Aeolus Co2 Pump
-
Upload
oscar-langley -
Category
Documents
-
view
227 -
download
1
description
Transcript of Aeolus Co2 Pump
AEOLUSCo2 TYRE INFLATOR
VALVE CAP
VALVE BUMPER
Co2 SEAL
SLIDER
Co2 SEALS
SPRING
CAP
MAIN HOUSING
Co2 CANISTER
CANSITER HOUSING
Injection moulded ABS
Valve bumper provides air-tight seal and cushioning when pressure is applied to bike valve.
Provides further sealing and allows valve cap to fit tightly to slider.
CNC steel valve slider with extrusion allowed air to pass through from Co2 canister to main housing to bike tyre.
Three injection moulded rubber seals provide airtight seal.
Steel spring keeps Co2 from leaking out when pump is not in use.
Injection Moulded ABS Cap emulates spray can.
CNC Steel provides main housing for pump mechanism. Extrusion at 10 degree angle provides ergonomic pumping
Aluminum canister with pressurised Co2.
Injection moulded ABS canister hous-ing provides protection from freezing when Co2 is released.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1)(2)
(3)(4)(5)
(6)(7)
(8)
(9)
(10)
Grooves in the mechanical housing allow the overmoulded cap snap in place holding the two securely together without any form of adhesive.
Locked ProfileThe spring applies pressure outwards keeping Co2 from escaping. Silicone seals keep the mechanism airtight.
Open ProfileWhen pressure is applied on the the bicycle valve.the valvue slider opening comes into contact with the main housing releas-ing the Co2.
AEOLUSCo2 TYRE INFLATOR 36.00
14
11.00
124
.00
29.
50
12.00
TRUE R4.00
12.0
0
1:1 Scale Drawing VALVE SLIDER The sole moving part in the AEOLUS pump. The CNC Valve slider with an extruded centre allows air to pass through it from
the Co2 Canister to the bicycle tyre. Grooves along the body allow for the vari-
ous sizes seals to fit firmly and prevent escaping air.
RUBBER SEALS Essential to keep the whole system air tight, the seals not only allow the valve slider to move smoothly through the pump-ing mechanism, but allow areas in the pump to remained sealed off whennot in use. There are a total of 4 ringed seals in AEOLUS, without them, the wholesystem would fail.
LOCKING SPACER This essential component is the final peice in the puzzle, the one component that holds the whole mechanism together.
Clipped into the valve slider when in place, the steel locking spacer stops the spring from pushing the valve slider out of the main pump housing and the whole system becoming undone.
73
68.157
2
56
30
22
Slide out decal panel allows store owners to change the product the stand holds easily. The card on the decal panel is the same as that of the AEOLUS packaging, eco-friendly and bio-degradable.
Keeping with the sustainability direction of the packaging, Soy
based inks will be used for printing on the card. The soy inks dry slower than conventional petroleum based inks yet once dry have the same vibrancy in color and can cause no hard to the environment upon disposal. Their biodegradability means that along with the card, they can be disposed and for-gotten.
TWIST TO FASTENThe simple card packaging is held onto the product by the AEOLUS iitself. The canister housing is inserted into the circular opening in the packaging. The top cap is then placed ontop and twisted into place. The two facing packag-ing panels are then stapled together.
AEOLUSPOINT OF SALE
PACKAGING &
ABS VALVE CAP
SILICONE VALVE BUMPER
SILICONE SEAL
SILICONE SEAL x3
LOCKING PIN
REVOLVED OPENING
Co2 CANISTER PIN
Prevent Co2 from escaping when not in use.
Locking pin inserted to keep tension on spring and prevent slider from coming apart.
Revolved extrusion allowing Co2 to pass through despite .25mm holes not being in line.
Pokes small hole in the top of the Co2 canister when screwed in.
Protects valve bumper and encloses bicycle valve when
pumping. Accomodates Shrader and
Presta valve types
Provides cushioning and pro-tects valve and pump when
in use.
Allows for a snug and secure fit of the valve cap to the
slider.
Replacing the Co2 Canister1. Twist to remove the canister housing.2. Remove the Co2 canister and replace with a brand new one.
The simple push to inflate mechanism provides quick inflation on the go. To stop inflating, simply pull the pump off the tyre valve.
AEOLUS is small enough to fit in almost any saddle bag, so taking it with you on all rides is hassle free.
AEOLUSCo2 TYRE INFLATOR
USABILITY
INITIAL CONCEPTS
STYLEBOARDS