Acoustic White Underlay - Roofing Products | Flooring Products · orative laminates, chipboard...
Transcript of Acoustic White Underlay - Roofing Products | Flooring Products · orative laminates, chipboard...
Acoustic White Underlay
Fibreboard
Comfort Gold & Silver Foam Underlay
Timbertech Rubber Underlay
Carpenter Underlays
Damtec Acoustic Underlays
Floor 2 Floor Range
Stair Trims
Accessories
Adhesives
Also From Laydex
PAGE 2
PAGE 3
PAGE 4 – 5
PAGE 6
PAGE 7 - 10
PAGE 11 - 12
PAGE 13 - 15
PAGE 16
PAGE 17 - 18
PAGE 19 - 22
PAGE 23
100% recyclable closed cell pol-ythene foam underlay; for lami-nate, engineered and solid wood; do-mestic installations. Thermal insulation Impact and airborne sound
insulation Shock insulation Takes out unevenness in the
subfloor Supports and protects Increases the serviceability life of
the floor covering Dust free Lightweight - easy to lift and
manoeuvre Quick and easy to cut and install Eco friendly
ACOUSTIC WHITE
Top value for money wood underlay!
REF SIZE THICKNESS
510771 25m x 1m 2mm
320701 100m x 1m 3mm
Page 2
Natural wood fibre insulating panels; for laminate, engineered and solid wood; domestic installations. Eliminates considerable unevenness
in the subfloor Traditional material Firm and stable support and
protection Increases the serviceable life of the
floor covering High weight resistance Exceptional thermal insulation Impact and airborne sound
insulation Shock insulation Lightweight - easy to lift and
manoeuvre Quick and easy to install Eco-friendly composition
FIBREBOARD
REF SIZE THICKNESS
690018 7.02m² per pack 5.5mm
Page 3
REF SIZE THICKNESS
510776 15m x 1m 5mm
COMFORT GOLD
Dense closed cell polythene foam underlay with a gold vapour barrier film on one side and overlap; for laminate, engineered and solid wood; domestic installations. Metallised gold vapour barrier film
protects against moisture migration from the subfloor
Overlap High density Extra thick cushioning High resistance to puncture Thermal insulation Impact and airborne sound insulation Shock insulation Takes out unevenness in the subfloor Long term support and protection
increases the serviceable life of the floor covering
Dust free Lightweight, easy to lift and manoeu-
vre Quick and easy to cut and install Eco-friendly
Page 4
REF SIZE THICKNESS
320677 15m x 1m 3mm
Our Comfort range are engineered to reduce the excess sound in wood and laminate floors. Described as a cost effective solution, this closed cell polythene foam underlay with a silver vapour barrier film on one side and overlap; for laminate, engineered and solid wood; domestic installations. Comfort Silver underlay give sound absorption and cushioning support. Our products do not generate any dust, are non-toxic, help to absorb minor floor imperfections and are CFC and HCFC free. Overlap High density Extra thick cushioning High resistance to puncture Thermal insulation Impact and airborne sound insulation Shock insulation Takes out unevenness in the subfloor Long term support and protection increase
the serviceable life of the floor covering Dust free Lightweight, easy to lift and manoeuvre Quick and easy to cut and install Eco-friendly
COMFORT SILVER
Page 5
TIMBERTECH
REF SIZE THICKNESS
690017 10m x 1m 2mm
690007 10m x 1m 3mm
One of the highest quality heavy duty, ultra high density, natural rubber underlay with a silver vapour barrier film and backing fleece; for laminate, engineered and solid wood; domestic and contract installations. Laminated with silver vapour barrier
film - protects against moisture migration from sub floor
Backing fleece on one side Ultra heavy mass stability and
enhanced stay-put quality Superior sound energy absorption
and performance properties
Page 6
Carpenter underlay's deliver lasting luxury and comfort and are guaranteed for the lifetime of the carpet. They are recycled from unused trim generated by furniture, bedding and au-tomotive industries and are 100 % recyclable. Carpenter under-lay's are permeable and can be laid over a wood block floor. High Density Excellent durability Exceptional resilience - retains
it bounce-back ability (far more than typical sponge rubber underlay)
Luxurious underfoot comfort High thermal insulation Excellent impact and
airborne sound insulation Shock insulation Long life performance Flame retardant Lightweight Quick and easy to install Eco-friendly
CARPENTER
Page 7
Classified to BS 5808 Luxury use Density 75Kg/m³ Decible Reduction Delta Lw:38dB Thermal insulation: 2.47 Tog Suitable for stretch fit installations
Classified to BS 5808 General Domestic Use
Density 75Kg/m³ Impact sound insulation: 34dB Thermal insulation: 2.13 Tog Suitable for stretch fit installations
REF SIZE THICKNESS
365945 11m x 1.37m (15.07m²)
8mm
REF SIZE THICKNESS
608043 11m x 1.37m (15.07m²)
10mm
CARPENTER
SUPER GREEN STEP
GREEN STEP
Page 8
Classified to BS 5808 Heavy Contract Use Suitable for stretch fit installations Density 145Kg/m³ Impact sound insulation: 36dB Thermal Insulations: 2.3 Tog
REF SIZE THICKNESS
339835 11m x 1.37m (15.07m²)
11mm
CARPENTER
REF SIZE THICKNESS
339836 11m x 1.37m (15.07m²)
7mm
FIRM STEP
Classified to BS 5808 Luxury Use Suitable for stretch fit installations Density: 100 Kg/m³ Thermal Insulation: 3.1 Tog Impact Sound Insulation: 44 dB
DEEP STEP
Page 9
CARPENTER
REF SIZE THICKNESS
632480 11m x 1.37m (15.07m²)
6mm
REF SIZE THICKNESS
632427 11m x 1.37m (15.07m²)
9mm
EXTRA STEP
Classified to BS 5808 Heavy Contract Use Suitable for stretch fit and double stick
installations Density 180Kg/m³ Impact sound insulation: 33dB Thermal Insulations: 1.77 Tog High flame retardancy
Classified to BS 5808 Luxury Use Suitable for stretch fit and double stick
installations Density 180Kg/m³ Impact sound insulation: 40dB Thermal Insulations: 2.51 Tog
ULTRA STEP
Page 10
REF SIZE THICKNESS
690080 20m x 1m 3mm
This underlay can be used under parquet, laminate, carpeting and ceramic tiles it also reduces unwanted noise within your own four walls and those of your neighbours as well. DAMTEC® standard may be laid loose or glued, according to the application and requirements. DAMTEC® standard ensures a pleasant work or residential environment and is well suited for use in a wide range of applications. Material: Fine granules of recycled rubber and cork with PU elastomer bonding agent.
Volumetric weight: approx. 700 kg/m³
Temperature resistance: -30° bis 80°C
Fire resistance
Impact sound improvement: (ISO 140‐8/ISO 717‐2)
29 dB under textile flooring
20 dB under 8 mm laminate flooring
19 dB under 13 mm parquetry
18 dB under 16 mm solid wood
51dB under tiles
DAMTEC STANDARD
Page 11
DAMTEC® colour G is grinded on one side and with its special selection of raw materials excellent below linoleum and PVC flooring. Its plasticizer-free formulation, which prevents softener migration and floor finish discoloration, as well as its grinded surface eliminate the need for a separating layer between the underlay and the floor covering. With its mixture from natural raw materials – rubber and cork – DAMTEC® colour G is an excellent insulating underlay for floors in residential and other buildings. DAMTEC® colour without grinded surface is also suitable under parquetry and laminate floors as well as under textile floors. Material: High-quality granules of recycled rubber and cork with PU elastomer bonding agent
Colour: multi-coloured
Surface: granular texture
Volumetric weight: approx. 650 kg/m³
Temperature resistance: -30° bis 80°C
Fire resistance
Impact sound improvement: (ISO 140‐8/ISO 717‐2)
24 dB under textile flooring
19 dB under PVC-flooring
16 dB under linoleum
18dB under solid wood REF SIZE THICKNESS
690081 30m x 1m 2mm
DAMTEC COLOUR
Page 12
A range of premium quality Plaza
Profiles with variants for every
floor covering and every
application.
Standard Profiles
Standard Heavy Duty & Raised
Base Profiles
Self Adhesive Profiles
Specialist Trims for Carpet &
Linoleum
Specialist Trims for Laminate
Standard DIY Profiles
Woodfix Self Adhesive Profiles
Multifix Profiles
Multifix Base Systems
Slim Line Stair Nosings
Heavy Duty Stair Nosings
Stair Nosings – Edging Trims
Can’t see your profile here, call our office for more profiles!
Page 13
PROFILES & NOSINGS
Single Edge Trim
Conceals and protects the carpet edge. Available in silver & gold.
Screw down.
Dual Edge Trim
Conceals and protects the joints between two carpets. Available in
Silver & gold. Screw down.
Cover Strip Provides covering and protection for
a wide variety of floor coverings. Available in silver & gold. Screw &
stick down.
Ramp Edge
Provides a smooth transition down to resilient floor coverings. Available in
silver & gold. Stick down.
Z Bar Gives a smooth transition between
laminate and carpet. Available in silver & gold. Screw down.
Vinyl Edge Conceals and protects the edge of vinyl floor covering. Available in
silver & gold. Screw down.
Flexi Edge It can be used as an edge trim on the
vertical with wall tiles or on the hor-izontal with Floor tiles or even as a fea-ture strip in wall or floor applications.
Angle Edge Conceals and protects the edge of
wooden floor covering. Available in silver & gold. Stick down.
Page 14
Solid Wood Reducer
Scotia
Solid Wood Square Edge
Solid Wood Flooring Available in White Oak 90mm & 120mm Red Oak 90mm & 120mm . Grades A, B & C.
Solid Wood T Section
Solid Wood Floor to Tile/Carpet
Solid Wood Skirting
Page 15
STAIR TRIMS
For Our Full Range of Nosing’s & Trims
Contact our Office!
Bull Nose
Kinked Face
Double Insert
Rake Back
Straight Edge
Page 16
ACCESSORIES
Grinding Blocks
Adhesive Trowel
Building Paper
Spiked Roller
Hand Scraper
Chalk Line
Gripper Rods
DPM 250mu & 300mu
Page 17
ACCESSORIES
Large Measuring Tape
Napping Shears
Kicker
Carpet Cutter
Large Shears
Dolphin Knife
3 Piece Set
Heat Seaming Tape
Page 18
ADHESIVES
SPRAY ADHESIVE A high strength spray adhesive for bonding carpet tiles and non structural applications. Gives exceptionally strong adhesion for a wide range of demanding uses. Fitted with a variable discharge spray that controls the width of the fan. DCM free.
CONTACT ADHESIVE A premium grade, solvent-based, neoprene adhesive with high grab and long open time to enable re-positioning. This product is tol-uene-free! Can be used for bonding to cork, leather, rubber, met-als, wood, chipboard, hardboard, laminated plastics, dense tex-tiles, plaster, stone, concrete, cementitious screeds and smoothing compounds. It will bond rigid PVC and sheets but the materials should be checked for suitability prior to application as plasticiser migration can occur in some instances. Note: This product is not suitable for polystyrene, polythene, polypropylene, silicone rubbers, bitumen or PTFE. The solvent in the contact adhesive may attack certain painted or lacquered surfaces. Test a small area of adhesive on the surfaces prior to full application.
CONTACT SPRAY ADHESIVE ~ STAY-FIXT A multi purpose contact adhesive supplied in either a 500ml aerosol or a 17kg pressurised container which is linked through a 3.5 or 5 metre hose to a spray gun, this provides an easy to use, portable, time saving adhesive spray system. Can be used in a wide range of applications. Suitable for use with carpet, carpet tiles, linoleum, vinyl, laminates, fabrics, foams, felt, cardboard, paper, rubber, polythene and most plastics.
CONTACT SPRAY ADHESIVE Contact Adhesive in an Aerosol. Not to be confused with Standard Carpet or Multi Purpose Adhesive. The first product from the new gener -ation of synthetic rubber/resin adhesives. Its high solids/ low solvent formula produces a quicker, stronger, more aggressive bonding system which out performs all conventional aerosol adhesives Ideal for bonding laminates, carpets, carpet tiles, most vinyl floor coverings, fabrics, foams and felts, pvc skirtings and much more.
Page 19
ADHESIVES
DUO WOOD GLUE Designed as a one-pack ready-to-use adhesive which gives a fast rate of bond strength development. Suitable for hard and soft woods, dec-orative laminates, chipboard blockwood and other engineered timber panels. Can be used in applications where joints may be subjected to short term water contact or exposure to high humidity.
LX16 WOOD ADHESIVE A solvent based, heavy duty, interior adhesive for bonding all types of wood flooring. Ideal for use where the nature of the wood flooring makes it particularly prone to warping when bonded with a waterborne adhesive. Easy to spread with a high shear strength and short open time. Suitable for use on parquet flooring, woodblock and wood strip to most common substrates. Can be used with underfloor heating systems
PU5 ADHESIVE One-part moisture cure polyurethane adhesives specially formulated for waterproofing bonding. These products are seawater proof and are resistant to acid and chemicals. A solvent-free, rapid setting thix-otropic translucent PU gel which sets in 5 minutes. Excellent bond-ing properties suitable for all wood products including garden furni-ture, staircases, boats, sandwich panels and insulation materials to most common substrates. Suitable for interior and exterior ap-plications.
GRIPBOND GREEN GRAB A multi-purpose, synthetic rubber based construction adhesive that can replace mechanical fixings in a wide variety of domestic, commercial and industrial applications. A fast bonding, non-slumping, instant grab adhesive with good gap-filling properties even on uneven surfaces. It can be used in all weather conditions and is suitable for rough and porous surfaces. It can also be over-painted once dry. Bridges gaps up to 10mm. Ideal for fixing a wide variety of materials. It can be used to fix skirting boards, door sur-rounds and frames, window sills, all types of cladding, wall bat-tens, decorative wall boards, metal carpet edges, automotive trims and much more. It can be used for interior and exterior applica-tions. NOTE: this product is Toluene free!
Page 20
CARPET TILE TACKIFIER (CTT) CTT is a solvent-free, acrylic emulsion formulated to provide a permanently tacky film for the removable fixing of loose lay carpet tiles. This enables the tiles to be easily lifted and replaced when required. The adhesive in non-staining, resistant to plasticiser migration and may be applied by either roller or brush.
FLOORBOND GPA A solvent-free, high tack carpet adhesive with anti-macrobacterial protection. Fast grab - strong final bond strength, suitable over most underfloor heating systems. Will bond the majority of carpets including, backings of foam, actionbac, felt back, jute back, latex unitary back, needle-punch but NOT for use with PVC back carpet. It may also be used to bond both rigid and semi-flexible vinyl tiles but NOT fully flexible vinyl's.
MPA Multi-Purpose Acrylic. A light coloured, solvent-free, acrylic emulsion adhesive. The adhesive has a long open time with early tack development, is non staining and has excellent resistance to plasticiser migration. Bond It MPA is a recommend for installing vinyl sheet and tile coverings, cushion floor, PVC and PU foam backed carpets, the majority of other carpets and needle punch / fibre bonded carpets. Please check with Technical Service for compatible products. Suitable for use over most underfloor heating systems.
PSA Pressure Sensitive Adhesive. A premium grade pressure sensitive, solvent free, acrylic adhesive for use with resilient floor coverings. It is non staining, has excellent resistance to plasticiser migration and may be applied by either trowel or roller. Bond It PSA is recommended for installing PVC, vinyl sheet and tiles and other vinyl backed floor coverings, cushion floor, PVC backed carpet, Polyurethane foam gel carpet, including impervious backing.
ADHESIVES
Page 21
SOLVENT CLEANER Special blend of solvents formulated to quickly remove spillages of oil, grease, and adhesive from most surfaces, including carpets, fabrics and trims. Ideal for removing adhesive overspray from skirting boards, walls, doors etc.
EMI CLASSIC A truly multi-purpose, pressure sensitive, acrylic dispersion floorcovering adhesive. Suitable for probably 97% of all floorcoverings onto porous or non-porous sub-floors. Emiclassic will bond PVC, Designer PVC, Linoleum sheet, rubber up to 4mm thickness, cushioned vinyl, carpets and has recommendation by major floorcovering manufacturers. It is completely solvent-free and has low odour making it ideal for sensitive installations. It has a good bond strength, rapid curing properties, and requires only a short open time. Carries EC1 rating for very low emissions. It is suitable for bonding textile wall and floor coverings, woven fabrics, needlepunch, PVC, vinyl, lino, cork and synthetic rubber coverings. This product in certain circumstances can be laid over old floorcoverings - consult our technical department for further information. It is suitable for use with underfloor heating systems and has been tested for use with castor wheel loading.
UNITEC Solvent-free dispersion adhesive suitable for bonding of textile coverings with e.g. synthetic backing, needlefelt, natural fibre coverings with backing as well as linoleum, PVC and CV floor coverings on suitable absorbent substrates in interior areas.
ADHESIVES
TS 550 A permanently flexible, one part, ready-to-use, moisture cure, internal wood flooring adhesive. Free from silicone, solvent, isocyanates and water. Based on hybrid polymer technology it reduces the risk of warping or deforming the wood flooring due to its moisture and solvent free composition. It features: Quick cure and rapid bond strength, permanently elastic, suitable for use with underfloor heating. For the internal bonding of parquet, mosaic, oak, wood block, laminated, exotic timber and many other wood floor types to porous or non porous substrates including screeds, chipboard, plywood, concrete and anhydrite.
Page 22
Laydex Ltd 4/5 Falcon Way
Belfast BT12 6SQ
Telephone: 02890 382223
Fax: 028 90038 2230 Email: [email protected]