AirStrip OB iPhone Quick Start Guide 1010

Copyright 2009

Prepared for:

AirStrip Technologies

AirStrip OB iPhone Quick Start Guide

Prepared on: April 27, 2010


iPhone Quick Start GuideVersion 1.0 Revision: 6

ContentsIntroduction ........................................................................................................................ 3 Purpose ......................................................................................................................... 3 Organization .................................................................................................................. 3 Revision History ............................................................................................................ 3 iPhone Installation and Configuration Steps ...................................................................... 4 Installation Steps........................................................................................................... 4 Configuration Steps....................................................................................................... 4 iPhone Launch Steps and Features ..................................................................................... 8 Launch Steps ................................................................................................................. 8 Application Features ................................................................................................... 11

Patient Census ......................................................................................................................... 11 Patient Summary ..................................................................................................................... 12 Patient Strip Chart ................................................................................................................... 13

Doc 1.0 Rev 006

Page 2


IntroductionPurposeThis document describes the installation steps for the AirStrip OB Client onto the iPhone.

OrganizationThis document is organized into 3 sections for which a description is captured below: Introduction Provides a description of the purpose of this document and how the document is organized iPhone Installation and Configuration Steps Provides a description of the steps to install the AirStrip OB Client and configure it for use with the HCA tokenless environment iPhone Launch Steps and Features Provides the steps that must be followed to launch the application and the basic features of the AirStrip OB Client

Revision HistoryRev No. 0 Description Initial version of AirStrip Technologies AirStrip OB iPhone Quick Start Guide Updated to reflect Version 1.5 of the iPhone Added screenshots of the application Added additional screenshots and explanations Updated to included the registration on the AirStrip website Updated Application Features to include fetal strip colors and device minimum requirements Updated the dilatation dots on the census page Date January 20, 2009 Changes Marked N/A

1 2 3 4 5

March 24, 2009 April 20, 2009 October 13, 2009 December 11, 2009 April 26, 2010

N N N N N

6

October 14, 2010

N

Doc 1.0 Rev 006

Page 3


iPhone Installation and Configuration StepsIn order to install the AirStrip OB Client onto the iPhone, the user must have an iTunes account and an operating system of 2.2.1 or higher. The AirStrip OB client is available for download through the Apple App Store on iTunes. The steps below should be followed to install and configure the application onto the users device.

Installation StepsThe following steps should be executed to install the AirStrip OB client onto the iPhone: 1) Complete the device registration on the Airstrip Website. Device registration is located at the top left of the page. www.airstriptech.com 2) Launch the App Store by tapping the App Store icon from the Launcher on the iPhone. 3) Search for AirStrip OB within the App Store. 4) Select the AirStrip OB application. 5) Select to install the AirStrip OB application 6) Enter your iTunes account password to begin the download 7) Once the download completes, the AirStrip OB icon will be present on the launcher 8) Tap the AirStrip OB icon to launch the application.

Configuration StepsThe following steps should be executed to configure the AirStrip OB client on the iPhone: 1) Tap the AirStrip OB icon to launch the application.

Doc 1.0 Rev 006

Page 4


2) Select Register from the Welcome screen.

3) Accept the License agreement.

Doc 1.0 Rev 006

Page 5


4) Complete the registration information and submit.

5) Following registration, you will need to contact AirStrip Technical Support @ 1-877-258-5869 to have the device registration added in the AirStrip Database. 6) Once the database has been updated, select the Options button on the AirStrip OB home page.

Doc 1.0 Rev 006

Page 6


7) From the Options screen, select Update My Sites.

8) Select Update Sites at the confirmation popup.

9) After your sites have been updated you should see your Hospital listed under Sites. 10) Select the Home Button at the top left of the screen to return to the AirStrip OB Home screen. 11) Select your site and log in using your OBLink account credentials.Doc 1.0 Rev 006

Page 7


iPhone Launch Steps and FeaturesThe steps below should be followed to launch the AirStrip OB application.

Launch StepsThe following steps should be executed to install the AirStrip OB client onto the iPhone: 1) Tap the AirStrip OB icon to launch the application.

2) Select the site to which you want to logon.

Doc 1.0 Rev 006

Page 8


3) Enter your AD account or OBLink user name and password into the logon fields and tap Go.

4) The Patient Census screen will then display.

Doc 1.0 Rev 006

Page 9


5) Tap a patient and the Patient Summary screen will display.

6) Tap the Fetal Strip button and the patients strip chart will display.

7) 8) 9) 10)

Tap the Summary button to return to the Patient Summary Screen. Tap the Patients button to return to the Patient Census. Tap the Home button to return to the Home screen. Press the iPhone Home button to close the application.Page 10

Doc 1.0 Rev 006


Application FeaturesThe following features are available on the AirStrip OB iPhone client: Patient Census The Patient Census lists the patients in Labor Delivery and provides the ability for the user to select a patient to view additional patient data including the patients strip chart. The unit information is in blue and patients in that unit are listed beneath it in alphabetical order by last name. By tapping the Fetal Strip Button to the right of each patient, you will be taken directly to the patients fetal strip. Please see the Figure below for more details. Beside each patient is a dot that represents the dilation of that patient. Details on the color coding of each dot are captured below. White Dots: Grey Dots: Yellow Dots: Red Dots: Are patients that have not been documented or who have delivered Are patients that are 1-4 centimeters dilated. Are patients that are 5-7 centimeters dilated. Are patients that are 8-10 centimeters dilated.

Unit Information Not documented or is delivered. 1-4 Cm

Fetal Strip Button

8-10 Cm Unit Information

Doc 1.0 Rev 006

Page 11


Patient Summary The Patient Summary screen lists available patient data including such information as the patients vital signs and delivery progress information. The header at the top of the screen displays the patient name, hospital name, unit and bed number. Under the header, the patients name is displayed again long with other information. The first line displays the membrane status. The second line displays the Estimated Date of Conception (EDC) on the left followed by the patients Gravida and Para, and then the patients last exam. On the third line, the name of the doctor and then the name of the nurse are displayed. Below the patient information is a blue Fetal Strip button that allows the user to launch the patients strip chart by tapping it. Below the Fetal Strip button, the historical patient data is displayed through a series of tabs. You can tap the exams, vitals, notes and the other buttons captured in the tabs. Please note that these will vary based on what patient data your site has available. Each button drops down a menu of nursing documented items. When more information is available yellow arrows will be in the right hand side of the field. If you tap the arrow it will take you to more detailed information. To get back to your list of patients tap the Patients button in the upper left hand corner. Please see the figure below for more details. The only items that are directly interfaced into the Airstrip OB application are the patients blood pressures and the fetal strips. All other information is documented by the nursing staff. If there is an item that is missing from Airstrip OB it was not documented at the time of review

Patients button

Membrane Status Gs and Ps Last Exam Fetal Strip button Doctors Name Data Tabs Nurses Name

EDC

Doc 1.0 Rev 006

Page 12


Patient Strip Chart The Patient Strip Chart screen captures the last four hours of the patients strip chart and provides the user with the ability to scroll through the strip chart. The user has the ability to scroll backwards and forwards through the strip chart data, as well as leaving the strip chart scrolling in real-time mode. The fetal strip appears in real time mode and will continue to update. The header at the top of the screen displays the patient name, hospital name, unit and bed number. You can use the your finger by swiping left or right to scroll the strip chart or you can use the toggle buttons in the bottom left hand corner. Tapping the Real-time button will take the strip back to real-time mode. If you need to see more of the strip chart, the strip chart may also be changed to landscape by rotating the iPhone 90 degrees to the right or left. In this view your finger will have to be used to scroll through the strip chart data. To return from the fetal strip rotate your phone to the upright position and in the top left corner tap the Patients or Summary button to go back to the Summary screen or the Patient Census. Please see the figure below for more details.

Patients button

Toggle buttons

Baby1HR = Color.Orange Baby2HR = Color.Yellow Baby3HR = Color.Purple UA = Color.White MHR = Color.White SPO2 = Color.LightBlue

Real-time button

Toggle buttonsDoc 1.0 Rev 006

Page 13

AirStrip OB iPhone Quick Start Guide 1010

Documents

Transcript of AirStrip OB iPhone Quick Start Guide 1010