Advance Automation & Electronics Drives, Motor Control ... We have latest hardware training kits...
Transcript of Advance Automation & Electronics Drives, Motor Control ... We have latest hardware training kits...
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
Advance Automation & Electronics (AAE)
Advance Automation & Electronics (AAE) is an Industrial Control Automation company and one of the leading Training providers in PLCs,
AC/VFD Drives, Motor Control Centers, SCADA/HMI Panels and Engineering Softwares. We also provide services for Industrial Automation
projects to various industries.
Today's world revolves around high technology & most companies have invested substantially in Automated Plants. Most manufacturing
companies are looking for competent engineers with basic aptitude towards automation and ability to work on various brands of PLCs, Drives,
SCADA and HMI Panels. Our PLC Training cover the Programming fundamentals and Professional Programming techniques as used in
Industries. We impart high level of technical skills to fresh engineers and professionals since 2010. Our Center holds regular batches for university
students and professionals every month. In Last four Years we have trained more than 2000 students and Professionals in PLC, SCADA, LabVIEW,
Visual Studio, ACAD-E and AC-VFD Drives. Our training comprises of 50% theory and 50% practical on professional training Kits along with
animations to explain students very easily the Core topics.
We have latest hardware training kits including Siemens S7-300/400 Series, S7-1200 Series S7-200 and S7-LOGO, OMRON/ Mitsubishi/ Fatek
PLCs and its analog Modules, AC/VFD Drives and Servo and Stepper Motors & Drives. We are the first to offer Wonderware InTouch by
Schneider and WinCC by Siemens, NI LabVIEW and HMI Panels Designing.
We also offer comprehensive training Courses of ACAD Electrical using JIC and IEC Standards libraries
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
Resource Persons:
Engr. Faheem Khan
M.S. Engg-Mechatronics & Control Engineering –UET-Lahore
Mr. Faheem is a Mechatronics & Control Engineer with 12 years of
vast experience in the Design & Development of Industrial
Automation & Control Systems. His areas of expertise include PLC’s,
VFD/AC/DC drives, Servo/Stepper motor & Drives, Process
Automation, encoder, SCADA & HMI Panels, OPC SERVERS, NI-
LABVIEW-all Modules, ACAD- Electrical, SCADA Networking-
Fiber Optic/Profibus/MPI/Modbus etc. He has developed many types
of Industrial Automation Projects using PLCs, SCADA and HMI
Panels Systems. His technical specialties include Real-time
hardware/software development, network programming and system
integration.
Engr. Sajid Khan
M.S. Engg-Mechatronics & Control Engineering–UET-Lahore
He has 12 years of diverse experience in Industrial Automation Using
PLCs, SCADA & DCS Control Systems. His areas of expertise
include electrical engineering, electronics, PLC automation, relay
automation, VFD inverters, servo drive, DC drive, stepper motor,
process automation, encoder, PLC SCADA & HMI Panels, PLC
communication, design PLC and relay control panels etc. He has
installed many types of machineries and process plants for industries
like textile, plastic food, chemical, pharmaceutical, packaging, power
generation, cement, etc.
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
PLC Training Kits
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
SCADA APPLICATIONS DEVELOPED
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
Brief Description
Be able to recognize S7 hardware and be able to replace
modules when a fault occurs.
Be able to design optimum S7 hardware selection for a
specific project
Be able to develop programming in Ladder for S7 products.
Be able to design, Develop and trouble shoot S7 hardware’s
including Logo, 200, 1200, 1500 and 300/400 series PLCs
Be able to acquire data from voltage sensor, Current Sensor
and temp PT100
Be able to operate the Step 7 software to make it perform
certain tasks.
Understand basic S7 instruction set and be able to make minor
modifications to software.
Course Documentation
Training Log
Pre Course Exercises
Course Exercises
Post Course Exercises
Post Course open Book test
Software installation and Setup
Course Equipment
S7 300 or 400 PLC and Analog Module
S7 200 highest specs PLC 226 and analog Module
S7 1200 or 1500 PLC
S7- LOGO and analog module plus Temp PT100 Module
Laptop by delegate
All PLCs Simulators
Module-1
Introduction to PLCs
a. Brand of PLCs
b. Types of PLCs
c. PLC Architecture
Components of PLC based control System
CPU and its Power Supply
Memory Locations
I/O Area of PLC & I/O Cards
I/O Modules
Scan Time of PLC
Factors Influencing Scan Time
Siemens PLC Types and Description
a. S5 - step 5
b. Logo PLC
c. S7-200
d. S7-300 & S7-400
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
e. S7-1200 & S7-1500
Logo PLC
a. Hardware
b. Programming
c. Wiring
d. Application
Exercise:
Practice on a practical model 12/24 RC Logo
with analog modules and Temp Module for
PT100
S7-200
a. Hardware
b. Programming
c. Wiring
d. Application
Exercise:
Practice on a practical model S7-200-cpu-
226 with analog modules
S7-300
a. Hardware
CPU, Power Supply, DI Modules, DO Modules,
DI/DO modules, AI Modules, AO Modules, AI/AO
Modules, Communication Modules, Function Modules
and all other modules.
b. Model no & Order no
c. Simatic Manager/TIA portal software.
All Description of software
How to create a Project
Configure Hardware
Write Program
Simulate the program
d. Programming & Simulation Practice Contacts and coils
Timers
Counters
Comparator operations
Math Functions
Move operations
Conversion Operations
Program control operations
Word logic Operations
Shift and Rotate
Functions
Functions Blocks
e. Communication Of S7-300 with PC
f. Practice on trainer S7-300
g. Configure Multiple Racks for large system
h. Configure RTU (remote terminal unit) for remote input &
output connected to CPU through Profibus.
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
i. How to design a Control system based S7-300.
j. How to assemble power Supply, CPU, and i/o cards.
k. Wiring
l. Trouble shooting
m. Revision
Exercise:
Practice on a practical model S7-300-cpu-313c 2DP with analog modules
S7-400
a. Hardware
Power Supply, CPU, DI Modules, DO Modules,
DI/DO modules, AI Modules, AO Modules, AI/AO
Modules, Communication Modules, Function Modules
and all other modules. b. Model no & Order
c. Simatic Manager/ TIA portal software.
All Description of software
How to create a Project
Configure Hardware
Write Program
Simulate the program
d. Programming & Simulation Practice
e. Communication Of S7-400 with PC
f. Configure Multiple Racks for large system
g. Configure RTU (remote terminal unit) for remote input &
output connected to CPU through Profibus.
h. How to design a Control system based S7-400.
i. How to assemble power Supply, CPU, and I/O cards.
j. Wiring
k. Trouble shooting
Exercises:
S7-1200
a. Hardware
CPU, DI Modules, DO Modules, DI/DO modules, AI
Modules, AO Modules, AI/AO Modules,
Communication Modules, -Signal Board (SB)
-Signal Module (SM)
b. Model no & Order no c. TIA (Totally Integrated Automation) Portal software. d. All Description of software
e. How to create a Project
f. Configure Hardware
g. Write Program
h. Simulate the program
i. Programming
j. Simulation tracks
k. Communication Of S7-1200 with PC
l. How to design a Control system based S7-1200.
m. How to assemble power Supply, CPU, and i/o cards.
n. Wiring
o. Trouble shooting
*How to use S7-1200 as RTU with S7-300
Exercises:
Practice on a practical model CPU 1200
Advance Automation & Electronics www.advsolusion.net
_______________________________________________________________________________________________________________________________ Head office: Plot # 782, I-10/4, Islamabad, Cell# 03339172465, [email protected]
S7-1500
a. Hardware
CPU, DI Modules, DO Modules, DI/DO modules, AI
Modules, AO Modules, AI/AO Modules,
Communication Modules,
b. Model no & Order no
c. TIA (Totally Integrated Automation) Portal software.
d. All Description of software
e. How to create a Project
f. Configure Hardware
g. Write Program
h. Simulate the program
i. Programming & Simulation
j. Communication Of S7-1500 with PC
k. How to design a Control system based S7-400.
l. How to assemble power Supply, CPU, and i/o cards.
m. Wiring
n. Trouble shooting
Exercises: More than 30 industrial based Problems and Solutions on Simatic Manager and TIA Portal