Advance Engineering Works Advance...
Transcript of Advance Engineering Works Advance...
Advance Engineering Works
Advance Engineering
(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Welcome into the “Advance Group of Company” We Provide a complete Solution in Formulation & Granulation Processingequipments along with Bulk Material Handling Systems without zero dusting & zero Manpower with fully Auto facility
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.
Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571E-mail : [email protected] / [email protected] / [email protected] / [email protected] / [email protected] : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : [email protected] / [email protected] / [email protected]
Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Our formulation & granalation Machinery’s, are Roll Compactor, Rotary TabletCompression Machine, Fluid Bed Dryer, Rapid Mixer Granulator, Mass Mixe,Octa / Double / V Shape Blander Machine, Multi-Mill, Vibro Shifter, OscillatingGranulator & many more. Even we have directly on one to one replacement
of change parts or spares.
Greeting from the “Advance Group of Company”........ We are based atAhmedabad Gujarat, India. We introduce to our self as an
“Advance Group of Company”the company with 4 years’ experience in Formulation & Granulation
Processing Machinery & Vacuum Powder Transfer System for material HandlingSystems. We are the one of fastest growing & exporting our Top Quality
Machinery’s. Our Company specializes in Quality Machinery with reasonablecost, as well as provides the complete validation
documentation according to WHO & USFDA Approved Term Conditions.
Advance Group of Company has provide a complete Formulation & GranulationProcessing Line in Pharmaceuticals WHO / USFDA approved plan. As well as
provider solution in API, Chemical, Organic, Fertilizer, Food Industries ProcessingEquipments along with material handling systems
There is a professional team of engineers and designers professionals workingwithin our company. For reference, we submit our complete range of Machinery
& Systems.
We are manufacturing the bulk material handaling systems with Advance - PTS thisis specially applicable for Pharmaceuticals, Fertilizer, Chemical Bulk Drugs Organic
& Food Industries with our Advance - PTS we handling the powder on completeclose conditions with Zero Manpower & Zero Dusting. Advance - PTS transfer thematerial 1 meter to 30 meter distance. Our this specialty will charging FBD, RMG,
All Blander, Rotary Tablet Press, Shifter, Multi - Mill Storage Tank, Reactor, SiloTank, IPC Bin, Jumbo Bag, Our Advance - PTS has transfer rate 20 kg. To
10000 kg. per hour.
Advance Group of Company’s Founder is “Dilip Singh” underguidelines will achieve all our Banch Mark quality focus taking under
C.E.O. (Chief Executive Officer) - Mr. Rahul Singh
Advance Group of Company’sValuable Client List Lubok Industries LLP
Osho Recyling (Export)Mohak Laboratories (Export)
MOHAK
Advance - Compactor for formulation Process
ModelModel Code
Output
Roller Size
Roller Material Used
Optional Roller
All Machine Contact Part material Used
Non-Contact Part material Used
Roller surface
Optional Roller Available
Roller Spedd (Step Pulley drive)
Feeder Screw Speed
Roller Motor
Feeder Screw Drive Motor
Gear Box Make
Gear Box Teeth-Gear Process
Overall Dimentions (in mm)
Machine Weight
AE - CRC - 150
50 to 200 Kg. / Hr.*
200 mm x 150 mm Width
1500 (W) X 1480 (L) X 2552 (H)
1500 kg. (Approx)
AE - CRC - 200100 to 250 Kg. / Hr.*
200 mm x 200 mm Width
1500 (W) X 1480 (L) X 2570 (H)
1600 kg. (Approx)
Advance - Compactor Commercial Scale Machine
SS-410 / O.H.N.S. / EN - 31, Hardening & Chrome Process (Applicable in Pharma)
Stainless Steel - 316.
Stainless Steel - 316.
Stainless Steel - 304 (Matt Finish)
Plain Type (Simple)
Corrugated / Knurling / Briquetted. (S.S. - 304 / S.S. - 410 / OHNS As per Requirement)
5 to 25 RPM
10 to 110 RPM
10.0 HP / 960 RPM / 3 Phase / 415 V / 50 Hz.
5.0 HP / 1440 RPM / 3 Phase / 415 V / 50 Hz.
In-House Production
Alloy Steel (EN-31 / E-8)
Advance - Compactor & Online Roll Compactor, Graduator with Vibro Shifter FacilityModelModel Code
Output
Roller Size
Roller Material Used
Roller Plating Type
Optional Roller
All Machine Contact Part material Used
Non-Contact Part material Used
Roller surface
Optional Roller Available
Roller Spedd (Step Pulley drive)
Optional Required Variable Speed
Feeder Screw Speed (Through AC VFD)
Roller Motor
Feeder Screw Drive Motor
Gear Box Make
Gear Box Teeth-Gear Process
Overall Dimentions (in mm)
Net Weight
Advance - Compactor Pilot Scale MachineAE - PRC - 50
25 to 50 Kg. / Hr.*
200 mm x 50 mm Width
1170 (W) X 1180 (L) X 2052 (H)
1100 kg. (Approx)
1175 (W) X 1180 (L) X 2052 (H)
1130 Kg. (Approx)
SS-410 / O.H.N.S. (Applicable in Pharma)
Electro Less Nickel Plating (E.I.N.P.)
Stainless Steel - 316.(220 Grit Mirror Finish)
Stainless Steel - 316.(220 Grit Mirror Finish)
Stainless Steel - 304.(240 Grit Matt Finish)
Corrugated Type (Specific)
Plain / Knurling / Briquetted. (S.S. - 316 / S.S. - 410 / OHNS As per Requirement)
5 to 25 RPM
Main Motor Spee Variation through AC - Variable Frequency Drive Unit (1 to 25 RPM)
10 to 110 RPM
AE - PRC - 75
25 to 80 Kg. / Hr.*
200 mm x 75 mm Width
AE - PRC - 100
25 to 100 Kg. / Hr.*
200 mm x 100 mm Width
5.0 HP / 960 RPM / 3 Ph. / 415 V / 50 Hz.
2.0 HP / 1440 RPM / 3 Ph. / 415 V / 50 Hz.
7.5 H.P./960/415
3.0 H.P./14LEIn-House Production
Alloy Steel (EN-31 / E-8)
Why the Compaction most important stage in Granulation Processing Section.Whenever, we make the dry formulation converted in to the Tablet,The formulation of product is must require the product Bulk Density is0.7 gm/cc Bulk Density. So in that time Advance - Compactor has touse increase the powder Bulk density between compactor’s Roller.Advance - Compactor mainly work is increasing the product bulkdensity, which is most important to make the Tablet or bulk drugs section.
“Advance Group of Company’s” also supplied the One To One Replacementof Roll Compactor machine change parts or Spares.
Briquetted Type RollersKnurling Rollers Roll Compactor Gear Box Change PartsCorrugated Type Rollers
Part No. QuantityRoll Compactor CRC - 150 / 200 Change Parts
AE-CRC-3520036
AE-CRC-3520037
AE-CRC-3520037
AE-CRC-3520038
AE-CRC-7710002
AE-CRC-7710003
AE-CRC-7710004
AE-CRC-3520061
AE-CRC-3520062
AE-CRC-7710005
AE-CRC-7710006
AE-CRC-7710008
AE-CRC-7710009
AE-CRC-7710010
AE-CRC-4520061
AE-CRC-4520061
AE-CRC-5520062
AE-CRC-5520063
AE-CRC-5520064
AE-CRC-5520065
Gear Box A Body (TOP - Bottom)
Gear Box B Body (TOP - Bottom)
End Cover Close - Gear Box A
End Cover 61 mm Hole. - Gear Box B
Drive Shaft For Gear Box - A
Mid Shaft For Gear Box - A
Drive Shaft For Gear Box - A
Drive Shaft For Gear Box - B
Mid Shaft For Gear Box - B
48 Teeth Gear
42 Teeth Gear
32 Teeth Gear
14 Teeth Gear
18 Teeth Gear
Roller Main Shaft For L.H.
Roller Main Shaft For R.H.
Check & Nut & Washer Roller Main Shaft For R.H.
Check & Nut & Washer Roller Main Shaft For R.H.
Scrapper for Roller for L.H. & R.H.
Teflon for Side Wall & Chamber
1 SET
1 SET
3 NO
3 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
2 NO
2 NO
2 NO
2 NO
2 NO
1 NO
1 NO
2 NO
2 NO
2 NO
QuantityAll Roll Compactor 50 / 75 / 100
Chage PartsPart No.
AE-PRC-2520036
AE-PRC-2520037
AE-PRC-2520038
AE-PRC-6710002
AE-PRC-6710003
AE-PRC-6710004
AE-PRC-2520061
AE-PRC-2520062
AE-PRC-6710005
AE-PRC-6710006
AE-PRC-6710007
AE-PRC-6710008
AE-PRC-6710009
AE-PRC-6710010
AE-PRC-6710050
AE-PRC-6710026
AE-PRC-6710027
AE-PRC-6710028
AE-PRC-6710029
Gear Box Body
End Cover Close
End Cover 61 mm Hole
Drive Shaft For Gear Box
Mid Shaft For Gear Box
Driven Shaft For Gear Box
32 Teeth Gear L H
32 Teeth Gear R H
65 Teeth Gear
68 Teeth Gear
57 Teeth Gear
25 Teeth Gear
17 Teeth Gear
28 Teeth Gear
Top Cover For Gear Box
Coupling Male - Female
Driven Pulley 245 X 325 mm At Gear Box
Driven Pulley 140 X 155 mm At Gear Box
Waser At Pully
1 SET
3 NO
3 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
1 NO
2 NO
1 NO
1 NO
1 NO
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : [email protected] / [email protected] / [email protected]
Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Advance Group of Company’sValuable Client List
Sintex Industries Limited Kunal Industries Pvt. Ltd.
Advance - Plug & Play Machinery
Multi-Mill Screen / Sieves Cone-Mill Screen / Sieves
Advance - Multi Mill
Advance - Lab Multi Mill
Advance - Tablet De-Dusting Machine
Tableting De-Dusting & DeburringMachine Vibro Type Elevating De-Dusting Tableting Machine
ModelAdvance Machine Model Code
Advance Machine Model Code
Contact Part
Non Contact Part
Capacity/Hour*
Minimum Diameter of Tablet
Minimum Diameter of Tablet
Electric Motor
Power Supply. (Client Scope)
Machine Dimension (Approx)
Machine Weight
0.25 H.P. / 1440 RPM / 415 Volt / 3 Phase / 50 Hz.
3 - Phase / 50 Hz. / 415 Volt. Cable Size : 1.5 MM / 4 Cores.
450 (L) x 450 (W) x 800 (H)
Approx 70 Kg.
AE-TDDB-Vibro
AE-TDDB-Vibro with Brushing Unit
Stainless Steel - 316
Stainless Steel - 304
Up to 2,00,000 Tablet / Hr.
5 mm
25 mm
Note : (If require 26 MM to 40 MM Tablet Diameter, then above Out-Put capacity will be fluction.)
ModelAdvance Machine Model Code
Advance Machine Model Code
Advance Machine Model Code
Advance Machine Model Code
Contact Part
Non Contact Part
Capacity/Hour*
Minimum Diameter of Tablet
Maximum Diameter of Tablet
Electric Motor
Power Supply. (Client Scope)
Note : (If require 18 MM to 25 MM Tablet Diameter, then above Out-put Capacity will be fluctuation)
AE-ETDD-6
AE-ETDD-9
AE-ETDD-12
AE-ETDD-15
Stainless Steel - 316
Stainless Steel - 304
Up to 2,50,000 Tablet / Hr.
5 mm
16 mm
0.25 H.P. / 1440 RPM / 415 Volt / 3 Phase / 50 Hz.3 - Phase / 50 Hz. /415 Volt. Cable Size : 15 MM / 4 Cores.
560 (L) X 450 (W) X 850 (H) (For 6 Tray)
560 (L) X 450 (W) X 1150 (H) (For 9 Tray)
560 (L) X 450 (W) X 1450 (H) (For 12 Tray)
560 (L) X 450 (W) X 1750 (H) (For 15 Tray)
ADVANCE - De - Dusting & De-Burring Machine
Machine Dimension (Approx)
Machine Weight Approx 90 kg. To 120 kg.
ADVANCE - De - Dusting & De-Burring Machine
Advance - Milling Machine
ModelOutput*
Contact Parts
Contact Parts
Rotor Assembly Diameter
Rotor Speed
5 to 50 Kg./Hr. 50 to 300 Kg./Hr.
Stainless Steel - 304
Stainless Steel - 304. (Optional - Mild Steel - Color Coated)
1.5 or 3.0 H.P. AC - VFD with POT Meter, START / STOP Push Button, Emergency Switch.
150 mm. Approx.
750 / 1500 / 2300 / 3000 RPM
250 mm. Approx.
750 / 1500 / 2300 / 3000 RPM
AE - LMM - 150 AE - LMM - 250
Screen dimention
Motor
Starter
Variable Speed (Optional)
Material Charging Height
Material Discharging Height
Inner Diameter 165 mm. / Height 90 mm
1.5 H.P. / 2880 RPM / 415 Volt / 3 - Phase
“DOL” with Reversible switch
1060 + 5 mm.
560 + 5 mm.
1460 + 5 mm.
760 + 5 mm.
Inner Diameter 265 mm. / Height 140 mm
3 H.P. / 2880 RPM / 415 Volt / 3 - Phase
“DOL” with Reversible switch
Beaters6 Nos. With knife and impact edges and 2
Nos. Scraper blades12 Nos. With knife and impact edges and 2
Nos. Scraper blades
Advance - Dust Extractor-500 / 700 CFM - HEPA Filtration
MachineModel Code
Contact Par
Non Contact Part
Filter Area
Filter
Capacity / Hour*
Suction Capacity
Electric Motor
Nozzle
Bass Arrangement
Filter Provision
(Optional)
Approx Weight
AE - DE - 150 AE - DE - 300 AE - DE - 500 AE - DE - 500
Stainless Steel - 316. (Mirror Finish)
Stainless Steel - 304. (Matt Finish)
4 No. Of Filter Bag. (Cotton)
2 No. Of Dust Nozzle. 4 No. Of Dust Nozzle.
Advance - Dust Extractor All Models
1.343 Sq. Mtr.
10 to 15 Liters
150 CFM
1.0 HP / 2880 RPM / 415 V
10 to 15 Liters
150 CFM
1.0 HP / 2880 RPM / 415 V
25 to 30 Liters
500 CFM
2.0 HP / 2880 RPM / 415 V
30 to 35 Liters
700 CFM
3.0 HP / 2880 RPM / 415 V
2.103 Sq. Mtr. 3.950 Sq. Mtr. 5.250 Sq. Mtr.
4 No. Of Castor wheels with Locking Facility.
0.3 Micro Hepa Filter in built in Dust Extractor Machine for Air Purifications.
Hepa Filter Size : 300 X 300 X 200 - 1 No. 5.0 Micron Pre Filter - 1 No. 10.0 Micron Fine Filter - 1 No. All M.O.C.-S.S.-30445 Kg. (Approx) 90 Kg. (Approx) 130 Kg. (Approx) 190 Kg. (Approx)
Advance - Dust Collector Machine
Advance - Dust Extractor-150 / 300 CFM
MachineModel Code
Screen Size
*Output
All Contact Parts
All Non Contact Parts
Stirrer Oscillation Assembly
Stirrer RPM
Charging Height
Discharging Height
Power Total (H.P.)
Gear Box
Base Arrangement
AE - OG - 200
510 X 250 mm Width.
25 to 40 Kg./Hr.
200 mm x 410 mm Ratchet
115 per minute.
550 mm (Variable according to application)
350 mm
2 H.P. / 1440 RPM / 415 V / 50 Hz.
3” / 10:1 Ratio
220 x 310 mm Long - 01 Nos.
215 per minute.
750 mm (Variable according to application)
550 mm
2 H.P. / 1440 RPM / 415 V / 50 Hz. (1 No.)
3” / 10:1 Ratio - 01 Nos.
220 x 310 mm Long - 02 Nos.
355 per minute.
1150 mm
750 mm
2 H.P. / 1440 RPM / 415 V / 50 Hz. (2 No.)
2” / 10:1 Ratio - (2 Nos.)
AE - SSG - 300
780 X 340 mm Width.
25 to 40 Kg./Hr. 3 to 100
Stainless Steel - 316.
Stainless Steel - 304.
4 No. Of Castor Wheel with locking facility
AE - DSG - 300
950 X 307 mm Width.
50 to 400 Kg./Hr.
Advance - Oscillating Granulator Machine Advance - Single Side Granulator Machine Advance - Double Side Granulator Machine
Advance - Granulator / Crushing Machine
To Define granules Size require Ribro Shifter Machine, Advance - Sieving / Screening Machine
Oscillating Granulator
Double Side Granulator Machine Granulator Screen / Sieves
Advance - Vibro Shifter Sieves - Screen with Silicon MouldedAdvance - Heavy Scale Vibro ShifterZ Type Screen Advance - Sieve Shaker Advance - Vacuum Rated Vibro Shifter
Machine cGMP ModelMODEL
Machine Contact Part
Machine Contact Non Part
Screens / Sleve Make
Screen Dia.
Capacity / Hour*
Top Lid
Charging Height
Disharging Height
Electric Motor
AE - LSS - 8
5 to 10 Kg.
Mini. 2 Deck. Maxi 7 Deck
Manually
0.25 H.P. / 1-Phase-230 Volt.
290 + 5 mm.
150 + 5 mm.
400 + 5 mm.
290 + 5 mm.
500 + 5 mm.
300 + 5 mm.
600 + 5 mm.
320 + 5 mm.
5 to 20 Kg./Hr. 5 to 25 Kg./Hr. 10 to 25 Kg./Hr. 10 to 100 Kg./Hr.
AE - VS - 12 AE - VS - 18 AE - VS - 22 AE - VS - 24
Stainless Steel - 316. (220 Gritt Mirror Finish)
Stainless Steel - 304. (220 Gritt Mirror Finish)
Stainless Steel - 316 with Silicon Molded Gasket / white Neoprene Rubber Gasket
Stainless Steel - 316 with Silicon Gasket White Neoprene Rubber Gasket
0.5 H.P. / 1440 RPM / 3 Phase / 415 Volt
Sleve Shekar - 8”
200 MM DIA 300 MM DIA 450 MM DIA 550 MM DIA 610 MM DIA
Vibro Shifter 12” Vibro Shifter 18” Vibro Shifter 22” Vibro Shifter 24” DescriptionModel CodeContact Part
Non Contact PartScreens
Screen Dia.
AE - VS - 30
Available in Wiremess or Perforated Screen. In Stainless Steel – 304 / Optional Stainless Steel – 316 / 316 LParticle size: 6 / 12 / 14 / 18 / 20 / 24 / 30 / 40 / 60 / 80 / 100 / 120 / 150 / 200 / 220 / 240 / 300 / 400 / 450 / 500 / 600 Mess.
AE - VS - 36 AE - VS - 48 AE - VS - 60 AE - VS - 72
Stainless Steel - 304 / (Optional) Stainless Steel - 316. (220 Grit Mirror Finish)
Mid Steel - M.S. (Powder Coated) / (Optional) Stainless Steel - 304. (220 Grit Matt Finish)
Advance - Vibro Shifter Machine / Advance - Vaccum Rated Vibro Shifter Machine
750 MM 910 MM 1220 MM 1524 MM 1828 MM
Mild Steel – M.S. (Powder Coated) / (Optional) Stainless Steel – 304. (220 Grit Matt Finish)
Screen GasketCapacity / Hour*
Screen Particle Size
Neoprene / Natural White Rubber Gasket / Silicon Food Graded Rubber Gasket.
Direct On Load (DOL) Starter Switch3 No. Of Castor Wheel with Locking Arrangement Anti Vibration Pad. 4 No.
Plug & Play Machine
40 to 300 Kg. / Hr.
900 + 5 mm without Lid
1220 + 5 mm with Lid
735 + 5 mm
1.0 HP / 1440 RPM / 3 Ph.
50 to 350 Kg. / Hr.
900 + 5 mm without Lid
1220 + 5 mm with Lid
735 + 5 mm
2.0 HP / 1440 RPM / 3 Ph.
80 to 500 Kg. / Hr.
1000 + 5 mm without Lid
1320 + 5 mm with Lid
750 + 5 mm
3.0 HP / 1440 RPM / 3 Ph.
100 to 800 Kg. / Hr.
1200 + 5 mm without Lid
1420 + 5 mm with Lid
700 + 5 mm
5.0 HP / 1440 RPM / 3 Ph.
200 to 1400 Kg. / Hr.
1250 + 5 mm without Lid
1450 + 5 mm with Lid
800 + 5 mm
7.5 HP / 1440 RPM / 3 Ph.
Disharging HeightElectric Motor
Operating SystemBase Arrangement
Utility Required.
Charging height
Single Side Granulator Machine
Advance - Plug & Play Machinery
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : [email protected] / [email protected] / [email protected]
Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Advance Group of Company’sValuable Client List
Salem Microbes Ltd.Sonekar Pharmacy CollegeDoshion Water Solution P. Ltd.Ion Exchange India Ltd.
Blender ShapeOctagonal Blander
Double Cone Blander
V-Blander
Gross Volume
Working Volume
Contact Parts
Non Contact Parts
Main Motor
Gear Box
RPM of Blender
Material Inlet
Internal Baffles
Discharge Valve Size & Type
Gasket
Control & Operating Panel
AE-OGB-100 Liters.
AE-DCB-100 Liters.
AE-VB-100 Liters.
100 Liters.
70 Liters. (60 Kg.)
AE-OGB-500 Liters.
AE-DCB-500 Liters.
AE-VB-500 Liters.
500 Liters.
400 Liters. (300 Kg.)
AE-OGB-1200 Liters.
AE-DCB-1200 Liters.
AE-VB-1200 Liters.
1200 Liters.
1000 Liters. (600 Kg.)
AE-OGB-1500 Liters.
AE-DCB-1500 Liters.
AE-VB-1500 Liters.
1500 Liters.
1200 Liters. (800 Kg.)
Advance - Octagonal / Double Cone / V - Shape Blender Machine
S.S.316 / 316 L (M.O.C.)
S.S.D04 / S.S.304 Cladding (M.O.C.)
3 H.P./1440 RPM / 415V/3-Phase
Size - 3”
5 H.P./1440 RPM / 415V/3-Phase
Size - 4”
7.5 H.P./1440 RPM / 415V/3-Phase
Size - 5”
(Optional) Automation
15 RPM (Fix) Optional Part : If require Variable Speed : 1 to 15 RPM through Variable Frequency Drive. (3-Phase - 415 V / 50 Hz.)
300 MM DIA of TOP Cover with Trl Clover Clamp. - Stainless Steel - 316 / 316 L.
Stainless Steel - 316. Shaft Mounted in Shell, welded 6 No. Of Baffles
250 MM Die meter Butterfly valve Manually Operated Hand Valve.
White Neoprene Rubber Food Graded Gasket. (Optional Part : White food Grade silicon Gasket at Extra Cost)
Manually Operated through Push Button. (Start / Stop & Emergency). DOL Starter Switch.
RPM Variable through AC - VFD. Programmable Logic Control Allen Bradley. HMI / MMI Make - KEP.
Railing Interlock / Limit Switch / Recipe Edit / Save / Pass Word Protection / Reveres - Forward etc.
Octagonal Blender Double Cone V Shape Blender
Advance - R & D Lab Scale Blender Advance - Pilot & Commerciel Blender
Dry Formulation / Food Product / Bulk Drugs Mixing with Blender
Blender ShapeOctagonal Blander
Double Cone Blander
V-Blander
Gross Volume
Working Volume
Contact Parts
Non Contact Parts
Main Motor
Gear Box
RPM of Blender
RPM Variable
Material Inlet
Internal Baffles
Discharge Valve Size & Type
AE-OGB-10 Liters.
AE-DCB-10 Liters.
AE-VB-10 Liters.
10 Liters.
7 Liters.
AE-OGB-20 Liters.
AE-DCB-20 Liters.
AE-VB-20 Liters.
25 Liters.
20 Liters.
AE-OGB-30 Liters.
AE-DCB-30 Liters.
AE-VB-30 Liters.
35 Liters.
30 Liters.
Advance - Blender Machine’s Model Name
S.S.316 / 316 L (M.O.C.)
S.S.D04 / S.S.304 Cladding (M.O.C.)
01. HP / 1440 RPM / 415V / 3 - Phase
Size - 3”
15 RPM (Fix)
1 to 15 RPM through Variable Frequency Drive. (3-Phase - 415 V / 50 Hz.)
150 MM DIA of TOP Cover with Trl Clover Clamp. - Stainless Steel - 316 / 316 L.
Not Provide in R & D Scale Model
200 MM Die meter Butterfly valve Manually Operated Hand Valve.
White Neoprene Rubber Food Graded Gasket.
(Optional Part : White food Grade silicon Gasket at Extra Cost)
Manually Operated through Push Button. (Start / Stop & Emergency). DOL Starter Switch.
(Optional) Automation
Gasket
Control & Operating Panel
RPM Variable through AC - VFD. Programmable Logic Control Allen Bradley. HMI / MMI Make - KEP.Railing Interlock / Limit Switch / Recipe Edit / Save / Pass Word Protection / Reveres - Forward etc.
Also available in capacity of 200/300/800/2000/2500 litersV Shape BlenderDouble Cone Octagonal Blender
Model
Rotor Speed
Blades
Output*
Screens
Electrical Motor
Dimensions
Case Dimensions
Net Weight
Gross Weight
1000 - 2250 - 4500 RPM
Fix Beaters (Stainless Steel With Knife And Impact Edge.)
25 - 300 Kg./Hr.
1. Round / Square Hole Perforated S. S. Sheet 2. Woven S. S. Wire Mesh
5.5 Kw / 7.5 Hp / 1440 Rpm / 3 Ph.
400 kgs.
530 kgs.
AE - CM - 300/Also available in lab scale
1230 X 760 X 1575 Mm. (Ht)
1380 X 1050 X 1900 Mm (Ht)
49 X 30 X 62 Inch. App.
55 X 42 X 75 Inch.
Advance - Comminuting Mill Machine
Communiting Mill Screen / Sieves
MODEL
Capacity
Contact Parts
Non Contact Parts
Gaskets
Main Motor
Tube for Seal
View Glass
Heater Arrangement
Finger Bag
Finger Bag Shaking
Control - Operation
Optional Operation
Pneumatic Parts
Compressed Air
5 kg. 10 kg. 20 kg. 60 kg. 200 kg.
Stainless Steel - 316. / 316.1 SA 270 Grit Mirror Finish
304 / Mild Steel claded with SS 304 SA 240 Grit Matt Finish
Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket
2.0 H.P. / 7.5 H.P. / 2880 RPM/3-Phase/415 Volt. 10.0 H.P. / 20 H.P. / 2880 RPM / 3-Phase / 415 Volt.1.0 H.P. / 2.0 H.P. / 2880RPM / 3-Phase / 415 Volt.
100 MM DIA Toughen Glass. 200 MM DIA Toughen Glass.
As per Model & Bowl Size. Use Inflatable Tube Silicon Gasket with PU connection. / White Neoprene Rubber Gasket Food Graded.
Steam Heater / Electric Heating in Both Operations.
3 Micron size of Finger Bag as per FBD Models. (Imported Cotton)
In All Models Finger Bag Up / Down through Pneumatic Cylinder, Shaking in Auto / Timer Based.
Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch, Emergency / Discharge / Limit Switch / Pneumatic.
Programmable Logic Controller / 1200: Allen Bradley. Hm1 / Mm1 Make : KEP. Speed variable, Interlock, Alarms, Recipe Edit / Save. Security etc.
All Pneumatic Cylinder & Solenold Valve make : Jenatics / Aira / Festo Make.
Minimum 4.5 Kg/cm Maximum 8.0 Kg./cm Continues Air Pressure required. (Client Scope)
AE - FBD - 5 Kg. AE - FBD - 10 Kg. AE - FBD - 20 Kg. AE - FBD - 60 Kg. AE - FBD - 200 Kg.
2 2
Machine
Gross Volume
Working Volume
All Contact Parts
All Non Contact Parts
Gaskets
Main Impeller Motor
Chopper Motor
Gear Box
Control & Operation
Optional Operation
Pneumatic Parts
Compressed Air
Power Required
10 Liters
7 Liters20 Liters
14 Liters
30 Liters
23 Liters50 Liters
42 Liters
50 Liters
42 Liters
50 Liters
42 Liters
1.0 H.P. / 2.0 H. P. Dual Speed
Size : 6”, Ratio : 10:1
3.0 KW / 415 Volts / 3 - Phase AC / 50 Hz. 5.0 KW / 415 Volts / 3 - Phase AC / 50 Hz. 7.0 KW / 415 Volts / 3 - Phase AC / 50 Hz.
Size : 7”, Ratio : 10:1 Size : 8”, Ratio : 10:1
2.0 H.P. / 3.0 H. P. Dual Speed 5.0 H.P. / 7.5 H. P. Dual Speed
2.0 H.P. / 3.0 H. P. Dual Speed0.5 2.0 H.P. / 1.0 H.P.Dual Speed
1 H.P. Dual Speed 1 H.P. Dual Speed
Stainless Steel - 316. / 316.1 SA 270 Grit Mirror Finish.
304 / Mild Steel cladded with SS 304. SA 270 Grit Mirror Finish.
Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket.
Manually Operated Control panel through Push Botton, Timer, Indicator & Selector Switch, Emergency / Discharge / Limit Switch / Pneumatic
Programmable Logic Controller / 1200: Allen Bradley, HMI / MMI Make : KEP, Speed variable, Interlock, Alarms, Recipe Edit / Save. Security etc.
All Pneumatic Cylinder & Solenold Valve make : Jenatics / Aira / Festo Make.
Minimum 4.5 Kg./cm Maximum 8.0 Kg./cm2 Continues Air Pressure required. (Client Scope)
AE - RMG - 10 Liters AE - RMG - 20 Liters AE - RMG - 30 Liters AE - RMG - 50 Liters AE - RMG - 100 Liters AE - RMG - 200 Liters
2
Machine Name
Model Code
Capacity
Over flow capacity
Working Capacity
All Contact Parts
All Non Contact Parts
Operating Panel
Speed of stirrer
Internal Finish & Baffles
Electric Motor (Warranty)
Main Motor Make (M.O.C.)
Gear Box Make (M.O.C.)
Standard Interlock
(Optional) Interlock
(Optional) Variable Speed
AE - MM - 25
20 Kgs.
30 Ltrs.
25 Ltrs.
AE - MM - 50
40 Kgs.
60 Ltrs.
50 Ltrs.
AE - MM - 100
100 Kgs.
200 Ltrs.
150 Ltrs.
AE - MM - 150
150 Kgs.
200 Ltrs.
160 Ltrs.
AE - MM - 200
200 Kgs.
250 Ltrs.
200 Ltrs.Stainless Steel - 304
Stainless Steel - 304 claded on M.S. Powder Coated
START / STOP DOL Starter
CG / BB / Kirlosker / Rotomotive
Premium / Elecon / Maruti / Robus.
Start & Stop. OLR with Starter.
Emergency Stop / Limit Switch.
30 RPM
1.0 H.P. / 1440 RPM / 415 Volt 2.0 H.P. / 1440 RPM / 415 Volt 3.0 H.P. / 1440 RPM / 415 V. 5.0 H.P. / 1440 RPM / 415 V. 7.5 H.P. / 1440 RPM / 415 V.
25 RPM 25 RPM
1 / 2 H.P. AC - VFD with POT Meter, Control Panel & Lamps. 3 / 5 / 7.5 H.P. AC - VFD with POT Meter, Control Panel & Lamps.
Mirror Finish, 6 no. Of Baffles for Proper Mixing
Mass Mixer - 25 Kg. Mass Mixer - 50 Kg. Mass Mixer - 100 Kg. Mass Mixer - 150 Kg. Mass Mixer - 200 Kg.
Advance Process Wet - Granulation Processing Equipments - Also mfg. In 300/500/900/1200 liters capacityWet formulation Product Mixing & Drying MachineryAdvance - Rapid Mixer Granultor (RMG)
Advance - Wet Granulation Zone
Standard Mode
Advance-Fluid Bed Dryer
GMP Model
Advance-Mass Mixer
GMP Model Standard Model
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : [email protected] / [email protected] / [email protected]
Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Advance Group of Company’sValuable Client List Polyplex Limited
Vigroa Medicare Ltd. Meghmani Orgenic Ltd.
ModelNo. Of Station
Type of Tooling
Output Tablets / Hour
Maximum Operating Pressure
Maximum Operating Pre-Comp. Pressure
Maximum Tablet Diameter
Maximum Depth of Fill
Upper Punch Penetration
Power
Overall Dimensions (In mm)
Net Weight
2 to 6 mm
2 H.P. / 3 - Phase / 1440 RPM / 50 Hz.
810 X 650 X 1190 H
380 Kg. 385 Kg. 400 Kg.
Applicable only for
Multi - Tooling
D / B / BB
Lab Press Machine
8
D
4800 To 14000
10
B
6000 To 18000
6 Ton
1 Ton19 mm
20.5 mm
16 mm
17.5 mmMaximum Tablet Diameter for “D” Tooling
Maximum Tablet Diameter for “B” Tooling
Maximum Tablet Diameter for “BB” Tooling
Maximum Depth of Fill “D” Tooling
Maximum Depth of Fill “B” Tooling
Maximum Depth of Fill “BB” Tooling
25.0 mm
16.0 mm
11.11 mm
20.5 mm
17.5 mm
17.5 mm
D” / B” / BB”
12 Stn.
2000 To 72000
AE - Mini Press - B - D AE - Lab Press - 10 -B AE - Multi - Tooling - 12 ModelTooling
No. Of Station
Hopper & Discharge Chute
Non Contact Parts
Operatif Force
Max.Tablet Diameter
Max. Depth of fill
Output Tab./Hour
Electric Motor
Overall Dimensions (in mm)
Net Weight
Bolus Machine.
12 Stn.
“D”
16 Stn.
“D”
20 Stn.
AE - Bolus - 12
12 to 14 Ton.
40 MM
30 MM
2000 TO 14000 Tablets/Hr.
5 H.P. / 960 RPM / 415 V.
980 X 1020 X 1820 (H)
1050 Kg.
10 Ton.
23 MM
20 MM
17,000 to 50,000 Tablet/Hr.
3 HP / 960 RPM / 415 V.
975 X 1050 X 1820 (H)
1050 Kg.
2 HP / 960 RPM / 415 V.
975 X 1050 X 1820 (H)
1100 Kg.
AE - SRTC - 16
Stainless Steel - 304. Some Parts E.I.N.P. & Nickel Chroming
Stainless Steel - 316.
AE - SRTC - 20
ModelNo. Of Station
Type of Tooling
Discharge Chute & Hopper
Turret & Die Plate
*Output Tablets /
Hr. Minimum Maximum
27
D
35
B
45
BB
AE - DRTC - 27 AE - DRTC - 35 AE - DRTC - 45
40000
125000
55000
155000
70000
210000
SG Iron 400 / 12. Chrome or (E.L.N.P.) Electro less Nickle Plating. (Optional SS-316)
Stainless Steel - 316. 220 Grit Mirror Finish
Max. Operating Pressure
Max.Tablet Diameter
Max. Depth of fill
Upper Punch Penetration
Main Electric Motor
Overall Dimensions (in cm)
Net Weight
Case Dimensions (in cm)
Gross Weight
10 Tones
23 MM
20 MM
16 MM
17.5 MM
11.11 MM
17.5 MM
3.70 K.W./5 H.P.109 x 109 x 182H
1100 kg.
109 x 109 x 182H1100 kg.
109 x 109 x 182H1200 kg.
1300 kg. 1350 kg. 1400 kg.
131x137x204 H
1.5 to 8 mm
6.5 Tons
Advance - Heavy Duty Tablet Compression MachineAdvance - Lab Press & Mini Press Tablet Compression Machine
Advance R & D Tablet Press
Advance - Rotary Tablet compression Machin change orSpare parts, Die & Puches, directly one to one replacement
Rotary Tablet Machine Change / Spare Parts
Advance - Double Side Rotary Tablet Compression Machine
Advance - Rotary Tablet Compression Machine
Model are,
AE - Mini Press - 8 - D
AE - Mini Press - 10 - B
AE - Multi Tooling - 12 - D / B / BB
AE - Bolus Machine - 12
AE - SRTC - 16 AE - SRTC - 20
AE - DRTC - 27 D. AE - DRTC - 35 B. AE - DRTC - 45 BB.
AE - HRTC - 45 BB. AE - HRTC - 51 BB. AE - HRTC - 61 BB.
AE - Lab - VCM(Vertical)
AE - Lab - HCM(Horizontal)
AE - VCM(Vertical)
AE - HCM(Horizontal)
Outpupt Capacity
Particle size reduction
Hopper Capacity
Optional Parts
All Contact Parts
All Non-Contact Parts
Operating System
Motor
Height
100 to 5000 Kg. / Shift
Approx : 5 to 10 Liters
1 H.P. / 2900 RPM / 3- Phase / 415 Volt
650 mm.
3 H.P. / 2900 RPM / 3- Phase / 415 Volt
950 mm.
5 to 15 Microns
Water Jacketing System
Stainless Steel - 316 (Mirror Finish)
Stainless Steel - 304 (Cladding or Guards)
Direct On Load Starter Switch
100 to 12000 Kg. / Shift
Approx : 20 to 30 Liters
Model Code
Technical SpecificationsAdvance - Colloid Mill Machine
For Coating on Tablet, Capsule, Chocolate have manufacturing Advance - Coating Pan Machine in GMP WHO / USFDA Model
Model CodeSize
Loading Capacity in liters
Machine’s Contact Part
Machine’s Non-Contact Part
Motor H.P.
Blower H.P.
Blower Arrangement
Heater Capacity in Kw.
Pan (Bowl)
RPM of Pan
Pan Mounting Angle
Optional (Spraying System)
Optioal (Speed Variable)
12”
20 Liters
18”
30 Liters
24”
45 Liters
30”
60 Liters
36”
75 Liters
42”
100 Liters
48”
150 Liters60”
210 Liters
Stainless Steel - 304 (Optional Part - Stainless Steel - 316 / 316L)
Mid Steel (M.S.) With Powder Coated (Optional Part - Stainless Steel - 304)
30
Spray Gun - S.S. 304 (Manually)
0
0.5 H.P. /1440 RPM / 415 Volt.
1.5 H.P. /1440 RPM / 415 V.
1.0 K.W. (Electric) 1.5 MM Thickness with 4 No. Of Baffles
10 to 60 (Direct couple with Gear Box & Motor)
2.0 MM Thickness with 5 No. Of Baffles
10 to 35 (Direct couple with Gear Box & Motor)
2.0 K.W. (Electric) 3.0 K.W. (Electric) 5.0 K.W. (Electric)
2.0 H.P. /1440 RPM / 415 Volt.
3.0 H.P. /1440 RPM / 415 V.
3.0 H.P. /1440 RPM / 415 V.
5.0 H.P. /1440 RPM / 415 V.
5.0 H.P. /1440 RPM / 415 V.
7.5 H.P. /1440 RPM / 415 V.Provide with Machine at extra cost. (Optional Part - Stainless Steel - 304)
AE - CP - 12 AE - CP - 18 AE - CP - 24 AE - CP - 30 AE - CP - 36 AE - CP - 42 AE - CP - 48 AE - CP - 60
0.5 H.P. / AC-VFD S.S. Panel Box,Pot Meter Standard Pus Buttons
2.0 H.P. / AC-VFD S.S. Panel Box,Pot Meter Standard Pus Buttons
3.0 H.P. / AC-VFD S.S. Panel Box,Pot Meter Standard Pus Buttons
5.0 H.P. / AC-VFD S.S. Panel Box,Pot Meter Standard Pus Buttons
Technical Specifications
Manually Spray Gun
R & D / Pilot Scale Coating PanAdvance - Coating Pan Machine
PAN - Bowl in S.S. - 304/ 316
Planetery Mixer
Dry Granulator for Crushing LumpsV - Blender - Dry Mixing
Coating Pan - Capsule or Tablet Coating
Advance - Horizontal Main Drive Unit
Advance - Ribbon Mixer
Advance - Pelletizer
Advance - Universal Gear - Fix
Advance - Multi Purpose R & D Lab Scale
Main Drive
Universal Gear
V-Shape Blender
Planetary Mixer
Pelletizer
Dry Granulator
Coating
Hom Orgenizer
Horizontal Mode
Mandatory
Dry Powder Mixing
Liquid Mixer
Mixing
Granules / Particle
Tablet Coating
Liquid Section
Attachment Purpose
Advance - Multi Purpose R & D Equipment
Homogeniser
Liquid Particle Define
Horizontal Model Vertical Model
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : [email protected] / [email protected] / [email protected]
Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Inbisco India Ltd.Gracure Pharma Ltd.
Verve Human Health Care Ltd.
Advance Group of Company’sValuable Client List
Applicable Industry for our Advance - PTSPharmaceuticals, API, Bulk Drugs, Minerals, Food, Salt, Organic, Resin, Polymer,
Fertilizer & Agriculture. Manufacturing in GMP, cGMP & Standard Model.
IPC Bin
IPC Bin
AdvanceBPD
AdvanceBPD
Drying
Milling
Milling Shifter Sieving / Screening
Blending Mixing
Storage Tank
Advance - PTS DustCollection Model
Dry Vacuum Pumpof Service Area
Advance - PTSDust Collection
(Occasionally) Application should be change as per clients' requirement. (Need to Product or Material in Powder Form, Material Bulk Density should be Minimum in 0.3 g/ml.)
Product Contact Parts : Stainless Steel 316 L / 316 (Optional)Product Non-Contact Parts : Stainless Steel 304 / Mild Steel (M.S.) Powder Coated.
Heavy Commercial Scale Model : Transfer Rate : 1500 To 2000kg./Hr. Heavy Commercial Scale Model : Transfer Rate : 2500 To 3500kg./Hr. Bulk material Heavy Scale Model : Transfer Rate : 4000 To 6000 Kg./Hr.High scale Transfer Loading Model : Transfer Rate : 7000 To 8000 kg./Hr.High scale Transfer Loading Model : Transfer Rate : 9000 To 10000 kg./Hr.
Lab Scale Model : Transfer Rate : 100 To 150kg./Hr.Pilot Scale Model : Transfer Rate : 200 To 300kg./Hr.Commercial Scale Model : Transfer Rate : 300 To 400kg./Hr. Commercial Scale Model : Transfer Rate : 500 To 800 Kg./ Hr. Heavy Commercial Scale Model : Transfer Rate : 600 To 1000kg./Hr.
Advance Powder Transfer System Bin / Drum / Storage tank Pick-Up through Bottom Pick-Up Device or Wand.Below is our some of application we charge through our “Advance Powder Transfer Systems”.
(A) Rotary Tablet Compression Charging System.(B) Roll Compactor Charging System.(C) Fluid Bed Dryer Unloading System.(D) Rapid Mixer Granulator Charging System.
(M) Liquid Charging System.(N) Bag Dump without Dusting Charging System.(O) Multi-Location Charging System.(P) & Many More.
(I) Sachet Jaar Filling System.(J) Jumbo Bag Loading Unloading System.(K) Storage Tank Charging System.(L) Reactor Tank Charging System.
(E) Blander Charging System.(F) Multi- Mill / Cone Mill Inline Charging System.(G) IPC Bin Loading Unloading System.(H) Vibro Shifter Charging System.
Anuradha College of Pharmacy
ModelOutput
All Contact Parts
Receiver Size
Receiver Strong Capacity
Construction of PTS
Receiver Fitting Arrangement
Receiver Size along with
Vacuum Intel Size
Material Intel Size
Main Motor
Vacuum Pump
Primary Filter
Primary Filter Fitting Arrangement
Butterfly Valve (Pneumatic Operated)
Secondary Filter in Vacuum Pump
1500 to 2000 Kg./Hr.
Contact Part Stainless Steel - 304 / 316
16” x 8” (In Inch)
At 1 Time Storage capacity - 20 Kg.
2500 to 3500 Kg./Hr.
Contact Part Stainless Steel - 304 / 316
16” x 10” (In Inch)
At 1 Time Storage capacity - 20 Kg.
2.0 Micron (Anti - Static material)Cage - Stainless Steel - 316
Pneumatic Actuator & Silicon Gasket3.0 Micron
SS - 304 / 316, Air Condenser with Pressure Regulator
Sequential Timer, Selector Switch & Main SwitchStandard Make
Purging System. Aira Make - 230 VMinimum 4.0 Kg. & Maximum 8 Kg. Continuosuly
3 - Phase / 415 Volt / 50 Hz.
2.0” Flexible Hose Pipe Food Graded 3.0” Flexible Hose Pipe Food Graded
AE - PTS - 16” x 8” Size AE - PTS - 16” x 10” Size
Filter Clean AssemblyHose Pipe
Control Panel (Operating Panel)Pneumatics Item (Solenoid Valve)
Solenoid ValveCompressed Air Require (Client Scope)
Power Supply (Client Scope)
AE - PTS Receiver - 3.00 MM Thick sheetS.S. - 304 / 316. Top Cover with Silicon Rubber Gasket
Total Size approx : 800 MM
2.0” (Inch) Outer Dia. With Tri Clover Clamp
2.0” (Inch) Outer Dia. With Tri Clover Clamp
7.5 H.P. / 10.0 Kw. / 2880 RPM / 3 - Phase / 415 V.
Safety Valve. Silencer, Suitable for 7.5 H.P. Motor
S.S. - 304 / 316. Top Cover with Silicon Rubber Gasket
Total Size approx : 900 MM
3.0” (Inch) Outer Dia. With Tri Clover Clamp
3.0” (Inch) Outer Dia. With Tri Clover Clamp
10.0 H.P. / 10.0 Kw. / 2880 RPM / 3 - Phase / 415 V.
Safety Valve. Silencer, Suitable for 10 H.P. Motor
ModelArea to be Used
Output
All Contact Parts
Receiver Size
Working Strategy
Construction of PTS
Receiver & Trolly Length
Vacuum Intel Size
Material Intel Size
Vacuum Pump with Motor
Primary Filter
Secondary Filter in Vacuum Pump
Filter Clean Assembly
Hose Pipe
Ground Floor
500 to 300 Kg./Hr.
Contact Part SS - 316
4” x 22” (Inch) SS - 316
Need to Vacuum Rated Equipments
AE - PTS Receiver - 3.0 MM Thick sheet
Total Size approx : 800 MM
2” (Inch) Outer Dia. With Tri Clover Clamp
2” (Inch) Outer Dia. With Tri Clover Clamp
7.5 H.P. / 2880 RPM / 3 - Phase / 415 Volt / 50 Hz.
3.0 Micron (Anti - Static material) Imported Coated
3.0 Micron
SS-316, Air Condenser with Pressure Regulator
2.5” Flexible Food Graded Anti-Static with Hose Clip.
S.S. - 304 with Timer & START / STOP, Main Switch
AE - PTS - 4” x 22” Size (Dust Collection Model)
Control Panel (Operating Panel)Pneumatics Item (Solenoid Valve)
Solenoid ValveCompressed Air Require (Client Scope)
Power Supply (Client Scope)
Standard Make
Purging System. Aira Make - 230 V
Minimum 4.0 Kg. & Maximum 8 Kg.
3 - Phase / 415 Volt / 50 Hz.
Vaccum Rated
Blender Machine
Advance
BPD
Vibro Shifter
Dryer
Advance Dust
Collection Model
Online Multi / Cone / Comm. - Millwith Blender Charging Facility
Dry Vaccum Pump
Octagonal Blender
FlexibleHose Pipe
Receiver
Material Inlet Wand
IPC Bin / FBD BowlInline Cone Mill
Flexible Hose Pipe
Online Vibro Shifter with Blender Charging Facility
Advance Dust
Collection Model
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : [email protected] / [email protected] / [email protected]
Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Advance Group of Company’sValuable Client List Bhagvati Herbals Care Pvt. Ltd.
BHCAmin a Healthcare Pvt. Ltd.
RANCHIS
Lubrikote Specialities Pvt. Ltd.
Advance PTS - Heavy Commercial / Powder Transfer Facility
Output
All Contact Parts
Receiver Size
Receiver Strong Capacity
Construction of PTS
Receiver Fitting Arrangement
Receiver Size
Vacuum Intel Size
Material Intel Size
Main Motor
Vacuum Pump
Primary Filter
Primary Filter Fitting Arrangement
Butterfly Valve (Pneumatic Operated)
Secondary Filter in Vacuum Pump 3.0 MicronSS - 304 Air Condenser with Pressure Regulator
3.0” Flexible Hose Pipe Food GradedSequential Timer, Selector Switch & Main SwitchMinimum 4.0 Kg. & Maximum 8 Kg. Continuosuly
3 - Phase / 415 Volt / 50 Hz.
Filter Clean AssemblyHose Pipe
Control Panel (Operating Panel)Compressed Air Require (Client Scope)
Power Supply (Client Scope)
AE - PTS Receiver - 3.00 MM Thick sheet
Top Cover & white Neoprene Rubber Gasket
3.0” (Inch) Outer Dia. With Tri Clover Clamp
3.0” (Inch) Outer Dia. With Tri Clover Clamp
15 H.P. / 20.0 Kw. / 2880 RPM / 3 - Phase / 415 V.
Safety Valve. Silencer, Suitable for 15 H.P. Motor
3.0 Micron (Anti - Static material)
Cage - Stainless Steel - 304
10” x 22” (In Inch)
At 1 Time Storage capacity - 50 Kg.
12” x 22” (In Inch)
At 1 Time Storage capacity - 80 Kg.
Contact Part Stainless Steel - 304 / 316
Total Size approx : 1000 MM Total Size approx : 1200 MM
10.0” DIA Pneumatic Actuator & Silicon Gasket 12.0” DIA Pneumatic Actuator & Silicon Gasket
Model AE - PTS - 10” x 22” Size AE - PTS - 12” x 22” Size
Transfer Rate : 3500 to 4000 Kg./Hr. 4000 to 6000 Kg./Hr. Output
All Contact Parts
Receiver Size
Receiver Strong Capacity
Construction of PTS
Receiver Fitting Arrangement
Receiver Size
Vacuum Intel Size
Material Intel Size
Main Motor
Vacuum Pump
Primary Filter
Primary Filter Fitting Arrangement
Butterfly Valve (Pneumatic Operated)
Secondary Filter in Vacuum Pump
7000 to 10000 Kg./Hr.
Contact Part Stainless Steel - 316 / 304
12” x 36” (In Inch)
At 1 Time Storage capacity - 110 Kg.
AE - PTS Receiver - 3.00 MM Thick sheet
Top Cover & Silicon Rubber Gasket
Total Size approx : 1300 MM
4.0” (Inch) Outer Dia. With Tri Clover Clamp
4.0” (Inch) Outer Dia. With Tri Clover Clamp
15 H.P. / 1440 RPM / 3 - Phase / 415 V.
Safety Valve. Silencer, Suitable for 20 H.P. Motor
2.0 Micron (Anti - Static material)
Cage - Stainless Steel - 304
12.0” DIA Pneumatic Actuator & Silicon Gasket
3.0 MicronFilter Clean Assembly
Hose PipeControl Panel (Operating Panel)
Compressed Air Require (Client Scope)Power Supply (Client Scope)
SS - 304 Air Condenser with Pressure Regulator4.0” Flexible Hose Pipe Food Graded
Sequential Timer, Selector Switch & Main SwitchMinimum 4.0 Kg. & Maximum 8 Kg. Continuosuly
3 - Phase / 415 Volt / 50 Hz.
Model AE - PTS - 12” x 36” Size
Advance PTS Double Hopper Tablet Compression Charging Facility
Advance - Double Side Granulator
Advance - Vibro Shifter
Advance - Compactor
Material Inlet
Advance - PTS - 10
Vacuum Inlet
Dry Vacuum Pump
Service Area
Advance - Bottom Pick up Device
Complete OnlineRoll Compactor Facility
ModelOutput
All Contact Parts
Receiver Size
Receiver Strong Capacity
Construction of PTS
Receiver Fitting Arrangement
Receiver Size along with
Vacuum Intel Size
Material Intel Size
Main Motor
Vacuum Pump
Primary Filter
Primary Filter Fitting Arrangement
Butterfly Valve (Pneumatic Operated)
Secondary Filter in Vacuum Pump
50 to 300 Kg./Hr.
Contact Part Stainless Steel - 316
8” (In Inch)
At 1 Time Storage capacity - 09 Kg.
AE - PTS Receiver - 2.5 MM Thick sheet
S.S.-316. Top Cover with Silicon Rubber Gasket
Total Size approx : 600 MM
1.5” (Inch) Outer Dia. With Tri Clover Clamp
1.5” (Inch) Outer Dia. With Tri Clover Clamp
3.0 H.P. / 5.0 Kw. / 2880 RPM / 3 - Phase / 415 V.
Safety Valve. Silencer, Suitable for 3.0 H.P. Motor
50 to 400 Kg./Hr.
Contact Part Stainless Steel - 316
10” (In Inch)
At 1 Time Storage capacity - 15 Kg.
AE - PTS Receiver - 2.5 MM Thick sheet
S.S.-316. Top Cover with Silicon Rubber Gasket
Total Size approx : 700 MM
1.5” (Inch) Outer Dia. With Tri Clover Clamp
1.5” (Inch) Outer Dia. With Tri Clover Clamp
5.0 H.P. / 7.5 Kw. / 2880 RPM / 3 - Phase / 415 V.
Safety Valve. Silencer, Suitable for 5.0 H.P. Motor
Pneumatic Actuator & Silicon Gasket3.0 Micron
SS-316, Air Condenser with Pressure Regulator
Pneumatic Actuator & Silicon Gasket3.0 Micron
SS-316, Air Condenser with Pressure Regulator
Sequential Timer, Selector Switch & Main Switch PLC Based HMI / MMI Operating Facility
2.0 Micron (Anti - Static material)
Cage - Stainless Steel - 316
Purging System. Aira Make - 230 V
Minimum 4.0 Kg. & Maximum 8 Kg. Continuosuly
3 - Phase / 415 Volt / 50 Hz.
1.5” Flexible Hose Pipe Food Graded
AE - PTS - 8 (Single Hopper & “Y” Chute) AE - PTS - 10 (Double Hopper System)
Filter Clean AssemblyHose Pipe
Control Panel (Operating Panel)Solenoid Valve
Compressed Air Require (Client Scope)Power Supply (Client Scope)
Service Area
Dry Vaccum Pump at
Advance BPDwith IPC Bin
Advance BPDwith IPC Bin
Advance PTS - 8
Double Side Rotary Tablet Compression machine
Double Hopper Charging facility
Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad –382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol – C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India.Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : [email protected] / [email protected] / [email protected]
Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems)
Advance Group of Company’sValuable Client List
Hovid (Export)Mylan Laboratories Ltd.
Alphamed Formulation
AlphamedMorepen Laboratories Ltd.
Machine Name
Model Code
All Contact Part
All Non-Contact Part
Thickness of Sheet
Main Material Inlet
Material Discharge
Main Motor
Impellor
Operating Control Panel
Base Arrangement
Other Parts
Overall Dimension
Approx weight
AE - BDS - 200 AE - BPD - 8 50/100/200/300/500/1000 Liters 50/70/100/250/500 Liters
2.0 MM Thcik
500 x 500 Rectangle Shape. With Guard
250 MM DIA Butterfly Valve with Manually Hand Operated Sandwich Type
3.0 H.P. / 2880 RPM / 3 - Phase / 415 Volt
Aluminium Casing 250 MM DIA, M. S. Casing
S.S. - 304 Panel Box with DOL Starter Switch
4 Nos. Of Legs with PU - Tubular Castor Wheels
Attach additional Bottom Pick - Up Device
900 L x 1100 W x 1400 H MM : Approx
Approx : 290 kg.
2.5 MM Thcik (Variable upon Requirement)
Dishcarge Facility : Ball Valve of Hand Operated Butterfly Valve
Base Arrangement : 4 No. Of Leg. / Castor wheel with Locking facility
Motor : 1 to 5 H.P. / 2880 RPM
Shaft : Stirrer with Baffles
Drain : Gravity Force
Half Openable Top Cover
Note : Suitable or modify
as per machinery’s Hopper
or inlet Provision
2.5 MM Thcik
250 MM DIA. Club with Bin & BDM
2.0” OD S.S. - 304 Pipe with T.C. Clamp
3 Micron Cartridge Filter & Ball Valve
400 L x 400 W x 2500 H MM : Approx
Approx : 5 kg.
Note :
Design with application shallbe change as per requirement
Not Applicable
Advance - Bag Dump Station Advance - Bottom Pick - Up Device Advance - IPC BinCode : AE - IPC - Bin
Advance - IPC BinCode : AE - IPC - Bin
Stainless Steel - 304 (Optional Part in Stainless Steel - 316)
Stainless Steel - 304
(Finishing : 220 Grit Mirror Finish)
(Finishing : 220 Grit Mirror Finish)
Advance - Bag Dump Station Advance - Bottom Pick - Up DeviceAdvance - IPC Bin & Solution Preparation Tank
Advance - Bag Dump Station with Online Shifter charging Facilitycharging Facility with Zero Manpower
Advance - Online Bag Dump Station, with Shifter Screening & Storage Tank
Advance Dust Collection
Dry Vaccum Pumpat Service Area
Vaccum PumpRated Vibro Shifter
Storage Tank
IPC Bin
Advance - Wet & Dry Granulation Processing flow chart with Advance Powder Transfer System
Big Charging PTS Syster
Granulator / Multi-Mill / Sifter / Screening Fludization / Dring Process / Fluid Bed Dryer
Tablet Coating Pan Machine Rotary Tablet Compression Machine Blending Mixer Dry Mixing. Granulator / Multi-Mill / Sifter / Screening
Dry Granulation Processing with Advance - Powder Transfer Facility
Wet Mixing Process / Rapid Mixer Granulator Advance - Roll Compactor
Advance - Compactor Machine
Dry Granules