_AEML8181 20070928.pdf

ARTICLE DESCRIPTION - LO TechPack reviewed (p)

Status: / Finalisation Sample 26.09.2007

AEML8181 ( 24786 ) Knitted Hoody / Factory: SINTEX INTERNATIONAL/CHINA

Priority:N Season:Date:Page:

28.09.20070001

08 / 02

R3 Dev.:Sample S.: CAD:Size Page:Sizes (src):

Pattern Info:

Product Type: Gender / Age Group:42;46;50;54;58;62

54 Lyster, Jane Wilton, Tony

(IMX3222F08) INT. MEN´S JACKET TRAINING KNITTED SET-IN SLEEVE FITTED (27.09.2007)(IMX710XF08) INT. MEN´S HOOD 2-PIECE KNITTED (W/O ZIP) ( . . )

Sweatsh. (long sl.) Male / Adults

Top Front Top Back

adidas PROPRIETARY AND CONFIDENTIAL INFORMATION: This document contains proprietary and confidential information belonging exclusively to adidas. If you are not an intended and authorized recipient of this document, you are hereby notified that any dissemination, copying or use of any information in this document is strictly prohibited by law. If you have received this document in error or without authorization, please immediately notify adidas. © by adidas AG, 2007

Detail Sketches:


Status: / Finalisation Sample 26.09.2007AEML8181 ( 24786 ) Knitted Hoody / Factory: SINTEX INTERNATIONAL/CHINA

Season:

Date:

Page:

28.09.2007

0002

08 / 02

Artwork 7775 - Element 101

Print line 1

Detail-Sketch-No.:

Position:

Description:

Artwork 7775 -Element 102

Print line 2

Detail-Sketch-No.:

Position:

Description:


Detail Sketches:



Season:

Date:

Page:

28.09.2007

0003

08 / 02


Print line 3

Detail-Sketch-No.:

Position:

Description:

Artwork 7049 - Element 104

RBK & WORDING

Detail-Sketch-No.:

Position:

Description:


Detail Sketches:



Season:

Date:

Page:

28.09.2007

0004

08 / 02


Background print

Detail-Sketch-No.:

Position:

Description:

Artwork 7775 Placement6

Inserted onto lining on inside, right hand side of jacket

Detail-Sketch-No.:

Position:

Description:


Detail Sketches:



Season:

Date:

Page:

28.09.2007

0005

08 / 02

Back yolk fabric placement7

Stripe direction

Detail-Sketch-No.:

Position:

Description:


633329Part - Definition / B.O.M Article No.Q3

633317Q3

CCN1 CCN2

Season:

Date:

Page:

28.09.2007

0006

08 / 02ARTICLE DESCRIPTION - LO TechPack reviewed (p)


MaterialCaution:does not pass pilling magnet f08-

rreflective poolf08-r

To main body fabric, front, back, sleeves, hood &010 2.05 yd; !

Ref. No.: 27856 ; weftknitted ; 100% CO A239A23Einsert to back right hand sleeve.jacquard ; Striped jacquard knit ; 310 gFar Eastern (Taiwan) ; 7RDM032 ; 70 "*Fabric to back yolk is to be cut horizontal so it30/s cotton ; 14is contrast to main body. Please see sketch*Ref.No: 27856, see Part.No 10 for details reflective

poolf08-rmagnet f08-r

Contrast colour insert to left hand side as worn020 0.10 yd; !

A23EA239back sleeveRef. No.: 17204 ; weftknitted ; 100% CO magnet f08-


Applied as lining to main body, front & back also025 1.83 yd; !

single jersey ; 160 g A239A23Eto sleeves & hoodfabric enzyme washed / silicon finishTop Star (China) ; TRD-240265 ; 52 " ; 28 ; 26/1from: 0.6 mmRef. No.: 20410 ; warpknitted ; 100% PES ; tricot magnet f08-


Along CF and hood opening edge continuing along CF

030 0.13 yd; !

PES shiny ClimaLite ; 220 g A239A23Eopening edge to create double piping to concealbrushed back / hydrophilic finishCF zip. To be 0.8cm.Fu Hsun (Taiwan) ; 60124A-AH ; 60 "Also for back neck tape & drawcords to hood75D/72F + 100D/36F ; from: 1 mmRef. No.: 17204 ; weftknitted ; 100% CO rbk redrbk redPiping to outer centre back seam (see sketch)035 0.20 yd; !single jersey ; 160 g A1Q6A1Q6fabric enzyme washed / silicon finishTop Star (China) ; TRD-240265 ; 52 " ; 28 ; 26/1from: 0.6 mmRef. No.: 14885 ; weftknitted ; 95% CO/5% EL magnet f08-


To hem and cuffs040 0.29 yd; !

circular rib ; 1x1 circular rib ; 350 g A239A23E1x1 circular rib ; 16

(! = Special Material Usage Only)(* = Reference Material not yet tested by adidas-lab)



633317Q3

CCN1 CCN2

Season:

Date:

Page:

28.09.2007

0007



AccessoryRef. No.: 27934Centre front zip openings200 1 pcszipper, metal 5, open end, reversibleautomatic lock ; N - Puller 7454metal - nickel free ; antique silverYKKconcealedConcealed by pt#30 pipingReversable zip coil #5 open ended zipantique silverThis is reversable so it can be attachedto style AEML8180 as an inner jacket.

magnet f08-r

reflective poolf08-r

10: zipper tape

A239A23ERef. No.: 26835 ; badge, woven ; woven badgeApplied to back of garment at right hand210 1 pcsas sample ref7059 ; 100% PEShand side as worn, 2.5cm up from welt,W x H: 25.00 x 25.00 mm4cm in from side seamPaxarAdditional colour 2 (pantone 1) - Coatssylko metallic MT014

blackblack10: backgroundA1R8A1R8magnet f08-r

magnet f08-r

20: add col 1

A239A239pantone 1pantone 130: add col 2A0ZBA0ZB

Ref. No.: 26847To welt pocket openings220 2 pcszipper, metal 3, closed end,antique silvautomatic lockN - puller metal antique silver #7454metal - nickel free ; antique silverYKK YGRTHC-36 DARE 031 H61 zipper to each welt pocket opening onthe front of the garment



633317Q3

CCN1 CCN2

Season:

Date:

Page:

28.09.2007

0008



Accessorymagnet f08-r

reflective poolf08-r

10: zipper tape220

A239A23E(all msmts given for sample size only - for production msmts pls see size spec!)

WorkmanshiphoodTo neck line4002 pieced, lined

Pt#10 2 piece hood, with drawcordchannel

Pt#30 inserted, flat piping, 0.8cm deep

Grown on drawcord channel to hood edgebefore piping starts

Pt#30 drawcord to hood 0.8cn widevertical buttonholeTo either side of drawcord channel at405

centre front hoodFor drawcord to exit throughvertical bartackTo centre back of drawcord channel to408

secure drawcordlockstitchTo upper edge of displaced shoulder &4101,5 mm (edge)sleeve seam

To edge of CF openingTo edge of armhole seam

chainstitchTo hood edge to create drawcord channel420

2.5cm deeprib cuffTo sleeve openings430

Pt#40, 6cm deep



633317Q3

CCN1 CCN2

Season:

Date:

Page:

28.09.2007

0009



Workmanshiprib waistbandTo hem440

Pt#40, 6cm deepdart8cm in from side seam starting above445

welted waistband32cm long darts running upwards on bothsides of hoodywelt pocketInto front darts centrally450reversed entry

Entry from inner side with zipper #26847horizontal bartackTo end of each dart at front to secure460

Displaced shoulder seam & extended470Front dropped forward by 4cm at shouldersleeve seamseam & to extend into a seam at thefront of the sleeve down to the cuff.

Back dropped backward by 4cm at shoulderseam & to extend into a seam at theback of the sleeve down to the cuff.

To sleeve seam at back, above cuff480Pt#20 insert to the left hand sidesleeve as worn

Pt#10 insert to the right hand sidesleeve as worn

Dimentions - 13cm deep, 8cm wide atbottom, 0cm at top



633317Q3

CCN1 CCN2

Season:

Date:

Page:

28.09.2007

0010



ArtworkLogo 7422To front, left hand side of garment as600

worn. 1.5cm in from dart, 1.5cm up fromRaised RBK embroiderywelt.High build embroidery blackblack10: Main emb

A1R8A1R820: Foam fill (as per approved quality)

7775 - 3 col print XS-XXLSize:To be applied to inside of garment at61024.7CMHeight:the back righthand side as worn. So can

3 col print 31CMWidth:only be seen on inside. This shoulddissapear into the welt seam & therighthand side seam (please see sketch)

For pantone 1 please use:Pantone #5517U

Flat print reflective poolf08-r

pantone 110: Print line 1 - See detailed sketch

A23EA0ZBFlat print stuccoclever blue

f08-r20: Print line 2 - See detailed sketch

A1R4A237Flat print rbk redrbk red30: Print line 3 - See detailed sketch

A1Q6A1Q67049 - Bk nk print xs - xxlSize:Applied centrally to inside back neck,620

7.5cmHeight:1.5cm down from neck lineBack neck print 4.7cmWidth:

Pantone 1 - Please use Pantone #5517CPlease see detailed sketched forbreakcdown

Solid line, flat print pure silverpure silver10: RBK & WORDING - Pls see detailed sketchA1TUA1TU

Solid, flat print blackpantone20: Back ground print - Pls see detailed sketch095AXXXX


Artwork Sketches:

Season:

Date:

Page:

28.09.2007

0011

For size indication please refer to the artwork description in B.O.M.



600 Artwork:Logo 7422Part No.: 610 Artwork:7775 - 3 col printPart No.: 620 Artwork:7049 - Bk nk printPart No.:


IMX3222F08 MEN´S ZIP THRU SWEAT SET-IN SLEEVE HOODY

released:CAD Pattern:

Basic Pattern:

Wilton, Tony 24.09.2007 16:25:45 13.09.2007 17:36:04 23.07.2007 11:33:5124.05.2007

ARTICLE DESCRIPTION - LO TechPack …


International ProtoSizeSpec No.: 1

revised:

all msmts in cm

Season:

Date:

Page:

28.09.2007

0012

08 / 02

all main seams 1cm

Shrinkage (incl. in pattern) Length: Width:Pattern:

Size-Spec.:



Basic Pattern:

Wilton, Tony


24.09.2007 16:25:45 13.09.2007 17:36:04 23.07.2007 11:33:5124.05.2007




revised:

all msmts in cm

Season:

Date:

Page:

28.09.2007

0013

08 / 02

German Sizes

Sourcing Sizes



Basic Pattern:

Wilton, Tony


24.09.2007 16:25:45 13.09.2007 17:36:04 23.07.2007 11:33:5124.05.2007

ARTICLE DESCRIPTION - LO …



revised:

all msmts in cm

Season:

Date:

Page:

28.09.2007

0014

08 / 02

German Sizes

Sourcing Sizes





Basic Pattern:

Wilton, Tony 24.09.2007 16:25:45 13.09.2007 17:36:04 23.07.2007 11:33:5124.05.2007 revised:

SizeTabel No.: 1


Measurements Points Sample Size Newmsmt

Diff/1st

Newmsmt

Newmsmt

Diff/2nd

Diff/3rd

Diff/4th

Newmsmt

Season:

Date:

Page:

28.09.2007

0015

08 / 02

Diff/6th

Finalmsmt

Diff/5th

Newmsmt

German Sizes Toleran… 54 54

Sourcing Sizes +/- 54 54

UK Sizes L L

Chest width (meas. 2cm below armhole)A +2.0/ -1.0 +5.0 +2.0118,0 118,0

Hem openingB +2.0/ -1.0 +6.0 +3.0101,0 101,0

Shoulder lengthC +0.8/ -0.5 +0.516,5 16,5

sleeve length (with cuff)D +1.0/ -0.5 -1.071,5 71,5

Sleeve width (meas. 2cm below armhole)E +1.0/ -0.5 +2.048,6 48,6

Sleeve cuff widthF +1.0/ -0.5 22,0 22,0

Sleeve cuff height +/- 10% 6,0 6,0

Back neck widthG +1.0/ -0.5 +0.5 +2.016,8 16,8

Neck dropH +0.5/ -0.0 -0.4 +1.39,4 9,4

1/2 Hood length from (top edge of hood to c.f.)J: +0.5/ -0.0 -3.036,4 36,4

1/2 Hood length back (top of hood to c.b.)K +0.5/ -0.0 +3.0 +1.231,9 31,9

1/2 Hood WidthL: +0.5/ -0.0 25,6 25,6

Hood Width meas. point from c.b.M +0.5/ -0.0 19,4 19,4

Hood tie cord lengthO ----- +2.0120,0 120,0

Front zip lengthP 63.0----- -8.071,0 63.0

Pocket zip lengthQ ----- 18,0 18,0

Forearm width(21cm above hem edge;meas. on inseamR 41.0+1.0/ -0.5 +1.033,5 41.0

Back lengthZ +1.5/ -1.0 -0.5 +2.074,0 74,0

Hem Depth +/- 10% 6,0 6,0


"+"= too long/too wide"-"= too short/too tight"*"= unequal between left and right

Size Spec differs in above measurements !



Material Information

Season:

Date:

Page:

28.09.2007

0016

08 / 02

14885Ref.No.

95% CO/5% ELComposition:weftknittedTechnolgy:circular ribConstruction:1x1 circular rib

Finishing:

Coating:Grain:

Rib

350Weight: g/sqmThickness: mmHardness:

Rbk MGH # 28410, for adidas MGH use #21485Remark:

No.

SupplierSupp.Ref.

WidthYarn TypeDensityGauge

Yarn Count

Reference Fabric1

1x1 circular rib

0

16

Supplier Specific Data:

Part No.: 40

US Rainweartest

Stitch CountUS Customs

17204Ref.No.

100% COComposition:weftknittedTechnolgy:single jerseyConstruction:

fabric enzyme washed / silicon finishFinishing:

Coating:Grain:

160Weight: g/sqm0.6Thickness: mm

Hardness:Please use 30547 from SS09 onwards!!!!!! Upgraded Core Knits. For Asia MGH use #17205. For EU solid use #16377 For verticals 22324

Remark:

No.

SupplierSupp.Ref.


Yarn Count

Reference Fabric1

Top Star (China)TRD-240265

52 "

28

26/1


Part No.: 25 / 35

US Rainweartest





Material Information

Season:

Date:

Page:

28.09.2007

0017

08 / 02

20410Ref.No.

100% PESComposition:warpknittedTechnolgy:tricotConstruction:PES shiny ClimaLitebrushed back / hydrophilic finishFinishing:

Coating:Grain:

220Weight: g/sqm1.0Thickness: mm

Hardness:(TB SS07) (for EU use #29791) (for EU use #29791)Remark:

No.

SupplierSupp.Ref.


Yarn Count

Reference Fabric1

Fu Hsun (Taiwan)60124A-AH

60 "

0

75D/72F + 100D/36F


Part No.: 30

US Rainweartest


27856Ref.No.

100% COComposition:weftknittedTechnolgy:jacquardConstruction:Striped jacquard knit

Finishing:

Coating:Grain:

310Weight: g/sqmThickness: mmHardness:

Reebok EUR - Lifstyle as #22821 but at heavier weight 380gsm (Dropped 14/05/07 - back in 21.05.07)

Remark:

No.

SupplierSupp.Ref.


Yarn Count

Reference Fabric1

Far Eastern (Taiwan)7RDM032

70 "30/s cotton

14


Part No.: 10 / 20

US Rainweartest



Hangtags:



Season:

Date:

Page:

28.09.2007

0018

08 / 02

R0000002 RBKHT.02 (RBK HANGTAG COVER) Apply hangtag to zipper EMEA

R0000002 RBKHT.02 (RBK HANGTAG COVER) Apply hangtag to zipper NAM

R0000002 RBKHT.02 (RBK HANGTAG COVER) Apply hangtag to zipper ASPA

R0000002 RBKHT.02 (RBK HANGTAG COVER) Apply hangtag to zipper Japan

R0000002 RBKHT.02 (RBK HANGTAG COVER) Apply hangtag to zipper LAM

R0000002 RBKHT.02 (RBK HANGTAG COVER) Apply hangtag to zipper CDN


Lyster, Jane 30.05.2007released byAD release Confirmed by: Fong, Christine (SH) 31.05.2007

SINTEX INTERNATIONAL/CHINAfor Development Center:

DE

Season:

Date:

Page:

28.09.2007

0019



Mathieu - AD ReleasedAttention


Peppel, Edith van de 20.06.2007released byQuota Confirmed by: Zhou, Echo 2007.06.22


CU

Season:

Date:

Page:

28.09.2007

0020



Q (D) upd to: (RC):5Quota


Lyster, Jane 26.06.2007released byAD Amendment Confirmed by: Zhou, Echo (Shanghai) 2007.06.27


DE

Season:

Date:

Page:

28.09.2007

0021



Echo -Attention

Pt#25 - 17204 - Jersey lining has been added to body, hood & sleeves as main fabric is too lightMaterialweight.pt#480 - Amended measurements as discussed in meetingWorkmanship


Lyster, Jane 28.06.2007released byAdditional comment Confirmed by: Zhou, Echo (Shanghai) 2007.06.29


DE

Season:

Date:

Page:

28.09.2007

0022



EchoAttention

Artwork added & completeArtwork


Lyster, Jane 26.07.2007released by1st Prototype Confirmed by: Zhou, Echo (Shanghai) 27.07.2007


DE

Season:

Date:

Page:

28.09.2007

0023

08 / 02

CAD Pattern: Wilton, Tony



EchoAttention

LARGESizes

*Please see size table for differences and updatesSize Spec

*Chest +3.5, sleeve length -0.7, neck drop -0.5Sample Measurements

*Bring back to spec on future samples*Sample FIT OKSample Fitting

Measurements to be brought back to spec for future samples- Pt#25, Lining should be self colourMaterial- Rib part#40 should be self colour not contrast- Pt#40 has been amended so it is all the way around the hem. Please see updated sketch.- Pt#35 has been added in for piping to back yolk seam- Pt#10 is to be vertical on front & back body, sleeves & hood but is to be horizontal on back yolk.(Please see detailed sketch for stripe placement)- Pt#200, element 10, Zip tape should be self colourAccessory

- Pt#30 tricot piping to hood edge has been reduced to 0.8cm & should continue onto CF opening soWorkmanshipthere is no brake.- Please use a heavier thread for top stitching on whole garment. Please use 80 texs as per coatsthread thickness guide.- Pt#30 Tricot is to be used for back neck tape. Please apply on PFR sample- Stripe fabric pattern is to be improved at CB hood seam where it goes into neckline. We realisethat this will not be perfect but please try & make this symetrical as possible- Please remove hanger loop in back neck- Armhole seam has been amended so it is a true armhole & does not cut off at shoulder


Lyster, Jane 26.07.2007released by1st Prototype Confirmed by: Zhou, Echo (Shanghai) 27.07.2007


DE

Season:

Date:

Page:

28.09.2007

0024

08 / 02




- Back yolk has been added in so back raglan seam is now a yolk seam (please see sketch)- Piping & seam have been added into outer centre back: 3mm pt#35 jersey. Please see sketch & AD- Insert to sleeve has been amended to measure 13cm wide by 8cm deep- All artwork missing. Please submit seperatly for approval.Artwork- Positioing markers on sample are ok.Please note all amends on style & apply to PFR sample.Remarks

Please apply all PPR & Fit comments to PFR samples


Sweeney, Ed 31.07.2007released byQuota Confirmed by: Zhou, Echo (Shanghai) 01.08.2007


CU

Season:

Date:

Page:

28.09.2007

0025



Q (US) upd to: (RC):000Quota


Lyster, Jane 20.09.2007released byArtwork Comment Confirmed by: Zhou, Echo (Shanghai) 23.09.2007


DE

Season:

Date:

Page:

28.09.2007

0026



Logo 7049ArtworkMagnetCol 1 Pure silver approvedCol 2 Black approvedQuality & scale approved.Clever blueCol 1 pure silver approvedCol 2 pantone 652u - This is too pale. Please make darker & more grey as per pantone standardQuality & layout approvedPlease resubmit for print col 2

Logo 7775Rbk red is too orange, pleas make deeper in colour & less orange as per rbk red standardReplective pool approvedStucco approvedQuality & scale approvedPlease resubmit for rbk red print colour


Lyster, Jane 26.09.2007released byFinalisation Sample Confirmed by: Zhou, Echo (Shanghai) 27.09.2007


DE

Season:

Date:

Page:

28.09.2007

0027

08 / 02




Article #633317, colourway magnet reviewedArticle no´s

- size 54Sizes

- Please see updated spec for any ammendmentsSize Spec

- All measurements to be brought back to spec for SMS samples and Bulk.Sample Measurements

- This garment is FIT APPROVEDSample Fitting

- Please ensure that all rib parts are a good match to the approved lab dip for the main body colourMaterial- Back neck tape should be tricot & should also be self colour- Tricot to CF, hood edge & drawcord ends are to be a better colour match to ground colour- Piping to centre back yolk seam is to be rbk red. Please ensure that this is amended on furthersampling- Please ensure that all jersey parts are a good colour match to the approved main body lab dip- Zip puller 7454 is missing from CF opening. Please ensure that this is applied to further samplingAccessory- Pt#210, badge #7029, fill colour shoule be magnet & RBK lettering should be matallic thread.Please re-look at work sheets & resubmit- Tricot concealed CF is good, pls maintainWorkmanship- Pls ensure that hood seam is neat & does not waver at all- Pt#405 button holes need to be slightly bigger for drawcord to exit though neatly- Stitching on drawcord channel is puckering. Please ensure that this is improved- Please ensure that cuff is 6cm deep (sample is only 5.5cm)- Please ensure that shoulder seam is dropped by 4cm- Thread colour used is incorrect. Please ensure that the correct coats recommended thread colour isused & the same is used for the bar tacs- Please ensure that dart seams are as neat as possible- Drawcord ends are ok but please ensure that all loose threads are trimmed- Welt pockets must be improved. Not neat on sample


Lyster, Jane 26.09.2007released byFinalisation Sample Confirmed by: Zhou, Echo (Shanghai) 27.09.2007


DE

Season:

Date:

Page:

28.09.2007

0028

08 / 02




- Back neck print #7049 is approved as per strike off sent 6/9/07 Item#633342. - Incorrect coloursArtworkon PFR sample, but positioning is ok.- RBK Raised emb #7422 Approved as per strike off sent 26/7/07 Item#6480 But this is not confirmedas PVC free fill. This must use a PVC free fill. Please submit- Logo 7775 - Strike off sent 6/9/07 Commented that RBK red is too orange, pls make more red &deeper. Reflective pool app, stucco app. Quality & scale app. Please resubmit for RBK red print col.- Hang tag is missing. Please see Hang tag information on RMSHangtag

- Global back neck label should be in side seam, not back neckLabeling and Packaging- Size label should be in back neck, not side seam & this should be the global size label- Please ensure that the correct wash care info & fabric comp is applied onto wash care label inside seam

*Please see L&P on RMS for correct label information & ensure that this is correct for furthersampies*Please apply all fit & PFR comments to further samplesRemarks

- Fabric price seems highCosting Remark- Fabric usage is high. Is this becasue of the horizontal striped fabric at back yolk?


_AEML8181 20070928.pdf

Documents

Transcript of _AEML8181 20070928.pdf