora e inserire l'impostazione dei minuti. 3. Premere il pulsante "SET-" o "SET+" per impostare i minuti.
Nota:
1. Premere a lungo il pulsante "SET-" o "SET+ " per una rapida regolazione.2. Se selezioni il formato di visualizzazione dell'ora in modalità 12H, l'indicatore "PM" apparirà nel pomeriggio, l'indicatore "AM" apparirà al mattino.3. Se selezioni il formato di visualizzazione dell'ora 12H, assicurati di scegliere l'impostazione corretta, AM/PM.
Se selezioni il formato di visualizzazione dell'ora 12H, assicurati di scegliere l'impostazione corretta, AM/PM.
Nota:
Nota:
Quando selezioni il suono della sveglia, se non ci sono altre operazioni, il suono della sveglia durerà per 10 secondi e poi uscirà dall'impostazione della sveglia.
1. Premere il pulsante "VOL+" o "VOL-" per regolare il volume dell'allarme, 5-30 livelli sono regolabili.2. Premere a lungo il pulsante "VOL+" o "VOL-" per una rapida regolazione.3. Quando si regola il volume, si può ascoltare per 5 secondi per confermare se il volume è al livello preferito.
Nota:
Puoi regolare e salvare il volume della sveglia in qualsiasi modalità, tranne che in quella radio.
Nota:
Appare quando la radio è accesaRicerca automatica dei canali
Appare quando laradio è accesaBlink
52 53
PANNELLO SUPERIORE PANNELLO FRONTALE
54
INDICATORE RADIO: Luce accesa=Il suono dell'allarme è radio INDICATORE Cicalino: Luce accesa= Il suono dell'allarme è Cicalino INDICATORE PER IL SONNELLINOINDICATORE RADIO: Luce accesa=La radio è accesa INDICATORE DI DORMIRE: Luce accesa=Il timer del sonno è acceso AM INDICATORE: Luce accesa=AMPM INDICATORE: Luce accesa=PMInserisci l'adattatore in una presa domestica standard per far funzionare
l'orologio. Inserire due (2) batterie nuove "AAA" (non incluse) per preservare tutte le impostazioni in caso di interruzione di corrente. 6
7
12
55
PANNELLO POSTERIORE
FONDO PANNELLO
Regolazione del volume della sveglia
1. Tenere premuto il pulsante " SET ON/OFF" per 2 secondi per attivare/disattivare la sveglia.2. Quando la sveglia è accesa, l'indicatore corrispondente. (RADIO/BUZZER) sarà illuminato. La sveglia si spegnerà al momento dell'allarme impostato.
3. Quando la sveglia è spenta, l'indicatore corrispondente (RADIO/BUZZER) non apparirà. La sveglia non si attiverà.
Attivare/disattivare la sveglia
56
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
VOL+
VOL-VOL-
VOL+
2020-02-17YM-186F SILK
Per iniziare
Impostazione dell’ora
57
3. Premere il tasto "TIME SET" per confermare l'impostazione dei minuti e inserire l'impostazione del formato di visualizzazione dell'ora (12h/24h).
4. Premere il tasto "SET-" o "SET+ " per selezionare il formato di visualizzazione dell'ora: 24h: Ora militare 12h: Orologio a 12 ore
1. Premere il pulsante " SET ON/OFF" per entrare nell'impostazione della sveglia, premere il pulsante "SET-" o "SET+" per impostare l'ora.
3. Premere il pulsante " SET ON/OFF" per confermare l'impostazione dei minuti e inserire l'impostazione del suono della sveglia.
4.Premere il pulsante "SET-" o "SET+" per selezionare il suono della sveglia:
BUZ: Il suono di allarme è il cicalino e l'indicatore "BUZZER" si accenderà
2. Premere il pulsante " SET ON/OFF" per confermare l'impostazione dell'ora e inserire l'impostazione dei minuti. Premere il tasto "SET-" o "SET +" per impostare i minuti
1. Quando la radio si accende, premi brevemente il pulsante "SLEEP TIMER" per attivare il timer di spegnimento automatico. Apparirà l'indicatore "SLEEP" e il tempo di sonno (Il tempo di sonno predefinito è di 5 minuti con "05" sul display a LED).
Posiziona il tuo telefono nella posizione "WIRELESS CHARGER" e l'indicatore del pannello superiore si accenderà se il telefono è stato posizionato correttamente. Quando è completamente carico, la luce si spegnerà.
Porta di ricarica USB per ricaricare il tuo cellulare.
Batteria di backup
La batteria manterrà tutte le impostazioni se l'alimentazione viene interrotta. Non ci sarà alcun display e la sveglia non suonerà sotto l'alimentazione della batteria. Se non c'è la batteria e l'alimentazione non c'è, l'ALLARME/ORARIO/RADIO dovrà essere resettato.
Manutenzione del tuo orologio
Sostituire la batteria di riserva ogni anno o conservare l'orologio senza batteria quando non viene utilizzato. Per pulire l'orologio si può usare un panno morbido o un tovagliolo di carta. Non usare detergenti corrosivi o soluzioni chimiche sull'orologio. Tieni l'orologio pulito e asciutto per evitare problemi.
Supporto
Contatta [email protected]. Risponderemo alla tua email entro 24 ore.
2. Premendo di nuovo il pulsante "SLEEP TIMER" per selezionare ciclicamente 5, 30, 45, 45, 60, 75, 90, 105, 120 minuti o OFF. ("OFF" significa che il timer è disabilitato).
5. Premere il pulsante "TIME SET" per confermare e uscire dall'impostazione dell'ora.
Accendere
Indikator
Seleziona l'ora del timer
Blink
RAD58
66 67 68
59 60 61 62
1. Quando la sveglia si spegne, premi qualsiasi pulsante del pannello superiore tranne il pulsante "SNOOZE/ DIMMER" per fermare la sveglia. Suonerà il giorno dopo alla stessa ora.
2. Se non c'è un'altra operazione, la sveglia si fermerà dopo 30 minuti.
Arresto della sveglia
Ricerca manuale del canale FM1. Premere brevemente il pulsante "RADIO ON / OFF / SCAN (pressione lunga)" per accendere la radio. 2. Tenere premuto il pulsante "SET-/SET+ " per 2 secondi per cercare il canale, quando viene trovata una stazione radio, interrompere la ricerca e riprodurre il canale cercato.
Memoria radioLa radiosveglia può salvare fino a 99 stazioni radio, consentendo un accesso rapido.1. Tenere premuto il pulsante "SLEEP TIMER" per 2 secondi fino a quando "P01" non lampeggia. Premi di nuovo il pulsante "SLEEP TIMER" per memorizzare la Stazione 1.
Riprodurre le stazioni pre-memorizzateIn modalità radio, premere brevemente una volta il pulsante SET-/SET+" per selezionare la stazione radio dalla lista.Regolazione del volume della radio
1. Premere il pulsante "VOL+ " o "VOL-" per regolare il volume della radio, i livelli 0-30 sono regolabili.2. Premere a lungo il pulsante "VOL+ " o "VOL-" per una rapida regolazione.
2. Cerca la seconda stazione desiderata, premi a lungo il pulsante "SLEEP TIMER" finché "P01" non lampeggia. Poi, premi il pulsante "SET+ ", quando appare "P02" e lampeggia, premi ancora una volta il pulsante "SLEEP TIMER" per memorizzare la Stazione 2.
3. Ripetere la procedura sopra descritta per memorizzare altre stazioni radio.
Ricerca automatica del canale FM1. Tenere premuto il pulsante "RADIO ON / OFF / SCAN (pressione lunga)" per 2 secondi per accendere la radio. 2. Inizierà automaticamente la ricerca delle stazioni radio da 87.5MHz a 108MHz. I canali radio ricercati saranno memorizzati automaticamente; si possono memorizzare fino a 99 canali.
63 64 65
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
BUZ
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
1. Video didattico ....................................................................2. Caratteristiche .........................................................................3. Per iniziare ..............................................................................4. Vista del prodotto........................................................................5. Impostazione dell'ora.........................................................................6. Impostazione sveglia ............................................................... 1) Regolazione del volume della sveglia ............................................. 2) Attivare/disattivare la sveglia ......................................................... 3) Arresto della sveglia ....................................................................7. SNOOZE ................................................................................8. Radio FM ............................................................................... 1) Impostare l'antenna FM...................................................................
2) Ricerca automatica del canale FM ............................................... 3) Ricerca manuale del canale FM ................................................... 4) Memoria radio ............................................................................... 5) Riproduci le stazioni pre-memorizzate ........................................... 6) Regolazione del volume della radio ............................................... 7) Spegnimento automatico del timer ................................................9. Usare il Dimmer ......................................................................10. Ricarica senza fili...................................................................11. Porta di ricarica del telefono USB .........................................12. Backup della batteria .............................................................13. Manutenzione del tuo orologio..............................................14. Supporto ...............................................................................
525353545759626262636363646465656566666768686868
FM Antenna
ACR-WYM-186
L'indicatore della suoneria corrispondente si accenderà up
RAD: Il suono dell'allarme è la radio e l'indicatore "RADIO" si accenderà
Nota:Il suono predefinito della sveglia è la radio, 87.5MHz. Se scegli la radio come suono di allarme, l'ultimo canale che ascolterai sarà la suoneria.
SNOOZE
Quando la sveglia si spegne, puoi premere il pulsante "SNOOZE/DIMMER"per appisolarti un po'. Dopo 9 minuti, la sveglia si spegnerà di nuovo.1. La sveglia può suonare per 6 volte. Dopo il settimo sonnellino, la sveglia si spegne.2. Se non si fa nulla quando la sveglia si spegne, la sveglia si spegne dopo 30 minuti.
Caratteristica della radio FM
Configurare l'antenna FMEstendere completamente l'antenna a filo FM e variare la direzione per la migliore ricezione FM.
Usare il regolatore
Premere il pulsante "SNOOZE/DIMMER" per impostare la luminosità del display su Bright/30% Dim/50%Dim/75% Dim/90% Dim/OFF.
Nota:Quando la sveglia viene attivata, questo pulsante svolge il ruolo di "snooze"invece di "dimmer". Made in China
ItaliaOttieni supporto tramite [email protected]