Adams Rite
Transcript of Adams Rite
Aluminum • Narrow Stile Door Locks
Installation Kit
Series 1850 and 1850S Maximum Security Deadlock
The length of this bolt provides maximum security for any single leaf door or aninstallation where the gap between door and jamb is greater than it should be. Acceptsstandard mortise cylinder.
Case Size: 1" x 6" Bolt: 5/8" x 13/8" throwFive ply laminated stainless steel. Center ply has Alumina-Ceramic core.Material: Steel plated for corrosion resistance.
Mfg. # B.S. EZ #
ARMS1850 110 628 7/8" 040023ARMS1850 210 628 31/32" 040024
ARMS1850S110 628 7/8" 025812 ARMS1850S210 313 31/32" 040027ARMS1850S210 628 31/32" 025813 ARMS1850S310 313 11/8" 040029ARMS1850S310 628 11/8" 025814 ARMS1850S410 628 11/2" 025815
Faceplate for 1850Flat - 1 1/4” x 7 13/32”
Faceplate for 1850SFlat - 1” x 6 7/8”
Lock Installation Kit Mfg# AR4418A EZ # 001013
For locksmiths or others who regularly install locks and latches in narrow stile aluminum and glass doors. Adams Rite provides a kit,complete with sturdy metal tool box. Basis of the installation kit is the mounting bridge and the positioning tool used to install it. The bridgeis screwed into place, spanning the hollow door stile to provide a sturdy mounting surface for the lock, without the need to drill and tap theglass channel. The kit contains enough bridges, resilient washers and screws for 25 installations. It also includes a special 1 11/32” hole sawand hardened steel pilot plug for quick and perfectly aligned installation of MS4043 cylinder guards. Two cylinder guards, a spare hole-sawblade, armored strike, adhesive templates and miscellaneous spare parts are also furnished.
Series 4500 Heavy Duty Deadlocking Latch• Case Size: 7/8” X 6 13/16” • Bolt: 1/2” X 1” X 1/2” throw• Faceplate: Flat standard
Mfg. # B.S. Hand EZ #
AR4510 201 628 7/8" LH 025828AR4510 201 628 31/32" LH 029590AR4510 201 313 31/32" LH 028154
12 ALUMINUM / NARROW STILE DOOR LOCKS / INSTALLATION KIT
Series 4900 Deadlocking Latch• Case Size: 7/8” X 5 13/16” • Bolt: 5/8” X 1” X 5/8” throw• Faceplate: 1 Radius and 1 Flat included
Mfg. # B.S. Hand EZ #
AR4900 35 201 628 11/8" Non-Handed 029592AR4900 35 201 313 11/8" Non-Handed 028155AR4900 45 201 628 11/2" Non-Handed 035029
AR4500
AR4900
Electric Strikes • Faceplates
Rectifier • Transformer
CaseApprox. 1” x 3 3/8” x 1 5/8”deep. Zinc-alum alloy.
Strike Lip
Basic 7100 strike has a lipof proper length for 1 3/4”thick door that closes flushwith jamb edge.
Strike Opening5/8” x 1 7/16” x 1/2” deep.Bolt retainer jawstainless steel. Strikeaccepts bolt of any AdamsRite 4700 Series deadlatchor cylindrical latches.
FaceplateAccording to application.
4603 RECTIFIERConverts AC current to DC, installs in lowvoltage line between transformer and strike.
Mfg # AR4603 EZ # 001039
4605 TRANSFORMERConverts 120VAC to 24VAC. Rated 40 volt-amp output assuresplenty of power for strike release.
Patented mounting bracket fits in knockout hole of standard junction boxes.
Mfg # AR4605 EZ # 001040
Mfg# Faceplate Voltage Features EZ #
AR7100 540 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 12 VDC / 24 VAC Int. Fail Secure 061026
AR7101 540 628 1 1⁄4” x 4 7⁄8” radius strike w/rounded corners 12 VDC / 24 VAC Int. Fail Secure 060916
AR7130 315 628 1 1⁄4” x 6 7⁄8” flat strike w/square corners 12 VDC Con/Int Fail Safe/Fail Secure 060917
AR7130 540 628 1 1⁄4” x 6 7⁄8” flat strike w/square corners 12 VDC / 24 VAC Int. Fail Secure 060918
AR7140 315 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 12 VDC Cont/Int Fail Safe/Fail Secure 060920
AR7140 310 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 12 VDC / 24 VAC Cont/Int Fail Safe/Fail Secure 060248
AR7140 515 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 24 VDC Cont/Int Fail Safe/Fail Secure 072277
AR7140 510 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 24 VDC Cont/Int Fail Safe/Fail Secure 060247
AR7140 540 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 12 VDC/24 VAC Int. Fail Secure 001053
AR7140 340 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 12 VAC Int. Fail Secure 062038
AR7170 540 628 1 1⁄4” x 4 7⁄8” flat strike w/square corners 24 VAC Int Fail Secure 001060
AR71R1 510 119 1 3⁄4” x 9” x 3⁄4” mounting plate/housing 24 VDC Cont/Int Fail Safe/Fail Secure 072278
All strikes are field reversible fail safe / fail secure
7100 Electric Strike
Faceplates
Mfg # Desc. EZ #
AR24 0017 0220 313 Flat faceplate f/4710 000898
AR24 0017 0220 628 Flat faceplate f/4710 000897
AR24 0017 1220 313 Radius faceplate f/4710 000900
AR24 0017 1220 628 Radius faceplate f/4710 000899
AR24 0017 2220 628 LH bevel faceplate f/4710 000901
AR24 0017 3220 628 RH bevel faceplate f/4710 000903
AR24 0384 120 313 Radius faceplate f/1850S-050 000928
AR24 0384 120 628 Radius faceplate f/1850S-050 000927
AR24 0384 210 628 LH bevel faceplate f/1850S 000929
AR24 0384 310 628 RH bevel faceplate f/1850S 000933
AR24 0398 010 628 Large flat faceplate f/1850 000940
AR24 0687 01 313 Faceplate for 7140 Duro 065640
AR71R1
AR24 0017 1220 628
ELECTRIC STRIKES / FACEPLATES / RECTIFIER / TRANSFORMER 13
7310 Compact Strike• Case: 1 1⁄8” x 3 3⁄8” x 1 1⁄16”• Faceplate: 1 7⁄16” x 7 15⁄16”
12 Volt / Cont. or Int. / Fail Secure
Mfg # AR7310 310 628
EZ# 084087
Narrow Stile Accessories
Exit Devices • MS Lever
4565/4568 Latch HandlesMfg# Fin. Hand EZ#
AR4565 501 121 121(313) LH 001023
AR4565 501 130 130(628) LH 001022
AR4568 501 121 121(313) LH 001027
AR4568 501 130 130(628) LH 001016
Series 8000 Exit Devices For Narrow Stile Glass Doors - U.L. Life-Safety ListedPush bars are extruded anodized aluminum with black ABS end caps. Normal no-load actuation requires only 8 lbs. pressure anywherealong bar. At rest, bar projects 2 1⁄2" above door surface. Dogging provision is by key (furnished), requiring a single quarter turn in the endcap nearer the door nose. Handing can be reversed.
8400 Mortise Exit DeviceFits in the standard narrow stile cutout used for the M.S. deadlock.Four additional 1⁄4" holes for threaded blind fasteners completethe simple stile preparation. The all steel latch case has a white bronze bolt and deadlatching mechanism. Bolt throw is 5⁄8". Accepts anystandard mortise cylinder (with A/R cam) from outside, if required. Minimum door stile depth required is backset plus .64 inch. Faceplatestocked flat – optional faceplates available. Standard strike furnished fits installations where 1 3⁄4" thick door closes flush with jamb.
Mfg# Fin. B.S. Hand EZ#
AR8410 27136 628 628 31⁄32" RHR 025836AR8410 37136 628 628 1 1⁄8" RHR 025837
8800 Rim Mounted Exit DevicePatented starwheel bolt used to achieve a high level of security and performacne by interlocking a strike mounted on the door frame. When door closes, the noseguard and starwheel bolt close around the strike, creating a solid interlock between door and frame.
Mfg# Fin. EZ#
AR8802 36 313 025836AR8802ELD36 12 313 / Electric 025837
AR4568
4590 Latch PaddlesMfg# Hand EZ #
AR4590 02 00 313 Push to left 001034
AR4590 02 00 628 Push to left 001033
8099M Active Dummy Bar with SwitchThe Active Dummy Bar has a clean, uncluttered look. Installs easily and quickly. Can be wired normally open or
normally closed to operate maglock, alarm, etc. No latching mechanism.
Mfg# AR8099M628 EZ # 060921
AR4565
14 NARROW STILE ACCESSORIES / EXIT DEVICES / MS LEVER
4550 MS LeverSpecifically designed to fit any Adams Rite MS Deadbolt.
Mfg# Fin. EZ #
AR4550L313 Duro 062459
AR4550L628 Aluminum 062460
Meets ADA guidelinesfor easy accessibility
Field Reversible
Includes Cam Plug Assembly
4580 cam disc included Field reversible.
4591 Latch PaddlesMfg# Hand EZ #
AR4591 02 00 313 LH or RHR 074885
AR4591 02 00 628 LH or RHR 074883
AR4591 04 00 313 RH or LHR 074886
AR4591 04 00 628 RH or LHR 074884
Sliding & Swinging Door Deadlocks
Replacement Parts
For Exit Devices
Mfg # Desc EZ #
AR41 0801 01 Dogging Cap 035005
AR25 0480 Dogging Key (Plastic) 000986
AR29 0480 Dogging Key 000992
AR29 0481 New Style Dogging Key 065417
AR31 0265 Dogging assembly 067223
AR41 0801 08 End cap (8800) 028236
Mounting Clip End CapCam Plug
MS1850S-050 Hookbolt DeadlockIdentical to the MS1850S, except the bolt isprovided in a hook shape to resist the partingmotion of sliding door and jamb. Acceptsstandard mortise cylinders with an AR cam.
Case Size: 1" x 6"Bolt: 5/8" x 1 3/8" x 13/16" throwFaceplate: 6 7/8" x 1" flat Strike: Order SeparatelyMaterial: Steel, plated
Mfg# B.S. EZ #
ARMS1850S150 628 7/8" 025817ARMS1850S250 628 31/32" 025818ARMS1850S350 628 1 1/8" 025819ARMS1850S450 628 1 1/2" 025820
AR4089 00 130 Exit IndicatorProvides unmistakable notification to building occupants of an exits “locked” or “open” condition. Word“LOCKED” appears in red letters and“OPEN” in black letters on whitebackground when lock is actuated.Compatible with MS1850S.
Mfg # AR4089 00 130 EZ# 001004
MS+1890 Hookbolt Deadlock & LatchTypical installation is a bank or store requiring three modes ofdoor control: (1) Both lock and latch bolts retracted forunrestricted entry and exit during business hours; (2) Paddleoperated latch for exit-only traffic just after closing, and (3)Maximum Security hookbolt for overnight lockup. Cylindersor thumbturns operate both lock and latch bolts.
Case Size: 1" x 7 3/8".Lock Bolt: 5/8" x 1 3/8" x 13/16"throw.Latch Bolt: 5/8" x 5/8" x 7/16" throw.Armor Faceplate: 6 7/8" x 1" flat.Armored Strike: Furnished flat.Finish: Clear satin anodized.
*Not compatible with electric strikes. May usewith lever paddles
Mfg# Hand B.S. EZ #
ARMS1890 2016 628 reversible 31⁄32” 025821ARMS1890 3015 628 reversible 1 1⁄8” 043510
1000 TurnsPerpendicular drive spindle.
AR1000 21 32 626 EZ# 025811
MS1847 DeadlockFor Narrow Stile Sliding DoorsCase: 1/2" x 33/16" x 11/8".Bolt: Anti-lift /Adjustable.Pulls: See 4025.Turns: See Series 1000.Finish: US32D
Mfg # ARMS1847 630 EZ # 000971
4025 Cylinder Pulls4025 has mounting holes spaced to allowclearance around 1847 lock mechanism. 05-Schlage C kwy; 06-Weiser kwy
Mfg # AR4025 05 01 130 EZ# 000997Mfg # AR4025 06 01 130 EZ# 000998
Miscellaneous Parts
Mfg # Desc EZ #
AR29 0250 12DCC Solenoid cont. duty 12DC 063530ARMS4002 012 Armored strike for MS lk 000996AR4101 01 Mounting clip - radius 001005AR4104 02 Mounting clip - flat 001006AR4104 03 Mounting clip - LH 001007AR4104 04 Mounting clip - RH 001008ARS232B8 9/32N 631 Set screw 7⁄8” b.s. 001047ARS232C08 05 631 Set screw 31⁄32” b.s. 000993ARS232C8 15/32 631 Set screw 1 1⁄8” b.s. 000970ARS23355D08R04 628 Faceplate screw 000886ARS235D08R313 Faceplate screw 040033
For Lever Handles
Mfg # Desc EZ #
AR4580 501 Cam plug - LH 001029
AR31 0485 Spindle assy. 000955
SLIDING / SWINGING DOOR DEADLOCKS / REPLACEMENT PARTS 15