Afripanel designs , manufactures and installs modular ... · Afripanel designs , manufactures and...
Transcript of Afripanel designs , manufactures and installs modular ... · Afripanel designs , manufactures and...
Afripanel designs , manufactures and installs modular buildings. We specialize in turnkey solutions. Our
product and solutions are tailored for quick and efficient construction and aesthetically good looking
buildings. All buildings are energy efficient, supplied in a kit form and mostly flat packed. Our product is
ideal for mining camps, schools, clinics, offices, accommodation units and for the low cost housing
sector. All buildings are pre-manufactured at our factory in Kempton Park, Gauteng, South Africa. We
guarantee a quality building for any of your requirements.
1
Tel : +27 11 979-1885
Below are the different types of roof designs
2. Monoslope roof
1
Tel : +27 11 979-1885
Our main feature on our modern building system is that the roof has no truss, just a IBR insulated
panel roof with beams or common walls to create the double pitch, thereby creating more volume
inside the building. The chromadek cobble pattern is a nice touch to give the structure a modern look.
1. Pitch Roof
2
Tel : +27 11 979-1885
The main feature of the Traditional style housing system is the lightweight roof truss. This type of
building system can be used for very large building structure, taking into consideration the combined
strength of common walls, the insulated ceiling and wall panels with the truss. This style is a very
effective insulated structure but takes longer than the monoslope style to install, due to the truss
system.
The roof slope is a standard 7 deg. This building style is commonly used for smaller buildings but can
still be utilized on larger structures. The IBR roof panel is structurally much stronger than a standard
IBR sheet and can span up to 6m un supported. The actual roof panel is the ceiling and the best part is
that it is insulated, energy efficient and you save time on installation.
3. Hip roof Design
3
Tel : +2711 979-1885
B. IBR Wide span panel is used for our monoslope and modern style building method and for
large open structures like churches or Canteens. The IBR wide span panel is corrugated on
one side with chromadek AZ150 steel bonded on expanded polystyrene with a smooth or fluted
chromadek AZ150 finish as a ceiling.
PRODUCT SPECIFICATION
1. Insulated Panels
A. Fluted and flat Panels are used for wall construction. All panels are tongue and groove.
Our panels are made of 0.5mm thick chromadek AZ150 steel sheeting with Expanded
polystyrene insulation. Generally a 75mm wall panel is used, other size thickness are
available depending on the requirement of certain applications. Our fluted panel is 20%
stronger than our flat panels.
Tel : 011 979-1885
INSULATED HINGED DOORWood-grain Chromadek Both Sides.Powder Coated Aluminum40MM EPS
CHROMADEKEAVES CAPPING
CHROMADEKRIDGE CAPPING
CHROMADEKGABLE CAPPING
ALUMINUM POWDER-COATED FLASHING
CHROMADEKZ SECTION
ALUMINUM POWDER-COATED CORNERPOST
ALUMINUM POWDER-COATED 7 DEGREE T-SECTIONS
ALUMINUM POWDER-COATED STANDARD T-SECTIONPVC CONDUIT FITTED IN PANEL
Standard system explosion view with structural aluminium trimmings
Tel : 011 979-1885
Our company and modular building is also tested and Agrement certified. As optional we offer
the agrement Afripanel modular system mostly for municipal approvals. The difference is that a
additional fire board cladding is fixed to the inside of each building to achieve a minimum 30min
fire rating as per Agrement requirements.
Tel : 011 979-1885
7
Tel : +2711 979-1885
• Quick installation
• Can be used for temporary and permanent accommodation
• 18/25mm plywood is placed on top of the frame.
• Light 2mm lip channel steel.
• Unlimited floor space can be designed accordingly
• 2.44m wide to fit on a truck and just bolted together on site
2. Steel chassis
3. Windows
• Aluminium windows are clipped in ,so no pop rivets
• 500 – 1800mm width or height.
• Openers are top hung or sliding windows
• Windows are installed at our factory in to the panels.
• Optional security bars.
• Optional Fly screen nets
• 0.8m lip channel Galvanized steel.
• Can be made and designed to suit strength
for any building size required.
Advantages against traditional wooden roof trusses
• Light weight
• High strength to weight ratio.
• Save on labor and installation.
• Lifetime durability.
4. Trusses
• Adjustable chassis feet for uneven surfaces
8
Tel : +27 11 979-1885
5. IBR Corrugated roofing over tusses
• Our roof trusses are covered with 0.5mm Chromadek
• Colors available as per clients request
•
• IBR roof plate are 760mm wide.
6. Aluminum Extrusions
• We have a variety of aluminum extrusions to compliment
our buildings.
• Our extrusions are designed to make construction time
faster.
• All aluminum extrusions are 2mm thick and powder coated.
• Chromadek extrusions are 0.5mm thick and double folded.
• We manufacture insulated panel doors with a wood pattern.
• glass doors for external use, and wooden doors for
internal use.
• The advantage of insulated doors are that you have a
full energy efficient building when it is combined with
the rest of the insulated panel building.
• All handles and hinges are powder coated aluminum
• Lock are all manufactured with a good quality triple lock.
7. Doors
ADDITIONAL EXTRAS FOR TURNKEY PROJECTS
a. Kitchen unit all in one and full domestic and
Commercial kitchens. b. Bathroom units all in one and executive bath rooms
c. Air conditioners
8.. Paint
9
Tel : +27 11 979-1885
• Our building system can be painted with PVA or enamel,
provided that the correct applying procedures are followed.
We will gladly advise our clients.
d. Flooring solutions