Aerial Fire Truck
of 5
Transcript of Aerial Fire Truck
-
8/10/2019 Aerial Fire Truck
1/5
RT-100 Industrial Joystick
Potentiometer sensor or Hall sensors
Single axis or two axis Control
High-intensity lever and excellent proportional control or switch output
Easy to install, flexible operation, uniform texture, maintenance-free
Sealed up to IP65
RT-100 industrial joystick, is mainly used in hydraulic proportional control or variable
frequency motor control, such as Rotary Table (drilling rig), Aerial Fire Truck, Crane, Shield
Tunneling Machine, Oil Hoist, etc.
Environment Parameter
Operating Temperature -40C ~ +80C, -25C ~ +80C (micro switch)
Protection Grade IP65
Vibration Amplitude3g, Frequency: 10Hz-200Hz
Impact 20g, 6ms, Semi-sinusoidal
EMC Anti-interference Rank100V/m, 30MHz to 1GHz, 80% sine-wave modulation,
meet EN50082-2 (1995) standard
EMC Emission Rank Rank B, 150KHz to 30MHz, meet EN50081-2 (1993) standard
ESD Anti-interference RankRank 4, 8KV contact discharge,15KV air discharge,
meet the IEC61000-4-2 standard
Mechanical Parameter
Mechanical Angle Potentiometer: 32, Hall: 20
Operating Torque 15N (50N max)
Mechanical Life 5 million
Mechanical Error 0.5
Electrical Parameter
Hall
Power Supply Voltage 50.5V DC
Power Supply Current Consumption 6.5mA/hall sensor
Resolution Ratio infinite
Product Features
Application
Technical Information
1- 5 [email protected] | www.runntech.com
-
8/10/2019 Aerial Fire Truck
2/5
Maximum Voltage 15VDC
Reversed Polarity Maximum Voltage 14.5VDC
Load Resistance 5K
Median Voltage (no-load) 48 - 52%Vs
Potentiometer
Power Supply Voltage DC24V
Power Supply Current
-
8/10/2019 Aerial Fire Truck
3/5
V6: DC24V 0 ~ +5V (voltage output)
I1: 4 wire 4mA~12mA~20mA (current output)
I2: 4 wire 20mA~4mA~20mA (current output)
Potentiometer Type
Could choose 5k or 10k potentiometer, it also can be customized (1k or 20k potentiometer)
Quantity of Switch Signal
01, 02 and 03, it also can be customized
Common Closed Position
Quantity of Buttons
BT1: one button
BT2: 2 buttons
Q: Rocker switch (For customized, please contact us)
Handle Type
HD1, HD4 and HD7 can work with button
HD10 & HD15 can work with 2 or more buttons, it also can work with rocker switch
HD2, HD4, HD5 and HD6 also can work without button
Remark: Remarks from clients
3- 5 [email protected] | www.runntech.com
-
8/10/2019 Aerial Fire Truck
4/5
Wiring Instructions
Potentiometer Output DC24V Power, Voltage, Current Output
Hall Voltage Output
4- 5 [email protected] | www.runntech.com
-
8/10/2019 Aerial Fire Truck
5/5
Product Instal lat ion
HD1HD2 HD3 HD4 HD5
HD15
HD6
HD8
HD7
HD10
5- 5 [email protected] | www.runntech.com
