Adapting Balancer Battery Connectors, thunderpower
Click here to load reader
Transcript of Adapting Balancer Battery Connectors, thunderpower
Copyright © 2006-2007 BP Hobbies LLC, All Rights Reserved 1
Adapting FullyMax, E-Sky, Dynam, Align, ThunderPower, etc. Batteries to Sky-Holic or Apache Balancers Using FA205 Universal Connectors
Use 2.0mm pitch FA205 connectors for ThunderPower, and 2.5mm pitch FA205
connectors for FullyMax/E-Sky/Dynam/Align and other Chinese batteries. Insulate all solder connections with heat-shrink tubing.
Cell 1 + / Pack + Cell 1 - / Cell 2 + Cell 2 - / Pack -
+ -
Black
PQBM-2 2-Cell E-Tec/Polyquest
Male Balancer Connector (5 Pins, 3 Wires)
Red
Cut (Not Used)
Cell 1 + / Pack + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 + Cell 3 - / Cell 4 + Cell 4 - / Cell 5 + Cell 5 - / Pack -
+
-
Black
PQBM-5 5-Cell E-Tec/Polyquest
Male Balancer Connector(6 Pins, 6 Wires)
Red
Splice Here
Cell 1 + / Pack + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 + Cell 3 - / Pack -
+
-
Black
PQBM-3 3-Cell E-Tec/Polyquest
Male Balancer Connector (5 Pins, 4 Wires)
Red
Splice Here
Cell 1 + / Pack + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 + Cell 3 - / Cell 4 + Cell 4 - / Pack -
+
-
Black
PQBM-4 4-Cell E-Tec/Polyquest
Male Balancer Connector(5 Pins, 5 Wires)
Red
Splice Here
Splice Here
Cut (Not Used)
Cut (Not Used)
FA205-3P Universal Connector
FA205-4P Universal Connector
FA205-5P Universal Connector
FA205-6P Universal Connector
2- Cell (7.4V) Pack Adapter
4- Cell (14.8V) Pack Adapter
5- Cell (18.5V) Pack Adapter
3- Cell (11.1V) Pack Adapter
Copyright © 2006-2007 BP Hobbies LLC, All Rights Reserved 2
Adapting FullyMax, E-Sky, Dynam, Align, ThunderPower, etc. Batteries to Sky-Holic or Apache Balancers Using FMBF JST-XHR Connectors
Use the FMBF adapters for E-Sky/Dynam/Align, most FullyMax, and other Chinese batteries. Insulate all solder connections with heat-shrink tubing.
Cell 1 + / Pack +
Cell 1 - / Cell 2 +
Cell 2 - / Pack - Black
PQBM-2 2-Cell E-Tec/Polyquest
Male Balancer Connector (5 Pins, 3 Wires)
Red
Cell 1 + / Pack + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 + Cell 3 - / Cell 4 + Cell 4 - / Cell 5 + Cell 5 - / Pack -
Black
PQBM-5 5-Cell E-Tec/Polyquest
Male Balancer Connector(6 Pins, 6 Wires)
Red
Splice Here
Cell 1 + / Pack +
Cell 1 - / Cell 2 +
Cell 2 - / Cell 3 +
Cell 3 - / Pack - Black
PQBM-3 3-Cell E-Tec/Polyquest
Male Balancer Connector (5 Pins, 4 Wires)
Red
Splice Here
Cell 1 + / Pack +
Cell 1 - / Cell 2 +
Cell 2 - / Cell 3 +
Cell 3 - / Cell 4 +
Cell 4 - / Pack - Black
PQBM-4 4-Cell E-Tec/Polyquest
Male Balancer Connector(5 Pins, 5 Wires)
Red
Splice Here
Splice Here
FMBF-2 2-Cell JST-XHR Female Balancer Connector (3 Pins, 3 Wires)
FMBF-3 3-Cell JST-XHR Female Balancer Connector (4 Pins, 4 Wires)
FMBF-4 4-Cell JST-XHR Female Balancer Connector (5 Pins, 5 Wires)
FMBF-5 5-Cell JST-XHR Female Balancer Connector (6 Pins, 6 Wires)
2- Cell (7.4V) Pack Adapter
4- Cell (14.8V) Pack Adapter
5- Cell (18.5V) Pack Adapter
3- Cell (11.1V) Pack Adapter
Copyright © 2006-2007 BP Hobbies LLC, All Rights Reserved 3
- + Cell
#1
- + Cell
#2
- + Cell
#3
Cell 1 + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 +
(Unused) Cell 3 -
3S Pack Wiring Diagram For Polyquest/E-Tec/Apache Balancing Connector
Sky-Holic 3-Cell Adapter
- + Cell
#1
- + Cell
#2
Cell 1 + Cell 1 - / Cell 2 +
(Unused) (Unused) Cell 3 -
2S Pack Wiring Diagram For Polyquest/E-Tec/Apache Balancing Connector
Sky-Holic 2-Cell Adapter
- + Cell
#1
- + Cell
#2
- + Cell
#3
Cell 1 + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 + Cell 3 - / Cell 4 +
Cell 3 -
4S Pack Wiring Diagram For Polyquest/E-Tec/Apache Balancing Connector
Sky-Holic Balancer Connector (No adapter required)
- + Cell
#4
Red
Red
Black
Black
Black
Black
Black
Black
Black
Black
Red
Red
Black
Red
Red
Pack -
Pack +
Pack -
Pack +
Pack -
Pack +
Copyright © 2006-2007 BP Hobbies LLC, All Rights Reserved 4
- + Cell
#1
- + Cell
#2
- + Cell
#3
Cell 1 + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 +
Cell 3 -
3S Pack Wiring Diagram For Thunder Power Balancing Connector Using An Adapter
Sky-Holic 3-Cell Adapter
Blue
White
Black
Orange
Red
- + Cell
#1
- + Cell
#2
Unused Cell 1 +
Cell 1 - / Cell 2 + Cell 2 -
2S Pack Wiring Diagram For Thunder Power Balancing Connector Using an Adapter
Sky-Holic 2-Cell Adapter
Blue
White
Black
Orange (Unused)
Red
Pack -
Pack +
Copyright © 2006-2007 BP Hobbies LLC, All Rights Reserved 5
- + Cell
#1
- + Cell
#2
- + Cell
#3
Cell 1 + Cell 1 - / Cell 2 + Cell 2 - / Cell 3 +
Cell 3 - (Unused)
Modified Sky-Holic 3-Cell Adapter (Move bottom black wire up one pin)
3S Pack Wiring Diagram With Flightpower / Vampower Balancing Connector
Black
- + Cell
#1
- + Cell
#2
- + Cell
#3
3S Pack Wiring Diagram For Replacing Thunder Power Connector With Polyquest/E-Tec Connector
Blue
White
Black
Orange
- + Cell
#1
- + Cell
#2
2S Pack Wiring Diagram For Replacing Thunder Power Connector With Polyquest/E-Tec Connector
PQBM-2 2-Cell Connector
Blue
White
Black
Orange (Unused)
Red
Pack -
Pack +
Splice Here
3-Cell Connector
Red
Splice Here