ALAMIREW M.

27
ALAMIREW M.

description

HIGHWAY GEOMETRIC DESIGN. ALAMIREW M. Lecture overview. INTRODUCTION Design controls and criteria: Functional classification systems of highways Design speed & Design vehicle Vehicle and driver characteristics Highway cross‐section elements : - PowerPoint PPT Presentation

Transcript of ALAMIREW M.

Page 1: ALAMIREW M.

ALAMIREW M.

Page 2: ALAMIREW M.

INTRODUCTIONDesign controls and criteria:

Functional classification systems of highways Design speed & Design vehicle Vehicle and driver characteristics

Highway cross section elements‐ : Lane and shoulders, sidewalks, medians, and pedestrian crossings

Elements of geometric design: Horizontal alignment, Transition and super elevation, ‐ Vertical alignment, Sight distance

Lecture overview

Page 3: ALAMIREW M.

Introduction • Highway geometric design involves the design of

geometric elements of a highway and fixation of standards with respect to various components

• Its dictated within economic limitations to satisfy the requirements of traffic in designing elements such as:

Cross-section Horizontal alignment Vertical alignment Sight distances Lateral and vertical clearances

etc.

Page 4: ALAMIREW M.

Introduction Cont… The safety, efficiency, and economic operation of a highway is

governed to a large extent by the care with which the geometric design is worked out

The engineer has to consider the following points when selecting design standards :

.Volume and composition of traffic in the design period Faulty geometries are costly to rectify at a later date The design should be consistent and the standards used The design should embrace all aspects of design including

signs, markings, lighting, etc. Design should enhance rather than degrade the environment The design should minimize the total transportation cost .Safety should be built in the design The design should be enable all road users to use the facility

Page 5: ALAMIREW M.

•Design Controls and Criteria Functional classification Projected traffic volumes and

composition Design speed and design vehicle Topography Available Funding Driver performance factors Safety Politics Social and environmental impacts Right‐of‐Way (ROW) Costs

Page 6: ALAMIREW M.
Page 7: ALAMIREW M.
Page 8: ALAMIREW M.
Page 9: ALAMIREW M.

.I. Trunk Roads (Class I) Centers of international importance and roads terminating at international boundaries are linked with Addis Ababa by trunk roads. They are numbered with an "A“ prefix: an example is the Addis-Gondar Road (A3). Trunk roads have a present AADT ≥1000.II. Link Roads (Class II) Centers of national or international importance, such as principal towns and urban centers, must be linked between each other by link roads. A typical link road has over 400 - 1000 first year AADT. They are numbered with a "B" prefix. An example of a typical link road is the Woldiya- Debre Tabor- Woreta Road (B22), which links, for instance, Woldiya on Road A2 with Bahir Dar of Road A3.

Page 10: ALAMIREW M.

III. Main Access Roads (Class III)• Centers of provincial importance must be linked between each

other by main access roads. First year AADTs are between 30-1,000. They are numbered with a "C“ prefix.

IV. Collector Roads (Class IV)• Roads linking locally important centers to each other, to a more

important center, or to higher class roads must be linked by a collector road. First year AADTs are between 25-400. They are numbered with a "D" prefix.

V. Feeder Roads (Class V)• Any road link to a minor center such as market and local locations

is served by a feeder road. First year AADTs are between 0-100. They are numbered with an "E" prefix.

Page 11: ALAMIREW M.
Page 12: ALAMIREW M.
Page 13: ALAMIREW M.
Page 14: ALAMIREW M.
Page 15: ALAMIREW M.

FLAT TERRAIN: TRANSVERSE TERRAIN SLOPE<5%

ROLLING TERRAIN:TRANSVERSE TERRAIN SLOPE FROM 5% TO 25%

Page 16: ALAMIREW M.

MOUNTANOUS TERRAIN:TRANSVERSE TERRAIN SLOPE FROM 25% TO 50%

ESCARPEMENT TERRAIN:TRANSVERSE TERRAIN SLOPE >50%

Page 17: ALAMIREW M.
Page 18: ALAMIREW M.
Page 19: ALAMIREW M.
Page 20: ALAMIREW M.
Page 21: ALAMIREW M.
Page 22: ALAMIREW M.
Page 23: ALAMIREW M.
Page 24: ALAMIREW M.
Page 25: ALAMIREW M.
Page 26: ALAMIREW M.

ERA

Page 27: ALAMIREW M.