Adapting a Consumer Payment Program to Fit Commercial Customer Requirements
Adapting Press-Fit Connection Technology for Electronic ...
Transcript of Adapting Press-Fit Connection Technology for Electronic ...
![Page 1: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/1.jpg)
By
Joseph Lynch – Director of Advanced Product Engineering
– Interplex Industries Inc, USA.
Andy Longford – Consultant – PandA Europe, UK
& Business Development - Interplex Engineered Products
Adapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments.
HiTEN 2009 - Oxford
![Page 2: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/2.jpg)
Introduction
Interplex
Press-fit basics
Connections in HE
Testing
Approvals
Module development
Applications
HiTEN 2009 - Oxford
![Page 3: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/3.jpg)
Function of Press-Fit Technology
Telecom to Automotive Adoption
Core design types
- 0.25mm, 0.64mm, 0.80mm
Plating Types, & options
Applications
Press fit basics ...
HiTEN 2009 - Oxford
![Page 4: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/4.jpg)
Press fit technology ...
HiTEN 2009 - Oxford
Interconnection Force
*Grams *Interconnection Force
* Kilograms *
Solder Less Interconnect System to Printed Circuit Cards
![Page 5: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/5.jpg)
Press fit connections …….
HiTEN 2009 - Oxford
Require:
• Complex Plastics---------------------------------------
• Press fit Terminals
• IDC
• Eyelet
• Tuning Fork
• Clamp
• PCB Hole Construction Controls-------
•Application Knowledge
EYE OF THE NEEDLE
![Page 6: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/6.jpg)
Automotive
Temp to 150 °C
Vibration- 12G-three Axis( In Temp)
Retention -20N to 40N
Rework - no
Plating- 0.4 to 1.2 Microns
Contact Resistance- 0.5mΩ Max
Telecom
Temp to 85 °C
Vibration –None
Retention Force- 8N
Rework –Yes
Plating-2 to3 Microns
Contact Resistance- 4.0mΩ Max
Telecom to Automotive
HiTEN 2009 - Oxford
![Page 7: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/7.jpg)
Complex Press fit Stampings
Complex Plastic holders
Press fit connections ...
HiTEN 2009 - Oxford
![Page 8: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/8.jpg)
Mechanical Requirements- Kilograms
Temperature Requirements vs. Material Selections
- ( 125°C, 150°C, @ 175 °C)
Electrical requirements
- Milliohm resistance (0.5MΩ)
- Typical current requirements
- per eye & thickness
- Per Application Size
Application requirements
- Energy
- Transport
Testing requirements
- resulting example data will shown in the Testing
PCB Constructions and Types
- Hole size, plating PCB copper
Applications Failure Modes- ( Printed Circuit Card )
Harsh Environment interconnections ...
HiTEN 2009 - Oxford
Inverters
Capacitor Holders
![Page 9: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/9.jpg)
• Solderless Technology design to meet the Automotive/
Transportation Requirements
• Qualified to 125° C and 150° C Operational temperatures and moving to 175° C
• Requirements defined by IEC, EIA and SAE.
• Designs validated for both 0.64mm and 0.80mm thick press-fit sections - Other
sizes being Introduced ( .4mm,1.0mm,1.5mm)
• High conductive material options - Power Applications 30%,40% & 80% IACS
• Compatible with Various PCB Plating Types
Press-Fit Style- Eye of the needle
0.64m Thick 0.80m Thick
HE interconnections
HiTEN 2009 - Oxford
![Page 10: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/10.jpg)
• . PCB hole sizes:
• 0.64mm & 0.80mm press-fit to fit into
(Nominal) 1.016mm and 1.486mm respectively.
•PCB Types :
• Tg > 150 º C
• Plated Through Holes (PTH)- Single & Multilayer
• PCB Platings: Tin, Silver, Gold, OSP
• PCB Construction FR-4 1.57mm thick & up
•Terminal Plating: 1 Micron-Tin plating in Press-Fit Zone
HE interconnections
HiTEN 2009 - Oxford
![Page 11: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/11.jpg)
.64mm Thick:
•125 °C Primary Alloy: CuSn5 15% IACS
•150 °C alloy : 7025 CuNiSi- 40% IACS
• Conductive Alloy: Special Brass:(CuZnSnNiFeP) 30%
IACS
.80mm Thick:
• 125 °C Primary Alloy: Special Brass:(CuZnSnNiFeP)
30% IACS
• 150 °C alloy : 7025 CuNiSi – 40% IACS
• Conductive Alloy:(CuCrAgFeTiSi) 80% IACS
Primary Drivers for Materials & Options: Temperature Conductivity Bend Radius
0.64mm Thick
0.8mm Thick
HE interconnections
HiTEN 2009 - Oxford
![Page 12: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/12.jpg)
Tests criteria
Test sequence & requirements
Data and results
Testing ....
HiTEN 2009 - Oxford
![Page 13: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/13.jpg)
Insertion force and retention force
Vibration in Temperature
Thermal shock
High temperature exposure
Temperature and humidity cycling
Mixed flowing 4 Gas test
Current carrying capacity
Plated through hole integrity
Test Criteria
HiTEN 2009 - Oxford
0.0
20.0
40.0
60.0
80.0
100.0
120.0
140.0
160.0
180.0
200.0
0.0
00
0.0
42
0.0
83
0.1
25
0.1
67
0.2
08
0.2
50
0.2
92
0.3
33
0.3
75
0.4
17
0.4
58
0.5
00
0.5
42
0.5
83
0.6
25
0.6
67
0.7
08
0.7
50
0.7
92
0.8
33
0.8
75
0.9
17
0.9
58
1.0
00
1.0
42
1.0
83
1.1
25
1.1
67
1.2
08
1.2
50
Forc
e (
N)
Distance (mm)
Press-in 0.8 PF in Ø1.35 PTH
Push-out 0.8 PF in Ø1.35 PTH
![Page 14: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/14.jpg)
Test Sequence & Requirements
HiTEN 2009 - Oxford
•Contact Resistance.5mΩ Max
•20N retention for .64mm
•60N retention for .80mm
•IEC–60352-5 Plated Through Hole Integrity
•No Visual Damage
![Page 15: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/15.jpg)
OEM Automotive Temperature classes
Temperature class Temperature range
Tlo Tup
1 -40 °C +105 °C
2 -40 °C +125 °C
3 -40 °C +150 °C
4 -40 °C +175 °C
• Materials and testing up to 150 °C
• Testing Continuing to 175 °C
• Random Vibration in Temperature- For Chassis mount
Cabin Underhood Near Engine On Engine
Thermal requirements
HiTEN 2009 - Oxford
![Page 16: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/16.jpg)
Summary of Interplex 0.64mm Press-Fit
IF/RF Testing –Sn PCB’s
HiTEN 2009 - Oxford
![Page 17: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/17.jpg)
HiTEN 2009 - Oxford
Summary of Interplex 0.64mm Press-Fit
IF/RF Testing –Ag PCB’s
![Page 18: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/18.jpg)
Summary of Interplex 0.80mm Press-Fit
IF/RF Testing –Sn PCB’s
HiTEN 2009 - Oxford
![Page 19: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/19.jpg)
Summary of Interplex 0.80mm Press-Fit
IF/RF Testing –Sn PCB’s
HiTEN 2009 - Oxford
0.0
20.0
40.0
60.0
80.0
100.0
120.0
140.0
160.0
180.0
200.00
.00
0
0.0
42
0.0
83
0.1
25
0.1
67
0.2
08
0.2
50
0.2
92
0.3
33
0.3
75
0.4
17
0.4
58
0.5
00
0.5
42
0.5
83
0.6
25
0.6
67
0.7
08
0.7
50
0.7
92
0.8
33
0.8
75
0.9
17
0.9
58
1.0
00
1.0
42
1.0
83
1.1
25
1.1
67
1.2
08
1.2
50
Forc
e (
N)
Distance (mm)
Press-in 0.8 PF in Ø1.35 PTH
Push-out 0.8 PF in Ø1.35 PTH
Press-in 0.8 PF in Ø1.45 PTH
Push-out 0.8 PF in Ø1.45 PTH
![Page 20: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/20.jpg)
Summary of Interplex 0.80mm Press-Fit
IF/RF Testing –Ag PCB’s
HiTEN 2009 - Oxford
![Page 21: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/21.jpg)
IFVerified
Contact ResistanceVerified
X-SectionsPlated Through Hole IntegrityIEC-60352-5
HiTEN 2009 - Oxford21
Testing Results Plated Through Hole Integrity
IEC -60352-5 Requirements
![Page 22: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/22.jpg)
HiTEN 2009 - Oxford
b
b= Plating Thickness
a= Drill Hole Contour Deformation
Horizontal Vertical Single Layer Vertical Four Layer
a
c= Trace Deformation
c
c
Testing Results Plated Through Hole Integrity
IEC -60352-5 Requirements
![Page 23: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/23.jpg)
0.64 mm Plated Through Hole Integrity
Drill Hole Contour Deformation "a" [µm]
Remaining Plating Thickness "b" [µm]
Vertical Trace Deformation "c" [µm]
PTH size Lower Limit Upper Limit Lower Limit Upper Limit Lower Limit Upper Limit
Maximum value 19.3 14.7 34.0 30.0 18.8 6.1
Mean value 9.9 7.1 37.6 25.0 9.1 3.0
Minimum value 3.3 1.5 21.5 20.5 1.5 0.0
Requirement 50.8 maximum 8.0 minimum 50.0 maximum
Cross Section Dimensional Data in Immersion Silver PCB
Drill Hole Contour Deformation "a" [µm]
Remaining Plating Thickness "b" [µm]
Vertical Trace Deformation "c" [µm]
PTH size Lower Limit Upper Limit Lower Limit Upper Limit Lower Limit Upper Limit
Maximum value 31.8 30.2 58.4 61.1 17.8 12.7
Mean value 22.5 26.8 51.0 44.0 9.7 6.4
Minimum value 14.6 22.9 44.5 27.8 3.8 3.2
Requirement 50.8 maximum 8.0 minimum 50.0 maximum
Cross Section Dimensional Data in Immersion Tin PCB
Lower Limit Hole
Upper Limit Hole
HiTEN 2009 - Oxford23
![Page 24: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/24.jpg)
0.80 mm Plated Through Hole Integrity
Cross Section Dimensional Data in Immersion Silver PCB
Cross Section Dimensional Data in Immersion Tin PCB
Lower Limit Hole
Upper Limit Hole
HiTEN 2009 - Oxford24
![Page 25: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/25.jpg)
Standards applicable
IEC, EIA, SAE
Tier 1 Automotive OEM,
OEM Qualifications
Hella, Conti, Bosch, TRW, Volkswagen, GM & Omron etc.
Approvals ...
HiTEN 2009 - Oxford
![Page 26: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/26.jpg)
Design Drivers
1) 1.) Operational Temperature & Mounting Location
2) 2.) Sealed or unsealed requirements
3) 3.) PCB Plating and PCB Thickness
4) 4.) Power Requirements and Lead Interface
5) 5.) Operational frequency
Options & features Effected by Design Drivers
1.) Raw Material- 4 core options +
2.) Plating Lead Interface- Various interconnect and wire bondable options
3.) Press-Fit Gauge Thickness
4.) Plastic material- Multiple options
5.) Bend Radius
Module development
HiTEN 2009 - Oxford
![Page 27: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/27.jpg)
Plug & Play philosophy ....
Complex Engineering:
- Stamp
- Plate
- Mold
Integrated Connector Package Modules
HiTEN 2009 - Oxford
![Page 28: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/28.jpg)
Customer Specific Application Testing
HiTEN 2009 - Oxford
![Page 29: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/29.jpg)
Bus Bar
Interconnects
&
Fuse Receptacles
Junction Boxes
Solder Less Circuit Stacking ApplicationsComponent Holders
Motor & Flapper Controls
Engine & Transmission Controllers
Molded Sensor & Control
Modules
Automotive Applications …
HiTEN 2009 - Oxford
Tire Pressure Monitors
![Page 30: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/30.jpg)
Telecomms
Telecom- Backplane
Automotive
MAP, Pressure & Position Sensors
Inverters & Power Module
Transport
IGBT Power modules
Energy
Solar Interconnects
Future ....
DC to DC power Conversions
Transportation, Energy-Oil & Gas, Wind energy
IDC to press-fit applications
Other Applications…
HiTEN 2009 - Oxford
Picture courtesy Infineon
![Page 31: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/31.jpg)
Direct Insert Press-fit Applications…
HiTEN 2009 - Oxford
![Page 32: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/32.jpg)
Automotive Electronics is a primary “Harsh Environment” for electronic connectors...
Motor and Power control equipment will be the next major development area for electronic interconnection issues
Press-Fit interconnects are an enabler for more reliable and robust connections in Harsh Environments
Adaption to Integrated Connector Package Modules (ICPM) will contribute to greener, more sustainable electronics
Conclusions
HiTEN 2009 - Oxford
![Page 33: Adapting Press-Fit Connection Technology for Electronic ...](https://reader031.fdocuments.us/reader031/viewer/2022012300/61e16cdfcb40d21dfa6f8635/html5/thumbnails/33.jpg)
The Authors would like to Acknowledge the help and assistance of :
Interplex Engineered Products- East Providence RI
Interplex Soprec, Besancon
France
Test Authorities
- Contech Research, Attleboro, MA
- SGS Germany GmbH , München
- Intertek Labs, Livonia, MI
For their assistance and permission to publish this information.
Thank you for your attention
HiTEN 2009 - Oxford