MAKING MODERN LIVING POSSIBLE

REFRIGERATION & AIR CONDITIONING DIVISION

ADAP-KOOL® Drive Maximising store efficiency. Minimising environmental impact.

� ��

The AKD 102 ADAP-KOOL inverter from Danfoss Food Retail has been designed with our Food Retail refrigeration customers clearly in mind.

The drive is designed to make commissioning and installation a simple and easy task.

The built in “wizard set up menu” and inbuilt “pack controller” guides the installer through the set up of the drive in a clear and structured manner, and has been constructed with reference to the industries refrigeration engineers, to ensure that the text and language used makes complete sense to the installer.

Included on this local control panel is an “info” button which is essentially a built in drive instruction manual which help the user to both gain information and also suggests other parameters which may need to be changed.

The AKD 10� drive comes with a common user interface which covers all power ratings between 1.1- �50kW.

The drive can be supplied in either of two protection classes IP�1 or IP55

Set up wizard applications

The AKD wizard is structured into three basic applications.• Compressor.• Multi condenser fan.• Single fan and pump.

The AKD 102 comes with a common user interface and covers power ratings of between 1.1-250 kW.

Built to lastAKD are built to last – even when it gets hot. AKD are made with the highest quality standards and they are built to operate trouble-free in ambient temperatures up to 50° C, year after year. This guarantees maximum uptime and lowest possible cost of ownership.

The AKD 10� Drive from Danfoss Food Retail

� 5

Continuous variable speed control with AKD drive makes intelligent capacity control possible.

Intelligent compressor and condenser fan control is a “must” in any optimised refrigeration system.

All Danfoss ADAP-KOOL® Next Generation products are designed and manufactured to our core business values:

Whether it’s a small store or a hypermarket, Danfoss ADAP-KOOL® Next Generation products have been developed to give you the best of both worlds – outstanding performance and reduced running costs.

A totally flexible system for all food retailers featuring a wide range of adaptive products that work to your requirements and allow you to configure the optimum solution for your business, regardless of size.

ADAP-KOOL® Next Generation products are designed to be integrated into a complete system but can easily adapt to work within existing installations if necessary.

ADAP-KOOL® Next Generation products will bring your refrigeration facility and full store costs under control today and protect your investment as industry standards develop in the future.

Food Quality• Increased Food Quality is assured

through accuracy of control and monitoring of Critical Control Points

• Provides documentary evidence and traceability for HACCP Compliance

• Full local and remote temperature alarm monitoring for increased food safety

• Maintains correct and accurate product temperatures to avoid food loss and wastage costs

Energy and Environment• Maximises store system efficiency • Minimises environmental impact by

reducing carbon footprint

Total Solution• Fully integrated control network

for remote access to control, monitoring and service support

• Ensures best return on system investment and maximises store up-time

• Accurately maintains temperature performance across the display, storage and store facilities

Lighting Control

Case Controller

AKV Valve

Case Controller

Case Controller

Pack Controller

Gas Leak Detection

Front End System Manager

Remote Store Access

Optimising your energy and food quality

Wireless Temperature Monitor

� �

The modular ADAP-KOOL® DriveAKD allows for mass production and factory testing of highly customised drives. Upgrades and options are plug-and-play easy.

24 V �� V supply keeps AKDlogic "alive" when the AC power is removed.

EnclosureThe drive meets requirements for enclosure class IP �1/NEMA 1 and IP 55/NEMA 1� or IP ��/NEMA �.

Cold plate technologyThe drive is built on rock-solid aluminium base that is integrated with the back plate. This provides high mechanical stability, efficient cooling.

50 °C ambient temperature The AKD is designed to work a maximum output in an ambient temperature up of 50°C.

DC coilThe renowned DC coil ensures very low harmonic disturbance of the power supply. It is built in accordance with IEC-1000-�-�. The drives compact design means there is no need for any external module.

RFI RFI options for A1/B1 plus optional A�, for compliance with IEC �1000 and EN �1800 standards.

Coated PCB All PCB’s within the AKD are coated to make the drive even more reliable even in the harshest of ambient air conditions.

Removable fan coverLike most of the other elements, the fan cover can be quickly removed and remounted for easy cleaning.

Control terminalsSpecially developed spring-loaded cage clamps enhance reliability and facilitate easy commissioning and servicing.

Fieldbus optionOption for bus communication via ADAP-KOOL Lon can be delivered when the drive is built in the factory or retrofitted at a later date.

Applications optionRelay option boardAnalogue I/O boardGeneral purpose IO board

Display optionsThe AKD comes with the option of a full graphical display or blank cover, this item can be used when the drives is under the complete control of the ADAP-KOOL® system manager or gateway via the AK Lon network.One big breakthrough with the AKD 10� is the use of wizard driven menu structure which has been construct-ed with the assistance of engineers from the field of refrigeration. The programming method talks in language familiar to the industry and make the job of commisioning extremely simple indeed.An inbuilt “pack controller” is standard within the drives software this may be used for compressors or multi motor condenser fans.The LCP allows for up to �� different languages (including Chinese) these languages must be specified at manu-facturing stage as the drive holds up to six languages within its memory.The info button makes the need for a printed manual virtually redundant. The automatic Motor Adaption, wizard menu and large plain language display makes the AKD a breeze to set up commision and live with.

Hot pluggable LCP The local control panel (LPC) can be plugged or unplugged during operation. Settings are easily trans-ferred via the LCP from one drive to another. Alternatively the MCT10 software can be used via a PC.

8 �

Graphical display• International letters and signs• Showing bars and graphs• Easy overview• Possible to select �� languages• iF awarded design

Other benefits• Removable during operation• Up- and download functionality• IP �5 rating when mounted in a panel door• Up to 5 different variables visible at a time

Illumination• Important buttons are illuminated

when active

ADAP-KOOL® Drive Application Guide– A series of questions will guide the

user through a complete the setup for these applications:

– Compressor applications – Condensor fan applications – Single fan/pump applications

– Contains all necessary steps to run the application

– Guides the user to correct cable mounting

– Graphical instructions for correct switch settings during the setup

Quick MenusThe ADAP-Kool® Drive Application Guide provides quick and easy setup for specific applications.

For easy access to other useful functionality, Quick Menu’s are accessible through the control panel, and contains:• A Danfoss defined Quick Menu• A Personal defined Quick Menu• A Changes Made Menu lists the

parameters unique for your application

• A Logging menu provides access to operation history

New buttons• Info (“on board manual”)• Cancel (“undo”)• Alarm log (quick access)

�

Two panel options: graphical and blind cover. The AKD is controlled locally via a control panel.This is plugged in directly or connected via acable.

The AKD can be remote commissioned and monitored via a USB cable or bus communication. Special software is available: Wizards, Data transfer tool, AKD® Set-up Software, MCT 10 and Language changer.

The new AKD 10� provides optimum potential to save energy within a food retail store

8

50% speed cuts noise by 16.5 dBA.Improve comfort for the employeesand the neighbours.

Noise reduction (fans) Compressor speed control adjusting to demand

Noise Reduction

55 Log Speed 1 Speed 2

-16,6dBA

-12,2dBA

-8,5dBA

-5,3dBA

-2,5dBA

-0dBA

rpm

dBA64

700 840 980 1120 1260 1400

Line frequency

50 Hz

90 Hz 1800 RPM

540 RPM30 Hz

Multiple speed controlled compressors combines with equal single step compressors.

10 11

10

Compressor features Benefits

• Running in current limit at min. speed – Reduce starts and stops of the compressor which leads to increased life time

• High starting torque – Provides higher torque at a set time for starting the compressor

• Thermostat/Pressostat function – Compressor can be stopped based on a feedback signal from the system

• Injection on/off

– All AKV valves will be closed by the system controller when compressors are not

running, due to an alarm within the network

• PO optimization– Optimisation of the evaporation pressure/

temperature based upon a signal from the highest loaded case within the plant

• Pack Controller – Ability to control up to � compressors in a pack

Compressor features

Set point in temperature The AKD calculates the actual room temperature from the pressure in the cooling media – a library of more than �0 refrigerants can be chosen from- and refines the compressor operation accordingly – without the need for additional software, sensors or controllers. This calculation is also applicable to the set point as well, so the desired temperature is set via the Local Control Panel – and not a pressure value.

“Anti-short cycle time”Anti–short cycle time can be programmed directly into the AKD via the Local Control Panel, and is dictated by the minimum time between starts given by the compres-sor manufacturer. This feature extends the mechanical lifetime of the compressor.

Control of bypass valveTo extend life even further, the AKD opens a bypass valve and lets the compresser start quickly without load. The AKD provides 1�0% break away torque and can give 110% torque for �0 seconds in normal operation. This torque demand would normally require larger and more expensive drives.

Scroll

The scroll compressors are gaining market share in the refrigeration applications. The AKD have dedicated refrigeration system functions to control these compressors.

Piston

The piston compressor is a very versatile compressor and the compressor type is widely used in food-retail applications. A piston compressor with an AKD gains lifetime as well as COP.

Auto tune PID controllers can control refrigeration system functions with fans, pumps and compressors. Valuable data points are saved.

Single compressor or compressor pack:The AKD will benefit both applica-tions. The drive can be used to control a pack of � or � compressors without adding additional controls – every-thing is built in! The drive can also provide the same level of flexibility with one large compressor instead of a pack of smaller compressors.

Piston compressor Fixed speed

Piston compressor Fixed speed

Piston compressor Variable speed

++Zone

++Zone

–Zone

– –Zone

NZREF

Cap

11

On board pack controller as standard

The AKD 102 comes with a pack controller on board as standard. The controller is limited to control-ling a maximum of three compres-sors, one as variable speed and the other two as fixed speeds.

This can eliminate the need for extra external controls add simplicity and save cost

Features and Functionality• Controlling one variable speed and

up to two fixed speed compressors.• Cycling of fixed speed compressors

due to running hours.• Short cycling protection • Fixed speed compressor control in a

fail situation.

Neutral zone controller• All zones and delays have a corre-

sponding parameter, which allows unsymmetrical zones.

• Neutral zone is symmetrical around the set-point.

Staging/de-staging threshold• The threshold of staging and de-

staging of a fixed speed compressor can be set with respect to the speed of the variable speed compressor. The idea is to smoothen out the capacity jump when staging or de-staging a fixed speed compressor.

Fixed speed compressor start• Direct on line start.• Soft starter.• Possibility to start fixed speed

compressor before ramping down of variable speed compressor.

• Possibility to delay stop of fixed speed compressor after ramping up on variable speed compressor.

Fixed speed compressor control in fail situation

• The AKD continues to control fixed speed compressors in situations where the variable speed compres-sor fails.

• Neutral zone is in a fail situation set by a special parameter ”Fixed speed neutral zone”, which gives the opportunity to have fewer starts by expanding the neutral zone.

1� 1�

Pump Cascade ControllerThe Pump Cascade Controller is the most sophisticated controller on the market.

It distributes running hours evenly across all pumps, keeps wear and tear on individual pumps to a minimum and ensures that all pumps are in great shape.

CondenserEvaporator

Reduced ice build-up and optimized evaporator temperature leads to lower energy consumption and higher system efficiency. The energy consumption is reduced by always matching capacity to the actual load.

Monitors broken belt, dry pump and “end-of-curve”From the relation between current and speed, the AKD reliably recog-nizes “effortless” high speed – where the desired pressure is not reached despite of the speed, and indicates a broken belt, a dry pump or a major leak.

The drive sets off an alarm, shuts off the pump, or performs another programmed action.

First cost and down-time is reduced and equipment is protected.

Optimal control leads to stabilized pressure in the condensor. This ensures better control of the pressure difference between evaporator and condenser and a better COP for the compressor. The control of airflow is matched to the actual need resulting in decreased audible noise and energy consumption.

AKD drives offer a vast number of pump-specific features developed in cooperation with OEMs, contractors and manufacturers around the world.

Sleep Mode In Sleep Mode the drive detects situations with low or no flow. Instead of continuous operation it boosts the system pressure and then stops to save energy. The drive starts automatically when the pressure falls below the lower set point.

Pump features Benefits

• Pump Cascade Controller – Keeps wear and tear on individual pumps to a minimum

• Sleep Mode – Save energy

• Dry Pump Protection – Protect the pump– Save energy

• End of Curve – Protects the pump – Reduce energy consumption

• Flow compensation – Saves energy

Pump

Evaporator, pump and condenser features

Voltage 3 x 200 – 240 VAC

Typical shaftoutput

Outputcurrent [A]

3 x 200 – 240 V

EnclosureWeight

IP 20/21**

EnclosureWeight

IP 55

DimensionsIP 20/21**

DimensionsIP 55/IP 66

Type kW HP Cont. 60 s* kg Lbs. kg Lbs. H x W x D H x W x D

AKD10�P1K1T� 1.1 1.5 �.� �.� �.8 10.� 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P1K5T� 1.5 �.0 �.5 8.� �.� 10.8 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P�K�T� �.� �.0 10.� 11.� �.� 10.8 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P�K0T� �.0 �.0 1�.5 1�.8 �.� 1�.� 1�.� �1.� ��8 x 1�0 x �05 ��0 x ��� x 1�5

AKD10�P�K�T� �.� 5.0 1�.� 18.� �.� 1�.� 1�.� �1.� ��8 x 1�0 x �05 ��0 x ��� x 1�5

AKD10�P5K5T� 5.5 �.5 ��.� ��.� �� �� �� 51 �80 x ��� x ��0 �80 x ��� x ��0

AKD10�P�K5T� �.5 10 �0.8 ��.� �� �� �� 51 �80 x ��� x ��0 �80 x ��� x ��0

AKD10�P11KT� 11 15 ��.� 50.8 �� �0 �8 �� �50 x ��� x ��0 �50 x ��� x ��0

AKD10�P15KT� 15 �0 5�.� �5.� �� �0 �8 �� �50 x ��� x ��0 �50 x ��� x ��0

AKD10�P18KT� 18.5 �5 ��.8 8�.� �� 1�� �5 1�� �80 x �08 x �10 �80 x �08 x �10

AKD10�P��KT� �� �0 88.0 ��.8 �� 1�� �5 1�� �80 x �08 x �10 �80 x �08 x �10

AKD10�P�0KT� �0 �0 115 1��.5 �� 1�� �5 1�� ��5 x ��0 x ��5 ��5 x ��0 x ��5

AKD10�P��KT� �� 50 1�� 15�.� �� �5 �5 100 ��5 x ��0 x ��5 ��5 x ��0 x ��5

AKD10�P�5KT� �5 �0 1�0 18� �� �5 �5 100 ��5 x ��0 x ��5 ��5 x ��0 x ��5

* I max for 60 s – ** IP 21 from 5.5 kW to 45 kW – H x W x D means Height x Width x Depth

* I max for 60 s – ** IP 21 from 11 kW to 90 kW – *** IP 54 from 110kW – H x W x D means Height x Width x Depth

Specifications

Voltage3 x 380 – 480 VAC

Typical shaftoutput

Outputcurrent [A]

3 x 380 – 440 V

Outputcurrent [A]

3 x 440 – 480 V

EnclosureWeight

IP 20/21**

EnclosureWeight

IP 55***/IP 66

DimensionsIP 20/21**

DimensionsIP 55***/IP 66

Type kW HP Cont. 60 s* Cont. 60 s* kg Lbs. kg Lbs. H x W x D H x W x D

AKD10�P1K1T� 1.1 1.5 �.0 �.� �.� � �.8 10.� 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P1K5T� 1.5 �.0 �.1 �.5 �.� �.� �.� 10.8 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P�K�T� �.� �.0 5.� �.� �.8 5.� �.� 10.8 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P�K0T� �.0 �.0 �.� �.� �.� �.� �.� 10.8 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P�K0T� �.0 5.5 10.0 11 8.� � �.� 10.8 1�.� �1.� ��8 x �0 x �05 ��0 x ��� x 1�5

AKD10�P5K5T� 5.5 �.5 1�.0 15.� 11.0 1�.� �.� 1�.� 1�.� �1.� ��8 x 1�0 x �05 ��0 x ��� x 1�5

AKD10�P�K5T� �.5 10 1�.0 1�.� 1�.5 1� �.� 1�.� 1�.� �1.� ��8 x 1�0 x �05 ��0 x ��� x 1�5

AKD10�P11KT� 11 15 ��.0 ��.� �1.0 ��.1 �� �� �� 51 �80 x ��� x ��0 �80 x ��� x ��0

AKD10�P15KT� 15 �0 ��.0 �5.� ��.0 ��.� �� �� �� 51 �80 x ��� x ��0 �80 x ��� x ��0

AKD10�P18KT� 18.5 �5 ��.5 �1.� ��.0 ��.� �� �� �� 51 �80 x ��� x ��0 �80 x ��� x ��0

AKD10�P��KT� �� �0 ��.0 �8.� �0.0 ��.0 �� �0 �� �� �50 x ��� x ��0 �50 x ��� x ��0

AKD10�P�0KT� �0 �0 �1.0 ��.1 5�.0 5�.� �� �0 �� �� �50 x ��� x ��0 �50 x ��� x ��0

AKD10�P��KT� �� 50 ��.0 80.� �5.0 �1.5 �5 �5 �5 100 �80 x �08 x �10 �80 x �08 x �10

AKD10�P�5KT� �5 �0 �0.0 �� 80.0 88 �5 �5 �5 100 �80 x �08 x �10 �80 x �08 x �10

AKD10�P55KT� 55 �5 10� 11�.� 105 115.5 �5 �5 �5 100 �80 x �08 x �10 �80 x �08 x �10

AKD10�P�5KT� �5 100 1�� 1�1.� 1�0 1�� �5 1�� �5 1�� ��5 x ��0 x ��5 ��5 x ��0 x ��5

AKD10�P�0KT� �0 1�5 1�� 1��.� 1�0 1�� �5 1�� �5 1�� ��5 x ��0 x ��5 ��5 x ��0 x ��5

AKD10�P110T� 110 150 �1� ��� 1�0 �0� �� �1� �� �1� 1�08 x ��0 x ��� 1�08 x ��0 x ���

AKD10�P1��T� 1�� �00 ��0 �8� ��0 ��� 10� ��0 10� ��0 1�08 x ��0 x ��� 1�08 x ��0 x ���

AKD10�P1�0T� 1�0 �50 �15 ��� �0� ���.� 1�5 ��� 1�5 ��� 1588 x ��0 x ��� 1588 x ��0 x ���

AKD10�P�00T� �00 �00 ��5 ��� ��1 ���.1 1�� �01 1�� �01 1588 x ��0 x ��� 1588 x ��0 x ���

AKD10�P�50T� �50 �50 �80 5�8 ��� �8�.� 151 ��� 151 ��� 1588 x ��0 x ��� 1588 x ��0 x ���

1� 151�

Disconnect switch availableMounting the optional disconnect swich on the front of B, C, D or E enclosures eliminates the need for an external swich-box.

LPC Panel mounting kitThe kit lets you mount the LCP in a IP �5 cabinet front.

Sinewave filtersWhen the speed of a motor is con-trolled by a drive, resonance noise from the motor can occur. This is due to the construction of the motor and the switching of IGBTs. The frequence of the resonance will correspond to the switching frequence of the drive.

In applications where the noise is undesirable, Danfoss offers Sinewave filters for the AKD 10� to dampen the acoustics.

These filters are installed electrically between the AKD 10� and the motor to reduce voltage rise time (dv/dt), peak voltage (Vmax) and the ripple current to the motor, thus reducing the noise generated.

Sinewave filters must be ordered seperately and field installed by the customer.

Current and power ratings and specifications

H

D

W

H

W

D

OptionsA wide range of AKD options are available mounted and tested from factory or as plug-and-play options for update.

• General purpose I/O � digital inputs, � digital outputs, 1 analog current output, � analog voltage inputs• Relay outputs � relay outputs• Analogue I/O � Pt1000 / Ni1000 inputs, � analog voltage outputs • External 24 VDC supply �� VDC external supply can be connected to supply

control- and option cards

FiltersDanfoss Drives offers a wide range of external power options for use together with our drive in critical networks or applications:

• Advanced harmonic filters: For critical demands on harmonic distortion

• dv/dt filters: For special demands on motor isolation protection• Sine filters (LC filters): For noiseless motor

AKD PC software• MCT 10 – ideal for commissioning and servicing the drive• MCT 31 – harmonics calculations tool

Mains supply (L1, L2, L3)Supply voltage �00 – ��0 V ±10%

Supply voltage �80 – 500 V ±10%Supply frequency 50/�0 Hz

Displacement Power Factor (cos φ) near unity (> 0.�8)

Switching on input supply L1, L�, L�

1-� times/min.

Output data (U, V, W)Output voltage 0 – 100% of supply voltage

Switching on output UnlimitedRamp times 1 – ��00 sec

Closed loop 0 – 1�� Hz

Digital inputsProgrammable digital inputs �*

Logic PNP or NPNVoltage level 0–�� V

*2 can be used as digital outputs

Analog inputAnalog inputs �

Modes Voltage or currentVoltage level 0 – 10 V (scaleable)

Current level 0/� – �0 mA (scaleable)

Pulse inputsProgrammable pulse inputs �

Voltage level 0-�� VDC (PNP positive logic)Pulse input accuracy (0.1 – 110 kHz)

Max. error 0.1% of full scale

Analog outputProgrammable analog outputs 1

Current range at analog output 0/� – �0 mA

Relay outputs

Programmable relay outputs(��0 VAC, � A and �00 VAC, � A) �

Fieldbus communicationStandard built in FC Protocol

Optional AKD LonWorks

Choose configurations freely These are the thousands of ways to configure AKD. By choosing between options, you define your unique drive number. Your drive is factory built from this number.

You can configure online at www.Danfoss.com/drives - choose ”Online Configuration.”

Pow

er s

ize

Mai

ns v

olta

ge

E= N

orm

.; P

= ba

ckpl

ate

Har

dwar

e op

tion

Soft

war

e

AKD 10� P T H X X S X X X X A B C X X X X D

Power size [kW] RFI filter A-options1.10 1 K 1 A1/B 1 No option X1.5 1 K 5 A� � AKD LON WORKS Z�.� � K �� � K 0 B-options

�.� � K � Brake No option X� � K 0 No brake X General purpose I/O K

5.5 5 K 5 No brake + safe stop T Analogue I/O O�.5 � K 5 Relay option P11 1 1 K15 1 5 K Reserved

18.5 1 8 K Local Control panel�� � � K No LCP X�0 � 0 K Graphical LCP G�� � � K�5 � 5 K Coating D-options55 5 5 K PCB not coated X No option X�5 � 5 K PCB coated C �� V DC backup 0�0 � 0 K

110 1 1 0 Mains Voltage Mains Options1�� 1 � � � �00 – ��0 X No options1�0 1 � 0 � �80 – �80 1 Mains disconnect�00 � 0 0�50 � 5 0

Enclosure� 0 IP �0/Chassis� 1 IP �1/Nema Type15 5 IP 55/Nema Type 1�� � IP ��

Note: As standard the AKD 102 comes with a AI/B RFI filter to EN 55011. A2 and other filter options are available on request.

In response to the growing demand for worldwide service and support, Danfoss is setting the record for technological innovation and customer support. All our �� manufacturing facilities, located on three continents, are ISO �000, ISO 1�00 certified (environmental certification).

DKRCE.PB.S00.B1.0� / 5�0H���� Produced by Brink Markting/KKM �00�.08

www.danfoss.com/foodretail

AustriaDanfoss Gesellschaft m.b.H.Danfoss-Strasse 8A-��5� GuntramsdorfTel: +�� ���� 50�0Fax: +�� ���� 50�0 ��E-mail: e-mail@danfoss.ch

EstoniaDanfoss ASPärnu mnt 1��FEE-11�1� TallinnTel: +��� � 5�� �00Fax: +��� � 5�� �01E-mail: danfoss@danfoss.ee

LithuaniaDanfoss UABSmolensko �LT-0��01 VilniusTel: +��0 5 �105 ��0fax: +��0 5 ���5 �55www.danfoss.lt

Serbia & MontenegroDanfoss d.o.o.Milutina Milankovica ��CS-11000 BeogradTel: +�81 11 �1� 0��0Fax: +�81 11 �1� 0���E-mail: danfoss.cs@danfoss.com

BelgiumN.V. Danfoss S.A.A. Gossetlaan �8B-1�0� Groot- BijgaardenTel: +�� � 5�5 0� 11Fax: +�� � 5�5 0� 5�E-mail: info@danfoss.be

FinlandOy Danfoss AbKivenlahdentie �P.O. Box ��FIN-0���0 EspooTel: +�58 � 80� 81Fax.: +�58 � 80� 85��E-mail: kylma@danfoss.fi

NetherlandsDanfoss B.V.Admiraal Lucashof �NL-�115 AE SchiedamTel: +�1 (10) ��� �1 �5Fax: +�1 (10) ��� �1 �1

Slovak RepublicDanfoss s.r.o.Továrenská ��,SK-�5� 01 Zlaté MoravceTel: +��1 (��) ��0����Fax: +��1 (��) ��0���0E-mail: danfoss.sk@danfoss.com

BulgariaDanfoss EOOD5, Rezbarska StreetBG-1510 SOFIATel: +�5� (0�) ��� �� 18Fax: +�5� (0�) ��� �� 11E-mail: danfoss.bg@danfoss.com

FranceDanfoss S.a.r.l.110 Avenue Jean-JaurèsF-��00� LyonTel: +�� (�) ���5�800Fax.: +�� (�) ���5�8�0E-mail: danfoss@danfoss.fr

NorwayDanfoss ASÅrenga �NO-1��0 SkuiTel: +�� �� 1� �� 00Fax: +�� �� 1� �8 50E-mail: danfoss@danfoss.no

SloveniaDanfoss d.o.o.Ulica Jozeta Jame 1�SI-1�10 Ljubljana – SentvidTel: +�8� 1 518 �1 08Fax: +�8� 1 50� �5 18E-mail: danfoss.si@danfoss.com

CroatiaDanfoss d.o.o.Magazinska �aHR-10000 ZagrebTel: +�85 (1) �0� �0 ��Fax: +�85 (1) �0� �0 80E-mail: danfoss.hr@danfoss.com

GermanyDanfoss GmbHPostfach 10 0� 5�D-��00� Offenbach/MainTel: +�� (��) � �8 �8 – 5�1Fax: +�� (��) � �8 �8 – 5��E-mail: info@danfoss-sc.de

PolandDanfoss SP.Z o.o.ul Chrzanowska 505-8�5 Grodzisk MazTel: (+�8 ��) �55 0� 00Fax: (+�8 ��) �55 0� 01www.danfoss.pl

SpainDanfoss S.A.Caléndula ��Edificio I - Miniparc IIIUrb. El Soto de la MaralejaES-�810� Alcobendas (Madrid)Tel: +�� �0� �� �1 0�Fax: +�� �0� �� �1 10E-mail: ra-danfoss@danfoss.es

Czech RepublicDanfoss s.r.o.V parku ��1�/1�CZ-1�8 00 Praha � – ChodovTel: +��0 (�) 8� 01� �1�Fax: +��0 (�) 8� 01� 5��E-mail: danfoss.cz@danfoss.com

HungaryDanfoss Kft.Váci út �1HU-11�� BudapestTel: +�� (1) �50 �5�1Fax: +�� (1) �50 �5��E-mail: danfoss.hu@danfoss.com

PortugalDanfoss, Lda.Av. do Forte, no. 8-1° PPT-���0-0�� CarnaxideTel: +�51 �1 ��� 8� �1Fax: +�51 �1 �1� �5 58E-mail: danfoss@danfoss.pt

SwedenDanfoss ABIndustrigatan 5SE-581 �� LinköpingTel: +�� 1��5 8500Fax: +�� 1�1� 018�E-mail: danfoss@danfoss.se

DenmarkDanfoss A/SJegstrupvej �DK-8��1 HasselagerTel: +�5 8��8 �111Fax: +�5 8��8 ��11E-mail: koele@danfoss.dk

IrelandDanfoss Ireland Ltd.A1, Nangor Road Business ParkIE-Dublin 1�Tel: +�5� (01) ��� 8111Fax: +�5� (01) ��� ����E-mail: marketing@danfoss.ie

RomaniaDanfoss s.r.l.Str. Cutitul de Argint nr. ��Sector �RO-0�0558 BucurestiTel: +�0 �1 ��5 5� 0�Fax: +�0 �1 ��5 55 5�E-mail: danfoss.ro@danfoss.com

SwitzerlandDanfoss AGParkstrasse �CH-��0� FrenkendorfTel: +�1 (�1)-�0� 11 11Fax: +�1 (�1)-�0� 1� 11E-mail: e-mail@danfoss.ch

DubaiDanfoss FZCOPO Box �1��8Jebel Ali Free ZoneDubai, United Arab EmiratesTel: +��1 � 88 ����0Fax: +��1 � 88 ����1E-mail: danfoss@emirates.net.ae

ItalyDanfoss S.r.l.Corso Tazzoli ��1I-101�� TorinoTel: +�� (011) �000511Fax: +�� (011) �0005��E-mail: info@danfoss.it

RussiaDanfoss LLCLeshkovo, �1�Pavlovskaya Sloboda, Istra AreaRU-1��581 Moscow regionTel: +� (��5) ��� 5� 5�Fax: +� (��5) ��� 5� �0E-mail: info@danfoss.ru

United KingdomDanfoss LimitedCapswoodOxford Road, DenhamBucks UB� �LHTel: +�� 08�0 ��1 �0�1Fax: +�� 08�0 ��1 �0�5E-mail: uk.refrigeration.sales@danfoss.com