Advantages of Roland DWX Digital Dental Prosthesis...
Transcript of Advantages of Roland DWX Digital Dental Prosthesis...
Table of Contents
p. 1 Why Digital
p. 5 Which DMX Mill is Best for My Lab?
p. 6 Return On Investment DWX-4
p. 7 Cost of Ownership DWX-4
p. 8 Return On Investment DWX-50
p. 9 Cost of Ownership DWX-50
p. 10 Customer Testimonials
TECHNOLOGY BRIEF
Advantages of Roland DWX Digital Dental Prosthesis Production
DWX-50 Dental Milling Machine
DWX-4 Dental Milling Machine
Why Digital?Today, digital dental technologies are helping to transform every aspect of the
dental industry. The days of tedious, manual production of crowns, copings and
bridges are fast disappearing. The latest technological advancements in scanning,
CAD/CAM software and CNC milling allow digital dental labs to deliver custom
production with speed and precision. Better fit and aesthetics promote patient
satisfaction, while labs enjoy enhanced productivity with faster turnaround time
and optimal accuracy and repeatability. In the end, going digital not only makes
labs more efficient, but also more profitable. In this document, we’ll cover the
benefits of digital dental milling, what you need to get started, the cost savings
of open architecture and return on investment.
Finally, we've included a profile of one dental lab
that has revolutionized its business with Roland
dental technology.
Benefits of Digital Dental Milling
Dental laboratories seeking to expand their businesses may
not be aware of the many benefits of using digital dental
technology to produce precision dental prosthetics. With the
introduction of Roland’s DWX dental milling machines, lab
technicians can mill dental substrates including wax, PMMA,
zirconia and nano ceramics, while selecting from a wide
range of software and tools. Even a small one-person lab can
bring digital technology in-house and reduce production
costs while expanding its business.
Unrivaled Ease-of-Use
Convenient and easy to use, DWX dental milling machines
are designed to streamline production and automate the
milling process from start to finish.
As Roland’s flagship dental mill, the
DWX-50 is packed with features,
including 5-axis simultaneous
machining capabilities and a
5-station automatic tool changer with
tool length sensor for automated
milling of complex prosthetics from
start to finish.
Engineered to meet the same high standards for precision
and performance, the more compact, 4-axis DWX-4 is
designed for on-demand milling of single crowns and
small bridges.
Both devices feature an intuitive Virtual Panel for easy
desktop operation, and a diagnostic notification system that
automatically sends e-mail alerts to the technician when jobs
are completed or production errors occur.
Cost Savings of Open Architecture
Unlike closed digital dental solutions, Roland’s DWX mills
enable dental laboratories to easily integrate the machine
within their existing production solution, or create a
customized solution by choosing from a wide range of
commercially available
3D scanners, ovens and
compatible CAD/CAM
software programs. In
addition, the DWX-4
comes with its own
CAM software. Open
architecture provides
dental laboratories
The DWX-50 is equipped to mill standard 98mm discs and block materials, including wax, PMMA, zirconia, hybrid ceramic, and composite resins.
3
TECHNOLOGY BRIEF
DWX DENTAL MILLING MACHINES
with the best choice in components, allowing for a tailored
solution and increased output at a lower cost. The DWX’s
open architecture supports virtually any dental CAD/CAM
software and a wide range of industry-standard puck, block
and pin materials, including zirconia, wax, PMMA, hybrid
ceramic and composite resin. As a result, you can choose
the right material for each application while helping control
production quality and costs.
Qualified for 3M ESPE’s Lava™ Ultimate Restorative and
VITA ENAMIC®
The Roland DWX 50 and 4 are qualified for use with 3M
ESPE’s Lava Ultimate Restorative and VITA ENAMIC
ceramic resin materials that offer patients excellent
esthetics, outstanding strength and long-term durability.
To earn the certifications with both 3M ESPE and VITA,
Roland worked closely and put both mills through rigorous
testing. Throughout this process, all hardware and software
components were benchmarked to ensure that they meet
3M and VITA's high quality standards at every turn.
Lava Ultimate Restorative and ENAMIC allow DWX labs
to create highly precise, durable crowns, inlays and onlays
without sintering. The materials can be milled, polished
and placed in the patient’s mouth in a fraction of the time
required for
other restoratives.
Virtual Machine Panel
Unlike traditional CNC mills, Roland has removed the
complex controls and implemented a user-friendly Virtual
Machine Panel (VPanel) which operates the DWX, including
machine
diagnostics and
calibration, from
your computer
desktop. The
VPanel also tracks
overall machine
running time for
maintenance
purposes.
With the DWX-4, you can mill a single crown or small bridge quickly and economically.
The DWX mills easily integrates with your existing solution.
Multicast Capable
Highly scalable, the DWX offers multicast capability
that allows laboratories to connect up to four machines
to one computer, making it easier than ever for dental
laboratories to expand their business and increase their
production capacity. DWX dental milling machines let dental
laboratories control the entire process in-house with a single
software seat, minimizing your investment in time and money.
Clean Cutting Area Improves Precision
For added convenience, the DWX is equipped with an
integrated air blower system that aids in milling difficult-
to-machine materials,
such as PMMA or
zirconia. The built-in dust
collection tray can also
be easily connected to
any lab vacuum system,
keeping the cutting area
clean and free of debris.
What You Need to Get Started
• 3D Scanner
• CAD/CAM Software
• DWX Milling Machine
• Sintering Oven (optional when using
Lava Ultimate Restorative)
5
TECHNOLOGY BRIEF
DWX DENTAL MILLING MACHINES
For high-volume labs, the DWX-50 streamlines the
production process with 5-axis simultaneous machining
capability and a 5-station automatic tool changer with tool
length sensor for automated milling from start to finish. The
compact, entry-level-priced DWX-4, on the otherhand, is
perfect for labs just getting started in digital dentistry, or for
larger labs needing an efficient method of handling small,
time-urgent jobs.
DWX FEATURES AND CAPABILITIES DWX-4 DWX-50
WAX Yes Yes
Zirconia Yes Yes
PMMA (Acrylic) Yes Yes
Approved for 3M LAVA Ultimate
& VITA ENAMICYes Yes
Material sizes supported 76 x 38 x 16-22mm block 98-100mm disk
Mandrel mounted material support Yes Yes (optional)
Number of working axis 4 5
Automatic tool changer (ATC) Yes Yes
Number of tools in ATC 2 or 4 (option) 5
Warranty 1 year parts and labor 2 years parts and labor
Motion controller Roland designed and built Roland designed and built
Spindle Roland Roland
Which DWX Mill is Best for My Lab?
Since the DWX allows you several different choices of materials to mill, you can select the optimum material for your
customers' need instead of being limited to proprietary materials. With tight tolerances and a high quality surface finish,
the DWX will ensure that your finished prosthetics are flawless. The following R.O.I. information is based on average costs
associated with creating several common prosthetics.
Visit www.rolanddga.com/solutions/dental to access our online ROI calculators.
The following examples are real world dental prosthetics that were milled on the DWX platform using multiple third party
CAM software. The average cost estimates included below were gathered from several independent dental laboratories:
Full Contour Crown Cost
Cost of Zirconia $7.42
Labor $0.90
Total Cost $8.32
Value $89.99
Margin $81.67
3 Unit Bridge Cost
Cost of Zirconia $26.00
Labor $0.90
Total Cost $26.90
Value* $299.99
Margin $273.09
DWX-4 Return on Investment
Note: Zirconia cost = Based on the average price per unit milled using a 16mm block of Zirconia priced on the average cost of $52/each. Labor cost is based on the average time it takes to set up a job for a single unit for mid-level lab technician paid $15/hr. *Value = Average price paid by customer.
7
TECHNOLOGY BRIEF
DWX DENTAL MILLING MACHINES
DWX-4 Cost of Ownership
The affordable pricing, open architecture, easy operation and reliable performance of the DWX-4 saves thousands in initial
outlay and operating costs, allowing laboratories to quickly recoup the initial investment.
Typical Annual Revenue Revenue Each Quantity Revenue
Full Contour Crowns $89.99 715 $64,342.85
3-Unit Bridges $299.99 180 $53,998.20
First Year Revenue Subtotal $118,341.05
Typical 1st year Milling Costs Cost Each Quantity Cost
Capital Expense (DWX-4) $17,995.00 1 $17,995.00
Warranty (1 year standard) $0.00 1 $0.00
Annual Maintenance Contract $0.00 1 $0.00
CAM Software Included 1 Included
BOFA Vacuum (optional) $1995.00 1 $1995.00
MATERIALS AND TOOLS
16mm HT Zirconia Blocks $52.00 127 $6,604.00
Diamond End Mills $170.00 9 $1,530.00
Labor (Mid-level tech) $15.00 $31,200.00
1st Year Expense Subtotal $59,324.00
1st Year Gross Profit $59,017.05
1st Year Return on Investment 199%
Note: The above analysis takes into account only milling expenses. Dental labs must also consider costs for scanners, CAD software, sintering and glazing ovens, etc.
Since the DWX allows you several different choices of materials to mill, you can select the optimum material for your
needs instead of being limited to proprietary materials. With tight tolerances and a high quality surface finish, the DWX
will ensure that your finished prosthetics are flawless. The following ROI information is based on average costs associated
with creating several different common prosthetics.
Visit www.rolanddga.com/solutions/dental to access our online ROI calculators.
The following examples are real world dental prosthetics that were milled on the DWX platform using multiple third party
CAM software. The average cost estimates included below were gathered from several independent dental laboratories:
DWX-50 Return on Investment
Full Contour Crown Cost
Cost of Zirconia $4.30
Labor $0.60
Total Cost $4.90
Value $79.99
Margin $75.09
3 Unit Bridge Cost
Cost of Zirconia $14.33
Labor $0.90
Total Cost $15.23
Value $299.99
Margin $284.76
Abutment Cost
Cost of Zirconia $4.30
Labor $0.60
Total Cost $4.90
Value $60.00
Margin $55.10
Note: Zirconia cost = Based on the average price per unit milled using a 14mm disc of Zirconia priced on the average cost of $140/each. Labor cost is based on the average time it takes to set up a job for a single unit for mid-level lab technician paid $15/hr. Value = Average price paid by customer.
Abutment photo courtesy of Custom Automated Prosthetics
9
TECHNOLOGY BRIEF
DWX DENTAL MILLING MACHINES
DWX-50 Cost of Ownership
The affordable pricing, open architecture, easy operation and reliable performance of the DWX-50 saves thousands in initial
outlay and operating costs, allowing laboratories to quickly recoup the initial investment.
Typical Annual Revenue Revenue Each Quantity Revenue
Full Contour Crowns $89.99 1430 $128,685.70
3-Unit Bridges $299.99 360 $107,996.40
First Year Revenue Subtotal $236,682,10
Typical 1st year Milling Costs Cost Each Quantity Cost
Capital Expense (DWX-50) $29,995.00 1 $29,995.00
Warranty (1 year standard / 2 year extended by DGA when registered)
$0.00 1 $0.00
Annual Maintenance Contract $0.00 1 $0.00
CAM Software $9,600.00 1 $9,600.00
BOFA Vacuum (optional) $1995.00 1 $1995.00
MATERIALS AND TOOLS
16mm HT Zirconia Blocks $140.00 110 $15,400.00
Diamond End Mills $170.00 18 $3,060.00
Labor (Mid-level tech) $15.00 2080 $31,200.00
1st Year Expense Subtotal $91,250.00
1st Year Gross Profit $145,432.10
1St Year Return on Investment 259%
Note: The above analysis takes into account only milling expenses. Dental labs must also consider costs for scanners, CAD software, sintering and glazing ovens, etc.
FOR COMPLETE PRODUCT SPECIFICATIONS AND FEATURES, OR MORE INFORMATION, CALL 800-542-2307 OR VISIT WWW.ROLANDDGA.COM/DWXROLAND DGA CORP. | 15363 BARRANCA PARKWAY | IRVINE, CALIFORNIA 92618-2216 | 800.542.2307 | 949.727.2100 | CERTIFIED ISO 9001:2008RDGA-DWXTECH-02 May 2014
Customer Testimonial
Founded in 1981, Roland DG is a leading worldwide manufacturer of precision digital devices, including best-selling wide format inkjets, milling and engraving machines, vinyl cutters, 3D scanners, and photo impact printers. Built on over 25 years of precision milling innovation, Roland milling machines combine superior performance with legendary Roland reliability. Tens of thousands of loyal Roland users in more than 150 countries rely on Roland’s unmatched customer service and support. As a company, Roland DGA has earned ISO 9001:2008 certification, which, in combination with parent company Roland DG’s ISO 9001:2008 and 14001 certifications, promotes consistent quality in manufacturing, distribution and customer service.
Each Roland machine is hand built in a state-of-the-art factory using an advanced cell-production system, called “Digital Yatai.” Using a 3D graphic manual displayed on a monitor that is connected to a rotating rack of parts, a single worker is able to quickly and accurately build a machine from start to finish. This innovative process has been studied by numerous manufacturers including Toyota.
Roland offers a two-year warranty for the DWX-50 and a one-year warranty for the DWX-4.
Roland DGA – A Worldwide Leader
Staying Ahead of the Curve with DWX Technology Precision Ceramics Dental Laboratory, Mark Jackson
Since 1981, Precision Ceramics Dental Laboratory in Montclair, California, has been providing quality dental product fabrication for clients nationwide, including dentists, surgeons, veterinarians, universities and teaching hospitals.
Precision Ceramics is a Dental Appliance Manufacturers Audit System (DAMAS)-certified laboratory with 45 people on staff, and is equipped with some of the most sophisticated technology available, including the Roland DWX-50 5-axis dental milling machine. “We’ve always tried to stay ahead of the curve on technology,” said Mark Jackson, co-owner and vice president of Precision Ceramics. “That’s one of the reasons we went with Roland.”
Precision Ceramics began to incorporate milling equipment into their laboratory’s production just over five years ago. “Historically, the nature of this business has been that everything is done by hand,” said Jackson. “The addition of CAD/CAM-based milling technology has greatly improved the accuracy and consistency of our case work.”
“There are a variety of milling machines designed for other purposes, but the DWX-50 is purpose-built for dental and suits our lab perfectly,” said Jackson. Designed to run quietly and cleanly, Roland’s dental milling machine has a small footprint and efficient work area. “Because the work area on the DWX is sized for dental applications, the machine doesn’t waste time recalibrating,” he added.
Jackson also values the low maintenance requirements of his Roland milling machines. “Of all the equipment in my lab, the Roland machines are the most trouble-free,” said Jackson. “They have never needed any repairs beyond daily calibration and cleaning; they just go and go and go.”
Although the weak economy has many dental patients electing to wait on non-essential dental work, Precision Ceramics has experienced 15 percent growth this year. Jackson attributes this growth to the production efficiencies his lab is able to achieve through use of CAD/CAM-based dental milling technology.
“These days, at least 30 percent of dental product production for
the United States market is being carried out overseas because of cheaper labor,” said Jackson. “With CAD/CAM milling technology, we can compete on price and deliver products faster than labs overseas can.”
Customer cases arrive at Precision Ceramics in two ways: Either as a rubber or silicone impression, from which the lab’s technicians manufacture a stone model that is scanned into the CAD/CAM program for design of a prosthetic part, or as an intra-oral scan that is imported directly into the CAD/CAM program.
CAD/CAM milling technology and the advent of intra-oral scanners has dramatically reduced turnaround times at Precision Ceramics from the industry standard of seven to 10 days. “We can provide our clients with one-day turnaround on intra-orally scanned cases,” said Jackson.
In addition, CAD/CAM milling technology enables extremely precise fabrication, resulting in a tighter seal of the prosthetic dental product to the prepared tooth. “With the dental milling technology, accuracy and consistency are greatly improved, which leads to a better experience for the patient,” said Jackson.
The design of the DWX-50 includes a spindle collet sized to match other industrial milling equipment, allowing for easy transfer of tools throughout the lab’s production environment. “The common spindle collet size means we can cycle our burrs through a variety of applications,” said Jackson. “It’s a nice feature that lets us maximize our efficiency.”
“The DWX-50 is specifically designed to fabricate dental products. It’s quiet, efficient and clean. It’s a real pleasure to work with!” said Jackson.