ACO DRAIN®

ACO DRAIN® Monoblock Racing

For the highest levels of safety and drainage

The ACO Group –

We protect, design and drain.

ACO sports elements in China.

ACO stands worldwide for top class pro-ducts and system solutions for drainage technology and construction components for civil engineering, construction and building services.

We also stand for special solutions for sports arenas, farming and landscaping, special stainless steel construction, pro-cess engineering and foundry technology. The top quality of ACO products reflects the Group’s worldwide expertise, invest-ment in R & D and experience in materi-als technology of:

– Polymer concrete– Stainless steel– Cast iron– Plastic– Reinforced concrete

ACO DRAIN® surface drainage in Chicago next to

the Chicago Bean.

ACO Group at a glance:

Over 3700 staff

in 40 countries (Europe,

America, Asia, Australia)

31 production sites

in 12 countries

Sales 2007:

Euro 603 million €

ACO DRAIN® surface drainage at Potsdamer Platz.

ACO DRAIN® Monoblock Racing

ACO polymer concrete – better by farThe superb properties of ACO polymer concrete reflect its special material com-position and state-of-the-art ACO produc-tion technology:

Bending tensile strength: > 22 N/mm2

Compressive strength: > 90 N/mm2

Module of elasticity: approx. 25 kN/mm2

Density: 2.1– 2.3 g/cm3

Water penetration depth: 0 mmChemical resistance: highSurface roughness: approx. 25 µm

ACO DRAIN® channel units have much higher strengths and lower weights for the same density as comparable con- crete products. The low weight of the components simplifies handling and ins-tallation, and reduces costs. ACO poly-mer concrete is impermeable. Water dries rapidly from the surface. Frost damage is totally excluded. The smooth surface of ACO polymer concrete allows water and dirt particles to run off quickly – making it easy to clean. Polymer con-crete is also resistant to aggressive media without any need for extra coating and can be used flexibly and perma- nently even under extreme conditions.

1000260200

530

65

47

75

Class A 15 1)

Class B 125 1)

Class C 250 1)

Class D 400 1)

Class E 600 1)

Class F 900 1)

Areas which can only be used by pedestrians and pedal cyclists.

Footways, pedestrian areas and comparable areas, private car parks or car parking decks.

Kerb sides and non-trafficked areas of hard shoulders and similar; Kerb units are always group 3.

Carriageways of roads (including pedestrians streets), hard shoulders and parking areas, for all types of road vehicles.

Areas subjected to high wheel loads, e. g. ports and dock sides.

Areas subjected to especially high wheel loads e. g. aircraft pavements.

* Traffic area classification for drainage channels, construction and testing regulations, conformity labelling and assessment.

1) Test force in kN

The unique monocast construction guar-antees extremely high levels of safety and stability in all transport surface drai-nage applications. The high intake area and the V-profile ensure rapid surface drainage. A simple modular principle quickly and easily solves a whole range of applications.ACO DRAIN® Monoblock is a winner thanks to the simple and inexpensive installation of system components.

Bracing elements during installation are not required. The integrated sealant groove ensures that there are watertight seals between each unit as required by EN 1433 specifications. The channel is simply self-cleaned by the high flow velocity. The 0.5 m sump unit with the removable grating provides access to the in-side of the channel.

Safety, stability and high functionality

thanks to monocast construction

DIN EN 1433 table of load classification*

1000260200

530

65

47

75

Dimensions channel unit RD 100 V, 1.0 m

Dimensions channel unit RD 200 V, 1.0 m

ACO DRAIN PD 100 0.0

1000150100

8

2545

30

200

ACO

C 250

ACO

C 250

ACO DRAIN PD 200

250

24

7760

1000250200

325

100

Dimensions channel unit PD 100, 1.0 m

Dimensions channel unit PD 200, 1.0 m

1) without rasing piece 134 cm, 2) without rasing piece 353 kg

ACO DRAIN® Monoblock channel RD 100 V/200 V/300

The ACO DRAIN® RD 100 V to 300 chan-nel system is particularly suitable for the cross and longitudinal drainage of motor racing tracks, highways and motorways. The large inflow slots ensure that the sur-face water enters the drain quickly and efficiently to clear water fast from large areas.

RD 100 V to channel systems are sui-table for all load classes from A 15 pe-destrian areas to F 900 airport surfaces.

Optional side inlets to

drain porous surfaces.

The Monoblock channels are also avai-lable with side inlets to drain porous sur-faces.

Technical data for channels RD 100 V/200 V/300

Monoblock RD 300,

RD 200 V and RD 100 V

Name Length Width Height Weight Inlet cross cm cm cm kg Section cm2/m Channel RD 100 V

Class D 400/F 900 100 16 26,5 50 308 Channel with

access opening. 50 16 27,5 21 380 Sump unit

Single-piece DN 100 50 16 52,5 31,5 380 Sump unit

Single-piece DN 150 50 16 52,5 31,3 380

Channel RD 200 V

Class D 400/F 900 0.0/20.0 100 26 33,0/53,0 88/110 583 Channel with

access opening 66 26 33,0/53,0 48/65 935 Sump unit

multi-part DN 150 50 23 36,5 26,5 935 Sump unit

multi-part DN 200 50 23 36,5 26,5 935

Channel RD 300

Class D 400/F 900 200 40 59,5 484 800 Channel with

access opening 75 40 64,5 219 1511 Sump unit

multi-part DN 300 75 40 1651) 4252) 1511 Sump unit

multi-part DN 400 75 40 1651) 4252) 1511

ACO DRAIN® Monoblock Racing

ACO DRAIN PD 100 0.0

1000150100

8

2545

30

200

ACO

C 250

ACO

C 250

ACO DRAIN PD 200

250

24

7760

1000250200

325

100

Dimensions channel unit PD 100, 1.0 m

Dimensions channel unit PD 200, 1.0 m

The ACO DRAIN® Monoblock PD 100/ 200 channel system is designed for sur-faces which are used by vehicles as well as pedestrians. The inflow slots have been specially developed for safe use in pedestrian precincts as well as car parks. The single-piece channels are easy and safe to install because there are no

loose parts such as grates or bolts. ACO DRAIN® PD 100/200 are also produ-ced as monocast blocks. The inflow slots measure 8 mm to 24 mm wide, and are therefore not only safe for motorcyclists on race tracks but also guarantee opti-mal drainage thanks to the high capacity inlet cross sections.

Foto: Picture-Alliance

Technical data for channels PD 100/200

Monoblock PD 200

and PD 100

ACO DRAIN® Monoblock channel PD 100/200

Name Length Width Height Weight Inlet cross cm cm cm kg/m Section cm2/m Channel

PD 100 A-C 100 15 20,0 28,5 202 Channel with access opening. 50 15 20,0 14,0 202 Sump unit

multi-part DN 100 50 15 44,0 22,0 202 Sump unit

multi-part DN 150 50 15 44,0 22,0 202

Rinne

PD 200 A-C 100 25 32,5 68,0 487 Channel with

access opening 50 26 33,0 46,5 935 Sump unit

Single-piece DN 150 50 26 65,0 68,0 935 Sump unit

Single-piece DN 200 50 26 65,0 68,0 935

ACO Severin AhlmannGmbH & Co. KG

P. O. BOX 320D–24755 RendsburgAm AhlmannkaiD–24782 BüdelsdorfTel. +49 4331 354–172Fax +49 4331 354–222

info@aco-international.comwww.aco.com 01

/200

8

Ände

rung

en v

orbe

halte

n