Actuators used in Pushing Actuators used in Machining - Drilling.

22

TAGS:

Transcript of Actuators used in Pushing Actuators used in Machining - Drilling.

Page 1: Actuators used in Pushing Actuators used in Machining - Drilling.
Page 2: Actuators used in Pushing Actuators used in Machining - Drilling.

Actuators used in Pushing

Page 3: Actuators used in Pushing Actuators used in Machining - Drilling.

Actuators used in Machining - Drilling

Page 4: Actuators used in Pushing Actuators used in Machining - Drilling.

Actuators used in Testing and Quality Control

Page 5: Actuators used in Pushing Actuators used in Machining - Drilling.

Piston Compressor

Page 6: Actuators used in Pushing Actuators used in Machining - Drilling.

Screw Compressor

Page 7: Actuators used in Pushing Actuators used in Machining - Drilling.

Axial Compressor

Page 8: Actuators used in Pushing Actuators used in Machining - Drilling.

Filter

Condensate

Filter bowl

Drain screw

Baffle

Lubricator

Filter unit

Pressure regulator

Air Filter

Page 9: Actuators used in Pushing Actuators used in Machining - Drilling.

Air Service Unit (Unit Pelayanan Udara)

Page 10: Actuators used in Pushing Actuators used in Machining - Drilling.

Air Service Unit

Page 11: Actuators used in Pushing Actuators used in Machining - Drilling.

Single Acting Cylinder

Page 12: Actuators used in Pushing Actuators used in Machining - Drilling.

Double Acting Cylinder

Page 13: Actuators used in Pushing Actuators used in Machining - Drilling.

Katup pneumatik 2/2

Page 14: Actuators used in Pushing Actuators used in Machining - Drilling.

MACAM-MACAM KATUP PNEUMATIKKatup pneumatik 3/2

Page 15: Actuators used in Pushing Actuators used in Machining - Drilling.

MACAM-MACAM KATUP PNEUMATIKKatup pneumatik 4/2

Page 16: Actuators used in Pushing Actuators used in Machining - Drilling.

Katup pneumatik 5/2

Page 17: Actuators used in Pushing Actuators used in Machining - Drilling.

Throtle Valve

Page 18: Actuators used in Pushing Actuators used in Machining - Drilling.

MACAM-MACAM KATUP PNEUMATIKShuttle Valve (OR Valve)

Page 19: Actuators used in Pushing Actuators used in Machining - Drilling.

Two Pressure Valve (AND Valve)

Page 20: Actuators used in Pushing Actuators used in Machining - Drilling.

Time Delay Valve

Page 21: Actuators used in Pushing Actuators used in Machining - Drilling.

Gb a. Langsung

Gambar Rangkaian Pengontrolan Pneumatik

Gb b.Tak Langsung

Page 22: Actuators used in Pushing Actuators used in Machining - Drilling.

Langsung

Gambar Rangkaian Pengontrolan Pneumatik

Tak Langsung


Pushing Daisies

Pushing Daisies

POWER TRANSMISSION Overview of the systems used to transfer power from actuators to the outputs.

POWER TRANSMISSION Overview of the systems used to transfer power from actuators to the outputs.

Introduction to Robotics - philadelphia.edu.jo · Actuators Actuators are the components used by the robot to apply force or move itself. The most commonly-used actuators are: 1.

Introduction to Robotics - philadelphia.edu.jo · Actuators Actuators are the components used by the robot to apply force or move itself. The most commonly-used actuators are: 1.

Actuator, Actuators, Linear Actuators, Electric Linear Actuators

Actuator, Actuators, Linear Actuators, Electric Linear Actuators

Presentazione di PowerPoint · Most Popular Actuators First robots used hydraulic and pneumatic actuators • Hydraulic actuators are expensive, weighing, and hard to maintain (big

Presentazione di PowerPoint · Most Popular Actuators First robots used hydraulic and pneumatic actuators • Hydraulic actuators are expensive, weighing, and hard to maintain (big

LINEAr ACTUATOrS AND GEAr BOXES SELECTION CrITErIAseditec.fr/img/cms/pdfs/Guide-electric-jack.pdf · Linear actuators are independent systems used to obtain linear movements: basically,

LINEAr ACTUATOrS AND GEAr BOXES SELECTION CrITErIAseditec.fr/img/cms/pdfs/Guide-electric-jack.pdf · Linear actuators are independent systems used to obtain linear movements: basically,

Actuators Module 3 - Sizing of Actuators

Actuators Module 3 - Sizing of Actuators

These Actuators operate the V5011 and V5013 Valves The MO953 and MP953 Pneumatic Valve Actuators (“Actuators”) are used with V5011 and V5013 Valves and can control older steam

These Actuators operate the V5011 and V5013 Valves The MO953 and MP953 Pneumatic Valve Actuators (“Actuators”) are used with V5011 and V5013 Valves and can control older steam

SERIES Multi-Voltage Electric Actuators 5610 5615...Multi-voltage electric actuators are typically used to automate quarter turn ball valves, butterfly valves and dampers. The 5610/5615

SERIES Multi-Voltage Electric Actuators 5610 5615...Multi-voltage electric actuators are typically used to automate quarter turn ball valves, butterfly valves and dampers. The 5610/5615

Pushing poverty

Pushing poverty

HYDRAULIC TEST ACTUATOR - Moog Inc. · 2020-06-25 · Actuators to Automatic Gap Control Actuators used in steel mill production line. Today, Moog engineers have further developed

HYDRAULIC TEST ACTUATOR - Moog Inc. · 2020-06-25 · Actuators to Automatic Gap Control Actuators used in steel mill production line. Today, Moog engineers have further developed

HercuLine Electric Actuators - Honeywell · HercuLine® Actuators 10260 2000 Series High reliability, accurate positioning and low maintenance Used for very precise and repeatable

HercuLine Electric Actuators - Honeywell · HercuLine® Actuators 10260 2000 Series High reliability, accurate positioning and low maintenance Used for very precise and repeatable

SCREW JACK - duffnorton.com Jacks/106-PowerActuators.pdfSCREW JACK POWERED ACTUATORS Determine whether machine screw or ball screw actuators are to be used. Determine if it is a single

SCREW JACK - duffnorton.com Jacks/106-PowerActuators.pdfSCREW JACK POWERED ACTUATORS Determine whether machine screw or ball screw actuators are to be used. Determine if it is a single

Combined Full Collision Attack: Pushing the Limits of ... · 2 Combined Full Collision Attack: Pushing the Limits of Exhaustible Key Spaces of the key, and hence can only be used

Combined Full Collision Attack: Pushing the Limits of ... · 2 Combined Full Collision Attack: Pushing the Limits of Exhaustible Key Spaces of the key, and hence can only be used

Precision Linear Actuators ECT Series Manual - Thomson · of the individual components that are used to build the different ECT Precision Linear Actuators. The page numbering in the

Precision Linear Actuators ECT Series Manual - Thomson · of the individual components that are used to build the different ECT Precision Linear Actuators. The page numbering in the

Weatherproof Multi-turn Actuators - BERNARD CONTROLS · 2017. 5. 22. · Weatherproof Electric Actuator 3. Overview Quarter-turn actuators are used to operate ball, plug or butterfly

Weatherproof Multi-turn Actuators - BERNARD CONTROLS · 2017. 5. 22. · Weatherproof Electric Actuator 3. Overview Quarter-turn actuators are used to operate ball, plug or butterfly

Electrical Linear Actuators for Positioning Force Continuous … · 2018-05-09 · 3 2. General 2.1 Proper use Linear actuators for continuous positioning are intended to be used

Electrical Linear Actuators for Positioning Force Continuous … · 2018-05-09 · 3 2. General 2.1 Proper use Linear actuators for continuous positioning are intended to be used

Series MA-Actuator - von Rohr Armaturen AG · Powerful valve actuator Our multi-spring actuators are used to convert a pressure into a linear mo-tion. They are used as actuators for

Series MA-Actuator - von Rohr Armaturen AG · Powerful valve actuator Our multi-spring actuators are used to convert a pressure into a linear mo-tion. They are used as actuators for

Review of Key Concepts 1 Arrow Pushing - ETH Z · 1 Arrow Pushing Arrow pushing is a technique used to describe the progression of a mechanism. Arrows represent the movement of electrons

Review of Key Concepts 1 Arrow Pushing - ETH Z · 1 Arrow Pushing Arrow pushing is a technique used to describe the progression of a mechanism. Arrows represent the movement of electrons

1 Actuators are used in order to produce mechanical movement in robots.

1 Actuators are used in order to produce mechanical movement in robots.