7/29/2019 AIA11G_LabGuide0_StudentSetup

1/6

Student Setup

Page: 1

AIA Foundation Pack 11gR1 Workshop

Student Setup

Hands-On Guide

7/29/2019 AIA11G_LabGuide0_StudentSetup

2/6

Student Setup

Page: 2

Change Record

Date Editor Version Change Reference

8/9/2010 J ohn Hung 2.0 Zip jDeveloper

8/12/2010 J ohn Hung 2.1 subst

8/12/2010 J ohn Hung 2.2 Remove UserConfig section

9/24/2010 J ohn Hung 2.3 Host ->hosts

COPYRIGHT & TRADEMARKS

Copyright 2010, Oracle. All rights reserved

The information contained in this document is subject to change without notice. If you find any problems in thedocumentation, please report them to us in writing. This document is not warranted to be error-free. Except asmay be expressly permitted in your license agreement for these Programs, no part of these Programs may bereproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.

If this documentation is delivered to the United States Government or anyone using the documentation onbehalf of the United States Government, the following notice is applicable:U.S. GOVERNMENT RIGHTS The U.S. Governments rights to use, modify, reproduce, release, perform,display, or disclose these training materials are restricted by the terms of the applicable Oracle licenseagreement and/or the applicable U.S. Government contract.Oracle, J D Edwards, PeopleSoft, and Siebel are registered trademarks of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective owners.

7/29/2019 AIA11G_LabGuide0_StudentSetup

3/6

Student Setup

Page: 3

Contents1 Introduction ............................................................................................................................................................ 42 Add Server Addresses to your HOSTS file ............................................................................................................ 43 Install Pre-Configured jDeveloper for the Workshop ............................................................................................. 5

3.1 Install jDeveloper ............................................................................................................................................. 53.2 Start jDeveloper ............................................................................................................................................... 6

7/29/2019 AIA11G_LabGuide0_StudentSetup

4/6

Student Setup

Page: 4

1 IntroductionWelcome!! These instructions will help you setup your jDeveloper environment to connect to the AIA Foundation Packserver.

You will need to perform the following on your laptop: Add Server Addresses to your HOSTS file to access the AIA Foundation Pack and E-Business Suite servers Install pre-configured jDeveloper 11.1.1.2 for the workshop which contains

o Oracle SOA Composite Editor Extensiono AIA Service Constructor Extensiono Configuration (Application Server Connection/MDS Connection/Lifecycle Connection)o Workshop Application Workspace

2 Add Server Addresses to your HOSTS fi leTo access AIA Foundation Pack and E-Business Suite servers, we need to add entry to your laptop hosts file

1. Open theC:/windows/system32/drivers/etc/hosts file in Notepad.

Note: The file may be hidden when navigating via Windows Explorer.

2. Add the following line in the file. Replacing XXX.XXX.XXX with the actual IP address that the instructor will provideyou.

XXX.XXX.XXX.XXX aia11g.localXXX.XXX.XXX.XXX ebs121-vm.us.oracle.com

3. Save the hosts file

4. Open your web browser and turn off your Web Browser Proxy

5. In the web browser, test connectivity with the following URL:

AIA Conso lehttp://aia11g.local:8001/AIA/faces/aiaHomeLogin.jspxLogin: weblogic/welcome1

Enterprise Managerhttp://aia11g.local:7001/emLogin: weblogic/welcome1

E-Business Suite

http://ebs121-vm.us.oracle.com:8000/OA_HTML/AppsLoginClick: Apps Login Links ->E-Business Home PageLogin/Passwd: operations/welcome

7/29/2019 AIA11G_LabGuide0_StudentSetup

5/6

Student Setup

Page: 5

3 Install Pre-Configured jDeveloper for theWorkshop

You will need 3gb of disk space to install jDeveloper.

3.1 Install jDeveloperThe Instructor will provide a pre-configured jDeveloper for the workshop which includes the SOA and AIA extensionsinstalled.

1. Unzip aiawshop-jdev.zip to a SHORT PATHwith NO BLANK SPACES

For example: c:\oracle as shown in the below screenshot

2. Open the/jdev11g-wshop/mapTdrive.batfile in Notepad

3. Update the UNZIP_DIRvariable value with the path that you unzip aiawshop-jdev.zip

4. Save and Close the mapTdrive.batfile

5. Double click the mapTdrive.batfile to map the local folder to T Drive which will be created.

7/29/2019 AIA11G_LabGuide0_StudentSetup

6/6

Student Setup

Page: 6

6. In Windows Explorer, you should see the newly created T drive which is pointing to you unzip folder

3.2 Start jDeveloper

Lets start jDeveloper now.

1. In Windows Explorer, navigate toT:\jdev11g-wshop and double click the start-jdeveloper.batto start jDeveloper.

2. If you are prompted for Configure File Type Association, checkmark all and click OK

3. When jDeveloper window opens you will see the Lab Application Workspace, and the pre-defined connections.