ACS 300 User's Manual ACS 300 AC Drives for Speed Control of 1 ...
Advanced Control Systems (ACS)
-
Upload
derek-alexander -
Category
Documents
-
view
37 -
download
3
description
Transcript of Advanced Control Systems (ACS)
![Page 1: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/1.jpg)
Advanced Control Systems (ACS)
Dr. Imtiaz Hussainemail: [email protected]
URL :http://imtiazhussainkalwar.weebly.com/
Lecture-1Introduction to Subject
&Review of Basic Concepts of Classical control
![Page 2: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/2.jpg)
Course Outline• Review of basic concepts of classical control• State Space representation• Design of Compensators• Design of Proportional• Proportional plus Integral • Proportional Integral and Derivative (PID) controllers• Pole Placement Design• Design of Estimators• Linear Quadratic Gaussian (LQG) controllers • Linearization of non-linear systems• Design of non-linear systems• Analysis and Design of multivariable systems • Analysis and Design of Adaptive Control Systems
![Page 3: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/3.jpg)
Recommended Books
1. Burns R. “Advanced Control Engineering, Butterworth
Heinemann”, Latest edition.
2. Mutanmbara A.G.O.; Design and analysis of Control
Systems, Taylor and Francis, Latest Edition
3. Modern Control Engineering, (5th Edition)
By: Katsuhiko Ogata.
4. Control Systems Engineering, (6th Edition)
By: Norman S. Nise
![Page 4: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/4.jpg)
What is Control System?
• A system Controlling the operation of another system.
• A system that can regulate itself and another system.
• A control System is a device, or set of devices to manage, command, direct or regulate the behaviour of other device(s) or system(s).
![Page 5: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/5.jpg)
Types of Control System
• Natural Control System– Universe– Human Body
• Manmade Control System– Vehicles– Aeroplanes
![Page 6: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/6.jpg)
Types of Control System
• Manual Control Systems– Room Temperature regulation Via Electric Fan– Water Level Control
• Automatic Control System– Room Temperature regulation Via A.C– Human Body Temperature Control
![Page 7: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/7.jpg)
Open-Loop Control Systems utilize a controller or control actuator to obtain the desired response.
• Output has no effect on the control action.
• In other words output is neither measured nor fed back.
ControllerOutputInput
Process
Examples:- Washing Machine, Toaster, Electric Fan
Types of Control System Open-Loop Control Systems
![Page 8: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/8.jpg)
Open-Loop Control Systems
Types of Control System
• Since in open loop control systems reference input is not compared with measured output, for each reference input there is fixed operating condition.
• Therefore, the accuracy of the system depends on calibration.
• The performance of open loop system is severely affected by the presence of disturbances, or variation in operating/ environmental conditions.
![Page 9: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/9.jpg)
Closed-Loop Control Systems utilizes feedback to compare the actual output to the desired output response.
Examples:- Refrigerator, Iron
Types of Control System Closed-Loop Control Systems
ControllerOutputInput
ProcessComparator
Measurement
![Page 10: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/10.jpg)
Multivariable Control System
Types of Control System
ControllerOutputsTemp
ProcessComparator
Measurements
HumidityPressure
![Page 11: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/11.jpg)
Feedback Control System
Types of Control System
• A system that maintains a prescribed relationship between the output and some reference input by comparing them and using the difference (i.e. error) as a means of control is called a feedback control system.
• Feedback can be positive or negative.
Controller OutputInput Process
Feedback
-+ error
![Page 12: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/12.jpg)
Servo System
Types of Control System
• A Servo System (or servomechanism) is a feedback control system in which the output is some mechanical position, velocity or acceleration.
Antenna Positioning System Modular Servo System (MS150)
![Page 13: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/13.jpg)
Linear Vs Nonlinear Control System
Types of Control System
• A Control System in which output varies linearly with the input is called a linear control system.
53 )()( tuty
y(t)u(t) Process
12 )()( tuty
0 2 4 6 8 105
10
15
20
25
30
35y=3*u(t)+5
u(t)
y(t)
0 2 4 6 8 10-20
-15
-10
-5
0
5
y(t)
u(t)
y=-2*u(t)+1
![Page 14: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/14.jpg)
Linear Vs Nonlinear Control System
Types of Control System
• When the input and output has nonlinear relationship the system is said to be nonlinear.
0 0.02 0.04 0.06 0.080
0.1
0.2
0.3
0.4
Adhesion Characteristics of Road
Creep
Adh
esio
n C
oeff
icie
nt
![Page 15: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/15.jpg)
Linear Vs Nonlinear Control System
Types of Control System
• Linear control System Does not exist in practice.
• Linear control systems are idealized models fabricated by the analyst purely for the simplicity of analysis and design.
• When the magnitude of signals in a control system are limited to range in which system components exhibit linear characteristics the system is essentially linear.
0 0.02 0.04 0.06 0.080
0.1
0.2
0.3
0.4
Adhesion Characteristics of Road
Creep
Adh
esio
n C
oeff
icie
nt
![Page 16: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/16.jpg)
Linear Vs Nonlinear Control System
Types of Control System
• Temperature control of petroleum product in a distillation column.
Temperature
Valve Position
°C
% Open0% 100%
500°C
25%
![Page 17: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/17.jpg)
Time invariant vs Time variant
Types of Control System
• When the characteristics of the system do not depend upon time itself then the system is said to time invariant control system.
• Time varying control system is a system in which one or more parameters vary with time.
12 )()( tuty
ttuty 32 )()(
![Page 18: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/18.jpg)
Lumped parameter vs Distributed Parameter
Types of Control System
• Control system that can be described by ordinary differential equations are lumped-parameter control systems.
• Whereas the distributed parameter control systems are described by partial differential equations.
kxdt
dxC
dt
xdM
2
2
2
2
21dz
xg
dz
xf
dy
xf
![Page 19: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/19.jpg)
Continuous Data Vs Discrete Data System
Types of Control System
• In continuous data control system all system variables are function of a continuous time t.
• A discrete time control system involves one or more variables that are known only at discrete time intervals.
x(t)
t
X[n]
n
![Page 20: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/20.jpg)
Deterministic vs Stochastic Control System
Types of Control System
• A control System is deterministic if the response to input is predictable and repeatable.
• If not, the control system is a stochastic control system
y(t)
t
x(t)
t
z(t)
t
![Page 21: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/21.jpg)
Types of Control SystemAdaptive Control System
• The dynamic characteristics of most control systems are not constant for several reasons.
• The effect of small changes on the system parameters is attenuated in a feedback control system.
• An adaptive control system is required when the changes in the system parameters are significant.
![Page 22: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/22.jpg)
Types of Control SystemLearning Control System
• A control system that can learn from the environment it is operating is called a learning control system.
![Page 23: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/23.jpg)
Classification of Control SystemsControl Systems
Natural Man-made
Manual Automatic
Open-loop Closed-loop
Non-linear linear
Time variant Time invariant
Non-linear linear
Time variant Time invariant
![Page 24: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/24.jpg)
Examples of Control Systems
Water-level float regulator
![Page 25: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/25.jpg)
Examples of Control Systems
![Page 26: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/26.jpg)
Examples of Modern Control Systems
![Page 27: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/27.jpg)
Examples of Modern Control Systems
![Page 28: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/28.jpg)
Examples of Modern Control Systems
![Page 29: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/29.jpg)
29
Transfer Function• Transfer Function is the ratio of Laplace transform of the
output to the Laplace transform of the input. Assuming all initial conditions are zero.
• Where is the Laplace operator.
Plant y(t)u(t)
)()(
)()(
SYty
andSUtuIf
![Page 30: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/30.jpg)
30
Transfer Function• Then the transfer function G(S) of the plant is given
as
G(S) Y(S)U(S)
)()(
)(SU
SYSG
![Page 31: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/31.jpg)
31
Why Laplace Transform?• By use of Laplace transform we can convert many
common functions into algebraic function of complex variable s.
• For example
Or
• Where s is a complex variable (complex frequency) and is given as
22
s
tsin
ase at
1
js
![Page 32: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/32.jpg)
32
Laplace Transform of Derivatives• Not only common function can be converted into
simple algebraic expressions but calculus operations can also be converted into algebraic expressions.
• For example
)()()(
0xSsXdt
tdx
dt
dxxSXs
dt
txd )()()(
)( 002
2
2
![Page 33: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/33.jpg)
33
Laplace Transform of Derivatives• In general
• Where is the initial condition of the system.
)()()()(
00 11 nnnn
n
xxsSXsdt
txd
)(0x
![Page 34: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/34.jpg)
34
Example: RC Circuit
• If the capacitor is not already charged then y(0)=0.
• u is the input voltage applied at t=0
• y is the capacitor voltage
![Page 35: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/35.jpg)
35
Laplace Transform of Integrals
)()( SXs
dttx1
• The time domain integral becomes division by s in frequency domain.
![Page 36: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/36.jpg)
36
Calculation of the Transfer Function
dt
tdxB
dt
tdyC
dt
txdA
)()()(
2
2
• Consider the following ODE where y(t) is input of the system and x(t) is the output.
• or
• Taking the Laplace transform on either sides
)(')(')('' tBxtCytAx
)]()([)]()([)](')()([ 00002 xssXByssYCxsxsXsA
![Page 37: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/37.jpg)
37
Calculation of the Transfer Function
• Considering Initial conditions to zero in order to find the transfer function of the system
• Rearranging the above equation
)]()([)]()([)](')()([ 00002 xssXByssYCxsxsXsA
)()()( sBsXsCsYsXAs 2
)(])[(
)()()(
sCsYBsAssX
sCsYsBsXsXAs
2
2
BAs
C
BsAs
Cs
sY
sX
2)()(
![Page 38: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/38.jpg)
38
Example1. Find out the transfer function of the RC network shown in figure-1.
Assume that the capacitor is not initially charged.
Figure-1
)()(''')()()('' tytydttytutu 336
2. u(t) and y(t) are the input and output respectively of a system defined by following ODE. Determine the Transfer Function. Assume there is no any energy stored in the system.
![Page 39: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/39.jpg)
39
Transfer Function• In general
• Where x is the input of the system and y is the output of the system.
![Page 40: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/40.jpg)
40
Transfer Function
• When order of the denominator polynomial is greater than the numerator polynomial the transfer function is said to be ‘proper’.
• Otherwise ‘improper’
![Page 41: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/41.jpg)
41
Transfer Function
• Transfer function helps us to check
– The stability of the system
– Time domain and frequency domain characteristics of the
system
– Response of the system for any given input
![Page 42: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/42.jpg)
42
Stability of Control System• There are several meanings of stability, in general
there are two kinds of stability definitions in control system study.
– Absolute Stability
– Relative Stability
![Page 43: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/43.jpg)
43
Stability of Control System
• Roots of denominator polynomial of a transfer function are called ‘poles’.
• And the roots of numerator polynomials of a transfer function are called ‘zeros’.
![Page 44: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/44.jpg)
44
Stability of Control System
• Poles of the system are represented by ‘x’ and zeros of the system are represented by ‘o’.
• System order is always equal to number of poles of the transfer function.
• Following transfer function represents nth order plant.
![Page 45: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/45.jpg)
45
Stability of Control System• Poles is also defined as “it is the frequency at which
system becomes infinite”. Hence the name pole where field is infinite.
• And zero is the frequency at which system becomes 0.
![Page 46: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/46.jpg)
46
Stability of Control System• Poles is also defined as “it is the frequency at which
system becomes infinite”. • Like a magnetic pole or black hole.
![Page 47: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/47.jpg)
47
Relation b/w poles and zeros and frequency response of the system
• The relationship between poles and zeros and the frequency response of a system comes alive with this 3D pole-zero plot.
Single pole system
![Page 48: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/48.jpg)
48
Relation b/w poles and zeros and frequency response of the system
• 3D pole-zero plot– System has 1 ‘zero’ and 2 ‘poles’.
![Page 49: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/49.jpg)
49
Relation b/w poles and zeros and frequency response of the system
![Page 50: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/50.jpg)
50
Example• Consider the Transfer function calculated in previous
slides.
• The only pole of the system is
BAs
C
sY
sXsG
)()(
)(
0 BAs is polynomialr denominato the
A
Bs
![Page 51: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/51.jpg)
51
Examples• Consider the following transfer functions.
– Determine• Whether the transfer function is proper or improper• Poles of the system• zeros of the system• Order of the system
)()(
2
3
ss
ssG
))()(()(
321
sss
ssG
)(
)()(
10
32
2
ss
ssG
)()(
)(10
12
ss
sssG
i) ii)
iii) iv)
![Page 52: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/52.jpg)
52
Stability of Control Systems
• The poles and zeros of the system are plotted in s-plane to check the stability of the system.
s-plane
LHP RHP
j
js Recall
![Page 53: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/53.jpg)
53
Stability of Control Systems
• If all the poles of the system lie in left half plane the system is said to be Stable.
• If any of the poles lie in right half plane the system is said to be unstable.
• If pole(s) lie on imaginary axis the system is said to be marginally stable.
s-plane
LHP RHP
j
• Absolute stability does not depend on location of zeros of the transfer function
![Page 54: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/54.jpg)
54
Examples
-5 -4 -3 -2 -1 0 1 2 3 4 5-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
stable
![Page 55: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/55.jpg)
55
-5 -4 -3 -2 -1 0 1 2 3 4 5-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
Examples
stable
![Page 56: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/56.jpg)
56
-5 -4 -3 -2 -1 0 1 2 3 4 5-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
Examples
unstable
![Page 57: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/57.jpg)
57
-5 -4 -3 -2 -1 0 1 2 3 4 5-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
Examples
stable
![Page 58: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/58.jpg)
58
-5 -4 -3 -2 -1 0 1 2 3 4 5-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
Examples
Marginally stable
![Page 59: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/59.jpg)
59
-3 -2 -1 0 1 2 3-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
Examples
stable
![Page 60: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/60.jpg)
60
-2 -1.5 -1 -0.5 0 0.5 1 1.5 2-4
-3
-2
-1
0
1
2
3
4Pole-Zero Map
Real Axis
Imag
inar
y A
xis
Examples
Marginally stable
![Page 61: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/61.jpg)
61
-5 -4 -3 -2 -1 0 1 2 3 4 5-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
Examples
stable
-6 -4 -2 0 2 4-5
-4
-3
-2
-1
0
1
2
3
4
5Pole-Zero Map
Real Axis
Imag
inar
y A
xis
stable
• Relative Stability
![Page 62: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/62.jpg)
62
Stability of Control Systems• For example
• Then the only pole of the system lie at
1031
CandBABAs
CsG if ,,)(
3pole
s-plane
LHP RHP
j
X-3
![Page 63: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/63.jpg)
63
Examples• Consider the following transfer functions.
Determine whether the transfer function is proper or improper Calculate the Poles and zeros of the system Determine the order of the system Draw the pole-zero map Determine the Stability of the system
)()(
2
3
ss
ssG
))()(()(
321
sss
ssG
)(
)()(
10
32
2
ss
ssG
)()(
)(10
12
ss
sssG
i) ii)
iii) iv)
![Page 64: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/64.jpg)
64
Another definition of Stability
• The system is said to be stable if for any bounded input the output of the system is also bounded (BIBO).
• Thus the for any bounded input the output either remain constant or decrease with time.
u(t)
t
1
Unit Step Input
Plant
y(t)
t
Output
1
overshoot
![Page 65: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/65.jpg)
65
Another definition of Stability
• If for any bounded input the output is not bounded the system is said to be unstable.
u(t)
t
1
Unit Step Input
Plant
y(t)
t
Output
ate
![Page 66: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/66.jpg)
BIBO vs Transfer Function
• For example
3
1
)(
)()(1
ssU
sYsG
3
1
)(
)()(2
ssU
sYsG
-4 -2 0 2 4-4
-3
-2
-1
0
1
2
3
4Pole-Zero Map
Real Axis
Imag
inar
y A
xis
-4 -2 0 2 4-4
-3
-2
-1
0
1
2
3
4Pole-Zero Map
Real Axis
Imag
inar
y A
xis
stableunstable
![Page 67: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/67.jpg)
BIBO vs Transfer Function
• For example
3
1
)(
)()(1
ssU
sYsG
3
1
)(
)()(2
ssU
sYsG
)()(
3
1
)(
)()(
3
111
1
tuety
ssU
sYsG
t
)()(
3
1
)(
)()(
3
112
1
tuety
ssU
sYsG
t
![Page 68: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/68.jpg)
BIBO vs Transfer Function
• For example
)()( 3 tuety t )()( 3 tuety t
0 1 2 3 40
0.2
0.4
0.6
0.8
1exp(-3t)*u(t)
0 2 4 6 8 100
2
4
6
8
10
12x 10
12 exp(3t)*u(t)
![Page 69: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/69.jpg)
BIBO vs Transfer Function
• Whenever one or more than one poles are in RHP the solution of dynamic equations contains increasing exponential terms.
• Such as .• That makes the response of the system
unbounded and hence the overall response of the system is unstable.
te3
![Page 70: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/70.jpg)
70
Types of Systems
• Static System: If a system does not change with time, it is called a static system.
• Dynamic System: If a system changes with time, it is called a dynamic system.
![Page 71: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/71.jpg)
Dynamic Systems• A system is said to be dynamic if its current output may depend on
the past history as well as the present values of the input variables.
• Mathematically,
Time Input, ::
]),([)(
tu
tuty 0
Example: A moving mass
M
y
u
Model: Force=Mass x Acceleration
uyM
![Page 72: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/72.jpg)
72
Ways to Study a System
System
Experiment with a model of the System
Experiment with actual System
Physical Model Mathematical Model
Analytical Solution
Simulation
Frequency Domain Time Domain Hybrid Domain
![Page 73: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/73.jpg)
73
Model• A model is a simplified representation or
abstraction of reality.
• Reality is generally too complex to copy exactly.
• Much of the complexity is actually irrelevant in problem solving.
![Page 74: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/74.jpg)
74
Types of Models
Model
Physical Mathematical Computer
Static Dynamic Static DynamicStatic Dynamic
![Page 75: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/75.jpg)
What is Mathematical Model?
A set of mathematical equations (e.g., differential eqs.) that describes the input-output behavior of a system.
What is a model used for?
• Simulation
• Prediction/Forecasting
• Prognostics/Diagnostics
• Design/Performance Evaluation
• Control System Design
![Page 76: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/76.jpg)
76
Classification of Mathematical Models
• Linear vs. Non-linear
• Deterministic vs. Probabilistic (Stochastic)
• Static vs. Dynamic
• Discrete vs. Continuous
• White box, black box and gray box
![Page 77: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/77.jpg)
77
Black Box Model
• When only input and output are known.• Internal dynamics are either too complex or
unknown.
• Easy to Model
Input Output
![Page 78: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/78.jpg)
78
Black Box Model
• Consider the example of a heat radiating system.
![Page 79: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/79.jpg)
79
Black Box Model
• Consider the example of a heat radiating system.
Valve Position
Room Temperature
(oC)0 02 34 66 128 20
10 33
0 2 4 6 8 100
5
10
15
20
25
30
35
Valve Position
Tem
pera
ture
in D
egre
e C
elsi
us
Heat Raadiating System
Room Temperature
0 2 4 6 8 100
5
10
15
20
25
30
35
Valve Position (x)
Tem
pera
ture
in D
egre
e C
elsi
us (
y)
Heat Raadiating System
y = 0.31*x2 + 0.046*x + 0.64
Room Temperature
quadratic Fit
![Page 80: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/80.jpg)
80
Grey Box Model
• When input and output and some information about the internal dynamics of the system is known.
• Easier than white box Modelling.
u(t) y(t)
y[u(t), t]
![Page 81: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/81.jpg)
81
White Box Model
• When input and output and internal dynamics of the system is known.
• One should know have complete knowledge of the system to derive a white box model.
u(t) y(t)2
2
3dt
tyd
dt
tdu
dt
tdy )()()(
![Page 82: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/82.jpg)
Mathematical Modelling Basics
Mathematical model of a real world system is derived using a combination of physical laws and/or experimental means
• Physical laws are used to determine the model structure (linear or nonlinear) and order.
• The parameters of the model are often estimated and/or validated experimentally.
• Mathematical model of a dynamic system can often be expressed as a system of differential (difference in the case of discrete-time systems) equations
![Page 83: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/83.jpg)
Different Types of Lumped-Parameter Models
Input-output differential equation
State equations
Transfer function
Nonlinear
Linear
Linear Time Invariant
System Type Model Type
![Page 84: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/84.jpg)
84
Approach to dynamic systems
• Define the system and its components.
• Formulate the mathematical model and list the necessary assumptions.
• Write the differential equations describing the model.
• Solve the equations for the desired output variables.
• Examine the solutions and the assumptions.
• If necessary, reanalyze or redesign the system.
![Page 85: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/85.jpg)
85
Simulation
• Computer simulation is the discipline of designing a model of an actual or theoretical physical system, executing the model on a digital computer, and analyzing the execution output.
• Simulation embodies the principle of ``learning by doing'' --- to learn about the system we must first build a model of some sort and then operate the model.
![Page 86: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/86.jpg)
86
Advantages to Simulation Can be used to study existing systems without
disrupting the ongoing operations.
Proposed systems can be “tested” before committing resources.
Allows us to control time.
Allows us to gain insight into which variables are most important to system performance.
![Page 87: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/87.jpg)
87
Disadvantages to Simulation Model building is an art as well as a science. The
quality of the analysis depends on the quality of the model and the skill of the modeler.
Simulation results are sometimes hard to interpret.
Simulation analysis can be time consuming and expensive.
Should not be used when an analytical method would provide for quicker results.
![Page 88: Advanced Control Systems (ACS)](https://reader035.fdocuments.us/reader035/viewer/2022062221/56813323550346895d99fe08/html5/thumbnails/88.jpg)
END OF LECTURE-1
To download this lecture visithttp://imtiazhussainkalwar.weebly.com/