Aerodrome Manual - Gatwick Airport€¦ · Gatwick Airport Ltd Airside Operations Building 2B169...
Transcript of Aerodrome Manual - Gatwick Airport€¦ · Gatwick Airport Ltd Airside Operations Building 2B169...
Aerodrome Manual
20140701GatwickAeroManv5.0
1
Department
Airside Compliance
Document Owner
Jerry Barkley
Document Administrator
Janet Gilroy
Address
Gatwick Airport Ltd Airside Operations Building 2B169 Gatwick Airport West Sussex RH6 0NP
Tel
07799 478376
Website
business.gatwickairport.com
20140701GatwickAeroManv5.0
2
The Aerodrome Manual consists of 5 parts, as follows:-
Part A - General
Part B - Aerodrome Management System, qualification and training requirements
Part C - Particulars of the aerodrome site
Part D - Particulars of the aerodrome required to be reported to the Aeronautical Information Service
Part E - Particulars of the operating procedures of the aerodrome, its equipment and safety measures
20140701GatwickAeroManv5.0
3
CONTENTS
Part A – General Page
0. Administration and Control of the Aerodrome Manual 6
0.1 Introduction 6
0.2 System of Amendment and Revision 10
1. General Information 14
Part B – Aerodrome Management System, qualification and training requirements 2. Aerodrome Management System, Qualification and Training 17
Requirements
2.1 Aerodrome Organisation and Responsibilities 17
2.2 Safety Management System
2.3 Compliance Monitoring 63
2.4 Quality Management system for Aeronautical Data and 70 Information Provision
2.5 Accident and Mandatory Reporting Policies 71
2.6 Procedures related to alcohol / drugs 84
2.7 Safety Directives/ Problems / Recommendations 85
2.8 Procedures for Recording Aircraft Movements 86
3. Required Aerodrome Personnel Qualifications / Training 86
3.1 Training Programme 86
3.2 Proficiency Check Programme 88
3.3 Provision of Training and Proficiency Check Records to New Employer 88
Part C - Particulars of the aerodrome site
4. Description of Aerodrome Site 90
Part D - Particulars of the aerodrome required to be reported to the Aeronautical Information Service
5. Procedures for the Promulgation of General Information 94 6. Aerodrome Dimensions and Related Information 95
20140701GatwickAeroManv5.0
4
Part E – Particulars of the operating procedures of the aerodrome, its equipment and safety measures Page
7. Aerodrome Reporting 104
8. Procedures for Accessing the Aerodrome Movement Area 105
9. Inspection, Assessment and Reporting of Airside Areas 106
10. Inspection and Maintenance of Visual and Non-Visual Aids 114
11. Inspection and Maintenance Procedures for Aerodrome Equipment 115
12. Maintenance of the Movement Area 115
13. Aerodrome Works 118
14. Procedures for Apron Management 119
15. Procedures for Apron Safety Management 120
16. Vehicle Control on Operational Areas 122
17. Wildlife Hazard Management 122
18. Obstacle Control and Safeguarding 124
19. Aerodrome Emergency Planning 125
20. Rescue and Firefighting 126
21. Aircraft Recovery 140
22. Aviation Fuel Management and Dangerous Goods 140
23. Low Visibility Operations 141
24. Procedures for Winter Operations 142
25. Strong Wind Warnings 142
26. Night Operations 142
27. Protection of Radar and other Navigational Aids 142
28. Procedures for Operation of Aircraft with Higher Code Letter 143
29. Prevention of Fire at the Aerodrome 143
30. Procedure for Calculating Reduced Declared Distances 144
31. Isolated aircraft parking position 144
32. List of Attachments and Available Supporting Information 145
33. Deviation and Action Document 146
20140701GatwickAeroManv5.0
5
Part A
General
20140701GatwickAeroManv5.0
6
20140701GatwickAeroManv5.0
7
0.1.3 Parts of the Aerodrome Manual
Part A General information, administration and control of the aerodrome manual. Part B Aerodrome management system, qualification and training requirements. Part C Particulars of the Aerodrome Site Part D
Particulars of the Aerodrome required to be reported to the Aeronautical Information Service.
Part E Particulars of the Operating Procedures of the Aerodrome, its Equipment and Safety Measures.
0.1.4 Definition of Terms needed for the Use of the Aerodrome Manual
Aerodrome Any area of land or water designed, equipped, set apart or commonly used to afford facilities for the landing and departure of aircraft and includes any area or space, whether on the ground, on the roof of a building or elsewhere, which is designed, equipped or set apart to afford facilities for the landing and departure of aircraft capable of descending or climbing vertically, but shall not include any area the use of which for affording facilities for the landing and departure of aircraft has been abandoned and has not been resumed.
Aerodrome Elevation The elevation of the highest point of the landing area. Aerodrome Reference Point The aerodrome reference point is the geographical location of the aerodrome and the centre of its traffic zone where an ATZ is established.
Aeronautical Ground Lighting (AGL) Approach, runway and taxiway lighting provided for the guidance of
aircraft at night and in low visibility. Apron A defined area on a land aerodrome provided for the stationing of aircraft for the embarkation and disembarkation of passengers, the loading and unloading of cargo and for parking. Category 1 (CAT 1) Operation A precision Instrument Approach and Landing with a decisions height not lower than 200 feet and with either a visibility not less than 800m, or runway visual range (IRVR) not less than 550m. Category ll (CAT ll) Operation A precision instrument approach and landing with a decision height lower than 200ft but not lower than 100ft., and a runway visual range not less than 300m.
Category lllA (CAT lllA) Operation A precision instrument approach and landing with either, a decision height lower than 100ft,or with no decision height and a runway visual range not less than 175m.
20140701GatwickAeroManv5.0
8
Category lllB (CAT lllB) Operation A precision instrument approach and landing with either, a decision height lower than 50ft or with no decision height and a runway visual range less than 175m but not less than 50m.
Cleared and Graded Area An area within a runway strip free from obstacles. Clearway An area at the end of the take-off run available and under the control of the aerodrome licensee, selected or prepared as a suitable area over which an aircraft may make a portion of its initial climb to a specified height. GAD - Gatwick Airport Directive A Directive setting out airside policy and procedures. GAL – Gatwick Airport Ltd Aerodrome operator. GAN – General Advice Notice A Notice issued to advise short term revisions to airside procedures and / or infrastructure.
Instrument Approach Runway A runway intended for the operation of aircraft using non-visual aids providing at least directional guidance in azimuth adequate for a straight-in approach. Instrument Strip An area of specified dimensions, which encloses an instrument runway. Inter-Stand Clearway A corridor of apron between two stands, marked by paint markings intended to be kept clear so as to facilitate vehicle movement from the front to the back of a parked aircraft and to enable emergency access / egress.
Manoeuvring Area That part of an aerodrome provided for the take-off and landing of aircraft and for the movement of aircraft on the surface, excluding the apron and any part of the aerodrome provided for the maintenance of aircraft. MARS (Multi Aircraft Ramp System) A MARS stand is defined as one which allows either two small aircraft or one large aircraft to be parked on the same stand. MCA (Multi Choice Apron) An MCA stand can accept more complex combinations of aircraft than a MARS stand, ie. three small aircraft or two large aircraft.
Movement Area That part of an aerodrome intended for the surface movement of aircraft including the manoeuvring area, aprons and any part of the aerodrome provided for the maintenance of aircraft.
Non-Instrument Runway A runway intended for the operation of aircraft using visual approach procedures.
Obstacle All fixed (whether temporary or permanent) and mobile objects, or parts thereof, that are located on an area intended for the surface movement of
20140701GatwickAeroManv5.0
9
aircraft or that extend above a defined surface intended to protect aircraft in flight. Obstacle Free Zone A volume of airspace extending upwards and outwards from an inner portion of the strip to specified upper limits which is kept clear of all obstructions except for minor specified items.
Precision Approach Runway A runway intended for the operation of aircraft using visual and non-visual aids providing guidance in both pitch and azimuth adequate for a straight-in approach. See Category I, II and III Operations.
Rapid Exit Taxiway (RET) A taxiway connected to a runway at an acute angle and designed to allow landing aeroplanes to turn off at higher speeds than are achieved on other exit taxiways thereby minimising runway occupancy times. RETILS Rapid Exit Taxiway Indicator Lights (RETILs) and paint markings assist pilots in judging distances to Rapid Exit Taxiways and enable them to apply braking action for a more efficient roll-out and runway exit speed. The RETILs provide a 3-2-1 countdown pattern of amber lights together with 3 sets of painted count-down markings placed at 300 m, 200 m and 100 m from the intersection of the runway centre-line with the Rapid Exit Taxiway centre-line. Installed on runway 08R/26L. RGB Runway Guard Bars are installed at all runway/taxiway intersections and consist of light fittings spaced at intervals of no greater than 3m across the taxiway showing red towards the direction of approach to the runway, normally at right-angles to the taxiway centreline RTILS Runway threshold identification lights - 2 synchronised flashing white lights, one at each end of the threshold bar. Installed on runway 08L/26R.
Runway A defined rectangular area, on a land aerodrome prepared for the landing and take-off run of aircraft along its length. Runway End Safety Area (RESA) An area symmetrical about the extended runway centreline and adjacent to the end of the strip primarily intended to reduce the risk of damage to an aeroplane undershooting or overrunning the runway. Shoulder An area adjacent to the edge of a paved surface so prepared as to provide a transition between the pavement and the adjacent surface for aircraft running off the pavement. Stopway A defined rectangular area at the end of the take-off run available, prepared and designated as a suitable area in which an aircraft can be stopped in the case of a discontinued take-off.
Strip An area of specified dimensions enclosing a runway and taxiway to provide for the safety of aircraft operations.
20140701GatwickAeroManv5.0
10
Taxiway A defined path, usually paved, on a land aerodrome established for the taxiing of aircraft and intended to provide a link between one part of the aerodrome and another, including: a) Aircraft Stand Taxi lane - a portion of an apron designated as a taxiway
and intended to provide access to aircraft stands only (i.e. in a cul-de-sac).
b) Apron Taxiway - a portion of a taxiway system located on an apron and intended to provide a through taxi route across the apron.
Taxiway Holding Position A designated position at which taxiing aircraft and vehicles may be required to hold in order to provide adequate clearance from a runway. Taxiway Intersection A junction of two more taxiways. Threshold The beginning of that portion of the runway usable for landing. TODA Signs Take-off distance available signs, used on runway 08L/26R. TUBS Taxiway Unavailable Bars (TUBS) comprising of a line of red stop lights spaced at approximately 3m centres across the full width of the mouth of each RET/RAT adjacent to the runway and running parallel to the runway centre-line, to prevent incursions onto taxiways which are unavailable due to operational issues such as Work in Progress. For use when runway 08R/26L is in operation.
0.2 System of Amendment and Revision
0.2.1 Person responsible for issuance and insertion of amendments and
revisions
The Head of Airside Compliance is responsible for the issue and insertion of amendments and revisions.
The Aerodrome Manual is reviewed by the Head of Airside Compliance on a quarterly basis. It is a ‘live document’ in the sense that it is maintained as a single entity incorporating all up to date information. Any amendments will trigger a re-issue of the entire document as a new version. When this happens an advisory email message will be sent to the distribution addressees, informing that the Aerodrome Manual has received an update, with a new version number. Recipients are required to confirm by e-mail to the Head of Airside Compliance, that they have received the amended Aerodrome Manual.
20140701GatwickAeroManv5.0
11
0.2.2 Record of amendments and revisions
Amendment No.
Effective Date
Insertion Date
Initials
1
01/03/16
2
09/06/17
3
03/04/18
4
25/01/19
0.2.3 Handwritten amendments and revisions
Handwritten amendments and revisions are not permitted.
In situations requiring immediate amendment or revision in the interest of safety, GAL will inform the airside operators by means of the regulated promulgation of information or where appropriate issue Directives and Notices.
0.2.4 Annotation of pages
Each page will be annotated with a header – example below 20140701GatwickAeroManv1.0
20140701GatwickAeroManv5.0
12
0.2.5 List of effective pages
Section Page Date Section Page Date Section Page Date
Contents 3 25/01/19 Part B 50 03/04/18 Part D 97 09/06/17
Contents 4 25/01/19 Part B 51 03/04/18 Part D 98 09/06/17
Part A 5 01/07/14 Part B 52 03/04/18 Part D 99 01/07/14
Part A 6 01/07/14 Part B 53 25/01/19 Part D 100 09/06/17 Part A 7 01/07/14 Part B 54 03/04/18 Part D 101 01/07/14
Part A 8 01/03/16 Part B 55 03/04/18 Part D 102 09/06/17 Part A 9 01/07/14 Part B 56 25/01/19 Part E 103 01/03/16
Part A 10 01/03/16 Part B 57 09/06/17 Part E 104 09/06/17
Part A 11 25/01/19 Part B 58 09/06/17 Part E 105 25/01/19
Part A 12 25/01/19 Part B 59 25/01/19 Part E 106 09/06/17
Part A 13 25/01/19 Part B 60 01/03/16 Part E 107 01/03/16
Part A 14 25/01/19 Part B 61 03/04/18 Part E 108 25/01/19
Part A 15 03/04/18 Part B 62 01/07/14 Part E 109 09/06/17
Part B 16 09/06/17 Part B 63 03/04/18 Part E 110 09/06/17
Part B 17 09/06/17 Part B 64 03/04/18 Part E 111 09/06/17
Part B 18 03/04/18 Part B 65 25/01/19 Part E 112 25/01/19 Part B 19 01/03/16 Part B 66 03/04/18 Part E 113 25/01/19 Part B 20 25/01/19 Part B 67 25/01/19 Part E 114 03/04/18 Part B 21 25/01/19 Part B 68 03/04/18 Part E 115 01/03/16 Part B 22 25/01/19 Part B 69 25/01/19 Part E 116 01/03/16 Part B 23 25/01/19 Part B 70 25/01/19 Part E 117 01/03/16 Part B 24 09/06/17 Part B 71 03/04/18 Part E 118 09/06/17
Part B 25 03/04/18 Part B 72 03/04/18 Part E 119 01/03/16
Part B 26 25/01/19 Part B 73 03/04/18 Part E 120 01/03/16
Part B 27 03/04/18 Part B 74 09/06/17 Part E 121 01/03/16
Part B 28 25/01/19 Part B 75 09/06/17 Part E 122 01/03/16
Part B 29 25/01/19 Part B 76 09/06/17 Part E 123 03/04/18
Part B 30 25/01/19 Part B 77 09/06/17 Part E 124 25/01/19
Part B 31 03/04/18 Part B 78 09/06/17 Part E 125 01/03/16
Part B 32 03/04/18 Part B 79 01/07/14 Part E 125 01/03/16
Part B 33 03/04/18 Part B 80 01/03/16 Part E 127 25/01/19
Part B 34 03/04/18 Part B 81 01/03/16 Part E 128 25/01/19
Part B 35 03/04/18 Part B 82 01/07/14 Part E 129 03/04/18
Part B 36 03/04/18 Part B 83 01/07/14 Part E 130 25/01/19
Part B 37 03/04/18 Part B 84 01/03/16 Part E 131 01/03/16
Part B 38 03/04/18 Part B 85 01/07/14 Part E 132 01/03/16
Part B 39 03/04/18 Part B 86 25/01/19 Part E 133 25/01/19
Part B 40 03/04/18 Part B 87 03/04/18 Part E 134 25/01/19
Part B 41 03/04/18 Part B 88 03/04/18 Part E 135 01/03/16
Part B 42 03/04/18 Part C 89 09/06/17 Part E 136 01/03/16
Part B 43 03/04/18 Part C 90 25/01/19 Part E 137 03/04/18
Part B 44 03/04/18 Part C 91 01/07/14 Part E 138 01/03/16
Part B 45 03/04/18 Part C 92 01/03/16 Part E 139 03/04/18
Part B 46 03/04/18 Part D 93 01/07/14 Part E 140 01/03/16
Part B 47 03/04/18 Part D 94 25/01/19 Part E 141 03/04/18
Part B 48 03/04/18 Part D 95 09/06/17 Part E 142 01/03/16
Part B 49 03/04/18 Part D 96 25/01/19 Part E 143 01/03/16
Section Page Date
Part E 144 01/03/16
Attachments 145 25/01/19
DAADs 146 01/03/16
DAADs 147 01/03/16
DAADs 148 01/03/16
20140701GatwickAeroManv5.0
13
0.2.6 Annotation of Changes
Amendments will be annotated by a solid black line in the page margin and will be recorded in the list of effective pages or paragraphs.
0.2.7 Temporary Revisions
Temporary revisions are not used. Permanent changes to the Aerodrome Manual will require the document to be issued with a new version number.
0.2.8 Distribution System The Aerodrome Manual is distributed electronically, to the following:- Chief Executive Officer Gatwick Airport Ltd Chief Operating Officer Gatwick Airport Ltd Chief Planning Officer Gatwick Airport Ltd Head of Airside Operations Gatwick Airport Ltd Head Airspace Strategy & Engagement Gatwick Airport Ltd
Head of Engineering Gatwick Airport Ltd Chief Fire Officer Gatwick Airport Ltd Head of Stable Operations Gatwick Airport Ltd Head of Terminals and Passenger Services Gatwick Airport Ltd Senior Airside Engineering Manager Gatwick Airport Ltd Director of EHS Gatwick Airport Ltd Airside Operations Lead Gatwick Airport Ltd Airside Operations Manager Gatwick Airport Ltd General Manager Air Navigation Solutions Safety & Airspace Regulation Group UK Civil Aviation Authority The Aerodrome manual is available online as follows:- business.gatwickairport.com
In addition, the Aerodrome Manual is also distributed to the following airside
operators:- Airdat Airline Services Alpha Flight Services Alpha LSG ASIG Aurigny British Airways
Cathay Pacific CCS
DHL Aviation dnata
easyJet Emirates Flightcare GASHCO Gate Gourmet Gatwick Ground Services Menzies North-Air
20140701GatwickAeroManv5.0
14
Norwegian OCS Omniserve Red Handling Signature S R Technics Storm Aviation Swissport Thomas Cook TUI Virgin Atlantic
A Gatwick Airport Notice – GAN – will advise when a new or amended version
of the Aerodrome Manual is issued.
1. General Information
1.1 Purpose and Scope
The aerodrome manual describes how the aerodrome infrastructure, facilities and operational procedures will be operated safely. It contains all the relevant information to describe the management structure and its’ systematic approach to aerodrome operations. As well as the aerodrome operational procedures the manual describes the day-to-day functioning of the aerodromes management system, its safety culture, performance against safety targets and objectives. Due to the size and complexity of operations, and related procedures, the aerodrome manual does not contain all the procedures, but where applicable references to the procedures are included within the aerodrome manual. Referenced information, documentation and procedures are made available as necessary to all operational staff by means of the following, to describe the safety standards and procedures which shall be implemented and enforced in compliance with the Competent Authority. UK AIP – www.nats-uk.ead-it.com/public/index.php.html Gatwick Airport Conditions of Use – www.gatwickairport.com General Advice Notices – promulgated by GAL via email Gatwick Airport Directives – business.gatwickairport.com Gatwick Airport Byelaws – www.gatwickairport.com Health and Safety at Work Act 1974 - www.hse.gov.uk Management of Health and Safety at Work Regulations 1999 – www.hse.gov.uk
1.2 Legal Requirements for the Aerodrome Certificate
Prior to commencing the operation of an aerodrome, the aerodrome operator shall obtain the applicable certificate issued by the Competent Authority.
20140701GatwickAeroManv5.0
15
London Gatwick Aerodrome is authorised to operate in accordance with the provisions of regulation (EC) No216/2008 and its implementing rules, the aerodrome certification basis, the terms of the certificate and the aerodrome manual.
The content of this aerodrome manual reflects the certification basis and the requirements set out in Part-ADR.OR.E and Part-ADR.OPS, as applicable and shall not contravene the terms of the certificate. This aerodrome manual contains or refers to all necessary information for the safe use, operation and maintenance of the aerodrome, its equipment, as well as its obstacle limitations and protection surfaces and other areas associated with the aerodrome.
1.3 Conditions for use of the aerodrome
Use of the Airport is subject to the conditions laid down in the UK Aeronautical Information Publication - www.nats-uk.ead-it.com/public/index.php.html, the Gatwick Airport Limited Conditions of Use which can be viewed on the GAL website www.gatwickairport.com the Gatwick Airport Byelaws 1996 (a copy of which is included as an APPENDIX to this Manual) and the Gatwick Airport Directives and Notices in force at the time. Copies of the latter publications may be obtained from GAL.
1.4 Aerodrome operating responsibilities
Gatwick Airport is responsible for the safe operation and maintenance of the aerodrome in accordance with Regulation (EC) No 216/2008 and its implementing rules.
Gatwick Airport shall grant access to any person authorised by the Competent Authority, to:
any facility, document, records, data, procedures or any other material relevant to its activity subject to certification or declaration, whether it is contracted or not; and
perform or witness any action, inspection, test, assessment or exercise the Competent Authority finds is necessary.
The Competent Authority should make initial contact through the Airside Operations Manager who is available H24, to assist and facilitate audits / inspections as requested.
20140701GatwickAeroManv5.0
16
Part B Aerodrome Management System,
qualification and training requirements
20140701GatwickAeroManv5.0
17
Part B – Aerodrome Management System, qualification and training requirements 2. Aerodrome Management System, qualification and training requirements
2.1 Aerodrome Organisation and Responsibilities
Organisation charts
20140701GatwickAeroManv5.0
18
Airside Operations – Senior Management
Head of Airside Compliance has direct access to the Accountable Manager for Aerodrome safety matters and is responsible to the Accountable Manager
Head of Airside
Airside Operations Lead
Airside Improvements
Lead
Airside Standards Lead
Airspace Performance
LeadChief Fire Officer
Senior Airside Engineering
Manager
Head of Airside Compliance
Accountable Manager
20140701GatwickAeroManv5.0
19
Airside Operations – Duty Team
Airside Operations Lead
Airside Flow Lead
x 5
Airside Flow Planner
x 16
Airside Control Lead
x 5
Airside Operations Controller
x 48
Airside Operations Support Team
x 24
Airside Operations Manager
x 6
20140701GatwickAeroManv5.0
20
Airside Engineering
20140701GatwickAeroManv5.0
21
Chief Fire Officer
Station Manager
Red Watch
Watch Manager
x 2
Crew Manager
x 2
Firefighter
x 14
Station Manager
White Watch
Watch Manager
x 2
Crew Manager
x 2
Firefighter
x 14
Station Manager
Float
Watch Manager Float
x 2
Station Manager
Blue Watch
Watch Manager
x 2
Crew Manager
x 2
Firefighter
x 14
Station Manager
Green Watch
Watch Manager
x 2
Crew Manager
x 2
Firefighter
x 14
Deputy Chief Fire Officer
Airport Fire Service
20140701GatwickAeroManv5.0
22
Person with overall responsibility for safety and Accountable Manager
Stewart Wingate Chief Executive Officer – Gatwick Airport Ltd
Executive Member responsible for safety
Chris Woodroofe Chief Operating Officer – Gatwick Airport Ltd
Senior person accountable for Aerodrome Operations
Kan Ni Head of Airside Operations
Manager responsible for
Aerodrome Regulation and Safety
Jerry Barkley Head of Airside
Compliance
Manager responsible for day
to day Aerodrome Operations
Steve Maggs Airside Operations Lead
Manager responsible for
RFFS provision Simon Petts
Chief Fire Officer
Nominated ATC Providers
Representative Markus Biedermann
General Manager ANS
Assistant Airside
Compliance Manager Keith Burridge
Airside Compliance Support Manager
Janet Gilroy
Airside Operations
Managers Ben Fordham Glenn Lindup
Miles Lord Ray Morwood
Nigel Wise 1 x Vacancy
Station Managers x 5
Watch Managers x 5
20140701GatwickAeroManv5.0
23
Absence of Post Holders
Current Post Holder
Position
Persons authorised to deputise in the event of absence
Stewart Wingate (Accountable Manager)
Chief Executive Officer
Chief Operating Officer
Chris Woodroofe
Chief Operating Officer
Head of Airside Operations
Kan Ni
Head of Airside Operations
Airside Operations Lead
Jerry Barkley
Head of Airside Compliance
Assistant Airside Compliance Manager
Steve Maggs
Airside Operations Lead
Airside Operations Manager
Simon Petts
Chief Fire Officer
Deputy Chief Fire Officer
Ben Fordham Glenn Lindup Miles Lord Ray Morwood Nigel Wise Vacancy x 1
Airside Operations Manager
Airside Control Lead
Safety Accountabilities & Responsibilities
Chief Executive Officer – Stewart Wingate
The Chief Executive Officer is the accountable manager for Gatwick Airport Limited. The Chief Executive Officer has overall safety responsibility for passengers and GAL employees at the Airport and also has responsibility for ensuring safety consultation, facilitation and monitoring of the airport’s business partners, suppliers and service providers is undertaken.
The Chief Executive Officer’s key areas of responsibility include:
Ensuring that the airport’s safety policy and management systems are produced, kept up-to date and meet corporate policy standards and procedures.
Taking a leadership role in the airport’s safety programme and ensuring that safety never becomes subordinate to financial matters.
Ensuring compliance with all safety related legislation applicable to the management of the aerodrome and airport facilities.
Accountability for the annual business plan (including the capital programme) is sufficiently resourced to achieve compliance with the airport safety policy and management system.
Ensuring that annual safety improvement objectives are implemented.
20140701GatwickAeroManv5.0
24
Appointing safety conscious direct reports, monitoring their performance and ensuring that safety is given the highest priority within their training and development plans.
Ensuring that full consideration is given to the safety integrity of changes in the airport’s organisation structure and business processes.
Ensuring that the policies, standards and procedures are set and complied with and they contribute to the success of the airport’s safety policy and management system.
Ensuring that the airport capital projects comply with the safety elements of GAL’s project process.
In the event of an incident occurring at the airport regardless of whether more senior GAL personnel are present, the airport Chief Executive Officer has overall accountability for the effective response and management of the incident.
Chief Operating Officer – Chris Woodroofe
The Chief Operating Officer is accountable to the GAL Board for defining, deploying and monitoring GAL’s strategy and compliance process to enable the company and its departments to have safety focused strategic plans and compliance regimes. The Chief Operating Officer has prime responsibility for supporting the Chief Executive Officer to comply with his legal duties.
The Chief Operating Officer’s key areas of responsibility include:
Taking a leadership role in GAL’s Operational Departments’ safety programme and ensuring the provision of systems which ensure that safety never becomes subordinate to financial matters.
Championing safety at GAL
Supporting all GAL departments and functions to monitor safety performance across GAL.
Ensuring that the Operational Departments implement the annual GAL Safety improvement objectives.
Ensuring that the Operational Departments’ policies, standards, procedures and practices contribute to the success of GAL’s Safety Policy and Management System.
Appointing safety conscious direct reports (and functional direct reports), monitoring their performance and ensuring that safety is given the highest priority within their training and development plans.
Ensuring the annual business plans for the operational functions are sufficiently resourced to achieve compliance with the GAL safety policy and management system.
Supporting the Chief Executive Officer to ensure that full consideration is given to the safety integrity of changes in the airport organisational structures and business processes.
Ensuring that the airport process improvement work has safety as an integral and priority element.
20140701GatwickAeroManv5.0
25
Ensuring that proper liaison takes place on the activities of the police and armed forces in so far as their shared risk activities fall under the jurisdiction of the Chief Executive Officer.
Ensuring that there is liaison with those who have Operational functional responsibilities which might affect safety at Gatwick.
Head of Airside Operations – Kan Ni
The Head of Airside Operations is the senior person accountable for Aerodrome Operations and is responsible for defining, deploying and monitoring, the Airside Operations department's strategy and compliance process to enable the department to have safety focused plans and compliance regimes.
The Head of Airside Operations’ key areas of responsibility at Gatwick include:
Leading Gatwick Airport's Airside Safety Management System and ensuring Emergency planning is delivered in accordance with Aerodrome Certification requirements.
Ensuring that aerodrome safety does not become subordinate to financial matters.
Setting demanding objectives for airside safety improvement and providing support to achieve them.
Ensuring asset stewardship is effectively managed within the Operational departments to ensure safety during maintenance and project work.
Ensuring that policies, standards, procedures and practices are aligned at all times.
Recruiting, motivating and monitoring safety conscious direct reports, identifying suitable individual development plans.
Appraising members of the Executive of all airside operational matters that may influence or impact compliance with aerodrome certification requirements.
Maintaining and developing constructive relationships with all stakeholders in the safe and efficient operation of the airfield.
Airside Operations Lead – Steve Maggs
Provide leadership for the H24 Airside Operations team and drive a high performance culture aligned to the organisational values.
Accountable for the safe and consistent delivery of operational and safety KPIs; deliver excellent airline and passenger service, On Time and Runway Capacity Performance and Safety performance airside.
Work collaboratively to ensure GAL’s, customers and stakeholders needs are met.
Ensure resources and resilience are always available to enable delivery whilst staying within budget.
Accountable for driving and improving standards and consistency across the operational teams.
Accountable for developing people and the team; in particular technical competencies and behavioural skills and recencies are maintained across the entire airside operational duty teams. Ensure that people work as One Team across shifts and functions.
20140701GatwickAeroManv5.0
26
Drive a Just Safety culture and ensure Gatwick operates beyond compliance.
Drive continuous improvement through the H24 teams.
Engagement and liaison with the other functions within the Business Unit – Standards, Improvements, Compliance, Fire, Engineering and Airspace, work together to implement the strategy of the Airside organisation
Participation at FLOPSC, LRST, ASG (Airside Safety Group), Aerodrome Safety Oversight (Governance) and SHELT.
Operate in accordance with the Aerodrome Manual, applicable CAA/ EASA regulations and key Airport Performance Indicators.
Accountability for the talent and performance processes for the airside duty teams
Lead Airside interactions with ATC, AAIB, Meteorological Offices, Airlines, Police, Stable Operations disruption Command & Control
Accountable for departmental disruption planning, wildlife hazard management and tactical safeguarding (block closures, crane, obstacle limitation surfaces)
Accountable for delivery of adverse weather plan and coordination of business continuity resilience.
Airside Operations Manager - Ben Fordham Glenn Lindup
Miles Lord Ray Morwood Nigel Wise
Vacant x 1
The Airside Operations Manager reports to the Airside Operations Lead and is responsible for the day to day management of the Airside Operations Shift team. Accountable for the Safety, Environment, Compliance and Performance of the Airfield. Focal point for customers and airport partners and accountable for the H24 operation of the aerodrome in accordance with the certificate.
They are the Aerodrome Certificate Holder’s delegated authority during the absence of the Accountable Manager and/or Head of Airside Operations. The AOMs are the authorised persons in accordance with Article 257 – Power to detain aircraft. The AOMs key areas of responsibility at Gatwick include:
Provide leadership for the Airside Operations team and drive a high performance culture aligned to organisational values
Accountable for the line management and performance of the team
Drive a just safety culture and ensure Gatwick operates beyond compliance
Define and execute the operating plan managing cost efficiently
Accountable for executing operations in accordance with the Aerodrome Manual, applicable EASA/CAA regulations and key performance indicators
Ensure all standards, regulatory legal and statute requirements are proactively met and adhered to accordingly including compliance with Environment, Health and Safety, (EHS) and sustainable development policies within the Airside Operations function.
20140701GatwickAeroManv5.0
27
Accountable for the Airfield Status in line with the Aeronautical Information Publication (AIP) and promulgation of NOTAMs and airside operational information.
Deliver excellent airline and passenger service, leading airside On Time Performance
Accountable for delivering runway throughput to meet the declared capacity
Responsible for Air Traffic service performance delivery
Accountable for winter and adverse operational performance
Accountable for the development of people and processes to meet business and customer requirements
To ensure the safe throughput of aircraft movements by liaising with the Operations integrators, ATC, AFS, AAIB, Meteorological Offices, Airlines, Police and the GMC Leader during periods of adverse weather, equipment serviceability, incidents and emergencies and any other major disruption.
To manage, co-ordinate and control resources during emergency incidents, aircraft recovery operations, adverse weather conditions, equipment serviceability, ice falls / vortex damage and unscheduled movements.
Leads communication to team and airside information to the wider business
Contributes to the capital development strategy and project execution
To manage aircraft ground engine testing, the night movement quota, the movement area works programme, airfield obstruction safeguarding and airfield congestion in accordance with statutory regulations and company policy.
Compile detailed reports on incidents and make any necessary recommendations for follow up.
Head of Airside Compliance – Jerry Barkley
The Head of Airside Compliance is accountable to the Head of Airside Operations and is responsible for ensuring compliance, standards and procedures are effectively managed in accordance with the Aerodrome Certification requirements.
The Head of Airside Compliance key areas of responsibility at Gatwick include:
Taking a leadership role in Airside Operations safety standards and ensuring adherence to and delivery of outputs from safety systems.
Ensuring activities are undertaken to deliver GAL safety objectives. Act as the Aviation Safety Manager in accordance with EASA ADR.OR.D.005 Management System and ADR.OR.D.015 Personnel Requirements and has direct access to, and is responsible to the Accountable Manager.
Lead Compliance Team to ensure compliance with and maintenance of airside safety standards and recommended practices in accordance with the requirements of the aerodrome certificate.
Manage the safeguarding process for the aerodrome in accordance with EASA ADR.OPS.B.075 using CAP 738 for guidance.
20140701GatwickAeroManv5.0
28
Appointing safety conscious direct reports (and functional direct reports), monitoring their performance and ensuring that safety is given the highest priority within their training and development plans.
Ensuring effective communication processes are in place with CAA SARG and other H&S agencies.
Ensuring that "best practice" operational standards and procedures are identified and implemented.
In accordance with ADR.OR.D.015 (c) The Airside Compliance Team is responsible for the development, maintenance and day-to-day management of the Safety Management System. The Head of Airside Compliance acts independently of other Managers within the organisation and has direct access to the Accountable Manager and to appropriate management for Aerodrome safety matters and is responsible to the Accountable Manager.
Chief Fire Officer – Simon Petts The Chief Fire Officer, reporting to the Head of Airside Operations is responsible for the overall operational efficiency of the RFFS. This is achieved through the effective management of the Fire Service team.
The Chief Fire Officer’s key areas of responsibility and safety accountabilities at Gatwick include:
Manage staff and resources to ensure compliance with the Aerodrome Certificate, company standards and CAA/EASA regulations.
Ensure mandatory training is carried out to maintain continuous compliance with CAA/EASA regulations.
Ensure that safety is given the highest priority at all times in meeting the operational standards for equipment and personnel.
Liaise with airlines, airport agencies, external emergency services and other bodies to achieve effective co-operation in all areas of responsibility.
Comply with any safety targets set by the Chief Executive Officer (CEO).
Ensure controls are in place to minimize the risk of environmental incidents. Maintaining and updating Emergency Orders to ensure Gatwick complies with the requirements of the Aerodrome certificate.
Deputy Chief Fire Officer – Simon O’Brien
The Deputy Chief Fire Officer assists the Chief Fire Officer in the day to day running of the Airport Fire Service (AFS) including assisting to develop and maintain policy and processes that ensures the AFS meet the business needs of Gatwick Airport. Lead and oversee on Fire Service projects as required, deputise for CFO and/or represent AFS in stakeholder meetings as required. As operationally required, accountable for the day to day operation of the Airport Fire Service and compliance with processes and systems adopted by Gatwick Airport Ltd (GAL), taking charge/control of a major airfield incident.
As operationally required manage and maintain control of an incident in emergency situations by acting as an incident commander, liaising with internal/external bodies in accordance with laid down regulations/procedures, identifying the extent of the incident and area to be cordoned off, identifying
20140701GatwickAeroManv5.0
29
sectors to be resourced, mitigating risks, issuing orders to the Watch Managers and effectively deploying all resources at the incident in order to save life and preserve property.
As operationally required to Deputise for the CFO taking full operational control of an incident in emergency situations by acting as Silver Commander, liaising with external/ internal bodies in accordance with laid down regulation/procedures.
Promote and ensure team compliance with safe working practices, incorporating safety checks into the daily operational plan, monitoring that processes and procedures are followed as agreed and that non-compliance is being addressed appropriately, updating local policies and procedures and communicating these changes to the team to ensure that PPE and operational kit is fit for purpose, that self, colleagues and customers are not put at risk and that health and safety and the environment are given the highest priority in order to protect the business.
Develop contingency plans, systematically reviewing and developing risk assessments, utilising the risk register, being aware of the key risks to the business, complying with the mitigation practices in the risk register and taking a lead safety role both on and off the station to ensure that self, colleagues and customers are not put at risk.
Carry out other duties as required to do so by the business, including substituting at a different grade within the Fire Service team when operationally required to do so. In support of the CFO, manage and co-ordinate aspects of AFS Emergency Planning and support wider airport contingency planning and arrangements.
Support Gatwick Airport in various Operational & Fire Safety related matters.
Lead in projects and working parties and to carry out any other duties that may be outside the standard remit for the purpose of personal development, or as may be reasonably required by the Company.
Manage and coach/mentor the performance of the Station Managers, carrying out appraisals and supporting their development in accordance with the technical and general competency frameworks to meet their development needs. Carrying out resource planning activities and managing any conduct and capability related issues to ensure that the team perform to the required level and that the Station Managers take responsibility for the effective performance and development of the wider team.
Station Managers x 5
Each watch has a Station Manager who is responsible for the operational efficiency and day to day running of the RFFS. The Station Manager reports directly to the Deputy Chief Fire Officer.
General responsibilities and safety accountabilities
To fulfill the role of Incident Commander at an aircraft accident or incident. This role may then be handed over to the Incident Commander of the Local Authority Fire Service on their arrival.
Manage staff and resources to ensure compliance with, and maintenance of, airside safety standards and recommended practices in accordance with the Aerodrome Certificate, company standards and CAA publications.
20140701GatwickAeroManv5.0
30
Day to day liaison with other airport departments with regard to safety and security.
To ensure any necessary risk assessments are carried out promptly and accurately and the findings disseminated to all RFFS personnel.
Compile detailed reports on incidents and make any necessary recommendations for follow up. Maintain competence in the role of Station Manager through the MOC Scheme.
Disseminate all information to RFFS personnel with regard to Health & Safety aspects, and company standards.
Initiate immediate inquiries following any accident or incident to members of staff, vehicles or equipment.
Follow up any safety targets set by the Deputy Chief Fire Officer.
Brief crews on any operational safety matters.
Senior Airside Engineering Manager – Paul Leonard The Senior Airside Engineering Manager is accountable to the Head of Airside and is responsible for delivering high service and performance for Aeronautical Ground Lighting, airside stand facilities and Civils’ infrastructure in accordance with Aerodrome Certification requirements. The Senior Airside Engineering Manager’s key areas of responsibility include:
The completion of safety, planned and corrective maintenance in line with the Airside Operations Business Unit and Regulatory targets.
Taking a leading role in developing and maintaining a culture of world class health, safety, security and environmental standards. Support safe systems of work structures, attaining any resulting required appointments. For example: Electrical Safety Rules (ESR), Authorised Persons (AP), Confined Spaces (CS) and High Voltage (HV).
Achieving Core Service Standards compliance for assets within the performance requirements structure.
Manage the development, improvement and performance of operations plans by working with Operations Planners.
Working with the Airside Operations Lead to ensure all compliance/regulatory requirements and performance targets are met.
Implementation of agreed Airside Engineering management strategy and compliance with ISO 55001.
Agrees, reviews and coaches performance of directly managed team to ensure that planned targets can be met and potential of team members fulfilled.
Working with other Stakeholder, Service & Engineering Managers and teams to drive continuous performance improvements.
20140701GatwickAeroManv5.0
31
Operational Resilience and Crisis Lead – Helen Ingold
The Operational Resilience and Crisis Lead is accountable to the Head of Airside Operations for defining, leading and managing activities to ensure emergency planning, business continuity and contingency planning for Gatwick Airport is delivered in accordance with the Aerodrome Certification requirements.
Accountability
External stakeholder engagement and regulatory compliance with respect to civil contingency and major incident
Developing a programme of contingency planning and testing activities
Organisation and co-ordination of Airport exercises to ensure Gatwick complies with the requirements of Aerodrome certificate.
20140701GatwickAeroManv5.0
32
Safety Committees
This section describes the committees, boards, groups and regularly scheduled meetings that hold
specific and significant responsibilities for safety governance and management at Gatwick Airport.
Safety Governance & Management Structure
GAL has a comprehensive safety governance and management committee structure in place that
enables the airport to continuously monitor, maintain, and review the safety strategies, objectives, and
activities across the airport.
This structure drives both formal and direct engagement between the non-executive board of directors,
executive management, departmental management, personnel, and stakeholders, including regulators
and local authorities.
The following diagram summarises GAL’s safety governance and management committee structure at
the high, business management level.
This structure provides GAL with a fully comprehensive strategic, tactical, operational, and
deliverable direction, decision making, and resource allocation model for effective safety
governance and management, and ensures that the airport’s critical safety activities are given
the attention and focus that they require at every level of the organisation and with the
participation of all interested parties.
The following chart outlines the individual GAL safety committees with specific and significant
responsibilities for safety oversight and the relationships between them.
20140701GatwickAeroManv5.0
33
Each safety committee described in this chapter is summarised as follows:
Purpose: the core objective(s) of the committee
Chair: the person(s) responsible for overseeing the committee’s meetings
Secretary: the person(s) responsible for the committee’s administration
Members: the person(s) invited to and/or required to attend the committee
Frequency: the number of times that the committee convenes a meeting
Reporting: the authorities to whom the committee reports its findings/outputs
Reviews: the audit process that assesses the committee’s ongoing suitability
Safety Duties: the committee’s specific safety responsibilities
Non-Executive Safety Committees
This section summarises the Terms of Reference (ToRs) for those safety committees with specific
and significant responsibilities for the overall strategic approach to safety governance and
management at Gatwick Airport.
Audit & Governance Committee
Purpose: To provide an independent oversight of corporate governance, system
of internal control, risk management, and financial reporting processes
for the company.
Chair: A Non-Executive Company Director
(as nominated by the Board of Directors)
Secretary: As nominated by the Chair
Membership: The Committee shall be appointed by the Board of Directors, on the
recommendation of GAL’s Nomination & Remuneration Committee and
in consultation with the Committee Chair, from amongst the Non-
Executive Company Directors (at least one of whom must have recent
20140701GatwickAeroManv5.0
34
and relevant financial experience). The Committee shall consist of not
less than three members, one of whom shall be the Chair.
The following participants may be invited to attend Committee
meetings, as deemed required:
Chief Financial Officer (CFO)
Head of Business Assurance
External Auditors representative
Risk Management representative
Other Board of Directors members
The External Auditors and the Head of Business Assurance shall have
the right to meet with the Committee without Board of Directors
members present. The Head of Business Assurance shall have direct
access to the Committee Chair to ensure independence of the position.
A quorum shall be two members.
The Board of Directors Chair cannot be a member.
Frequency: Committee meetings shall be held a minimum of three times a year, and
at such other times as it sees fit.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
The External Auditors or Head of Business Assurance may request a
meeting if they consider that one is necessary.
Reporting: The Secretary shall minute proceedings and decisions of all Committee
meetings, including recording the names of those present and in
attendance. The minutes shall be circulated promptly to all members of
the Board of Directors, External Auditors, Head of Business Assurance,
and any other persons the Chair or Secretary deems necessary.
The Chair shall report orally to the Board of Directors on the
Committee’s proceedings after each meeting, including all performance
and material matters within its duties and responsibilities.
Where the Committee’s monitoring and review activities reveal cause
for concern or scope for improvement of a material nature, then
recommendations shall be made to the Board of Directors on the action
needed to address the issue or to make improvements.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, confirm that all responsibilities have been carried out, and
make any necessary recommendations to the Board of Directors.
This review shall take into account the views of the Board of Directors
on the Committee’s performance.
20140701GatwickAeroManv5.0
35
Safety Duties:
To review the company’s corporate governance framework and processes;
To review the effectiveness of the company’s internal control systems;
To review the company’s risk assessment process and management responses to
significant risks and be satisfied that the company has adequately discharged its duty
in relation to effective risk management;
To review management’s processes to identify, control and report fraud risks and be
satisfied that the company’s policies on business ethics and whistle-blowing are being
followed, and that control procedures are satisfactory;
To review and approve the company’s statements concerning corporate governance,
internal controls and risk management, prior to endorsement by the Board of Directors.
Environment, Health, Safety & Operational Resilience (EHSOR) Committee
Purpose: To assist the Board of Directors of the company by:
Reviewing the company’s strategy with respect to EHS, operational
resilience, and business continuity matters
Reviewing the company’s exposure to EHS, operational resilience,
and business continuity risks
Monitoring the company’s performance against EHS, operational
resilience, and business continuity targets
Encouraging management commitment and accountability with respect
to managing the company’s EHS, operational resilience, and business
continuity risks
Reviewing and approving (where considered necessary) company-
wide EHS initiatives, policies, and procedures.
Chair: A Non-Executive Company Director
(as nominated by the Board of Directors)
Secretary: Company Secretary
(or as nominated by the Company Secretary)
Frequency: Committee meetings shall be held a minimum of three times a year, and
at such other times as it sees fit.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all
Committee meetings, including recording the names of all those
participants present and in attendance. The minutes shall be circulated
promptly to all members of the Committee, and, once approved, may
be circulated to all members of the Board of Directors, unless it would
be inappropriate to do so.
The Chair shall report orally the Board of Directors on the Committee’s
proceedings after each meeting, including all performance and material
matters within its duties and responsibilities.
20140701GatwickAeroManv5.0
36
Reviews: Members shall conduct an annual review of the terms of reference and
performance, confirm that all responsibilities have been carried out, and
make any necessary recommendations to the Board of Directors.
This review shall take into account the views of the Board of Directors
on the Committee’s performance.
Safety Duties:
To receive and review regular reports from the business on the key issues relating to
safety and business’ performance in managing the risks associated with it, including
airside safety, asset management, air traffic management, and aviation, landside, and
information security;
To review key issues arising from ‘high potential’ incidents
To be kept informed of the circumstances of any ‘high potential’ incident, and the
measures being taken after the event
To review management’s safety action plans, where appropriate
To review the safety reporting measures adopted by the company
To review the company’s strategy relating to the impact of the company’s operations on
the health of its employees, contractors, and relevant stakeholders
To review management’s health action plans, where appropriate
To review the company’s occupational health performance
To review the company’s strategy relating to the impact of the company’s operations on
the environment, and how the company adapts its’ business in the light of climate
change
To review management’s environmental action plans, where considered appropriate
To review the company’s environmental performance
To receive a report on:
Progress against the company’s current EHS strategy
The Key EHS compliance issues faced by the company
Any forthcoming legislation and other requirements relating to EHS matters likely to
affect the company and how the company will comply with such legislation and other
requirements
To receive and review reports from the business on its progress with complying with the
recommendations of the MacMillan Report
To receive and review reports from the business on its compliance with its licence
conditions as to operational resilience
To receive and review contingency plans from the business.
Executive Safety Committees
This section summarises the Terms of Reference (ToRs) for those safety committees with
specific and significant responsibilities for the tactical approach to safety governance and
management at Gatwick Airport.
20140701GatwickAeroManv5.0
37
Executive Management Board (EMB)
Purpose: To assist the Board of Directors of the company by:
Developing and implementing business strategy, plans, and budgets;
Deciding on matters that will affect the growth, reputation, and
achievement of business plans and targets
Ensuring effective monitoring of operating and financial performance,
and the implementation of remedial actions where appropriate, at both
the directorate and overall company level
Assessing and controlling risk and ensuring overall compliance with
legal and regulatory requirements
Prioritising and allocating financial and human resources
Ensuring effective performance against business objectives and
priorities and taking remedial action where necessary
Developing and implementing the company’s vision, values, strategy,
ethics, standards, policies, and procedures
Ensuring that the company’s obligations to its shareholders and
stakeholders are understood and met.
Chair: Chief Executive Officer (CEO)
Secretary: Company Secretary
(or the Personal Assistant to the CEO)
Membership: Membership shall comprise of the following participants, in addition to
the Chair and Secretary (as required and available):
Chief Commercial Officer
Chief Construction Officer
Chief Development Officer
Chief Financial Officer (CFO)
Chief Information Officer (CIO)
Chief Operating Officer (COO)
Chief Planning Officer
Human Resources (HR) Director
Other senior managers may also be invited to attend.
A quorum shall be the Chair or CFO, plus two members.
Frequency: Board meetings shall be held once a month.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reviews: Members shall conduct an annual review of the terms of reference and
performance (and that of the Sub-Committees and individual members)
and make any changes as required.
Safety Duties:
To consider and ensure that the needs and expectations of the company’s key internal
and external stakeholders are effectively managed;
To receive and review updates arising from Gatwick Airport Consultative Committee
20140701GatwickAeroManv5.0
38
(GATCOM) - the Joint Steering Group (JSG) and the Airline Operators Committee
(AOC) being the key forums for external stakeholder engagement;
To review responses to key stakeholders in respect of issues that will have significant
financial, operational, investment, or Health, Safety, Security, and Environment (HSSE)
impact;
To consider and ensure implementation of the company risk management framework,
oversee the monitoring of major and strategic risks affecting the business, and ensure
reporting of such risks to the Board of Directors;
To receive and review reports from the Resilience Planning Group and the Joint
Resilience Forum;
To review, assess, and monitor the adequacy of the company’s emergency
preparedness and the coverage and quality of disaster recovery and contingency plans;
To approve the test schedule, appraise the test results, and ensure remedial action is
taken where appropriate, to ensure disruption and risks to people, assets and the
business is minimised and that GAL can recover in a timely, organised and cost effective
manner;
To ensure effective and efficient internal control and corporate governance processes
are in place and operating;
To agree the Business Assurance plans, to consider and monitor implementation of
recommendations agreed in Business Assurance reports, and to oversee the
implementation of recommendations agreed within the external auditor management
letter as approved by the Audit & Governance Committee;
To provide overall governance of Health, Safety, Sustainability, Environmental, and
Section 106 (S106) requirements risks, targets, and incidents, and to update the
Board in line with agreed reporting requirements;
To review and approve the company’s insurance programme, its coverage of significant
risks, limitations of cover, key deductibles, and credit quality of the company’s insurers,
and report to the Board of Director as required;
To provide overall governance of security risks and requirements;
To consider, approve and communicate all corporate policies and mandates (ensuring
alignment with strategy).
Managing Corporate Responsibility (MCR) Committee
Purpose: To establish a systematic and aligned company-wide management
approach for:
Delivering the company’s EHSOR and sustainability strategy;
Monitoring the company’s exposure to EHSOR and sustainability
risks;
Monitoring the company’s performance against EHSOR and
sustainability targets;
Encouraging management commitment and accountability with
respect to company-wide EHSOR and sustainability initiatives,
policies, and procedures.
Chair: EHS Director
20140701GatwickAeroManv5.0
39
(or as nominated by the Chair)
Secretary: Personal Assistant to the EHS Director
(or as nominated by the Chair)
Membership: Membership shall comprise of the following participants, in addition to
the Chair and Secretary (as required and available):
Chief Executive Officer (CEO)
Chief Commercial Officer (CCO)
Chief Financial Officer (CFO)
Chief Information Officer (CIO)
Chief Operating Officer (COO)
Chief Planning Officer
General Counsel and Company Secretary
Human Resources (HR) Director
Department Head representatives
Senior EHS Department representatives
Other senior managers or specialist external advisors may also be
invited to attend
A quorum shall be the Chair, plus two members
Frequency: Committee meetings shall be held every three months
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Board
meetings, including recording the names of all those participants
present and in attendance.
The Chair shall circulate any agreed actions to all members of the
Group, and shall update the EMB, EHSOR, and Board of Directors (or
their Sub-Committees and Working Groups), on the Group’s
proceedings, as appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required
Safety Duties:
To review and monitor the company’s safety performance, including its airside safety,
asset management, air traffic management, and aviation, landside, and information
security;
To review the company’s response to ‘high potential’ incidents, including the
implementation of management’s action plans after the event;
To review the company’s response to ‘significant’ incidents, including the
implementation of management’s action plans after the event;
To review and monitor the impact of the company’s operations on the health of its
employees, contractors and any other relevant stakeholders;
To review and monitor the company’s performance with regard to occupational health
matters;
To review and monitor the impact of the company’s operations on the environment,
including the implementation of management’s action plans to improve environmental
performance;
20140701GatwickAeroManv5.0
40
To review and monitor the resilience and reliability of Gatwick Airport as an operating
asset to deliver consistent, predictable, uninterrupted service to minimise passenger
disruption and flight delays, and prevent reputational damage;
To review and monitor progress against the company’s EHSOR strategy;
To review and monitor the key EHSOR risks faced by the company;
To review and monitor the key EHSOR compliance issues faced by the company;
To review and monitor forthcoming legislation and other requirements relating to
EHSOR matters likely to affect the company, and how the company will comply with
such legislation and other requirements;
In the event of a serious operational failing at Gatwick Airport, to review a report and
action plan on the incident.
Management Safety Committees
This section summarises the Terms of Reference (ToRs) for those safety committees with
specific and significant responsibilities for the operational approach to safety governance and
management at Gatwick Airport.
EHS Working Group
Purpose: To support the MCR in delivering GAL’s EHSOR strategy, objectives
and targets by establishing a systematic and aligned management
approach to:
Monitor EHS incidents, trends and performance targets;
Review the effectiveness of GAL’s EHS Management System;
Ensure commitment and accountability with respect to managing the
company’s risks in relation to EHS;
Engage internal and external stakeholders in relation to the EHSOR
strategy and delivery of a strong EHS culture.
Chair: Designated Business Unit/Department Head
(as nominated by the Secretary)
Secretary: Head of EHS (Operations)
(or as nominated by the Secretary)
Membership: Membership shall comprise of nominated members of all business
units/departments, in addition to the Chair and Secretary (as required
and available).
Frequency: Group meetings shall be held once a month.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Board
meetings, including recording the names of all those participants
present and in attendance.
The Secretary shall circulate any agreed actions to all members of the
Group, and shall update the EMB, MCR, EHSOR, and Board of
Directors (or their Sub-Committees and Working Groups), on the
20140701GatwickAeroManv5.0
41
Group’s proceedings, as appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To oversee the implementation of the company’s EHS objectives and targets, by
reviewing performance indicators, understanding trends, monitoring performance, and
directing remedial actions where required;
To oversee the company’s EHS incident response performance, to take proactive
measures to improve where appropriate, and to promote successes;
To ensure appropriate business processes are in place to report, escalate and manage
serious incidents in a timely and efficient manner, and to manage any associated public
relations;
To regularly assess the effectiveness and efficiency of the EHS Management System’s
processes, systems and procedures in achieving:
The delivery of the EHS strategy, objectives, and policy;
Regulatory compliance;
Effective EHS risk management;
To oversee and monitor the implementation of the company’s EHS risk management
framework, and processes;
To oversee and monitor the implementation of an effective EHS assurance programme
(including external assurance activities);
To oversee and monitor the implementation of consistent communication and reporting
of the EHS programme;
To oversee and monitor the implementation of the EHS competency framework,
programme, and objectives;
To promote a proactive EHS culture across the business that is focussed on preventing
incidents.
Asset Steward Working Group
Purpose: The purpose of the Asset Steward Working Group shall be to support
the MCR in delivering GAL’s EHSOR strategy, objectives and targets
by establishing a systematic and aligned management approach to:
Monitor asset trends and performance targets;
Review the effectiveness of the Strategic Asset Management Plan
(SAMP);
Ensure commitment and accountability with respect to managing the
company’s risks in relation to asset management;
Engage internal and external stakeholders in relation to the SAMP and
delivery of a strong asset management culture.
Chair: Designated Business Unit/Department Head
(as nominated by the Secretary)
Secretary: Head of Engineering
(or as nominated by the Secretary)
20140701GatwickAeroManv5.0
42
Membership: Membership shall comprise of nominated members of all business
units/departments, in addition to the Chair and Secretary (as required
and available).
Frequency: Group meetings shall be held once a month.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Board
meetings, including recording the names of all those participants
present and in attendance.
The Secretary shall circulate any agreed actions to all members of the
Group, and shall update the EMB, MCR, EHSOR, and Board of
Directors (or their Sub-Committees and Working Groups), on the
Group’s proceedings, as appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To oversee the implementation of the company’s objectives and targets, by reviewing
performance indicators, understanding trends, monitoring performance, and directing
remedial actions where required;
To oversee the company’s asset performance, to take proactive measures to improve
where appropriate, and to promote successes;
To ensure appropriate business processes are in place to report, escalate and manage
performance and compliance in a timely and efficient manner, and to manage any
associated public relations;
To regularly assess the effectiveness and efficiency of the SAMP processes, systems
and procedures in achieving:
The delivery of the SAMP, objectives, and policy;
Regulatory compliance;
Effective asset risk management;
To oversee and monitor the implementation of the company’s asset risk management
framework, and processes;
To oversee and monitor the implementation of an effective asset assurance programme
(including external assurance activities);
To oversee and monitor the implementation of consistent communication and reporting
of the asset management programme;
To oversee and monitor the implementation of the SAMP framework, asset
management programme, and objectives;
To promote a proactive culture across the business that is focussed on asset
performance.
Stable Operations Board (SOB)
Purpose: To support the MCR in delivering GAL’s EHSOR strategy, objectives
and targets, and to measure performance against the Stable
Operations mission:
20140701GatwickAeroManv5.0
43
“Protect the operation and passenger experience, in a busier airport, by
preventing, preparing or recovering as quickly as possible from an
incident.”
Chair: Chief Operating Officer (COO)
Secretary: Business Continuity & Risk Manager
Membership: Membership shall comprise of the following participants, in addition to
the Chair and Secretary (as required and available):
Head of Stable Operations;
Head of Engineering;
Head of Terminals & Passenger Experience;
Head of Airside Operations;
Head of Business Systems;
Head of Business Assurance.
A quorum shall be the Chair, plus two members.
Frequency: Board meetings shall be held once a month.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Board
meetings, including recording the names of all those participants
present and in attendance.
The Head of Stable Operations shall circulate any agreed actions to all
members of the Board, and shall update the EMB, MCR, EHSOR, and
Board of Directors (or their Sub-Committees and Working Groups), on
the Board’s proceedings, as appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To monitor trends from disruptive or potentially disruptive incidents;
To monitor current key risks to a stable operation, and prioritise resources to mitigate
those risks;
To monitor lessons to ensure the organisation learns and identify trends;
To monitor short-term predictions success (‘next 7 days’ vs. ‘last 7 days’);
To review factors that may destabilise the operation in the next three months and
high-level planning to reduce the impact;
To monitor development of predictive operational tools;
To monitor incident management capability against the recovery benchmark time (of
less than 20 minutes);
Readout from Stable Operations Council (managing the programme of work).
Joint Operations Group (JOG)
Purpose: To provide third party stakeholders with a formal environment in which
they are updated on the top operational risks facing the airport and the
operational resilience activities being undertaken by the company to
20140701GatwickAeroManv5.0
44
mitigate those risks, and to engage stakeholders in proposals for
improving operational efficiencies and passenger experience.
Chair: Chief Operating Officer (COO)
Secretary: Operations Support Manager
Membership: Membership shall comprise of the following participants, in addition to
the Chair and Secretary (as required and available):
Department Heads representatives;
Senior airline company representatives;
Senior ground handling company representatives;
Gatwick Airport Consultative Committee (GATCOM) Passenger
Advisory Group (PAG) representatives;
Airline Operators Committee (AOC) representatives;
Airport Consultative Committee (ACC) representatives.
Frequency: Group meetings shall be held once a month.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Group
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To communicate and review the current top operational risks identified by the
company;
To communicate and discuss the current operational resilience activities being
undertaken by the company;
To communicate and discuss proposals for improving operational efficiencies and
passenger experience;
To communicate and discuss any significant safety incidents, and the lessons learned;
To identify any priorities for actions to improve operational resilience performance;
To conduct a six monthly stakeholder consultation review of the airport’s top operational
risks and operational resilience measures.
EHS Safety Committees
This section summarises the Terms of Reference (ToRs) for those safety committees with
specific and significant responsibilities for the day-to-day delivery of EHS governance and
management at Gatwick Airport.
Weekly EHS Meetings
Purpose: To discuss, review and monitor the current EHS performance within an
EHS team’s area of responsibility, to identify trends, to identify
improvements to the available EHS information, and to identify priorities
20140701GatwickAeroManv5.0
45
for actions for continuous EHS improvements at Gatwick Airport.
Each of the following EHS teams at Gatwick hold their own weekly EHS
meeting:
Operations
Environment & Sustainability
Construction
Occupational Health & Wellbeing
Chair: EHS Team Head/Leader
Secretary: EHS team representative
(or as nominated by the Chair)
Membership: Membership shall comprise of EHS team representatives, in addition to
the Chair and Secretary (as required and available).
Frequency: Meetings shall be held every week.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To review and monitor current EHS audits
To review and monitor current EHS hot topics
To review and monitor current EHS communications
To review and monitor recent ‘significant’ incidents
To review and monitor EHS training
To agree and prioritise any required EHS actions
To track all agreed actions and audit recommendations to completion
Airfield Safety Committees
This section summarises the Terms of Reference (ToRs) for those safety committees with
specific and significant responsibilities for the day-to-day delivery of airfield safety governance
and management at Gatwick Airport.
Aerodrome Safety Oversight Group
Purpose: To ensure performance is being delivered to achieve a robust Safety
Management System (SMS) on the aerodrome.
Chair: Head of Airside Compliance
Secretary: As nominated by the Chair.
Membership: Membership shall comprise of the following participants, in addition to
the Chair (as required and available):
Head of Airside Operations;
Airport Fire Manager
20140701GatwickAeroManv5.0
46
Senior Airside Engineering Manager;
Airside Operations Lead;
Airside Disruption Planner
Airside Standards Lead
Airside Improvement Lead
Airspace Performance Lead
Airside Change Manager
Airside Compliance team representatives.
Frequency: Group meetings shall be held once a month.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Group
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To review and monitor aerodrome safety performance
To review and monitor airside progress against its safety KPIs/SPIs
To review and monitor wildlife hazard management performance
To make any recommendations for airside EHS improvements targets
To review any significant aerodrome safety incidents
To agree and prioritise any required aerodrome safety actions
To track all agreed actions to completion
To communicate any aerodrome safety learnings
Flight Operations Performance & Safety Committee (FLOPSC)
Purpose: To discuss, review and monitor airline operational and safety
performance at Gatwick Airport, adherence to noise and track keeping
rules, and to share best practice.
Chair: Head of Airside Operations
Secretary: As nominated by the Chair.
Membership: Membership shall comprise of the following participants, in addition to
the Chair (as required and available):
Head of Airside Operations:
Airside Operations Lead
Airspace Performance Lead
Airside Change Manager
Head of Airspace Strategy & Engagement
Sustainability Manager
Airside Operations department representatives;
Airside Compliance team representatives;
Airside Projects team representatives;
Flight Performance team representatives;
Airline company representatives;
20140701GatwickAeroManv5.0
47
ATC representatives (ANS and NATS);
CAA representatives;
Department for Transport (DfT) representatives;
BALPA
Frequency: Committee meetings shall be held once every two months.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all
Committee meetings, including recording the names of all those
participants present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To review and monitor airline operational performance
To review and monitor airline environmental performance at the airport
To review and monitor runway incursions
To review and monitor runway excursions
To review and monitor Airport Collaborative Decision Making (A-CDM)
To review and monitor airline projects at the airport
To review and monitor airline safety related issues at the airport
To agree and prioritise any required airline performance actions
To track all agreed actions to completion
Resilience Planning Group
Purpose: The Gatwick Resilience Planning Group enables multi agency liaison,
planning and training for incidents at Gatwick Airport. The purpose of
the Group is to improve the airport’s resilience to disruptive challenges
at every level through anticipation, preparation, prevention and
response.
Chair (Joint): Operational Resilience and Crisis Lead;
Chief Inspector, Sussex Police, Gatwick Division.
Secretary: Contingency Planning Manager.
Membership: Membership shall comprise of the following participants, in addition to
the Joint Chairs (as required and available):
West Sussex Fire & Rescue Service
Surrey Fire & Rescue Service
Surrey Police
South East Coast Ambulance Service (SECAmb)
West Sussex County Council
Surrey County Council
Highways Agency
National Air Traffic Services
Southern Railway
GAL Airside Operations
20140701GatwickAeroManv5.0
48
Deputy Airport Fire Manager
GAL Terminal Management
Other agencies as applicable including AOC and UKBF
Frequency: Group meetings shall be held every six weeks. Additional meetings
are convened at the Chair’s request to review progress on agreed
actions.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to all members and the Sussex
Operations Group by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Group
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all members and the LRF
secretary, and any such other persons the Chair or Secretary shall
deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference
and performance, and make changes as required.
Safety Duties
Safety Duties:
Develop plans and procedures to facilitate effective access to Gatwick Airport
during and after any significant emergency;
Ensure inter-agency co-ordination and communication with Casualty Bureau, EPIC
and non- EPIC Airlines;
Ensure that the processes and procedures relating to the ‘Reception Areas’ at
Gatwick Airport are effective;
Integrate ‘caring services’ agencies into the planning structure, particularly in
regard to the reception areas process;
Develop and co-ordinate Inter-Agency Learning and Development associated with
the handling of emergencies at Gatwick Airport;
To raise our business partners awareness of the need for emergency training.
Develop plans and procedures to facilitate a co-ordinated response to any
emergency at Gatwick Airport; including suspect devices, bomb warnings and
terrorist threats; and for the effective evacuation of Terminal areas to a planned
place of safety;
Improve inter-agency co-ordination and co-operation in the area of
communications, equipment and resources;
Identify from emergencies, exercises and best practice, any possible gaps, lack of
resilience or potential enhancements in the emergency procedures;
Ensure that roles and responsibilities of each agency in handling the media in
place, tested and exercised to ensure that the handling of an emergency is
projected in a professional and co-ordinated manner;
Ensuring that debriefs are carried out following emergencies so that actions and
plans can be compared and reviewed to facilitate continuous improvement of
Gatwick Emergency Plans;
Ensuring that when appropriate, reviews/remedial actions following exercises or
emergency debriefs are built into the Emergency Plans as appropriate.
20140701GatwickAeroManv5.0
49
Airside Safety Group
Chair Airside Standards Lead.
Secretary: As nominated by the Chair.
Membership: Membership shall comprise of the following participants, in addition to
the Chair (as required and available):
Head of Airside Compliance
Head of Airside Operations
Airside Operations Lead
Airside Improvement Lead
Airside Standards Co-ordinators
Airside Compliance team representatives
EHS department representatives
Airside operating company representatives
Frequency: Group meetings shall be held four times a year.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Group
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To review and monitor compliance with relevant EASA regulations and directives.
To ensure safety management system principles are applied to all aspects of airside
safety and operations To review and monitor Safety Performance Indicators
To agree and prioritise actions to improve safety performance
To track all agreed actions and audit recommendations to completion
To promote safety through the use of awareness posters, campaigns and other
communication channels
To share best practice on the airfield
To review and monitor airside standards on the airfield
Local Runway Safety Group
Purpose: To identify, implement, monitor and review actions as necessary to
ensure that the management of Gatwick Airport runway safety is in line
with the recommendations from Eurocontrol’s European Action Plan for
the Prevention of Runway Incursions.
Chair (Joint): Head of Airside Compliance;
Head of Safety, Security and Quality (ATC)
Secretary: As nominated by the Joint Chairs
20140701GatwickAeroManv5.0
50
Membership: Membership shall comprise of the following participants, in addition to
the Joint Chairs (as required and available):
ATC representatives;
Airline representatives;
Police
RFFS
Airside Operations Lead
Senior Airside Engineering Manager
CAA
UKFSC
Ground handling company representatives.
Airside Operations Training Dept representatives
BALPA
Frequency: Group meetings shall be held six times a year.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Group
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference
and performance, and make changes as required.
Safety Duties:
To review and monitor runway safety;
To agree and prioritise any required runway safety management actions;
To track all agreed actions and audit recommendations to completion.
Weekly Incident Review Meeting
Purpose: To discuss, review and monitor Gatwick Airport’s airfield safety incident
performance, identify trends, identify improvements to the available
safety information, and identify priorities for actions to reduce incidents.
Chair: Airside Standards Lead
Secretary: As nominated by the Chair.
Membership: Membership shall comprise of the following participants, in addition to
the Chair (as required and available):
Airside Compliance team representative;
Airside Operations duty team representatives;
Safety representative.
3rd Party Airside Operating Companies
Frequency: Meetings shall be held once a week.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all
20140701GatwickAeroManv5.0
51
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To review and monitor safety incident performance on the airfield;
To review and monitor safety incident trends on the airfield;
To review and monitor airfield safety information improvements;
To agree and prioritise any required incident management actions;
To track all agreed actions and audit recommendations to completion.
To raise and issue safety awareness communication within GAL and 3rd parties
Local Bird Hazard Management Group
Purpose: To review all aspects of Gatwick Airport’s wildlife hazard
management.
Chair: Airside Operations Lead
Secretary: As nominated by the Chair.
Membership: Membership shall comprise of the following participants, in addition to
the Chair (as required and available):
Airside Operations department representatives;
Airside Technical Assurance Controller
Airside Compliance team representatives;
Third party landscape contractor representatives;
Third party grass management contractor representatives
Frequency: Group meetings shall be held four times a year.
Prior notice of the meeting venue, time, date, agenda items, and any
supporting papers shall be provided to each member by the Secretary.
Reporting: The Secretary shall minute the proceedings and decisions of all Group
meetings, including recording the names of all those participants
present and in attendance.
The minutes shall be circulated promptly to all meeting attendees, and
any such other persons the Chair or Secretary shall deem appropriate.
Reviews: Members shall conduct an annual review of the terms of reference and
performance, and make changes as required.
Safety Duties:
To review and monitor wildlife strike incidents
To review and monitor wildlife hazard risk assessments
To review and monitor habitat management issues
To review and monitor wildlife hazard management training issues
To agree and prioritise any required wildlife hazard management actions
To track all agreed actions and audit recommendations to completion
20140701GatwickAeroManv5.0
52
2.2 Safety Management System (SMS)
2.2.1 Purpose
Gatwick Airport Limited (GAL) utilises an SMS framework, certified to ISO 14001, ISO 55001 and BSI OHSAS 18001, which is continuously reviewed, revised and audited to ensure that the latest safety standards are employed and adhered to by all parties on-site across the Gatwick estate. The SMS outlines and details the safety policies, responsibilities, and processes that have been established at Gatwick Airport to be in compliance with national and international legislation and regulations, including the Air Navigation Order (ANO) 2016, Regulation (EU) No. 139/2014, ICAO Annex 14: Volume 1, and ICAO 9859. The SMS applies to all GAL airfield personnel and those third party stakeholders working on the aerodrome. All GAL airfield personnel and third parties are required to be knowledgeable about the content of this SMS as it applies to their specific area of accountability and responsibility for safety.
2.2.2 Scope
The following elements are within the scope of the SMS:
The policies and management structures that are in place to direct and facilitate effective safety management at Gatwick Airport;
Details of the safety committees that oversee, assess, determine, and review safety management practices at Gatwick Airport;
Details of the safety interfaces and stakeholders who also hold responsibilities for safety at Gatwick Airport;
Details of the safety improvement targets that Gatwick Airport has identified for safety performance and achievement;
Details of the monitoring Gatwick Airport actively conducts to track and measure safety performance across the estate;
Details of the emergency response planning that Gatwick Airport has put in place to maintain the safety of its staff, stakeholders and passengers;
Details of the major safety documents that Gatwick Airport issues to the airport community and the management processes used to review, revise and promulgate those documents;
Details of the safety management methodologies Gatwick Airport employs to assess, identify, report and mitigate risk;
Details of the reporting and investigation systems and procedures Gatwick Airport uses to record and examine safety incident occurrences;
Details of the safety activities at Gatwick Airport that are contracted out to third party organisations;
Details of the safety competency frameworks that Gatwick Airport has in place to define the knowledge, skills and behaviours required of personnel with safety responsibilities on the estate;
Details of the types of changes at Gatwick Airport that are subject to a level of safety analysis;
20140701GatwickAeroManv5.0
53
Details of the communications channels and methodologies that Gatwick Airport employs to disseminate safety changes and safety critical information;
Details of the training and education that Gatwick Airport requires and/or provides to ensure that all airside personnel understand and are aware of all relevant and required safety policies and procedures.
Details of the procedures employed for the management and execution of responses to specific safety incidents at Gatwick Airport;
Details of the procedures employed for the management and execution of specific safety investigations at Gatwick Airport;
Details of the procedures employed for the management and execution of specific compliance activities at Gatwick Airport;
Details of the procedures employed for the management and execution of ‘business as usual’ airfield activities at Gatwick Airport.
2.2.3 Safety Policies & Management Structures
This chapter describes the key policies that convey GAL’s safety management standards and practices to GAL personnel and third parties working on the aerodrome, and the management structures who hold the key responsibilities for the identification, implementation and management of all airport safety activities. Safety Policies This section summarises the key policies that communicate the acceptable and agreed safety principles, behaviours and outcomes at Gatwick Airport. Aerodrome Safety Policy GAL’s overall commitment to EHS is detailed in its EHS Policy. This policy forms the basis of Gatwick’s SMS which is used to identify EHS risks, implement EHS controls, and improve EHS performance. A detailed overview of Gatwick’s SMS is available on the GAL EHS department’s EHS Management System page on Airspace. GAL, the Aerodrome Certificate Holder and Owner, recognises and accepts its responsibility to ensure (in so far as is reasonably practicable) that: The aerodrome and its aerodrome traffic zone are safe for use by aircraft; A safe working environment exists for GAL employees; A safe airfield environment exists for all airport staff, passengers, visitors and the general public whilst on the airport premises. In accordance with EASA ADR.OR.D005 Management System just-culture principles will be applied at the aerodrome. A copy of the Gatwick EHS Policy, signed by the CEO (the Accountable Manager for Gatwick Airport), is provided on the following pages. It is promulgated to all GAL personnel and third parties via ‘GAD: Gatwick’s EHS Policy’. It is also available on the GAL EHS department’s EHS Policies page on Airspace, and the Environment, Health and Safety page on gatwickairport.com
20140701GatwickAeroManv5.0
54
The GAL Executive Management Board (EMB) will monitor and regularly review, this policy and supporting management systems at our Managing Corporate Responsibility (MCR) and Environment, Health & Safety and Operational Resilience (EHSOR) forums ensuring it remains relevant to the company’s EHS risks/opportunities driving continuous performance improvement.
Details of the organisation and arrangements for delivering this policy are included in our company management systems. All personnel working for or on behalf of Gatwick Airport will be subject to this Policy.
20140701GatwickAeroManv5.0
55
Aircraft Operations Safety Policy
GAL will ensure that the highest priority is given to aerodrome safety. In order to achieve this, the following objectives have been set:
Manage aerodrome safety with the involvement of all users.
Continually evaluate and improve existing aerodrome safety processes. Work to enhance safety standards. Continually monitor achieved levels of safety.
In order to meet these objectives, GAL will undertake the following activities:
Implement and maintain an appropriate Safety Management System with a structure to manage, supervise and safely accomplish all aspects of aircraft operations which fall within the Aerodrome Certification area of responsibility.
Ensure the availability of sufficient staff who are experienced and/or trained and competent to meet the requirements above.
Ensure that the equipment and facilities provided are adequate to ensure that the aerodrome is safe for use by aircraft.
Liaise closely with the Civil Aviation Authority on all matters of airfield development and safety.
Ensure that Gatwick Airport meets at least the minimum standards set by regulatory bodies. Where standards are not externally set, standards appropriate to the intensity and type of operations conducted at Gatwick will be identified, evaluated and adopted.
Follow industry best practice: to achieve this Gatwick Airport uses wherever practicable the guidance in CAP 642 and other guidance material.
Ensure that the hazards arising from the activities of companies operating on the aerodrome relating to their own employees and to others who may be affected are identified, assessed, controlled and monitored. As procedures or circumstances/operations change the hazards will require to be re-assessed and updated.
Ensure that operating procedures and practices are evolved with due consideration and respect for environmental issues.
Ensure that standards, procedures, practices and related issues are effectively communicated to all relevant aircraft operators’ agencies and companies operating airside.
Operate a Continuous Improvement Programme within GAL and promote such a programme to other companies and agencies operating on the aerodrome.
Ensure that the procedures and performance of GAL staff and other companies operating on the aerodrome are monitored and audited, with results published and follow up actions recorded and agreed.
Whilst all operators and managers of companies that are engaged in aircraft operations have specific responsibility for safety, Gatwick Airport as the Aerodrome Certificate holder and landlord has responsibilities to ensure safety
20140701GatwickAeroManv5.0
56
on its premises. Whilst not detracting from or diminishing the responsibility of others, Gatwick Airport will require of all its service partners, contractors and tenants, to have written safe working and operating practices and will encourage the adoption of industry best practice. This will be achieved through a process of liaison and co-operation to ensure that the required standards are agreed and achieved. Third Parties Safety Policy
The term “third parties” includes the employees of companies, agencies, tenants and concessionaires authorised continuous airfield access for the conduct of their work. Hazards arising from the activities of third parties create risks for all airport users and GAL co-ordinates the management of the risks.
To meet the objective of providing third parties a safe airfield working environment, GAL undertakes to in so far as practicable to ensure the following:
All mechanical or electrical equipment provided by GAL is maintained to an established standard in order to ensure safe operation and conforms to legal requirements. When considered necessary minimum medical standards will be defined to which employees must meet in order to carry out specified tasks. Risks to health are identified and managed.
Essential information and appropriate standards are provided to assist with the safe conduct of work. All operations carried out airside by third parties will be monitored to observe compliance with safety rules and procedures. Monitoring will include at least annually an inspection of any property or facility leased from GAL and audit of safety, maintenance and training records. Training and/or advice will be provided for the following:
Procedures in case of emergencies Safe use of GAL equipment GAL procedures for working in airside areas Airside Driving
GAL values the views and involvement of all staff that work airside. To permit an exchange of information and expertise, safety related groups or committees are established as set out in this manual. Participation in these groups or committees is encouraged. A reporting system is established for all accidents or health and safety related incidents that occur while airside. Compliance with the requirements of this reporting system is compulsory. Gatwick Airport Ltd promotes a Just Culture, a culture that is fair and encourages open reporting of accidents and incidents. However, deliberate harm and wilful damaging behaviour is not tolerated. Everyone is encouraged to report accidents and incidents. Gatwick Airport Ltd also seeks to provide a safe airside working environment by ensuring that current legislation is met and control measures are employed to promote full compliance of airside legislation and rules..
20140701GatwickAeroManv5.0
57
Contractors Safety Policy
GAL requires that contractors, whether employed directly by GAL or by other companies, will conduct their operations in such a manner which ensures the health and safety of all airport users and staff and in accordance with all relevant Gatwick Airport Directives and Notices in force at the time.
Airport Users Safety Policy
Gatwick Airport’s policy is to ensure, so far as is reasonably practicable, the safety of all users of the airport including contractors and their staff, tenants and concessionaires and their staff, passengers, visitors and the general public whilst on Gatwick Airport premises.
Gatwick Airport will meet this responsibility, so far as is reasonably practicable, by the following means:
The provision of a comprehensive information service so that passengers/visitors are not inadvertently subjected to safety hazards.
The provision of adequate resources to ensure that all passengers are processed through the airport terminal with the minimum of risk.
Subject to the overriding requirements and regulations of The Home Office, UK Border Agency and the Gatwick Health Control Officer providing a Port Health facility so that immigrants and passengers returning from areas with endemic diseases are subjected to health controls and the risk of affecting airport staff and users is minimised. The maintenance of public areas in a safe condition. The maintenance of all equipment on which cargo, baggage and passengers/visitors may be conveyed, in an efficient and safe manner. Inform concessionaires, tenants and other airport users and their staff of the need to comply with the management policies. Ensure that Public Liability insurance cover is maintained. Inform contractors, when engaged in construction/development projects, that they and their staff have a duty of care, not to endanger the general public or themselves.
Gatwick Airport will ensure that all officers and staff are informed of their responsibilities in respect of the safety of persons other than staff who use the airport.
Safety Standards
Standards are established which can be grouped under the following headings:
Rules and Regulations for operating in airside areas. Adverse Weather Operations Qualifications for personnel working in airside areas. Environmental Health and Safety Equipment and vehicle standards. Airfield Projects and Work in Progress. Incident and Fault Reporting Communication.
20140701GatwickAeroManv5.0
58
Further details on these can be found in the Gatwick Airport Directives and Notices.
2.2.3 Safety Responsibilities of Key Safety Personnel
Chief Executive Officer
Ultimately responsible for the implementation of the Gatwick Environment, Health and Safety Policy
Gatwick Executive Management Team
Ensure that there are adequate resources for environment, health, safety and fire and that there is competent safety management within their business areas.
Heads of Departments
Clearly provide leadership, assign and document the staff responsibilities and accountabilities for environmental, health, safety and fire within their business units and ensure that monitoring takes place.
Managers
Manage and lead sections in accordance with the GAL documentation on Managing Corporate Responsibly System and at all times meet legal and social responsibilities.
Environment, Health and Safety Managers
Advise and provide support to line management and staff on all matters of environment, health, safety and fire. Also ensure effective links with enforcing authorities.
Environmental, Health and Safety Leads
Environmental, Health and Safety are actively involved in risk assessments, safety inspections and accident investigations.
Staff
All staff are required to have a duty of care to look after themselves and others whilst at work. All staff shall report any work hazard or defect that they feel is unsafe using the incident or the fault reporting systems.
2.2.4 Document Control
Gatwick Airport Airside Operations issues a number of safety related documents to promulgate safety information to relevant members of the airport community. Some documents are issued regularly (i.e. the Adverse Weather Plan is re-issued annually) whereas other documents are issued as and when they are required (i.e. Airport Directives) with a detailed expiry. There is also a requirement to keep up-to-date with various changes within the aviation industry, particularly regulatory documents. As such, many important documents are received and are assessed to ensure that changes to requirements are properly adopted.
20140701GatwickAeroManv5.0
59
The following table lists the major safety documents issued by Gatwick Airside Operations.
Document
Owner
Aerodrome Manual
Head of Airside Compliance
Gatwick Airport Directives
Airside Operations
General Advice Notices
Airside Operations
Airside Operations Technical Standards
Head of Airside Compliance
Airside Planning Technical Standards
Head of Airside Compliance
Aerodrome Safety Oversight Report
Head of Airside Compliance
Emergency Orders
Chief Fire Officer
Adverse Weather Plan
Airside Operations Lead
2.2.5 Record Keeping and Document Retention Period
GAL has a company-wide Information and Document Retention and Disposal Policy.
This procedure describes the method used to ensure that GAL Airside Operations records are properly archived and retained. GAL Airside Operations records are defined as a document that is required to be formally shared and retained.
The format of these documents shall include, but is not limited to:-
Paper products (documents, books, etc)
Electronic files (emails, folders, photographs, etc)
Hardware (discs, video, etc)
GAL has its own in-house Archive Storage Area where paper records, including confidential, are stored. The Archive Storage Area is coordinated and monitored by the GAL Post Room. Paper records are stored for a period of 6 years.
Electronic Records
All electronic information and documentation is stored in the Airside Operations shared drive, Box or Documentum indefinitely. Retention Periods The following table shows the document retention period.
20140701GatwickAeroManv5.0
60
Document
Retention Period
Certificates, As-built drawings and maps
Until rendered obsolete by a subsequent certification or assessment.
Action Trackers Retain electronic – 6 years Adverse Weather Plan Retain electronic – 6 years
Aerodrome Manual Retain electronic – 6 years Aerodrome Regulatory Inspections Retain electronic - 6 years Aerodrome Safeguarding Documentation Retain electronic - 6 years
AGL Flight Checks Retain electronic - 6 years
Audit Reports Retain electronic - 6 years
Audit Schedules Retain electronic - 6 years
Change Requests Retain electronic - 6 years
Daily Logs Retain electronic - 6 years Emergency Orders Retain electronic - 6 years Gatwick Airport Directives Retain electronic - 6 years Health and Safety Records Retain electronic - 6 years Incident, Accident, Near Miss Reports Retain electronic - 6 years Mandatory Occurrence Reports (MORs) Retain electronic - 6 years Manuals of Aerodrome Equipment or Systems employed at the Aerodrome
For as long as they are used at the Aerodrome Minimum 6 years
Minutes of Meetings Retain electronic – 6 years Non-conformance Reports Retain electronic - 6 years Obstacle Survey Data Retain electronic - 6 years
Operations in Winter Conditions Retain electronic and paper records – 6 years
Records of Training Retain electronic - 6 years Risk Assessments Retain electronic - 6 years Risk Register Retain electronic - 6 years
Runway Friction Retain electronic - 6 years
Standard Operating Procedures Retain electronic - 6 years Wildlife Hazard Management Data Retain electronic - 6 years
2.2.6 Safety Risk Management
GAL’s Risk Management Policy utilises a structured approach to identify and assess risk. This considers ‘top down’ and ‘bottom up’ inputs and is both internally and externally focused to ensure that GAL captures those risks present within the business and the impact of any risks that are outside of our direct control.
This means GAL are able to determine appropriate interventions to manage the risks identified. Risk mitigations are usually in the form of preventative controls or actions which prevent or reduce the frequency of a particular event occurring, or that minimise its impact. These controls may be delivered through improvements to our policies and processes, the capability of our people or our infrastructure and systems.
GAL maintains a business risk register which identifies and quantifies risk that can potentially affect its operation including aerodrome safety. Management of aerodrome safety risks is the responsibility of the Airside Operations Department and Airside Compliance ensure a departmental risk register is maintained and is continuously monitored, managed and report any risks from its business activities.
The GAL Risk Management Procedure v0.8 documents the risk management process and is attached as an appendix to the Aerodrome Manual.
20140701GatwickAeroManv5.0
61
2.2.7 Monitoring of Safety Actions and Risk Mitigation
A monthly aerodrome safety oversight meeting is held, attended by members of GAL Airside Operations. This group, chaired by the Head of Airside Compliance, meets on a monthly basis. The group consists of senior managers from all sections of Airside Operations, Airport Fire Service and Airfield Engineering to ensure performance is being delivered to achieve a robust Safety Management System. The objectives are as follows:
Oversight Safety Management Review Aerodrome Safety Performance Trend analysis and reporting To identify priorities for action to improve performance
2.2.8 Safety Reporting
Airside incidents and near misses are recorded on the PRIME database. They are then reviewed at a weekly incident meeting, chaired by the Airside Standards Improvement Lead. All incidents are investigated and closed out, with any learning points shared with relevant parties. In some cases a Safety Alert will be issued to raise awareness of specific safety related issues.
2.2.9 Emergency Response Planning
As part of the aerodrome’s contingency planning arrangements Emergency Orders are produced which set out procedures for the alerting of the various emergency services and for the co-ordination of their activities.
The Resilience Planning Group, which is a multi- agency sub-committee of the Sussex Resilience Forum (SRF) and is chaired jointly by Gatwick Airport and Sussex Police meets every six weeks and ensures that Gatwick, as a category 2 responder (under the Civil Contingencies Act) is aligned and embedded within the local and national response. Gatwick is also represented at other relevant SRF committees ensuring that area, countywide and local plans and responses are aligned to ensuring an optimum response. The relevant Gatwick plans are held by the SRF and are available through the secure database to the relevant responding agencies. This relationship ensures that the airport wide plans are reviewed and prepared and signed off by all the parties that may have to respond.
Gatwick for all types of events has a well-established and developed command and control structure. This is modelled on the three tier structure of Gold (strategic), Silver (tactical) and Bronze (operational). There are clearly defined roles within each tier and a three year (rolling) training programme running, (provided by an external partner) to ensure a common approach; this also entails a multi-agency simulation exercise to verify the training (and selected plans either airport wide, functional or both). The three tier model is well understood, trained and rehearsed.
The Command and Control structure allows the inclusion of other stakeholders to facilitate a co-ordinated multi –agency response. Both our Silver and Bronze Commanders have been trained to chair these groups and obtain the best information for managing an incident. This has involved ensuring that all parties are familiar with the process and use of the relevant tools such as the Commonly Recognised Information Picture (CRIP) and Situation Reports (SitRep).
All levels within the Command and Control Structure receive bespoke training sessions, however, wherever possible these skills are exercised and Gatwick
20140701GatwickAeroManv5.0
62
hosts at least one major multi-agency simulation exercise annually. Additionally where appropriate joint exercising/coaching is utilised and in this regard we have an excellent relationship with Sussex Police, where classroom and live exercising is regularly undertaken together especially at Bronze and Silver level.
Training, testing, coaching and exercising is carried out in-house and in multi-agency environments, in a variety of formats, desktop, simulation and live exercises which can involve hundreds of people to fully test the robustness of the plans. All exercises are debriefed and the improvements, actions and amendments are tracked through the Resilience Planning Group and only signed off when complete.
2.2.10 Management of Change
The EASA Acceptable Means of Compliance (AMC) document AMC1 ADR.OR.B.040 and associated Guidance Material (GM) GM1 ADR.OR.B.040 defines the Aerodrome Operator’s requirement to notify the Competent Authority of changes to the aerodrome or its operation. The Civil Aviation Authority (CAA) is the Competent Authority for Gatwick Airport Limited (GAL) and the CAA document CAP1168, ADR.OR.B.040 further defines and clarifies the EASA requirements.
These documents define where changes to the aerodrome or its operation require Prior Approval from the Competent Authority plus outline the Aerodrome Operator’s requirements in relation to changes that are deemed not to require Prior Approval.
The GAL Change Control Procedures document details the CAA approved procedure that shall be followed when carrying out changes at Gatwick Airport based on the requirements outlined above. This document is an attachment to the Aerodrome Manual.
2.2.11 Safety Promotion
The Airside Standards Lead, chairs the quarterly Airside Safety Group meetings. The group consists of representatives from the airside operating companies who have a particular interest in airside operational training and health and safety. As part of some meetings, a joint FOD walk/inspection, covering a specific area, is undertaken by GAL Airside Operations and third party airside operators.
Airside safety nomination scheme in operation, to recognise individuals who have taken action to prevent an incident taking place.
Posters to raise awareness of specific safety events are issued to the airside community, as required.
GAL Airside Operations hold Safety Days with involvement from the airside community. GAL and Police hold joint events to raise awareness of airside safety related issues.
2.2.12 Safety Management System Outputs Action trackers Aerodrome Safety Oversight Report Airside Safety Group Audit findings / corrective measures Gatwick Airport Directives
20140701GatwickAeroManv5.0
63
Safety Alerts Safety Posters Staff briefings 2.3 Compliance Monitoring System (CMS)
The regulation
ADR.OR.D.005(b)(11) – Compliance Monitoring
The implementation and use of a compliance monitoring process should enable the aerodrome operator to monitor compliance with the relevant requirements of this Part, Part-ADR.OPS, as well as any other applicable regulatory requirements, or requirements established by the aerodrome operator.
The compliance monitoring process should be properly implemented, maintained and continually reviewed and improved as necessary.
Compliance monitoring should be structured according to the size of organisation and the complexity of the activities to be monitored, including those which have been subcontracted.
Compliance monitoring should include a feedback system of findings to the accountable manager to ensure effective implementation of corrective actions as necessary.
The aerodrome operator should specify the basic structure of the compliance monitoring applicable to the activities conducted.
Allocation of Duties and Responsibilities
Airside Compliance Team
The Airside Compliance Team is responsible for the delivery of the CMS and have access to all subjects that require compliance monitoring.
The Airside Compliance Team acts independently of other Managers within the organisation and the Head of Airside Compliance has direct access to the Accountable Manager and to appropriate management for safety matters and is responsible to the Accountable Manager.
Airside Operations Department
The Airside Operations Department has the prime responsibility for carrying out monitoring, inspections and audits of the Aerodrome. GAL operate a three tier monitoring and inspection system to ensure the highest standards of safety are maintained for all airport users and customers and GAL are fully aware of the current condition and serviceability state of all Aerodrome facilities to ensure compliance with the Standards and Recommended Practices of ICAO Annex 14, and the requirements of Regulation (EC) No 216/2008.
Terminology
See Part A - General information, administration and control of the aerodrome manual. Para 0.1.4 Definition of Terms needed for the Use of the Aerodrome Manual Specified Activity Standards
Specified activity standard audits are carried out monthly and are programmed over a 3 year cycle. The specified standard activities are listed below.
20140701GatwickAeroManv5.0
64
Management of Change
Use of Alcohol
Compliance Monitoring
Contracted Activities
Co-ordination with Other Organisations
Personnel Requirements
Prevention of Fire
Record Keeping
Training and Proficiency
Aerodrome Monitoring and Inspection
Aerodrome Maintenance
Low Visibility Operations
Wildlife Management
Obstacles and Flight Procedures
Occurrence Reporting
Operations of Vehicles
Rescue and Fire Fighting Services
Safety Directives
Safety Programmes and Committees
Safety Reporting System
Surface Movement Guidance and Control Systems
Winter and Adverse Weather
Apron Management
Aerodrome Manual
Aerodrome Safeguarding
Demonstration of Compliance
Findings and Corrective Actions
Fuel Quality
Management System
Emergency Planning
Description of the organisation of the aerodrome operator
See Part A - General information, administration and control of the aerodrome manual.
CMS Schedule
The Head of Airside Compliance ensures compliance monitoring audits are conducted as per the CMS schedule and audit reports and records are maintained.
The Airside Compliance Team have a defined compliance monitoring audit schedule which allows for unscheduled audits when trends are identified. Audit findings are tracked to verify that corrective action has been carried out and that it was effective and completed.
Airside Compliance will review the results of its compliance monitoring activities, in order to adapt the calendar period within which an audit or a series of audits will be conducted, to cover the whole aerodrome. This calendar period is aligned with the competent authority’s oversight planning cycle.
20140701GatwickAeroManv5.0
65
Compliance Monitoring Activities
Activity Frequency
QB1 Management of Change QB2 Use of Alcohol QB3 Compliance Monitoring QB4 Contracted Activities QB5 Co-ordination with Other Organisations QB6 Personnel Requirements QB7 Prevention of Fire QB8 Record Keeping QB9 Training and Proficiency QB10 Aerodrome Monitoring and Inspection QB11 Aerodrome Maintenance QB12 Low Visibility Operations QB13 Wildlife Management QB14 Obstacles and Flight Procedures QB15 Occurrence Reporting QB16 Operation of Vehicles QB17 Rescue & Fire Fighting Services QB18 Safety Directives QB19 Safety Programmes & Committees QB20 Safety Reporting System QB21 Surface Movement Guidance and Control Systems QB22 Winter and Adverse Weather QB23 Apron Management QB24 Aerodrome Manual QB25 Aerodrome Safeguarding QB26 Demonstration of Compliance QB27 Findings and Corrective Actions QB28 Fuel Quality QB29 Management System QB30 Emergency Planning QB31 Aerodrome Data Quality Requirements
As per CMS schedule
Aerodrome Annual Audit Annual
Review of Compliance Monitoring Activities Annual
20140701GatwickAeroManv5.0
66
Compliance Monitoring System Schedule – Year 1
Activity
Audit Month
Management of Change January
Use of Alcohol February
Compliance Monitoring March
Contracted Activities April
Co-ordination with Other Organisations May
Personnel Requirements June
Prevention of Fire July
Record Keeping August
Training and Proficiency September
Aerodrome Monitoring and Inspection October
Spare November
Review of Year 1 Audit Schedule December
Compliance Monitoring System Schedule – Year 2
Activity
Audit Month
Aerodrome Maintenance January
Low Visibility Operations February
Wildlife Management March
Obstacles and Flight Procedures April
Occurrence Reporting May
Operation of Vehicles June
Rescue and Fire Fighting Services July
Safety Directives August
Safety Programmes and Committees September
Safety Reporting System October
Spare November
Review of Year 2 Audit Schedule December
20140701GatwickAeroManv5.0
67
Compliance Monitoring System Schedule – Year 3
Activity
Audit Month
Surface Movement Guidance and Control Systems January
Winter and Adverse Weather February
Apron Management March
Aerodrome Manual April
Aerodrome Safeguarding May
Demonstration of Compliance June
Findings and Corrective Actions July
Fuel Quality August
Management System September
Emergency Planning October
Aerodrome Data Quality Requirements November
Review of Year 3 Audit Schedule December
Audit Procedures
The structure of the Compliance Monitoring Activities has taken into consideration the size of organisation and the complexity of the activities to be monitored, including those which have been subcontracted. The detail of all the activities are clearly defined within the CMS schedule. All Compliance Monitoring Audits are provided with a reference code. See Audit reference table below.
20140701GatwickAeroManv5.0
68
Audit Title Reference
Aerodrome Annual Audit AAA001
Management of Change ACMA001
Use of Alcohol ACMA002
Compliance Monitoring ACMA003
Contracted
Activities
ACMA004
Co-ordination with Other Organisations ACMA005
Personnel Requirements ACMA006
Prevention of Fire ACMA007
Record Keeping ACMA008
Training and Proficiency ACMA009
Aerodrome Monitoring and Inspection ACMA010
Aerodrome Maintenance ACMA011
Low Visibility Operations ACMA012
Wildlife Management ACMA013
Obstacles and Flight Procedures ACMA014
Occurrence Reporting ACMA015
Operation of Vehicles ACMA016
Rescue & Fire Fighting Services ACMA017
Safety Directives ACMA018
Safety Programmes & Committees ACMA019
Safety Reporting System ACMA020
Surface Movement Guidance and Control Systems ACMA021
Winter and Adverse Weather ACMA022
20140701GatwickAeroManv5.0
69
Audit Title Reference
Apron Management ACMA023
Aerodrome Manual ACMA024
Aerodrome Safeguarding ACMA025
Demonstration of Compliance ACMA026
Findings and Corrective Actions ACMA027
Fuel Quality ACMA028
Management System ACMA029
Emergency Planning ACMA030
Aerodrome Data Quality Requirements
ACMA031
All Compliance Monitoring Audit reports are stored electronically for a maximum of 6 years. The differing types of Compliance Monitoring audits undertaken are described as follows:
Aerodrome Annual Audit
An Aerodrome Annual Compliance audit of the Airside Operations Team, their operational procedures, systems and facilities is carried out by the Airside Compliance Team to examine the department’s compliance in accordance EASA Aerodrome Certification.
Airside Compliance Monitoring Audit (ACMA)
Airside Compliance Monitoring Audits are conducted by Airside Compliance in accordance with CMS audit schedule. The compliance monitoring activities subject to an audit are defined within the CMS schedule. The ACMA delivers an audit programme that monitor’s compliance with the relevant requirements of this Part, Part-ADR.OPS, as well as any other applicable regulatory requirements, or requirements established by Gatwick Airport Ltd.
Unscheduled Audits
Unscheduled audits can be undertaken by the Airside Compliance Team following observations or findings from Compliance Monitoring, receipt of safety reports from airside operators, Airside Operations confidential reporting system and safety related sources such as CHIRP.
Definition of Findings
All Compliance Monitoring Audit reports contain 2 levels of findings and/or observation;
A Level 1 finding is issued when any significant non-compliance is detected
A Level 2 finding is issued when any non-compliance is detected
An Observation may be raised where there is potential for future non-compliance if no action is taken, or where we wish to indicate an opportunity for safety improvement or
20140701GatwickAeroManv5.0
70
something that is not good practice. Corrective action is not obligatory for an observation, but acknowledgement and the identification of any intended action is expected.
Follow Up and Corrective Actions.
The follow up and a corrective actions from the Compliance Monitoring audits of the Airside Operations aerodrome specified activities, are the responsibility of Airside Operations. They retain ultimate responsibility for the effective implementation and follow-up of all corrective actions contained within the audit report. All Compliance audit reports specify timescales for completion of audit findings.
Reporting Procedures
Compliance Monitoring Audit reports will be issued to the Head of Airside within 10 working days. It will also be issued the Accountable Manager, COO, Head of EHS and Airside Operations.
The Aerodrome Oversight and Safety Governance monthly meeting reviews the action status of the audit findings and will request updates from audit action owners as necessary.
Training
The Airside Compliance Team responsible for managing the compliance monitoring are required to have successfully completed an Audit training programme. The training shall include requirements of compliance monitoring, manuals and procedures related to the task, audit techniques, reporting, and recording. Airside Compliance auditors will maintain their competence through delivery of the Compliance Audit schedule.
2.4 Quality Management System for Aeronautical Data and Related Procedures
Promulgation of Changes
Information regarding agreements and existing practices is contained in either the UK AIP or, for issues directly controlled by the Air Traffic control provider, in the Manual of Air Traffic Services – Part 2. Responsibility for the content and accuracy of these documents lies with the Head of Airside Compliance and Head of Operations, ATC respectively.
It is GAL policy that changes to such agreements and practices is agreed after consultation with all affected parties. This is achieved either through direct consultation or through the relevant safety committee.
The GAL Head of Airside Operations is responsible for ensuring adequate consultation and assessment of the safety implications of any changes.
Aeronautical information
Permanent information regarding the operating conditions is published in the UKAIP, with temporary information promulgated using UK NOTAMS and the Aeronautical Information Service. In accordance with EASA ADR.OPS.A005 and guidance CAP 1054 Aeronautical Information Management.
GAL Airside Operations and Airside Compliance subscribe to the Competent Authority system to receive various notifications, including Safety Instructions / Information Notices.
20140701GatwickAeroManv5.0
71
The Head of Airside Compliance is responsible for notifying the Competent Authority of any errors or omissions in the published aerodrome information and of any impending changes in the aerodrome or its facilities likely to affect this information.
Accountability for ensuring the UK AIP is updated lies with the Head of Airside Compliance.
It is GAL policy that up-to-date, accurate information about the aerodrome facilities and operational state is maintained at all times.
Whenever any of the following conditions occur or can be anticipated and are of operational significance, GAL Airside Operations will inform the Competent Authority so that action can be taken to amend the UK AIP and / or to promulgate the change by NOTAM / SNOWTAM.
Changes in the availability of the manoeuvring area and changes in the runway declared distances;
significant changes in aerodrome lighting and other visual aids.; presence or removal of temporary obstructions to aircraft operation in the manoeuvring area; presence or removal of hazardous conditions due to snow, ice or slush on the movement area;
presence of airborne hazards to air navigation; interruption, return to service, or major changes to rescue facilities and fire fighting services available; failure or return to operation of hazard beacons and obstruction lights on or in the vicinity of the aerodrome; erection or removal of obstructions to air navigation, and erection or removal of significant obstacles in take-off, climb or approach areas; air displays, air races, parachute jumping, or any unusual aviation activity along with any other information of operational significance.
Competent Authority Safety Instructions / Notices
GAL Airside Compliance have a process to ensure Safety Instructions / Information Notices are disseminated, within GAL and to third parties, as relevant
Safety Instruction / Information Notice received Saved to folder electronically Subject matter checked for decision on who to disseminate to Email sent to relevant parties with link to folder and Safety Instruction / Information Notice Safety Instruction / Information Notice number, date of issue, subject and who it has been emailed to, is recorded in a Word table, by Airside Compliance.
Safety Instructions / Information Notices are also included on the monthly Airside Safety Governance meeting agenda and quarterly Airside Safety Group meeting agenda, where relevant and copies included with the notes from the meeting.
2.5 Accident and Mandatory Reporting Polices Definitions:-
Incident – any unplanned occurrence that leads to damage to property, plant or equipment. Accidents – are undesired and unplanned events which may cause personal injury, damage to property or equipment, or loss of output, or all three. Dangerous occurrence – these are events or situations that could harm employees at work in such a way that there is a legal requirement to report them. If something happens
20140701GatwickAeroManv5.0
72
which does not result in a major injury, but clearly could have done, it may be classed as a dangerous occurrence. Near miss – any unplanned occurrence (except Dangerous occurrence) that does not lead to injury of personnel or damage to property, plant or equipment, but may have done in different circumstances. Hazard - a hazard can be defined as a situation with the potential to cause harm or danger. GAL Incident / Accident / Near Miss Reporting System Airside incidents, accidents and near misses are recorded on the PRIME electronic database. Voluntary Reporting
Your safety while working at Gatwick is our number one priority The airfield can be a hazardous and dangerous place to work. Gatwick Airport leads and sets standards for ensuring a safe airport operation, but everyone working here has a role to play in delivering safety through their behaviour, care and attention. We have a voluntary reporting tool which is a confidential reporting system where you can raise any safety related issues of concern. If you have witnessed an incident, seen a potential hazard, spotted unsafe working practice or want to let us know about any other safety issue on the airfield, then please let us know by completing our form. You can also upload an image of what you've seen. If you would like a reply, then please include your email address too. Voluntary reports may be made on-line, using the voluntary report, accessible at business.gatwickairport.com
Mandatory Occurrence Reporting
EU Regulation No 376/2014 Mandatory Occurrence Reporting system (MOR)
requires the reporting of hazardous or potentially hazardous incidents or occurrences
affecting an aircraft. An occurrence means any safety-related event which endangers
or which, if not corrected or addressed, could endanger an aircraft, its occupants or
any other person.
The Gatwick Airport Directive - Mandatory Occurrence Reporting (MOR) – (EU) 376 2014, describes the reporting system. All reports will be submitted as required in accordance with the above regulation, within 72 hours to the Competent Authority.
The following categories of activities are required to report occurrences and comply with EASA Regulation (EU) No 376/2014.
ANNEX I - OCCURRENCES RELATED TO THE OPERATION OF THE AIRCRAFT AIR OPERATIONS Flight preparation
Use of incorrect data or erroneous entries into equipment used for navigation or performance calculations which has or could have endangered the aircraft, its occupants or any other person.
Carriage or attempted carriage of dangerous goods in contravention of applicable legislations including incorrect labelling, packaging and handling of dangerous goods.
20140701GatwickAeroManv5.0
73
Aircraft preparation Incorrect fuel type or contaminated fuel.
Missing, incorrect or inadequate De-icing/Anti-icing treatment. Take-off and landing
Taxiway or runway excursion.
Actual or potential taxiway or runway incursion. Final Approach and Take-off Area (FATO) incursion. Any rejected take-off.
Inability to achieve required or expected performance during take-off, go-around or landing.
Actual or attempted take-off, approach or landing with incorrect configuration setting.
Tail, blade/wingtip or nacelle strike during take-off or landing.
Approach continued against air operator stabilised approach criteria.
Continuation of an instrument approach below published minimums with
inadequate visual references.
Precautionary or forced landing. Short and long landing. Hard landing. Any phase of flight Loss of control.
Aircraft upset, exceeding normal pitch attitude, bank angle or airspeed inappropriate for the conditions.
Level bust.
Activation of any flight envelope protection, including stall warning, stick shaker, stick pusher and automatic protections.
Unintentional deviation from intended or assigned track of the lowest of twice
the required navigation performance or 10 nautical miles. Exceedance of aircraft flight manual limitation.
Operation with incorrect altimeter setting.
Jet blast or rotor and prop wash occurrences which have or could have endangered the aircraft, its occupants or any other person.
Misinterpretation of automation mode or of any flight deck information provided to the flight
crew which has or could have endangered the aircraft, its occupants or any other person.
20140701GatwickAeroManv5.0
74
Other types of occurrences Unintentional release of cargo or other externally carried equipment. Loss of situational awareness (including environmental, mode and system awareness, spatial disorientation, and time horizon).
Any occurrence where the human performance has directly contributed to or could have
contributed to an accident or serious incident.
TECHNICAL OCCURRENCES
Structure and Systems Loss of any part of the aircraft structure in flight. Loss of a system. Loss of redundancy of a system. Leakage of any fluid which resulted in a fire hazard or possible hazardous contamination
of aircraft structure, systems or equipment, or which has or could have endangered the aircraft, its occupants or any other person.
Fuel system malfunctions or defects, which had an effect on fuel supply and/or distribution. Malfunction or defect of any indication system when this results in misleading indications
to the crew. Abnormal functioning of flight controls such as asymmetric or stuck/jammed flight controls
(for example: lift (flaps/slats), drag (spoilers), attitude control (ailerons, elevators, rudder) devices).
Propulsion (including engines, propellers and rotor systems) and auxiliary power units (APUs) Failure or significant malfunction of any part or controlling of a propeller, rotor or
powerplant. Damage to or failure of main/tail rotor or transmission and/or equivalent systems. Flameout, in-flight shutdown of any engine or APU when required (for example: ETOPS
(Extended range Twin engine aircraft Operations), MEL (Minimum Equipment List)). Engine operating limitation exceedance, including overspeed or inability to control the
speed of any high-speed rotating component (for example: APU, air starter, air cycle machine, air turbine motor, propeller or rotor).
Failure or malfunction of any part of an engine, powerplant, APU or transmission resulting
in any one or more of the following: thrust-reversing system failing to operate as commanded; inability to control power, thrust or rpm (revolutions per minute); non-containment of components/debris.
20140701GatwickAeroManv5.0
75
INTERACTION WITH AIR NAVIGATION SERVICES (ANS) AND AIR TRAFFIC MANAGEMENT (ATM) Unsafe ATC (Air Traffic Control) clearance. Prolonged loss of communication with ATS (Air Traffic Service) or ATM Unit.
Conflicting instructions from different ATS Units potentially leading to a loss of separation. Misinterpretation of radio-communication which has or could have endangered the aircraft, its occupants or any other person. Intentional deviation from ATC instruction which has or could have endangered the aircraft, its occupants or any other person.
EMERGENCIES AND OTHER CRITICAL SITUATIONS Any event leading to the declaration of an emergency (‘Mayday’ or ‘PAN call’). Any burning, melting, smoke, fumes, arcing, overheating, fire or explosion.
Contaminated air in the cockpit or in the passenger compartment which has or could have endangered the aircraft, its occupants or any other person.
Failure to apply the correct non-normal or emergency procedure by the flight or cabin crew to deal with an emergency.
Use of any emergency equipment or non-normal procedure affecting in-flight or landing performance.
Failure of any emergency or rescue system or equipment which has or could have endangered the aircraft, its occupants or any other person.
Uncontrollable cabin pressure. Critically low fuel quantity or fuel quantity at destination below required final reserve fuel. Any use of crew oxygen system by the crew.
Incapacitation of any member of the flight or cabin crew that results in the reduction below the minimum certified crew complement.
Crew fatigue impacting or potentially impacting their ability to perform safely their flight duties.
EXTERNAL ENVIRONMENT AND METEOROLOGY A collision or a near collision on the ground or in the air, with another aircraft, terrain or obstacle. ACAS RA (Airborne Collision Avoidance System, Resolution Advisory). Activation of genuine ground collision system such as GPWS (Ground Proximity Warning System)/TAWS (Terrain Awareness and Warning System) ‘warning’. Wildlife strike including bird strike. Foreign object damage/debris (FOD). Unexpected encounter of poor runway surface conditions.
20140701GatwickAeroManv5.0
76
Wake-turbulence encounters. Interference with the aircraft by firearms, fireworks, flying kites, laser illumination, high powered lights, lasers, Remotely Piloted Aircraft Systems, model aircraft or by similar means. A lightning strike which resulted in damage to the aircraft or loss or malfunction of any aircraft system. A hail encounter which resulted in damage to the aircraft or loss or malfunction of any aircraft system. Severe turbulence encounter or any encounter resulting in injury to occupants or deemed to require a ‘turbulence check’ of the aircraft. A significant wind shear or thunderstorm encounter which has or could have endangered the aircraft, its occupants or any other person. Icing encounter resulting in handling difficulties, damage to the aircraft or loss or malfunction of any aircraft system. Volcanic ash encounter.
SECURITY
Bomb threat or hijack. Difficulty in controlling intoxicated, violent or unruly passengers. Discovery of a stowaway.
ANNEX II - OCCURRENCES RELATED TO TECHNICAL CONDITIONS, MAINTENANCE AND REPAIR OF THE AIRCRAFT MAINTENANCE AND CONTINUING AIRWORTHINESS MANAGEMENT
Serious structural damage (for example: cracks, permanent deformation, delamination, debonding, burning, excessive wear, or corrosion) found during maintenance of the aircraft or component.
Serious leakage or contamination of fluids (for example: hydraulic, fuel, oil, gas or other fluids).
Failure or malfunction of any part of an engine or powerplant and/or transmission resulting in any one or more of the following: non-containment of components/debris failure of the engine mount structure. Damage, failure or defect of propeller, which could lead to in-flight separation of the propeller or any major portion of the propeller and/or malfunctions of the propeller control. Damage, failure or defect of main rotor gearbox/attachment, which could lead to in-flight separation of the rotor assembly and/or malfunctions of the rotor control.
20140701GatwickAeroManv5.0
77
Significant malfunction of a safety-critical system or equipment including emergency system or equipment during maintenance testing or failure to activate these systems after maintenance. Incorrect assembly or installation of components of the aircraft found during an inspection or test procedure not intended for that specific purpose. Wrong assessment of a serious defect, or serious non-compliance with MEL and Technical logbook procedures. Serious damage to Electrical Wiring Interconnection System (EWIS). Any defect in a life-controlled critical part causing retirement before completion of its full life. The use of products, components or materials, from unknown, suspect origin, or unserviceable critical components. Misleading, incorrect or insufficient applicable maintenance data or procedures that could lead to significant maintenance errors, including language issue. Incorrect control or application of aircraft maintenance limitations or scheduled maintenance. Releasing an aircraft to service from maintenance in case of any non-compliance which endangers the flight safety. Serious damage caused to an aircraft during maintenance activities due to incorrect maintenance or use of inappropriate or unserviceable ground support equipment that requires additional maintenance actions. Identified burning, melting, smoke, arcing, overheating or fire occurrences. Any occurrence where the human performance, including fatigue of personnel, has directly contributed to or could have contributed to an accident or a serious incident. Significant malfunction, reliability issue, or recurrent recording quality issue affecting a flight recorder system (such as a flight data recorder system, a data link recording system or a cockpit voice recorder system) or lack of information needed to ensure the serviceability of a flight recorder system.
ANNEX III - OCCURRENCES RELATED TO AIR NAVIGATION SERVICES AND FACILITIES
AIRCRAFT-RELATED OCCURRENCES A collision or a near collision on the ground or in the air, between an aircraft and another aircraft, terrain or obstacle, including near-controlled flight into terrain (near CFIT). Separation minima infringement. Inadequate separation. ACAS RAs. Wildlife strike including bird strike. Taxiway or runway excursion. Actual or potential taxiway or runway incursion. Final Approach and Take-off Area (FATO) incursion.
20140701GatwickAeroManv5.0
78
Aircraft deviation from ATC clearance. Aircraft deviation from applicable air traffic management (ATM) regulation: aircraft deviation from applicable published ATM procedures airspace infringement including unauthorised penetration of airspace
deviation from aircraft ATM-related equipment carriage and operations, as mandated by applicable regulations.
Call sign confusion related occurrences.
DEGRADATION OR TOTAL LOSS OF SERVICES OR FUNCTIONS Inability to provide ATM services or to execute ATM functions: Inability to provide air traffic services or to execute air traffic services functions
Inability to provide airspace management services or to execute airspace management functions
inability to provide air traffic flow management and capacity services or to execute air traffic flow management and capacity functions.
Missing or significantly incorrect, corrupted, inadequate or misleading information from any support service including relating to poor runway surface conditions. Failure of communication service. Failure of surveillance service. Failure of data processing and distribution function or service. Failure of navigation service. Failure of ATM system security which had or could have a direct negative impact on the safe provision of service. Significant ATS sector/position overload leading to a potential deterioration in service provision. Incorrect receipt or interpretation of significant communications, including lack of understanding of the language used, when this had or could have a direct negative impact on the safe provision of service. Prolonged loss of communication with an aircraft or with other ATS unit.
OTHER OCCURRENCES
Declaration of an emergency (‘Mayday’ or ‘PAN’ call). Significant external interference with Air Navigation Services (for example radio broadcast stations transmitting in the FM band, interfering with ILS (instrument landing system), VOR (VHF Omni Directional Radio Range) and communication). Interference with an aircraft, an ATS unit or a radio communication transmission including by firearms, fireworks, flying kites, laser illumination, high-powered lights lasers, Remotely Piloted Aircraft Systems, model aircraft or by similar means. Fuel dumping.
20140701GatwickAeroManv5.0
79
Bomb threat or hijack. Fatigue impacting or potentially impacting the ability to perform safely the air navigation or air traffic duties. Any occurrence where the human performance has directly contributed to or could have contributed to an accident or a serious incident.
ANNEX IV - OCCURRENCES RELATED TO AERODROMES AND GROUND SERVICES Aircraft- and obstacle-related occurrences
A collision or near collision, on the ground or in the air, between an aircraft and another aircraft, terrain or obstacle.
Wildlife strike including bird strike. Taxiway or runway excursion. Actual or potential taxiway or runway incursion. Final Approach and Take-off Area (FATO) incursion or excursion. Aircraft or vehicle failure to follow clearance, instruction or restriction while operating on the movement area of an aerodrome (for example: wrong runway, taxiway or restricted part of an aerodrome). Foreign object on the aerodrome movement area which has or could have endangered the aircraft, its occupants or any other person.
Presence of obstacles on the aerodrome or in the vicinity of the aerodrome which are not published in the AIP (Aeronautical Information Publication) or by NOTAM (Notice to Airmen) and/or that are not marked or lighted properly. Push-back, power-back or taxi interference by vehicle, equipment or person. Passengers or unauthorised person left unsupervised on apron. Jet blast, rotor down wash or propeller blast effect. Declaration of an emergency (‘Mayday’ or ‘PAN’ call).
Degradation or total loss of services or functions
Loss or failure of communication between:
aerodrome, vehicle or other ground personnel and air traffic services unit or apron management service unit
apron management service unit and aircraft, vehicle or air traffic services unit.
Significant failure, malfunction or defect of aerodrome equipment or system which has or could have endangered the aircraft or its occupants.
Significant deficiencies in aerodrome lighting, marking or signs. Failure of the aerodrome emergency alerting system. Rescue and firefighting services not available according to applicable requirements.
20140701GatwickAeroManv5.0
80
Other occurrences
Fire, smoke, explosions in aerodrome facilities, vicinities and equipment which has or could have endangered the aircraft, its occupants or any other person.
Aerodrome security related occurrences (for example: unlawful entry, sabotage, bomb threat).
Absence of reporting of a significant change in aerodrome operating conditions which has or could have endangered the aircraft, its occupants or any other person.
Missing, incorrect or inadequate de-icing/anti-icing treatment. Significant spillage during fuelling operations.
Loading of contaminated or incorrect type of fuel or other essential fluids (including oxygen, nitrogen, oil and potable water).
Failure to handle poor runway surface conditions.
Any occurrence where the human performance has directly contributed to or could have contributed to an accident or a serious incident.
Aircraft and aerodrome-related occurrences
A collision or near collision, on the ground or in the air, between an aircraft and another aircraft, terrain or obstacle.
Runway or taxiway incursion. Runway or taxiway excursion.
Significant contamination of aircraft structure, systems and equipment arising from the carriage of baggage, mail or cargo.
Push-back, power-back or taxi interference by vehicle, equipment or person.
Foreign object on the aerodrome movement area which has or could have endangered the aircraft, its occupants or any other person.
Passengers or unauthorised person left unsupervised on apron.
Fire, smoke, explosions in aerodrome facilities, vicinities and equipment which has or could have endangered the aircraft, its occupants or any other person.
Aerodrome security-related occurrences (for example: unlawful entry, sabotage, bomb threat).
Degradation or total loss of services or functions
Loss or failure of communication with aircraft, vehicle, air traffic services unit or apron management service unit. Significant failure, malfunction or defect of aerodrome equipment or system which has or could have endangered the aircraft or its occupants.
Significant deficiencies in aerodrome lighting, marking or signs.
Ground handling specific occurrences
Incorrect handling or loading of passengers, baggage, mail or cargo, likely to have a significant effect on aircraft mass and/or balance (including significant errors in loadsheet calculations).
20140701GatwickAeroManv5.0
81
Boarding equipment removed leading to endangerment of aircraft occupants.
Incorrect stowage or securing of baggage, mail or cargo likely in any way to endanger the aircraft, its equipment or occupants or to impede emergency evacuation.
Transport, attempted transport or handling of dangerous goods which resulted or could have resulted in the safety of the operation being endangered or led to an unsafe condition (for example: dangerous goods incident or accident as defined in the ICAO Technical Instructions.
Non-compliance on baggage or passenger reconciliation.
Non-compliance with required aircraft ground handling and servicing procedures, especially in de-icing, refuelling or loading procedures, including incorrect positioning or removal of equipment.
Significant spillage during fuelling operations.
Loading of incorrect fuel quantities likely to have a significant effect on aircraft endurance, performance, balance or structural strength.
` Loading of contaminated or incorrect type of fuel or other essential fluids (including oxygen, nitrogen, oil and potable water).
Failure, malfunction or defect of ground equipment used for ground handling, resulting into damage or potential damage to the aircraft (for example: tow bar or GPU (Ground Power Unit)).
Missing, incorrect or inadequate de-icing/anti-icing treatment.
Damage to aircraft by ground handling equipment or vehicles including previously unreported damage.
Any occurrence where the human performance has directly contributed to or could have contributed to an accident or a serious incident.
Notifiable Aircraft Accident and Serious Incident
Definition of an Accident
“Accident” means an occurrence associated with the operation of an aircraft which, in the case of a manned aircraft, takes place between the time any person boards the aircraft with the intention of flight and such time as all such persons have disembarked, or in the case of an unmanned aircraft, takes place between the time the aircraft is ready to move with the purpose of flight until such time it comes to rest at the end of the flight and the primary propulsion system is shut down, in which:
a person is fatally or seriously injured as a result of:
being in the aircraft
direct contact with any part of the aircraft, including parts which have become detached from the aircraft
direct exposure to jet blast, except when the injuries are from natural causes, self-inflicted or inflicted by other persons, or when the injuries are to stowaways hiding outside the areas normally available to the passengers and crew
20140701GatwickAeroManv5.0
82
the aircraft sustains damage or structural failure which adversely affects the structural strength, performance or flight characteristics of the aircraft, and would normally require major repair or replacement of the affected component, except for engine failure or damage, when the damage is limited to a single engine, (including its cowlings or accessories), to propellers, wing tips, antennas, probes, vanes, tires, brakes, wheels, fairings, panels, landing gear doors, windscreens, the aircraft skin (such as small dents or puncture holes) or minor damages to main rotor blades, tail rotor blades, landing gear, and those resulting from hail or bird strike, (including holes in the radome)
the aircraft is missing or is completely inaccessible.
Definition of Serious Injury
“Serious injury” means an injury which is sustained by a person in an accident and which involves one of the following:
hospitalisation for more than 48 hours, commencing within 7 days from the date the injury was received;
a fracture of any bone (except simple fractures of fingers, toes, or nose);
lacerations which cause haemorrhage, nerve, muscle or tendon damage;
injury to any internal organ;
second or third degree burns, or any burns affecting more than 5% of the body surface;
verified exposure to infectious substances or harmful radiation.
Definition of a Serious Incident
“Serious Incident” means an incident involving circumstances indicating that there was a high probability of an accident and is associated with the operation of an aircraft, which in the case of a manned aircraft, takes place between the time any person boards the aircraft with the intention of flight until such time as all such persons have disembarked, or in the case of an unmanned aircraft, takes place between the time the aircraft is ready to move with the purpose of flight until such time it comes to rest at the end of the flight and the primary propulsion system is shut down.
The incidents listed below are typical examples of serious incidents. The list is not exhaustive and only serves as a guide to the definition of ‘serious incident’.
A near collision requiring an avoidance manoeuvre or when an avoiding manoeuvre would have been appropriate to avoid a collision or an unsafe situation.
Controlled flight into terrain (CFIT) only marginally avoided.
An aborted takeoff or a takeoff using a closed or engaged runway, a taxiway or unassigned runway.
A landing or attempted landing on a closed or engaged runway, a taxiway or unassigned runway.
Gross failure to achieve predicted performance during takeoff or initial climb.
All fires and/or smoke in the cockpit, in the passenger compartment, in cargo compartments or engine fires, even though such fires were extinguished with extinguishing agents.
Any events which require the emergency use of oxygen by the flight crew.
Aircraft structural failure or engine disintegration, including uncontained turbine engine failure, which is not classified as an accident.
Multiple malfunctions of one or more aircraft systems that seriously affect the operation of the aircraft.
Any case of flight crew incapacitation in flight.
20140701GatwickAeroManv5.0
83
Any fuel state which would require the declaration of an emergency by the pilot.
Runway incursions classified with severity A. The ‘Manual on the Prevention of Runway Incursions’ (Doc 9870) contains information on the severity classifications.
Takeoff or landing incidents, such as undershooting, overrunning or running off the side of runways.
System failures, weather phenomena, operation outside the approved flight envelope or other occurrences which caused or could have caused difficulties controlling the aircraft.
Failure of more than one system in a redundancy system which is mandatory for flight guidance and navigation.
The unintentional or, as an emergency measure, the intentional release of a slung load or any other load carried external to the aircraft.
How to report an aircraft accident or serious incident Aircraft accidents or serious incidents should be reported to the Air Accidents Investigation Branch (AAIB) and aircraft accidents to the police.
AAIB 24-hour reporting line
Telephone: 01252 512299
Who must report an aircraft accident or serious incident
The following people must notify the AAIB without delay if they have knowledge of an aircraft accident or serious incident the crew of the aircraft
the owner of the aircraft
the operator of the aircraft
people involved in the maintenance, design or manufacture of the aircraft
people involved in the training of the aircraft’s crew
people involved in providing air traffic control, flight information services or aerodrome services to the aircraft
In the case of an accident, the commander of the aircraft or the aircraft operator, if the commander has been killed or incapacitated, must also inform the police.
What information to give the AAIB
The AAIB will need to know as much of the following information as possible:
the type, model, nationality and registration marks of the aircraft
the names of the owner, operator and hirer (if any) of the aircraft
the name of the commander of the aircraft
the date and time (UTC) of the accident or serious incident
the last point of departure and the next point of intended landing of the aircraft
the position of the aircraft in relation to some easily defined geographical location
the number of o crew on board and the number killed or seriously injured o passengers on board and the number killed or seriously injured o other persons killed or seriously injured as a result of the accident
the nature of the accident or serious incident and the extent of damage as far as is known
Notifiable accidents are subject to examination by the Air Accidents Investigation
Branch (AAIB) of the Department for Transport (DfT). ATC will advise this organisation of all such incidents. The GAL Airside Operations Manager or nominated representative is responsible for confirming that ATC have contacted AAIB.
20140701GatwickAeroManv5.0
84
Reporting of Incidents, Accidents and Near Misses on the Airfield
Gatwick Airport Limited (GAL) requires to be notified of all incidents, accidents and near misses arising from work and activities on the airfield, including those arising from the activities of third parties. All Companies must ensure that relevant reporting procedures are included in staff induction training. Staff must clearly understand that the first call must be to notify GAL. Gatwick Airport Directive – GAD – Reporting of Incidents, Accidents and Near Misses on the Airfield. Following a reportable event, some or all of the actions listed below will be undertaken by Airside Operations staff, to preserve evidence. Photographs Statement(s) from those involved Preservation of ATC recordings Interrogation of CASPER (to track aircraft) Incident scene management
2.6 Procedures Related to Alcohol / Drugs
GAL HR Policy
The policy:
Sets out the rules regarding the consumption of alcohol and drugs for all Gatwick Airport Limited employees in connection with their duties
Describes the help that will be made available to anyone who believes they have an alcohol or drug dependency
Explains the procedures governing alcohol and drug testing
The purpose of this policy is to:
Help protect Gatwick based employees from the dangers of drug and alcohol misuse and encourage those with a dependency to seek help
Ensure that employees’ use of drugs or alcohol does not impair the safe and efficient running of the business, or compromise the safety of customers and employees
Enhance the reputation of Gatwick as a safe and responsible employer
Comply with all relevant legislation, including the Railway and Other Guided Transport Systems 2006 (ROGs) and Health and Safety regulations.
Scope
Our policy applies to all employees of Gatwick Airport Ltd. In addition, subcontractors will be asked to adopt a policy embracing the principles contained in this document.
Our policy has been agreed between representatives of the management team and recognised Trade Union officials based at Gatwick.
This policy supersedes all previous Drugs and Alcohol Policies.
20140701GatwickAeroManv5.0
85
Gatwick Airport Directive – GAD – Airside Discipline - refers.
Driving or attempting to drive while under the influence of drink or drugs (Road Traffic Act limit applies) 3 month to permanent airside driving ban applies.
London Gatwick Byelaws 3(16) state:-
No person shall be drunk or under the influence of drugs or other intoxicating substances in a Restricted Area.
2.7 Safety Directives / Problems / Recommendations
2.7.1 Complying with Safety Directives
The following statement is included on all Directives and Notices.
It is the responsibility of all employers to ensure that relevant Airport Notices are brought to the attention of their staff. However individuals remain responsible for their own actions and those who are in any doubt should consult their supervisor or manager.
2.7.2 Safety Reporting
All incidents, accidents and near misses on the airfield MUST be reported immediately they occur, via the Gatwick Control Centre Emergency Line Ext 222 on any GAL telephone or 999 from all other telephones (01293 501222 from a mobile phone)
Staff MUST NOT leave the scene of an incident, or remove vehicles involved, without the approval of GAL Airside Operations.
Reportable incidents include (list is not exhaustive)
Damage to aircraft Airbridge to aircraft Equipment to aircraft Vehicle to aircraft Vehicle to vehicle Vehicle to airbridge Vehicle to equipment Vehicle to structure Road traffic collision Any personal injury
2.7.3 Safety Recommendations
All safety recommendations issued by the Health and Safety Executive or Air Accidents Investigation Branch are tracked, owners identified to complete actions, as required by the investigation authority.
2.8 Procedures for recording aircraft movements
The IDAHO Airport Operational Database is the method used by GAL for recording aircraft movements, types and dates. Passenger numbers are recorded in another GAL database called SAP.
20140701GatwickAeroManv5.0
86
3. Required Aerodrome Personnel Qualifications / Training
3.1 Training Programme
In accordance with EASA – ADR.OR.D.017 – Airside Operations training programme covers all personnel involved in the operation, maintenance and management of the aerodrome.
3.1.1 GAL Airside Operations staff training consists of modules, covering the
following subjects:
Regulatory framework Airfield layout Principles of flight Airline operations Air Traffic Services Health & Safety Safety Management System Airside Driving Radiotelephony Bird hazard management Runway surface friction Inspection process Surface inspection Lighting inspection Apron equipment inspection Stand management Turn control Adverse weather Control of works in progress Marshalling Safeguarding Promulgation of information Environmental issues Airside discipline Fuelling of aircraft Emergencies and contingency planning Control authorities Special flights
Airport Fire Service Fire fighters (FF):-Trainee Fire-fighters (TFF) who have successfully completed an approved Initial Fire-fighting Course, will maintain competence through the approved MOCS.
When promoted to a higher role, the individual will attend the relevant Crew Commander or Supervisors course as soon as is practically possible at an approved training provider.
Crew Managers will be qualified to Crew Commander level and revalidate their certificate of competency every 4 consecutive years. Station Managers and Watch Managers will be qualified to supervisor level and revalidate their certificate of competency every 4 consecutive years. It is the policy of Gatwick Airport to ensure that all RFFS personnel are trained and assessed in accordance with CAP 699 and the approved MOCS. All RFFS personnel hold a current certificate of competence to the appropriate standard as agreed with the regulatory authority. All training records are held on an electronic database for auditing and inspection purposes.
20140701GatwickAeroManv5.0
87
Third Parties
Gatwick Airport Directive – GAD – Airside Safety Training – sets out the requirements for third parties.
Gatwick Airport Notice – GAN – Airside Safety Awareness Induction – advises
of a new e-learning package, to be undertaken by all staff who work airside, designed to enhance airside behaviours and reduce incidents. The training will become mandatory during 2018.
As a part of the wider drive to enhance airside behaviours and to drive down accidents and incidents airside, an online e-learning and assessment - Airside Safety Awareness Induction – is now available, which is valid for 2 years. This training will be mandated during 2018.
The following should be noted:
the e-learning package is NOT intended to substitute or replace training already in place by an individual’s employing company.
it does not cover airside driving, the employing company’s internal processes (such as turn procedures, risk assessments) and other employing company local practices and methodologies.
Gatwick Airport Directive – GAD – Airside Driving and Vehicle Operation – sets
out the requirements for persons operating on the manoeuvring area and other operational areas of the aerodrome. This includes persons operating unescorted.
3.1.2 Procedures
3.1.2.1 Training and Checking
On completion of the required training, a practical and theory assessment is carried out. A suitably qualified instructor who has not been involved in the delivery of training to the candidates must conduct the assessment. This is to ensure objectivity and to protect the integrity of the assessment process. The Airside Training Manager, in conjunction with Line Manager, also assesses the individual’s evidence log of the tasks completed, related to the training modules, to ensure the required competency has been achieved in all relevant areas.
3.1.2.2 Procedure if Required Standard is not achieved
If trainees do not achieve the required standard, a gap analysis will be carried out and they will be given extended training, to ensure they achieve the required competency.
3.1.3 Documentation to be stored and storage periods
Training material is reviewed and updated as required, to ensure compliance with current legislation. Documentation is owned by the Airside Training Manager and is date stamped.
Individual training records are stored in a shared computer drive and recorded on AirDat, which provides expiry alerts, thereby enabling refresher training to be programmed for individuals, prior to expiry.
20140701GatwickAeroManv5.0
88
3.2 Proficiency Check Programme
Each subject with the syllabi has a specific proficiency check timescale; annually, 3 yearly and 5 yearly.
Competency checks are carried out annually on specific activities, by Line Managers.
3.2.1 Procedure if Required Standard is not achieved
If trainees do not achieve the required proficiency, a gap analysis will be carried out and they will be given additional training to ensure they achieve the required standard.
3.2.3 Documentation to be stored and storage periods
Individual training records are stored in an electronic database which provides expiry alerts, thereby enabling refresher training to be programmed for individuals, prior to expiry.
3.3 Provision of Training and Proficiency Check Records to New Employer
3.3.1 In the event of an employee taking up alternative employment, then on request, Gatwick Airport Ltd shall provide the new employer with the employees training and proficiency check records.
20140701GatwickAeroManv5.0
89
Part C Particulars of the Aerodrome Site
20140701GatwickAeroManv5.0
90
Part C - Particulars of the Aerodrome Site
4. Description of Aerodrome Site
The aerodrome site is described in the UK AIP www.nats-uk.ead-it.com/public/index.php.html
4.1 Distance of Aerodrome from Nearest Town
2.7 nm N of Crawley - 24.7 nm S of London
4.2 Aerodrome Chart
A chart of the Aerodrome is shown in the UK AIP Aerodrome Chart – AD 2-EGKK-2-1 www.nats-uk.ead-it.com/public/index.php.html A detailed 1:2500 map showing the aerodrome’s major facilities, navigation aids, markings and layout of runways, taxiways and aprons is available upon request from Airside Compliance.
20140701GatwickAeroManv5.0
91
4.3 Location of Aerodrome Facilities and Equipment outside Boundary
4.4 Physical Characteristics of the Aerodrome
A description of the physical characteristics of the aerodrome can be found in the UK AIP – London Gatwick Airport – Textual Data www.nats-uk.ead-it.com/public/index.php.html
4.5 Operating Limitations
Runway 08L take-off climb surface. Aircraft parked on Pier 1 – Stands 2 to 5 infringe the runway 08L TOCS and are promulgated on the Type ‘A’ chart.
Runway 08L take-off climb surface. Concorde House penetrates the runway 08L TOCS promulgated on the Type ‘A’ chart.
A380 taxiway routing restricted. The UK AIP promulgates:-
Ground movement of large aircraft - Code F
A380 aircraft - Taxiway routes available to A380 are shown on aerodrome chart AD 2-EGKK-2-1, marked in yellow.
There is a positive but substandard obstacle clearance (minimum of 47.5 m) on Taxiway Juliet A380 routing. Pilots are to ensure that Cockpit over Centre-line (COCL) technique is used at all times when manoeuvring at Gatwick.
4.6 Types of Operations the Aerodrome is approved to Conduct
Use governed by regulations applicable to Gatwick CTR.
20140701GatwickAeroManv5.0
92
All flights operating at London Gatwick Airport are subject to prior approval of the Chief Executive Officer, Gatwick Airport Ltd, and require a slot allocated by Airport Coordination Ltd (ACL). Flights for aerobatic, recreational, commemorative, charity and record breaking purposes will not be permitted to use the airport, except with the prior approval of the Chief Executive Officer. Planned Diversion Procedure – Airline and other operators are advised that before selecting Gatwick as an alternate, prior arrangements for ground handling should have been agreed with one of the nominated handling agents. The use of this airport for training purposes is prohibited. The deliberate simulation of engine failure is not permitted whilst on approach to or departure from the airport. This Airport may be used by Executive and Private Aircraft (general aviation) subject to conditions as laid down in the UK AIP - EGKK AD 2.20 LOCAL TRAFFIC REGULATIONS
20140701GatwickAeroManv5.0
93
Part D Particulars of the
Aerodrome required to be reported to the
Aeronautical Information Service
20140701GatwickAeroManv5.0
94
Part D - Particulars of the aerodrome required to be reported to the Aeronautical Information Service 5. Procedures for the Promulgation of General Information. Permanent information regarding the operating conditions is published in the UK AIP, with
temporary information promulgated using UK NOTAMS and the Aeronautical Information Service.
Changes required to the Gatwick entry in the UK AIP is facilitated by approved sponsors, by
means of the electronic UK AIP change request form via the UK AIP Change Request Portal.
Particulars of the aerodrome which are reported to the Aeronautical Information Service can be found in the following sections of the UK AIP www.nats-uk.ead-it.com/public/index.php.html
5.1 Name of the Aerodrome London Gatwick
UK AIP - EGKK AD 2.1 AERODROME LOCATION INDICATOR AND NAME 5.2 Location of the Aerodrome
2.7 nm N of Crawley - 24.7 nm S of London UK AIP - EGKK AD 2.2 AERODROME GEOGRAPHICAL AND ADMINISTRATIVE DATA
5.3 Geographical Coordinates of the Aerodrome Reference Point Lat: 510853N Long: 0001125W
Mid point of Runway 08R/26L UK AIP -EGKK AD 2.2 AERODROME GEOGRAPHICAL AND ADMINISTRATIVE DATA
5.4 Aerodrome Elevation and Geoid Undulation
149 ft UK AIP - EGKK AD 2.2 AERODROME GEOGRAPHICAL AND ADMINISTRATIVE DATA
5.5 Runway Threshold Elevations and Geoid Undulation
Ruway 08R
Thr Elev 196 510845.10N, 0001224.59W GUND Elevation 149 (Highest Elev in TDZ) Runway 26L Thr Elev 196 510902.43N, 0001018.93W GUND Elevation 149
20140701GatwickAeroManv5.0
95
Runway 08L Thr Elev 195 510851.04N, 0001229.18W (GUND Elevation 149) Runway 26R Thr Elev 195 510903.69N, 0001057.40W (GUND Elevation 149) Highest Elev in TDZ 196 510901.71N, 0001024.13W (GUND Elevation 149)
UK AIP - EGKK AD 2-EGKK-2-1 – Aerodrome Chart
5.6 Aerodrome Reference Temperature
+20°C
5.7 Aerodrome Beacon Intentionally left blank – there is no aerodrome beacon at London Gatwick.
5.8 Name of Aerodrome Operator and Contact Details GATWICK AIRPORT LIMITED.
London (Gatwick) Airport, West Sussex RH6 0NP Phone: 0844-892 0322 (Gatwick Airport Ltd) Phone: 01293-601031 (ATC) Fax: 01293-601033 (ATC) Fax: 01293-503203 (Gatwick Airport Ltd)
UK AIP - EGKK AD 2.2 AERODROME GEOGRAPHICAL AND ADMINISTRATIVE DATA
6. Aerodrome Dimensions and Related Information
6.1 Runway Designation / True Bearing
08R 077.63° 26L 257.65° 08L 077.62° 26R 257.64°
Length and Width
08R 3316 x 45m 26L 3316 x 45m 08L 2565 x 45m 26R 2565 x 45m UK AIP - EGKK AD 2.12 RUNWAY PHYSICAL CHARACTERISTICS Displaced Threshold Location
The 08R landing threshold is displaced 393m The 26L landing threshold is displaced by 424m The 08L landing threshold is displaced by 427m The 26R landing threshold is displaced by 417m
20140701GatwickAeroManv5.0
96
EGKK AD 2.12 RUNWAY PHYSICAL CHARACTERISTICS Slope Runway 08R/26L – 0.06% Runway 08L/26R – 0.04% Surface Type
Runway surface: Asphalt, grooved. PCN 100/F/C/W/T
UK AIP - EGKK AD 2.12 RUNWAY PHYSICAL CHARACTERISTICS
Type of Runway
08R precision approach runway 26L precision approach runway 08L non-instrument runway 26R non-instrument runway An obstacle free zone (OFZ) is in existence.
6.2 Runway Strip
08R/26L 3436 x 280m 08L/26R 2685 x 150m Runway Stopway 08R 74m 26L 61m 08L - 26R - Runway Clearway 08R 152m
26L 144m 08L 475m 26R 138m UK AIP Type ‘A’ Operating Limitations
Runway End Safety Areas (RESAs)
Runway 08R/26L – East end – 90m
There is a 90m unobstructed area at the east end of Runway 08R/26L. All buried faces within the 90m RESA are delethalised. All upstanding runway light fittings are frangible.
On the runway centreline the first non-frangible obstruction is the security fence 270m beyond the end of the runway.
Runway 08R/26L – West end – 90m There is a 90m unobstructed area at the western end of Runway 08R/26L. All buried faces within the 90m RESA are delethalised. All upstanding runway light fittings are frangible.
20140701GatwickAeroManv5.0
97
On the runway centreline the first upstanding non frangible obstruction is the security fence, which is 180m beyond the end of the runway. Prior to the fence, the area has the frangible ILS and approach lights. All buried faces within the 90m RESA are delethalised.
Runway 08L/26R – East end – 90m
There is a 90m unobstructed area at the east end of Runway 08L/26R. All buried faces within the 90m are delethalised. On the runway centreline the first non-frangible obstruction is Pier 1 – 750m beyond the end of the runway.
Runway 08L/26R – West end -90m
There is a 90m unobstructed area at the western end of the Northern Runway. All buried faces with the 90m are delethalised. On the runway centreline the first non-frangible obstruction is the earth bund 90m beyond the end of the runway.
Taxiways
Taxiway: 23 m Surface: Concrete PCN 89/R/C/W/T
Taxiway: 23 m Surface: Asphalt PCN 100/F/C/W/T
Taxiway TANGO: 23 m. Surface: Concrete and asphalt PCN 55/R/C/W/T
Taxiway YANKEE: 23 m. Surface: Concrete and asphalt PCN 55/R/C/W/T
Taxiway UNIFORM: 25 m. Surface: Concrete. PCN 89/R/C/W/T
Taxiway VICTOR: 23 m. Surface: Concrete PCN 59/R/D/W/T
Taxiway WHISKEY: 23 m Surface: Concrete PCN 59/R/D/W/T
Parking Stands:
Surface: Concrete PCN 89/R/C/W/T
Surface: Concrete Block Paving PCN 100/F/C/W/T
Surface: Asphalt PCN 100/F/C/W/T
UK AIP - EGKK AD 2.8 APRONS, TAXIWAYS AND CHECK LOCATIONS/ POSITIONS DATA
6.3 Provision of Lighting – General
The lighting of runways 08R and 26L at Gatwick is precision approach Category III.
The lighting scale of runways 08L and 26R at Gatwick is scale L3.
Provision of Lighting – Approach / Runways
Runway 08R/26L – Approach Lighting
Frangible approach lighting is installed on runways 08R and 26L as follows:
914m high intensity Calvert coded centreline with five cross bar system. The lights are all uni-directional white and set as follows:
20140701GatwickAeroManv5.0
98
Runway 08R Rows 1 to 9 at 9° angle Rows 10 to 14 at 8° angle Rows 15 to 20 at 7° angle Last rows at 6°
Runway 26L Rows 1 to 8 at 9° angle (Row 4 not installed due to railway line). Rows 9 to 13 at 8° angle Rows 14 to 18 at 7° angle Last rows at 6°
Supplementary approach lighting system (SALS) over the inner 300m consisting of 27 barrettes of four lights each arranged in nine rows of three at 30m longitudinal intervals symmetrically each side of the extended runway centreline. The lights are unidirectional high intensity white (centre barette or red (outer barettes) and are set at the same angles as the corresponding approach lighting.
Precision Approach Path Indicators (PAPI) are installed runways 08R/26L. Note: 08R PAPI is located on the south side of the runway. Runway 08R/26L – Runway Lighting Runway lighting is installed on runway 08R/26L as follows
Centreline lights are at 15m spacing. The lights are bi-directional, high intensity and beamed at 5.5° to the horizontal. The lights are white to a point 900m from the runway end, with the following 600m alternate red and white and the final 300m all red in colour.
Edge lights at 60m longitudinal spacing and positioned 22.5m each side of the centreline. The lights are bi-directional, high intensity, white.
Touchdown zone lights over the first 893m of each runway direction consisting of 30 barrettes of four lights arranged in fifteen rows of two at 60m longitudinal intervals symmetrically each side of the runway centreline. The lights are unidirectional, high intensity, white. Threshold lights at each landing threshold. These lights are unidirectional, high intensity, green and are supplemented by flush wing-bars.
Runway End lights which are unidirectional, high intensity, red.
GMC and Turn-off lighting as appropriate.
RETILS, indicating 3-2-1 before the RETs
Runway Guard lights (wig-wags) are installed at all runway/taxiway intersections, comprising alternate flashing amber standard low-level dual traffic lights.
The extent of the ILS localiser sensitive area on runway 08R/26L is indicated by the use of alternate yellow and green lights on all exits from the runway.
20140701GatwickAeroManv5.0
99
Runway 08L/26R – Approach Lighting Approach lighting consists of 420m High Intensity centreline with one crossbar. Runway 08L/26R - Runway Threshold Identification Lights (RTILS) – 2 synchronised flashing white lights, one at each end of the threshold bar. Visible in the approach sector only. Precision Approach Path Indicators (PAPI) are installed on runways 08L/26R.
Runway 08L/26R – Runway Lighting
Runway lighting is installed on runway 08L/26R as follows:
Runway edge lights are high intensity, bi-directional white, 60m spacing.
Runway end lights red.
Threshold lights at each landing threshold, are unidirectional, supplemented with high intensity green flush wing bars.
Runway threshold indication lighting system (RTILS) consist of 2 synchronised flashing white lights at either side of the threshold bar for 08L and 26R.
Taxiway centreline lighting on Taxiway Juliet is switchable during 08L/26R operations, therefore, these lights will not be visible when the aircraft is on approach to 08L/26R. The Taxiway Juliet centreline lighting will only be visible when taxying back to the apron after landing.
Provision of Lighting – Taxiways and Aprons
Taxiway Lighting
Green centreline lighting is installed on all taxiways except on Taxiway Yankee from holding points Yankee 2 to Whiskey 1 which has blue edge lighting.
Associated with the taxiway centrelines are red stop-bars.
All the above taxiway lighting is selectively switched by Ground Movement Control in order to assist guidance of taxiing aircraft. The red stop-bars are positioned and selected in such a manner that any green route chosen is guarded against conflicting traffic at taxiway intersections.
Red stop-bars and green/yellow turn-offs are provided on the runway. All taxiway lighting on the runway is controlled by the "Air" Controller.
Runway Guard Lights are installed at all runway/taxiway intersections, comprising alternating flashing amber standard low level dual traffic lights, operating H24. Taxiway Unavailable Bars (TUBS) comprising of a line of red stop lights spaced at approximately 3 m centres across the full width of the mouth of each RET/RAT adjacent to the runway and running parallel to the runway centre-line. TUBS are installed at Alpha, Bravo, Bravo Romeo, Charlie, Charlie Romeo, Delta, Echo, Foxtrot Romeo, Golf, Golf Romeo, Hotel and Juliet, to prevent incursions onto taxiways which are unavailable due to operational issues such as Work in Progress
When Runway, 08L/26R, is brought into use Guard Bars at G2, H2, J2, J5, J6, J8, N1, P1, Q1, R1, S1, T1 and U1 are activated under the control of the Air Controller. Limited route selection is available within the area bounded by these Guard Bars and the runway. Outside of this zone, taxiway lighting is controlled under the normal Airfield Surface
20140701GatwickAeroManv5.0
100
Movement Guidance Control System (A-SMGCS). When the main runway 08R/26L is in use the northern runway 08L/26R displays normal taxiway green centreline lights.
Visual Docking Guidance System
Azimuth and Stopping guidance is provided by 'Safedock' – Advanced Visual Docking Guidance System (A-VDGS) except as follows: Marshaller Stands: 33R, 110L/R, 130-136, 150L/R, 152L/R
Safedock/Mirror Stands: 551-553. With the exception of stands 41 and 43, all stands are designed for nose in/push back operations. UK AIP - EGKK AD 2.9 SURFACE MOVEMENT GUIDANCE AND CONTROL SYSTEM AND MARKINGS
Availability of Standby Power
Twin fed HV ring reduces risk of complete supply failure. In the very rare chance that it does happen, sub-stations have back-up generators that are set-up to start as soon as power drops out. Control system all backed up by UPS.
6.4 Not applicable 6.5 Standard taxi routes These are promulgated in the UK AIP. AIRCRAFT GROUND MOVEMENT/PARKING/DOCKING
CHART – ICAO - AD 2-EGKK-2-2 6.6 Geographical Co-ordinates of each Runway Threshold
Runway 08R threshold 510845.10N, 0001224.59W Runway 26L threshold 510902.43N, 0001018.93W Runway 08L threshold 510851.04N, 0001229.18W Runway 26R threshold 510903.69N, 0001057.40W UK AIP - AD 2-EGKK-2-1 AERODROME CHART Geographical Co-ordinates of Stands
These are promulgated in the UK AIP UK AIP - AD 2-EGKK-2-3 AIRCRAFT GROUND MOVEMENT/PARKING/DOCKING
STAND COORDINATES 6.7 Geographical Co-ordinates of Obstacles
These are shown on the Type ‘A’ charts and promulgated in the UK AIP UK AIP – Type ‘A’ charts and EGKK AD 2.10 AERODROME OBSTACLES 6.8 Pavement Classification
Runway surface: Asphalt, grooved. PCN 100/F/C/W/T
Taxiway: 23 m Surface: Concrete PCN 89/R/C/W/T
Taxiway: 23 m Surface: Asphalt PCN 100/F/C/W/T
20140701GatwickAeroManv5.0
101
Taxiway TANGO: 23 m. Surface: Concrete and asphalt PCN 55/R/C/W/T
Taxiway YANKEE: 23 m. Surface: Concrete and asphalt PCN 55/R/C/W/T
Taxiway UNIFORM: 25 m. Surface: Concrete. PCN 89/R/C/W/T
Taxiway VICTOR: 23 m. Surface: Concrete PCN 59/R/D/W/T
Taxiway WHISKEY: 23 m Surface: Concrete PCN 59/R/D/W/T
Parking stands:
Surface: Concrete PCN 89/R/C/W/T
Surface: Concrete Block Paving PCN 100/F/C/W/T
Surface: Asphalt PCN 100/F/C/W/T
UK AIP - EGKK AD 2.8 APRONS, TAXIWAYS AND CHECK LOCATIONS/ POSITIONS DATA
6.9 Altimeter Checkpoint Location and Elevation
Apron 192 ft
UK AIP - EGKK AD 2.8 APRONS, TAXIWAYS AND CHECK LOCATIONS/ POSITIONS DATA
6.10 Declared Distances
Runway TORA TODA ASDA LDA Remarks
08L 2565m 3040m 2565m 2243m
26R 2565m 2703m 2565m 2148m
08R 3159m 3311m 3233m 2766m
26L 3255m 3399m 3316m 2831m
08R 2782m 2934m 2856m Take-off from intersection with Hold Golf 1
08R 2931m 3083m 3005m Take-off from intersection with Hold Hotel 1
26L 3142m 3286m 3203m Take-off from intersection with Hold Alpha 1
26L 2897m 3041m 2958m Take-off from intersection with Hold Bravo 1
26L 2464m 2608m 2525m Take-off from intersection with Hold Charlie 1
UK AIP - EGKK AD 2.13 DECLARED DISTANCES
6.11 Removal of Disabled Aircraft
Airlines must have a confirmed contract for aircraft recovery. Aircraft recovery arrangements must be submitted to Gatwick Airport Ltd.
6.12 Rescue and Firefighting Services
RFF Category
Gatwick Airport is RFF Category A10 fire cover during airport operating hours.
20140701GatwickAeroManv5.0
102
6.13 Exemptions None.
20140701GatwickAeroManv5.0
103
Part E Particulars of the
operating procedures of the aerodrome, its
equipment and safety measures
20140701GatwickAeroManv5.0
104
Part E – Particulars of the operating procedures of the aerodrome, its equipment and safety measures
7. Aerodrome Reporting
7.1 Aeronautical Information
Permanent information regarding the operating conditions is published in the UKAIP, with temporary information promulgated using UK NOTAMS and the Aeronautical Information Service. The London Gatwick entry in the UK AIP is reviewed on a quarterly basis by the Head of Airside Compliance to identify any items requiring amendment or any additional information which needs to be included. Any identified amendment / addition is submitted to NATS AIS by means of their electronic Change Request Form.
GAL Airside Operations and Airside Compliance subscribe to the Competent Authority system to receive various notifications, including Safety Instructions / Notices.
The Head of Airside Operations is responsible for notifying the Competent Authority of any errors or omissions in the published aerodrome information and of any impending changes in the aerodrome or its facilities likely to affect this information.
Accountability for ensuring the UKAIP is updated lies with the Head of Airside Compliance.
It is GAL policy that up to date, accurate information about the aerodrome facilities and operational state is maintained at all times.
Whenever any of the following conditions occur or can be anticipated and are of operational significance, Gatwick Airport will inform the Competent Authority so that action can be taken to amend the UKAIP and / or to promulgate the change by NOTAM / SNOWTAM.
Changes in the availability of the manoeuvring area and changes in the runway declared distances;
significant changes in aerodrome lighting and other visual aids.;
presence or removal of temporary obstructions to aircraft operation in the manoeuvring area; presence or removal of hazardous conditions due to snow, ice or slush on the movement area;
presence of airborne hazards to air navigation;
interruption, return to service, or major changes to rescue facilities and fire fighting services available; failure or return to operation of hazard beacons and obstruction lights on or in the vicinity of the aerodrome; erection or removal of obstructions to air navigation, and erection or removal of significant obstacles in take-off, climb or approach areas; air displays, air races, parachute jumping, or any unusual aviation activity along with any other information of operational significance.
20140701GatwickAeroManv5.0
105
7.2 Aerodrome Surveying
All obstacles at Gatwick are managed in accordance with CS-ADR-DSN, Chapter H and J – Obstacle Limitation Surfaces and Requirements and ADR.OPS.A.005. Crane operations see paragraph 18 Obstacle Control and Safeguarding.
Obstacle surveys are carried out annually. The survey is conducted according to ADR.OPS.A.005, CAP 232 and guidance provided by CAP 1732 and is undertaken by a competent authority approved contractor. The survey results are checked and validated by an independent approved surveying contractor. A final review is undertaken by the Airside Operations Compliance Team before being submitted to AIS. A copy of the current survey data is obtainable from Airside Compliance.
8. Procedures for Accessing the Aerodrome Movement Area
8.1 Co-ordination with GAL Security
To meet Department for Transport legislation, GAL Security are required to undertake regular security patrols of the airside security fence boundary during daylight hours, to ensure the security fence is in good condition and no security breaches have been made.
The security fence line check involves driving on the manoeuvring area, therefore all staff carrying out this role must undertake the appropriate training which is delivered by the Airside Operations Training Department.
8.2 Control of Access to the Aerodrome
Entrance gates onto the aerodrome are manned by GAL Security staff or are secured closed at all times. Electronic indicator boards display warning notice to airside users when low visibility operations are in force.
Operating procedures for the control of access to the aerodrome are detailed in a number of GADs issued by both GAL Airside Operations and Security Departments. The Security GAD deals with personnel access “ID Pass Holder Responsibilities” and the Airside Operations GAD “Airfield Driving and Vehicle Operation” deals with the system of Airside Driving Permit (ADP) and Airside Vehicle Permit (AVP) issue.
Third parties operating on the airfield must apply for an Airside Operator’s Licence before commencing operational activities.
It is Gatwick Airport Limited’s (GAL) objective to improve the safety and
environmental performance of all organisations operating on the airfield. To achieve
this, processes are in place to control the number of organisations operating on the
airfield.
Organisations must be in possession of a valid Airside Operators Licence (AOL) or a
Ground Handling Agreement issued by GAL before starting business or operations on
the airfield. Companies who are licensed to operate at Gatwick Airport under a
Ground Handling Agreement or an Airside Coaching Agreement are not required to
hold an AOL.
The AOL is a legally binding document entered into by GAL and the licensee
requiring the licensee among other things to
At all times have the required insurance policies in place.
Only provide those services specified in the AOL.
Only provide services to the company specified in the AOL.
20140701GatwickAeroManv5.0
106
Limit the numbers of vehicles used by the licensee airside to the number
specified in the licence.
Comply with all Directives and Notices issued by GAL.
Co-operate with GAL to improve safety and environment performance.
The licence must be signed by the Managing Director or a Company Director (who is
an officer of the Company) or the company authorised signatory for Gatwick who has
joined the Gatwick ID Scheme.
AOLs are issued at the sole discretion of GAL. Applicants for a licence must have a contract or a letter of intent to supply a service to an existing airside operator or airline before applying for a licence. GAL may consult with the Airport Operators Committee before issuing an AOL.
During the issuing or renewing process of an AOL, consideration will be given to the applicant's or licence holder's safety and environmental performance.
All submitted documentation and risk assessments must fully and accurately reflect the activities undertaken by the licensee at the time of application and must be amended and revised to reflect significant changes to maintain such accuracy throughout the life span of the licence. GAL will carry out audits against any risk assessment submitted. Companies are responsible for carrying out control measures stated in their risk assessment.
9. Inspection, Assessment and Reporting of Airside Areas 9.1 Communicating with Air Traffic Services
Communication with air traffic services during inspections is carried out by radiotelephony. Prior to commencement of inspections, Airside Operations contact the ATC Watch Manager by telephone, to advise of the areas to be inspected and discuss any operational restrictions.
9.2 Airfield Surface Inspections
A three part inspection process is carried out by the Airside Operations Department, as follows:
Main Aim and Objectives
The Airside Operations Department has the prime responsibility for carrying out inspections and audits of all airfield areas. The main aim of the three tier inspection system employed by Gatwick Airport Ltd (GAL) is to ensure that the highest standards of safety are maintained for all airport users and customers, and that both GAL and ATC are fully aware of the current condition and serviceability state of all its facilities. Additionally the following objectives will be fulfilled by the use of this formal inspection system -
to ensure compliance with the Standards and Recommended Practices of ICAO Annex 14, and the requirements of Regulation(EC) No 216/2008.
to ensure compliance, by all airside customers, with the requirements of Health and Safety legislation and the promotion of the GAL Safety Management System.
to ensure that any failures, unserviceabilities or obstructions that may affect the safety of aircraft and personnel on the airfield are then promulgated appropriately and planned rectification initiated.
20140701GatwickAeroManv5.0
107
The GAL Airside Operations Three Tier Inspection System
The three tier inspection system at Gatwick has the following main elements –
LEVEL 1 - Routine Inspections are carried out by Airside Operations staff each day, comprising four daylight inspections (first light, late morning, early afternoon, late afternoon and one lighting inspection. These inspections cover the whole of the movement area and zones adjacent to the aerodrome boundary. Details are recorded in the daily watch log
LEVEL 2 - the Detailed Airfield Inspections whereby the taxiways and aprons are inspected in more detail, on foot. Airside Operations staff will carry out this level of inspection. The main runway 08R/26L is also divided into several sections for detailed inspection. This inspection is led by an Airside Operations Manager. All faults noted are detailed on a map / plan of the specific area.
LEVEL 3 - the Airside Operations Management Inspection/Audit carried out by Airside senior management accompanied by an Airside Operations Manager, Senior Airfield Engineering Manager, Airfield Civils Manager and Airfield Ground Lighting. These cover all areas and facilities on a planned basis and are formally recorded. The main aim of this level of the system is to take the wider perspective into account and introduce an element of audit to ensure that the other two levels of inspection are carried out to the required standard. Level 3 Audits allow senior Operations management to view the whole airfield on a planned basis four times a year.
The Three Tier Inspection System and the procedures employed to operate it are subject to regular review to ensure that the system benefits from process improvements, technological and other changes which may improve the system.
The inspection system described in this document should enable the highest degree of safety to be maintained for aircraft operations and personnel health and safety. By operating at the three levels GAL will ensure that best practice safety management principles are applied to all its airside areas.
Areas Covered by the Three Tier Inspection System
The total airfield environment is covered by the inspection system and includes:-
all apron/stand areas on the piers, satellite, off-pier and other aircraft parking areas, including equipment parking areas.
all roadways serving stands, taxiways, runways and other associated airfield facilities including the perimeter road.
all taxiways, including rapid access and rapid exit taxiways (RATs and RETs) serving both runways up to each runway/taxiway holding position. Any other area such as compass base and engine ground run areas.
both runways including rapid exit/access taxiways up to the holding positions.
the associated runway strips including the runway end safety areas (RESAs) and the clear and graded areas (CGA).
all airfield ground lighting, signs and markings associated with runways, taxiways and aprons.
all runway approach lighting systems both inside and outside the airfield boundary.
all areas outside the airfield perimeter where hazards may form risks to aviation safety.
20140701GatwickAeroManv5.0
108
The three tier inspection system and particularly its recording process is designed to enable it to be audited by local GAL management. Audits are carried out by the GAL Airside Compliance Team and the aerodrome certification audit carried out by the Civil Aviation Authority.
Level 1 Inspection Process
Routine Daily Inspections
Level 1 routine daily inspections are designed specifically to provide an overview of the general condition of all airfield areas and facilities. This level of inspection is carried out principally by the Airside Operations Controllers of the Airside Operations Unit. Due to the large areas and distances covered the inspections will necessitate the use of vehicles. All staff carrying out inspections will keep their speed as low as practicable, as the lower the speed the more effective the inspection will be. The inspection will ideally be carried out in one single phase. However it is accepted that other operational priorities may take precedence. The results of the routine inspection will be recorded in the Airside Operations watch log. Details of unserviceabilities or hazards are to be promulgated to all customers and users of the airfield area through essential aerodrome information via ATC (ATIS and / or NOTAM) Inspection teams are briefed to note and report anything which may affect the serviceability and safety of the areas being inspected.
Runways - Inspection teams will check the following:
- the general condition of the runway strip, RESA, and CGA - the general runway condition including cleanliness, rubber build up and pit/drain covers - no FOD is present, if found removed immediately or close runway - damage to the friction course particularly cracking, spalling and loose joint seal - runway signs and paint markings for damage, wear and conspicuity - the physical condition of all PAPI units and Runway Guard Bars - the general security of runway lights and flush wing bars - the general drainage on and around the runway particularly any standing water - any obstructions infringing the runway strips and its safeguarded surfaces are marked/lit - work in progress is safely controlled and at the correct distances from runway centrelines - the condition and conspicuity of all windsleeves for day/night operations
Inspections are carried out to a minimum of four times per day typically: - a first light inspection prior to daytime operations - a mid morning inspection - a mid afternoon inspection
- a last light inspection prior to night operations
In addition to the above inspections, Airside Operations also carry out the following checks: - a runway lighting inspection
- a midnight multi - vehicle surface inspection - a mid morning observation check by bird controller - a mid afternoon observation check by bird controller
Taxiways and Taxilanes - Inspection teams will check the following-
the cleanliness of the pavement surfaces particularly with regard to ingestion hazards
20140701GatwickAeroManv5.0
109
- the condition of the pavement particularly cracking,debris, break up and spalling - all taxiway signs and paint markings for damage or wear - any obstructions and excavations that affect the taxiway strip - all work in progress on or adjacent to the taxiway system - any mud-pumping, ponding or water-logged areas - the general security of taxiway centreline and/or edge lights - the general condition of storm drains, manhole covers etc - the state of the grass edge including markers, grass length, wheel ruts and waterlogging
Grass Areas - Inspection teams will check the grass areas as part of the runway, taxiway and apron inspections and will take into account the following:
- the general condition of the vegetation, particularly any areas of blast erosion - the grass length and the amount of weeds - any long grass obscuring light or signs - any areas of ponding or water-logging - any excessive depressions or aircraft wheel tracks - any excessive difference in levels between grass and pavement surfaces - all items of FOD either removed or reported - all work in progress areas
Aprons and Stand Areas - Inspection teams will check the following-
- the general apron surface condition and any pavement damage or break-up - apron cleanliness particularly fuel/oil spillages, debris and FOD - the cleanliness and clarity of all paint markings and signs - any incorrect parking of aircraft, vehicles, equipment, passenger loading bridges
etc - any works in progress for general compliance with local instructions
Airfield Lighting
Approach lighting - 08R/26L approach lights (including all CAT 3 supplementary systems) are inspected once a week and are checked for outages, circuit unserviceabilities and gross misalignments. Any serious problems are reported immediately to GAL Airfield Engineering.
Runway lighting - Runway 08R/26L lighting will be checked as soon as practicable after the lighting has been switched on. Individual light outages and circuit failures will be reported to engineering. During the runway lighting inspection a check will also be made of all airfield obstruction lights.
Taxiway lighting - During the night period all taxiway lighting will be inspected generally and will include all centrelines, edge lights, stop bars, runway guard bars and lead on/lead-off lights. Any failures are reported to the Fault Centre and Airfield Ground Lighting.
Apron lighting - During the night period all apron lighting will be inspected and any failures and outages reported.
Zones Outside the Airport Boundary
A cursory inspection of the areas adjacent to and surrounding the airport boundary will be made to check that there are no obstructions affecting safeguarded surfaces particularly in the approach and departure tracks of each runway. Items such as cranes should be dealt with immediately. Any agricultural activity that may attract heavier concentrations of birds to the vicinity of the airfield should also be noted and reported.
20140701GatwickAeroManv5.0
110
Routine Airfield Sweeping/Cleaning Programme
A high standard of pavement cleanliness will be maintained at all times and a daily programme of mechanical sweeping of all stands will be undertaken. The routine programme can be interrupted at any time should any urgent sweeping be required as identified through the routine Level 1 airfield inspection process. A programme of litter picking and general FOD clearance will also be undertaken each day by the Airside Operations Support Team section of the Airside Operations Department. A stand scrubbing programme will also be carried out at regular intervals so that surfaces do not become slippery or greasy and cause a hazard to personnel, vehicles or aircraft.
Level 2 Inspection Process
Detailed Daily Inspections
Level 2 inspections are far more detailed checks of the condition on the full movement area and its associated facilities than are carried out at level 1. The level 2 inspections are carried out on foot thus enabling a far more comprehensive assessment to be made.
Within the level 2 process the total airfield area (excluding runway 08R/26L) is divided up into zones, with one zone being inspected in detail each day. The level 2 inspections can be carried out at a time on each day that best suits the stand demand, runway in use or other operational requirements. The inspections are carried out by x 2 Airside Controllers. Depending on the area being inspected it may be necessary to provide RTF cover by a leader vehicle. Runway 08R/26L has a separate detailed inspection system. The areas covered by the level 2 detailed inspections are as follows:-
Runways - the main runway 08R/26L is inspected in detail 4 times per year. The runway is divided up into 100m sections and dependent upon the movement rate on the day of the inspection a number of 100m sections are checked. The inspection is led by an Airside Operations Manager. The runway will be checked for the following:-
Surfaces - The full length and width of the runway is inspected during the cycle. The inspection team are briefed to note and record cracks, spalling and general break-up and any other surface failure particularly if there are signs of debris or material issuing from these areas. Particular attention will be paid to the touchdown zones and those other areas that are highly trafficked by aircraft. The touchdown zones will also receive particular attention to assess the degree of rubber build up that may affect the runway surface friction co-efficient. Attention will also be given to Rapid Exit Taxiways (RETs) and Rapid Access Taxiways (RATs).
Signs, markings and lighting - All signage along the runway will be checked for general conspicuity and damage with a physical check of all foundations and anchorage points. All runway markings will be checked for conspicuity, particularly in the touchdown zones where rubber deposits may have blackened certain markings. A selection of light fittings will be checked for general safety particularly with regard to fixing nuts.
Runway strip - The area surrounding the runway, including the Strip, Clear and Graded Area (CGA), and Runway End Safety Area (RESA) will also be checked. Attention will be given to its general bearing strength, the nature of the surface, any obstructions that should be frangible and delethalised and any other features that could cause damage to an aircraft should it overrun into these areas.
Runway Approach Light Systems - In addition to the runway surface inspection process, twice a year, each full approach lighting system, its cables, light fittings, masts and other support structure will be checked for its general safety and serviceability by a physical check on foot. During the lighting check a general
20140701GatwickAeroManv5.0
111
assessment of the lighting pattern will be made and any outages or gross misalignments noted and reported. Taxiways - The airport’s taxiway system, for detailed inspection purposes, form part of this cycle. The detailed inspections are carried out by x 2 Airside Operations Controller each day at a time dictated by traffic movements, runway in use etc., one section of the taxiway / apron area will be inspected on foot and all defects noted on a specialised map / diagram of the area. The taxiways are checked for the following -
Surfaces - All taxiway surfaces including any hard shoulders will be checked. Surfaces will be inspected for cracks, break-out and other deterioration. Signs, markings and lights - All taxiway paint markings will be checked for conspicuity and any repainting noted. All signs will be checked for their conspicuity and stability particularly where they may be affected by jet blast. A selection of taxiway light fittings will be selected and checked for securing nuts and general security.
Surrounding areas - All taxiway strips and associated grass areas will also be checked for their general safety particularly with regard to obstructions and surface conditions in a similar way to the clear and graded area of the runway.
Aprons and Stands - The airports aprons and stand areas, for detailed inspection purposes, form part of this cycle. Airside Operations Controllers will carry out the inspection and note all defects on a specialised map / diagram of the area. All aprons and stands will be checked for the following:
Surfaces - All aprons, stands and associated equipment parking areas will be checked for surface break-up particularly where debris and FOD is being created.
Signs, markings and lights - All surface paint markings associated with aircraft manoeuvring and parking will be checked for conspicuity and any re-painting requirements noted. Additionally, all signs, markings and lights associated with the Stand Entry Guidance (SEG). Information and Emergency signs will be checked for general conspicuity and functionality. All emergency telephones will also be checked for serviceability.
Surrounding areas - All service roads and equipment parking areas supporting each stand will also be checked for general serviceability and condition particularly where the surface may cause damage to vehicles or injury to passengers or personnel. These areas will also be checked for general cleanliness and parking discipline.
Level 3 Inspection Process
Management Inspections and Audits
The level 3 management process is essentially an audit of the level 2 detailed inspections
and it also ensures that Airside Senior Operations Management, Senior Airfield Engineering Manager and Airside Civils Manager are fully involved in the overall airfield inspection process. The level 3 process is carried out on a weekly basis and it divides the aprons, stands and taxiways up in such a way that each area is audited / inspected 4 times per year. The audit team log their findings on special report forms and each area is given a score. Any major problems that are found are reported immediately as the Airside Operations Manager accompanies the audit team.
Prior to the level 3 inspection a check will be made of the previous level 2 detailed inspection report of the particular area. This will allow Senior Operations management to audit the detailed inspection for content.
20140701GatwickAeroManv5.0
112
Twice a year the Senior Operations Management, Civils, Engineering management team will walk the full length of runway 08R/26L. This will allow managers to keep an up to date working knowledge of the condition of the runway. This inspection will be recorded and photographs taken where appropriate. This bi-annual inspection will also allow an audit of the detailed level 2 inspections of the runway to be carried out.
The information collected will be used by GAL to monitor the runway surface conditions along with the runway friction coefficient to predict when resurfacing will be required or remedial action taken.
In addition to the runway inspections there will be a twice yearly physical inspection of the runway approach light systems. This inspection will check for the general security and light output of each system.
All level 3 management inspections are undertaken on foot and are co-ordinated with ATC through the Airside Operations Manager who also attends the inspections. The pro-formas filled out as part of the level 3 inspections are kept in the Airside Operations building and are auditable by the CAA and GAL Airside Compliance Team.
The three tier inspection/audit system described above will allow GAL Airside Operations to maintain a high degree of safety on the movement area for aircraft and personnel health and safety. By operating at the three levels GAL will ensure that safety management principles are applied to its airside areas.
Assessment of Runway State and Measurement of Braking Action
The inherent friction characteristics of a runway surface deteriorate slowly over a period of time, but the friction of a runway surface and thus the braking action can vary significantly over a short period in wet conditions depending on the actual depth of water on the runway. Also, long term (six monthly) seasonal variations in friction value may exist. The consequence of a combination of these factors is that no meaningful operational benefit can be derived from continually measuring the friction value of a runway in wet conditions. In the context of these paragraphs a ‘wet runway’ covers a range of conditions from ‘damp’ to ‘flooded’ as described below. It does not include ice or runways contaminated with snow, slush or water associated with slush.
Airside Operations have trained and competent staff to carry out runway friction assessments in accordance with EASA ADR.OPS.C.010 using CAP 683 for guidance.
The runway state shall be closely monitored, assessed and reported when water based
contaminants are present. It is essential to provide a current indication of the nature of any water based runway contaminants, their amounts and the effect on aircraft braking action. Assessment of runway state and measurement of braking action responsibility rests with Airside Operations.
If the friction level deteriorates to a calibration value of 0.50 or less, the runway will be
notified as ‘liable to be slippery when wet’. Periodic monitoring tests, as required by EASA ADR.OPS.C.010 using CAP 683 for guidance, are conducted using an ASFT Mark 4 Airfield Surface Friction Tester.
Whenever water is present on a runway, a description of the runway surface should be
made available, using the following terms:- DAMP the surface shows a change of colour due to moisture. WET the surface is soaked but there is no standing water. STANDING WATER for aeroplane performance purposes, a runway where more
than 25 percent of the runway surface area (whether in isolated areas or not) within the required length and width being used is covered by water more than 3 mm deep.
20140701GatwickAeroManv5.0
113
Pavements in Winter Operations
During winter conditions it is essential that extreme care is taken to avoid having runway and other movement area surfaces contaminated by snow and ice. If the formation of ice is considered likely, frequent inspections of the movement area will be undertaken using friction measuring equipment where required. GAL is equipped with ASFT Mark 4 Airfield Surface Friction Tester. In addition information is provided by ice detection equipment installed in Airside Operations, which is connected to a detection probe installed on the runway.
Measurement of braking action is carried out by Airside Operations when the following conditions occur:
a) In inclement weather whenever runway conditions have changed significantly. b) After the runway has been cleared of snow. c) After the application of de-icing chemical. d) If the braking action has been reported by aircrew as less than good, if this has not
already been promulgated. e) In the event of a landing or overrun incident where braking action could have been
a significant factor. The results of all braking action checks are passed to the Airside Operations Manager
for review and actions taken as necessary and are also recorded in the Airside Operations Watch Log.
De-icing media is used at Gatwick Airport to remove or combat ice formation on the movement areas. The main medias in use are Clearway 6, Eco 2 and Konsin. Airside approved grit is used on walkways and roadways. Salt is NEVER used on the aerodrome. It is GAL’s policy to ensure that the effects of aerodrome operations on the surrounding environment are minimised. Accordingly, the minimum amount of media is used to maintain safety and procedures are in place to apply this media in varying concentrations depending on the conditions. In order to ensure maximum availability of meteorological information, GAL have on-site Met Office staff who provide detailed weather information and predictions of surface conditions and temperatures. The Airside Operations Manager is responsible for initiating de-icing or anti-icing action which is carried out by Airside Operations. All applications of de-icing media are recorded in the Airside Operations Watch Log (or the Snow / Ice Log which is brought into use when the Snow Plan is in operation). The current Gatwick Adverse Weather Plan details the procedures and processes for operations in adverse weather conditions and is distributed annually by Airside Operations. This document is an appendix to the Aerodrome Manual
20140701GatwickAeroManv5.0
114
9.3 Inspection Intervals
Type of Inspection Inspection / Interval Reporting Results
Level 1 designed specifically to provide an overview of the general condition of all airfield areas and facilities.
Daily Recorded in Airside Operations Daily Log. Details of unserviceabilities or hazards are promulgated to all customers and users of the airfield area through essential aerodrome information via ATC (ATIS and / or NOTAM).
Level 2 the total airfield area (excluding runway 08R/26L) is divided up into zones, with one zone being inspected in detail each day.
Detailed daily Any defects are recorded on a specialised map / diagram of the area
Level 3 Senior Management audit of the Level 2 detailed inspections
Weekly The audit team log their findings on special report forms and each area is given a score. Any major problems that are found are reported immediately as the Airside Operations Manager accompanies the audit team.
10. Inspection and Maintenance of Visual and Non-visual Aids
GAL Airside Engineering has a planned programme of inspections and maintenance of Visual Aids.
Obstacle lighting both on airport and off airport (blast screens, environmental bank, buildings, hazard beacons) is maintained by the Airfield Ground Lighting team. Routine inspections are undertaken by the Airside Operations team with any defects being reported to the Airfield Ground Lighting team for rectification.
The lighting of runways 08R and 26L at Gatwick is precision approach Category III.
The lighting scale of runways 08L and 26R at Gatwick is scale L3.
The lights are inspected by Airside Operations and faults reported to Airfield Ground Lighting team for rectification action.
Whenever aerodrome lighting is reported to be defective, by a pilot, the report will be forwarded to Airside Operations for rectification.
Flight inspections are carried out every 6 months for the main runway (08R/26L) and every 12 months for the northern runway (08L/26R) by an approved flight check operator.
Inspection of all runway lighting is carried out as soon as possible after the lighting has been switched on. All faults are reported to on a standard form and if the fault is a major one, the Airfield Ground Lighting team are immediately informed. In general, runway lighting repairs take priority over other work. The Airside Operations Manager initiates NOTAM action in the event of major defects, the Competent Authority being advised if these are likely to be long term.
The centreline, runway edge and touchdown zone lighting are photometrically checked monthly and fittings replaced if required.
ATC Engineering section has a planned programme of inspection and maintenance of Non Visual Aids. Although this programme is flexible within narrow limits, any postponement of a maintenance period may disrupt the whole programme.
20140701GatwickAeroManv5.0
115
If for any reason the Watch Manager considers it necessary to postpone maintenance, details are to be recorded in the ATC Watch Log.
Whenever an ATC facility is reported to be defective, by a pilot, the ATC Duty Engineer, after consultation with the Watch Manager, will decide on one of the following actions:
To retain the facility in operation as fully serviceable To retain the facility in operation with specified limitations To withdraw the facility from service
11. Inspection and Maintenance Procedures for Aerodrome Equipment
Gatwick Airport use the following electronic system to manage the inspection and maintenance of its assets:
Gatwick Airport’s CMMS (computerised maintenance management system). Accessed by over 300 users and holds around 120,000 asset records. Tracks thousands of inventory parts moving between supplier, central and forward stores. Schedules 30,000+ frequency based planned maintenance records. Planned maintenance is entered into the system by a team of planners.
Planners ensure that maintenance schedules comply with regulations and asset stewardship procedures and keep asset records up-to-date. Resources such as technicians, contractors and spare parts can then be in place to carry out the planned maintenance at the correct times to keep assets in good working order. Engineering faults are reported and entered into the Work Order application to be routed to a technician. The technician can then visit the fault to make a repair. Technicians use the CMMS to record time, problems, causes and remedies. Any consumed spare parts are booked against the work order record. Enabling accurate failure, downtime, data, problem, asset trending. Planned Maintenance Planned maintenance activities fall into three categories: Periodic – necessary to ensure the reliability or to sustain the design life of an asset. Predictive – condition monitoring activities used to predict failure. Preventive – maintenance that can be initiated without routine or continuous checking (e.g. using information contained in maintenance manuals or manufacturers’ recommendations) and is not condition- based. Condition-Based Preventive Maintenance Preventive maintenance initiated as a result of knowledge of an items condition from routine or continuous monitoring. Condition Monitoring Continuous or periodic inspection, assessment, measurement and interpretation of the resultant data, to indicate the condition of a specific component so as to determine the need for some preventive or remedial action. Corrective Maintenance The remedial actions performed as a result of failure, to restore an item to a specified condition. Corrective maintenance may or may not be programmed. Critical Assets Assets for which the levels of service to customers, financial or business consequences of failure are sufficiently severe to justify proactive inspection and rehabilitation. Critical assets have a lower threshold for action than non-critical assets
12. Maintenance of the Movement Area
Construction, maintenance, surveys and repair work is carried out on the Movement Area (all areas used for the movement of aircraft including runways, taxiways, and aprons and
20140701GatwickAeroManv5.0
116
associated grass areas) and other external airside areas at Gatwick Airport by day and night. The safety of those working on maintenance, construction or repairs airside at Gatwick Airport is governed by the "Safety Instructions for those carrying out work airside" issued by Airside Operations, Gatwick Airport Limited (GAL).
All contractors working on GAL or commercial assets for repair, alteration or improvements, should apply for Work Requests through the P2W system before starting works on site. This is in addition to the requirements laid out below.
Requests to carry out works on the airfield in the first instance should be made to the Airside Projects Integration Lead or Airside Projects Approvals Lead.
Permit to Work (P2W)
The P2W Work Request is a web based tool that provides the airport with increased control and management of those Environmental, Health and Safety risks presented by contractors working on commercial or GAL assets. Briefly, it identifies work type, start/stop time, location, people, competencies, risk and method statements, change control and hazardous activities permits.
The only contractors who will be exempt from applying for P2W Work Requests will be those working within the control of the GAL Capital Projects Team (where construction sites are secure and completely hoarded off and generally managed under the statutory control of the CDM regulations), and those contractors servicing the operational requirements for aircraft, delivering supplies or contract cleaning.
Aerodrome Areas Concerned
All works which are to be conducted in external airside areas to infrastructure and fixed facilities must be approved in advance by GAL Airside Operations. This includes interior building works which may affect external airside areas i.e. due to the location of a skip, contractor's compounds, painting and vehicle parking etc. Internal building works which do not affect external airside areas are exempt. In addition, any works landside in areas where approach lighting is installed must also be approved in advance by GAL Airside Operations. There are other areas which may be under the control of Airside Operations and the Airside Projects Integration Lead or Airside Projects Planning Lead should be consulted in the first instance.
Airfield Works Scheduling Meeting
This group meets on a weekly basis and discusses and plans all forthcoming works in progress on the movement area. The meeting is chaired by GAL Airside Projects Team with other attendees being from the various GAL departments, the contractors, Air Traffic Control.
Longer term projects which require permanent changes to layouts and facilities or long term closure of facilities must, in the first instance, be brought to the attention of the Airside Projects Integration Lead or Airside Projects Planning Lead. Works of this nature may require the prior approval from external organisations such as the Competent Authority and ATC and the production of various Airfield Works Instructions and other communications. This will require several months' notice.
Management of Airfield Works and Notice Periods
Following attendance at the Airfield Works Scheduling Meeting or communication with Airside Engineering Civils Manager, Airside Projects Planning Lead and subsequent approval; all requests for airside works should then be directed to the Airside Operations Control Room or the Airside Control Lead (ACL), giving full details of the work proposed, 24 hours in advance or the last working day before the start of works. A Daily Airside Works Permit will then be generated. This is in addition to any permit application or approval gained through the Permit to Work (P2W) process. This also includes works by Capital Projects that take place outside of any marked works compound.
20140701GatwickAeroManv5.0
117
Some minor short term minimal impact works can be arranged direct with the ACL and agreed at the ACL's discretion including notice period and duration. The ACL may in turn discuss any request with the Airside Operations Manager (AOM) but will communicate any outcome direct.
The minimum notice period for longer term works which affect airside areas, not including longer term works requiring external approval and consultation as mentioned above, is two weeks to allow adequate provision for the assessment of effects on airside operations, air traffic control and the issue of relevant notices.
The only exceptions to the above are urgent and essential repairs.
Daily Airfield Works Permit
The supervisor or sponsor of any airside works must be in receipt of a Daily Airfield Works Permit before any work can start.
Details of the proposed works should be notified to the Airside Control Lead (ACL) or Airside Operations Control Desk by 16:00L on the last working day before the works are due to be carried out.
All permits are authorised by the ACL who will enter on the permit the conditions applicable to the works which must be adhered to at all times.
Before work commences the permit must be collected from GAL Airside Operations by the supervisor, sponsor or competent person with good knowledge of the works, who will ensure that the works operator is fully briefed and equipped for the work to be undertaken.
Any changes to the plan of works or original agreements must be communicated as soon as possible to the ACL.
When work is completed the works operator must inform GAL Airside Operations who will carry out an inspection or take the necessary action to restore the area to normal operations, or ensure that it is safeguarded.
Further details concerning Works Authorisation Permits may be found in the "Safety Instructions for those carrying out work airside" document.
Responsibilities
GAL Airside Operations is responsible for some or any of the following where appropriate:
Issuing the Daily Airfield Works Permit and briefing the works supervisor concerned.
Co-ordinating any closures and diversions required including obtaining ATC clearance, if appropriate, before work starts.
Specifying and supplying the leader/follow-me cover to be provided and making arrangements for any radiotelephone or visual communications to be used.
Briefing the supervisor on the permitted working hours and the layout, protection, marking and lighting of the works area by day and night.
Specifying the vehicle and pedestrian access routes to be used.
Specifying and briefing any 'look-out' arrangements.
Briefing the supervisor on the conditions and arrangements for withdrawal of the works if applicable.
Checking any temporary diversion of the airside road system when it has first been set up.
Inspecting any area where work has been completed and taking the action required to restore normal operations.
20140701GatwickAeroManv5.0
118
The works operator is responsible for the following:
The attendance of the works supervisor at GAL Airside Operations to receive the Daily Airfield Works Permit and be briefed on the operational safety aspects of the works.
Ensuring that all airside safety and personnel safety rules are complied with.
Ensuring strict compliance with all instructions given in respect of the Daily Airfield Works Permit.
Providing all the materials, signs and lighting for the works area. Barriers and lights used for short term and urgent closures on the Manoeuvring Area (areas provided for take-off and landing and surface movement of aircraft excluding aprons and maintenance areas) will be provided by GAL Airside Operations when necessary. Long term work sites must have appropriate fences and lighting as per Airside Planning Technical Standards, and all such fencing and marking must be supplied by the contractor.
Preventing FOD debris and rubbish being deposited or left airside.
Advising GAL Airside Operations when work is completed.
Obtaining Airside Driver Permits and Airside Vehicle Permits for all necessary personnel, vehicles and equipment. The GAD entitled "Airside Driving and Vehicle Operation" refers.
Arranging a contractor's safety briefing with the appropriate GAL representative where appropriate.
Producing method statements, risk assessments and other permits through P2W
Designing and setting up any temporary diversion of the airside road system in accordance with Chapter 8 of the Traffic Signs Manual (Highways Agency) and Airside Technical Standards.
Manoeuvring Area
Some contractors such as grass cutters are trained and authorised to operate independently on the Manoeuvring Area with radiotelephone communications. Daily Airfield Works Permits are required to ensure proper coordination and safeguarding of their activities. ATC clearance must also be obtained before their operations can start and any permits issued.
Additional permits required from GAL Engineering for hot works, excavation works, working in confined spaces and Change Control approvals are subject to the P2W process.
Instrument Landing System Critical Area
Strict control, ATC approval and Daily Works Permits are required to ensure proper coordination and safeguarding of any activity in these areas and before works start. ATC Engineering approval may also be required.
12.2 Overload Operations
The aerodrome taxiway system does not have any overload operations.
13. Aerodrome Works
13.1 Co-ordination and Planning of Aerodrome Works
At the start of any project/concept, it is GAL policy to ensure that an airside operational input is given. This will ensure that any development will be in accordance with the Competent Authority and EASA requirements.
Before any such project or development is financially approved, the GAL process requires the approval of the Head of Airside Operations, or his appointed
20140701GatwickAeroManv5.0
119
representative, thus ensuring that any project or development meets the requirements of the aerodrome certificate. An Airfield Works Scheduling meeting is held on a weekly basis and discusses and plans all forthcoming works in progress on the movement area. The meeting is chaired by GAL Airside Operations, with other attendees being from the various GAL departments, Contractors, Air Traffic Control and the GAL Airside Operations Project Team. General Advice Notices are issued by GAL to advise the airside community of aerodrome works.
13.2 Communication with Air Traffic Services during Aerodrome Works.
A weekly works instruction is issued by Air Traffic Services detailing the programme of works being carried out on the aerodrome. Airside works permits are authorised by GAL Airside Operations to facilitate the works taking place on the aerodrome.
Communication with air traffic services during aerodrome works is carried out by Airside Operations as required.
14. Procedures for Apron Management
14.1 Transfer of Aircraft between ATC and Apron Management Unit
Intentionally left blank – Gatwick does not have an apron management unit.
14.2 Allocation of Aircraft Parking Positions
The Flow Operations team are accountable for:-
The arrival and departure of Air Traffic Movement (ATM) flow, stand planning and aircraft turn performance.
Responsible for runway throughput and on-time performance, including winter and adverse operations.
Ensure the efficient throughput of aircraft movements by liaising with the Operations integrators, ATC, Handling Agents, AFS, AAIB, Meteorological Offices, Airlines, Police and the GCC Leader during periods of adverse weather, equipment serviceability, incidents and emergencies and any other major disruption.
14.3 Aircraft Engine Start and Pushback
Ground crews must ensure, as much as reasonably practical, that during engine start
up, the area immediately behind the stand is clear of aircraft, staff, passengers,
vehicles and equipment. Ground crews should notify their flight crew of any hazard
that could result from the starting of engines.
Gatwick Airport Directive – GAD – Standard Aircraft Pushback Procedures - provides
details for tug drivers of the standard pushback procedures to be adopted by aircraft
pushing back from stands at Gatwick Airport. These procedures have been agreed with
ATC.
14.4 Aircraft Marshalling
The marshalling of aircraft will only be undertaken by fully trained, competent and authorised GAL Airside Operations staff.
GAL Airside Operations staff have sole responsibility for marshalling aircraft on the manoeuvring area and for the turning of aircraft onto stand.
20140701GatwickAeroManv5.0
120
Internationally recognised signals will be used and marshalling will be carried out using bats or illuminated wands during low visibility and at night.
In order that they may be clearly identified as Marshallers, Airside Operations staff will wear approved high visibility clothing and should ensure that they remain within the pilot’s vision at all times.
“Follow me” Service
Airside Operations vehicles can be used for guiding aircraft to their parking position. The vehicles are equipped with signs, easily visible at day / night, reading “Stop” and “Follow Me.”
They are equipped with two-way radios for communications with ATC / or base frequencies for routing to stand.
The vehicle is driven at a steady speed for aircraft to follow.
15. Procedures for Apron Safety Management
15.1 Protection from Jet Blast
The Gatwick Airport Directive - GAD – Aircraft Blast - informs all flight and ground crews
of the hazards that may result from aircraft blast and fumes. It describes procedures
that are intended to reduce the risk of damage to buildings, aircraft and equipment and
injury to staff and passengers in the aircraft movement area.
15.2 Safety Precautions During Aircraft Refuelling
The Gatwick Airport Directive - GAD – Fuelling of Aircraft – sets out the safety precautions during aircraft refuelling operations.
Supervision of fuelling
General Precautions Prior to and During Fuelling Fire Extinguishers Hydrant Refuelling and Emergency Stop Buttons (ESB) Clear Exit Paths Fuelling Safety Zone
Aircraft with Passengers on Board and Embarkation / Disembarkation During Fuelling Fuel Spillages Fuelling of Aircraft Inside Hangars
15.3 FOD Prevention
Foreign object damage’ or ‘foreign object debris’, both abbreviated to FOD, are a potential source of catastrophic damage to aircraft - particularly engines. FOD can also be a tripping or slipping hazard resulting in injury to personnel and passengers.
The Gatwick Airport Directive - GAD – Foreign Object Debris (FOD) – sets out measures for FOD prevention.
A high standard of pavement cleanliness will be maintained at all times and a daily programme of mechanical sweeping of all stands will be undertaken. The routine programme can be interrupted at any time should any urgent sweeping be required as identified through the routine Level 1 airfield inspection process.
A programme of litter picking and general FOD clearance will also be undertaken each day by the Airside Operations Support Team section of the Airside Operations Department.
20140701GatwickAeroManv5.0
121
A stand scrubbing programme will also be carried out at regular intervals so that surfaces do not become slippery or greasy and cause a hazard to personnel, vehicles or aircraft.
15.4 Monitoring Compliance of Personnel Safety Procedures
The Gatwick Airport Directive - GAD – Airside Safety Training - sets out the need for a safety training policy and details of the initial airside safety training requirement for all staff working in apron areas including all airside roads and the manoeuvring area at Gatwick Airport. All airside employers must ensure all airside employees receive a safety briefing prior to gaining access to the apron and manoeuvring area.
Airside Safety Training Policy
Gatwick Airport Ltd seeks continuous improvement in airside safety through its’ Airside Safety Management System. Training is an essential part of the system, ensuring that all airside employees are competent to carry out the tasks required by their employer. Additionally, all employers have a responsibility to train their employees under requirements set out in the Health & Safety at Work Act 1974 and associated regulations. The Competent Authority, who seek to ensure the safety of aircraft at aerodromes, also require that all employees working in or around aircraft are competent to do so.
Working within the airside environment has unique hazards. An airside employer’s safety training must address these in addition to the normal safety training requirements. Many of the hazards encountered on the apron are shared by all or most airside employees and employers. Therefore, for the safety of employees, passengers and aircraft, a policy and standard on airside training is necessary.
The basis for common standards of safety training is a policy that all airside employers seek to implement. The following is the policy for airside employers at Gatwick Airport.
All airside employers must, through training, provide airside employees with the skills and competencies to work safely and effectively whilst carrying out their tasks on the airport. This means:-
Ensure a safety briefing is given prior to gaining access to the apron and manoeuvring area
Individually and in co-operation with other airport users, identifying skills and competency requirements through training needs and risk assessment
Developing training programs in co-operation with employees and other airside employers
Delivering appropriate training in a timely fashion
Regularly reviewing the effectiveness of the program
GAL will assist achieving the policy as follows:-
With the assistance of other airside employers, identifying common training needs and standards
After consultation with airside employers, set training standards for commonly held risks, e.g. airside driving and basic apron safety training
Publishing standards as Gatwick Airport Directives
20140701GatwickAeroManv5.0
122
Distributing the Gatwick Airside Operations monthly Aerodrome Safety Oversight report.
Increasing awareness through consultation groups, seminars, posters, etc
Auditing airside employers training programmes and records
Reviewing with airside employers the results of the audits, both individually and with the consultation groups the overall achievement
Airside employers must, through a process of risk and training needs assessment, develop their own training plans, programs and training sessions; keep the training needs under review and record all training.
Common training needs can be provided from sources external to the airside employer. These may be either other airport companies or professional training organisations. Advice on safety training assessment, delivery and recording is available from GAL Airside Operations. There are training packages and organisations available to provide training. GAL and other organisations are able to give advice on these.
Auditing
GAL will audit airside employers’ safety training processes to ensure compliance with this policy.
16. Vehicle Control on Operational Areas
Full details of the requirements for both airside vehicles and drivers are contained in the GAD - ‘Airside Driving and Vehicle Operation’, and its supporting guidance document, the Airside Driver Manual, which is an attachment to the Aerodrome Manual.
The driver training policy and manual has been developed using best practice guidance from the following documents and publications,
• CS-ADR-DSN • CS-ADR-AMC • Air Navigation Order: The Order And The Regulations • The Gatwick Airport - London Byelaws 2009 • Manual of Air Traffic Services Part 1 and 2 • CAP 168 – Licencing of Aerodromes Guidance Doc • CAP 637 – Visual Aids Handbook Guidance Doc • CAP 642 – Airside Safety Management Guidance Doc • CAP 700 – Operational Safety Competencies Guidance Doc • CAP 790 – Requirement for an Airside Driving Permit Guidance Doc • EAPPRI – European Action Plan for the Prevention of Runway Incursions
Drivers that are also required to operate on the manoeuvring area undergo additional training by GAL Airside Operations or accredited third party trainer.
17. Wildlife Hazard Management
The aim of wildlife hazard management at Gatwick is to maintain, as far as is reasonably practicable, a bird and animal free airfield. The Airside Operations Lead is responsible for ensuring bird strike management is carried out in accordance with EASA ADR.OPS.B.020
using CAP 772 for guidance and the Wildlife Habitat Control Management Plan. Wildlife
control duties are carried out by the Airside Duty Team H24.
GAL uses the standards below to control birds on and around the aerodrome in accordance with EASA ADR.OPS.B.020 using CAP 772 for guidance.
20140701GatwickAeroManv5.0
123
Wildlife Habitat Control Management Plan (WHCMP) – The WHCMP defines and implements the appropriate bird control measures to reduce and mitigate the risk and is the responsibility of the Airside Operations Lead.
Birdstrike Hazard Map - A bird hazard safeguarding map is maintained. This is based on an Ordnance Survey map and highlights the assessed local hazards and also shows on a wider scale such sites as landfills, gravel extraction, and water bodies.
Local Bird Hazard Management Working Group - The group meet quarterly to discuss bird strikes, habitat management issues, risk assessments, and training issues. The group also track recommendations/action points from audits. The group have standard terms of reference and the members include airside operations, landscape managers and grass management contractors and any other individuals concerned with bird hazard management.
UK CAA Birdstrike Committee – Gatwick Airport has representation on this Committee.
All Airside Operations personnel who carry out bird hazard management duties are trained and hold a firearms certificate which must be revalidated every 5 years.
The authorisation (The Firearms Act 1968 – Section 5) is held by the Head of Airside Compliance.
All staff attend an approved bird hazard management training course and to ensure competency, periodic refresher training is undertaken in the use of firearms, bird hazard management operations and local ornithology. Comprehensive records are kept of all bird control activities and firearms training and assessments.
All vehicles involved in bird hazard management activities are suitably equipped and maintained.
Wildlife Patrols are carried out to ensure that:
the presence of birds and animals on the airfield and in the surrounding area is minimised. an environment not conducive to the presence of birds is created. birds on the airfield are detected and dispersed. warning can be passed to aircraft and ATC about the presence of flocks of birds on the airfield. the formation of night roosts is prevented.
Bird patrols are carried out across the active airfield. All areas are patrolled, with emphasis rather than concentration being on the active runway.
Bird Hazard Assessment / Warning
Bird hazard assessment is carried out via the tactical bird patrols and strategic analysis by the Bird Co-ordinator and Operations Management. Air crew are warned whenever the presence of birds in large numbers is thought to constitute an immediate hazard. This is done by informing Airside Operations or ATC by radio, this warning then being passed on to aircraft directly or via ATIS.
In the event of a prolonged infestation of birds on or immediately adjacent to the airport NOTAM action may be taken to warn air crew of the hazard. This should only cover periods of short to medium duration and will be cancelled when the hazard ceases to exist.
All wildlife strikes or suspected strikes are investigated and reported immediately by Airside Operations or ATC. An electronic Wildlife Strike Occurrence Form (CAA Form 1282) is completed online via the CAA website by Airside Operations on all occasions where there is a confirmed or unconfirmed strike.
20140701GatwickAeroManv5.0
124
18. Obstacle Control and Safeguarding
18.1 Obstacle Control
A cursory inspection of the areas adjacent to and surrounding the airport boundary will be made to check that there are no obstructions affecting safeguarded surfaces particularly in the approach and departure tracks of each runway. Items such as cranes should be dealt with immediately. Any agricultural activity that may attract heavier concentrations of birds to the vicinity of the airfield should also be noted and reported.
Gatwick Airport Limited (GAL) must ensure that all temporary obstacles on and around the airport, such as mobile or tower cranes and other tall construction equipment, do not endanger aircraft in flight, nor interfere with any visual aids or radio aids to Air Navigation. Note: tall construction equipment includes piling rigs, manlifts, concrete pumps, mobile lifting platforms, etc.
Gatwick Airport Directive – GAD – Procedure for the Approval of Cranes and Other Tall Construction Equipment – describes the approval process and requirements for operating this type of equipment.
Obstacles are controlled and monitored in accordance with the requirements of CAP 232 – Aerodrome Survey Information and EASA Part-ADR-OPS.
An Obstacle survey is carried out annually.
Where there is a change to the current obstacle data published in the UK AIP, this will be notified to AIS by Airside Compliance.
18.2 Safeguarding
Safeguarding is a technical term used in Planning Law to mean the control of development with the object of protecting a particular amenity.
Safeguarding of Aerodromes is the process used to ensure that the operation and development of aerodromes/airfields/airports is not inhibited by new developments in their vicinity. In particular the process contributes to the safe operation of aircraft during the approach and landing procedure, while taking-off, while flying in their vicinity, or while manoeuvring on the ground.
Aerodrome Safeguarding at Gatwick is managed by the Head of Airside Compliance in accordance with EASA – ADR.OPS.B.075.
The objectives are:
to ensure the airspace around the aerodrome is maintained free of obstacles so as to permit aircraft operations to be conducted safely
to prevent restrictions being placed on operations by the growth of obstacles on or around the aerodrome
to maintain the integrity of visual and radio based aids to air navigation
to contain other hazards, such as birds and the uncontrolled use of construction equipment (particularly cranes)
to prevent restriction on the future development of the aerodrome
These are achieved by establishing:
a series of Obstacle Limitation Surfaces (OLS) based on the runway(s) that define the limits to which objects may project into the airspace
20140701GatwickAeroManv5.0
125
limiting surfaces which protect visual aids
a series of areas and/or surfaces which, if infringed, requires a check to establish the effects, if any, on radio aids to air navigation
protection for instrument flight procedures and any associated visual circling
a 30 km wind turbine circle around the aerodrome
To make these effective, the following are in place:
processes for the checking of new developments both on and off the aerodrome
a process for the clearance of temporary obstacles, such as cranes
regular checks of temporary and permanent obstacles on and around the aerodrome
knowledge of existing sites used by birds for either roosting, feeding or nesting, and flight paths between them, within the bird hazard area, supported by regular checks of these and other potential sites.
19. Aerodrome Emergency Planning
19.1 Dealing with Emergencies at the Aerodrome
Emergency Orders are jointly promulgated to indicate the responsibilities of GAL and ATC personnel at Gatwick Airport and the action to be taken in the event of:-
Aircraft Accident Aircraft Accident off the Aerodrome Aircraft Accident Imminent Full Emergency Aircraft Ground Incident Local Standby Weather Standby Domestic Fire Special Services Call Fuel Farm Fire Hi-jack - Unlawful Act Bomb Warning in Aircraft Act of Aggression - Ground The orders also serve as a guide to other organisations concerned in emergency actions. Off Airport RFFS response area Off the Aerodrome The Airport Fire Service provide a full response to 2 miles (3km) when an accident occurs outside the Aerodrome boundary. A partial response is provided between 2 miles and 5 miles (3km to 8 km) Accidents beyond the 5 miles do not normally require any action by Airport services, but may do so at the discretion of the Duty Station Manager and on request from the Local Authority Fire service. AFS will inform ATC of the Fire Category
20140701GatwickAeroManv5.0
126
19.2 Testing of Facilities and Equipment
All facilities pertaining to the deployment of emergency service vehicles and manpower are tested on a daily basis.
All equipment used in emergencies is tested and inspected to company or manufacturers standards and recorded on an electronic database system. This database is programmed and monitored by administrators. Key personnel are trained in its use to retrieve and sign off equipment tests.
19.3 Exercises to Test Emergency Plans
Bi-annual exercises involving all the Airport Fire Service and all external emergency services are carried out to test the emergency plan.
20. Rescue and Firefighting Objective
It is the intention of this manual to provide both management and staff with a guide to the processes that achieve an effective and efficient RFFS. It also lists practices and procedures that are adopted at incidents, management of resources and maintaining competence
Fire Station
The RFFS is based in a purpose built fire station that is located at the Junction of Taxiway Romeo and Taxiway Juliet. The location of the fire station enables the RFFS to achieve response times as specified in AMC/GM to Annex iv Part – ADR-OPS-Sub-part B.
The fire station forms a self-contained unit equipped in accordance with Company standards, facilitating an immediate response. e.g. Alarms, emergency communications lines, radios and a PA system. Each is tested and recorded at the change of each watch.
Functionality tests on the appliance bay doors are carried out in accordance with Company standards, and are recorded electronically.
The fire station is subject to a planned maintenance regime co-ordinated by the CMMS and under the auspices of the airport Engineering Department.
The fire station forms part of an established prioritised fault reporting system for the rectification of defects and routine maintenance (see Fig. 1).
20140701GatwickAeroManv5.0
127
Fire Station Faults Procedure
(fig 1)
Fire Station Contingencies
In the event of the fire station being unavailable, detailed contingency plans are in place to afford alternative accommodation for the continuance of operations. The temporary fire station is located to enable the requirements for response to be met.
Loss of services essential to normal operation of the fire station are also contained in the contingency plan document.
Station Manager (S/M)
Each watch has a Station Manager who is responsible for the operational efficiency and
day to day running of the RFFS. The Station Manager reports directly to the Chief Fire
Officer.
Safety Accountabilities
To fulfill the role of Incident Commander at an aircraft accident or incident. On arrival of the
Local Fire and Rescue Service the Incident Commander of the Local Authority Fire Service
may take over this role when there is enough resource to do so and the Duty Station
Manager becomes the Tactical Advisor.
Manage staff and resources to ensure compliance with, and maintenance of, airside safety
standards and recommended practices in accordance with the Aerodrome Certificate,
company standards and EASA/CAA publications.
Day to day liaison with other airport departments with regard to safety and security.
Details entered into Airport Fire Service
electronic file
Engineering issue fault number
Engineering action
and repair fault
Fault reported
Engineering fault desk x1111
20140701GatwickAeroManv5.0
128
To ensure any necessary risk assessments are carried out promptly and accurately and the
findings disseminated to all RFFS personnel.
Compile detailed reports on incidents and make any necessary recommendations for follow
up.
Maintain competence in the role of Station Manager through the approved Maintenance of
Competence Scheme (MOCS)
Disseminate all information to RFFS personnel with regard to Health & Safety aspects, and
company standards.
Initiate immediate inquiries following any accident or incident to members of staff, vehicles
or equipment.
Follow up any safety targets set by the Chief Fire Officer.
Brief crews on any operational safety matters.
Watch Manager (W/M)
Each watch has two Watch Managers who are responsible for the day to day management
of their watch. The Watch Managers report directly to the Station Manager.
Safety Accountabilities:
When required, act up into the role of the Station Manager and assume all of the relevant
safety accountabilities.
To fulfill the role of Sector Commander at an aircraft incident/accident and Incident
Commander at a domestic incident. This role then may be handed over to the Local
Authority Fire Service on their arrival.
Manage staff and resources to ensure compliance with, and maintenance of, airside safety
standards and recommended practices in accordance with the Aerodrome Certificate,
company standards and EASA/CAA publications.
Plan, coordinate and deliver training and assessments for RFFS personnel in accordance
with the approved MOC Scheme.
Brief crews on safety aspects prior to any training exercise.
Compile detailed reports on incidents and make any necessary recommendations for follow
up.
20140701GatwickAeroManv5.0
129
Maintain competence in the role of Station Manager and Watch Manager through the
approved MOCS.
Disseminate all information to RFFS personnel with regard to Health & Safety aspects, and
company standards.
Follow up any safety targets set by the Station Manager.
Brief crews on any operational safety matters.
Crew Managers (C/M)
Each watch normally has two Crew Managers who are responsible for assisting the Watch
Manager with the day to day management of their watch. The Crew Managers report directly
to the Watch Manager.
Safety Accountabilities:
When required act up in to the role of the Watch Manager and assume all of the relevant
safety accountabilities.
To fulfill the role of Sector Commander at an accident and if required the role of the Incident
Commander at a domestic incident. This role then may be handed over to the Local
Authority Fire Service on their arrival.
Manage staff and resources to ensure compliance with, and maintenance of, airside safety
standards and recommended practices in accordance with the Aerodrome Certificate,
company standards and EASA/CAA publications.
Plan, coordinate and deliver training and for RFFS personnel in accordance with the MOCS
Brief crews on safety aspects prior to any training exercise.
Compile detailed reports on incidents and make any necessary recommendations for follow
up.
Maintain competence in the role of Crew Manager through the approved MOCS.
Disseminate all information to RFFS personnel with regard to Health & Safety aspects, and
company standards.
Follow up any safety targets set by the Watch Manager
Brief crews on any operational safety matters.
20140701GatwickAeroManv5.0
130
Firefighter (FF)
The Firefighters, are responsible for carrying out rescue and firefighting duties utilising
appliances and equipment. The Firefighter reports directly to the Crew Manager.
Safety Accountabilities
Carry out the testing and inspecting of all rescue and fire fighting equipment, recording the
results and actioning any defects found.
Take part in training and assessments in accordance with current EASA/CAA requirements
and the approved MOCS.
Drive and operate fire appliances in accordance with the United Kingdom Airside Driving
Permit, the Road Traffic Act and Gatwick Airport Byelaws.
Report any accidents promptly to the Crew Manager or Watch Manager, giving full details
verbally as well as in written reports.
Report any information on any hazards which could constitute a danger to persons or
property or dealing with such hazards such as to minimise the risk.
Follow up any safety targets set by the Crew Manager or Watch Manager.
Ensuring compliance with written safety instructions and verbal instructions regarding
operational safety matters.
Station Complement
The overall accountability and responsibility for the RFFS rests with the Chief Fire Officer.
The total RFFS staffing complement is 81 personnel. This comprises of 1 x Chief Fire
Officer, 1 x Deputy Chief Fire Officer, 5 x Station Managers, 10 x Watch Managers, 8 Crew
Managers and 56 Fire fighters.
RFFS operational personnel are divided into four watches of nineteen personnel with the availability of an additional 3 float managers to ensure that the necessary promulgated fire cover is available during the airport operating hours.
Staffing Levels
The staffing level for RFFS operations at Gatwick Airport has been derived from a Task and Resource Analysis which has been accepted by the CAA. The minimum airfield staffing level for each appropriate category is detailed in the following table.
RFF Category A10 RFF Category A9 RFF Category A8 RFF Category A7
2 x Managers 2 x Managers 2 x Managers
2 x Managers
10 x FF 10 x FF
9 x FF
8 x FF
Total 12 personnel Total 12 personnel Total 11 personnel Total 10 personnel
20140701GatwickAeroManv5.0
131
The planned staffing levels for RFFS Category A9 and A10 fire cover is 16 personnel. This includes 4 personnel that will resource the Domestic Fire Appliance. For contingency purposes the minimum acceptable staffing levels for airfield cover only are detailed in Table 1. Should contingency measures be required the Station Manager shall withdraw the use of the Domestic Fire Appliance to ensure the appropriate minimum staffing levels be maintained, and inform the Local Authority Fire Service and Gatwick Control Centre. This shall then be recorded in the Watchroom Log.
Crew Deployment
Table 1 RFFS Category A10
Vehicle Type – Call Sign Number of Managers
Number of Fire-fighters
Fire 1 - Command and Control Vehicle 1 0
Fire 3 - MFT 1 2
Fire 4 - MFT 0 2
Fire 5 - MFT 0 2
Fire 6 - MFT 0 2
Fire 8 – Rescue Stairs 1
Total 2 10
The primary difference between Cat A9 and Cat A10 is the introduction of the rescue stairs. The management of this equipment in adverse weather is captured in SOP 31. Periodically this vehicle will require maintenance and at such times Fire 2, its crew and equipment will be made available when Cat A10 movements take place.
Table 2 RFFS Category A9
Vehicle Type – Call Sign Number of Managers
Number of Fire-fighters
Fire 1 - Command and Control Vehicle 1 0
Fire 3 – MFT 1 2
Fire 4 – MFT 0 2
Fire 5 – MFT 0 3
Fire 6 – MFT 0 2
Allocated vehicle by SM 0 If required a delayed response by 1 x Watch room Attendant
Total 2 10
20140701GatwickAeroManv5.0
132
Table 3 RFFS Category A8 Table 4 RFFS Category A7
Vehicle Type – Call Sign Number of Managers
Number of Fire-fighters
Fire 1 - Command and Control Vehicle
1 0
Fire 3 – MFT 1 2
Fire 4 – MFT 0 2
Fire 5 – MFT 0 2
Allocated vehicle by SM
0 1 x (Watch room Attendant)
Total 2 7
Domestic Fire Cover
GAL RFFS also provides a domestic fire appliance to protect its infrastructure and assist with business continuity. This resource is also utilised to support special services and requests for assistance. The domestic fire appliance is staffed with 1 x Watch Manager or Crew Manager and 3 x FF and can be called upon to support the normal airfield response to aircraft incidents.
Reduction in Promulgated RFFS Category
Gatwick Airport will endeavour to maintain full RFFS Category A10 Fire Cover during Airport operating hours. It is Gatwick Airport’s policy to carry out a robust maintenance and faults repair system to maintain its fleet of fire appliances. A reserve fire appliance is also available to maintain RFF cover. In the event of a reduction in the availability of the promulgated RFF cover, the Duty Station Manager will determine the resources and personnel available and ascertain what level of RFF Category can be provided. The Duty Station Manager is responsible for informing the Aerodrome Certificate holder, through Airside Operations, of any changes in the level of RFFS protection available. The Aerodrome Certificate holder is responsible for determining the extent to which operations should be restricted and to ensure that arrangements are made to warn pilots and aircraft of any changes in the level of RFF protection available.
Vehicle Type – Call Sign
Number of Managers
Number of Fire-fighters
Fire 1 - Command and Control Vehicle 1 0
Fire 3 – MFT 1 2
Fire 4 – MFT 0 3
Fire 5 – MFT 0 3
Allocated vehicle by SM 0 If required a delayed response by 1 x Watch room Attendant
Total 2 9
20140701GatwickAeroManv5.0
133
Availability of Extinguishing Media
The extinguishing media carried by the RFFS is in accordance with the relevant SOPs. The primary media carried is Moussol Fluorine Free 3% which meets the requirement of ICAO Performance Level ‘B’ foams.
A certificate of conformance is supplied with each delivery of Moussol Fluorine Free 3% foam by the manufacturer and is held on station for auditing purposes. Secondary media carried on each fire appliance is a high performance Dry Powder called Monnex.
Table 5
The above table illustrates normal operation, however, capacities and outputs will vary depending on the type of appliances on the run. This will not affect the Category of the Airport.
Media Reserve The total amount of foam concentrate reserve held on airfield in storage tanks and on appliances exceeds the 200% of the minimum required.
A reserve of 100% of complimentary media is held in approved containers either on appliances or in an approved area. All reserve stocks are available for immediate use and are rotated for shelf life requirements. All appliances carry hand held C02 extinguishers with exception of the Rescue Stairs.
Foam Tests
Foam tests on fire appliances are carried out on a monthly basis as per relevant SOP and an annual test program is in place for testing the foam metering systems and foam solution testing.
Appliance Type
Water Capacity
(Litres)
Foam Capacity
(Litres)
Monitor Discharge Rate
Litres/Min
Monnex Dry Powder (Kg)
Monnex Discharge Rate
Kg/Sec
Fire 1
Command and Control
Vehicle
N/A N/A N/A N/A N/A
Fire 3 MFT 12,500 1,500 5000 70 Kg 1.35kg/sec
(HRET)
Fire 4 MFT
11,200 1,400 5000 250 kg 15.0kg/sec
Fire 5 MFT 12,500 1,500 5000 70 kg 1.35kg/sec
Fire 6 MFT 12,500 1,500 5000 70 kg 1.35kg/sec
Total 48,700 5,900 20,000 460
If available
Fire 7 MFT
12,500 1,500 5000 70 kg 1.35kg/sec
20140701GatwickAeroManv5.0
134
The annual testing is carried out by a trained and approved team, appointed by the Chief Fire Officer and the test records are kept on file.
Where an appliance fails to produce within the parameters specified in company standards for induction, expansion and drainage rate, the appliance will be re-tested following adjustments, to confirm performance.
Where an imbalance exists, between sideline and monitor performance, the test results will be based upon maximum monitor discharge performance.
Dry Powder Unit Tests
All test and inspections are carried out as per company standards and annually tested by an approved agent appointed by the Chief Fire Officer. All certificates are retained on station and all tests are recorded on a data base system. All units are hydraulically tested at 5 yearly intervals and test certificates held on station.
Appliances
The extinguishing media, rescue equipment and personnel provided in line with certification and company standards for the promulgated category will be carried on appliances and/or specialist vehicles.
. Water Supplies
Gatwick Airport has a ring main hydrant system (clean water) and a dirty water hydrant
system. Refer to SOP 009 to understand management of water supplies. Response Times
Gatwick Airport response time and response area requirements are detailed in the RFFS Standard Operating Procedures. The operational objective of the RFFS is detailed in the RFFS Standard Operating Procedures. To ensure these response times are met, each watch carries out regular response time exercises to confirm compliance. Each response time attendance/exercise is recorded on an electronic data base.
For less than optimum conditions Gatwick Airport has special provisions in place (see LVOs).
Low Visibility Operations (LVOs)
To meet response times in less than optimum conditions Gatwick Airport has introduced LVOs. These LVOs form part of the Aerodrome Manual.
To comply with the Aerodrome Manual LVOs the RFFS practise these procedures twice a year by carrying out 1 theory session and 1 practical session. These training sessions are recorded electronically.
Difficult Environs, the 1000m Area and Access Roads
A 1000 metre assessment has been conducted for Gatwick Airport detailing areas of risk and special interest. Any decision to access the 1000 metre threshold area will be dependent on weather conditions, ground conditions and the judgement of the Duty Station Manager at the time of the incident.
20140701GatwickAeroManv5.0
135
In addition, if an accident occurs more than 2 miles from the airport and ‘Rendezvous Point Nil’ has been given, the Duty Station Manager will determine the AFS response to an off airport aircraft crash depending on distance from the airport and size of aircraft. A request for assistance from Local Fire Authority will be considered. AFS will inform ATC of their actions. Accidents up to 2 miles will be a full attendance. Refer to OGN No. 48.
The decision for any attendance off the airfield must be decided by the Duty Station Manager and any subsequent action to alter the category of fire cover remains his responsibility.
Runway Policy
Gatwick Airport endeavours to provide and maintain access for emergency vehicles to attend an incident/accident which may occur on the airfield.
Gatwick Airport has two runways these are 08R/26L (main runway) and 08L/26R (northern runway)
Standby Positions
On instigation of an aircraft emergency (Local Standby up to Aircraft Accident Imminent) the Duty Station Manager will deploy appliances to pre-determined standby positions. The Duty Station Manager has the discretion to change appliance positions as and when required.
Monitoring of the Movement Areas
There are two key viewing points for the monitoring of Aircraft (A/C) movement areas these are ATC tower and the fire station Watchroom.
The ATC tower has the best overall view of the airfield and has overall responsibility for monitoring aircraft movements.
The RFFS Watchroom has a view of the runway and part of the apron / taxi-way area, however there are blind spots to the north which are monitored by ATC. Alerting Procedures - General
The following alerting systems are employed at Gatwick Airport to inform RFFS crews of varying emergency levels and situations. The alerting procedures systems are the :-
Crash Line links ATC and RFFS Emergency line links ATC and RFFS
Gatwick Control Centre (GCC) Direct Line Links RFFS and GCC ATC Liaison Line Links ATC and RFFS Internal Alarm RFFS only 222 links Watchroom and GCC
20140701GatwickAeroManv5.0
136
The following illustrates when and to what level the alerting systems are utilised.
Table 6
Alerting Communication Systems
Type of Emergency Omni Crash line
Emergency line
ATC
liaison line
222 Internal Alarm
GCC
Direct Line
Aircraft Accident X
Aircraft Accident off the Aerodrome X
Aircraft Accident Imminent X
Aircraft Ground Incident X
Full Emergency X
Local Standby X
Weather Standby X
Domestic Call X X X
Special Services X X X
Fuel Farm X
Hi-jack Unlawful Act X
Bomb Warning in Aircraft X
Act of Aggression – Ground X
Alerting Procedure on Station
When crews are on station carrying out non-emergency duties and an aircraft accident imminent or an aircraft ground incident has occurred the crews are alerted by the Crash Line which produces an intermittent siren sound. The emergency message is passed via an omni directional facility and can be heard in all areas of the fire station.
Alerting for all other aircraft related calls is via the emergency line. This line produces an intermittent bell sound. The emergency message is passed via an omni directional facility and can be heard in all areas of the fire station.
For other emergencies the crews are alerted by station alarm and PA system.
The Watchroom Attendant (WRA) follows up all messages by means of R/T and a ‘general message’ to the fire appliances crews
Alerting Procedure off Station
When RFFS crews are off station, all emergency calls are relayed to the watchroom Attendant who in-turn will relay the message by R/T or mobile telephone to RFFS crews. At all times when not on station, the Station Manager, Watch Manager and each appliance carry hand held radios and test communications with the watchroom prior to leaving the appliances.
20140701GatwickAeroManv5.0
137
Should training be carried out utilising any of the training rigs on the fire ground, the Station Manager, Watch Manager or Crew Manager will brief crews prior to commencement of any exercise, that in the event of a call being received during training the nominated safety team or Entry Control Officer (ECO) will give the evacuation signal (Acme thunder whistle) whereupon the crews will respond to their respective fire appliances.
When visiting airport buildings such as Terminals or hangars prior to crews entering, the Station Manager, Watch Manager or Crew Manager will carry out tests on his radio at different locations checking for R/T blind spots. Should any blind spots be found the Station Manager, Watch Manager or Crew Manager will then nominate one of the crews to remain on the fire appliance to maintain a radio watch. On receipt of a call the crew member will inform the crews by sounding vehicles horns or by entering the premise and sounding the acme thunder whistle or by any other pre-determined signal which the crews must be pre-briefed on.
Equipment
There is a comprehensive range of rescue equipment available which complies with the relevant SOP. All equipment is tested and inspected to the criteria set in company or manufacturers standards. All test results are recorded on a data base system and appropriate certificates of serviceability are held on file for auditing purposes.
Medical Equipment
Gatwick Airport carries medical equipment as required by SOPs and EASA/CAA regulations
Equipment Testing and Faults Procedure
All test and inspections of equipment are carried out to company or manufacturers standards and recorded on an electronic database system. This database is programmed and monitored by administrators. Key personnel are trained in its use to retrieve and sign off equipment tests.
On notification of equipment failure the duty W/M or C/M will annotate records, inform the duty Station Manager and Watchroom Attendant. He will contact the necessary repair agents and seek replacement equipment.
Training Policy
It is the policy of Gatwick Airport to ensure that all RFFS personnel are trained and assessed in accordance with EASA/CAA regulations and the approved MOCS. All RFFS personnel hold a current certificate of competence to the appropriate standard as agreed with the regulatory authority. All training records are held on an electronic database for auditing and inspection purposes.
Certification/Revalidation
Firefighters (FF): Trainee Firefighters (TFF) who have successfully completed an Initial Fire-fighting Course, will maintain competence through the approved MOCS.
When promoted to a higher role, the individual will attend the relevant Crew Commander or Supervisors course as soon as is practically possible.
20140701GatwickAeroManv5.0
138
Crew Managers will be qualified to Crew Commander level and revalidate their certificate of competency every 4 consecutive years. Station Managers and Watch Managers will be qualified to supervisor level and revalidate their certificate of competency every 4 consecutive years.
First Aid
All RFFS personnel staff are qualified in IEC (a minimum of Basic level). New recruits will be working towards this standard as soon as practicable.
LGV
Gatwick Airport policy is that all RFFS personnel hold a valid LGV licence.
On successful completion of an approved Initial Firefighting Course, TFF and FF will, as soon as is reasonably practical, be trained at a DSA approved driving training school to obtain an LGV licence.
All TFF/FF who obtain their LGV licence, will be supplied with further driver training on all vehicles that they will be expected to use to carry out their respective duties. Gatwick Airport RFFS have a core of Driving Assessors and Emergency Response Driving (ERD) Instructors. Their function is to ensure that each TFF/FF is trained to the guidelines listed in SOPs.
Specialised Training
Gatwick Airport RFFS provide specialist training for selected personnel. The disciplines selected are: Road Traffic Collision Instructors, Breathing Apparatus Instructors, Emergency Response Driving Instructors, First Aid Instructors. All specialised training is carried out by Training Providers with staff gaining appropriate certification. All other RFFS personnel receive training by qualified staff pertaining to the specialist subjects.
. Station Training
Gatwick Airport RFFS carries out a comprehensive training program as required by EASA/CAA regulations and the approved training schedule includes mandatory disciplines such as heat training. The training encourages staff awareness of the health and safety culture implemented at Gatwick Airport. All staff are provided with health and safety training annually, this training encompasses Equipment, Hearing Protection, PPE, Manual Handling and the Environment. All training is recorded on a data base.
Fire Training Ground
The fire training ground provided at Gatwick Airport enhances and complements the approved MOC Scheme. There is a purpose built unit to provide fire behaviour training and heat training.
In order to conform to Management of Health and Safety 1999 and the PUWER (Provisions and Use of Work Equipment). Risk Assessments are carried out on each training rig every three (3) years or whenever any modifications have been made. Selected personnel are trained in the safe operation of all training units.
20140701GatwickAeroManv5.0
139
The Fire Training Ground conforms to company standards and local rules document “Gatwick Airport Fire Ground Safety Pre-checks.” The training units are subjected to test and inspections before and after use, quarterly, six monthly and annually by both RFFS and a nominated manufacturer. All Faults are reported on the 1111 fault reporting system.
Selection of Personnel
Gatwick Airport is an equal opportunities employer, conforming to the United Kingdom employment laws. Potential recruits must progress through the Gatwick Airport Fire Service recruitment process.
Gatwick Airport policy is that all RFFS personnel will be medically assessed periodically. Medical assessments are carried out by the Occupational Health Department at Gatwick Airport. Gatwick Airport Fire Service operates a flexible retirement policy.
Medical Services
In accordance with AMC/GM to Annex iv Part – ADR-OPS-Sub-part B. Gatwick Airport shall arrange to have sufficient medical supplies, available on or in the vicinity of the airport, to treat the passenger and crew capacity of the largest aircraft normally using the aerodrome. Experience has shown, however, that more than one aircraft may be involved in an aircraft accident. Consequently, medical supplies to handle this possibility have been determined accordingly.
This equipment fulfils our medical needs analysis. Medical equipment required is held by GAL Airside Operations. The equipment is housed on a dedicated mobile incident vehicle and will be deployed as per Gatwick Emergency Orders by GAL Airside Operations.
RFFS vehicles also carry equipment to deliver medical provision in accordance with local agreements with South East Coast Ambulance Service NHS Foundation Trust. The equipment will suffice to deal with Medical Emergencies as well as Trauma related incidents including Defibrillation.
Emergency Trailer
The Emergency Trailer is stored undercover near the Airside Operations Building, with its batteries on a constant trickle charge.
An Airside Operations Manager or Representative will routinely inspect the Emergency Trailer and carry out an inventory check at least every two months. There is a form left in the trailer indicating when these inspections have taken place and any comments added.
Fixed to the inside of the trailer is a detailed inventory list with any expiry date indicated against the item.
Major Incident Vehicle (MIV)
The MIV is stored undercover next to the Airside Operations Building, with its batteries on a constant trickle charge.
The MIV is subject to a weekly inspection which includes running the engine, checking the tyres and general condition.
An Airside Operations Manager or Representative will routinely inspect the MIV and carry out an inventory check at least every two months. .
Fixed to the inside of the MIV is a detailed inventory list with any expiry date indicated against the item.
20140701GatwickAeroManv5.0
140
21. Aircraft Recovery
The Policy and management for the removal of disabled aircraft is outlined in the GAD - Aircraft Recovery and satisfies the Aerodrome Certificate requirement for a plan for the removal of disabled aircraft. Responsibility for the management of aircraft recovery resides with the airline operator or aircraft owner, in liaison with the GAL Head of Airside Operations or his representative. Only staff authorised by the aircraft owner are permitted to remove the aircraft. GAL staff will only assist if authorisation from the aircraft owner is received and will not be liable for any loss or damage resulting from the use of this equipment, materials or personnel during the recovery operation. GAL will keep a record of all events and decisions taken during the recovery operation, supplemented by sketches, photographs, video and drawings of the site.
22. Aviation Fuel Management and Dangerous Goods
Aviation Fuel
GAL itself does not store or supply aviation fuel or supply fuelling facilities at Gatwick. It has a lease arrangement with The Gatwick Airport Storage and Hydrant Company Ltd (GASHCO) based at Gatwick, which is the delegated authority under Part 27, Article 217 of the ANO. Details and procedures regarding fuelling operations are given in the GAD - Fuelling of Aircraft.
GASHCO - Operations, Audits/Inspections and Aviation Fuel Operations are carried out in accordance with the agreed Oil Industry procedures and standards of
the Joint Inspection Group (JIG) guidance document for ‘Aviation Fuel Quality Control & Operating Procedures for Joint Airport Depots and Hydrant Systems’.
The guidance document does not preclude the use of other operating procedures, equipment or inspection procedures that may be in place to meet the needs of local requirements.
Audits/Inspections
The joint facilities (GASHCO) are inspected twice a year by one of the participants (JIG member) not less than twice a year Annual Audit by the Group Inspector of Shell UK to ensure continued compliance with procedures and work instructions of the Shell Aviation Quality & Environmental Management System (accredited to BS EN ISO 9002) Annual Audit by the British Standard Institute to ensure continued certification to The Management Standard BS EN ISO 9002. Other Annual audits – these may be carried out on occasions by the CAA, FAA and airline customers
As part of the GAL CMS procedure, in accordance with ADR.OPS.B.055, Airside Compliance will conduct an annual monitoring verification audit of the organisations (GASHCO) involved in storing and dispensing fuel to aircraft. This is to verify that they have procedures to ensure aircraft are provided with uncontaminated fuel of the correct specification.
Aviation Fuel Jet A-1 meeting the most recent issue of the Aviation Fuel Quality Requirements for Jointly Operated Systems (AFQRJOS) and the most stringent requirements of the following three specifications: British Ministry of Defence Standard DEF STAN 91-91 (NATO Code F35) ASTM Standard Specification D 1655 97 International Air Transport Association (IATA) Guidance Material
20140701GatwickAeroManv5.0
141
The four into-plane operators are:- Northair – BP,Q8,Total, Valero Esso/ASIG Shell/ASIG
The document AFQRJOS Joint Fuelling Check List for Jet-A-1 has the agreement of the major oil companies (AGIP, BP, Caltex, Elf, Esso, Fina, Kuwait Petroleum, Mobil, Shell, Statoil, Texaco and Total).
Some of the foregoing information is referred to in EASA ADR.OPS.B.055 using CAP 748 for
guidance. Dangerous Goods The Gatwick Airport Directive – GAD - Liquid Storage, Use and Disposal – sets out the regulations
and procedures to be adhered to. The above GAD applies to all individuals working at the Airport and sets out the necessary
control and procedures that must be followed to prevent unauthorised or uncontrolled discharges to foul or surface water systems and to prevent land contamination. A wide variety of potentially polluting liquids are stored in containers ranging in capacity from a few litres, to 50,000 litres. Liquids can be stored in small containers, drums, intermediate bulk containers (IBC's) of 1000 litres and fixed bulk storage tanks. Examples of liquid substances in use at Gatwick include oil, fuel, lubricants, greases, solvents, degreasing agents, battery acid antifreeze, detergents, chemicals, paint, aircraft / runway de-icers, herbicides firefighting foam concentrate.
23. Low Visibility Operations
During periods of reduced visibility it is essential to restrict airside activities so that aircraft movements can continue safely. A pilot's vision can be severely restricted during these conditions; therefore, his route must be kept clear of all possible obstructions. There is also a requirement to safeguard the various navigational aids on which the pilot relies in low visibility.
Low Visibility Operations are therefore designed to protect the runway from intrusion by vehicles or other aircraft and to protect the signals transmitted from the Instrument Landing System (ILS), regardless of the category of approach available.
Operating procedures during low visibility are detailed in the Gatwick Airport Directive - GAD – Low Visibility Operations and in the Manual of Air Traffic Services – Part 2. The GAD is an appendix to the Aerodrome Manual.
Instrumented Runway Visual Range (IRVR)
IRVR is available for runways 08R/26L and 08L/26R. The IRVR system is considered to be operational at all times unless notified otherwise by ATC Engineering.
Manual assessment of RVR is not available at Gatwick.
IRVR values are to be passed to inbound and outbound aircraft whenever an IRVR value is displayed (subject to serviceability). If the touchdown transmissometer is unserviceable, the mid-point reading is to be used.
IRVR values are not broadcast on the ATIS.
20140701GatwickAeroManv5.0
142
24. Procedures for Winter Operations
GAL Airside Operations publish an Aerodrome Adverse Weather Plan, which includes the
Aerodrome Snow Plan annually, prior to the commencement of the winter period.
The Aerodrome Snow Plan is published in accordance with the requirements of UK AIP AD 1.2.2
Snow Plan and AMC/GM to Annex iv – Part ADR-OPS – Sub Part B – Operations in Winter
Conditions. The plan covers all airside areas including runways, taxiways, aprons, roads,
passenger walkways etc.
The Aerodrome Snow Plan is effective from 1 November to 31 March annually and is issued
with the agreement of all affected Parties
The aim of the Aerodrome Snow Plan is to provide information relating to procedures to keep
the Airport open for operations as far as is reasonably practicable. The actual plan to be adopted
by the Aerodrome Snow Coordinator (SNOCO) / Airside Control Lead (ACL) in consultation with
the Airport Silver Command and Joint Business Continuity Team (JBCT) will have regard to such
factors as:
Severity of the snow conditions
Forecast weather conditions
Time of day/night
Traffic movements expected
Staff and equipment available
The Aerodrome Adverse Weather Plan is an attachment to the Aerodrome Manual.
25. Strong Wind Warnings
In addition to procedures for winter operations and low visibility, there are procedures to be followed in the event of a strong wind warning.
Strong wind conditions can give rise to hazards from wind-blown items and in very strong winds there is a possibility of structural damage to aircraft. The principle threats are of engine ingestion or airframe damage to aircraft on stands, taxiways and runways. There is also a danger of personal injury for airside staff and damage to vehicles and equipment.
When warnings of strong winds are received by Airside Operations, the details of the warning will be communicated by various means to other relevant parties.
Full details of the procedures are contained in the Gatwick Airport Directive – GAD – Strong Wind Warnings.
26. Night Operations
There are restrictions on the operation of aircraft at night at Gatwick Airport. The night period is defined as the period between 2300 hours and 0700 hours (local time). This period will apply to all days of the week. Full details of the restrictions are contained in the Gatwick Airport Directive – GAD - Operation of Aircraft at Night.
27. Protection of Radar and other Navigational Aids
Instrument Landing System (ILS) Critical Area
The critical area for the ILS is defined by markers and signs. Permission must be obtained from the ATC Duty Engineer for entry to this area.
20140701GatwickAeroManv5.0
143
Aerodrome Works
ATC approval and Daily Works Permits are required to ensure proper coordination and safeguarding of any activity in these areas and before works start. ATC Engineering approval may also be required.
Airside Driving
Specific rules apply for those drivers required to operate on the manoeuvring area. The GAL Manoeuvring Area Driver Training Manual states:
The Localiser and Glide path aerials have protected safeguarded areas around them to provide integrity of the signals. These areas are free from objects and entry by personnel and / or vehicles is strictly prohibited. These areas are known the ILS Critical Areas; anything entering these areas will have an adverse effect on the signals projected by the aerials.
Even if the runway is only being used for departures or is closed – you must still not enter the Critical Areas without obtaining permission.
28. Procedure for Operation of Aircraft with Higher Code Letter
A380 aircraft - Taxiway routes available to A380 are shown on aerodrome chart AD 2-EGKK-2 1, marked in yellow. There is a positive but substandard obstacle clearance (minimum of 47.5 m) on Taxiway Juliet A380 routing. Pilots are to ensure that Cockpit over Centre-line (COCL) technique is used at all times when manoeuvring at Gatwick.
29. Prevention of Fire at the Aerodrome
Gatwick Airport Directive – GAD – Fire Training Dates – states:-
All organisations at Gatwick are required to make adequate arrangements to provide fire training for their employees annually. An organisation may train their own staff providing it has trainers who have attended an approved GAL Fire Trainers course within the last 3 years and hold a current valid GAL Fire Trainers certificate. Alternatively they can make arrangements with any other qualified trainers from an approved organisation, provided the training content has been approved by the GAL Fire Safety Advisor. There is also an opportunity to send staff to one of GAL's fire training sessions. Records of all fire training given to employees must be maintained by each organisation and made available for inspection by the Airport Fire Service, County Fire Service and/or Health and Safety Representative.
GAL places the utmost importance on the capabilities of the trainer in achieving and preserving the high standard of the fire training that the Fire Certificate for the building demands. Companies will therefore be subject to periodic audits by the GAL Health & Safety department who will attend one of the fire training sessions in order to ensure that the standards are maintained to the required level. Fire training courses are mandatory and therefore if a member of staff fails to attend, they stand the risk of having their ID withdrawn or refused. The GAL EHS Performance Standard requires the airport to develop an Airport Fire Safety Plan. The purpose of the Gatwick Airport Fire Safety Plan is to set out how fire safety risk is to be managed and controlled in order to operate a safe and secure airport. Accordingly, the Gatwick AFSP and its implementation will
explain the governance and management arrangements for fire risk management
provide the necessary information for effective and efficient fire safety management
ensure management and staff are aware of their responsibilities for fire safety management and are suitably trained
20140701GatwickAeroManv5.0
144
be compliant with current fire safety legislation, all relevant statutory controls and consistent with BSI fire safety management standards
co-ordinate with local fire service, buildings’ insurers and other stakeholders in the management of fire risk
ensure third parties tenants and operators understand their responsibilities and obligations within the AFSP.
30. Procedure for Calculating Reduced Declared Distances
In the event of runway 08R/26L becoming unavailable due to temporary objects infringing the strip, obstacle limitation surfaces or a surface breakout on the runway, the Airside Operations Manager will consider activating runway 08L/26R. GAL has a loss of runway contingency plan for 08R/26L. The plan does not require any re-declaring of distances and the preferred option is to switch to 08L/26R.
31. Isolated aircraft parking position The Isolated aircraft parking position is described in the Emergency Orders, as follows:-
Air Traffic Control will endeavour to direct the aircraft to the Juliet Pan or, if circumstances do not allow this, to an area agreed between GAL Airside Operations and the Police Incident Officer. Note – If Air Traffic Control cannot obtain the agreement of those in command of the aircraft to stop in a preferred area, then every effort must be made to get the aircraft to stop in a place that will cause the least interference or hazard to other aircraft, life or property.
20140701GatwickAeroManv5.0
145
32. List of Attachments and Available Supporting Information to the Aerodrome Manual
1:2500 Aerodrome Map – Available on Request
Adverse Weather Plan Change Control Procedure Conditions of Use
Gatwick Airport Driving Manual – Available on Request Gatwick Risk Management Procedure
London Gatwick Bye-laws Gatwick Airport Directive Low Visibility Operations
20140701GatwickAeroManv5.0
146
33. Deviation and Action Document
Deviation and Action Document
No. Date Relevant Certification
Specification (CS)
Description of non-compliance Reference to
supporting
documentation
Expiry
date
1
11/06/2014 CS ADR-DSN.H.435
Take-off climb surface
Aircraft parked on Pier 1 stands 2 to 5, will infringe the 08L Take Off Climb Surfaces on completion of the project. (Max 4m infringement on stands 2 and 3)
To be promulgated on the Type A chart.
Approved by SRG in the Part 1 submission for the project, as an improvement over the previous infringement.
2
11/06/2014 CS ADR-DSN.H.435
Take-off climb surface
Concorde House penetrates the Take Off Climb Surfaces for runway 08L by 14.3m
Promulgated on the Type A chart.
3 20/08/2014 Chapter D - Taxiways Code E taxiways used for Code F A380 operations
Safety Assurance document for A380 Operations at Gatwick
4 20/08/2014 CS ADR-DSN.D.240
Taxiways general
Code E taxiways used for Code F A380 operations
Safety Assurance document for A380 Operations at Gatwick Airport
5 20/08/2014 CS ADR-DSN.D.245
Width of taxiways
Code E taxiways used for Code F A380 operations
Safety Assurance document for A380
20140701GatwickAeroManv5.0
147
Operations at Gatwick Airport
6 20/08/2014 CS ADR-DSN.D.250
Taxiway curves
Code E taxiways used for Code F A380 operations
Safety Assurance document for A380 Operations at Gatwick Airport
7 20/08/2014 CS ADR-DSN.D.255
Junction and intersection of taxiways
Code E taxiways used for Code F A380 operations
Safety Assurance document for A380 Operations at Gatwick Airport
8 20/08/2014 CS ADR-DSN.D.260
Taxiway minimum separation distance
Code E taxiways used for Code F A380 operations
Taxiway Juliet, between Juliet 8 and Juliet 5 is restricted during take-offs or landings on runway 08L/26R due to non-compliant separation distances between centrelines
Safety Assurance document for A380 Operations at Gatwick Airport
Promulgation of restrictions in EGKK AIP
9 20/08/2014 CS ADR-DSN.D.315
Width of taxiway strips
A number of taxiway strip widths are not EASA compliant
Promulgation of restrictions in EGKK AIP
10 20/08/2014 CS ADR-DSN.M.750
Apron floodlighting
A number of aircraft stand lighting lux levels are not EASA compliant
Programme of LED apron floodlighting installation in place. Results on LED installations are beyond compliance
20140701GatwickAeroManv5.0
148