Admission to DOCTORAL (Ph. D) & M.E. BY RESEARCH … PhD 2014-15 28 12 14.pdfGHRCE/R&D/Ph.D/Form-1...

GHRCE/R&D/Ph.D/Form-1

INFORMATION BROCHURE

Admission to

DOCTORAL (Ph. D) & M.E. BY RESEARCHDEGREE PROGRAMMES

(2014-2015)

G.H. Raisoni College of Engineering(An Autonomous Institution under UGC Act 1956 and

Affiliated Rashtrasant Tukadoji Maharaj Nagpur University Nagpur))

CRPF Gate-3, Hingna Road, Digdoh Hills, Nagpur (M.S.)Phone: (07104) 236383,235669

Fax: (07104) 232560E-mail: [email protected]

Web site: www.ghrce.raisoni.net


Courses Offered

DOCTORAL PROGRAMMES

Ph.D. Programmes are offered in:

1. Ph.D. in Electrical Engineering

2. Ph.D. in Mechanical Engineering

3. Ph.D. in Electronics Engineering

4. Ph.D. in Computer Science and Engineering

5. Ph.D. in Civil Engineering

6. Ph.D. in Information Technology

7. Ph.D. in Electronics and Telecommunication Engineering

M.E. BY RESEARCH:

M.E. (By Research) offered in:

1. ME (By Research) in Electrical Engineering

2. ME (By Research) in Mechanical Engineering

3. ME (By Research) in Electronics Engineering

4. ME (By Research) in Computer Science and Engineering

5. ME (By Research) in Civil Engineering

6. ME (By Research) in Information Technology

7. ME (By Research) in Electronics and Telecommunication Engineering


Our Inspiration

Mrs. Shobha Raisoni M.D., RGI

Shri Sunil RaisoniChairman, RGI

The G H Raisoni College of Engineering was established in 1996 for providing leadership in education and research with a focus on science and technology. Over a period of about one decade, about 5,000 students have graduated from the institute with Bachelors, Mastersdegrees. Today, G H Raisoni College of Engineering is a leading institution globally for education in engineering and management.

The institute is committed to playing a key role in creating an ambience for nurturing the engineers and leaders of tomorrow. In doing so, we hope to make significant contributions to the development of the country and improvement in the quality of life of its citizens. For this, we need to pursue a strategy that fosters creativity, supports interdisciplinary research and education. G H Raisoni College of Engineering is an essential component of this strategy.We are proud to say that the institute is ideally placed to exploit the synergies with the industries located in the heart of India- Nagpur.


Our Dynamic Leadership

Dr. P. R. Bajaj

DIRECTORG.H. Raisoni College of Engg.

The scenario of Technical education is changing rapidly and change in attitude and facilities have become a must for all the Institutions in India. Since the early eighties, due to rapid industrialization and economic growth, engineering and technical education in India have been developing faster than anywhere else in the world, and India now has the second largest number of engineering students in the world. Recent Indian scientific, industrial and technological developments have earned India world recognition as an emerging global power.

At GHRCE, We have adopted standard competitive research and object-oriented Post Graduate Engineering study courses. These are innovative in nature and offer tremendous advantages and benefits to students. We believe that with these post graduate courses linked with industries and research organizations we can meet the present and future challenges of rapid technological changes and industrial development in our country.

I am delighted to tell you that GHRCE is the first institute in the region to undergo PG accreditation. We provide high standard of education at both the undergraduate and postgraduate levels. The institute lays special emphasis on human values & ethics, apart from academic excellence. For many years we have upheld a proud record of funding for research, and we have established a solid reputation for research achievements in many different fields and across many different disciplines. This reputation has attracted talented teachers and students to our Institute, further enhancing the quality of our research.


Our students have access to state of art library, computational facilities, and we aim to keep our digital systems up-to-date, in order to provide the most advanced knowledge acquisition system.

The interests of our students are at the heart of everything we do and providing high quality learning opportunities within a supportive environment is one of our main aims. The academic success of our students is very important to us and we will make every effort to help and support them.

Thank you for choosing GHRCE as a preferred institute for pursuing your M.E. by Research and Doctoral programme. I look forward to welcome you and do hope that if selected you will have a rewarding experience in the institute.


Our Vision

To achieve excellent standards of quality education by keeping pace with rapidly changing technologies and to create technical manpower of global standards with capabilities of accepting new challenges.

Our Mission

Our efforts are dedicated to impart quality and value based education to raise satisfaction level of all stake- holders. Our strength is directed to create competent professionals. Our endeavor is to provide all possible support to promote research and development activities.

Preamble

G.H. Raisoni College of Engineering Nagpur (GHRCE) is the flagship institute of Raisoni Group of Institutions

(RGI). It is a premier research institute in Central India which has set many benchmarks in very short span of a

decade. It is conferred with Autonomous Status under UGC Act 1956. It has received NBA Accreditation &

Reaccreditations for upper span of 5 years for most of courses. Received World Bank Assistance under TEQIP-I

Project and was awarded Highest Audit Score of 9.7 / 10. Institute has received prestigious World Bank Assistance

project under TEQIP-II (Only 02 Private Institutions from Maharashtra and 14 all over India got TEQIP-II).

It has partnered with IIT Powai for providing distance engineering courses under C-DEEP scheme and with IIT

Madras for QEEE program. GHRCE has received highest no. of Sponsored research projects from DST, AICTE and

other reputed agencies. The Academics is backed up with 7 UG, 12PG and MBA, MCA courses along with 7

doctoral courses with highest intake of 1284. The intellectual capital is very strong with highest no. of Ph.Ds. It has

hosted series of IEEE International Conferences (ICETET) in India and Abroad. Institute has started International

Journal on Emerging Trends in Engineering & Technology (IJETET). GHRCE has been identified as member of

National Knowledge Functional Hub (NKFH)-a joint initiative of Higher Education and FICCI wherein only 5

members have been selected nationwide.


A. DOCTORAL PROGRAMMES (Ph.D PROGRAMME)

G H Raisoni College of Engineering offers Ph.D. degree through its various Departments. The award of Ph.D. degree is in recognition of high academic achievements, independent research and application of knowledge to the solution of technical and scientific problems in Engineering and Technology. Creative and productive inquiry is the basic concept underlying the research work.

The Institute also encourages interdisciplinary areas through a system of co-supervision and provides excellent opportunities for such programmes.

The research work shall be an original work characterized either by the discovery of facts, or by a fresh approach towards the interpretation and application of facts. It shall demonstrate the candidate’s capacity for critical examination and sound judgment and shall represent original contribution to the existing knowledge.

The degree of Doctor of Philosophy is granted for research work in areas recognized by the academic departments of the Institute. The degree of Doctor of Philosophy will be awarded in the discipline of the department in which the candidate is registered.

Departments have excellent R & D facilities and also tie up with national & International Labs & Center of Excellence.

Courses offering Ph.D Programme are:

1. Ph.D. in Electrical Engineering2. Ph.D. in Mechanical Engineering3. Ph.D. in Electronics Engineering4. Ph.D. in Computer Science and Engineering5. Ph.D. in Civil Engineering6. Ph.D. in Information Technology7. Ph.D. in Electronics and Telecommunication Engineering

B. M.E. by ResearchCourses offering ME by Research Programme are:

1. ME (By Research) in Electrical Engineering2. ME (By Research) in Mechanical Engineering3. ME (By Research) in Electronics Engineering4. ME (By Research) in Computer Science and Engineering5. ME (By Research) in Civil Engineering6. ME (By Research) in Information Technology7. ME (By Research) in Electronics and Telecommunication Engineering


Research Facilities available

Name of

Department

Name of Laboratory Research Facility

Computer Science

& Engineering

Network Lab OPNET IT Guru Network Simulator

Wireless Access Points

Wireless LAN Cards

Software Engg. lab IBM Rational Rose Software

Multimedia Lab Infrared Thermal Camera

Embedded & Wireless

Communication Lab

Embedded Development Kits

Mechanical

Engineering

Energy Conversion

Lab.

Internal Combustion Engine test set up,

Automotive Exhaust air pollution,

Compressed Air.

Refrigeration & Air

Conditioning Lab.

Alternative refrigerants, Performances

improvement of convectional and non

convectional refrigeration system.

CAD/CAE Lab. ANSYS Multi-physics 9.0 software for structural

and Thermal analysis. Unigraphis NX4

CAD/CAM -Nastran software for 2D/3D

Modeling.

Heat Transfer Lab. Performance and testing of Heat exchangers.

Automation in

Production lab

Six axis vertically articulated robot set up,

XLTURN CNC Lathe and milling machines

Electrical

Engineering

High voltage Impulse generator, 100 KV AC , 140 KVDC,

420 KV impulse. 2.94 kj, three stage

Storage CRO

Tan Delta System

FACTS Transmission line model

SVC, VSC based FACTS Devices

Power scope

Phase shifting Transformer

Switch Gear Protection Advance Numeric Relays

Control and Power

System

Transmission line simulator with FACT devices

Advanced electrical

drives

3-ph SRM-IGBT Power Module

1 PH S R Motor

SRM Module of Motor Pro Software

Drives: - PLC Trainer kit, PLC, RS Logix

Software & communication cable

Wind Generator Lab Wind generator panel

Electronics Test and measurements Universal Calibrator


Engineering lab 9 in 1Test Lab

Hand Held DSO

Programmable Multimeter

Embedded System lab Stand Alone Logic Analyzer (34 channel) (make-

Techtronix) , Universal Programmer,

LabView, Multisim, MultiMCU,

NI ELVIS Hardware board,

Embedded Development Tool for 8051

Microcontroller- KEIL PK 51,

ARM Microcontroller- KEIL MDK- ARM, ARM

Microcontroller Evolution Board for Philips -

KEIL MCB2103,KEIL ULINK (USB JTAG link

Adapter for ARM controller), 8051C Kits

Electronics Workshop

Lab

Double sided PCB development equipments like

Proto-contact PCB Artwork Film Maker

Proto-Etch Etching Machine

Photo Dye/developer (2 in 1)

Motorized roller Tinning Machine

Proto-Shot (Compact Vertical reprographic

Camera)

Thru-hole-plating system (PTH)

Dry film laminator

Photo developer /stripper

Wave Soldering machine.

Advance

Communication lab

Optical Communication System Design

equipment like

Fiber optic power meter

Fiber optic LED light source

Fiber optic continuity tester

Fiber optic video link

Fiber optic Connectorization cum splicing Kit

Fiber optic trainer system

Optical Time Domain Reflectometer (OTDR)

Power Quality Analyzer

VisSim Software,

Wireless Sensor Kits

DSP starter kits (TMS320C5416,

TMS320C6713),

Spectrum Analyzer (3.3 GHz)

Telephony Lab CDMA Kit ,GSM Kit, Mobile Trainer, Telephone

Trainer system

LAN trainer System, GPS Trainer system

Analog and Digital

Lab

Xilinx 9.1, ModelSim , Altera

MaxPlus- II, Tanner Tool for VLSI

Soft Computing Lab MATLAB with all toolboxes


I] Registration procedure for Doctoral Programmes (Ph.D) and M.E. (By Research) Programmes of Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur as per Direction No. 29 of 2012 (refer website www.nagpuruniversity.org)

1. Download the application form of Institute and submit along with DD/cash of Rs.1000/- to R&D cell.

2. Submission of application form of Institute along with one copy of synopsis duly signed bycandidate and approved supervisor (Co Supervisor if applicable) and attested copies of marksheets and degree certificates to R&D cell.

3. Appear for Pre-registration seminar in respective department as per schedule.

4. Based on recommendation in Pre-registration seminar, candidate has to deposit prescribed fees and submit the original application form of Institute along with synopsis and attested documents to student section. Photo copy of the same form and synopsis along with receipt of fees is to be submitted to R&D cell and respective department.

5. Submit form as given in Annexure I of Direction No.29 of 2012 to Head, Place of research.

6. Duly filled form of Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur along with eight copies of synopsis and attested copies of documents is to be submitted to Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur.

7. Photocopy of the duly filled University form along with receipt of registration fees is to be submitted to Student section, R&D cell and respective department.

II] Eligibility

ProgrammesEligibility

M.E. (by research) As per ordinance

Ph.D Programme as per Direction No. 29 of 2012


III] Fees

Candidates desirous of seeking admission to any of the M.E. by Research and Ph.D programme must deposit demand draft of required amount (refer table below) drawn in favour of the Director, G. H. Raisoni College of Engineering Nagpur, payable at Nagpur or cash payment at the College Bank Counter.

Sr. No.

Name of Programme

Fees per Annum (Rs.) Caution Money(Refundable)

1 Doctoral (Ph.D) Rs. 50,000/- Rs. 2,000/-

2 M.E. by Research Rs. 50,000/- Rs. 5000/-

Prospectus and application form is to be purchased by paying Rs.1000/-.Examination fees for Ph.D and M.E. by research will be charged separately as per RTM Nagpur University/ Rules and regulations of G. H. Raisoni College of Engineering (An Autonomous Institution under UGC Act 1956), Nagpur as applicable from time to time.


IV] List of approved supervisors

Ph.D SUPERVISORS IN ENGINEERING & TECHNOLOGY

LIST OF INTERNAL SUPERVISORS

Sr.No. Name of faculty Ph.D. in Ph.D. Guide Registration Number

1. Dr. P.R. Bajaj Electronics Engg. Ph.D. (Cell)/RRC/Guide/E&T/4242/O/332 (4/12/2006)

2. Dr. A.Y. Deshmukh Electronics Engg. Ph.D. (Cell)/RRC/Guide/2241/B/981 (18/4/2012)

3. Dr. S.S. Dorle Electronics Engg. Ph.D. (Cell) / RRC / Guide / 2242 / B / 980(18/4/2012)

4. Dr. M. M.

Khanapurkar

Electronics Engg. Ph.D. (Cell)/RRC/Guide/2251/B/1013 (18/4/2012)

5. Dr. S. L. Haridas Electronics Engg. Ph.D. (Cell)/RRC/Guide/1492 Nagpur, dated 14/01/2013

6. Dr. D. V. Padole Electronics Engg. Ph.D. (Cell)/RRC/Guide/2250/B/1014 (18/4/2012)

7. Dr. S. S. Salankar Electronics Engg. Ph.D. (Cell)/RRC/Guide/ELECTRONICS ENGG/197/ 26/10/2009

8. Dr.S.D.Giripunje Electronics Engg. In process

9. Dr. V.M. Kriplani Mechanical Engg. Ph.D. (Cell) / RRC / Guide / Acad / Recg / Guide / K /318 (21/4/99)

10. Dr. S.B. Jaju Mechanical Engg. Ph.D. (Cell)/RRC/Guide/205B/169 (26/10/2009)

11. Dr. D. J. Tidke Mechanical Engg.

12. Dr. U. S. Wankhede Mechanical Engg. Ph.D. (Cell) / RRC / Guide / 1512 Nagpur, dated 17/01/2013

13. Dr. P. V. Walke Mechanical Engg. Ph.D. (Cell) / RRC / Guide / 1513 Nagpur, dated 17/01/2013

14. Dr. R. N. Baxi Mechanical Engg. Ph.D. (Cell) / RRC / Guide / 1994Nagpur, dated 04/04/2014

15. Dr.V.N.Baiswar Mechanical Engg. In process

16. Dr.P.B.Nagarnaik Civil Engg. Ph.D. (Cell) / RRC / Guide / E&T / 113 / B / 476(10/1/2008)

17. Dr. P. Y. Pawade Civil Engg. Ph.D.(Cell)/RRC/Guide/61 dated 05/04/2014

18. Dr. B. V. Khode Civil Engg. Ph.D.(Cell)/RRC/Guide/1459 dated 16/1/2013


19. Dr. S.G. Tarnekar Electrical Engg. Ph.D. (Cell) / RRC / Guide / E&T /3459/B/536

20. Dr. V.K. Chandrakar Electrical Engg. Ph.D. (Cell) / RRC / Guide / E&T / 117 / B/4821(10/1/2008)

21. Dr. S.R. Vaishnav Electrical Engg. 188B/153 (26/10/2009)

22. Dr.P.M.Daigvane Electronics Engg. Ph.D. (Cell) / RRC / Guide / 66Nagpur, dated 05/04/2013

23. Dr. L.G. Malik Computer Science & Engg. PH.D. (CELL)/RRC/GUIDE/1476 NAGPUR, dated 16/01/2013

24. Dr.U.N.Shravankar Computer Science & Engg. In process

25. Dr. B.P. Butey Physics Ph.D. (Cell)/RRC/Guide/3584 (12/9/2008)

26. Dr. R.R. Shrivastava Chemistry Ph.D. (Cell) / RRC / Guide / 109B / 73(23/10/2009)

LIST OF APPROVED SUPERVISORS FOR ME BY RESEARCH


Sr.

No.

Name of the Supervisor Department

1 Dr. P. R. Bajaj

Electronics Engineering Department2 Dr. Amol Y. Deshmukh

3 Dr. Sanjay S. Dorle

4 Dr. Dinesh V. Padole

5 Dr. Milind Khanapurkar

6 Dr. Sanjay Haridas

7 Dr. P.Y. Pawade Civil Engineering Department

8 Dr. P.B. Nagarnaik

9 Dr. B.V. Khode

10 Prof. P.J. Wadhai

11 Dr. S.G. Tarnekar Electrical Engineering Department

12 Jagdish G. Choudhari

13 Rupesh S. Shelke Mechanical Engineering Department

14 Dr. Pramod V. Walke

15 Dr. Uday S. Wankhede

16 Dr. V.M. Kriplani

17 Dr. S.B. Jaju

18 Dr. L. G. Malik Computer Science & Engineering

19 Dr. U.N. Shrawankar

20 Ms. S.A. Chabria

Note: Registration of external supervisors at GHRCE, Nagpur would be at the discretion of Research Center.

FACULTY PROFILE


The college has technically rich faculty with Doctorate qualifications. It comprises highly qualified, well-trained faculty

possessing sound teaching, research as well as industrial experience with excellence in their fields. The faculties keep

themselves abreast of the technological developments in the concerned fields through active participation in various activities

like seminars, conferences, training programs and guest lecture etc. Eminent guest faculties from industries / IITs/ Foreign

Universities and institutions are regularly invited to make the students aware of the latest research and development in the field.

1.

Name: Dr.Preeti Bajaj

Qualification: Ph.D.(Electronics), MBA

Area of Specialization /Research: Intelligent Transportation System with soft computing, Hybrid Intelligent systems

design

Total Experience: 22 Yrs

Industrial Experiences if any: Consultant, National Highways Authority of India

Number of Publications

Book : Three Chapters in International Book

Journal (National & International): 16-International

Conferences (National & International): 62 - International

6 - National

Ph.D. Guided:

Name of student Area Name of topic

M.M. Khanapurkar Intelligent

Transportation

systems

Vehicular Communication: A Design for Some

Intra-vehicular Communication applications

with VLSI Tools

D. V. Padole Embedded Systems Optimum prototype Design of Embedded

Controller for Some Applications in Intelligent

Transportation Systems

Sharada Devi Image Processing Design & Development Of Some Methodology

For Driver Monitoring System With Non

Interencive Approach

Prema Diagavane Intelligent

Transportation

systems

Some Strategies For Analysis Of Traffic Flow

On Highways With Computer Vision

Algorithms Soft Computing Tools

Prashant Sharma Intelligent

Transportation

systems

A Design Approach to Hybrid Intelligent

System with Type Z Fuzzy Logic For Some

Applications of Intelligent Transportation

System

Shubhangi D Giripunje Image Processing A Design & Implementation of Simulation

Facial Action Tracking & Emotion Recognition

Based on Non Intrusive Parameters

Ph.D. Ongoing: 04


M.Tech./ ME Project guided: 15 Students

Reviewer For International journal / conference:

Chaired the Sessions in the Conferences.

o International conferences in SICE99 Moriokka, Japan

o Chairperson for International conferences in SICE2000 Izzuika, Japan

o Session Chair ‘Zeal 2001’for Neural Networks Session, at BDCOE, Wardha.

o Session Chair ‘Shanshodhan’ for IEEE Branch at PCE On 9th

April 2004.

o Session Chair for National Conference ‘Axis 2004 ’ for IEEE Branch at VNIT in 2004

o Chairperson for 2 sessions on Hybrid Intelligent systems for International Conference KES 2004 at

Wellington NewZaeland .

o Chaired Session in ICETET 09 and ICETET2010, ICETET 2011, ICETET 2012 in Human Centered

Transportation System

As Reviewer in the Journals

o Reviewer of International journals IJPRAI- International journal of pattern recognition and Artificial

Intelligence

o Reviewer of International journals IDT- Intelligent decision technologies

o Reviewer of International journals JAIS

o Reviewer of International journals IJSSST

o Regular Reviewer for IEEE transaction on Systems, Man and Cybernetics, Part A

o Reviewer for Scientific Journals International

o Regular reviewer For IEEE Transactions on IEEE VT-Vehicular Technology

Member International Technical Programme Committee

Knowledge Base Engineering System KES 2006, U.K.

Member of conference committee of the multi conference IMECS 2007 as conference co-chair.

Member of the international Committee on AICIT''s international conference series UK

Member, Technical Program Committee for UKSim 2009 (UKSim 11th International Conference on

Computer Modeling and Simulation) Cambridge

Program committee member 10th international conference on Knowledge-based and Intelligent

Engineering Systems, Bourremath, UK (9-11 Oct)

PC Memebr for the track “Dependable Systems and Autonomic computing/Networking” in AINA 2010

(IEEE 24th International Conference on Advanced Information Networking and Applications)

Program Committee Member or potential member for The 5th IEEE Vehicle Power and Propulsion

Conference 2009 (VPPC'09 Regular Track : Modeling, Simulation, Dynamics, and Control)

Program Committee Member- The International Conference on Soft Computing and Pattern Recognition

(SOCPAR 2009)

World Congress on Nature and Biologically Inspired Computing (NABIC 09 )

CSSim2009 (Brno International Conference on Computational Intelligence, Modeling and Simulation

2009).

CICSyN2009 (1st Int Conference on Computational Intelligence, Communication Systems and

Networks).

Program committee for this 7th international conf. on CIPR2010.


INC09- Symposium on Innovations in Natural Computing

PC Chair ISA2010, 4th International Conference on Information Security & Assurance

ISMS 2010, 1st International Conference on Intelligent Systems, modeling & Simulation

IV2010

NaBIC2010

ITSC 2010

TCUMT 2010

S2ES2010

HIS2011

SMCS2011

SMCS2012

International recognition

Member of international technical Committee/ Member program Committee

Reviewer for IEEE Conference for Systemic, Cybernetics and informatics conference SCI2001- SCI

2001, 2002, 2003, 2004, 05,06 Orlando, Florida,

Reviewer for International conference KES 04, KES 05 & KES 06

Reviewer for IEEE Conference on Intelligent Transportation System ITSC-04, ITSC05, ITSC-06,

ITSC 07

Program Committee member for KES 2006, KES 2009 U.K.

Member of International Advisory Board & Member program committee of NaBIC'09 -2009 World

Congress on Nature & Biologically Inspired Computing, to be held during 9-11 Dec'09

Member of AICIT''s international conference series UK

Member, Technical Program Committee for UKSim 2009 (11th International Conference on

Computer Modeling and Simulation) Cambridge

Member of conference committee of the multi conference IMECS 2007 as conference co-chair.

PC Member for the track “Dependable Systems and Autonomic computing/Networking” in AINA

2010 (IEEE 24th International Conference on Advanced Information Networking and Applications)

Program Committee Member or potential member for The 5th IEEE Vehicle Power and Propulsion

Conference 2009 (VPPC'09 Regular Track : Modeling, Simulation, Dynamics, and Control)

Program Committee Member- The International Conference on Soft Computing and Pattern

Recognition (SOCPAR 2009)


Name : Dr.A.Y.Deshmukh

Qualification : Ph.D.(Electronics),

M.E(Electronics), B.E.

Area of Specialization /Research :VLSI, Hybrid Systems

Total Experience : 14 Yrs

Industrial Experiences : 1 Year


Journal (National & International) : 08 International

Conferences (National & International): 16-international

14- National

Ph.D students registered:


Aruna D. Tete Embedded

System

Design of Electronic Measurement system for

velocity of Detonation of bulk Explosives

Kapil Kamalkar Jajulwar VLSI Systems Design Of Autonomus Navigation System with

Simultanious Location and Mapping (SLAM)

Techniques

Abhay Haribhau Kshirsagar Embedded

Systems

Design Of Reconfigurable And Scalable

Wireless Body Area Network (BAN) For

Secured Communication

Swati R. Kirtane VLSI Systems Design Strategies Edge Based Image

representation System with VLSI

Laxman Thakare VLSI Systems Strategies for design of architecture of

FFT/IFFT using advanced algorithm for

wireless communication

Pradnya Zode VLSI Systems Design of low power high speed VLSI DSP

systems

M.M.Pathan VLSI Systems FPGA based implementation of adaptive neuro

fuzzy inference system for non-linear

application


M.Tech/ ME Project guided:

Area Name of topic

VLSI Systems FPGA implementation of Adaptive LMS Predictor

Design of Four-Way Set-Associative Multi Level CMOS Cache

Memory

CMOS Based optimized Smart Controller: A Design Approach

VHDL Implementation & optimization of Fuzzy controller for

Autonomous Mobile Systems

CMOS Mixed signal design of fuzzy logic based system

VHDL-AMS Based fuzzy logic controller

VLSI architecture implementation with complex fuzzy system

Structural Synthesis of Cell-Based VLSI Circuits using A Multi-

Objective Genetic Algorithm

Design of Cortical Neural Network Circuits with CMOS Technology

Design of Multicore System by using Leon Processor

Design Approach for neural network Classification using Adaptive

Resonance Theory Network

Design of Fuzzy Adaptive Resonance Theory Structures With VLSI

Design Approach


o International Journal of VLSI Design- Hindawi Publishing Corp

o International Journal-Intelligent Decision Technologies

o International Journal-IJSSST

o International Conference-IFTOMM

o International Conference-ICETET-08, ICETET-09, ICETET-10

Professional Body Affiliation:

Member, IEEE

Technical Committee Member of SMCS of IEEE USA

Life Member, ISTE

Member, CSI

Working as Counselor, IEEE student branch, GHRCE.


Name : Dr. Sanjay S. Dorle

Qualification : B.E (Electronics)

M.Tech (E D T)

Ph.D (Electronics Engineering)

Area of Specialization /Research : Automotive Electronics

Total Experience : 14 years

Industrial Experience : 01 year


Journal (International) : 04

Conferences (International) : 09

Ph.D students registered: 01 (In Process)


Atul Deshmukh Vehicular

Communication

Design of Routing & Mobility Models for

Vehicular Adhoc Network


Area Name of topic

Vehicular Adhoc

Networks (VANET)

Design Approach for Reliability Improvement of the Routing path in

VANET

Vehicular System communication Protocol using Emergency Call

Boxes

Design of Anticollision Mechanism between Vehicle to Vehicle for

improving safety Operation in ITS

An Improved Data Reduction Protocol: A Design Approach

Interference Free CDMA Technology Based on Eigen Algorithm

Design of Protocol for Intersection Collision Detection & Warning in

ITS

Policy Based Location Privacy Management using Mobile Adhoc

Networking

Design of Vehicle Safety system by using dedicated short range

Communication



1. Reviewed research papers for the International conference ICETET-08.

2. Reviewed research papers for the International conference ICETET-09.

3. Reviewed research papers for the International conference VPPC-08.

4. Reviewed research papers for the International Journal IEEE – VTC.

5. Reviewed research papers for the International conference IEEE WSN-10.

6. Reviewed research papers for the International conference ICETET-11

7. Reviewed research papers for the International conference ICETET-12

Resource Person

1. Chairperson for the students ISTE sponsored Paper presentation at Priyadarshini College of Engineering, Nagpur,

2005.

2. Delivered expert lecture at one week workshop on “VHDL design and Applications” at G. H. Raisoni Polytechnic,

Nagpur, 2008.

3. Delivered an expert lecture in ISTE Sponsored short term training Programme on “Embedded Microcontroller &

RTOS” at GHRCE on 5th

July 2006.

4. Delivered an expert lecture in AICTE Sponsored Staff Development Programme on “Wireless & Mobile

communication” at Priyadarshini College of Engineering, Nagpur on 6th

September 2009.

5. Delivered an expert lecture in AICTE Sponsored Staff Development Programme on “Advanced Wireless

Communication” at Umrer College of Engineering, Nagpur on 13th

February 2009.

6. Invited as Session Chair for National Level Conference “NIRMITI-2011” on 8-9th

March 2011 at Priyadarshini

Institute of Engineering & Technology, Nagpur


IEEE Member.

Life Time ISTE Member.

Life Member CS


Name : Milind M. Khanapurkar

Qualification : Ph.D (Electronics Engineering)

M. Tech (Electronics Design & Technology),

M.B.A. (Marketing Management)

Area of Specialization /Research : Intelligent Transportation System (Vehicular Networks,

Intra-vehicular Communication and Embedded Systems),

VHDL-VLSI System Designing, Modeling and Prototyping

Academic Experience : 23 years

Industrial Experience : 01 Year in EL-DIGI Systems Mumbai


Book : One Chapters in International Book

Journal (National & International) : 07-International

Conferences (National & International) : 14 -international

6- National

Ph.D students registered: 04

ME by Research students registered :03

Reviewer For International journal / conference

As Reviewer in the Conferences

Member of reviewer panel for SANSHODHAN national level paper presentation conference at

PCEA Nagpur.

Committee member for KRITI-08 (Student Tech Festival ) and In charge Pape Presentation

competition-TECHNORION-2010, TECHNORION – 2011

Professional Affiliations:

IEEE

SMC

LMIST

CSI

MIE


Name : Dr. S. L. HARIDAS

Highest Qualifications : Ph. D.

Area of Specialization /Research : Electronics Engg.,

Digital Comm., Wireless Comm.

Total Experience : 24 yrs.

Number of Publications :

Journals (National & International) : 04

Conferences (National & International) : 7- International

3- National

Ph. D. students registered (applied):


S. Tadse Electronics Engg. Design of asynchronous Viterbi decoder using minimum

transition hybrid register exchange method for low power

application

S. Tembhurne Electronics Engg. Design of Energy Efficient MEMS Operating Switch

G. D. Korde Electronics Engg. Low Power Asynchronous Viterbi Decoder for Wireless

Applications

Reviewer For International journal / conference: 3

Session chaired for International Conferences : 4


Name : Dinesh V. Padole

Qualification : Ph.D (Electronics Engineering),

M.Tech (EDT)

Area of Specialization /Research : Embedded Systems, Multi-core SoCs

and Digital Signal Processing

Total Experiences : 10Year

Number of Publications:

Book : Two chapters published on international book

Journal (National & International) : 08

Conferences (National & International) : 21


M.Tech Project guided: 15 Student, 6 ongoing

Area Name of topic

Communication

System

Design & Implementation of LDPC-Coded MIMO OFDM System

Embedded System Design & implementation of DCT and IDCT core using VHDL

Design of hybrid network protocol in VHDL

Design and implementation of Advanced Microcontroller Bus

Architecture (AMBA) Controller Using VHDL

Design of BUS arbiter for on-chip shared bus multiprocessor

system

Design of time triggered shared bus architecture for a multicore

system on chip using VHDL

Design of Efficient Bus Arbiter for On-Chip Shared Bus Multi-

Processor System

Design of Multicore System by using Leon Processor


Reviewer for International Conference IEEE VPPC 09, USA

Reviewer for International Conference ICETET 08, ICETET 09, & ICETET 10, India.

Session chaired for International Conferences

Chaired the Technical Session in International Conference ICETET 08, India, 16-18 July 2008

Chaired the Technical Session for Paper Presentation at SPCOE, Nagpur, India, Sept 09.

Chaired the Technical Session in Paper competition at YCCE, Nagpur “Spandan” , 2007

Chaired the Technical Session in International Conference ICETET 10, Goa, India, and Nov.2010.

Chaired the technical Session in “XI Annual ISTE Students' Convention Maharashtra-Goa Section”,

KITS college Ramtek, Nagpur, Dec 29-30, 2011


Chaired technical Session in International conference organized in Nagpur, 2012.

Chaired Technical Session in National Conference of Electronics, Computer and Management,

organized by KITS college Ramtek, Nagpur, March 24, 2013

Membership of Professional Bodies:

IEEE Member. (Since 2004)

Member IEEE SMCS Chapter

ISTE life Member.

Computer Society of India (CSI) Member.


Name : Dr. Shubhangi Giripunje

Qualification : B.E (Electronics)

M.E.(Digital Electronics)

Ph.D (Electronics Engineering)

Area of Specialization /Research : Soft Computing, Image processing


Industrial Experience : 01 year


Journal (International) : 06

Conferences (International) :09

Conferences (national) :02

Ph.D students registered: Nil

M.Tech/ ME Project guided: 10


Reviewed research papers for the International conference ICETET-08.

Reviewed research papers for the International conference ICETET-09.

Reviewed research papers for the International conference ICETET-11

Reviewed research papers for the International conference ICETET-12

Reviewer form International Conference ICCSIT 2011,Cheugdu, China.

Reviewer form International Journal of computer engineering Research.


IEEE Member.

Life Time ISTE Member.

Life Member ACM

Life Member IE


Name : Dr.S. S. Salankar

Qualification : Ph.D

Area of Specialization /Research : Signal Processing, Image Processing

& Soft Computing

Academic Experience : 23 years





Name : Dr. Pramod V.Walke

Qualification : M.Tech. (Heat Power Engineering)

Ph.D (Mechanical)

Area of Specialization /Research : Internal combustion engine,

Solar Energy

Total Experiences : 20 Yrs.



Conferences (National & International): 09

Ph.D students registered :03

M.Tech / ME Project guided:

Area Name of topic

Internal combustion

engine

Development and testing of exhaust gas recirculation system for compression

ignition engine

Internal combustion

engine

Mathematical modeling of catalytic converter for four stroke diesel engine

Internal combustion

engine

Development of Heat Exchanger for Straight Vegetable Oils and it’s

Performance Analysis for C. I. Engine

Solar Energy Experimental Analysis of Heat Gain by Flat Plate Solar Thermal Collector by

using different Fluids

Solar Energy Experimental evaluation of A Single Basin Solar Still using different

absorbing material.


Solar Energy Experimentation and Simulation of Solar Inverter.

Solar Energy Development and Experimentation of cost effective parabolic solar

concentrator

Heat Transfer Thermoelectric air cooling for cars

Heat transfer Experimental investigation of forced convection heat transfer inside vertical

helical coiled tubes


Reviewer for Technical papers in International Seminar and Exhibition on Non –Convectional Energy

Sources and Urban/Rural Economy in developing countries organized by Institution of

Engineering(India) Nagpur, on 9-10 February 2010.

Reviewer for Technical papers for International conference ICETET-2008 organized by G.H. Raisoni

College of Engineering, Nagpur, on July 16-18, 2008


College of Engineering, Nagpur, on Nov. 19-21, 2010 at BITS Pilani, Goa campus


College of Engineering, Nagpur, on Nov. 18-20, 2011 at Mauritius


Session chaired for International Conferences on Emerging Trends in Engineering and Technology,

ICETET 2010.

Session chair for Technical papers presen tation for International conference ICETET- 2011 organized by

G.H. Raisoni College of Engineering, Nagpur, on Nov. 18-20, 2011 at Mauritius.

Session chair for Technical papers presentation for International conference ICMETSS-2012 organized

by Central India Group of Institutions, Nagpur & Choice Institute of Management Studies & Research,

Pune, on April. 28-29, 2012 at Hotel Tuli Imperial, Nagpur.


Name : Dr. V.M.Kriplani

Qualification : M.Tech., Ph.D (Heat Transfer)

Area of Specialization /Research : Thermal Engineering, Heat Transfer,

Refrigeration and Air –Conditioning,

Energy conversion, I.C. Engines

Total Experiences : 47 Years





Name of

student

Area Name of topic

A.M.Andhare Heat Transfer Experimental Investigation and Thermal Performance

Analysis of a Helical Coil Heat Exchanger.

P.K.Katare Compressors,

Refrigeration

Concept Development, Experimental Investigation of

Conical Compressor and Performance Analysis of

Vapour Compression Refrigeration System using

different Refrigerants.

Vijay W.Bhatkar Refrigeration Design, Development and Performance evaluation of

Vapor Compression refrigeration system with and

without micro channel condenser using alternative

refrigerants.

V.W.Khond IC Engines Experimental investigation of nanofluid

additives on performance and emission

characteristics of water emulsified biodiesel

fuelled stationary CI engine

M.Tech Project guided:

Area Name of topic

Heat Transfer

Experimental Investigation on buoyancy induced flow in squire ducts

Experimental Investigation and performance analysis of finned tube Heat

Exchanger

Cryogenics Design and Development of Cryogenic grinding system for species

Refrigeration Design of Central Air-conditioning system for Theatre

Experimental Analysis of Natural Convection Heat Transfer from

horizontal plate in a vertical channel

Experimental investigation of natural convection heat transfer from a

cylinder with high conductivity permeable fins

Experimental Investigation and Performance Analysis of hole shaped Ribs

in a Channel


Heat Transfer

Internal Cooling Augmentation using Inclined Perforated Baffles in

Rectangular Channel

Expermental Invetigation of Heat Transfer Characeristics in Rectangular

Channel with Inclined Perforated Baffles

Experimental Study of Heat Transfer in Parallel Flow Concentric Tube

Heat Exchanger using Inner Twisted Tape and Annular Insert

Experimental Study and Analysis of Heat Transfer rate by using Lateral

Perforated Fins in a Rectangular Channel

Experimental Study of Heat Transfer in Parallel Flow Concentric Tube

Heat Exchanger using Inner Twisted Tape and Annular Insert

Experimental heat transfer analysis of pin fin for different

geometrical shapes with and without metallic foam inserts

Heat transfer enhancement in rectangular duct with Z-shaped ribs

Experimental analysis of the effect of different inlet conditions of air

in a rectangular channel on forced convection heat transfer

Heat transfer enhancement by using twisted tube in heat-exchanger


International Scientific Journal - Thermal Sciences, published by Institute of Nuclear Sciences, Belgrade,

Serbia

International conferences ICETET- 10



Session chaired for International Conference :

International conference, ICETET- 09

International conference, ICETET- 08


Name : Dr. S. B. Jaju

Qualification : M.Tech, Ph.D, MBA

Area of Specialization /Research : Industrial Engg., Quality cost, CNC

& Robotics, Modeling & Simulation

Total Experience : 16 Years


Book chapter : 02





Mr. Santosh Shukla Quality

Engineering

A model for Evaluation of Critical Success

Factors for Implementing Quality

Engineering Tools and Techniques in

Indian Industries

Mr. Nitin Mandavgade Measurement

Uncertainty

Impact of various factors on Measurement

of Uncertainty

Mr. Ganesh Akhade Service Quality Model for assessing service Quality in

health care sector using Neural

Network

Mr. Vijay Kale Cost of Quality Evaluation of Various Parameters

Responsible for Cost of Quality in

Rubber Processing Industry

Mr. Pranav Charkha Supply Chain

Management

Supply Chain Management Practices in

Indian Textile Industry: Performance

Measurement Perspective

Mr. Chetan Temburkar Design Design, development and validation of

methodologies for testing of wooden

furniture

Mr. Sanjay Mantri Quality Cost Modeling of Quality Cost Management

System For Medium Sized Enterprises

working in Advanced Manufacturing

Environment

Ms. Vijayshri Mahobia Lean

Manufacturing

Development of Lean Manufacturing

Model for Performance Improvement

of Testing Laboratories


Area Name of topic

Modeling &

Analysis

Modeling & Analysis of Connecting Rod of Four Stroke Single Cylinder

Engine for Optimization of Cost & Material


Robotics Design and Analysis of wheeled platform with steering mechanism for

hybrid mobile Robot

Fatigue Analysis Fatigue analysis of Fibre-Reinforced Polymer (FRP) Leaf Spring

Modeling &

Simulation

Modeling and Simulation of Tractor’s trolley axel using Finite Element

Analysis

Fatigue Analysis Fatigue Analysis of NEF Exhaust Manifold Stud of Mahindra Tractor

9Arjun Model) Part No. 000021606E09 through Finite Element

Method (ANSYS)

Failure Analysis Root cause analysis of Bridle Roll shaft failure at continuous process

industry

Robotics Development of Gripping Mechanism for a Prosthetic hand

Measurement

Uncertainty

Modeling Measurement Uncertainty in Testing Equipments using

Fuzzy AHP Approach

FEM FEM analysis of the Stress Distribution of The Zirconia Dental

Implant

FEM FEM analysis of Mandibular Overdenture Implant for the Bio-

mechanical Advantage

Robotics Designing and Development of two finger compound gripper for

Internal and external gripping


Rapportire in International Conference on Quality Management Practices (ICQMP’06) held at Mumbai during

Aug 16-17, 2006.

Reviewer International Conference on Emerging Trends in Engineering and Technology (ICETET

2008,2009,2010)

Reviewer: International Journal of Six Sigma and Competitive Advantage (IJSSCA) Inderscience

Publisher, UK.

Session chaired for International Conferences:

Session Chair for Track CAD/CAM/CAE in International Conference on Emerging Trends in Engineering and

Technology (ICETET 2009) held during 16-18 December 2009 at Nagpur.

Technical Session Chair for Track Applied Computing in Mechanical Engineering, on 1st

Feb 2012

during International Conference on Innovations and Trends in Applied Computing 2012, 1-3 Feb 2012.


Name : Dr. D. J. TIDKE

Highest Qualifications : Ph.D. (IITB)

Area of Specialization /Research : Manufacturing Engg


Industrial Experiences : 1 year






Nilesh p. Awate Mechanical Engg Design and Development of a Mobile Crop Residue

Disintegrator

Piyush P. Pande Mechanical Engg Vibration Signal Analysis and Fault Identification in

Bearings Using Wavelet Transforms

Anant G. Thakare Mechanical Engg Data Dependent Modeling and Analysis of Rejections in

Duplex Mould Casting

M.Tech Projects (on-going):

Area Name of topic

Mechanical Engg Weight Reduction of Gearbox Casting Using CAD

Mechanical Engg Designing and Development of Magnetic Wall Climbing Device in Power

Station

Mechanical Engg System Improvement Using ERP for Cable Manufacturing Industry

Mechanical Engg Design and Analysis of Casting of Coke Oven Flash Plate Using CAD

Computer Sc &

Engg

Hybrid GMDH Model for Handwritten Character Recognition


International Journal of Computer Aided Engineering and Technology

Session chaired for International Conferences :

International Conference on Emerging Trends in Engg & Tech, GHRCE, Nagpur – 2009

9th International Symposium on Measurement and Quality Control, IIT Chennai – 2007


International Conference on ‘Innovations and Trends in Applied Computing’ (ITAC-2012) organized by

YCCE, Nagpur on 1st, 2nd and 3rd February, 2012 in collaboration with University of Hartford.

Awards and recognitions:

Best Research Paper Award - National Conference on Electroplating & Metal Finishing – 1983

Baroda Chapter Best Paper Award for publication in ISTE Journal – 1989

Best Teacher Award of Govt. of Maharashtra – 1998

Bhartiya Shiksha Ratna Puraskar, NEHRDO – 2007


Name : Dr. U. S. Wankhede

Qualification : M.Tech. (HPE), Ph.D.

Area of Specialization/Research :Refrigeration and Air Conditioning,

Heat transfer, Multiphase flows

Total Experience :17 years

Industrial Experiences :06 months



Conferences (National & International): 11- International

14- National


Area Name of topic

Multiphase flow Mathematical modeling and analysis of heat transfer in fluidized beds

Unconventional

energy sourses

Mathematical modeling and analysis of solar refrigeration system

Heat transfer Heat transfer in bubbling fluidized beds

Refrigeration and

Air Conditioning

An experimental study on process design for adsorption desiccant cooling

driven out with low temperature heat

Heat transfer Experimental investigation for natural convection heat transfer

enhancements from a cylinder using porous carbon foam

Refrigeration and

Air Conditioning

Experimental analysis of air conditioning system with additional condenser

Refrigeration and

Air Conditioning

Experimental analysis for selection of the capillary tubes in refrigeration

appliances

Heat transfer Experimental analysis of free cooling through heat pipe by using phase

change material.

Heat transfer Performance analysis of aluminum foams for heat transfer augmentation

Heat transfer Experimental analysis of flow and heat transfer behavior in tube banks with

wake splitter

Refrigeration and

Air Conditioning

Experimental analysis for selection of spiral capillary tube for refrigeration

appliances

Refrigeration and

Air Conditioning

Experimental analysis of vapour compression refrigeration system with

diffuser at condenser inlet

Refrigeration and

Air Conditioning

Experimental analysis to check suitability of hydrocarbon and other blends

as refrigerant in refrigeration appliances

Multiphase flow Experimental analysis of rectangular fluidized bed dryer with triangular

wavy walls

Refrigeration and

Air Conditioning

Capillary pumped loop system for high heat flux microelectronics cooling.


Patent applications (National) filed

Air conditioning system with additional condenser, Application No. 2186/MUM/2012, dated 31/07/2012.


Journal of Mechanical Engineering Research (Academic Journals)

Editorial board for International Journal of Emerging Trends in Engineering and Technology.

Technical Expert for National Conference on ‘Advances in Engineering and Technology (NCAET-2012)

on 13th

March, 2012 at Anjuman College of Engineering,Nagpur.

International Conference “Emerging trends in Engineering and Technology (ICETET-08)” from 16-18 July, 2008

at G. H. Raisoni College of Engineering, Nagpur.

International Conference “Emerging trends in Engineering and Technology (ICETET-09)” from 16-18 December,

2009 at G. H. Raisoni College of Engineering, Nagpur

Raisoni group of Institution Technical/Research paper competition for students (RGI-TRPCS-2009) on 11

February 2009.

International Conference “Emerging trends in Engineering and Technology (ICETET-10)” from 19-21 November,

2010 at BITS Pilani, K.K.Birla Goa Campus, Goa.


International Conference “Emerging trends in Engineering and Technology (ICETET-10)” from 19-21 November,

2010 at BITS Pilani, K.K.Birla Goa Campus, Goa.

Grants received from AICTE under RPS and IEDC

1. Received research grant of Rs. 8.8 Lakhs from AICTE for “Heat transfer in a sound assisted fluidized bed” in

2008-09 under Research Promotion Scheme

2. Received grant of Rs. 1 Lakh for UG project under IEDC (Innovative Entrepreneurship Development Cell) from

AICTE for topic “Design and fabrication of multiutility refrigeration system” in 2009-10


Name : Dr.(Mrs.) Rashmi Nitin Baxi

Qualification : M.Tech., Ph.D

Area of Specialization /Research : Materials Engineering

Total Experiences : 16 yrs.

Industrial Experiences : 10 months





Area Name of topic

Foundry Engineering Investigation Of Critial Casting Component For Quality

Enhacement

Industrial Material

Handling

Design & Development Of Automatic Material Handling

System Between CNC Lathe & CNC Milling Machine.


2008, Journal of Applied Polymer Science, Wiley Publication

2010, Polymer Engineering and Science, Wiley Publication

2011 and 2012 Polymer Composites, Wiley Publication


Life Member ISTE: LM-29867

Institution of Engineers (India): A/50896313

Life Member Institute of Metals: LM NO1-LM11- 4037


Name : Dr. Vinod N. Bhaiswar

Qualification: M. Tech. (Mechanisms & Machine Design), Ph.D.

Experience: 21 Years

Details of Published and Research Papers Presented: - 19

Membership of Professional Societies: 03

Projects guided at PG Level : 12

Projects guided at UG Level : 10

Short-term training courses attended: 04

Any other information: Involved in sponsored research project of WCL


Name : Dr. P B NAGARNAIK

Qualification : Ph.D. (Civil Engg),

M.Tech. (Environmental Engg.)

Area of Specialization /Research : Water and Wastewater Treatment

Total Experience : 28 Years




Ph.D students Awarded/Registered: 10


V M Mohitkar Interdisciplinary Development of Quality Assurance Mechanism for

Engineering Education System.

D K Parbat Traffic Engg. Assessment and Modeling of Noise Levels due to Traffic

Flow.

P V Durge Environmental

Engineering

Study and Design of New Concept in Tapered Flocculation

P D Jadhav Geotechnical

Engineering

Behavior of Cement Stabilized Fiber Reinforced Soil Fly

ash Mixtures in Road Construction.

N V Raut Structural Engg. Innovative Methods for Retrofitting of Buildings.

P Y Pawade Structural Engg. Critical studies on the influence of Silica Fume and Steel

Fiber in Enhancing Properties of Concrete

P P Dahale Geotechnical

Engineering

Soil Stabilisation Using Lime in Combination with

Different Solid Waste Materials

R N Nibudey Structural Engg. Feasibility Analysis of Use of Waste Plastics in Concrete.

D M Bhonde Structural Engg. Feasibility Study and Analysis of the Use of Bamboo

Reinforcement in Concrete Structural Members.

Bahuriya Structural Engg. Feasibility Study of Replacement of Natural Sand by

Quarry Dust and Waste Plastic in Concrete.


Area Name of topic

Environmental

Engineering

Evaluation of process kinetic by anaerobic dissector for oil refinery

waste water

Quantification of impact and Environmental management plan for the

proposed cock oven plant, at Siltara, Raipur.


Performance Evaluation of Water Treatment plant Pench Phase – II,

Gorewada, Nagpur

Performance Evaluation of Effluent Treatment plant for Dairy & Ice-

cream industry.

Reviewer for International journal / conference:

International Journals Of Environmental Pollution

The conferences and journals of WESAS working group on energy , environment, ecosystems and

sustainable development

International conference ICETET 08,09.10 at GHRCE, NAGPUR


International conference ICETET 09 at GHRCE, NAGPUR

International conference ICETET 10 at BITs Goa.


Name : Dr. Bhalchandra V. Khode

Highest Qualifications : M.Tech ,Ph.D.

Area of Specialization /Research : Hydraulic & Water Resource


Industrial Experiences : 2 years





Indian Society of Technical Education-M.I.S.T.E.

Indian Society of Hydraulic Engineering-M.I.S.H

Indian Society of Wind Engineering-M.I.S.W.E.

Indian water works Association-I.W.W.A.

Name : Dr. Prashant Y.Pawade

Highest Qualifications : M.Tech (Structural Engineering),

Ph.D.

Area of Specialization /Research : Structural Engineering


Industrial Experiences : 1 years





Indian Society of Technical Education.(ISTE)

Indian Concrete Institute (ICI)

American Concrete Institute (ACI)


Name : Dr. S. G. Tarnekar

Highest Qualifications : Ph.D.

Area of Specialization /Research : Electrical Drives / Energy Systems

Total Experience : 44 years in Academics

Industrial Experiences : 1.5 years






Mrs. M V Palandurkar Applications of

control of modern

Drives

Elimination of Flywheels for Process

Machines using modern drives

Mr. Kishor Bante Electric Drives Up-rating a Drive by improving the

cooling-system monitoring.

M.Tech Projects:

Area Name of topic

Flywheels Inverter frequency control for replacing the flywheels:

A simulation study

Modern Energy

storage systems

Calculations for grid- support during Peak-load hours using Modern Energy

storage systems


International Journal Power Electronics


ICETET 2009 at GHRCE, Nagpur


Name : Dr..P. M. Daigavane

Designation : Professor

Total Experience in years : Teaching : 25 yr.

Papers Published : National : 12, International: 12

Papers Presented in Conference : National : 5 International:2

Ph.D.s / Projects Guided : Ph.D.(03)-In process, M. Tech.(03)-In

process

Professional Memberships : LMISTE,MIE,IEEE


Name : Dr. Latesh Malik

Qualification : Ph.D. (Computer Science)

Area of Specialization /Research : Document Processing,

Pattern Recognition,

Image Processing and Intelligent Tutoring

Systems.

Total experience : 15 years.



Conferences (National & International) : 34-international

6- National



Area Name of topic

Neural network Speaker Identification through telephone line using neural network

Wavelet-Based Reversible watermarking for Authentication

Character Recognition Online handwritten Devnagri Character Recognition system using Fourier descriptor

method

Content based Image Retrieval using texture feature and relevance feedback

Character Recognition Cursive handwriting recognition

Character Recognition Recognition of Printed Devanagri word

Grid Computing Fault Tolerant Grid Computing System

Artificial intelligence Artificial intelligence based threat sensing and prevention Engine

Word wise handwritten script identification for Indian postal automation.

Character Recognition Devnagari Spell Checker

Hindi Summarizer

Character Recognition Skew Detection and Correction in Handwritten Devnagari Document

Character Recognition Segmentation of handwritten Devnagari Word

Hindi Morphological Analyzer

Number of Reviewer of papers: 17

International Committee Member: 14

Number of Funded Projects from AICTE: 02


Name : Dr. Urmila Shrawankar

Qualification : M.Tech. (CSE), Ph.D.

Area of Specialization /Research : Advance Operating System,

Human Computer Interaction, Algorithms

Speech Recognition System,

Cloud Computing

Total Experiences : 15 yrs


Book : 02



04- National


Area Name of Topic

Digital Image Processing Facial Expression Recognition System

Speech Recognition Speech Packet Concealment Over IP

Digital Image Processing Research on DNA matching and Classification

Digital Image Processing Image Optimization and prediction

Ad-hoc network Vanet Vehicular Ad-hoc network

Genetic Algorithm Modified Genetic Algorithm With Species and Sexual Selection by using

K-means Algorithm

Network Intrusion

Detection

A detective approach for denial of service attacks

Speech Recognition Recognition of Hindi Speech

Speech Recognition Speech Intelligibility Improvement for Effective Learning in a Noisy

Environment

Speech Recognition Evaluation and Reconstruction of Missing Data for Automatic Speech

Recognition in Noisy Conditions

Wireless Mesh Network Performance Measures Of Fast Retransmission and Recovery Algorithm To

Improve TCP Over Multi-Hop Wireless Mesh Network

Wireless Mesh Network Interference-Aware Channel Re-Assignment Using Clustered Wireless

Mesh Network

Web Technology Text Categorization and Text Summarization for Topic Tracking

Reviewer / Technical Program Committee Member International Journals

WSEAS Transactions on Signal Processing, USA

Journal of Electrical and Computer Engineering, Hindawi Pub. Corp, USA,

International Journal of Educational Research, ELSEVIER

International Journal of Computer Science and Information Technologies (IJCSIT)

International journal of Network Security & Its Applications (IJNSA)

Science Journal

Journal of Electrical and Electronic Engineering Research, Academic Journal Pub.

Journals of Academy & Industry Research Collaboration Centre


Reviewer / Technical Program Committee Member for International / National Conferences

WeST-2013 : The Fifth International Conference on Web & Semantic Technology, July 13 -15, 2013.

Chennai, India.

DPPR-2013 : Third International Conference on Digital Image Processing and Pattern Recognition, Chennai,

India

CoNeCo-2013 : Fifth International Conference on Computer Networks & Communications, Konya, Turkey

WIMON-2013 Fifth International Conference on Wireless and Mobile Networks, India

CCSIT-2013 : Third International conference on Computer Science and Information Technology, Bangalore,

India

NCRTIS-2013, National Conference on Recent Trends on Information Security, India

NCIPET-2013, National Conference on Innovative Paradism in Engineering & Technology, India

IEEE-ICCIC 2012 : IEEE International Conference on Computational Intelligence and Computing Research,

Coimbatore, India

IEEE SPCOM 2012 : International Conference On Signal Processing And Communications, IISc, Bangalore,

India

ICEOE 2012 : 2nd International Conference on Electronics and Optoelectronics , China

NCIPET-2012, National Conference on Innovative Paradigm in Engineering & Technology India

NCIRTCSET-2012, India

Professional Bodies Membership

IEEE

ACM

CSI

IST

IE


Faculty Profile: ME by Research

Name : Prafull Janardanrao Wadhai

Qualification : M.Tech. (Hydraulics), Pursuing Ph.D. (Civil.)

Area of Specialization /Research : Advance Operating System,

Human Computer Interaction, Algorithms

Speech Recognition System,

Cloud Computing

Work Experience : 22 Years

Teaching: 21 Years

Industrial / Professional : 1 Year

Number of Publications :13



10- National


Professional Societies Affiliation :

M.I.S.T.E. : Member of Indian Society for Technical Education.

M.I.S.W.E. : Member of Indian Society for Wind Engineering.

M.I.S.H. : Member of Indian Society for Hydraulics.

M.I.W.W.A. : Member of Indian Water Works Association.

Teaching Award :

Honored by Best Teacher Award for the Session 2005 – 2006.

Honored by Appreciation for Outstanding Contribution for Overall Development of the Institute for the Session

2010 – 2011.


Name : Ms. Sharda .A. Chhabria

Qualification : M.Tech. (CSE)

Total Experiences : 13 yrs



Conferences (National & International) : 15-international

06- National



As Reviewer in the Journals

Reviewer of IEEE System Journal

Reviewer of International Journal of Engineering, Sciences & Management (ISSN 2231- 3273) in Vol-

III, Issue-I of Jan-June 2013.

As Reviewer in the Conferences

ICETET 08, ICETET 09, ICETET 10,ICETET 11 organized by GHRCE Nagpur

Reviewer of NCEACM 2012 organized by SYSS NAGPUR

Convener of National Conference on Advance Database Management & Multimedia Computing

organized by IT Department GHRCE

Name : Ms. Rupesh S.Shelke

Qualification : M.Tech. (HPE), Pursuing Ph.D. (Solar energy.)

Area of Specialization /Research : Heat Transfer,

Solar energy

Total Experience : 14 yrs



Conferences (National & International): 10 -international

04- National


Area Name of Topic

Heat transfer Performance analysis of heat exchanger for automobile application-

Thermal Engg Capacity enhancement of galvanized furnace at KEC international,

Nagpur

Thermal Engg Boiler tube failure-a case study at KTPS, Nagpur

Solar energy Development and testing of TiO2solar cell

Solar energy Water purification system for remote villages utilizing ultraviolet

sterilization & photovoltaic

Heat transfer Experimental investigation of mixed convection heat transfer in an


inclined circular ducts

Solar energy Comparative performance and analysis of ISI flat plate collector with

modified flat plate collector, experimentation and numerical

approach-

Heat transfer Experimental investigation of heat transfer characteristics of high-

pressure gas in an augmented heat exchanger

Heat transfer Performance evaluation of heat pipes in comparison to conventional

water jackets in mould cooling

Solar energy Experimental analysis of flat plate collector using optical lens

concentrator array

Heat transfer Solid to gas/liquid heat exchanger based on adsorption technique

Heat transfer Experimental analysis of heat transfer enhancement by using porous

baffles in a duct

Reviewer / Technical Program Committee Member International Journals

ICETET 2008,2009,2010

Professional Bodies Membership

ISTE

IE

Solar Energy Society of India (SESI)

Institute of combustion.

Admission to DOCTORAL (Ph. D) & M.E. BY RESEARCH … PhD 2014-15 28 12 14.pdfGHRCE/R&D/Ph.D/Form-1...

Documents

Transcript of Admission to DOCTORAL (Ph. D) & M.E. BY RESEARCH … PhD 2014-15 28 12 14.pdfGHRCE/R&D/Ph.D/Form-1...