Acid Base Titrations
description
Transcript of Acid Base Titrations
![Page 1: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/1.jpg)
Acid Base Titrations
AP ChemistryChapter 15
![Page 2: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/2.jpg)
Titration• Titrations are used to determine the amount of
acid or base in a solution• Titrant: the solution with known concentration
delivered into the “unknown”• Analyte: the substance of “unknown”
concentration• Equivalence point: the point at which all of the
acid/base has been neutralized.• Endpoint: the point at which the indicator
changes color (ideally this is the same as the equivalence point)
• The pH is then plotted to track the titration!
![Page 3: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/3.jpg)
Strong acid/base titrationsNaOH + HCl NaCl + H2O
To compute the pH (or the [H+]) at any given point:1. Determine the amount [H+] remaining….
2. Divide by the total volume of the solutionSince burets are graduated in mL, we can use a millimole (or mmole)…
Molarity = moles solute Liters solution
mm
![Page 4: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/4.jpg)
Let’s look at a titration where an acid is being neutralized with a base in increments…
50.0 mL of 0.200 M HNO3 with 0.10 M NaOH. Calculate pH at selected points where given quantities of NaOH are added.A. No NaOH added yet HNO3 H+ + NO3
-100%
0.200M[H+] = 0.200 M pH = -log (0.200) = 0.699
B. 10.0 mL 0.100 M NaOH added10.0 mL 0.100 mmole NaOH = 1.00 mmole NaOH 1 mL1.00 mmole NaOH reacts completely with….50.0 mL 0.200 mmole HNO3 = 10.00 mmole HNO3
1 mL…only 1.00 mmole HNO3 reacts, leaving 9.0 mmole HNO3.
[H+] = 9.0 mmole HNO3 = 0.15M 50.0 + 10.0 mL pH = -log (0.15) = 0.824
![Page 5: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/5.jpg)
Calculate pH when 50.0 mL of 0.200 M HNO3 titrated with ? mL 0.10 M NaOH. C. 20.0 mL (total) 0.100 M NaOH added20.0 mL 0.100 mmole NaOH = 2.00 mmole NaOH 1 mL2.00 mmole NaOH reacts completely with….50.0 mL 0.200 mmole HNO3 = 10.00 mmole HNO3
1 mL…only 2.00 mmole HNO3 reacts, leaving 8.0 mmole HNO3.
[H+] = 8.0 mmole HNO3 = 0.114M 50.0 + 20.0 mL pH = -log (0.114) = 0.942
![Page 6: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/6.jpg)
Calculate pH when 50.0 mL of 0.200 M HNO3 titrated with ? mL 0.10 M NaOH. D. 50.0 mL (total) 0.100 M NaOH added50.0 mL 0.100 mmole NaOH = 5.00 mmole NaOH 1 mL5.00 mmole NaOH reacts completely with….50.0 mL 0.200 mmole HNO3 = 10.00 mmole HNO3
1 mL…only 5.00 mmole HNO3 reacts, leaving 5.0 mmole HNO3.
[H+] = 5.0 mmole HNO3 = 0.05M 50.0 + 50.0 mL pH = -log (0.05) = 1.301
![Page 7: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/7.jpg)
Calculate pH when 50.0 mL of 0.200 M HNO3 titrated with ? mL 0.10 M NaOH. E. 100.0 mL (total) 0.100 M NaOH added100.0 mL 0.100 mmole NaOH = 10.00 mmole NaOH 1 mL10.00 mmole NaOH reacts completely with….50.0 mL 0.200 mmole HNO3 = 10.00 mmole HNO3
1 mL…all 10.00 mmole HNO3 reacts, leaving 0 mmole HNO3.
[H+] = 0 mmole HNO3 = 0 M 50.0 + 100.0 mL
pH = 7
The only source of [H+]is from the water thus…
![Page 8: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/8.jpg)
Calculate pH when 50.0 mL of 0.200 M HNO3 titrated with ? mL 0.10 M NaOH. F. 150.0 mL (total) 0.100 M NaOH added150.0 mL 0.100 mmole NaOH = 15.00 mmole NaOH 1 mL15.00 mmole NaOH reacts completely with….50.0 mL 0.200 mmole HNO3 = 10.00 mmole HNO3
1 mL…all 10.00 mmole HNO3 reacts, leaving 5.0 mmole OH- from the NaOH.
[OH-] = 5.0 mmole OH- = 0.025M 50.0 + 150.0 mL pOH = -log (0.025) = 1.602
pH = 12.40
![Page 9: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/9.jpg)
Calculate pH when 50.0 mL of 0.200 M HNO3 titrated with ? mL 0.10 M NaOH. G. 200.0 mL (total) 0.100 M NaOH added200.0 mL 0.100 mmole NaOH = 20.00 mmole NaOH 1 mL20.00 mmole NaOH reacts completely with….50.0 mL 0.200 mmole HNO3 = 10.00 mmole HNO3
1 mL…all 10.00 mmole HNO3 reacts, leaving 10.0 mmole OH- from the NaOH.
[OH-] = 10.0 mmole OH- = 0.04M 50.0 + 200.0 mL pOH = -log (0.04) = 1.4
pH = 12.6
![Page 10: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/10.jpg)
Gathering all of the information, the pH curve looks like this:
The pH changes slowly at
first…
The closer to the
equivalence point…
…the more dramatic the pH change
x
![Page 11: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/11.jpg)
Weak titrated with strong
• In an acid/base titration in which one substance is strong and the other weak…
• The solution is not neutral at the equivalence point due to the hydrolysis of the salt.
• So we have to work with a series of buffer problems.
• Working first the stoichiometry problem, then the equilibrium problem.
![Page 12: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/12.jpg)
Calculate pH when 50.0 mL of 0.100 M HC2H3O2 is titrated with ? mL 0.10 M NaOH. A. No NaOH added yet
.10 – x x x1.8x10-5 = x2 .10-x
x=[H+]=1.34x10-3 M pH = 2.87
HC2H3O2 H+ + C2H3O2-
![Page 13: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/13.jpg)
B. 10.0 mL 0.100 M NaOH added10.0 mL 0.100 mmole NaOH = 1.00 mmole NaOH 1 mL1.00 mmole NaOH reacts completely with….
50.0 mL 0.100 mmole HC2H3O2 =5.00 mmole HC2H3O2
1 mL…only 1.00 mmole HC2H3O2 reacts, leaving 4.0 mmole HC2H3O2 in 60 mL and 1.00 mmole C2H3O2
- in 60 mL
x = [H+] = 7.2x10-5 M
pH = 4.14
.0667 – x x .01667+x1.8x10-5 = x(.0167+x) .0667-x
HC2H3O2 H+ + C2H3O2-
Calculate pH when 50.0 mL of 0.100 M HC2H3O2 is titrated with ? mL 0.10 M NaOH.
![Page 14: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/14.jpg)
C. 25.0 mL 0.100 M NaOH added25.0 mL 0.100 mmole NaOH = 2.5 mmole NaOH 1 mL2.50 mmole NaOH reacts completely with….
50.0 mL 0.100 mmole HC2H3O2 =5.00 mmole HC2H3O2
1 mL…only 2.50 mmole HC2H3O2 reacts, leaving 2.5 mmole HC2H3O2 in 75 mL and 2.5 mmole C2H3O2
- in 75 mL
x = [H+] = 1.8x10-5 MpH = 4.74
.0333 – x x .0333+x1.8x10-5 = x(.0333+x) .0333-x
HC2H3O2 H+ + C2H3O2-
Calculate pH when 50.0 mL of 0.100 M HC2H3O2 is titrated with ? mL 0.10 M NaOH.
The the midway point since ½ of original acid is left.
![Page 15: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/15.jpg)
D. 40.0 mL 0.100 M NaOH added40.0 mL 0.100 mmole NaOH = 4.0 mmole NaOH 1 mL4.0 mmole NaOH reacts completely with….
50.0 mL 0.100 mmole HC2H3O2 =5.00 mmole HC2H3O2
1 mL…only 4.0 mmole HC2H3O2 reacts, leaving 1.0 mmole HC2H3O2 in 90 mL and 4.0 mmole C2H3O2
- in 90 mL
x = [H+] = 4.5x10-6 MpH = 5.35
.0111 – x x .044+x1.8x10-5 = x(.044+x) .0111-x
HC2H3O2 H+ + C2H3O2-
Calculate pH when 50.0 mL of 0.100 M HC2H3O2 is titrated with ? mL 0.10 M NaOH.
![Page 16: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/16.jpg)
E. 50.0 mL 0.100 M NaOH added50.0 mL 0.100 mmole NaOH = 5.0 mmole NaOH 1 mL5.0 mmole NaOH reacts completely with….
50.0 mL 0.100 mmole HC2H3O2 =5.00 mmole HC2H3O2
1 mL…all 5.0 mmole HC2H3O2 reacts, leaving no H+ from HC2H3O2 in but 5.0 mmole C2H3O2
- in 100 mL
x = [OH-] = 5.3x10-6 MpOH = 5.28 so pH = 8.72
.05 – x x x5.6x10-10 = x2 .05-x
C2H3O2- + H2O OH- + HC2H3O2
Calculate pH when 50.0 mL of 0.100 M HC2H3O2 is titrated with ? mL 0.10 M NaOH.
Kb=10-14=5.6x10-10
1.8x10-5This is the equivilance point
Notice that the pH at the equivalence point of a strong base in a weak acid is always higher (more basic) than 7!
![Page 17: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/17.jpg)
F. 60.0 mL 0.100 M NaOH added60.0 mL 0.100 mmole NaOH = 6.0 mmole NaOH 1 mL5.0 mmole NaOH reacts completely with….
50.0 mL 0.100 mmole HC2H3O2 =5.00 mmole HC2H3O2
1 mL…all 5.0 mmole HC2H3O2 reacts, leaving 5.0 mmole C2H3O2
- in 110 mL and 1.0 mmol OH- from NaOH
[OH-] = 9.1x10-3 M pOH = 2.04 so pH = 11.96
Calculate pH when 50.0 mL of 0.100 M HC2H3O2 is titrated with ? mL 0.10 M NaOH.
Now the major species are: Na+, C2H3O2-, OH-, H2O
2 bases, but C2H3O2- is weak
![Page 18: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/18.jpg)
G. 75.0 mL 0.100 M NaOH added75.0 mL 0.100 mmole NaOH = 7.5 mmole NaOH 1 mL5.0 mmole NaOH reacts completely with….
50.0 mL 0.100 mmole HC2H3O2 =5.00 mmole HC2H3O2
1 mL…all 5.0 mmole HC2H3O2 reacts, leaving 5.0 mmole C2H3O2
- in 125 mL and 2.5 mmol OH- from NaOH
[OH-] = 2.0x10-2 M pOH = 1.07 so pH = 12.30
Calculate pH when 50.0 mL of 0.100 M HC2H3O2 is titrated with ? mL 0.10 M NaOH.
Again the major species are: Na+, C2H3O2-, OH-, H2O
using the stronger of the 2 bases…pH is determined by the OH- excess
![Page 19: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/19.jpg)
Equivalence point 8.72
4.74 was ½ way to the equivalence point. Here, pH = pKa. This is where pH changes least rapidly…a solution with this pH makes a good buffer.
It is important to note that equivalence does not mean neutral.
![Page 20: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/20.jpg)
The titration of a strong base with a strong acid .
![Page 21: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/21.jpg)
The titration of a weak base with a strong acid has a different looking titration curve.
![Page 22: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/22.jpg)
15.9 If a 50.0 mL sample of 0.100 M HCN (Ka=6.2x10-
10) is titrated with 0.10 M NaOH, calculate the pH of the solution.
a. After 8.00 mL of 0.10 M NaOH has been added.8.0 mL 0.100 mmole NaOH =.80 mmole NaOH 1 mL.8 mmole NaOH reacts completely with…50.0 mL 0.100 mmole HCN =5.0 mmole HCN 1 mL…only .8 mmole HCN reacts (1:1 ratio) leaving4.2 mmole H+ from HCN and .8 mmole CN- in 58 mL
x = [H+] = 3.25x10-9 MpH = 8.49
.0724 – x x .0138+x6.2x10-10 = x(.0138+x) .0724-x
HCN H+ + CN-
![Page 23: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/23.jpg)
15.9 If a 50.0 mL sample of 0.100 M HCN (Ka=6.2x10-
10) is titrated with 0.10 M NaOH, calculate the pH of the solution.
B. At the ½ point of the titration
2.5 mmoleNaOH 1 mL = 25 mL NaOH .100 mmole NaOH
Half of the 5.0 mmole HCN is 2.5 mmole HCN (also 2.5 mmole CN-) in what volume?
50.0 mL 0.100 mmole HCN =5.0 mmole HCN 1 mL
x = [H+] = 6.2x10-10 MpH = 9.21
.0333 – x x .0333+x6.2x10-10 = x(.0333+x) .0333-x
HCN H+ + CN-
![Page 24: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/24.jpg)
15.9 If a 50.0 mL sample of 0.100 M HCN (Ka=6.2x10-
10) is titrated with 0.10 M NaOH, calculate the pH of the solution.
C. At the equivalence point
5.0 mmoleNaOH 1 mL = 50 mL NaOH .100 mmole NaOH
All of the 5.0 mmole HCN reacts and leaves 5.0 mmole of the salt CN- in what volume of NaOH? (remember the 1:1 ration HCN:NaOH)
50.0 mL 0.100 mmole HCN =5.0 mmole HCN 1 mL
x = [OH-] = 8.9x10-4 MpH = 10.96
.05 – x x x1.6x10-5 = x2
.05-x
CN- + H2O OH- + HCN
Remember Kb=Kw Ka
![Page 25: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/25.jpg)
If we look back at the previous 2 examples, the equivalence point occurred in both when 50.0 mL of .10 M NaOH reacted with 50 mL of the weak acid.
It is the amount of the acid, not its strength, that determines the equivalence point.
The pH at the equivalence point is determined by the acid strength.
![Page 26: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/26.jpg)
15.10 What is the Ka value for an unknown weak acid if 2.00 mmole of the solid acid is dissolved in 100.0 mL water and the solution is titrated with 0.0500 M NaOH. After 20.0 mL NaOH has been added, the pH is 6.00.
HA H+ + A-
20.0 mL 0.050 mmol NaOH = 1.00 mmol NaOH 1 mL
1.00mmol 1.00mmol
120 mL 120 mL8.33x10-3 -x x 8.33x10-3+x
Since pH = 6 …..[H+] = 1.0x10-6 M
Ka = (1.0x10-6)(8.33x10-3 + 1.0x10-6) (8.33x10-3 – 1.0x10-6)
=1.0x10-6
![Page 27: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/27.jpg)
Determining Equivalence Point
• Either use a pH meter…monitor pH, plot the curve…the center of the vertical region is the equivalence point or…
• Use an indicator. The endpoint is indicated by a color change. Ideally the endpoint is the same as the equivalence point.
![Page 28: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/28.jpg)
Acid-Base indicators• Used to detect the equivalence point in an acid-
base titration• These work on LeChatelier’s Principle
HIn H+ + In-
clear pink• Changes in equilibrium result in color changes.• Indicators are usually weak organic bases or
acids … acid form has different color than conjugate base form.
• Indicators change colors at different pH’s.• We select an indicator that changes color at the
expected equivalence point.
![Page 29: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/29.jpg)
Equivalence point vs endpoint
• Ideally they are the same• Equivalence…when all acid & base
neutralized• Endpoint…when indicator changes color
![Page 30: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/30.jpg)
Hypothetical indicator, HIn with a Ka = 1.8x10-8
HIn H+ + In-
red blue
Ka = [H+][In-] [HIn]
Ka = [In-][H+] [HIn]
If we add indicator to [H+] = .01 M acidic solution…
= 1.0x10-8
.01= 1 . 10 000 000
Predominant color is HIn (red) …as OH- added, equation shifts right (less HIn)As ratio gets closer to 1/10, color change can be detected by the eye.
![Page 31: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/31.jpg)
15.11 Bromthymol blue, an indicator with a Ka=1.0x10-7, is yellow in its HIn form and blue in its In- form. Suppose we put a few drops of this indicator in a strongly acidic solution. If the solution is then titrated with NaOH, at what pH will the indicator color change first be visible?
HIn + OH- H2O + In-
yellow blueKa = 1.0x10-7 = [H+][In-] [HIn]
[H+] 1 10
As ratio gets closer to 1/10, color change can be detected by the eye.
[H+] = 1.0x10-6 pH = -log(1.0x10-6) = 6
Or we can use the Henderson-Hasselbalch equation….
![Page 32: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/32.jpg)
Henderson-HasselbalchpH = pKa + log [base] [acid]
In the previous problem, we assumed a color change is visible when we have a 1/10 ratio
pH = pKa + log [1] [10]
pH = pKa + -1
For bromthymol blue Ka=1.0x10-7 or pKa = 7pH = 7 + -1 = 6
![Page 33: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/33.jpg)
HIn H+ + In-
yellow blue
When a basic solution is titrated, HIn exists initially as In- but as acid is added, more HIn is formed so the color change is visible when
pH = pKa + log [base] [acid]
pH = pKa + log [In-] [HIn]
10 1
So for the same bromthymol blue, titration of a base starts as blue and changes to yellow at….
pH = pKa + log [10] [1]
= pKa + 1 = 7 + 1 = 8
The useful range of bromthymol blue is pKa + 1 or pH range of 6 to 8.
![Page 34: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/34.jpg)
We then choose an indicator so the indicator endpoint and titration equivalence point are close.Choose an indicator for the titration of 100.00 mL of 0.100 M HCl with 0.100 M NaOH.
Both are strong so pH at equivalence pt is 7Since we are titrating an acid, the indicator is in acid form initially so the change in color is observed as…
pH = pKa + log [1] [10]
7 = pKa + -1 pKa = 8 or Ka = 1.0x10-8
![Page 35: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/35.jpg)
Now continue chapter 15 with show for Solubility Equilibria
![Page 36: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/36.jpg)
![Page 37: Acid Base Titrations](https://reader033.fdocuments.us/reader033/viewer/2022061508/56815b1b550346895dc8caab/html5/thumbnails/37.jpg)