ADAMS Assignment 2 ME451:Kinematics and Dynamics of Machine Systems (Spring 09)
-
Upload
laureen-gordon -
Category
Documents
-
view
224 -
download
0
description
Transcript of ADAMS Assignment 2 ME451:Kinematics and Dynamics of Machine Systems (Spring 09)
![Page 1: ADAMS Assignment 2 ME451:Kinematics and Dynamics of Machine Systems (Spring 09)](https://reader036.fdocuments.us/reader036/viewer/2022082406/5a4d1b107f8b9ab05998ed1c/html5/thumbnails/1.jpg)
ADAMS Assignment 2
ME451:Kinematics and Dynamics of Machine Systems
(Spring 09)
![Page 2: ADAMS Assignment 2 ME451:Kinematics and Dynamics of Machine Systems (Spring 09)](https://reader036.fdocuments.us/reader036/viewer/2022082406/5a4d1b107f8b9ab05998ed1c/html5/thumbnails/2.jpg)
Model Construct a slider crank mechanism as shown
300,300,0
1100,0,0
0,0,0
![Page 3: ADAMS Assignment 2 ME451:Kinematics and Dynamics of Machine Systems (Spring 09)](https://reader036.fdocuments.us/reader036/viewer/2022082406/5a4d1b107f8b9ab05998ed1c/html5/thumbnails/3.jpg)
ADAMS HELP Use “Rigid Body: Cylinder” to build the slider
Use “Rigid Body: Link” to build crank and connecting rod
Use a revolute joints between “ground and crank”, “crank and connecting rod”, “connecting rod and slider” and use translational joint between “slider and ground
Mass of Crank: 1 Kg
Mass of Connecting Rod: 2 Kg
Mass of slider: 0.5 Kg, The slider is 100 mm long on either side of its center at (1100,0,0)
The crank is driven at 1000 rpm
Run a kinematics analysis for 2 revolutions using 1000 steps
![Page 4: ADAMS Assignment 2 ME451:Kinematics and Dynamics of Machine Systems (Spring 09)](https://reader036.fdocuments.us/reader036/viewer/2022082406/5a4d1b107f8b9ab05998ed1c/html5/thumbnails/4.jpg)
ASSIGNMENT1. Report maximum acceleration for the center
of mass of the connecting rod2. Find out the maximum value of the reaction
force in the revolute joint between1. Ground and the crank2. Crank and the connecting rod
3. Find out the maximum value of acceleration for the slider
4. Find out the maximum velocity of the slider