ASEAN’S Code of Conduct in the South China Sea: A Litmus ...
Air Sea BioPack-1 - Home | Air Sea Containers · 521 Cavendish Street AIR SEA CONTAINERS LTD....
Transcript of Air Sea BioPack-1 - Home | Air Sea Containers · 521 Cavendish Street AIR SEA CONTAINERS LTD....
Packaging supplied by:
AIR SEA CONTAINERS LIMITEDun
INFECTIOUSSUBSTANCEIN CASE OF DAMAGE OR LEAKAGEIMMEDIATELY NOTIFYPUBLIC HEALTHAUTHORITY
6
BioPack-1TM
Air Sea
AIR SEA BIOPACK-1™ - FOR INFECTIOUS SUBSTANCES
AIR SEA CONTAINERS LTD.
521 Cavendish Street
Birkenhead, CH41 8FZ
Great Britain
Tel: +44 (0) 151 653 1500
Fax: +44 (0) 151 653 1515
Web site: www.airseadg.com
E-mail: [email protected]
SUITABLE FOR ALL INFECTIOUS SUBSTANCES
UNDER CLASS 6.2
ASSEMBLY DETAILS:BIOMEDICAL PACKAGINGSFOR INFECTIOUS SUBSTANCES
SYSTEM A
CODE:332
GB/2450
SUITABLE FOR ALL
INFECTIOUS SUBSTANCESUNDER CLASS 6.2
PRIMARY RECEPTACLES
ARE PACKED IN
BUBBLE WRAP
BOX Dimensions:
100 x 100 x 225mm
CONTAINER Dimensions:
68 x 175mm
NOTES:
The Polypropylene BioTube
330™ and its closures are fully
autoclavable, withstands95kPa and can be madeTamper-Evident with the useof paper seals.
This Combination Packaging
may be temperature controlled
in a variety of Air Sea Thermal
Control Units .
Approved with a range of
Primary Receptacles up to 56ml
see over for details.
INDICATION OF
PROPORTION
Air Sea
BioPack-1™
4G/CLASS 6.2/**GB/2450
Bung Key
(CODE 180)
Typical Primary
Receptacles
(MUST BE Sealed with,Polyester Tape)
Typical
Bubble Pouch
(CODE 510)
Bubble Wrap
for extra protection
Double wall corrugatedFibreboard SHIELD
Flaps
Affix
appropriate
Hazard Label
E.P.E. foam
closure protection
PAD
Polypropylene Closure
With EPDM Seal
Optional interior
fitments for the
BioTUBE330™
include
Specimen Holders,
Absorbent Pads &
Bubble Pouches.
BioTUBE330™
(CODE 330)
330ml. Secondary Packaging.Alternative 50ml. BioTUBE50™
(CODE 111) Secondary
Packaging is available -
up to 4 of which will fit in
this CODE 331 box
FibreboardOuter Packaging
(CODE 331)
Reusable,includes Box, Shield,
Hazard Label andInstructions in
four languages.
U.N. Mark
41
2
3
** Denotes year of manufacture
over top of box. 'U' shape tape in
clear self adhesive50mmtape, seal with
remove double sidedFold flaps in order and
**
PRIMARY RECEPTACLES - APPROVED DESIGN TYPES
SPECIFICATION SHEET
BIOMEDICAL
PACKAGINGS
SUITABLE FOR
INFECTIOUS SUBSTANCES
UNDER CLASS 6.2
PRIMARY RECEPTACLES
MUST BE WRAPPED IN
BUBBLE PACK AND HAVE
ABSORBENT MATERIALS
NOTES:
The Primary Receptaclesshown here are approved foruse in Air Sea Secondary andCombination Packagings.
Further details on Request.
A: Glass 5ml
2.25 x 5.25
Tinplate
Screw Cap
C: Glass 8ml
1.5 x 10.5
Rubber Bung
(Hypodermic)
B: Glass 5ml
2.25 x 5.25
Tinplate and
Rubber Seal
(Hypodermic)
E: Glass 15ml
3.5 x 5.5
Rubber Bung
(Hypodermic)
D: Glass 10ml
1.5 x 10.0
Plastic Screw
Cap / Rubber .
(Hypodermic)
F: Glass 15ml
2.5 x 6.75
Rubber Bung
(Hypodermic)
G: PYREX 25ml
3.25 x 7.0
Plastic
Screw Cap
H: Glass 30ml
3.5 x 6.5
Rubber Bung
(Hypodermic)
I: Glass 30ml
2.5 x 8.5
Tinplate
Screw Cap
J: Glass 30ml.
2.75 x 9.25
Tinplate
Screw Cap
M: Plastic 0.5ml
1.25 x 5.0
Plastic Screw
Cap
K: PYREX 50ml
4.0 x 9.0
Plastic Screw
Cap
N: Plastic 1ml
1.0 x 5.0
Plastic Push-on
Cap
O: Plastic 2ml
1.0 x 5.0
Plastic Snap-on
Cap
L: Glass 50ml
3.5 x 9.5
Plastic Screw
Cap
P: Plastic 5ml
1.75 x 5.0
Plastic Screw-on
Cap
Q: Plastic 5ml
2.0 x 6.0
Plastic
Screw-on
Cap
R: Plastic 4ml
1.5 x 8.25
Plastic and
Rubber
Push-on Cap
S: Plastic 8.5ml
2.0 x 10.0
Plastic
Screw-on
Cap
T: Plastic 8.5ml
2.0 x 10.75
Plastic
Screw-on
Cap
U: Plastic 8.5ml
1.5 x 10.5
Rubber Bung
V: Plastic 8.5ml
1.5 x 11.5
Plastic Screw-on
Cap
W: Plastic
50ml
3.5 x 5.5
Plastic
Screw-on
Cap
X: Plastic 50ml
4.25 x 6.25
Plastic
Screw-on
Cap
Y: Plastic 50ml
3.5 x 13.5
BioTube50™
Plastic
TriSure Bung
Z: Aluminium
50ml 3.0 x 11.5
Screw-on Cap
g.comE-mail: uk@airsead
g.comWeb site: www.airsead
Fax: +44 (0) 151 653 1515
Tel: +44 (0) 151 653 1500
Great Britain
Birkenhead, CH41 8FZ
521 Cavendish Street
AIR SEA CONTAINERS LTD.
Packaging and capacities are:
Code 111 Biopack 1 - 40ml
Code 332 Biopack 1 - 56ml
Code 333
Biotransporter 1 - 224ml
Code 500 Biopack 2 - 72ml
The approved Combination