Natural Gas Solutions

www.aetherdbs.com(877) 637-9470

sales@aetherdbs.com

Gas Metering & Measurement Skids Gas Blenders Inlet Separators & Scrubbers Flash / Drains Tanks PIG Receiver Skids

Dew Point Heaters (gas & electric) Heat Exchangers Coalescing Filtration Packages Weatherproof Enclosures for Equipment Protection

CRNPED

pending

Additional Natural Gas Equipment Packages

Certifications

AQUA-GAS® Natural Gas Line Heaters

The Aether DBS AQUA-GAS® NG Series provides safe heating to natural gas supplies to:

Prevent the formation of ice during pressure changes (Joule-Thompson effect) Maintain process temperatures in upstream and downstream distribution systems Protect against internal and external freezing in lines and equipment

DESIGN - Horizontal or Vertical Configurations

Skid-mounted and flange in - out design Natural gas exchanger coils are designed, manufactured and stamped per ASME Section VII, Division I Electrical design will be per NEC, Class 1, Division 2, & Group D within 15 ft of the process inlet and outlet of the Heater AssemblyCOMMON OPTIONS AVAILABLE: Fully Insulated Maintenance House/Enclosure for extreme weather environments Removable Coils/Exchanger Solar Panel with DC Power Igniter for remote installation Water Glycol and Oil Bath available Forced Draft and Natural Draft available

Fuel Gas Conditioning Skids

Electric Dew Point Heaters (gas & electric) Inline Gas Coalescing Filters to Remove Solids and Particulates from the Gas Stream Filter Separators / Coalescers: Typically 98% to 99.99% of Micron ratings of 10, 5, 1, 0.5 and 0.3 liquid and solid contaminants are available Insulation and Tracing Access Platforms PLC Controls

For Gas Conditioning Systems. Aether DBS can supply Scrubbers, Heaters, Metering, Regulating and Coalescing Filters on a common Skid Structure to reduce onsite interconnection work.

Common Options Include:

Found at natural gas compressor stations, gathering stations, processing facilities and separating facilities, Aether DBS’ Flow Monitoring and Pressure Regulation Skids give you the capability to fully control pressure and meter the flow of natural gas. Aether DBS designs and manufactures custom regulation skids per clients’ requirements for flow and pressure. The skids are easy to install and can be configured to provide flow metering and remote logging, as well as remote pressure regulation and controls - in many cases integrated with an existing DCS or PLC.

Custody Transfer Meters Working-Monitor Regulation Configuration for Redundancy Skid installed in Heated and Air Conditioned Enclosures for extreme temperature environments

Common Options Include:

Flow Monitoring Regulating StationsNatural Gas Scrubber Skids / Knockout Systems

Typically used for removing large slugs of liquid from pipelines.

Knockout Drum / Scrubber / Slug Catcher: 10 Micron Liquid Removal and Larger ASME Code Stamped Vessels Completely Assembled on Skid Base including Piping, Valves, Instruments and Wiring

Common Options Include:

AQUA-GAS® Natural Gas Line Heaters

The Aether DBS AQUA-GAS® NG Series provides safe heating to natural gas supplies to:

Prevent the formation of ice during pressure changes (Joule-Thompson effect) Maintain process temperatures in upstream and downstream distribution systems Protect against internal and external freezing in lines and equipment

DESIGN - Horizontal or Vertical Configurations

Skid-mounted and flange in - out design Natural gas exchanger coils are designed, manufactured and stamped per ASME Section VII, Division I Electrical design will be per NEC, Class 1, Division 2, & Group D within 15 ft of the process inlet and outlet of the Heater AssemblyCOMMON OPTIONS AVAILABLE: Fully Insulated Maintenance House/Enclosure for extreme weather environments Removable Coils/Exchanger Solar Panel with DC Power Igniter for remote installation Water Glycol and Oil Bath available Forced Draft and Natural Draft available

Fuel Gas Conditioning Skids

Electric Dew Point Heaters (gas & electric) Inline Gas Coalescing Filters to Remove Solids and Particulates from the Gas Stream Filter Separators / Coalescers: Typically 98% to 99.99% of Micron ratings of 10, 5, 1, 0.5 and 0.3 liquid and solid contaminants are available Insulation and Tracing Access Platforms PLC Controls

For Gas Conditioning Systems. Aether DBS can supply Scrubbers, Heaters, Metering, Regulating and Coalescing Filters on a common Skid Structure to reduce onsite interconnection work.

Common Options Include:

Found at natural gas compressor stations, gathering stations, processing facilities and separating facilities, Aether DBS’ Flow Monitoring and Pressure Regulation Skids give you the capability to fully control pressure and meter the flow of natural gas. Aether DBS designs and manufactures custom regulation skids per clients’ requirements for flow and pressure. The skids are easy to install and can be configured to provide flow metering and remote logging, as well as remote pressure regulation and controls - in many cases integrated with an existing DCS or PLC.

Custody Transfer Meters Working-Monitor Regulation Configuration for Redundancy Skid installed in Heated and Air Conditioned Enclosures for extreme temperature environments

Common Options Include:

Flow Monitoring Regulating StationsNatural Gas Scrubber Skids / Knockout Systems

Typically used for removing large slugs of liquid from pipelines.

Knockout Drum / Scrubber / Slug Catcher: 10 Micron Liquid Removal and Larger ASME Code Stamped Vessels Completely Assembled on Skid Base including Piping, Valves, Instruments and Wiring

Common Options Include:

Natural Gas Solutions

www.aetherdbs.com(877) 637-9470

sales@aetherdbs.com

Gas Metering & MeasurementSkids

Gas Blenders Inlet Separators & Scrubbers Flash / Drains Tanks PIG Receiver Skids

Dew Point Heaters (gas & electric) Heat Exchangers Coalescing Filtration Packages Weatherproof Enclosures for

Equipment Protection

CRNPED

pending

Additional Natural Gas Equipment Packages

Certifications

ASMEU, UM, R, S