Safe communication between remote locations with modular system HImatrix F
AKUINO Modular Electronic Systems for Remote Measure and Control
-
Upload
destin-informatique -
Category
Environment
-
view
120 -
download
2
Transcript of AKUINO Modular Electronic Systems for Remote Measure and Control
Modular Electronic Systemfor Remote Measure & Control
Denis Alaime – [email protected] Dupriez – [email protected]
Faubourg Saint Martin 22B-5570 Beauraing
@AkuinoNET
2
Automated Managementusing REMOTE Modular Electronic System
& WIRELESS Communication :
● Locally : Low Power MESH Network
Redundant paths for radio waves
● Toward Web Servers : GSM (GPRS or SMS)or wired Internet when available
Redundant GSM networks
● Redundant Web Servers to store data and alert managers.
X
3
Designers of Automatic Systems serving Systems Designers
EthaConcept : Modular Electronic Systems
Destin : Software Applications Development
● Near from you to design and produce solutions adapted to your design needs;
● Integrated System to:
– collect all the data from diverse sources (including existing systems),
– send data needed by other systems,
– control local processes ;
● Modular hardware adaptable to new needs(new sensors, new communication interfaces, new protections, new actuators)
● Software open to external collaborations, customers long term security...
4
Our Business Development
● Horizontal:To develop complete applications (or parts) including hardware, software, telecommunications, Web servers, etc.in order to answer the requests of Partners developing their specific market. Examples :
– Construction Site Time Clock
– Disinfection monitoring for white rooms
– Livestock breeding
● Vertical:To develop ourselves one specific market like monitoring for rivers and storm basins
5
We sell or rent...● Application to configure, to collect field data and to control using settings
sent by radio.
● Applications to analyse and publish information to users (managers, general public, …). Transactions like reservations of equipments.
● AKUINO Electronic Modules with:
– sensors to collect data,
– a microcontroller powerful enough to measure data and check them against the settings,
– relays and other outputs to enforce settings,– a local memory in case of communication breakdown,– a local area network (MESH) to ensure redundancy of communications,– a network connected to the Internet (GSM, wired Ethernet, etc.),
– protection against power outages (LiPO).
6
Services● Listening customer needs and proposal for different alternative solutions
● Design around the chosen solution;Study of the technical and commercial parameters to produce the solution
● Production of ready to install electronic modules with the necessary cases
● Development of the necessary software(within the microcontroller or the Web server)
● Installation and users training
● Support and maintenance;Hardware or software updates to follow the evolution of the needs and the technology.
7
Akuino Module ● Microchip® PIC32 microcontroller
(128k RAM, 512k Flash, up to 80MHz)
● Power: USB (5v), Battery/Solar panel(12v), LiPO
● Programmed using ICSP or USB(Bootloader chipKIT.net)
● Integrated Development Environment: UECIDE.org(project started by Majenko Technologies)
● Libraries derived from Arduino
● 2 serial data sockets compatibles with Digi.com XBee®
(onboard status LEDs)
● Serial jack (RX/TX/Gnd) FTDI® compatible
● I2C bus
● Digital & analog I/Os
● 2 x 4 / 20ma analog inputs
● USB Host possible
9
Digi.com XBee: a truly complete serial interface
All necessary signals :
● Complete RS-232
● Connection status
● Energy Management
● Reset
● RX/TX for debugging (Future GPS using Simcom® SIM 908)
● Robust Power for Simcom® SIM 900 / 908
● Wifi supported
Akuino XBee: 1: Vcc (3.3V) 2: RXD (DOUT) 3: TXD (DIN) 5: Master RESET 6: RSSI (LED) 9: DTR (Sleep Request) 10: GND 11: Debug RXD (TX) 12: CTS 13: XBee awake 15: ASSOC (LED) 16: RTS 17: RI 18: Debug TXD (RX) 19: Akuino Optional 5V 20: Commissioning
11
GSM / GPRS module with a Digi.com XBee® socket
● Based on Simcom SIM900®
(Future module with GPS+GSM using SIM 908®)
● UFL Connector
● Very robust power
● Sleep Managementand « Power Key »
● Long life batteryfor the RTC clock
● ESD protectionfor the SIM card
● Debug RX/TX
12
Module with two USB Host ports
● Based on Vinculum II from FTDI®
● Very complete programming environment (IDE)
● Digi.com XBee® socket
● Delivered with a firmware supporting two USB Host HID devices.Other examples at FTDI® :http://www.ftdichip.com/Firmware/Precompiled.htm
● Numerous digital I/Os available
● Very complete serial interface
13
Other modules made for Digi.com XBee sockets
● Adaptation board for Digi.com XBeesusing castellated format
● RS-232 or RS-485 module
● Bluetooth module
● Ethernet module
14
Time Clock for IDM Data system
● Reads ConstruBadge using barcode or RFID(pairing possible on site)
● Reads LIMOSA codes
● LED and Buzzer to confirm readings
● Powered by a batteryor the electrical grid
15
Within theconstruction sitetime clock :
Akuino,SIM900,Vinculum II,RFID Reader,QR Code Reader,Battery,LEDs, Buzzer...
16
Braine l'Alleud : storm basin monitoring
- Water level monitoring- SMS alerts
● Paratronic Radarconnected using 4/20 ma
● Big choice of industrial sensors based on 4/20 ma interface
Pleased to serve your projects !
Denis Alaime – [email protected] Dupriez – [email protected]
Faubourg Saint Martin 22B-5570 Beauraing
18
Companies mentioned
● IDM Data: http://www.wimesh.be/idm/idm.html
● Arduino.cc
● ChipKIT.net
● Digi.com
● LinkSprite.com
● FTDIchip.com
● Majenko Technologies: majenko.co.uk
● Microchip.com
● Paratronic.fr
● Sim.com