AFCO Equipment & Engineering | 800.345 · AFCO Equipment & Engineering | 800.345.1329 Page 9...

AFCO Equipment & Engineering | 800.345.1329


Chemical Feed Systems – Drum Pumps

SETHCO Direct Drive Sealless Drum Pumps

Part Number Model Tube GPM Wetted Materials Photo Notes

AF03H09P P90H-30 30/76 35 Polypropylene

Tefzel® + Hastelloy C®

Viton®

AF04H09P P90H-40 40/101 35

AF05H09P P90H-50 50/127 35

AF06H09P P90H-60 60/152 35

AFK03H09 P90H-30K 30/70 35 PVDF

Tefzel® + Hastelloy C®

Viton®

AFK04H09 P90H-40K 40/101 35

AFK05H09 P90H-50K 50/127 35

AFK06H09 P90H-60K 60/152 35

AFS04S09 P90S-40S 40/101 35

SS-316 Carp. 20

PVDF Teflon®

TOLCO Drum Pumps

Part Number Model Description Photo Notes

AF090905 DSP

Plastic drum siphon pump with bellows action, 2" IPS adaptor for steel and plastic drums. Flip top vent opening to stop siphon flow. Fits standard 15, 30 or 55 gallon drums. 5 GPM max flow rate, 3.5 GPM average.

AF090904 TDP

Polyethylene and polypropylene construction. Restrictor clips for variable delivery per stroke. 3/4" and 2" IPS adaptors and separate pail adaptor. Fits 5 gallon plastic pails, 15, 30 and 55 gallon drums.

BECKSON Drum Pump


AF090900 236

The Beckson hand pumps will eliminate the lifting and tilting of drums. They are designed to transfer most cleaning products including acids with relative ease. The body and shaft are constructed of a special polyvinyl chloride with the valves and patented seals of DuPont's Viton®. The pumps are 38" long with a diameter of 1-1/2". 28 oz. per stroke.


NZ-Action Drum Pump – 55 gal


AF090899 55 Gal

Resistant to a wide range of acid, alkaline, caustic, and chlorine based chemicals, oils, crop chemicals, diesel, liquid fertilizers & viscous products. Outputs 15 ozs. per stroke. STANDARD FEATURES: • Polypropylene and polyethylene construction • Anti-pumping safety lock on handles • Swivel Discharge spout for drip-free operation

Prominent Sigma® Pumps AC Powered | Metering Pumps

The ProMinent® Sigma/ 2 diaphragm metering pump has a high strength metal-lined housing for those components subject to load, and an additional plastic housing to protect against corrosion. The reproducible metering accuracy is better than ±2 % providing installation has been correctly carried out, and in the stroke length range of 30 % - 100 %. The stable, corrosion resistant metal and plastic housing is rated IP 65. To facilitate adaptation of the pumps to the widest possible range of processing requirements we offer a choice of three gearbox ratios, three liquid end sizes, two liquid end materials and either contact or analogue signal (e.g. 0/4 - 20 mA) control options in the form of the S2Ca Sigma controller.

Sigma 2 HM (@ 50Hz)

Part Number Model Material* PSIG GPH Strokes / Min Notes

AF05021 12050 PVT / SST 145/232 13.2 73

AF09021 12090 PVT / SST 145/232 23.7 132

AF03121 12130 PVT / SST 145/232 34.3 198

AF02170 07120 PVT / SST 102 31.7 73

AF02270 07220 PVT / SST 102 58.1 132

AF05340 04350 PVT / SST 58 92.5 198

* Material

Material Liquid End Suction / Discharge Connector

Seals Balls Integrated Pressure Relief Valve

PVT PVDF PVDF PTFE Ceramic / Glass PVDF/FPM

SST Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel/FPM


Chemical Feed Systems – Pumps

GRACO Husky Standard 1” Pumps Air-Operated | Double Diaphragm Pump This diaphragm pump is equipped with an effective and reliable air valve system. Pumps are available in aluminum, stainless steel, acetal, polypropylene and kynar.

Applications: Drum fluid transfer Unloading fluids Chemical evacuation Ceramic glaze supply Dewatering and sump evacuation

Part Number Material Size Flow Rate Photo Notes

AF031504 GRACO Polypro 1“ ANSI Flange

40 GPM

AF031516 GRACO

Kynar/Teflon 1” ANSI Flange

40 GPM

Yamada Standard Pumps Air-Operated | Double Diaphragm Pump This diaphragm pump is equipped with an effective and reliable air valve system. Pumps are available in aluminum, stainless steel, acetal, polypropylene and kynar.

Applications:

Drum fluid transfer Unloading fluids Chemical evacuation Ceramic glaze supply Dewatering and sump evacuation

Part Number Model & Material Size Flow Rate Photo Notes

???????

YAMADA

NDP-5 Polypropylene

NPT

¼“ NTP 3.4 GPM

More YAMADA Pumps on Page 5


Yamada Standard Pumps - Continued Air-Operated | Double Diaphragm Pump


???????

YAMADA

NDP-5 Kynar NPT

¼” NTP 3.4 GPM

???????

YAMADA

NDP-15

Polypropylene NPT

½” NTP 13.5 GPM

???????

YAMADA

NDP-15 Kynar NPT

½” NTP 13.5 GPM

???????

YAMADA

NDP-20

Polypropylene, NPT

¾” NTP 28.0 GPM

???????

YAMADA

NDP-20 Polypropylene,

ANSI Flange

¾” ANSI

Flange 28.0 GPM

More YAMADA Pumps on Page 6


Yamada Standard Pumps - Continued Air-Operated | Double Diaphragm Pump


???????

YAMADA

NDP-25

Kynar NPT

1” NTP 49.0 GPM

???????

YAMADA

NDP-25

Polypropylene

NPT

1” NTP 49.0 GPM

???????

YAMADA

NDP-25

Kynar ANSI Flange

1” ANSI Flange

49.0 GPM

???????

YAMADA

NDP-25 Polypropylene

ANSI Flange

1” ANSI

Flange 49.0 GPM

???????

YAMADA

NDP-25

Metal NPT

1” NTP 49.0 GPM


Chemical Feed Systems – Allocation Systems

Concentration Controllers

The Concentration Controller features an electronic sensing control that will monitor the total dissolved solids (T.D.S.) of chemical concentration in a wash or make-up tank and automatically activate a reliable, self-priming peristaltic pump to feed chemical and maintain preset, consistent solution strength in commercial washers, CIP tanks, or other similar applications.

Proven dependability and state-of-the-art technology built into a heavy duty, water-resistant stainless steel case. Plug-in Modular Electronics Optional Temperature Compensation Instant Concentration Control Adjustable Delay Warnings Buzzer Volume Control Switch Pulse/Continuous Feed Switch Over Feed Limit Switch Dual Range Control Self Priming Peristaltic Pumps Feed Rate up to 226 oz./min. Water-tight "NEMA 4: Style S.S. Case Pre-wired for 115 or 230 VAC 50/60 Hz

Part Number Model Description Dimensions Weight Flow Rates Notes

7106630-01 KIC-28120AP KIC-140 w/KP 8120 Pump 6"W X 9"H X 7"D 16 lb 23oz/min

7106633-01 KIC-28120BP KIC-140 w/KP 8120B Pump 6"W X 9"H X 7"D 16 lbs 40 oz/min

7106632-01 KIC-29130P KIC-140 w/KP 9130 Pump 6"W X 9"H X 7"D 21 lbs 149 oz/min

7106634-01 KIC-29270P KIC-140 w/KP 9270 Pump 6"W X 9"H X 7"D 21 lbs 223 oz/min

Common Parts List

Part Number Model Description Dimensions Notes

AF031630 T-86 E 20” Replacement Squeeze Tube 20”


Easy Fill Simple air operated chemical allocation / transfer system. Up to 6 pumps to accommodate your transfer / allocation needs. Pictured 3 pump system. When ordering specify the number of pumps / products needed.

Part Number Model Description GPM Notes

AF08EESYFILL-6 6 6 Pump unit with P56 Santoprene Fitted Pumps 3


Chemical Feed Systems – Metering Pumps

Peristaltic Metering Pumps The Peristaltic Metering Pump (PMP) provides chemical control for food processing plants, cooling towers, spray

washers, bottling plants, grease traps, sewage treatment, conveyor lubrication, boilers, and more. The peristaltic

pump uses the rotation of an elliptical block to cause a vacuum and rapid self priming. The pump is mounted on a stainless steel watertight case that is designed to withstand the harsh environments of industrial applications.

Valve-less Pump

Microprocessor Based Controls

Stainless Steel Watertight Case

Self Priming

Fixed Speed or Variable Speed

Wide Range of Flow Rates

Pumps up to 30 PSI

PMP 500 Series - Voltages Available: 115/230 VAC, 50/60 HZ

Part Number Model Description Tube Type Max PSI Flow Rates Notes

8452134-01 PMP-530 AC Power - Fixed Speed T-50 E 30 2.4 oz / Min

8453142-01 PMP-5100 AC Power - Fixed Speed T-50 E 30 9.3 oz / Min

PMP 800 Series - Voltages Available: 115/230 VAC, 50/60 HZ

Part Number Model Description Tube Type Max PSI Flow Rates Notes

8457143-01 PMP-8120 A AC Power - Fixed Speed T-50 E 30 23 oz / Min

8457330-01 PMP-8120 B AC Power - Fixed Speed T-50 E 30 40 oz / Min

Common Parts List

Part Number Model Description Dimensions Notes




Chemical Feed Systems – Metering Pumps

PMP Plus Electrical Diaphragm Metering Pumps The PMP Plus Electric Diaphragm Pump is a highly reliable and simple design with few moving parts that features a heavy duty, long life motor that produces high pressure yet, low pulsation pumping action. These field proven pumps are engineered for aggressive chemical, high duty cycle applications.

High resolution variable speed controls allow you to “dial in” the

precise flow rate required for a wide variety of metering applications

Flow Rates: 3.1, 2.8, 1.2 and .6 gal/min (11.6, 10.6, 4.5 and 2.3 lit/min)

Long lasting EPDM or Viton seals for a variety of chemicals More consistent dosing as flow rates “hold” for life of the valves

No squeeze tubes to change or service Quick connect “bayonet” style inlet/outlet fittings Continuous duty rated motors Engineered for aggressive chemical, high duty cycle applications 70 PSI (4.83 bar) pressure switch option

PMP PLUS Series | Voltages Available: 115/230 VAC, 50/60 HZ

Part Number Model Description Photo Max PSI Flow Rates Notes

8457763-01 ?? PMP-PLUS Peristaltic

110 V

PMPP-8110V w/ peristaltic pump and EPDM squeeze tube

30 .25 GPM

32 oz/min

8457773-01 ?? PMP-PLUS Peristaltic

110 V

PMPP-9100V w/ peristaltic pump and EPDM squeeze tube

30 .6 GPM

76 oz/min

8457766-01 ?? PMP-PLUS Diaphragm

110 V

PMPE-770V1.5 w/ EDP and EPDM valve seals/diaphragm w/ bypass at 100 PSI

100 1.2 GPM

154 oz/min

8457768-01 ?? PMP-PLUS Diaphragm

110 V

PMPE-770V.4 w/ EDP and EPDM valve seals/diaphragm w/ bypass at 100 PSI

100 .6 GPM

76 oz/min

** VITON seals available, call 800.345.1329 for more information


Chemical Feed Systems – Injectors

Dosatron Chemical Injection Systems Water Flow Driven| Metering Injectors The Dosatron injectors can dispense a wide range of solutions from fertilizers to soaps. Its wide injection ratio range makes it a popular unit for many applications. This Dosatron injector works great for sanitizing, foam cleaning, pressure washing and vehicle washing.

Part Number Model Ratio Pipe Size

Pressure PSI

GPM % Photo Notes

AF031201

DI-110 1:100 – 1:10 ¾” 7 - 57 .05 – 11.0

AF031214 DI-14 1:500 – 1:50 ¾” 4.3 - 85 .05 - 14 .2 – 2.0

AF031200 DI-150 1:100 – 1:20 ¾” 4.3 - 85 .05 - 11 1.0 – 5.0

Dosmatic Chemical Injection Systems Water Flow Driven| Metering Injectors

Part Number Model Ratio Pipe Size

Pressure PSI

GPM % Photo Notes

AF031202

MINIDOS 1% 1:500 – 1:100 ¾” 6 - 140 .03 - 12

AF031303E

A12 - EPDM 1:200 – 1:40 ¾” 6 - 100 .03 - 12

AF031216

A12 (2.5%) 1:200 – 1:40 ¾” 6 - 100 .03 - 12 2.5

AF031301

SUPERDOS 30 5%

1:250 – 1:20 1” 5 - 100 .15 - 30 2.5

AF031215

SUPERDOS 30 2.5%

1:500 – 1:40 1” 5 - 100 .15 - 30

AF031321

SUPERDOS 20 10%

1:50 – 1:10 1” 5 - 65 .04 - 20


Chemical Feed Systems – Portable Foamers

AFCO UltraFoam 15 Gallon Portable Foamer

Part Number Model Water Pressure Flow Rate Temp Photo Notes

AF082000 15 Gal 40 to 80 psi 2 GPM Up to 130ºF

Spare Parts: AF082000 Ultra Foam

** see next page for details

Location Part # Description QTY Notes

1 AF08FOAMCART SS Frame 1

2 AF041203 Enclosure Hoffman 1

3 AF061701 Wheels 2

4 AF061702 Bearings Plastic Wheel 4

5 AF010924 Washers Flat 1 5/8" OD ss 4

6 AF061714 Cotter Pins 3/32- 1/14 ss 2

7 AF020152 Adaptor Nipple 1/4" OC- Body 1/4" MPT ss 1

8 AF020153 Adaptor 1/4" MPT - 1/4" FPT npt 2

9 AF010925 Washer 1 1/4" OD ss 2

10 AF021802 Regulator 1/4" brass 1

11 AF020900 Gauge 1/8" 1

12 AF020787 Elbow 1/4" MPT- 3/8" Barb brass 2

13 AF022737 Needle Valve 1/4" FPT pvc 1

14 AF010573 Hex Nut Metal - (needle valve) 1

15 AF020154 Adaptor 1/4" MPT- 3/8" Barb brass 1

16 AF022738 Check Valve 3/8" Barb- Viton pvc 1

17 AF022215 Tee 1/2" ss 1

18 AF020155 Adaptor 1/2" MPT- 3/8" Hose poly 2

19 AF010926 Shims 7/8" ID- 1 1/4" OD ss 3

20 AF020133 Adaptor 1/2" MPT- 3/4" Hose barb npb 2

21 AF031401 Pump 3/8" Air Viton 1

22 AF022406 Poly Braid 1/4" 1 foot


Spare Parts: AF082000 Ultra Foam continued …

** continued on next page


23 AF022411 Poly Braid 3/8" 5 feet

24 AF022019 Strainer 1/4" F 1

25 AF020156 Adaptor 1/4" MPT- 3/8" Barb brass 1

26 AF010325 Hose Clamp 5/16"- 7/8" ss 10

27 AF010309 Hose Clamp 1/8"- 5/16" ss 2

28 AF020788 Elbow 1/8" MPT- 1/4" Barb 1

29 AF010132 Bolt 10 X 24 X 7/8" ss 4

30 AF010509 Nut 10 X 24 X ss 4

31 AF041412 Label Ultra Foam 1

32 AF021104 Hose - Blue Foam 3/4" 30 feet

33 AF022610 Ball Valve 1/2" smc 1

34 AF020402 Bushing 1/2" X 3/8" F ss 1

35 AF020406 Nipple 3/8" MPT X 8" Millville 1

36 AF091024 Tank 15 gallon 1

12

23

10

8

11

28

12

13

18 19 17

26

27

16

21

25

22


Spare Parts: AF082000 Ultra Foam continued …

13

23 / 24

1

20

32

36

33

34

35

20

3

5

6

2

7

9 9

7

20

1


AFCO Ultra Sanitizer 15 Gallon Portable

Chemical Feed Systems – Sanitizers

Spare Parts: AF082003 Ultra Sanitizer

** continued on next page …


AF082003 15 Gal 40 to 80 psi 2 GPM Up to 130ºF


1 AF08FOAMCART SS Frame 1

2 AF041203 Enclosure Hoffman 1

3 AF061701 Wheels 2

4 AF061702 Bearings Plastic Wheel 4

5 AF010924 Washers Flat 1 5/8" OD ss 4

6 AF061714 Cotter Pins 3/32- 1/14 ss 2

7 AF020152 Adaptor Nipple 1/4" OC- Body 1/4" MPT ss 1

8 AF020153 Adaptor 1/4" MPT - 1/4" FPT npt 2

9 AF010925 Washer 1 1/4" OD ss 2

10 AF021802 Regulator 1/4" brass 1

11 AF031401 Pump 3/8" Air Viton 1



14 AF022019 Strainer 1/4" F 1

15 AF020156 Adaptor 1/4" MPT- 3/8" Barb poly 1

16 AF010325 Hose Clamp 5/16"- 7/8" ss 4

17 AF010309 Hose Clamp 1/8"- 5/16" ss 2

18 AF020788 Elbow 1/8" MPT- 1/4" Barb brass 1

19 AF010132 Bolt 10 X 24 X 7/8" ss 4

20 AF010509 Nut 10 X 24 X ss 4

21 AF021321 Nipple 1/2" X 3" pvc 1


Spare Parts: AF082003 Ultra Sanitizer continued …



22 AF021015 Gun 1

23 AF020609 Coupling 1/2" FPT, pvc 1

24 AF020403 Bushing 1/2" X 1/4" MPT pvc 1

25 AF02N0136 Nozzle 25/20 ss 1

26 AF041415 Label Ultra Sanitizer 1

27 AF021102 Hose 1/2' blue 30

28 AF020014 Adapt. 1/2" MPT X Barb ss 1

29 AF041413 Label Operation Procedures 1

30 AF041414 Label Precaution 1

31 AF091024 Tank 15 gallon 1

32 AF010603 Plug 1/4" brass 1

33 AF020900 Gauge 1/8" air 1

16

33

27

12

17

11

2

9

7

10 29 | 30

18

8


Spare Parts: AF082003 Ultra Sanitizer continued …

28

26

1

22

31

25

27

3

5

6

2

7

9 7

9

4


Chemical Feed Systems – Doorway Sanitizers

AFCO SaniMat Doorway Sanitizing System

Part Number Model Description Power PSI Photo Notes

AF081000A SPSD Single pickup & Single

doorway system 110V

Water 60 Air 120

AF081000B DPSD Dual pickup & Single

doorway system 110V

Water 60 Air 120

AF081000C SPDD Single pickup & Dual

doorway system 110V

Water 60 Air 120

AF081000D SDDD Dual pickup & Dual

doorway system 110V

Water 60 Air 120

Spare Parts: AF081000 A | B | C | D ** continued on next page

Location Part # Description Notes

11 AF053808 Timer AB GP 8 pin 120 VAC

12 AF022615 Air Valve No. 225B-111CAAA

13 AF021802 Air Regulator, No 20R113FC

14 AF020900 Gauge, 0 – 160 PSI

15 AF053410 Solenoid ½” 2w 120 VAC Conduit

16 AF020305 Foam Block, Dual Pick Up

17 AF041209 Base & Cover, Foamer

18 AF010315 U-Bolt Assembly

19 AF020729 Elbow, ¼ Poly Street

20 AF022625 Check Valve ¼”

21 AF022311 Metering Orifice, Set of 20

22 AF022405 Tube ¼” Chemical

23 AF022003 Strainer ¼” Chemical

24 AF020707 Elbow ¼” Male Push lock 90º

25 AF022407 Tube ¼” x 16” Poly

26 AF02N0011 Nozzle 12” Foam

27 AF010200 Bracket, Nozzle Wall

28 AF091020 Jeri Jug, 2-1/2” Gal Chemical

29 AF091020-LID Lid, Jeri Jug 2.5 Gal

30 AF041103 Bracket, Jeri Jug 2.5 gal

48 AF041202 Enclosure

49 AF041404 Panel


Spare Parts: AF081000 A | B | C | D


Location Part # Description Notes

56 AF053601 End Stop

59 AF053600 Terminal

60 AF051902 Fuse Terminal

65 AF022517 Bulkhead Fittings ¼”

70 AF052700 Pushbutton – Black

71 AF051401 Contact Black, NO

72 AF052706 Latch

73 AF053501 Switch 2 Position

74 AF052201 LED Module

12

13

25

15

72

48

11

49

14


Spare Parts: AF081000 A | B | C | D

15

48

29

19

20

22

26

28

30

24

17

16

27

21

70

73


Chemical Feed Systems – Sanitizers

Low Pressure Sanitizing Station Low Pressure | 35 - 125 PSI Water | Wall Mount | 5 to 8 GPM |


AF973750 517 35 – 125 PSI 5.10 GPM @ 40 PSI

To 160ºF

Mixing Station Spare Parts: (see back side for details)

Part Number Description Notes

413641 Sanitize Ball Valve

381160 Injector Body

257379 Chemical Suction Side 90º Elbow

491311 Chemical Check Valve

443798 Color Coded Metering Tips – 20 PK

119281 Hose Barb

134306 Hose Clamp

473006 Chemical Pick Up Tube – 6’

150115 Chemical Strainer

803750 Sanitizing Hose – 50’

803775 Sanitizer Hose – 75’

413641 Sanitizer Wand Ball Valve (Remove if pressure exceeds 100 PSI)

536603* Wand

180146* 40100 Sanitizer Spray Nozzle

* Wand Parts


Low Pressure Sanitizing Station Low Pressure | 35 - 125 PSI Water | Wall Mount | 5 to 8 GPM |


Chemical Feed Systems – Drop Stations

HP SS 3-in-1 Drop Station High-Pressure | Sanitize | Rinse | Foam | SS |

Part Number Model Water

Pressure (PSI) Water Flow

(GPM) Air

(PSI) Photo Notes

AF918227

W-20 SS Drop Station Complete

400 – 1000 Foam - 1.6

Sanitizer - 4.0 @ 700 PSI

20 – 125

Drop Station Options & Spare Parts: (see back for details)

# Q Part # Description Notes

1 1 150340 Strainer “Y” SS 3/8”

2 1 429006 Nipple NPB HEX 3/8”

3 1 645406 Cross NPB 3/8”

4 2 429640

SS Nipple SS 3/8” x 4”

5 2 257380 Elbow St NPB 3/8”

6 3 413623 Ball Valve SS 3/8” FF

7 2 429615

SS Nipple SS 3/8” x 1 ½”

8 1 381020

SS 3/8” W-20 SS Injector

Body

9 1 429620

SS Nipple SS 3/8” x 2”

10 2 350443 QD SS Plug 3/8” FPT

11 1 350446 QD SS Socket 3/8”

FPT

12 1 257378 Elbow ST NPB ¼”

13 1 491324 Chemical Check Valve

SS ¼” HB

14 1 443798 Color Coded Metering

Tips – 20 PK

15 2 473006 PVC Tube ¼” x 6’

16 2 150115 Hastelloy Chemical

Strainer ¼”

17 1 429600

SS Close SS Nipple 3/8”

18 1 429660

SS SS Nipple 3/8” x 6”

19 1 212110

SS HP SS Foamer Body

20 1 119272 Hose Barb NPB ½” x

½” MPT

21 1 257379 Elbow ST PP ¼”

22 1 491311 Chemical Check Valve

PP / Viton ¼”

23 1 491306 SS Check Valve ¼”

MM

24 1 257378 Elbow ST NPB ¼”

25 2 506004 Coupling NPB ¼”

# Q Part # Description Notes

26 1 660797 Needle Valve NPB ¼”

FM

27 1 429004 Nipple NPB Hex ¼”

28 1 413602 Ball Valve NPB ¼”

FFB

29 6 392458 SS Plate #6 U-Bolt

30 3 392486 SS U-Bolt Assembly

#6 Square

31 1 222115 Base & Cover C/R/F

32 1 195050 HP Hose 3/8” x 50’

BNM

33 1 320438 Easy Trigger Gun ST-

2305

34 1 536518 SS Wand ¼” x 18”

¼” MxM

35 1 180131 SS Nozzle ¼” 2520

36 1 134302 Hose Clamp ½”

37 1 803650 Blue Hose ½” x 50’ ½” MPT (One End)

38 1 536603 Wand PP ¾” x 14”

½” FxF

39 1 180152 Nozzle NPB ½” -

50250


Chemical Feed Systems – Drop Stations

HP SS 2-in-1 Drop Station High-Pressure | Rinse | Foam | SS |

Part Number Model Water Pressure (PSI)

Water Flow (GPM)

Air (PSI)

Photo Notes

AF918405

SS Drop Station Complete

400 – 1000 Foam - 1.6 @ 700 PSI

20 – 125

Drop Station Options & Spare Parts: (see page number 24 for details)


150340 Strainer “Y” SS 3/8”

413623 Ball Valve SS 3/8” FF

257378 Elbow ST NPB ¼”

443798 Color Coded Metering Tips – 20 PK

473006 PVC Tube ¼” x 6’

150115 Hastelloy Chemical Strainer ¼”

212110 SS HP SS Foamer Body

119272 Hose Barb NPB ½” x ½” MPT

491311 Chemical Check Valve PP / Viton ¼”

506004 Coupling NPB ¼”

660797 Needle Valve NPB ¼” FM

413602 Ball Valve NPB ¼” FFB

195050 HP Hose 3/8” x 50’ BNM

320438 Easy Trigger Gun ST-2305

536518 SS Wand ¼” x 18” ¼” MxM

134302 Hose Clamp ½”

803650 Blue Hose ½” x 50’ ½” MPT (One End)

536603 Wand PP ¾” x 14” ½” FxF

180152 Nozzle NPB ½” - 50250

180512 Rinse Nozzle – 0512

257358 90º Elbow

491302 Air Check Valve


HP SS 3-in-1 Drop Station High-Pressure | Rinse | Foam | SS |


Chemical Feed Systems – LP Foamers

Low Pressure Chemical Foaming Stations Low Pressure | 35 – 150 PSI Water | Air | Wall Mount |


Pressure Water Flow Air PSI Photo Notes

AF918105 POLY Complete

30 – 150 PSI .5 GPM @ 50

PSI 30 – 120 3 scfm

AF915115 STAINLESS Complete

30 – 150 PSI .5 GPM @ 50

PSI 30 – 120 3 scfm

Foamer Options & Spare Parts: (see back side for details)


AF413608 Foam Ball Valve

AF288360 Air Regulator

AF212135 SS Foamer Body LC SS (Stainless Steel body)

AF212135 Foamer Body LC

AF257379 Suction Elbow

AF413603 Air Ball Valve

AF491302 Air Check Valve

AF257378 Air Elbow

AF491311 Chemical Check Valve

AF443798 20 PK Metering Tips

AF119281 Hose Barb

AF134306 Hose Clamp

AF473006 Chemical Pick Up Tube – 6’

AF150115 Chemical Strainer

AF803750 Foam Hose – 50’

AF803775 Foam Hose – 75’

AF413641 SS Discharge Ball Valve (remove when pressure exceeds 100 PSI)

AF536603 Wand

AF180152 Foam Nozzle


LC / LC SS Wall Foamer (LC & LC SS Models)


Chemical Feed Systems – LP Foamers

Ultimate Low Pressure Foaming Station Low Pressure | 35 – 150 PSI Water | Air | Wall Mount |



AF914105 Ultimate Foamer Complete

30 – 150 PSI 1.46 GPM @ 50 PSI

30 – 120

4 cfm

AF914115

Ultimate SS Foamer Complete Stainless Steel

30 – 150 PSI 1.46 GPM @ 50 PSI

30 – 120

4 cfm



413614 Foam Ball Valve

288360 Air Regulator

212050 SS Foamer Body ONLY - Ultimate SS (Stainless Steel body)

212050 Foamer Body ONLY - Ultimate

257379 Suction Elbow

413602 Air Ball Valve


257358 90º Air Elbow


443798 20 PK Metering Tips

119288 Hose Barb

134306 Hose Clamp



803750 Foam Hose – 50’

803775 Foam Hose – 75’

413641 SS Discharge Ball Valve (remove when pressure exceeds 100 PSI)

536603 Wand

180152 Foam Nozzle


Ultimate Low Pressure Foaming Station Ultimate | Ultimate SS


Chemical Feed Systems – HP Foamers

High-Pressure Foaming Station



AF918105 HP Foamer Complete

400-1000 PSI 1.6 GPM

@ 700 PSI 30 – 120 5 scfm

AF918115

HPSS Foamer Complete Stainless Steel

400-1000 PSI 1.6 GPM

@ 700 PSI 30 – 120 5 scfm



552007 Strainer

552009 Strainer Element

552002 Strainer Adapter

660797 Air Needle Valve

413603 Air Ball Valve


257378 St. Elbow

212110 Foamer Body ONLY – HP

212110 SS Foamer Body ONLY – HPSS (Stainless Steel Body)

257379 Chemical side 90º Elbow


443798 20 PK Color Coded Metering Tips



119272 Hose Barb

134302 Hose Clamp

803650 Foam Hose 50’

803675 Foam Hose 75’

536603 Wand

180152 Foam Nozzle


High-Pressure Foaming Station High-Pressure | 400 - 1000 PSI Water | Air | Wall Mount |


Chemical Feed Systems – Mixing Stations

Push Lever Mixing Station


AF981100 1 WAY 25 – 100 PSI

Low – 1.8 GPM High – 4.0 GPM

Bottle Fill - .78 GPM @ 40 PSI

To 160ºF

AF981200 2 WAY 25 – 100 PSI



To 160ºF

AF981300 3 WAY 25 – 100 PSI



To 160ºF

AF981400 4 WAY 25 – 100 PSI



To 160ºF



416305 Push Lever Valve

102050 Washer w/ Screen

273413 Backflow Preventer

102020 Adapter

366470 Mixing Station Injector Body – High Flow

366473 Mixing Station Injector Body – Low Flow

366476 Mixing Station Injector Body – Bottle Fill

257379 Chemical Suction Side Elbow


443798 20 PK of Metering Tips


475100 Pick Up Tube Weight


473300FT Discharge Tube – 6’ (old number 473300)


Push Lever Mixing Station Low Pressure | 25 - 100 PSI Water | Wall Mount |



Ball Valve Mixing Station


AF985100 1 WAY 25 – 100 PSI



To 160ºF

AF985200 2 WAY 25 – 100 PSI



To 160ºF

AF985300 3 WAY 25 – 100 PSI



To 160ºF

AF985400 4 WAY 25 – 100 PSI



To 160ºF



413602 Ball Valve

102050 Washer w/ Screen

273413 Backflow Preventer

102020 Adapter

366470 Mixing Station Injector Body – High Flow

366473 Mixing Station Injector Body – Low Flow

366476 Mixing Station Injector Body – Bottle Fill

257379 Chemical Suction Side Elbow


443798 20 PK of Metering Tips


475100 Pick Up Tube Weight


473300FT Discharge Tube – 6’ (old number 473300)


Ball Valve Mixing Station Low Pressure | 25 - 100 PSI Water | Wall Mount |



High Volume Mixing Station


AF985835 1 WAY 35 – 125 PSI 10 GPM

@ 35 PSI To 160ºF


# Part Number Description Notes

1 413648 Ball Valve SS ¾” FM

2 491300 Solution Siphon Breaker ¼”

3 366635 ¾” Mixing Station Injector Body, PP, 1035HC

4 119288 Hose Barb, NPB, ¾” x ¾” MPT

5 257378 Elbow, St., NPB, ¼”

6 491311 Check Valve, Chemical, PP/Viton, ¼”

7 443798 Color Coded Metering Tips – 20 PK

8 473000 Pick Up Tube, PVC, ¼” x (specify length when ordering)

9 150115 Chemical Strainer, Hastelloy, ¼”

10 392486 U-Bolt Assembly, SS, #6 Square

11 222111 Base & Cover, Standard / Hinged

12 134306 ¾” Hose Clamp

13 A 803750 ¾” Hose – 50’

13 B 803775 ¾” Hose – 75’

* 413641 Wand Ball Valve

* 536603 Wand

* Wand Parts


High Volume Mixing Station Low Pressure | 35 - 125 PSI Water | Wall Mount |


Portable 4-Way Fogger – 5 Gallon Model

Variable height adjustment Adaptable to 2-way operation for fogging narrow areas like hallways All stainless steel cart holds user-supplied, 5 gallon chemical/solution pail

Part Number Model Air Flow in CFM Fog Range Fog Type Photo Notes

AF08950701 5 GAL 305

60 PSI - 45.0 80 PSI - 60.0 100 PSI - 73.0

30 Feet Large Particles

Wet Fog

AF08950702 5 GAL 455

60 PSI - 45.0 80 PSI - 60.0 100 PSI - 73.0

30 Feet Large Particles

Wet Fog

Fogger Options & Spare Parts: (see back side for details)

# QTY Part Number Description Notes

1 1 257362 Elbow 90º NPB ½”

2 2 429932 Nipple SS ½ x 32”

3 1 506675 Coupling NPB ½”

4 1 223505 Fogger Hub SS 4-Way Port.

5 4 257604 Elbow St. 45º NPB ¼”

6 2 429704 Nipple SS ¼” x 2 ½”

7 2 305216 Bushing NPB 3/8” x ¼”

8 2 413605 Ball Valve NPB ¼” FMB

9 2 429698 Nipple NPB Reducing 3/8” x ¼”

10 4 214301 Fogger Body PP 1-Way

11 4 257379 Elbow St PP ¼”

12 4 491308 Metering Tip Holder

14 2 677902PP Push Lock TEE ¼”

15 2 473010 Chemical Tube ¼” x 10’

16 2 475100 Chemical Tube Weight ¼” PVC

17 2 150115 Chemical Strainer – Hastelloy ¼”

* 1 709283 5 Gallon Portable Cart Assembly SS (not pictured)

* 2 708605 Replacement Cart Wheels 10”

- 10 PK 443794 Metering Tips (optional)

- 4 491402 Chemical Check Valve (optional)

* Cart Parts – Not Shown


Portable 4-Way Fogger 5 Gallon | 4-Way | Adjustable to 2-Way |


Chemical Feed Systems – Spray Units

Hydro Spray Attach to a standard water hose, add AFCO product and spray solution at a given concentration. Hydro Spray is great for sanitizing applications in a small to medium operation. Utilize the Metering Tip Kit to adjust concentration.

Part Number Model Description Notes

AF091203 381 96 oz Hydro / Spray low-pressure / garden house

AF091219 383 48 oz Hydro / Spray low-pressure / garden house

Hydro Spray Parts List

Part Number Number Description Notes

10083713 1 Spray Gun & Quick Disconnect

10061502 2 Sprayer lid Assembly

688202 3a 48 oz Concentrate Container (Shown)

688201 3b 96 oz Concentrate Container

690014 4 Metering Tip KIT

500808 5 Suction Tube – 8”

609600 6 Foot strainer


Chemical Feed Systems – Flow / Foam Units

Hydro Foamer Attach to a standard water hose, add AFCO product and spray foam solution at a given concentration. Hydro Foamer is great for applying cleaners and sanitizers in a small to medium operation. Utilize the Metering Tip Kit to adjust concentration.


AF091211 481 96 oz Hydro / Foamer low-pressure / garden house

AF091214 483 48 oz Hydro / Foamer low-pressure / garden house

Hydro Spray Parts List

Part Number Number Description Notes

10083713 1 Spray Gun & Quick Disconnect

10061501 2 Foamer lid Assembly

688202 3a 48 oz Concentrate Container (Shown)

688201 3b 96 oz Concentrate Container

690014 4 Metering Tip KIT

500808 5 Suction Tube – 8”

609600 6 Foot strainer


Chemical Feed Systems – Spray Guns

Low Pressure Spray Gun (featured)

Designed to reduce operator fatigue Color bands for easy identification of gun’s spray capacity Interchangeable orifice caps between 10, 16, and 22 gpm (at 100 psi) Spray angles: 0° to 50° Adjustable spray pattern from hollow cone to solid stream Capacity range: 10 to 22 gpm (38 to 83 l/min) Pressure: 150 psi (10 bar) Temperature: 200° F (93° C) 1/2" NPT or BSPT (F) Brass or lightweight aluminum valve body construction with stainless steel trigger Corrosion-resistant White or black cover available

Part Number Model PSI GPM ºF Inlet Outlet Length Special Features Notes

AF02126 CU150A 150 22 200 1/2 - - See above

High-Pressure Spray Gun (featured)

Comfortable to use | Reduces operator fatigue

Easy trigger pull at high pressure Large area to accommodate work gloves Contour handle is comfortable to use for all hand sizes

Vented house keeps the handle cool at all times Designed for long-lasting dependable operation

High-impact nylon handle and trigger Stainless steel valve seat and ball Forged brass valve, Teflon back up ring and Viton O-rings Optional weep feature

Specifications

Maximum operating pressure: 5000 psi Maximum flow capacity: 10 gpm Maximum operating temperature: 300° F Inlet connection: 3/8" NPT/BSPT (F) Outlet connection: 1/4" NPT/BSPT (F) Weight: 25 oz Dimensions 7.83" x 7.56" x 1.35"

Part Number Model PSI GPM ºF Inlet Outlet Weight Special Features Notes

AF021033 AA70 5000 10 300 3/8 1/4 25 oz See above


Chemical Feed Systems – HP Spray Guns

HP Spray Guns


AF021036

AA30A

1500 5 200 1/4 11/16 8 Trigger Lock Nylon Handle Trigger Guard

AF021034

CW1500A

1500 10 300 1/4 3/8 8 Easy trigger pull SS valve seal &

ball

AF021037

AA 60

2500 6 300 3/8 11/16 8 ¾ SS Body Available

AF021038

AA 80

3000 10 300 3/8 3/8 9 Nylon Handle Trigger Guard

AF021003

PW4000A

4000 10 300 3/8 3/8 8 ¾ Fatigue-

Reducing Trigger

AF021035

PW4000AS

4000 10 300 3/8 3/8 8 ¾ Bottom trigger pivot and inlet

swivel


Chemical Feed Systems – HP Spray Guns | Hoses

HP Spray Guns


AF021010

ST1500

4000 12 300 3/8” FNPT

¼” FNPT

-

Special heat and chemical

resistant seals for optimum performance even in the harshest of

environments.

Fully rebuildable!

AF021016

WB750

750 15+ 180 3/8 3/8 - Variable fan

nozzle, Stay cool handle

AF021017

WB300

300 15+ 180 1/2 1/2 - Variable fan

nozzle, Stay cool handle

HP Hoses

Part Number Model PSI Size Color Length Special Features Notes

AF08BFH12-75 Foam Hose 750 ½” - 75’ w/ nozzle

AF08BFH34-40 Foam Hose 750 ¾” - 40’ w/ nozzle

AF08BFH12-50 Foam Hose 750 ½” - 50’ w/ nozzle

AF021112 HP Rawhide Hose 3000 3/8” Yellow 50’ -

AF021113 HP Rawhide Hose 3000 3/8” Yellow 75’ -


Chemical Feed Systems – Chemical Jugs

Chemical Jugs Container style may vary based on availability while apropriate volume will remain as listed. Lids will fit the container style you order.

Part Number Model Description Color Notes

AF091020 2.5 GAL 2.5 Gallon Chemical Jug Clear / White

AF091020-LID LID (2.5 GAL) Lid for the 2.5 Gallon Chemical Jug White

630 5 GAL 5 Gallon Chemical Jug Clear / White

480 LID (5 GAL) Lid for the 5 Gallon Chemical Jug White

AFCO customers enjoy the benefits of a color-coded chemical identification program. Individual chemical container tags: Marking each chemical container with a color-coded label significantly improves safety and ensures OSHA compliance. AFCO products: Our products are color-coded for your safety. All chemical drums and totes contain labels which correspond with your chemical jug labels. In addition to color-coded labeling system, many of our hazardous chemicals contain dye for identification … Acids are RED some Heavy Duty Alkaline products are BLUE and Chlorinated products are YELLOW.


Chemical Feed Systems – HP Spray Nozzles

HP Spray Nozzles

NOTE: When ordering specify the following information … ¼” WashJet MEG 1504 (exzample) SIZING GUIDE on next page (Page Number 46)

Model Size Photo Notes

MEG ¼”

VeeJet HVV ¼”

VeeJet HU ¼”

WashJet SA MEG ¼”

WashJet MEG ¼”

NOZZLE ID / ORDERING INFORMATION

1/4 MEG

15 04

Inlet

Connection

Nozzle

Type

Spray

Angle

Capacity

Size


Chemical Feed Systems – HP Spray Nozzles

HP Spray Nozzles NOZZLE FLOW RATES & NOZZLE NUMBERS A commonly used standard for nozzle size selection is the “nozzle number” which is equivalent to the nozzle capacity

in GPM at 4,000 PSI. Spray angle does not affect nozzle volume.

Nozzle Size = GPM x [Square Root (4000/PSI)] Example: 5 GPM at 1500 is a 8.0 nozzle

Nozzle Size

Orifice Diam. (inch)

NOZZLE PRESSURE - PSI

40 100 250 500 600 700 800 1000 1200 1500 2000 2500 3000 3500 4000

NOZZLE FLOW RATE – GALLONS PER MINUTE (GPM)

1 0.026 .10 .16 .25 .35 .38 .41 .44 .50 .54 .61 .72 .78 .88 .95 1.00

1.5 0.031 .15 .24 .38 .53 .58 .63 .67 .75 .82 .92 1.10 1.20 1.30 1.40 1.50

2 0.036 .20 .32 .50 .71 .77 .84 .89 1.00 1.10 1.20 1.40 1.60 1.70 1.90 2.00

2.5 0.040 .25 .40 .59 .88 .99 1.07 1.14 1.25 1.35 1.50 1.70 2.00 2.20 2.40 2.50

3 0.043 .30 .47 .69 1.10 1.20 1.30 1.40 1.50 1.65 1.80 2.10 2.40 2.60 2.80 3.00

3.5 0.048 .35 .55 .71 1.25 1.40 1.50 1.60 1.75 1.93 2.15 2.45 2.80 3.15 3.30 3.50

4 0.052 .40 .63 1.00 1.40 1.60 1.70 1.80 2.00 2.20 2.50 2.80 3.20 3.50 3.80 4.00

4.5 0.055 .45 .71 1.10 1.60 1.70 1.90 2.00 2.30 2.40 2.80 3.20 3.60 3.90 4.30 4.50

5 0.057 .50 .79 1.30 1.80 1.90 2.10 2.20 2.50 2.80 3.10 3.50 4.00 4.40 4.70 5.00

5.5 0.060 .55 .87 1.40 1.90 2.10 2.30 2.50 2.80 3.00 3.40 3.90 4.40 4.80 5.20 5.50

6 0.062 .60 .95 1.50 2.30 2.30 2.50 2.70 3.00 3.20 3.70 4.20 4.70 5.20 5.60 6.00

6.5 0.064 .65 1.00 1.70 2.40 2.50 2.70 2.90 3.30 3.60 4.00 4.60 5.10 5.50 6.00 6.50

7 0.067 .70 1.10 1.80 2.50 2.70 2.90 3.10 3.50 3.80 4.30 4.90 5.50 5.60 6.60 7.00

7.5 0.070 .75 1.20 1.90 2.70 2.90 3.10 3.40 3.80 4.10 4.60 5.30 5.90 6.10 7.00 7.50

8 0.072 .80 1.30 2.00 2.80 3.10 3.40 3.60 4.00 4.40 4.90 5.70 6.30 6.90 7.50 8.00

8.5 0.074 .85 1.30 2.20 3.00 3.30 3.60 3.80 4.30 4.60 5.30 6.00 6.70 7.40 8.00 8.50

9 0.076 .90 1.40 2.30 3.20 3.50 3.80 4.00 4.50 5.00 5.50 6.40 7.10 7.80 8.50 9.00

10 0.080 1.00 1.60 2.50 3.50 3.90 4.20 4.50 5.00 5.40 6.10 7.10 7.90 8.70 9.40 10.00

12 0.087 1.20 1.90 3.00 4.20 4.60 5.00 5.40 6.00 6.40 7.30 8.40 9.50 10.40 11.20 12.00

14 0.091 1.40 2.23 3.52 4.90 5.40 5.90 6.30 7.00 7.60 8.60 9.90 11.10 12.10 13.10 14.00

15 0.094 1.50 2.40 3.80 5.30 5.80 6.40 6.80 7.50 8.20 9.20 10.60 12.00 12.90 14.00 15.00

20 0.109 2.00 3.20 5.00 7.10 7.70 8.40 8.90 10.00 10.80 12.30 14.10 15.80 17.30 18.80 20.00

30 0.141 3.00 4.70 7.50 10.60 11.60 12.80 13.60 15.00 16.40 18.40 21.20 24.00 26.00 28.00 30.00

40 0.156 4.00 6.30 10.00 14.20 16.60 16.80 18.00 20.00 21.60 24.40 28.40 32.00 34.80 37.60 40.00


Hose Racks / Jug Racks SS Hose Racks | SS Jug Racks

Part Number Description Photo Notes

AF041100 Hose Rack, SS, Large

AF041102 Jug Rack, SS, 1 Gallon, Round

AF041103 Jug Rack, SS, 2 1/2 Gallon

AF041104 Jug Rack, SS, 5 Gallon


Chemical Feed Systems – Drum Containment

Drum Spill Pallets

Part Number Model Dimensions Capacity Photo Notes

AF2710WS 2 Drum Spill Pallet 53" L

28.5" W 5.63" H

2 Drums 5000 lbs

22 gallons

AF2711WS 4 Drum Spill Pallet 52.5" L 53" W 6" H

4 Drums 3000 lbs

43 gallons

AF2712WS 6 Drum Spill Pallet 77" L 53" W 6" H

6 Drums 4500 lbs

61 gallons

AF2713WS 8 Drum Spill Pallet 100" L

53.25" W 6" H

8 Drums 6000 lbs

77 gallons

AF3260WR Multi-Purpose Work

Ramp

25.38” L 46” W

6.13” H 1500 lbs

AF091300

Drum Wrench Works on

plastic plugs ¾” and 2”

-


AFCO UltraGraph The ultimate monitoring system The AFCO UltraGraph critical control parameter interface and data collection system is a portable process monitoring system capable of monitoring up to eight (8) process parameters simultaneously and recording data to compact flash that can easily be imported to Microsoft Excel for extensive historical analysis. Once the data is imported, all the power of Excel is available for graphing, statistical and historical data management.

Two (2) pH inputs | Two (2) Conductivity inputs | Two (2) Temperature inputs | Two (2) Flow inputs

Part Number Model Description Dimensions Conductivity Range Notes

AF08ULTRAGR UltraGraph AFCO Ultimate Monitoring System with Conductivity

12” W x 14” H x 8 “ D -

Configurable Display | Screenshots


Conductivity Sensors

Part Number

K=

Description

Fits In

Body Material Electrode Material

Photo

Notes

AF1600698 1.0 Inductive Probe with 25ft (7.6m) Cable

1/2” NPT

thread Polypropylene

Inductive / Enclosed

AF7005195 1.0 Conductive Probe w/ cell constant 1.0

7/8” Hole

Polypropylene Stainless Steel

AFC-12B 1.0 Conductivity Probe 1.5” in Polypropylene Stainless

Steel

AFCS50 PT100

1.0

General Purpose Inline and Submersible Conductivity Sensor w/ 20’ cable (up to 50’ optional)

1” MNPT

CPVC Stainless

Steel

AFCS51 PT100

1.0

General Purpose Conductivity Probe w/ 20’ cable (up to 50’ optional)

¾” NPT

Polypropylene 316 Stainless

Steel

AFCS51 PT100HT

1.0

General Purpose Conductivity Probe w/ 20’ cable (up to 50’ optional) HIGH TEMP

¾” NPT

Polypropylene 316 Stainless

Steel

AFCS52 PT100

1.0

General Purpose Inline and Submersible Conductivity Sensor w/ 20’ cable (up to 50’ optional)

¾” MNPT

316 Stainless Steel

316 Stainless Steel

AFCS41

PT100 1.0

High Temperature (up to 400ºF) Conductivity Probe. Great for boiler control applications. Blow down control, Condensate monitoring, Leak detection or Heat exchangers measurements

¾” NPT

PEEK 316 Stainless

Steel


Conductivity Sensors

Part Number

K=

Description

Fits In

Body Material Electrode Material

Photo

Notes

AFJCP101 1.0

Conductivity probe w/ temperature compensation and 8 pin connector

Drop-in

Epoxy Carbon

AFJCP105

5.0

Conductivity probe w/ temperature compensation and 8 pin connector

Drop-in

Epoxy Carbon

AFJCP392-

122

10 Conductivity probe ¾” NPT

Stainless Steel 316 SS

AFJCP3101C

C-02

1.0 Conductivity probe with cell and 10 ft cable

Drop-in

Epoxy Carbon


Conductivity Controls & Probes

Control Guard FCS

Water tight molded plastic case with latch Menu driven digital programming Password protected menus Conductive or inductive probes Optional secondary pump controller Operates peristaltic, electric or air operated pumps Optional low supply beacon Private label available Temperature compensating inductive probe holds chemical concentrations constant at any temperature Inductive probe never needs cleaning

* Pictured with 500 and 800 optional pump

Part Number Model Description Dimensions Conductivity Range

Notes

AF7165051 CG-FCS Control Guard base unit, IP-65

rated, 115 / 230 VAC (Pumps NOT Included)

13.25” W x 10.5” H x 7.5 “ D Cond – 80 ms Ind – 80 ms

Optional / Add On Equipment


1600698 Inductive Probe w/ 25ft. (7.6m) cable and 1/2” NPT thread

7005195 Conductive Probe w/ Cell Constant 1.0

7224520 Peristaltic 800 Pump Assy (Pump 1) w/ w/ T-66E Squeeze Tube (45 oz/min) (1350 ml/min)

7224519 Peristaltic 500 Pump Assy (Pump 2 ) w/ T-50E Squeeze Tube (18 oz/min) (532 ml/min)

0200503 Strobe, Control Guard FCS

1900775 Pump Trigger Switch [for #2 pump: KP 5100 0-100oz/min (250 ml/min)]

7164045 3/8” Air Solenoid Valve, 24 VDC

7140583 Limit Timer to control secondary pump run time w/signal or manual activation (DC Pumps)

7142326 Limit Timer to control secondary pump run time w/signal or manual activation (AC Pumps)

7142218 Event Timer w/ 20 Events/Day, One pump output (DC Pumps)

7142228-2 Event Timer w/ 20 Events/Day, One pump output (AC pumps)

7140586 Repeat Cycle Timer (0-12 min On/ 0-63 Min Off) (DC Pumps)

7141600 Repeat Cycle Timer (0-12 min On/ 0-63 Min Off) (AC Pumps)


Conductivity Controls & Probes

AFCO VisiCheck – Visual Indication of Concentration

Indicates Solution Strength Visually using conductivity Use with any point conductivity probe Wide selection of probes available Cost Effective Accurate to + or - 0.25% Indicator dial can be set to any conductivity setting desired Operates on 110-120VAC, 50-60 Hz

Excellent for use in the following Applications:

COP Tanks

Egg Washers Bakery Pan Washers CIP Wash Tanks Dairy Case Washers Bottle Washers in Brewery / Beverage applications

Great for accurately setting recycle time feed systems

Part Number Model Description Dimensions Range Notes

AF051513 100 Visual concentration indicator H 8.7” x W 4.7” x D 2.5” Adjustable

Rugged Chemical Resistant Enclosure

Set Point Adjustment

High Visibility Display


Hand Care & Janitorial

Dispensers | Soap | Spray | Foam

Part Number Description Color Capacity Photo Notes

????????

Wyandotte Dispenser TOUCH-FREE Dosage per stroke: Spray – 0.25 ml Lotion/Soap – 1 ml or 2 ml Foam – 0.25, 0.7 or 1 ml Standard Bottles: 1,000 ml/ 34 oz, HDPE bottle, bags or soft bottle

White 1000 ml

????????

Wyandotte Dispenser MANUAL Dosage per stroke: Spray – 0.25 ml Lotion/Soap – 1 ml or 2 ml Foam – 0.25, 0.7 or 1 ml Standard Bottles: 1,000 ml/ 34 oz, HDPE bottle, bags or soft bottle

White 1000 ml

????????

SPRAY Dispenser Pump. Fits both dispenser styles (manual & touch-free) Dosage per stroke: .25 ml

Pink .25 ml

????????

FOAM Dispenser Pump. Fits both dispenser styles (manual & touch-free) Dosage per stroke: .25 to 1 ml

Green .25 to 1 ml

????????

SOAP / Lotion Dispenser Pump. Fits both dispenser styles (manual & touch-free) Dosage per stroke: 1 to 2 ml

Purple 1 to 2 ml


1 Gallon Stainless Steel Manual Dispenser | Soap & Spray Pumps Available

Part Number Description Color Capacity Photo Notes

AF083000

Heavy Duty Sanitary Design Hands Free Soap or Sanitizer Dispenser Wrist-Activated, No-Touch Stainless Steel construction for durability One gallon capacity for atomized sanitizer or soap

Stainless Steel

1 Gallon

AF090901

Replacement Sanitizer Pump For Sanitizer Hands Free Dispensers NOTE: Style or brand may vary!

White 1 Gallon

AF090902

Replacement Soap Pump For Soap Hands Free

Dispensers NOTE: Style or brand may vary!

White 1 Gallon


3M Scotch Brite™ Scrub Pads

Part Number Model Description Picture Notes / Case

AF091100

Heavy Duty Industrial

M 86

1 case/36 pcs

Open construction pad with tough fibers and abrasives make fast

work of heavy duty cleaning jobs. Use in the kitchen to replace

scrapers, steel wool and metal sponges. Typical applications

include heavily baked-on food and food processing equipment.

AF091101

General Purpose

M 96

1 case/60 pcs

It’s the original synthetic scouring pad and a performance pacesetter.

Use it for everyday cleaning of most cooking utensils and

equipment. It replaces steel wool and metal sponges and won’t leave metal slivers in hands or food. Non-rusting and resilient.


Conveyor Lubrication Systems – Dry Lube

AFCO Inteli-Glide Feed System

Dry Lubrication Program … new technology fully synthetic chain lubricant, specifically designed for the use on plastic and metal conveyors, for the transportation of product packages in the food & beverage industry, where a water-free operation is desired. pH neutral for a wide variety of applications including Tetra Pak®, SIG Combibloc®, PET bottles, etc..

Part Number Model Description # Lines Dimensions Power Notes

AF08SMTFEED TMSF-1 InteliGlide Controller Up to 4 Lines

16” H x 14” W x 8” D 110 V

AFCO Inteli-Glide Feed System II Dry Lubrication Program … new technology fully synthetic chain lubricant, specifically designed for the use on plastic and metal conveyors, for the transportation of product packages in the food & beverage industry, where a water-free operation is desired. pH neutral for a wide variety of applications including Tetra Pak®, SIG Combibloc®, PET bottles, etc..

Part Number Model Description # Lines Dimensions Power Notes

AF08SMTFEED-2 TMSF-2 Smart Feed II

Controller 1 Line 12” H x 10” W x 8” D 110 V

Dry Lube Spray Nozzles & Tubing


AF011001 SS Nozzle Bracket … 10”

AF07SMTFD111B Nozzle Assembly Complete – w/ tip & 10“ bracket

AF07SMTFDN022 InteliGlide Nozzle Only

AF02N0296 InteliGlide Nozzle Tip Only

AF022407 InteliGlide Tubing 1/4” OD

AF022409 InteliGlide Tubing 3/8” OD

AF031900 Replacement Pump

AF053413 Replacement Solenoid


Conveyor Lubrication Systems – Wet Lube

Dosatron Water Based Lubrication Systems The Dosatron Lube injectors can dispense a wide range of concentrations at many volume / pressure configurations. Its wide injection ratio range makes it a popular unit for many wet lube applications.

Part Number

Model

Ratio

Pipe Size

Pressure PSI

GPM

%

Photo

Notes

AF031214 DI-14 1:500 – 1:50 ¾” 4.3 - 85 .05 - 14 .2 – 2.0

AF031200 DI-150 1:100 – 1:20 ¾” 4.3 - 85 .05 - 11 1.0 – 5.0

Dosmatic Water Based Lubrication Systems Water Flow Driven| Metering Lube Injectors

Non-electric, water-driven

Corrosion resistant

Proportional

Accurate dosage rates

Externally adjustable

Economical

Easy to use and maintain

Reliable

Part Number

Model

Ratio

Pipe Size

Pressure PSI

GPM

%

Photo

Notes

AF031216 A12 (2.5%) 1:200 – 1:40 ¾” 6 - 100 .03 - 12 2.5

AF031215 SUPERDOS 30 (2.5%)

1:500 – 1:40 1” 5 - 100 .15 - 30 2.5



AFCO Lube Nozzles & Parts

PVC Nozzle(s) & Tubing


AF02NO223 Nozzle Assembly (Complete)

AF011000 6” Stainless Steel Bracket

AF022672 PVC Nozzle Valve

AF02N0004 PVC Tip Assembly

AF02N0260 SS Nozzle

ASPIRJET Brass Nozzle(s) & Tubing


AF0811014 ASPIRJET Nozzle Assembly (Complete)

AF011000 1” x 6” Stainless Steel Strap (Bracket)

AF020300 ASPIRJET Block

AF02N008 Nozzle

AF02N0250 Nozzle

AF020501 Nozzle Cap

AF021718 Brass Reducer

AF010603 ¼” Brass Plug

AF020707 ¼” MPT x ¼” Brass 90º Elbow

AF020753 ¼” MPT x 3/8” Brass Elbow

Common Parts


AF010705 #8 32 x ¼” Stainless Steel Sheet Metal Screw

AF010915 #8 Stainless Steel Lock Washer

AF010510 #8-32 SS Nut Stainless Steel

AF022407 Tubing 1/4” OD

AF022409 Tubing 3/8” OD

AFCO PureFlo Lube Nozzles on Page 61



AFCO Lube Nozzles & Parts - Continued

AFCO PureFlo Nozzle & Tubing


???????? Nozzle Assembly (Complete)

AF011000 6” Stainless Steel Bracket

AF022672 PVC Nozzle Valve

???????? PVC Tubing

???????? Pure Flo Nozzle


Conveyor Lubrication Systems - Overhead

AFCO Overhead Conveyor Brush

Effective against “Rail Dust” & “Black Grease” Add AFCO 5249 & 5377 (see below) Fits standard “I” beam Heavy Duty construction Easy replacement of parts

NOTE: Call 1-800-346-1329 for proper cleaning & lubing procedures


AF081CB100 - Rail Brush Assembly Complete

AF041003 - Replacement Brush Sections BLACK sections below (4 per brush – 16 total)

AF041000 - Replacement Body – RED section below (no brushes)

AF041001 - Replacement Shaft – BLUE section below (1 Pair)

5249 5 gal pail Cleaning / Degreasing Cleaning Solution

5377 5 gal pail Rail Magic Lubricant

Replacement Shaft Part Number AF041001

Replacement Body Part Number AF041000

Replacement Brush 4 per section

Part Number AF041003


Conveyor Lubrication Systems - Overhead

AFCO Inside Chain Spray Header

Fits standard “I” beam Heavy Duty construction Easy operation

NOTE: Call 1-800-346-1329 for proper cleaning & lubing procedure.


AF0810TW100 Inside Chain Washer / Lube Header – Complete

AF022616 ¼” Check Strainer, Brass

AFCO Outside Chain Spray Header

Fits standard “I” beam Heavy Duty construction Easy operation

NOTE: Call 1-800-346-1329 for proper cleaning & lubing procedure.


AF080TW100 Outside Chain Washer / Lube Header – Complete

AF022616 ¼” Check Strainer, Brass

Cleaning & Lubing Program (Products)

Product Code Unit Recommended Use Notes

5249 5 gal pail Rail & Shackle Degreaser

5733 5 gal pail Rail Magic – Rail Cleaner / Lube

AFCO Air Atomizing Adjustable Lube Header Designed for any overhead conveyor system requiring a fine / controlled mist of

lubricant.

Stainless Steel Construction Vertical and Horizontal Nozzle Positioning Stainless Steel Jug Holder with 2.5 gal Chemical Container


AF093007 Air Atomizing Lube Header - Complete

AF02N0017 Replacement Air Atomizing Nozzle (for AF093007)


Sanitary Process Supplies – Hoses, Hose Reels & Racks

Hoses, Hose Racks & Reels


AF-HRRLSREEL001 HR 100 SS Stainless Steel Hose Reel. NOTE: 25’ & 50’ max length

AF-HRRLCREEL001 HR 100 CS Carbon Steel Hose Reel. NOTE: 25’ & 50’ max length

AF-WSRLHREEL001 HR 100 H Hygienic Hose Reel. NOTE:

25’ & 50’ max length

AF-A-XR25

RED

5/8” ID Premium Wrapped Hose ¾” MPT x 5/8” swivel adapter (nozzle sold separate) Length: 25’, 50’, 75’ and 100’

AF-A-XR50

AF-A-XR75

AF-A-XR100

AF-A-XW25

WHITE


AF-A-XW50

AF-A-XW75

AF-A-XW100

AF-A-XB25

BLACK


AF-A-XB50

AF-A-XB75

AF-A-XB100

AF-A-XY25

YELLOW


AF-A-XY50

AF-A-XY75

AF-A-XY100


Sanitary Process Supplies – Hoses, Hose Reels & Racks

Spray Guns Many of our customers have said Strahman spray nozzles are the best on the market. That’s because at Strahman, we combine modern and innovative engineering with premium quality parts to build hose nozzles strong enough to withstand even the most rugged applications. All of Strahman’s spray nozzles are available in black, white or red, and are available made in bronze or stainless steel. Special assembly for food grade is also available.

Strahman’s nozzles work best under these standards:

Maximum recommended operating temperature: 200°F/93°C

Maximum working pressure: 150 psi

Flow rates: 5-7 gpm under normal conditions (50-80 psi)/10 gpm max at 150 psi

This rubber-coated, precision-made nozzle enables the operator to achieve any type of stream of water – from a soft spray to a

strong, straight stream – simply by pressing the lever. This convenient control of the wash water assures better cleaning with less effort. The Automatic Water Saver Spray Nozzle automatically shuts off when the lever is released, thereby conserving water or reducing water consumption.


AF-M70B M 70 Black M70 … Bronze / S70 … Stainless Steel

HD Water Nozzle Swivel (Black) 200ºF | 150 PSI | 5-7 GPM @ 50-80 PSI Connections available: ½” | 5/8” | ¾”

AF-S70B S 70 Black

AF-M75W M 75 White M75 … Bronze / S75 … Stainless Steel

HD Water Nozzle Swivel (White) 200ºF | 150 PSI | 5-7 GPM @ 50-80 PSI Connections available: ½” | 5/8” | ¾”

AF-S75W S 75 White

AF-M77R M 77 Red M77 … Bronze / S77 … Stainless Steel

HD Water Nozzle Swivel (Red) 200ºF | 150 PSI | 5-7 GPM @ 50-80 PSI Connections available: ½” | 5/8” | ¾”

AF-S77R S 77 Red

AF-M70MINI Mini M 70 Black

The Mini M-70 weighs only 1.8 lbs and provides the same high quality as

premium heavy-duty M-70 models.

AF-M75MINI Mini M 75 White

The Mini M-70 weighs only 1.8 lbs and provides the same high quality as

premium heavy-duty M-70 models.


Sanitary Process Supplies – Brushes

Color Coded Floor Sweep Brushes

Color-coded bristle floor sweep with patent-pending design Unique sweep that combines the features of fine, medium, and heavy floor

sweeps into one convenient, all purpose floor sweep Hygienic plastic block is non-absorbent Synthetic bristles have angled pitch for fast, effective sweeping on all types

of floor surfaces Short, heavy bristles in front easily sweeps up heavy debris Long, fine/medium bristles in back sweep fine dust and particles; can be

used with sweeping compounds Ideal addition to any HACCP compliant program; use with Color-Coded Self-Locking Fiberglass Handle, sold separately Base resins used to produce blocks and bristles are made of FDA approved materials

Part Number Model Description Color Width Notes

AF4189114 Omni Sweep® Floor Brush BLUE 24”

AF4189109 Omni Sweep® Floor Brush GREEN 24”

AF4189105 Omni Sweep® Floor Brush RED 24”

AF4189102 Omni Sweep® Floor Brush WHITE 24”

AF4189104 Omni Sweep® Floor Brush YELLOW 24”

Color Coded Squeegee

All plastic construction will not rust, safe to use on delicate tile and

marble floors, helps prevent hazardous sparks when cleaning-up flammable fluids; great on uneven floor surfaces

Use standard threaded handles for a secure fit Available in 5 HACCP friendly colors to help prevent cross contamination


AF36567-14 Spectrum Solid, One-Piece Squeegee BLUE 20”

AF36567-09 Spectrum Solid, One-Piece Squeegee GREEN 20”

AF36567-05 Spectrum Solid, One-Piece Squeegee RED 20”

AF36567-02 Spectrum Solid, One-Piece Squeegee WHITE 20”

AF36567-04 Spectrum Solid, One-Piece Squeegee YELLOW 20”



Color Coded Brushes

versatile design for a wide variety of applications multiple trim angles on bristles give you better surface contact for better

cleaning available with pistol grips in our most popular 8" or 20" handle lengths plastic handles and crimped staple set Polyester bristles are rugged and will

not absorb oils or moisture handles are ergonomically shaped, with smooth edges for superior comfort base resins used to produce blocks and bristles are made of FDA approved

materials

Part Number Model Description Color Size Notes

AF40541-03 H8 8" Utility Scrub w/Polyester Bristles BLACK 8”

AF40541-14 H8 8" Utility Scrub w/Polyester Bristles BLUE 8”

AF40541-01 H8 8" Utility Scrub w/Polyester Bristles BROWN 8”

AF40541-09 H8 8" Utility Scrub w/Polyester Bristles GREEN 8”

AF40541-05 H8 8" Utility Scrub w/Polyester Bristles RED 8”

AF40541-25 H8 8" Utility Scrub w/Polyester Bristles TAN 8”

AF40541-02 H8 8" Utility Scrub w/Polyester Bristles WHITE 8”

AF40541-04 H8 8" Utility Scrub w/Polyester Bristles YELLOW 8”

AF40501-03 H20 20" Utility Scrub w/Polyester Bristles BLACK 20”

AF40501-14 H20 20" Utility Scrub w/Polyester Bristles BLUE 20”

AF40501-01 H20 20" Utility Scrub w/Polyester Bristles BROWN 20”

AF40501-09 H20 20" Utility Scrub w/Polyester Bristles GREEN 20”

AF40501-05 H20 20" Utility Scrub w/Polyester Bristles RED 20”

AF40501-25 H20 20" Utility Scrub w/Polyester Bristles TAN 20”

AF40501-02 H20 20" Utility Scrub w/Polyester Bristles WHITE 20”

AF40501-04 H20 20" Utility Scrub w/Polyester Bristles YELLOW 20”

Color Coded Hand Scrub Brushes

stiff Polyester bristles staple set into comfortable, easy grip handle styles all of our hand scrub styles reach into tight crevices and corners each has a plastic block; won’t crack or splinter 40024 is our popular Iron Handle Style; 45494 is our Pointed End Style 41395 and 41396 are our Multi Purpose Utility Style base resins used to produce blocks and bristles are made of FDA approved materials

Part Number Model Description Color Size Notes

AF4002414 - 8" Pointed End Scrub w/Polyester Bristles BLUE 8”

AF4002409 - 8" Pointed End Scrub w/Polyester Bristles GREEN 8”

AF4002405 - 8" Pointed End Scrub w/Polyester Bristles RED 8”

AF4002402 - 8" Pointed End Scrub w/Polyester Bristles WHITE 8”

4002404 - 8" Pointed End Scrub w/Polyester Bristles YELLOW 8”



Color Coded Tank & Kettle Brush

Flare head design assures all-around thorough cleaning and can be used with different length threaded handles to reach bottom of kettles and tanks

Crimped bristles are staple set into solid plastic head Nylon bristle brushes (40040, 40042, 41220) have excellent chemical

resistance Base resins used to produce bristles are made of FDA approved materials Threaded handle hole; 40225 Sparta® Spectrum® Self-Locking Flex-Tip® Handle is recommended to complete HACCP compliant program

Part Number Model Description Color Length Width Notes

AF4004303 Spectrum Flare Head Brush w/Polyester Bristles BLACK 7 ½” 5 ½”

AF4004314 Spectrum Flare Head Brush w/Polyester Bristles BLUE 7 ½” 5 ½”

AF4004301 Spectrum Flare Head Brush w/Polyester Bristles BROWN 7 ½” 5 ½”

AF4004309 Spectrum Flare Head Brush w/Polyester Bristles GREEN 7 ½” 5 ½”

AF4004305 Spectrum Flare Head Brush w/Polyester Bristles RED 7 ½” 5 ½”

AF4004325 Spectrum Flare Head Brush w/Polyester Bristles TAN 7 ½” 5 ½”

AF4004302 Spectrum Flare Head Brush w/Polyester Bristles WHITE 7 ½” 5 ½”

AF4004304 Spectrum Flare Head Brush w/Polyester Bristles YELLOW 7 ½” 5 ½”

Color Coded CIP (Clean-In-Place) Scrub Brush

CIP (Clean–In-Place) Brushes are ideal for cleaning curved drains, tubes, pipes, and equipment

Polyester bristles are twisted into galvanized wire Hook or circular shape brush for cleaning pipes in place Self-Locking Flex-Tip™ Fiberglass Handle, sold separately

Base resins used to produce bristles are made of FDA approved materials


AF4110014 Spectrum CIP Hook Brush BLUE 11 ½” -

AF4110001 Spectrum CIP Hook Brush BROWN 11 ½” -

AF4110009 Spectrum CIP Hook Brush GREEN 11 ½” -

AF4110005 Spectrum CIP Hook Brush RED 11 ½” -

AF4110002 Spectrum CIP Hook Brush WHITE 11 ½” -

AF4110025 Spectrum CIP Hook Brush TAN 11 ½” -

AF4110004 Spectrum CIP Hook Brush YELLOW 11 ½” -


Sanitary Process Supplies – Handles

Color Coded Handles

For use with Spectrum® push brooms, sweeps, squeegees, and floor scrubs 1" diameter fiberglass handles are available in threaded, tapered/threaded, telescoping, and

mop styles Self-Locking Flex-Tip™ Handle offers greater flexibility and reduces handle stress Available in up to 7 HACCP compliant colors

Part Number Model Description Color Diameter Length Notes

AF4102014 Spectrum Telescoping Fiberglass Handle BLUE 1” 8’

AF4102001 Spectrum Telescoping Fiberglass Handle BROWN 1” 8’

AF4102009 Spectrum Telescoping Fiberglass Handle GREEN 1” 8’

AF4102005 Spectrum Telescoping Fiberglass Handle RED 1” 8’

AF4102025 Spectrum Telescoping Fiberglass Handle TAN 1” 8’

AF4102002 Spectrum Telescoping Fiberglass Handle WHITE 1” 8’

AF4102004 Spectrum Telescoping Fiberglass Handle YELLOW 1” 8’

Scrub Pad Holder

Made of high impact plastic and hold pads in place without any screws or metal fasteners.

Pictured with 1” Fine Nylon Scrub Pad (not-included / sold separate)


AF36538014 - Pad Holder / Handle Style - 9 ¼”

Scrub Pads

Fine to coarse, “Super Size” scrub pads tackle typical cleaning applications in food preparation or processing equipment, baseboards, floor edges, underneath fixtures, ceramic tile, and swimming pools.


AF4072411 4 Pack 1" Nylon Fine Scrub Pad FINE 10” 4 5/8”

AF4072400 4 Pack 1" Nylon Medium Scrub Pad MEDIUM 10” 4 5/8”

AF4120400 4 Pack 1" Nylon Coarse Scrub Pad COARSE 10” 4 5/8”



Heavy Duty Pipe Brush

Specifically designed to clean inside tubes and pipes Heavy duty brushes in 3' up to 12' lengths Medium stiff Polyester bristles are twisted in 8 gauge wire with a 5" brush part Base resins used to produce bristles are made of FDA approved materials

Part Number Model Description Diameter Length Notes

AF4114000 1 ½” 3’ HD Pipe Brush 1 ½” 3’

AF4114200 1 ½” 6’ HD Pipe Brush 1 ½” 6’

AF4114700 2” 4’ HD Pipe Brush 2” 4’

AF4115800 3” 3’ HD Pipe Brush 3” 3’

AF4115900 3” 4’ HD Pipe Brush 3” 4’

AF4116400 3” 6’ HD Pipe Brush 3” 6’

AF4116200 3” 10’ HD Pipe Brush 3” 10’

SS Pipe Brush Wire Handle

HD 8 gauge wire handle for powder bag brush.

Part Number Model Description Gauge Length Notes

AF4123600 1 ½” SS Wire Handle 8 4’

AF4121400 1 ½” SS Wire Handle 8 6’

AF4104400 2” SS Wire Handle 8 8’

AF4121800 3” SS Wire Handle 8 10’

Soft Brisle Pipe Brush Head (only)

Made of soft, White Nylon bristles twisted in wire to reach into folds and gently dislodge powder; standard 1/4" threaded nipple

Base resins used to produce bristles are made of FDA approved materials

Part Number Model Description Diameter Length Notes

AF41251 56 Soft Brisle Pipe Brush (head only) 5” 6”




Sanitary Process Supplies – Food Grade Lubricants

Food Grade Lubricants & Greases

Part Number Model Description Picture Notes

AF8085 #10 CIP Film

Long term lubricating grease

AF8452 #20 Haynes 500

High temperature white grease

AF8473 #30 Homogenizer Oil

AF8288 #50 Haynes Spray

Light duty oil – Red can

AF8110 #60 Lubri-Film Spray

Heavy duty lubricating spray

AF8051 #61 Lubri-Film Tubes

Heavy duty lubricating grease

AF8472 #70 Lubri-Film Cartridges

Heavy duty lubricating grease

AF8077 #80 Lubri-Film Plus

Extended performance grease

AF8474 #100 Silicone Spray

Sanitary Spray Lubricant


ORDER FORM

SOLD TO SHIP TO … If different than “Sold To” Customer Number

Company Name

P.O. Number

Contact / Title

Company Name

Street Address

Buyer’s Name

City / State / Zip

Street Address

City / State / Zip

ORDERS

Phone

PHONE

800.345.1329 Fax

FAX

717.265.9182 Valid e-Mail

WEBSITE

www.afcocare.com

ORDER INFORMATION

QTY PART NUMBER CATALOG PAGE NUMBER & DESCRIPTION UNIT TOTALS

Dollars Cents

WE WILL SHIP PRE-PAID AND INVOICE YOU FOR THE CHARGES HOURS:

MONDAY through FRIDAY | 8:00 AM to 4:00 PM ET Place your order 24 / 7 at www.afcocare.com

SUBTOTAL

TAX*

TOTAL

* Add 8% Sales Tax for: PA

METHOD OF PAYMENT

AFCO Account / PO - Check Enclosed - VISA - MASTERCARD - AMEX -

DISCOVER -

CARD NUMBER: EXP DATE: CVC CODE:

SIGNATURE:

MAKE CHECKS PAYABLE TO: Alex C. Fergusson LLC | AFCO

AFCO Equipment & Engineering | 800.345 · AFCO Equipment & Engineering | 800.345.1329 Page 9...

Documents

Transcript of AFCO Equipment & Engineering | 800.345 · AFCO Equipment & Engineering | 800.345.1329 Page 9...