S P E C I F I C AT I O N S

FA R - F I E L D S T E R E O R I B B O N M I C

A E A R 8 8 M K 2

S P E C I F I C AT I O N SOperating Principle: Directional Pattern: Frequency Range: Maximum SPL: Sensitivity: Output Impedance: Load Impedance:Phantom power: Polarity:

Off Axis ResponseHorizontal:

Vertical:

Transducer ElementMaterial:Thickness:Width:Length:

Microphone Dimensions:Height:Width:Depth:Weight:Shipping weight:Connector:

Pressure gradient transducerBidirectional< 20 Hz to 20 kHz165 dB SPL (1% third harmonic > 1 kHz)2.5 mV/Pa (-52 dBV) into unloaded circuit270 Ω broadband1.2 kΩ or greaterNot required or recommendedPin 2 and 4 high for positive pressure at the front of the microphone.

BidirectionalLevel changes with angle, frequency re-

sponse is consistent, -35dB null at 90º / 270º

Level changes with angle, reduced HF response above and below 0º / 180º, -25 dB null at 90º / 270º

Pure aluminum corrugated ribbon1.8 µm 0.185 in (4.7 mm)2.35 in (59.7 mm)

15 in (38.1 cm)3 in (7.62 cm)

2 lb 9.8 oz (1.19 kg)5 lb 3 oz (2.36 kg)XLR-5M, includes breakout cable - 2 XLR-3M

Accessories Included: Storage/shipping case, swivel adapter,custom protective mic sleeve, user manual

3.87

15.04

3.87

F R EQ U E N CY R ES P O N S E

A E A R I B B O N M I C S . C O M | @ R I B B O N M I C S | I N F O @ R I B B O N M I C S . C O M | ( 8 0 0 ) 7 9 8 - 9 1 2 7