ACX5048 and ACX5096 Universal Access Router · ProtocolorApplication ACX1000 ACX1100 ACX2000...
Transcript of ACX5048 and ACX5096 Universal Access Router · ProtocolorApplication ACX1000 ACX1100 ACX2000...
-
ACX5048 and ACX5096 Universal Access Router
Modified: 2015-08-09
Copyright © 2015, Juniper Networks, Inc.
-
Juniper Networks, Inc.1133 InnovationWaySunnyvale, California 94089USA408-745-2000www.juniper.net
Copyright © 2015, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the UnitedStates and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All othertrademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,transfer, or otherwise revise this publication without notice.
ACX5048 and ACX5096 Universal Access RouterCopyright © 2015, Juniper Networks, Inc.All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through theyear 2038. However, the NTP application is known to have some difficulty in the year 2036.
ENDUSER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networkssoftware. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted athttp://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions ofthat EULA.
Copyright © 2015, Juniper Networks, Inc.ii
http://www.juniper.net/support/eula.html
-
Table of Contents
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Part 1 Overview
Chapter 1 System Overview and Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ACX5000 Universal Access Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ACX5048 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ACX5096 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ACX5000 Router Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Field-Replaceable Units in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
UnderstandingHardwareRedundancyofanACX5000RouterComponentsand
Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ACX5000 Routers Hardware and CLI Terminology Mapping . . . . . . . . . . . . . . . . . . 7
ACX5048 Router Hardware and CLI Terminology Mapping . . . . . . . . . . . . . . . 7
ACX5096 Router Hardware and CLI Terminology Mapping . . . . . . . . . . . . . . . 8
ACX5000 System Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Protocols and Applications Supported by the ACX Routers . . . . . . . . . . . . . . . . . . 10
Chapter 2 Chassis Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Management Panel of an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Port Panel of an ACX5048 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Port Panel of an ACX5096 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Router Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Channelizing Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chassis Status LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Management Port LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Access Port and Uplink Port LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . 26
Fan Module LED on an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
AC Power Supply LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DC Power Supply LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 3 Cooling System Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . 33
Cooling System and Airflow in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . 33
Fan Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Fan Module Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
iiiCopyright © 2015, Juniper Networks, Inc.
-
Chapter 4 Power System Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . 37
AC Power Supply for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
DC Power Supply for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Part 2 Site Planning, Preparation, and Specifications
Chapter 5 Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Site Preparation Checklist for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . 45
General Site Guidelines for an ACX Series Routers . . . . . . . . . . . . . . . . . . . . . . . . 46
Site Electrical Wiring Guidelines for an ACX Series Routers . . . . . . . . . . . . . . . . . . 47
Distance Limitations for Signaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Radio Frequency Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Environmental Requirements and Specifications for an ACX5000 Router . . . . . 48
Chassis Physical Specifications for an ACX5000 Router . . . . . . . . . . . . . . . . . . . 49
Rack Requirements for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Cabinet Requirements for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
ClearanceRequirements forAirflowandHardwareMaintenance foranACX5000
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Chapter 6 Power Specifications and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
AC Power Specifications for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . 53
AC Power Cord Specifications for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . 54
DC Power Specifications for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . 55
Chapter 7 Port and Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
USB Port Specifications for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Console Port Connector Pinouts for an ACX5000 Router . . . . . . . . . . . . . . . . . . . 58
Management Port Connector Pinouts for an ACX5000 Router . . . . . . . . . . . . . . 58
Interface Support for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
InterfaceSpecifications forSFP,SFP+, andQSFP+Transceivers for anACX5000
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Interface Specifications for SFP+ DAC Cables for an ACX5000 Router . . . . . . . . 77
Interface Specifications for QSFP+ DAC Breakout Cables for an ACX5000
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Interface Specifications for QSFP+ DAC Cables for an ACX5000 Router . . . . . . . 86
Chapter 8 Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Cable Specifications for QSFP+ and QSFP28 Transceivers . . . . . . . . . . . . . . . . . . 91
CableSpecifications forConsoleandManagementConnections foranACX5000
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Grounding Cable and Lug Specifications for an ACX5000 Router . . . . . . . . . . . . 93
Understanding Fiber-Optic Cable Signal Loss, Attenuation, andDispersion in an
ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Signal Loss in Multimode and Single-Mode Fiber-Optic Cables . . . . . . . . . . 94
Attenuation and Dispersion in Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . 95
Calculating Power Budget and Power Margin for Fiber-Optic Cables . . . . . . . . . . 95
Calculating Power Budget for Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . 96
Calculating Power Margin for Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . . 96
Copyright © 2015, Juniper Networks, Inc.iv
ACX5048 and ACX5096 Universal Access Router
-
Part 3 Initial Installation and Configuration
Chapter 9 Unpacking the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Unpacking an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Chapter 10 Installing the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Installing and Connecting an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Mounting an ACX5000 Router in a Rack or Cabinet . . . . . . . . . . . . . . . . . . . . . . . 104
Before You Begin Rack Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Four Post Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Two Post Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Chapter 11 Connecting the Router to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Connecting Earth Ground to an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . 112
Connecting AC Power to an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Connecting DC Power to an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Chapter 12 Connecting the Router to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Connecting an ACX5000 Router to a Management Console . . . . . . . . . . . . . . . . 121
Connecting an ACX5000 Router to a Network for Out-of-Band
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Chapter 13 Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Configuring an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Part 4 Installing, Maintaining, and Replacing Components
Chapter 14 Removing the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Powering Off an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Removing an ACX5000 Router from a Rack or Cabinet . . . . . . . . . . . . . . . . . . . . 131
Chapter 15 Replacing Cooling System Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Installing a Fan Module in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Removing a Fan Module from an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . 134
Chapter 16 Replacing Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Installing a Power Supply in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . 137
Removing a Power Supply from an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . 138
Chapter 17 Replacing Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Removing a Transceiver from an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . 141
Installing a Transceiver in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Chapter 18 Maintaining and Replacing Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . 145
Disconnecting a Fiber-Optic Cable from an ACX5000 Router . . . . . . . . . . . . . . . 145
Connecting a Fiber-Optic Cable to an ACX5000 Router . . . . . . . . . . . . . . . . . . . 146
Maintaining Fiber-Optic Cables in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . 147
Part 5 Contacting Customer Support and Returning the Chassis orComponents
Chapter 19 Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
vCopyright © 2015, Juniper Networks, Inc.
Table of Contents
-
Chapter 20 Locating Component Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Locating the Serial Number on an ACX5000 Router or Component . . . . . . . . . . 153
Listing the Chassis and Component Details Using the CLI . . . . . . . . . . . . . . 153
Locating the Chassis Serial Number ID Label on an ACX5000 Router . . . . . 154
Locating the Serial Number ID Labels on FRU Components . . . . . . . . . . . . . 155
Chapter 21 Packing and Returning Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Packing an ACX5000 Router or Component for Shipping . . . . . . . . . . . . . . . . . . 157
Packing an ACX5000 Router for Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Packing an ACX5000 Router Components for Shipping . . . . . . . . . . . . . . . . 158
Returning an ACX5000 Router or Component for Repair or Replacement . . . . . 158
Part 6 Troubleshooting
Chapter 22 Alarm Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Understanding the ACX5000 Router Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
ACX5000 Router Interface Alarm Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Part 7 Safety and Compliance Information
Chapter 23 General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
General Safety Guidelines for Juniper Networks Devices . . . . . . . . . . . . . . . . . . . 167
Definition of Safety Warning Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
General Safety Warnings for Juniper Networks Devices . . . . . . . . . . . . . . . . . . . . 170
Qualified Personnel Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Restricted Access Area Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Warning Statement for Norway and Sweden . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Chapter 24 Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Fire Safety Requirements for Juniper Networks Devices . . . . . . . . . . . . . . . . . . . . 173
General Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Fire Suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Fire Suppression Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Chapter 25 Radiation and Laser Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Laser Safety Warnings for Juniper Networks Devices . . . . . . . . . . . . . . . . . . . . . . 175
Class 1 Laser Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Class 1 LED Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Laser Beam Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . . . . . 177
Laser and LED Safety Guidelines and Warnings for the ACX Router . . . . . . . . . . 178
General Laser Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Class 1M Laser Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Class 1M Laser RadiationWarning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Class 1 Laser Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Class 1 LED Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Laser BeamWarning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Unterminated Fiber-Optic Cable Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Copyright © 2015, Juniper Networks, Inc.vi
ACX5048 and ACX5096 Universal Access Router
-
Chapter 26 Installation and Maintenance Safety Information . . . . . . . . . . . . . . . . . . . . 183
Maintenance and Operational Safety Warnings for Juniper Networks Devices . . 183
Battery Handling Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Jewelry Removal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Lightning Activity Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Operating Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Product Disposal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Chassis Lifting Guidelines for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . 188
Installation Safety Warnings for Juniper Networks Devices . . . . . . . . . . . . . . . . . 188
Intra-Building Ports Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Installation Instructions Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Rack-Mounting Requirements and Warnings . . . . . . . . . . . . . . . . . . . . . . . . 189
Ramp Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Chapter 27 Power and Electrical Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
General Electrical Safety Warnings for Juniper Networks Devices . . . . . . . . . . . . 195
Grounded Equipment Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Grounding Requirements and Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Midplane Energy Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Multiple Power Supplies Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . 197
Power Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Preventing Electrostatic Discharge Damage to an ACX5000 Router . . . . . . . . . 199
ACX5000 AC Power Electrical Safety Guidelines and Warnings . . . . . . . . . . . . 200
ACX5000 DC Power Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . 201
Chapter 28 Agency Approvals and Compliance Statements . . . . . . . . . . . . . . . . . . . . . 209
Agency Approvals for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Compliance Statements for EMC Requirements for the ACX5000 Router . . . . . 210
Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Israel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Korea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
United States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Nonregulatory Environmental Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
viiCopyright © 2015, Juniper Networks, Inc.
Table of Contents
-
Copyright © 2015, Juniper Networks, Inc.viii
ACX5048 and ACX5096 Universal Access Router
-
List of Figures
Part 1 Overview
Chapter 1 System Overview and Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 1: ACX5048 Port Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Figure 2: ACX5096 Port Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Figure 3: ACX5048 Interface Port Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 4: ACX5096 Interface Port Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2 Chassis Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 5: ACX5048, FRU End 1 U Product SKU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 6: ACX5096, FRU End 2 U Product SKU . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 7: Management Panel Components on ACX5048 . . . . . . . . . . . . . . . . . . . . 18
Figure 8: Management Panel Components on ACX5096 . . . . . . . . . . . . . . . . . . . . 19
Figure 9: ACX5048 Router Port Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 10: ACX5096 Router Port Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 11: Chassis Status LEDs on an ACX5000 Routers . . . . . . . . . . . . . . . . . . . . 23
Figure 12: Management Port LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . 25
Figure 13: Fan Module LED in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . 29
Figure 14: AC Power Supply LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . 30
Figure 15: DC Power Supply Faceplate on an ACX5000 Router . . . . . . . . . . . . . . . 31
Chapter 3 Cooling System Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 16: 1 U Fan Module Used in ACX5048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 17: 2 U Fan Module Used in ACX5096 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 18: Air Out Airflow Through 1 U ACX5048 Chassis . . . . . . . . . . . . . . . . . . . . 35
Figure 19: Air Out Airflow Through 2 U ACX5096 Chassis . . . . . . . . . . . . . . . . . . . 36
Chapter 4 Power System Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . 37
Figure 20: 1 U AC Power Supply in an ACX5048 . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 21: 2 U AC Power Supply in an ACX5096 . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 22: Power Supply Handle Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 23: DC Power Supply in ACX5048 Routers . . . . . . . . . . . . . . . . . . . . . . . . . 40
Figure 24: DC Power Supply for an ACX5096 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Figure 25: DC Power Supply Faceplate in ACX5000 Routers . . . . . . . . . . . . . . . . . 41
Part 2 Site Planning, Preparation, and Specifications
Chapter 5 Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure 26: Clearance Requirements for Airflow and Hardware Maintenance for
an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Chapter 7 Port and Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 27: Port Panel ACX5096 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
ixCopyright © 2015, Juniper Networks, Inc.
-
Figure 28: Port Panel ACX5048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Part 3 Initial Installation and Configuration
Chapter 10 Installing the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Figure 29: Attaching Mounting Rails to the ACX5048 Router . . . . . . . . . . . . . . . 106
Figure 30: Attaching Mounting Rails to the ACX5096 Router . . . . . . . . . . . . . . . 106
Figure 31: Attach 1 U Router to Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Figure 32: Slide Mounting Rail onto the ACX5096 Rear Mounting Blade . . . . . . . 107
Figure 33: Slide Mounting Blades into 1 U Mounting Rail . . . . . . . . . . . . . . . . . . . 108
Figure 34: Attaching a Two-Post Mounting Bracket to ACX5096 Router . . . . . . 108
Chapter 11 Connecting the Router to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Figure 35: Connecting a Grounding Cable to a 1 U ACX5048 . . . . . . . . . . . . . . . . . 113
Figure 36: Connecting a Grounding Cable to the 2 U ACX5096 . . . . . . . . . . . . . . 113
Figure 37: Connecting an AC Power Cord to an AC Power Supply in a 1 U
ACX5048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Figure 38: Connecting an AC Power Cord to an AC Power Supply in a 2 U
ACX5096 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Figure 39: DC Power Supply Faceplate for a ACX5000 Router . . . . . . . . . . . . . . . 119
Figure 40: Securing Ring Lugs to the Terminals on the ACX5000 DC Power
Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Chapter 12 Connecting the Router to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Figure 41: Connecting the ACX Router to a Management Console Through a
Console Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Figure 42: Connecting the ACX Router Directly to a Management Console . . . . . 122
Figure 43: Connecting a ACX5000 Router to a Network for Out-of-Band
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Part 4 Installing, Maintaining, and Replacing Components
Chapter 15 Replacing Cooling System Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Figure 44: Installing a Fan Module in a 1 U ACX5048 . . . . . . . . . . . . . . . . . . . . . . 134
Figure 45: Installing a Fan Module in a 2 U ACX5096 . . . . . . . . . . . . . . . . . . . . . . 134
Figure 46: Removing a Fan Module from a 1 U ACX5048 . . . . . . . . . . . . . . . . . . . 135
Figure 47: Removing a Fan Module from a 2 U ACX5096 . . . . . . . . . . . . . . . . . . . 135
Chapter 16 Replacing Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Figure 48: Installing Power Supply in an ACX5048 . . . . . . . . . . . . . . . . . . . . . . . . 138
Figure 49: Installing Power Supply in an ACX5096 . . . . . . . . . . . . . . . . . . . . . . . . 138
Figure 50: Removing Power Supply from an ACX5048 . . . . . . . . . . . . . . . . . . . . 140
Figure 51: Removing Power Supply from an ACX5096 . . . . . . . . . . . . . . . . . . . . . 140
Chapter 17 Replacing Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Figure 52: Installing an SFP Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Figure 53: Installing a QSFP+ Transceiver—Vertical Orientation . . . . . . . . . . . . . 144
Figure 54: Installing a QSFP+ Transceiver—Horizontal Orientation . . . . . . . . . . . 144
Copyright © 2015, Juniper Networks, Inc.x
ACX5048 and ACX5096 Universal Access Router
-
Part 5 Contacting Customer Support and Returning the Chassis orComponents
Chapter 20 Locating Component Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Figure 55: Location of the Serial Number ID Label on a ACX5096 . . . . . . . . . . . . 155
Figure 56: Location of the Serial Number ID Label on a ACX5048 . . . . . . . . . . . . 155
Part 7 Safety and Compliance Information
Chapter 27 Power and Electrical Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Figure 57: Placing a Component into an Antistatic Bag . . . . . . . . . . . . . . . . . . . . 199
xiCopyright © 2015, Juniper Networks, Inc.
List of Figures
-
Copyright © 2015, Juniper Networks, Inc.xii
ACX5048 and ACX5096 Universal Access Router
-
List of Tables
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Part 1 Overview
Chapter 1 System Overview and Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 3: ACX5000 Router Model Numbers and Description . . . . . . . . . . . . . . . . . . 5
Table 4: FRUs in ACX5000 Routers and Action Required Before Removing
Them . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 5: CLI Equivalents of Terms Used in Documentation for an ACX5048
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 6: CLI Equivalents of Terms Used in Documentation for an ACX5096
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 7: Protocols and Applications Supported by ACX Series Routers . . . . . . . . . 10
Chapter 2 Chassis Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Table 8: Chassis Status LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . 24
Table 9: Management Port LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . 25
Table 10: ACX5000 Access Port and Uplink LED Locations . . . . . . . . . . . . . . . . . . 27
Table 11: Network Port LEDs on SFP+ Ports on an ACX5000 Router . . . . . . . . . . . 27
Table 12: Network Port LEDs on QSFP+ Ports on an ACX5000 Router . . . . . . . . . 28
Table 13: Fan Tray LED in an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 14: AC Power Supply LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . 30
Table 15: DC Power Supply LEDs on an ACX5000 Router . . . . . . . . . . . . . . . . . . . . 31
Chapter 3 Cooling System Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . 33
Table 16: Fan Module in ACX5000 Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Table 17: Fan Module LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Chapter 4 Power System Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . 37
Table 18: Airflow Direction in an ACX5000 AC Power Supplies . . . . . . . . . . . . . . . 39
Table 19: Airflow Direction in ACX5000 DC Power Supplies . . . . . . . . . . . . . . . . . . 41
Part 2 Site Planning, Preparation, and Specifications
Chapter 5 Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Table 20: Site Preparation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Table 21: ACX5000 Router Environmental Tolerances . . . . . . . . . . . . . . . . . . . . . . 48
Table 22: Physical Specifications for an ACX5000 Router Chassis . . . . . . . . . . . . 49
Table 23: Rack Requirements for an ACX5000 Router . . . . . . . . . . . . . . . . . . . . . 50
Table 24: Cabinet Requirements for an ACX5000 Router . . . . . . . . . . . . . . . . . . . 51
xiiiCopyright © 2015, Juniper Networks, Inc.
-
Chapter 6 Power Specifications and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Table 25: AC Power Specifications for an ACX5000 Router . . . . . . . . . . . . . . . . . 53
Table 26: AC Power Cord Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Table 27: DC Power Specifications for an ACX5000 Router . . . . . . . . . . . . . . . . . 55
Chapter 7 Port and Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Table 28: Console Port Connector Pinouts for an ACX5000 Router . . . . . . . . . . . 58
Table 29: RJ-45 Management Port Connector Pinouts for an ACX5000
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Table 30: Supported Optical Transceivers for an ACX5000 Router . . . . . . . . . . . 60
Table 31: Optics being qualified for ACX5048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Table 32: Supported DAC and DAC Breakout Cables for the ACX5000
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Table 33: Copper Interface Support and Optical Interface Support for
Gigabit Ethernet SFP Transceivers for ACX5000 Routers . . . . . . . . . . . . . . . 63
Table 34: Optical Interface Support for 10-Gigabit Ethernet SFP+ Transceivers
for ACX5000 Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Table 35: Interface Support for 40-Gigabit Ethernet QSFP+ Transceivers for
ACX5000 Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 36: Third-Party SFP+ DAC Cable Support . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Table 37: SFP+ Passive Direct Attach Copper Cable Specifications . . . . . . . . . . . 78
Table 38: SFP+ Active Direct Attach Copper Cable Specifications . . . . . . . . . . . . 80
Table 39: Third-Party QSFP+ DAC Breakout Cable Support . . . . . . . . . . . . . . . . . 83
Table 40: QSFP+ DAC Passive Breakout Cable Specifications . . . . . . . . . . . . . . . 83
Table 41: QSFP+ Active DAC Breakout Cable Specifications . . . . . . . . . . . . . . . . . 85
Table 42: Third-Party QSFP+ DAC Cable Support . . . . . . . . . . . . . . . . . . . . . . . . . 86
Table 43: Interface Specifications for Passive Copper QSFP+ DAC Cables . . . . . . 87
Table 44: Interface Specifications for Active Copper QSFP+ DAC Cables . . . . . . 89
Chapter 8 Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Table 45: QSFP+ MPO Cable Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Table 46: QSFP+ MPO Fiber-Optic Crossover Cable Pinouts . . . . . . . . . . . . . . . . 92
Table 47: Cable Specifications for Console and Management Connections for
the ACX5000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Table 48: Estimated Values for Factors Causing Link Loss . . . . . . . . . . . . . . . . . . 96
Part 3 Initial Installation and Configuration
Chapter 9 Unpacking the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Table 49: Inventory of Components Supplied with an ACX5000 Router . . . . . . 102
Part 6 Troubleshooting
Chapter 22 Alarm Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Table 50: Alarm Terms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Copyright © 2015, Juniper Networks, Inc.xiv
ACX5048 and ACX5096 Universal Access Router
-
About the Documentation
• Documentation and Release Notes on page xv
• Documentation Conventions on page xv
• Documentation Feedback on page xvii
• Requesting Technical Support on page xviii
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation,
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at http://www.juniper.net/books.
Documentation Conventions
Table 1 on page xvi defines notice icons used in this guide.
xvCopyright © 2015, Juniper Networks, Inc.
http://www.juniper.net/techpubs/http://www.juniper.net/books
-
Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page xvi defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type theconfigure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on theterminal screen.
Fixed-width text like this
• A policy term is a named structurethat defines match conditions andactions.
• Junos OS CLI User Guide
• RFC 1997,BGPCommunities Attribute
• Introduces or emphasizes importantnew terms.
• Identifies guide names.
• Identifies RFC and Internet draft titles.
Italic text like this
Configure themachine’s domain name:
[edit]root@# set system domain-namedomain-name
Represents variables (options for whichyou substitute a value) in commands orconfiguration statements.
Italic text like this
Copyright © 2015, Juniper Networks, Inc.xvi
ACX5048 and ACX5096 Universal Access Router
-
Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
• To configure a stub area, include thestub statement at the [edit protocolsospf area area-id] hierarchy level.
• Theconsoleport is labeledCONSOLE.
Represents names of configurationstatements, commands, files, anddirectories; configurationhierarchy levels;or labels on routing platformcomponents.
Text like this
stub ;Encloses optional keywords or variables.< > (angle brackets)
broadcast | multicast
(string1 | string2 | string3)
Indicates a choice between themutuallyexclusive keywords or variables on eitherside of the symbol. The set of choices isoften enclosed in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamicMPLS onlyIndicates a comment specified on thesame lineas theconfiguration statementto which it applies.
# (pound sign)
community namemembers [community-ids ]
Encloses a variable for which you cansubstitute one or more values.
[ ] (square brackets)
[edit]routing-options {static {route default {nexthop address;retain;
}}
}
Identifies a level in the configurationhierarchy.
Indention and braces ( { } )
Identifies a leaf statement at aconfiguration hierarchy level.
; (semicolon)
GUI Conventions
• In the Logical Interfaces box, selectAll Interfaces.
• To cancel the configuration, clickCancel.
Representsgraphicaluser interface(GUI)items you click or select.
Bold text like this
In the configuration editor hierarchy,select Protocols>Ospf.
Separates levels in a hierarchy of menuselections.
> (bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can provide feedback by using either of the following
methods:
• Online feedback rating system—On any page at the Juniper Networks Technical
Documentation site at http://www.juniper.net/techpubs/index.html, simply click the
stars to rate the content, anduse thepop-up form toprovideuswith informationabout
your experience. Alternately, you can use the online feedback form at
https://www.juniper.net/cgi-bin/docbugreport/.
xviiCopyright © 2015, Juniper Networks, Inc.
About the Documentation
http://www.juniper.net/techpubs/index.htmlhttps://www.juniper.net/cgi-bin/docbugreport/
-
• E-mail—Sendyourcommentsto [email protected]. Includethedocument
or topic name, URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the JuniperNetworksTechnicalAssistance
Center (JTAC). If you are a customer with an active J-Care or Partner Support Service
support contract, or are covered under warranty, and need post-sales technical support,
you can access our tools and resources online or open a case with JTAC.
• JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
• Product warranties—For product warranty information, visit
http://www.juniper.net/support/warranty/.
• JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides youwith the
following features:
• Find CSC offerings: http://www.juniper.net/customers/support/
• Search for known bugs: http://www2.juniper.net/kb/
• Find product documentation: http://www.juniper.net/techpubs/
• Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/
• Download the latest versions of software and review release notes:
http://www.juniper.net/customers/csc/software/
• Search technical bulletins for relevant hardware and software notifications:
http://kb.juniper.net/InfoCenter/
• Join and participate in the Juniper Networks Community Forum:
http://www.juniper.net/company/communities/
• Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/
Toverify serviceentitlementbyproduct serial number, useourSerialNumberEntitlement
(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/
Opening a Casewith JTAC
You can open a case with JTAC on theWeb or by telephone.
• Use the Case Management tool in the CSC at http://www.juniper.net/cm/.
• Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
Copyright © 2015, Juniper Networks, Inc.xviii
ACX5048 and ACX5096 Universal Access Router
mailto:[email protected]?subject=http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdfhttp://www.juniper.net/support/warranty/http://www.juniper.net/customers/support/http://www2.juniper.net/kb/http://www.juniper.net/techpubs/http://kb.juniper.net/http://www.juniper.net/customers/csc/software/http://kb.juniper.net/InfoCenter/http://www.juniper.net/company/communities/http://www.juniper.net/cm/https://tools.juniper.net/SerialNumberEntitlementSearch/http://www.juniper.net/cm/
-
For international or direct-dial options in countries without toll-free numbers, see
http://www.juniper.net/support/requesting-support.html.
xixCopyright © 2015, Juniper Networks, Inc.
About the Documentation
http://www.juniper.net/support/requesting-support.html
-
Copyright © 2015, Juniper Networks, Inc.xx
ACX5048 and ACX5096 Universal Access Router
-
PART 1
Overview
• SystemOverview and Architecture on page 3
• Chassis Components and Descriptions on page 17
• Cooling System Components and Descriptions on page 33
• Power System Components and Descriptions on page 37
1Copyright © 2015, Juniper Networks, Inc.
-
Copyright © 2015, Juniper Networks, Inc.2
ACX5048 and ACX5096 Universal Access Router
-
CHAPTER 1
System Overview and Architecture
• ACX5000 Universal Access Router Overview on page 3
• ACX5000 Router Models on page 5
• Field-Replaceable Units in an ACX5000 Router on page 5
• Understanding Hardware Redundancy of an ACX5000 Router Components and
Functionality on page 6
• ACX5000 Routers Hardware and CLI Terminology Mapping on page 7
• ACX5000 System Software Overview on page 10
• Protocols and Applications Supported by the ACX Routers on page 10
ACX5000Universal Access Router Overview
TheACX5000UniversalAccessRoutersare JuniperNetworks’ top-of-rack router solutions
for data centers and campus distribution or aggregation environments. The ACX5000
router portfolio consists of high-performance fixed-configuration routers that add higher
port densities, additional scalability, and improved latency to the ACX Series. The
ACX5000 routers are available in twomodels—ACX5048andACX5096. See “ACX5000
Router Models” on page 5.
ACX5000 routers offer a compact 1 Umodel and a 2 Umodel that provide wire-speed
packet performance, very low latency, and a rich set of Layer 2 and Layer 3 features.
These routers have a high-throughput Packet Forwarding Engine, and the performance
of the control plane running on ACX5000 routers is enhanced by the 1.5 Ghz dual-core
Intel CPUwith 8 GB of memory and 32 GB of solid-state drive (SSD) storage.
The ACX5000 routers include both 10-Gigabit Ethernet and 40-Gigabit Ethernet fixed
configurations.
The ACX5000 router consists of:
• ACX5048 Router on page 3
• ACX5096 Router on page 4
ACX5048 Router
As shown in Figure 1 on page 4, the ACX5048 is a 10-Gigabit Ethernet enhanced small
form-factor pluggable (SFP+) top-of-rack router with 48 SFP+ ports and 6 quad SFP+
3Copyright © 2015, Juniper Networks, Inc.
-
(QSFP+) ports. Each SFP+ port can operate as a native 10-Gigabit Ethernet port or as a
1-Gigabit Ethernet port when 1-gigabit optics are inserted. EachQSFP+ port (48 through
53) can operate as a 40-Gigabit Ethernet port or be channelized to operate as four
independent 10-Gigabit Ethernet ports (a total of 24 10-Gigabit Ethernet ports). The
6QSFP+ports canbe used as either access ports or uplink ports. TheACX5048provides
full duplex throughput of 1.44 Tbps. The ACX5048 has a 1 U form factor and is shipped
with redundant fans and redundant power supplies. The router can be ordered with
front-to-back airflow (air out or AFO) and with AC or DC power supplies.
Figure 1: ACX5048 Port Panel
g000
810
ACX5048 can be used only as a standalone router.
ACX5096 Router
As shown in Figure 2 on page 4, the ACX5096 is a is a 10-Gigabit Ethernet enhanced
small form-factor pluggable (SFP+) top-of-rack router with 96 SFP+ ports and 8 quad
SFP+(QSFP+)ports. EachSFP+port canoperateasanative 10-Gbpsport or asa 1-Gbps
port. The QSFP+ ports 96 and 100 can operate at native 40 Gbps speed or can be
channelized to 4 independent 10 Gbps port speeds. The 8 QSFP+ ports can be used as
either access ports or as uplinks. The ACX5096 has a 2U form factor and is shippedwith
redundant fans and redundant power supplies. The router can be ordered with
front-to-back airflow (air out or AFO) and with AC or DC power supplies.
Figure 2: ACX5096 Port Panel
ACX5096 can be used only as a standalone router.
RelatedDocumentation
ACX5000 Router Models on page 5•
• ACX5000 System Software Overview on page 10
• Protocols and Applications Supported by the ACX Routers on page 10
Copyright © 2015, Juniper Networks, Inc.4
ACX5048 and ACX5096 Universal Access Router
-
ACX5000 Router Models
The ACX5000 routers come in twomodel, one with have 48 port configuration and the
otherwith 96port configurations. All the routers are availablewith either ACorDCpower
supplyandwithairflow-out (AFO)cooling.AFO isalsosometimesknownas front-to-back
cooling.
Table 3 on page 5 lists the ordering numbers for ACX5000 routers.
Table 3: ACX5000 Router Model Numbers and Description
Airflow
NumberofManagementPorts
PowerSupplyPortsModel Number
AirOut (front-to-back)3AC48 SFP+ and 6 QSFP+transceivers
ACX5048-AC
AirOut (front-to-back)3DC48 SFP+ and 6 QSFP+transceivers
ACX5048-DC
AirOut (front-to-back)2AC96 SFP+ and 8 QSFP+transceivers
ACX5096-AC
AirOut (front-to-back)2DC96 SFP+ and 8 QSFP+transceivers
ACX5096-DC
CAUTION: Do notmix different types (AC and DC) of power supplies in thesame chassis.
RelatedDocumentation
ACX5000 Universal Access Router Overview on page 3•
Field-Replaceable Units in an ACX5000 Router
Field-replaceable units (FRUs) are components that you can replace at your site. The
ACX5000 FRUs are hot-insertable and hot-removable: you can remove and replace
themwithout powering off the router or disrupting the routing function.
The following are the ACX5000 FRUs:
• Power supplies
• Fanmodules
Table 4 on page 6 lists the FRUs for the ACX5000 and actions to take before removing
them.
5Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SystemOverview and Architecture
-
Table 4: FRUs in ACX5000 Routers and Action Required Before Removing Them
Required ActionFRUs
NonePower supplies
NoneFanmodules
CAUTION: Replace a failed power supply with a blank panel or new powersupply within oneminute of removal to prevent chassis overheating. Therouter continues to operate with only one power supply running. Replace afailed fanmodule with a new fanmodule within oneminute of removal toprevent chassis overheating. Do not operate the router withmissing FRUsfor longer than oneminute.
NOTE: If you have a Juniper J-Care service contract, register any addition,change, or upgrade of hardware components athttps://www.juniper.net/customers/csc/management/updateinstallbase.jsp .
Failure to do so can result in significant delays if you need replacement parts.This note does not apply if you replace existing components with the sametype of component.
NOTE: Before removing the optical transceivers, we recommend that youdisable the interface using the set interfaces interface-name disablecommand.See“DisconnectingaFiber-OpticCable fromanACX5000Router”on page 145.
RelatedDocumentation
Installing a Power Supply in an ACX5000 Router on page 137•
• Removing a Power Supply from an ACX5000 Router on page 138
• Installing a Fan Module in an ACX5000 Router on page 133
• Removing a Fan Module from an ACX5000 Router on page 134
Understanding Hardware Redundancy of an ACX5000 Router Components andFunctionality
The following hardware components provide redundancy on an ACX5000 router:
• Power supplies—The ACX5000 router has one or two power supplies. Each power
supply provides power to all components in the router. If two power supplies are
installed, the two power supplies provide full power redundancy to the device. If one
power supply fails or is removed, the second power supply balances the electrical load
without interruption.
Copyright © 2015, Juniper Networks, Inc.6
ACX5048 and ACX5096 Universal Access Router
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
-
To provide power redundancy to the system both power supplies must be installed.
Connect power source feed A to one power supply and power source feed B to the
second power supply.
CAUTION: Do not connect feed A and feed B to the same power supplyinput terminal.
• Cooling system—The 1 U ACX5048 router has five fanmodules; the 2 U ACX5096
router has three fanmodules. If a fanmodule fails and is unable to keep the ACX5000
router within the desired temperature thresholds, chassis alarms occur and the
ACX5000 router can shut down.
RelatedDocumentation
AC Power Supply for an ACX5000 Router on page 37•
• DC Power Supply for an ACX5000 Router on page 39
• Cooling System and Airflow in an ACX5000 Router on page 33
ACX5000 Routers Hardware and CLI TerminologyMapping
• ACX5048 Router Hardware and CLI Terminology Mapping on page 7
• ACX5096 Router Hardware and CLI Terminology Mapping on page 8
ACX5048 Router Hardware and CLI TerminologyMapping
Table 5 on page 7 describes the hardware terms used in an ACX5048 router
documentationandthecorresponding termsused in the JunosOScommand line interface
(CLI). Figure 3 on page 8 shows the port locations of the interfaces.
Table 5: CLI Equivalents of Terms Used in Documentation for an ACX5048 Router
Additional InformationItem in DocumentationValue (as displayedin the CLI)
Description (asdisplayed in theCLI)
HardwareItem (asdisplayed inthe CLI)
“Chassis Physical Specificationsfor an ACX5000 Router” onpage 49
Router chassis–ACX5048Chassis
Interface Naming ConventionsUsed in the Junos OS OperationalCommands
The router does not haveactual FPCs. In this case,FPC refers to the routeritself.
Value of n is always0.
Abbreviated name ofthe Flexible PICConcentrator (FPC)
FPC (n)
Interface Naming ConventionsUsed in the Junos OS OperationalCommands
The router does not haveactual PIC devices; seeentries for PIC 0 for theequivalent item on therouter.
Value of n is always0.
Abbreviated name ofthePhysical InterfaceCard (PIC)
PIC (n)
7Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SystemOverview and Architecture
-
Table 5: CLI Equivalents of Terms Used in Documentation for an ACX5048 Router (continued)
Additional InformationItem in DocumentationValue (as displayedin the CLI)
Description (asdisplayed in theCLI)
HardwareItem (asdisplayed inthe CLI)
“ACX5000 Universal AccessRouter Overview” on page 3
Built-in network ports onthe front panel of therouter
PIC 048x10G–6x40G
Port and Interface SpecificationsOptical transceiversn is a valueequivalent to thenumber of the port inwhich the transceiveris installed.
Abbreviated name ofthe transceiver
Xcvr (n)
“AC Power Supply for anACX5000 Router” on page 37
“DC Power Supply for anACX5000 Router” on page 39
AC power supply
DC power supply
n is a value in therange of 0-1.
Power supplyPowersupply (n)
“Cooling System and Airflow inan ACX5000 Router” on page 33
Fann is a value in therange of 0-4.
FanFan
Figure 3: ACX5048 Interface Port Mapping
g000
80
9
1 2 3
3—1— 40 Gigabit Ethernet ports (6)Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (48)
ACX5096 Router Hardware and CLI TerminologyMapping
Table 6 on page 8 describes the hardware terms used in an ACX5096 router
documentationandthecorresponding termsused in the JunosOScommand line interface
(CLI). Figure 4 on page 9 shows the port locations of the interfaces.
Table 6: CLI Equivalents of Terms Used in Documentation for an ACX5096 Router
Additional InformationItem in DocumentationValue (as displayedin the CLI)
Description (asdisplayed in theCLI)
HardwareItem (asdisplayed inthe CLI)
“Chassis Physical Specificationsfor an ACX5000 Router” onpage 49
Router chassis–ACX5096Chassis
Copyright © 2015, Juniper Networks, Inc.8
ACX5048 and ACX5096 Universal Access Router
-
Table 6: CLI Equivalents of Terms Used in Documentation for an ACX5096Router (continued)
Additional InformationItem in DocumentationValue (as displayedin the CLI)
Description (asdisplayed in theCLI)
HardwareItem (asdisplayed inthe CLI)
Interface Naming ConventionsUsed in the Junos OSOperationalCommands
The router does not haveactual FPCs. In this case,FPC refers to the routeritself.
Value of n is always 0.Abbreviated name ofthe Flexible PICConcentrator (FPC)
FPC (n)
Interface Naming ConventionsUsed in the Junos OSOperationalCommands
The router does not haveactual PIC devices; seeentries for PIC 0 for theequivalent item on therouter.
Value of n is always 0.Abbreviated name ofthePhysical InterfaceCard (PIC)
PIC (n)
“ACX5000 Universal AccessRouter Overview” on page 3
Built-in network ports onthe front panel of therouter
PIC 096x10G–8x40G
Port and Interface SpecificationsOptical transceiversn is a value equivalentto the number of theport in which thetransceiver isinstalled.
Abbreviated name ofthe transceiver
Xcvr (n)
“AC Power Supply for anACX5000 Router” on page 37
“DC Power Supply for anACX5000 Router” on page 39
AC power supply
DC power supply
n is a value in therange of 0-1.
Built-in power supplyPowersupply (n)
“Cooling System and Airflow inanACX5000Router” on page 33
Fann is a value in therange of 0-2 forACX5096
FanFan
Figure 4: ACX5096 Interface Port Mapping
3—1— 40 Gigabit Ethernet ports (8)Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (96)
RelatedDocumentation
ACX5000 Universal Access Router Overview on page 3•
9Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SystemOverview and Architecture
-
ACX5000 SystemSoftware Overview
ACX5000 routers use the Junos operating system (OS), which provides Layer 2 and
Layer 3 switching, routing, and security services. Junos OS is installed on an ACX5000
router’s 32-gigabyte (GB) internal solid state flash drive. The same Junos OS code base
that runs on an ACX5000 routers also runs on all Juniper Networks QFX and EX Series
switches, and J Series, M Series, MX Series, ACX Series and T Series routers.
For more information about which features are supported on an ACX5000 routers, see
“Protocols and Applications Supported by the ACX Routers” on page 10.
Youmanage the router using the Junos OS command-line interface (CLI), accessible
through the console and out-of-bandmanagement ports on the router.
Protocols and Applications Supported by the ACX Routers
Supported Platforms ACX Series
Table 7 on page 10 contains the first Junos OS Release support for protocols and
applications on ACX routers. A dash indicates that the protocol or application is not
supported.
NOTE: The [edit logical-systems logical-system-name] hierarchy level is not
supported on ACX Series routers.
Table 7: Protocols and Applications Supported by ACX Series Routers
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
Interface andEncapsulation Types
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Ethernetinterfaces—1/100/1000, 1G,10G
15.1X54–D2015.1X54–D20–––––Ethernet interfaces—40G
–––12.2R212.212.2R212.2ATM interfaces (IMA only)
–––12.2R212.212.2R212.2E1 interfaces
–––12.2R212.212.2R212.2T1 interfaces
––12.3x51-D1012.2R212.212.2R212.2Circuit emulation interfaces(SAToP)
––12.3x51-D10(requires aMIC)
SONET/SDH interfaces
Copyright © 2015, Juniper Networks, Inc.10
ACX5048 and ACX5096 Universal Access Router
http://www.juniper.net/techpubs/en_US/release-independent/junos/information-products/pathway-pages/acx-series/
-
Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
Layer 3
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Static routes
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2OSPF
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IS-IS
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2BGP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Internet Control MessageProtocol (ICMP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Address ResolutionProtocol (ARP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Bidirectional ForwardingDetection (BFD) protocol
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Dynamic HostConfiguration Protocol(DHCP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IP fast reroute (FRR)(OSPF, IS-IS)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Maximumtransmissionunit(MTU) 1518
15.1X54–D2015.1X54–D2012.3x51-D1012.3R112.3R112.3R112.3R1Layer 3 VPNs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2RSVP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2LDP (targeted and direct)
MPLS, VPLS, VPNs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Static label-switched path(LSP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2FRR
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Traffic engineering
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2E-LINE
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Pseudowire EmulationEdge to Edge (PWE3[signaled])
11Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SystemOverview and Architecture
-
Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Static Ethernet PWs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Layer 2 circuits
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IEE802.1ag CCmonitoringon active and standbypseudowires
15.1X54–D2015.1X54–D20–––––VPLS
Ethernet Layer 2
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Ethernet in the first mile(EFM 802.3ah)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2802.1ag connectivity faultmanagement (CFM)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IEE802.1ag interface-statustype, length, and value(TLV)
QoS
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Firewall filters (accesscontrol lists—ACLs)—familyinet
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Standard firewall filtermatch conditions for MPLStraffic
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Firewall filters—familyccc/any
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Policing—per logicalinterface
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Policing—per physicalinterface
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Policing—per family
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2TrTCM (color aware, colorblind)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2SrTCM (color aware, colorblind)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Host protection
Copyright © 2015, Juniper Networks, Inc.12
ACX5048 and ACX5096 Universal Access Router
-
Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Eight queues per port
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Priority queuing
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Rate control
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Scheduling with twodifferent priorities
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Low-latency queue (LLQ)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Weighted random earlydetection (WRED) dropprofile (DP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Classification—DSCP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Classification—MPLS EXP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Classification—IEEE802.1p
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Rewrite—DSCP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Rewrite MPLS EXP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Rewrite 802.1p
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2RewriteMPLSandDSCPtodifferent values
Timing
––12.3x51-D1012.2R212.212.2R212.2Timing-1588-v2,1588-2008–backup clock
––12.3x51-D1012.2R212.212.2R212.2Synchronous Ethernet
––12.3x51-D1012.2R212.212.2R212.2Building-integrated timingsupply (BITS)
––12.3x51-D1012.2R212.212.2R212.2Clock synchronization
–––––––Redundant clock (multiple1588masters)
15.1X54-D2015.1X54-D20–––––Transparent clock
OAM, Troubleshooting, Manageability, Lawful Intercept
13Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SystemOverview and Architecture
-
Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Network Time Protocol(NTP)
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2SNMP
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2802.1ag CFM
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2802.3ah LFM
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Y.1731 Fault andPerformanceManagement
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2MPLS OAM
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2RMON
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Layer 2 traceroute
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2DNS
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2TFTP for softwaredownloads
––12.3x51-D1012.2R212.212.2R212.2Port mirroring (local portmirroring)
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Interface loopback
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Interface byte and packetstats
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Interface queue stats
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Drop packet stats
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Distinguish each 802.1agconnection by VLAN-ID
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Interfacepassive-monitor-mode
–––––––Multipacket mirror
Security
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2TACACS AAA
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2RADIUS authentication
Copyright © 2015, Juniper Networks, Inc.14
ACX5048 and ACX5096 Universal Access Router
-
Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2Control plane DOSprevention
High Availability
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2MPLS FRR
15.1X54-D2015.1X54-D2012.3x51-D1012.2R212.212.2R212.2BFD
ATMTransport
––12.3x51-D1012.2R212.212.2R212.2ATM over PWE3
––12.3x51-D1012.2R212.212.2R212.2RFC4717 ATMencapsulation: S6.1 ATM Nto one cell mode (requiredas per standard)
––12.3x51-D1012.2R212.212.2R212.2RFC4717: S6.3—ATM AAL5SDU encapsulation(optional)
––12.3x51-D1012.2R212.212.2R212.2ATM PWE3 control word
––12.3x51-D1012.2R212.212.2R212.2ATM PWE3 bymeans ofdynamic labels
––12.3x51-D1012.2R212.212.2R212.2ATM VPI/VCI swapping
––12.3x51-D1012.2R212.212.2R212.2ATM idle/unassigned cellsuppression
––12.3x51-D1012.2R212.212.2R212.2ATM support for N to 1 PWpromiscuous mode: 1 PWper port and 1 PW per VPI
––12.3x51-D1012.2R212.212.2R212.2Cell concatenation (1 to 30cells per packet)
––12.3x51-D1012.2R212.212.2R212.2Packet/byte counters perVP and VC
––12.3x51-D1012.2R212.212.2R212.2Inverse multiplexing overATM (IMA)
ATM Encapsulation
––12.3x51-D1012.2R212.212.2R212.2AAL5 SDU (n-to-1 cellrelay)
ATMQueuing
15Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SystemOverview and Architecture
-
Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
––12.3x51-D1012.2R212.212.2R212.2ATM service categories(CBR,nrt-VBR,UBR) to theUNI
––12.3x51-D1012.2R212.212.2R212.2MAP ATM servicecategories to PW EXP bits
––12.3x51-D1012.2R212.212.2R212.2Input policing per VC
––12.3x51-D1012.2R212.212.2R212.2VC output shaping
––12.3x51-D1012.2R212.212.2R212.2Early packet discard
MIBs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Standard SNMPMIBs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Juniper Networksenterprise-specific MIBs
TDMPseudowire
––12.3x51-D1012.2R212.212.2R212.2Structure-Agnostic TDMover Packet (SAToP)
Copyright © 2015, Juniper Networks, Inc.16
ACX5048 and ACX5096 Universal Access Router
-
CHAPTER 2
Chassis Components and Descriptions
• Management Panel of an ACX5000 Router on page 17
• Port Panel of an ACX5048 Router on page 20
• Port Panel of an ACX5096 Router on page 21
• Chassis Status LEDs on an ACX5000 Router on page 23
• Management Port LEDs on an ACX5000 Router on page 24
• Access Port and Uplink Port LEDs on an ACX5000 Router on page 26
• Fan Module LED on an ACX5000 Router on page 29
• AC Power Supply LEDs on an ACX5000 Router on page 29
• DC Power Supply LEDs on an ACX5000 Router on page 31
Management Panel of an ACX5000 Router
Themanagement panel of the ACX5000 router is found on the Field Replaceable Unit
(FRU) end of the router as shown in Figure 5 on page 17 for 1 U ACX5048 router and
Figure 6 on page 18 for the 2 U ACX5096 router.
See Figure 7 on page 18 and Figure 8 on page 19 for FRUs andmanagement panel detail.
Figure 5: ACX5048, FRU End 1 U Product SKU
3—1— Power supply unitsManagement panel
2—Fanmodules
17Copyright © 2015, Juniper Networks, Inc.
-
Figure 6: ACX5096, FRU End 2 U Product SKU
Figure 7: Management Panel Components on ACX5048
4—1— RJ-45 console port (CON) )Status LEDs
5—2— USB portem1–SFPmanagement Ethernet port (C1)Cage (socket for either 1 GbE copper SFP orfiber SFP)
3—em0–RJ-45 (1000 Base-T) managementEthernet port (C0)Some SKUs have an additional SFPmanagement Ethernet port (secondC0)
Copyright © 2015, Juniper Networks, Inc.18
ACX5048 and ACX5096 Universal Access Router
-
Figure 8: Management Panel Components on ACX5096
4—1— RJ-45 console port (C0N) )Status LEDs
5—2— USB portem1–SFPmanagement Ethernet port (C1)Cage (socket for either 1 GbE copper SFP orfiber SFP)
3—em0–RJ-45 (1000 Base-T) managementEthernet port (C0)
Themanagement panel consists of the following components:
• Status LEDs
• ALM–Alarm
• Unlit indicates the router is halted or that there is no alarm.
• Red indicates a hardware fault, such as a power failure or a system shutdown due
to system over-heating.
• Amber indicates amajor or minor alarm.
• SYS–System
• Unlit indicates the router is powered off or halted.
• Solid green indicates that Junos OS for ACX Series is loaded on the router.
• ID–Identification or beacon
• Unlit indicates the beacon feature is not enabled.
• Blinking blue indicates the beacon feature is enabled. This feature is enabled using
the request chassis beacon command.
• Router product number
• Management Ports C0 and C1
19Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions
-
• C0–Use theRJ-45connectors for 10/100/1000BaseT.See “ConnectinganACX5000
Router to a Network for Out-of-Band Management” on page 122.
• C1–Use the SFP connector for 1000 BaseX.
• USB port for image updates.
• Console port (RJ-45) to support RS-232 serial ports.
RelatedDocumentation
Field-Replaceable Units in an ACX5000 Router on page 5•
• Chassis Status LEDs on an ACX5000 Router on page 23
• USB Port Specifications for an ACX5000 Router on page 57
• Connecting an ACX5000 Router to a Management Console on page 121
• ConnectinganACX5000Router toaNetwork forOut-of-BandManagementonpage122
Port Panel of an ACX5048 Router
The port panel of the ACX5048 supports up to amaximum of 72 logical 10 GbE ports
when operating as a standalone router. Forty-eight physical ports(0 through 47) support
10 Gbps small form-factor pluggable plus (SFP+) transceivers. These ports can be
configured as access ports. See “Interface Specifications for SFP, SFP+, and QSFP+
Transceivers for an ACX5000Router” on page 62 and “Interface Specifications for SFP+
DAC Cables for an ACX5000 Router” on page 77. All 48 of these ports can be used for
SFP+ transceivers or SFP+ direct attach copper (DAC) cables. You can use 1-Gigabit
Ethernet SFP, 10-Gigabit Ethernet SFP+ transceivers and SFP+ direct attach copper
cables in any access port.
The remaining 24 logical ports are available for six 40 GbE ports (48 through 53) that
support up to six quad small-form factor pluggableplus (QSFP+) transceivers orQSFP+.
Each QSFP+ socket can operate either as a single 40 Gbps port or as a set of 4
independent 10 Ggps ports using QSFP+ breakout cables. The 40 GbE ports can be
configured as either access ports or as uplinks. See “Interface Specifications for QSFP+
DAC Breakout Cables for an ACX5000 Router” on page 82.
CAUTION: Donot place a copper transceiver in an access port directly aboveor below another copper transceiver. Internal damage to the access portsand router canoccur.We recommendeitherusing the topport rowexclusively,or bottom port row exclusively, for copper transceivers.
Figure 9 on page 21 shows the port panel of a ACX5048 router.
Copyright © 2015, Juniper Networks, Inc.20
ACX5048 and ACX5096 Universal Access Router
-
Figure 9: ACX5048 Router Port Panel
g000
80
9
1 2 3
3—1— 40 Gigabit Ethernet ports (6)Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (48)
RelatedDocumentation
Access Port and Uplink Port LEDs on an ACX5000 Router on page 26•
Port Panel of an ACX5096 Router
The port panel of the ACX5096 router consists of 96 small form-factor pluggable plus
(SFP+) and 8 quad small-form factor pluggable plus (QSFP+) ports. Physical ports(0
through 95) support 10 Gbps SFP+ transceivers and normally are configured as access
ports. The eight 40-Gigabit ports (96 through 103) support QSFP+ transceivers and are
normally configuredasuplinks orVirtual Chassis ports (VCPs). Although the 104physical
ports of the ACX5096would map to 128 logical ports using channelization, only 104
logical ports are supported.
Figure 10 on page 21 shows the port panel of a ACX5096 router.
Figure 10: ACX5096 Router Port Panel
3—1— 40 Gigabit Ethernet ports (8)Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (96)
This topic describes:
• Router Ports on page 21
• Channelizing Interfaces on page 22
Router Ports
The ACX5096 ports, (0 through 95) support:
• 1 Gbps SFP transceivers
• 10 Gbps SFP+ transceivers
21Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions
-
• 10 Gbps direct attach copper (DAC) cables
Ports 96 through 104 support:
• 40 Gbps QSFP+ transceivers
Additionally ports 96 and 100 support:
• QSFP+ direct attach copper (DAC) cables
• QSFP+ to SFP+ direct attach copper break out (DACBO) cables
• QSFP+ to SFP+ fiber break out cables
See “Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for an ACX5000
Router” on page 62 and “Interface Specifications for SFP+ DAC Cables for an ACX5000
Router” on page 77. All 96 of these ports can be used for SFP+ transceivers or SFP+
direct attach copper (DAC) cables. You can use 1-Gigabit Ethernet SFP+,
10-Gigabit Ethernet SFP+ transceivers and SFP+ direct attach copper cables in any
access port.
CAUTION: Donot place a copper transceiver in an access port directly aboveor below another copper transceiver. Internal damage to the access portsand router canoccur.We recommendeitherusing the topport rowexclusively,or bottom port row exclusively, for copper transceivers.
Channelizing Interfaces
The port panel of an ACX5096 supports up to amaximum of 104 logical 10 GbE ports
that can be distributed over 96 small form-factor pluggable plus (SFP+) and 8 quad
small-formfactorpluggableplus (QSFP+) transceivers .Becauseofan 104port restriction,
only two of the eight QSFP+ can be channelized. Depending on how you set the system
mode for channelization, the behavior of channelization for the QSFP+ changes. The
following systemmodes are available for the ACX5096 router:
• Non-oversubscribed
All 96 SFP+ ports on the router (PIC 0) are supported. In this mode, the eight QSFP+
ports are not supported and cannot be channelized. There is nopacket loss for packets
of any size in this mode.
• Default mode
All 96 SFP+ ports on the router (PIC 0) are supported. QSFP+ ports 96 and 100 can
be channelized. If ports 96 and 100 are channelized, the interfaces on ports 97, 98, 99,
101, 102, and 103 are disabled.
RelatedDocumentation
Access Port and Uplink Port LEDs on an ACX5000 Router on page 26•
Copyright © 2015, Juniper Networks, Inc.22
ACX5048 and ACX5096 Universal Access Router
-
Chassis Status LEDs on an ACX5000 Router
The ACX5000 routers has four status LEDs on the FRU side of the chassis, next to the
management ports (see Figure 11 on page 23).
Figure 11: Chassis Status LEDs on an ACX5000 Routers
4—1— RJ-45 console port (C0N) )Status LEDs
5—2— USB portem1–SFPmanagement Ethernet port (C1)Cage(socket foreither 10/100/1000Base-TRJ45 SFP or 1GbE fiber SFP)
3—em0–RJ-45 (10/100/1000 Base-T)management Ethernet port (C0)
Table 8 on page 24 describes the chassis status LEDs on anACX5000 router, their colors
and states, and the status they indicate. You can view the colors of the three LEDs
remotely through the CLI by issuing the operational mode command show chassis lcd.
23Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions
-
Table 8: Chassis Status LEDs on an ACX5000 Router
DescriptionStateColorName
The router is halted or there is no alarm.OffUnlitALM–Alarm or beacon
Amajor hardware fault hasoccurred, suchas a temperature alarm or power failure,and the router has halted. Power off theACX5000 router by setting the AC powersource outlet to the OFF (O) position, orunplugging the AC power cords. Correctany voltage or site temperature issues,and allow the router to cool down. Poweron the ACX5000 router andmonitor thepower supply and fan LEDs to helpdetermine where the error is occurring.
On steadilyRed
Aminor alarm has occurred, such as asoftware error. Power off the ACX5000router by setting the AC power sourceoutlet to the OFF (O) position, orunplugging theACpower cords. Power onthe ACX5000 router andmonitor thestatusLEDs toensure that JunosOSbootsproperly.
On steadilyAmber
The router is powered off or halted.OffUnlitSYS–System
Junos OS for ACX Series is loaded on therouter.
On steadilyGreen
The router is a linecard member.OffUnlitMST–Master
The router is a standalone router.On steadilyGreen
The beacon feature is not enabled on therouter. This feature is enabled using therequest chassis beacon command.
OffUnlitID–Identification
The beacon feature is enabled on therouter. This feature is enabled using therequest chassis beacon command.
BlinkingBlue
RelatedDocumentation
Management Panel of an ACX5000 Router on page 17•
• show chassis alarms
• request chassis beacon
Management Port LEDs on an ACX5000 Router
Themanagement ports (labeled C0 for 10/100/1000 Base-T and C1 for 10/100/1000
Base-T and SFP 1000 Base-X connections) on an ACX5000 router have two LEDs that
Copyright © 2015, Juniper Networks, Inc.24
ACX5048 and ACX5096 Universal Access Router
-
indicate link status and link activity (see Figure 12 on page 25). The left LED indicates
status; the right LED indicates link/activity.
Figure 12: Management Port LEDs on an ACX5000 Router
4—1— RJ-45 console port (C0N) )Status LEDs
5—2— USB portem1–SFPmanagement Ethernet port (C1)Cage(socket foreither 10/100/1000Base-TRJ45 SFP or 1GbE fiber SFP)
3—em0–RJ-45 (10/100/1000 Base-T)management Ethernet port (C0)
Table 9 on page 25 describes the management port LEDs.
Table 9: Management Port LEDs on an ACX5000 Router
DescriptionStateColorLED
No link is established, there is a fault, or the link is down.OffUnlitLink/Activity
A link is established, but there is no link activity.On steadilyGreen
A link is established, and there is link activity.Blinking or flickering
25Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions
-
Table 9: Management Port LEDs on an ACX5000 Router (continued)
DescriptionStateColorLED
Either the port speed is 10 M or the link is down.OffUnlitStatus
The port speed is 1000M.On steadilyGreen
The port speed is 100 M.On steadilyAmber
RelatedDocumentation
Management Panel of an ACX5000 Router on page 17•
• ConnectinganACX5000Router toaNetwork forOut-of-BandManagementonpage122
Access Port and Uplink Port LEDs on an ACX5000 Router
TheLink/Activity andStatusLEDconfiguration forACX5000 routersusebi-coloredLEDs.
The linkLED indicates linkactivity or a fault. ThestatusLED indicates transceiverpresence.
See Table 10 on page 27 to locate the position and type of LED for your ACX5000model.
Copyright © 2015, Juniper Networks, Inc.26
ACX5048 and ACX5096 Universal Access Router
-
Table 10: ACX5000 Access Port and Uplink LED Locations
LocationIndicatorsPort TypeModel
g050
235
Link/ActivityLED
StatusLED
LinkStatus
SFP+ACX5048
LinkStatus
SFP+ACX5096
Table 11 on page 27 describes how to interpret the SFP+ port LEDs.
Table 11: Network Port LEDs on SFP+ Ports on an ACX5000 Router
DescriptionStateColorLED
The port is administratively disabled, there is no power, the linkis down, or there is a fault.
OffUnlitLink/Activity
A link is established, but there is no link activity.On steadilyGreen
A link is established, and there is link activity.Blinking
The beacon is enabled on the port.BlinkingAmber
27Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions
-
Table 11: