Adp6000ix User Manual

5/22/2018 Adp6000ix User Manual

1/13

ADP6000WH/ADP6000IX


2/13

This manual contains sections of Safe ty

Instructions,Operating Instructions,

Installation Instructions and Troubleshooting

Tips etc. Carefully reading it before using the

dishwasher will help you to use and maintain

the dishwasher properly.

To review the section on Troubleshooting T ips

will help you to solve some common problemsby yourse lf and not need to ask for the help of

professional technicians.

Contro l Panel . . . . . . . . . . . . . . . . . . . . . . . . 2

Dishwashe r Featu res . . . . . . . . . . . . . . . . . 2

Wash Cycl e Tabl e . . . . . . . . . . . . . . . . . . . . 3

Dete rgent . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Rins e Aid . . . . . . . . . . . . . . . . . . . . . . . . . 4,5

Loading the Dishwas her Rack . . . . . . . . 5,6

Specification of Display

Fi lter ing System . . . . . . . . . . . . . . . . . . . . . 7

Caring for the Dishwasher . . . . . . . . . . ,8

Turning On the Appli ance . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . 6

..7

About El ectri city conn ection . . . . . . . . . . 8

Water Connec tion . . . . . . . . . . . . . . . . . . . 9

Dimension s . . . . . . . . . . . . . . . . . . . . . . . . 9

Before cal ling for servi ce. . . . . . . . . . 10 ,11

. . . . . . . . . . . . . . . . . . 1

The manufacture r, following a policy of constant

development and up-dating of the product , may

make modifications without giving prior notice.


3/13

This appliance must be grounded. In the event

of a malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a

path of least resistance of electric current. This

appliance is equipped with a cord having an

equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate

outlet that is installed and grounded in accordance

with all local codes and ordinances.

Under certain conditio ns, Hydrogen gas may be produced in a hot-water syste m that has not been used for two

weeks or more. HYDROGEN GAS IS EXPLOSIVE.If the hot-water syst em has not been used for such a period,

before using the dishwasher turn on all hot-water faucets and let the water flow from each for several minutes.

This will release any accumulate d hydrogen gas. As the gas is flammable, do not smoke or use an open flame

during this time.

1

Keep children away from detergent and rinse aid, keepchild away from the open door of the dishwasher,there could still be some detergent left inside.

ren

Do not abuse, sit on, or stand on the door or dishrack of the dishwasher.

Do not touch the heating element during orimmediately after use.

Do not wash plastic items unless they are markeddishwasher safe or the equivalent. For plastic

items not so marked, check the manufacturer's recommendations.Use only detergent and rinse additives designedfor an automatic dishwasher. Never use soap,laundry detergent, or hand washing detergentin your dishwasher. Ke ep these products out ofthe reach of children.

During install ation, the power supply must notbe excessively or dangerously bent or flattened.

The door should not be left in the open positi onsince this could present a tripping hazards.

Do not tamper with controls.

Do not place any heavy objects of stand on the doorwhen it is open. The appliance could tip forward.When loading items to be washed:1) Locate sharp items so that they are not li kely to

damage the door seal;2) Load sharp knives with the handles up to reduce

the risk of cut-type injuries.3 Warning:Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

)

When using your dishwasher, you should pre ventplastic item from contacting with heating element.

If the supply cord is damaged, it must be replace dby the manufacturer or its servic e agent or asimilarl y qualified person in order to avoid ahazard.

Please dispose of packing materials properl y.

Use the dishwasher only for its intended function.

Remove the door to the washing compartment whenremoving an old dishwasher from service or discarding it.

The appliance is not inten ded for use by youngchildren or infirm persons without supervision.

Dishwasher detergents are strongly alkaline,theycan be extremely dangerous if swallowed.Avoidcontact with skin and eyes and keep children awayfrom the dishwasher when the door is open.

Young children should be supervised to ensure thatthey do not play with the appliance.

Check that the detergent receptable is empty aftercompletion of the wash cycle.

Other means for disconnection from the supply mustbe incorprated in the fixed wiring with at least 3mmcontact separation in all poles.

The appliance is to be connecte d to the water mainsusing new hose sets and that old hose-sets shou ldnot be reused.

The maximum number of place settings to be washedis 12.

The maximum permissible inlet wate r pressure is 1Mpa.

The minimum permissible inlet water press ure is 0.04Mpa.


4/13

To get the best performance from your dishwasher,read all operating instructions before using it for the

f irst time.

2

Upper Basket

Spray Arms

Lower Basket

Detergent Dispenser

Silverware BasketMain Filter

Cup Shelf

5

6

7

8

Rinse Aid Dispenser

Coarse Filter

Drain pipe connector

Inlet pipe connector

9

10

11

3

2

1 4

4678

1

2

49

6

7

8

Start / Pause button: Press this button to start or pause thedishwasher.

Delayed Start Button: P ress this button to set the dela yedhours for washing. You can delay the start of washing upto 12 hours. One press on this button delays the start ofwashing by half an hour.

Door Lock: Pull it to open the door.

5

5 3

21

11

1

2

3

4

5

6

7

8

9 10

9


5/13

3

1

2

3

4

5

6

7

Draw out the lower and upper baskets, load the dishwares and pushthem back. It is commended that loading the lower basket first, thenthe upper one. The expensive and finer chinaware should not be put in.

Turn on the water supply to full pressure

Press start/pause button to start a washing.

Turn off the appliance to cancel the current programme.(the current programme can be always cancelled by this way)

Press the start button to start washing.

The alarm will sound for 8 seconds.

According to the soil level to choose the desired program bypressing program selection button.

Then turn on the appliance and press the programme

button to select the desired programme.

Open the door of your dishwasher and swit ch yourdishwashe r off using the on/off key.

Wait a few minutes before unloading the dishwasher toavoid handling the dishes and utensi ls while they arestill hot and more susceptible to breakage.

Pre-washwash 45

Rinse 60.

For dishes that need to rinsedand dried only

5/22 g.

5/25 g.

22 g.

Pre-wash

Rinse 70.

Pre-washwash 50

Pre-wash

Rinse 70.

Pre-wash 50wash 60

15 g.

Pre-wash of dishes pots andpans while waiting for theload to be completed aft er thesubsequent meal.

For the heaviest soiled loads,such as pots,pans,casseroledishes and dishes that havebeen sitti ng with dried food on

them for a while.

For normally soiled loads,such as , plates,gl assesand lightly soile d pans.standard daily cycle.

pots

A shorter wash for lightlysoiled loads that do not needdrying.

For lightly soiled loads,suchas plates,glasses,bowls andlightly soiled pans.

(IEC-EN 50242)

WashRinse 7045

Pre-washwash 40

Rinse 70

Pre-wash


6/13

4

Dishwasher detergent is corrosive ! Take care to keep it outof reach of children.

To remove hard water spots, try the following: Run dishes throug h a normal wash program. Remove all metal dishware, such as cutle ry, pans, etc.,

from the dishwasher. Do not add detergent.

Pour two cups of vinega r into a bowl and set the bowl faceup on the lower rack of the dishwasher.

Run the dishes throug h a normal wash program.If this doesn 't work, try the same proc ess with 1 / 4 cup ofcitric acid crystals instead of vinegar.

Use only detergent specifically made for use in dishwashers.Keep your detergent fresh and dry. Don't put powder detergentinto the dispenser until You're ready to wash dishes.

The dispenser must be refill ed before the start of each wash cycle following the instruc tions provided in the" Wash CycleTable".Your dishwashers than conventional dishwashers. Generally, only one tablespoon ofdetergent is needed for a normal wash load. Also, more heavily soiled items need more detergent. Always add the detergen t justbefore starting dishwasher, otherwise it could get damp and will not dissolve properly.

use less detergent and rinse aid

To open the dispens er, turn the cap to the "open" (left)arrow and lift it out.Pour the rinse aid into the dispens er, being careful not to

overfill.Replac e the cap by inserting it aligned with "open" arrowand turning it to the closed (right) arrow.

A measured amount of rinse aid is released during the final rinse. As with detergent , the amountof rinse aid needed for your dishes depends on the hardness of the water in your area. Too muchrinse aid can result in lathe r of foaming and cause cloudiness or steaks on your dishes. If thewater in your area is very soft, you may not need rinse aid. If you do,you can dilute the rinse aidwith an equal amount of water.The rinse aid dispens er has four settings. Always start with the dispenser set on " 1 ". If spots andpoor drying are problems, increase the amount of rinse aid dispensed by removing the dispenserlid and rotating the dial to "2". If the dishes still are not drying properly or are spotte d, adjust the

dial to the next higher number until you r dishes are spot-fr ee. We sugges t you to set on "3" .

The rinse aid is releas ed during the final rinse to prevent waterfrom forming drople ts on your dishe s that can leave spots andstreaks. It also improves drying by allowing water to "sheet" offthe dishes.

Your dishwash ers are designed to use liquid rinse aids. Therinse aid dispenser is located inside the door next to thedeterg ent dispenser . To fill the dispenser, open the cap andpour the rinse aid into the dispen ser until the level indicato rturns completely black. The volume of the rinse aid conta iner isabout 140ml.

Be careful not to overfill the dispenser, because this couldcause oversudsing. Wipe away any spills with a damp cloth.Don't forget to replace the cap before y ou close the dishwasher

door.If you have soft water, you may not need r inse aid for it maycause a white film to develop on your dishes.

Main washdetergent Pre-wash

detergent

15 25

15 25

THE NORMAL DOSAGE PLEASE REFERENCE TO THE SECTION ENTITLED "WASH CYCLE TABLE"


7/13

5

The upper rack is desig ned to hold more delica te and lighter dishware such as glasses, coffee and tea cup and saucers, as wellas plates, small bowls and shallow pans(as long as they are not too dirty).Position the dishes and cookwar e so that they do not get moved by the spray of water.The upper rack can be adjusted for height by putting wheels of d ifferent height into the rails.

We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids,serv ing dishes and bowls, as shown in the figure to the right.It is preferab le to place serving dishes and lids on the side of the racks in order to avoid blocking the rota tion of thetop spray arm.

Pots, serving bowls, etc, must always be placed top down.

Deeppotsshouldbeslantedtoallowwatertoflowout.

Thebottom

rack

feature

fold

down

tine

rows

so

that

larger

or more

pots

and

pans

can

be

loaded.

1 Cups

2

3

4

Saucers

10

Soup plates

Dessert dishes

9

Dinner plates

Silverware basket

Dessert dishes

As the rinse aid diminishes, the size of the black dot on the rinseaid level indicator changes, as illustrated below. Full

3 / 4 ful l 1 / 2 ful l 1 / 4 full - Should refil l to elimin ate spotting Empty

2

43

10


8/13

6

Silverware should be placed in the silverware basket with handles at the bottom: If the rack has side baskets, the spoon shouldbe loaded individually into the appropr iate slots, Especially l ong utensils should be placed in the horizontal posit ion at thefront of the upper rack.

Digital sign: Display th e delayed time,remaining time and fault codes.

Wash sign: Display the sig n when washing.

Delay sign: Display the sign when delaying. Temperature display: Display the washtemperature at any time.

Running sign: Repeatedly displa y the sign inturn when running, no flicker when stoppin g.

Faucets is not opened.

The installation position of the drain pipe is too high.

Malfunction of temperature sensor or of heating element.

Too much inlet water. .

Short circuit or break of temperature sensor.

4

4

3 2

4

4

4

5

4

4

4

4

1

1

1

1

1

1

1

1

1

4

4

4

1

1

1

5

5

5

5

5

5

5

5

5

5

5

2

2

2

2

2

2

2

2

2

2

2

3

3

3

3

3

3

3

3

33

3

Do not let any item extend through bottom.

Teaspoons4

Soup spoons2

Forks1 Knife5

3 Dessert spoons


9/13

7

Coarse filterLarger it ems, such as pieces of bone or glass, that could clog the drain are trapped in thecoarse filter. To remove an item caught in this filter, gently squeeze the tabs on top of thisfilter and lift it out.

For your convenience, we have placed the drain pump and filtering system within easy reach inside the tub. There are threecomponents of the filtering system: the main filter, the coarse filter, and the fine filter.

2

Fine filterThis filte r holds soil and food residue in the sump area and prevents it from beingredeposited on the dishes during a cycle.

Main filterFood and soil particles trapped by this filter are pulverized by a special jet on the lower sprayarm and washed down the drain.

1

3

Never run the dishwasher without the filters i n place.

Filter assemblyFor best performance and results, the filter assembly must be cleaned.The filter efficiently removes food particles from the wash water, allowing it to berecirculated during the cycl e. For this reason, it is a good idea to remove t he largerfood particles trapped in the filter after each wash cycle by rinsing the semicircular

filter and cup under running water. To remove the filter assembly, pull on the cuphandle in the upward direction. The entir e filter assembly should be cleanedonce a week.To clean the coarse filter and the fi ne filter, use a cleaning brush. Then, reassemblethe filter parts as shown in the figures left and reinsert the entire assembly in thedishwasher, positioning in its seat and pressin g downward.The dishwasher must never be used without the filters. Improper replacement of thefilter may reduce the performance level of the appliance and damage dishes and utensils.

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

Cut off electrical power to the dishwasher.

Turn off the water supply and disconnect the waterinlet pipe from the water valve.

Drain water from the inlet and water valve.pipe

(Use a pan to catch the water.)

Reconnect the water inlet to thewater valve.

pipe

Remove the filter in the tub the bottomand use a sponge to soak up waterin sump.

5

4

3

2

1

It is necessary to clean the spray arms regularly for hard water chemicals will clog thespray arm jets and bearings. To remove the spray arm, screw off the nut to take out thewasher on top of the spray arm and remove the arm. Wash the arms in soapy and warmwater and use a soft brush to clean the jets. Replace them after rinsing them thoroughly.

ATTENTION : Do not put the fine filter upside down.


10/13

8

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowedto use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surf ace.

To clean the edge around the door, you should use only a soft warm, damp rag. To preven tpenetration of water into the door lock and electrical componen ts, do not use a spray cleanerof any kind.Also, never use abrasive cleaners or scour ing pads on the outer surfaces because they willscratch the finish. Some papers towels can also scratch or leave marks on the surface.

After every wash, turn off the water supply to theappliance and leave the door slightly ajar so thatmoisture and odors are not trapped inside.

Before cleaning or performin g maintenance, alwaysremove the plug from the socket. Do not run risks.

To clean the exterior and rubber parts of the dishwasher,do not use solvents or abrasive cleaning products.Rather, use only a cloth and warm soapy water.To remove spots or stains from the surface of theinterior, use a cloth dampened with water and a littlewhite vinegar, or a cleaning product made specificallyfor dishwashers.

When you go on holiday, it is recommened tha t you run awash cycle with the dishwasher empty an d then removethe plug from the socket, turn off the water supply and

leave the door of the appliance slightly ajar. This will helpthe seals last longer and prevent odors from formingwithin the appliance.

If the applian ce must be moved, try to keep it in the verticalposition.If absolutely necessary, it can be position ed onits back.

One of the factors that cause odors to form in thedishwasher is food that remains trapped in the seals.Periodic cleaning with a damp sponge will prevent thisfrom occurring.

After making sure that the voltage and the frequency values for the current in the homecorrespond to those on the rating plate and that the electrical system is sized for themaximum voltage on the rating plate, insert the plug into an electrica l socket which isearthed properly. If the electr ical socket to which the appliance must be connected is notappropriate for the , replace the socket,rather than using a adaptors or the like asthey could cause overheating and burns.

plug

Please see the rating lable to know the rating voltage and connect the dishwasher to appropriate power supply,Use required fuse12 amp. Fused electrical supply is required-copper wir e only. Time delay fuse or circuit breaker recommended and provideseparate circuit serving only this appliance. Outlet should be placed in adjacent cabinet .


11/13

9

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it isfastened tightly in place.If the water pipes are new or have not been used for an exten ded period of time, let the waterrun to make sure that the water is clear and free of impuri ties . If this precaution is not taken,there is a risk that the water inlet can get blocked and damage the appliance.

The water supply to the appliance can also be connected to the house hot water line(cent rali zed system, heating system),as long as it does not exceed a temperature of 60 C.In this case, the wash cycle time will be shortened by about 15 minutes and the washefficiency slightly reduced.The connect ion must be made to the hot water line following the same proced ures as thosefor the connection to the cold water line.

DIMENSIONS(mm)

Position the appliance in the desired location . The back should rest agains t the wall behind it, and the sides, along the adjacentcabine ts or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left tofacilitate proper installat ion.

If the sink is 1000 higher from the floor, the excess water in hoses cannotbe drained directly into the sink. It will be necessary to drain excesswater from hoses into a bowl or suitable container that is held outside and lowerthan the sink.

Inser t the drain hose into a drain pipe with a minimum diameter of 40 mm, or let it run into the sink, making sure to avoid bendingor crimping it. Use the special plasti c support that comes with the appliance . The free end of the hose must be at a heigh tbetween 400 and 1000mm and must not be immersed in water.

Max1000mm

Min400mm


12/13

10

Fuse blown, or thecircuit breaker acted

Replace fuse or reset circuit breaker. Remove any otherappliances sharing the same circuit with the dishwasher

Sound from soft food shredding action and detergent cup

opening.

Utensils are not securein the baskets or somethingsmall has dropped into

the basket

To ensure everything is secured in the dishwasher.

Motor hums Dishwasher has not been used regularly. If you do not use itoften, remember to set it to fill and pump out every week,which will help keep the seal moist.

Improper detergent

Add 1 gallon of cold water to the tub. Close and latch thedishwasher, then drain out the water by slowly turning theDial until a drain period is reached. Repeat if necessary.

Spilled rinse agent Always wipe up rinse agentspills immediately.

Detergent withcolorant was used

Make sure that the detergent is the one without colorant.

Rinse agent dispenseris empty

Make sure that the rinse agent dispense is filled.

Improper program

Improper rack loading Make sure that the action of the detergent dispenser and

spray arms are not blocked by large dishware.

Extremely hard waterLow inlettemperatureOverloading thedishwasherImproper loadingOld or damp powderdetergentEmpty rinse agentdispenserIncorrect dosage of

detergent

To remove spots from glassware:Take out all metal utensils out of the dishwasher.Do not add detergent.Choose the longest cycle.Start the dishwasher and allow it to run for about18 to 22 minutes, then it will be in the main wash.Open the door to pour 2 cups of white vinegarinto the bottom of the dishwasher.Close the door and let the dishwasher completethe cycle. If the vinegar does not work: Repeatas above, except use 1/4 cup (60 ml)of citric acid

crystals instead of vinegar.

Some audible sounds are

normal

'

Make sure the dishwasher is turned on and the door isclosed securely.

Check that the water supply is connected properly andthe water is turned on.

Make sure the power cord is properly plugged into thewall socket.

Power supply is notturned on

Water pressure is low

' Overflow The system is designed to detect an overflow. When itdoes, it shuts off the circulation pump and turns on thedrain pump.

Select stronger program

Use only the special dishwasher detergent to avoid suds.

If this occurs, open the dishwasher and let suds evaporate.


13/13

11

Combination of softwater and too muchdetergent

Use less detergent if you have soft water and select ashortest cycle to wash the glassware and to get them clean.

Tea or coffee stains using a solution of 1/2 cup of bleach and 3 cups warm waterto remove the stains by hand.

You have to wait for 20 minutes after a cycle to let the heatingelements cool down before cleaning interior; otherwise, burnswill happen.

Iron deposits in watercan cause an overall film

You have to call a water softener company for a special filter.

Hard water minerals To clean the interior, use a damp sponge with dishwasherdetergent and wear rubber gloves. Never use any other cleanerthan dishwasher detergent for the risk of foaming or suds.

Dial is not in theposition

OFF Turn the Dial to OFF position and sl ide the door latch to the

left.

Dishes block detergentcups

Re-loading the dishes properly.

Normal phenomenon There is some steam coming through the vent by the doorlatch during drying and water draining.

Aluminum utensils haverubbed against dishes

Use a mild abrasive cleaner to eliminate those marks.

'

This is normal A small amount of clean water around the outlet onthe tub bottom at the back of the tub keeps the waterseal lubricated.

Be careful not to overfill the rinse aid dispenser.Spilled rinse aid could cause oversudsing and leadto overflowing. Wipe away any spills with a damp cloth.

Make sure the dishwasher is level.

Overfill dispenser or rinseaid spills

Dishwasher isn t level'

Adp6000ix User Manual

Documents

Transcript of Adp6000ix User Manual