AgileSwitch Switch Driver Requirements For IGBT Drivers
-
Upload
agileswitch -
Category
Technology
-
view
334 -
download
4
description
Transcript of AgileSwitch Switch Driver Requirements For IGBT Drivers
AgileSwitch Switch Driver Requirements
Plug and Play IGBT Drivers. Perfectly Matched For Fuji Switches.
• Complete as much of this form as you can, however items with an asterisk* are required
• Send to AgileSwitch by email [email protected] or fax 866-788-7794. A sales representative will contact you within 24 hours, however feel free to call us any time at 484-483-3256.
Parameter Value Value Examples
Date July 11, 2011
Company Name SolarTech Systems
Company Location Vail, CO USA
Contact Name Carol Smith
Contact email and phone [email protected] 970-555-1234
IGBT Specifications
IGBT Manufacturer*
Fuji (FE)
IGBT Model Number*
2MBI225VN-120-50
Key Driver Requirements
Operating Frequency (Khz)*
10Khz
Parallel? If so, how many IGBTs are being driven? (2 or 3?)*
No or Yes, If yes, then two or three
Post Header Connector*
14, 20 pin, Fiber
Supplemental Requirements
Flying Lead No
Isolation preference Transformer, Opto-Isolator
Temperature Range (C)
-20 to +85 C
Fault Signal Types IGBT temp, Ambient temp, Overshoot voltage
Fault Lockout Control No or Yes
RoHS required? Yes
Special Requirements Additional specifications /requirements
Application Related
End use Application Solar inverter
Stage of Application In development, building prototypes
Quantities – initial (#) 16
Initial timing (Weeks) 4-6 weeks
Quantities – production (#)
1,000 per year
Production Start Timing
9 months
Alternatives Will produce on own.
Other Comments Would like driver/IGBT as subassembly
• For more information, do visit our website at http://www.AgileSwitch.com