8/14/2019 Add924F.tmp.rtf

1/3

Add a device or computer to a wireless networkusing a USBflash drive

The way you add a device or computer to your network depends on the type ofnetwork adapter and the version of Windows your computer is running. Follow theinstructions below for each type of computer or device that you want to add to yournetwork.

Your network has the following settings:

Network name: RO!"#$$Network security key%passphrase: &'&(&&&)&*

To add a wireless computer running Windows 7 or Windows Vista

*. og on to the computer.). +lug the "#, flash drive into a "#, port on the computer.

&. -n the Autola!dialog bo that appears/ click Wireless "etwork SetupWi#ard. The wi0ard will use the settings saved on the "#, flash drive andautomatically connect the computer to the network.

1ou will get a confirmation when you are connected to the network.(. To verify that you have added the computer successfully:

-n Windows 2/ click the Start button/ click your user name/ and then click

"etwork.

-n Windows 3ista/ click the Startbutton/ and then click "etwork.

1ou should be able to see icons for the computer you added and for the othercomputers and devices on the network.

To add a wireless computer running Windows $

*. og on to the computer.). +lug the "#, flash drive into a "#, port on the computer.&. -n the "#, flash drive dialog bo that appears/ double4click Wireless "etwork

Setup Wi#ard. The wi0ard will use the settings saved on the "#, flash drive andautomatically connect the computer to the network.

1ou will be prompted to restart the computer.(. 5fter you restart/ click the Start button/ click %! "etwork laces& and then

click Workgroup. 1ou should be able to see the other computers on yournetwork.

To add a wireless device

*. Turnon the device.). +lug the "#, flash drive into a "#, port on the device.&. Followthe instructions that came with the device for adding the device to a

network.(. Whenyouare finished adding the device/ log on to a network computer.'. To verify thatyou have added the device successfully:

8/14/2019 Add924F.tmp.rtf

2/3

-n Windows 2/ click the Start button/ click your user name/ and then click

"etwork.

-n Windows 3ista/ click the Startbutton/ and then click "etwork.

-n Windows 6+/ click the Start button/ click %! "etwork laces& and then

click Workgroup.

1ou should be able to see an icon for the device. -f the device is a printer/ youmight need to enable printer sharing so other computers on the network can usethe printer.

To add a wired computer running Windows 7 or Windows Vista

*. +lug the computer into the router or access point/ and then turn it on.). og on to the computer.&. To verify that you have added the device successfully:

-n Windows 2/ click the Start button/ click your user name/ and then click

"etwork.

-n Windows 3ista/ click the Startbutton/ and then click "etwork.

1ou should be able to see icons for the computer you added and for the othercomputers and devices on the network. -f a printer is attached to this computer/ itmight not be visible to other computers until you enable printer sharing.

To add a wired computer running Windows $

*. +lug the computer into the router or access point/ and then turn it on.). og on to the computer.&. +lug the "#, flash drive into a "#, port on the computer.(. -n the "#, flash drive dialog bo that appears/ double4click Wireless "etwork

Setup Wi#ard. The wi0ard will use the settings saved on the "#, flash drive andautomatically connect the computer to the network.

1ou will be prompted to restart the computer.'. 5fter you restart/ click the Start button/ click %! "etwork laces& and then

click Workgroup. 1ou should be able to see the other computers on yournetwork.

To add a wired device

Turn on the device and plug it into the router or access point or into a computerthat7s plugged into the router. This should automatically connect your device tothe network.

To verify that you added the device successfully/ follow these steps:

*. og on to a computer that is part of the network/ or the computer that the deviceis attached to.

). To verify that you have added the device successfully:

-n Windows 2/ click the Start button/ click your user name/ and then click

"etwork.

-n Windows 3ista/ click the Startbutton/ and then click "etwork.

8/14/2019 Add924F.tmp.rtf

3/3

-n Windows 6+/ click the Start button/ click %! "etwork laces& and then

click Workgroup.

1ou should be able to see an icon for the device. -f the device is a printer/ youmight need to enable printer sharing so other computers on the network can useit.