Advancing your best work

> Cuts faster*

Increased throughput with faster sanding and more parts per disc

> Lasts longer*

Lower costs with long disc life and fewer disc changes

> Delivers consistent finish Minimal rework due to

consistent finish quality

Film Disc 775L

* compared to conventional abrasives

Now available in grades 240+, 320+, 400+

Warranty and Limited Remedy: 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If a 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal or equitable theory asserted.

The Cubitron™ II Sanding Disc is a revolutionary advancement in abrasive technology featuring triangular-shaped ceramic minerals. As the triangular-shaped grain wears, it continually fractures to form sharp points that slice through the substrate, wear evenly and provide extra-long life and consistency.

3M Precision-Shaped Grain Conventional Grain

3M™ Cubitron™ II Hookit™ Film Discs 775L

Grade Part #Discs per box/case

5" x NH80+ 86818 50/250

120+ 86819 50/250

150+ 87026 50/250

180+ 64263 50/250

220+ 64269 50/250

240+ 47095 50/250

320+ 47080 50/250

400+ 05055 50/250

6" x NH80+ 86820 50/250

120+ 86821 50/250

150+ 87041 50/250

180+ 87040 50/250

220+ 87089 50/250

240+ 47096 50/250

320+ 47099 50/250

400+ 05056 50/250

3M™ Cubitron™ II Hookit™ Clean Sanding Film Discs 775L

Grade Part #Discs per box/case

5"80+ 86822 50/250

120+ 86823 50/250

150+ 64258 50/250

180+ 64264 50/250

220+ 64270 50/250

240+ 47097 50/250

320+ 47081 50/250

400+ 05058 50/250

6"80+ 86824 50/250

120+ 86825 50/250

150+ 64259 50/250

180+ 64265 50/250

220+ 64271 50/250

240+ 47098 50/250

320+ 47082 50/250

400+ 05059 50/250

775LFilm Discs 775L

denotes new grade

30

25

10

15

20

5

0

100%

229%

114%

Cuts faster!6 minute material removal t est

Am

ount

of m

ater

ial r

emov

ed (g

)

30

25

10

15

20

5

0

100%

600%

111%

Lasts longer!Disc life t est

Dis

c lif

e (m

in)

Conventional A/O 80 grit Competitive ceramic 80 grit 3M™ Cubitron™ II 775L 80+

600%

111%

Lasts Longer!Disc Life Test

3M™ Cubitron™ II Stikit™ Film Disc Rolls 775L

Grade Part #Discs per roll/case

5" x NH80+ 86810 100/4

120+ 86811 100/4

150+ 64276 100/4

180+ 64280 100/4

220+ 64284 100/4

240+ 47091 100/4

320+ 47084 100/4

400+ 05063 100/4

6" x NH80+ 86812 100/4

120+ 86813 100/4

150+ 87049 100/4

180+ 87048 100/4

220+ 87103 100/4

240+ 47092 100/4

320+ 47103 100/4

400+ 05065 100/4

3M Abrasive Systems Division3M Canada P.O. Box 5757 London, ON N6A 4T1 1-800-364-3577 3M.ca/OrbitalSanding

3M, 3M Science. Applied to Life., Cubitron, Hookit and Stikit are trademarks of 3M.

Used under license in Canada. © 2018, 3M. All rights reserved. 1712-10677 E BA-18-25252

To request a sample and for more information, visit 3M.ca/OrbitalSanding