Acid-Base Mixtures, Buffers
Transcript of Acid-Base Mixtures, Buffers
![Page 1: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/1.jpg)
Practical aspects of buffers
Chemistry 201
NC State University
Lecture 15
![Page 2: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/2.jpg)
The everyday pH scale To review what pH means in
practice, we consider the pH
of everyday substances that
we know from experience.
Remember that [H+] = 10-pH.
pH + pOH = 14
Therefore that [OH-] = 10pH-14.
![Page 3: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/3.jpg)
Two ways to make a buffer
Add the acid and conjugate base to the solution in a defined proportion.
Method 1 Method 2
Add a strong acid to the weak base (or vice versa) until the desired proportion [A-]/[HA] is obtained.
![Page 4: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/4.jpg)
Buffer strength The ratio [A-]/[HA] should be as close as possible 1:1,
but the amounts may vary. To make a stronger buffer
you simply need to increase the amount of each
component. Let’s investigate.
Suppose we add 1 mL of 1 M HCl to 1 liter of solution.
The final concentration of HCl is 0.001 M.
![Page 5: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/5.jpg)
Buffer strength The ratio [A-]/[HA] should be as close as possible 1:1,
but the amounts may vary. To make a stronger buffer
you simply need to increase the amount of each
component. Let’s investigate.
Suppose we add 1 mL of 1 M HCl to 1 liter of solution.
The final concentration of HCl is 0.001 M. pH = 3
![Page 6: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/6.jpg)
Buffer strength
The ratio [A-]/[HA] should be as close as possible 1:1, but the
amounts may vary. To make a stronger buffer you simply
need to increase the amount of each component. Let’s
investigate.
Suppose we add 1 mL of 1 M HCl to 1 liter of solution. The
final concentration of HCl is 0.001 M. pH = 3
Suppose we add 1 mL of 1 M HCl to 1 liter of 10 mM optimal
phosphate buffer solution (pKa = 7.2) solution. The final
concentration of HCl is 0.001 M. pH = pKa + log10([A-]/[HA])
![Page 7: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/7.jpg)
Buffer strength
Keeping in mind that the unbuffered solution in this example
([HCl] = 0.001 M) would be pH = 3
Suppose we add 1 mL of 1 M HCl to 1 liter of 10 mM
optimal phosphate buffer solution (pKa = 7.2) solution. The
final concentration of HCl is 0.001 M.
pH = pKa + log10([A-]/[HA])
[A-] = 0.005 – 0.001 = 0.004 [HA] = 0.005 + 0.001 = 0.006
pH = 7.2 + log10(0.004/0.006) = 7.02
If the target pH = 7.2 (i.e. pH = pKa) then this buffer is too
weak. An error of 0.2 pH units could be significant.
![Page 8: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/8.jpg)
Buffer strength
Keeping in mind that the unbuffered solution in this example
([HCl] = 0.001 M) would be pH = 3
Suppose we add 1 mL of 1 M HCl to 1 liter of 100 mM
optimal phosphate buffer solution (pKa = 7.2) solution. The
final concentration of HCl is 0.001 M.
pH = pKa + log10([A-]/[HA])
[A-] = 0.05 – 0.001 = 0.049 [HA] = 0.05 + 0.001 = 0.051
pH = 7.2 + log10(0.049/0.051) = 7.18
If the target pH = 7.2 (i.e. pH = pKa) then this buffer is
reasonable. The difference is only -0.02.
![Page 9: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/9.jpg)
Buffer strength
Keeping in mind that the unbuffered solution in this example
([HCl] = 0.001 M) would be pH = 3
Suppose we add 1 mL of 1 M HCl to 1 liter of 300 mM
optimal phosphate buffer solution (pKa = 7.2) solution. The
final concentration of HCl is 0.001 M.
pH = pKa + log10([A-]/[HA])
[A-] = 0.150 – 0.001 = 0.149 [HA] = 0.150 + 0.001 = 0.151
pH = 7.2 + log10(0.149/0.151) = 7.194
If the target pH = 7.2 (i.e. pH = pKa) then we would say that
this buffer is definitely strong enough, difference = -0.006
![Page 10: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/10.jpg)
You can create a buffer either by adding the acid and
Its conjugate base to a solution or by titrating in strong
base to acid (or vice versa). Remember, regardless of
the method used to prepare it:
The buffering strength is maximum when [HA] = [A-]
The buffering range is considered to extend from
[HA] / [A-] = 0.1 to [HA] / [A-] = 10. This is subjective.
Wertz suggests 0.01 to 100 is an acceptable range.
Titrating to make a buffer
![Page 11: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/11.jpg)
Understanding the titration curve
Starting point [HA] = [HA]0
Suppose we want to make a buffer by titrating [OH-].
We cannot use the H-H equation initially. We do not know
the concentration of [A-]. Instead at this initial point we will
use the other form of the
equilibrium constant and
make an ICE table.
Added [OH-] = 0
![Page 12: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/12.jpg)
Understanding the titration curve
Starting point [HA] = [HA]0
Suppose we want to make a buffer by titrating [OH-].
We cannot use the H-H equation initially. We do not know
the concentration of [A-]. Instead at this initial point we will
use the other form of the
equilibrium constant and
make an ICE table.
Added [OH-] = 0
![Page 13: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/13.jpg)
Understanding the titration curve
Starting point [HA] = [HA]0
We can calculate x = [H+]
and therefore the pH from
the equilibrium constant.
Added [OH-] = 0
![Page 14: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/14.jpg)
Understanding the titration curve
Maximum buffer capacity
[HA] = [A-].
When we have a buffer we can use the Hendersen-Hasselbach
equation. This is nice since it is the simplest treatment of the
acid-base equilibrium. In the case shown we have pH = pKa.
Added [OH-] = 1/2 [HA]0
![Page 15: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/15.jpg)
Understanding the titration curve
Maximum buffer capacity
[HA] = [A-] when
[OH-] ~ 0.5 [HA]0
The buffer range is defined as approximately from:
pH = pKa – 1 R = [A-]/[HA] = 0.1 [OH-] ~ 0.091 [HA]0
to
pH = pKa + 1 R = [A-]/[HA] = 10 [OH-] ~ 0.91 [HA]0
Buffer region
![Page 16: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/16.jpg)
Understanding the titration curve
Once the solution moves outside the buffer range the pH shoots
up. The equivalence point is reached when the added is equal
to the original acid concentration, i.e. [OH-] ~ [HA]0
At this point one can no longer
use the H-H equation. Instead,
we assume that [A-] ~ [HA]0
Then we use the base equil-
-ibrium:
Note that pKb = 14 - pKa
Buffer region
![Page 17: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/17.jpg)
Types of buffers There are inorganic buffers, e.g. phosphate, but there are
many more organic buffers. In fact, the number of buffers
is staggering.
Organic buffers: Tris, HEPES, MOPS, MES…
“Biological” buffers: citrate, acetate, carbonate, malonate,
Proteins themselves are polyelectrolytes and therefore
tend to the buffer the solution they are in. This can have
important physiological impact (e.g. hemoglobin).
![Page 18: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/18.jpg)
Tris buffer Tris(hydroxymethyl)aminomethane), is
an organic buffer with the formula
(HOCH2)3CNH2. Tris has a pKa = 8.07.
The buffer range is 7.07 – 9.07.
It is is widely used as a component for
solutions of nucleic acids, proteins and for
any application in which phosphate is not a
good choice.
For example, calcium phosphate has a low solubility product,
Which means that phosphate buffers are a poor choice in
any application where calcium is present.
Important point: Tris can react with aldehydes since it is a
primary amine. Choice of buffer should done by consulation
of the chemical interactions in your application.
![Page 19: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/19.jpg)
Other organic buffers
HEPES: pKa = 7.5
MOPS: pKa = 7.2
![Page 20: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/20.jpg)
Citrate buffer
Citric acid crystals
under polarized light
Citric acid is found in abundance
in citrus fruits. It is also part of the
citric acid cycle in biochemistry.
It is a triprotic acid, with three
carboxylic acid groups as seen
by its structure (on the right).
pKa1 = 3.14
pKa2 = 4.75
pKa3 = 6.40
![Page 21: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/21.jpg)
Citrate buffer: species in solution
The middle H atom has the lowest
pKa. This is because the neighbor-
ing OH group has an electron with-
drawing effect that stabilizes the
negative charge created.
![Page 22: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/22.jpg)
Amino acids are amphipathic
All amino acids contain the carboxylic acid and amino
group. These have very different pKa values so the amino
acids have a doubly charged form (zwitterion) at pH 7.
In proteins only the N- and C-terminus have these pKas.
Amino acids can be classified in part according to the pKa
of their side chains.
![Page 23: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/23.jpg)
Amino acid side chain pKa
Proteins are made of up of a
number of “titratable” amino
acids. At pH 7 the terminal
carboxyl, aspartate and
glutamate have a negative
charge. Terminal amino,
lysine and arginine are
positively charged. Others
are neutral, but can be
charged due to interactions
within the protein. The pKa
of any of these groups may
be altered by the protein.
![Page 24: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/24.jpg)
The isoelectric point of a protein pI
Proteins have many titratable groups on their surface. It is
not possible to define a single pH since all of the groups
have different pKa values. However, we can define the point
at which protein is neutral in charge: the isoelectric point.
At the isoelectric point the protein has 0 net charge, which
means that there as many positive as negative groups on
the surface.
The isoelectric point concept applies to polymers,
nanoparticles etc. Any macromolecule can be described in
terms of its overall charge.
IMPORTANT: When pH = pI a macromolecule has a neutral
surface. This is the minimum stability point. Macromolecules
tend to precipitate at this poin.
![Page 25: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/25.jpg)
Hemoglobin is the most abundant protein inside of red blood cells and accounts for one-third of the mass of the cell. During the conversion of CO2 into HCO3
-, H+ liberated in the reaction are buffered by hemoglobin, which is reduced by the dissociation of oxygen. This buffering helps maintain normal pH. The process is reversed in the pulmonary capillaries to re-form CO2, which then can diffuse into the air sacs to be exhaled into the atmosphere.
Hemoglobin as a buffer
![Page 26: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/26.jpg)
As with the phosphate buffer, a weak acid or weak base captures the free ions, and a significant change in pH is prevented. Bicarbonate ions and carbonic acid are present in the blood in a 20:1 ratio if the blood pH is within the normal range. With 20 times more bicarbonate than carbonic acid, this capture system is most efficient at buffering changes that would make the blood more acidic. This is useful because most of the body’s metabolic wastes, such as lactic acid and ketones, are acids. Carbonic acid levels in the blood are controlled by the expiration of CO2 through the lungs.
Bicarbonate (hydrogen carbonate): an important regulator in the body
![Page 27: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/27.jpg)
The role of carbonic anhydrase
The enzyme does not change the equilibrium, but it accelerates the Rate of reaching the equilibrium on each side of a membrane.
![Page 28: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/28.jpg)
Acid/Base Mixtures : Reactions
• How do you calculate pH after an acid/base reaction occurs?
Text : Section 7.3
![Page 29: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/29.jpg)
What is the pH when:
a) 25 mL of 0.30 M HCl are added
to 35 mL of 0.20 M NaOH?
b) 15 mL of 0.25 M HClO4 are added
to 25 mL of 0.20 M NaOH?
Examples: Strong acids and bases
![Page 30: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/30.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
![Page 31: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/31.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
Step 1. Calculate dilutions. First add the volumes
Total volume = 25 mL + 35 mL = 60 mL
Calculate concentrations in the solution
![Page 32: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/32.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
Step 2. Write a balanced chemical reaction for the limiting
reaction and the excess reaction.
Limiting reaction
Species HCl NaOH Na+ Cl-
Initial 0.125 0.117 0.0 0.0
Difference -x -x x x
Final 0.125-x 0.117-x x x
![Page 33: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/33.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
Step 2. Write a balanced chemical reaction for the limiting
reaction and the excess reaction.
Limiting reaction
Excess reaction
Species HCl NaOH Na+ Cl-
Initial 0.125 0.117 0.0 0.0
Difference -0.117 -0.117 0.117 0.117
Final 0.008 0.0 0.117 0.117
Species HCl H+ Cl-
Initial 0.008 0.0 0.0
Final 0.0 0.008 0.008
![Page 34: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/34.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
Recognize that both HCl and NaOH are strong acid/base,
respectively. Therefore, rather than find the equilibrium
constant, we assume that the reaction goes to completion.
In this case we find the limiting reagent which is NaOH.
In the general case we could include both H+ and OH- on
the right hand side. We may not know initially which one
is going to dominate, since we must first calculate the
limiting reagent.
![Page 35: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/35.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
![Page 36: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/36.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
Short cut method:
Step 1. calculate number of moles of each reagent
![Page 37: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/37.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
Short cut method:
Step 1. calculate number of moles of each reagent
Step 2. calculate the total volume (0.025 + 0.035 = 0.060 L)
Step 3. make a table considering only H+ and OH-
Species H+ OH- H2O
Initial 7.5 7.0 0.0
Difference -7.0 -7.0 +7.0
Final 0.5 0.0 7.0
![Page 38: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/38.jpg)
What is the pH when 25 mL of 0.30 M HCl are
added to 35 mL of 0.20 M NaOH?
Examples: Strong acids and bases
Short cut method:
Step 4. calculate the final concentration of [H+ ]
Step 5. calculate the pH
![Page 39: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/39.jpg)
15 mL of 0.25 M HClO4 are added to 25 mL of
0.20 M NaOH?
Examples: Strong acids and bases
![Page 40: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/40.jpg)
15 mL of 0.25 M HClO4 are added to 25 mL of
0.20 M NaOH?
Examples: Strong acids and bases
Step 1. Calculate dilutions. First add the volumes
Total volume = 25 mL + 15 mL = 40 mL
Calculate concentrations in the solution
![Page 41: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/41.jpg)
15 mL of 0.25 M HClO4 are added to 25 mL of
0.20 M NaOH?
Examples: Strong acids and bases
Step 2. Write a balanced chemical reaction for the limiting rxn.
Excess rxn is
Species HClO4 NaOH Na+ ClO4-
Initial 0.0937 0.125 0.0 0.0
Difference -0.0937 -0.0937 0.0937 0.0937
Final 0.0 0.0313 0.0937 0.0937
Species NaOH Na+ OH-
Initial 0.0313 0.0 0.0
Final 0.0 0.0313 0.0313
![Page 42: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/42.jpg)
Strong Strong
Acid Base
Weak Weak
Acid Base
use rxn table
goes 100%
calc pH or pOH
![Page 43: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/43.jpg)
What is the pH when 50. mL of 0.25 M NaOH are
added to 40. mL of 0.20 M HF?
Examples: One strong and one weak
![Page 44: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/44.jpg)
What is the pH when 50.0 mL of 0.25 M NaOH are
added to 40.0 mL of 0.20 M HF?
Examples: One strong and one weak
Step 1. Calculate dilutions. First add the volumes
Total volume = 50 mL + 40 mL = 90 mL
Calculate concentrations in the solution
![Page 45: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/45.jpg)
What is the pH when 50.0 mL of 0.25 M NaOH are
added to 40.0 mL of 0.20 M HF?
Examples: One strong and one weak
Step 2. Write a balanced chemical reaction and determine
the form of the equilibrium constant. Make a reaction table.
![Page 46: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/46.jpg)
What is the pH when 50.0 mL of 0.25 M NaOH are
added to 40.0 mL of 0.20 M HF?
Examples: One strong and one weak
Step 2. contd. We calculate 1/Kb from the data in the tables
Ka = 6.6 x 10-4.
Step 3. Make a reaction table.
Species HF OH- F-
Initial 0.0888 0.139 0.0
Difference -x -x x
Final 0.0888-x 0.139-x x
![Page 47: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/47.jpg)
What is the pH when 50.0 mL of 0.25 M NaOH are
added to 40.0 mL of 0.20 M HF?
Examples: One strong and one weak
Step 4. Solve for x
![Page 48: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/48.jpg)
What is the pH when 50.0 mL of 0.25 M NaOH are
added to 40.0 mL of 0.20 M HF?
Examples: One strong and one weak
Step 5. Calculate OH- and pOH.
We see from the table that [OH-] = 0.139 – x = 0.0511
BIG PICTURE: This example is very high on the titration
Curve. We can get [OH-] approximately from
[OH-] = [OH-]0 – [HF] 0 = 0.139 – 0.888 = 0.051
The additional information from the ICE is in the third
decimal place.
![Page 49: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/49.jpg)
Strong base exceeds weak acid
The key point of the previous problem is that we are no longer
in the buffer range. We cannot use H-H in this case. Since:
[OH-]0 > [HA]0
While Kb still applies it is often
unnecessary since [OH-] is in
excess.
If you need to use Kb
then use:
Buffer region
![Page 50: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/50.jpg)
Strong Strong
Acid Base
Weak Weak
Acid Base
use rxn table
goes 100%
calc pH or pOH
use rxn table
goes 100%
buffer : H-H
base : pOH
![Page 51: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/51.jpg)
What is the pH when 25.0 mL of 0.40 M HCl are
added to 40.0 mL of 0.30 M NH3?
Examples: One strong and one weak
![Page 52: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/52.jpg)
What is the pH when 25.0 mL of 0.40 M HCl are
added to 40.0 mL of 0.30 M NH3?
Examples: One strong and one weak
The total volume is 65 mL so the final concentrations
are:
[HCl] = 25/65(0.40 M) = 0.154 M
[NH3] = 40/65(0.30 M) = 0.184 M
In this case the [HCl] < [NH3] so this will make a buffer.
Assume that the strong acid reacts completely then at
equilibrium we have:
[NH3] = 0.184 – 0.154 M = 0.03 M and [NH4+] = 0.154 M
![Page 53: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/53.jpg)
Examples: One strong and one weak
![Page 54: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/54.jpg)
Strong Strong
Acid Base
Weak Weak
Acid Base
use rxn table
goes 100%
calc pH or pOH
use rxn table
goes 100%
buffer : H-H
base : pOH
use rxn table
goes 100%
buffer : H-H
acid : pH
![Page 55: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/55.jpg)
For a reaction of a weak acid and a weak base
we need to calculate the equilibrium constant
from the known Ka’s. We take the example of
ammonium acetate.
We see that the overal reaction is composed
of two acid-base equilibria
Examples: Weak acid and weak base
for acetate
for ammonia
![Page 56: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/56.jpg)
Therefore, the overall equilibrium constant for
the reaction is
Now, that we can see how to calculate the
Equilibrium constant, we can solve any acid-base
Reaction problem using the standard methods
That we have used.
Step. 1. determine dilutions
Step. 2. set up the reaction table
Step. 3. solve for the unknown and then calculate pH
Examples: Weak acid and weak base
![Page 57: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/57.jpg)
20.0 mL of 0.30 M NaH2PO4 was added to
20.0 mL of 0.30 M NaHS. What are the concs.
of all species at equil.?
Examples: Weak acid and weak base
![Page 58: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/58.jpg)
20.0 mL of 0.30 M NaH2PO4 was added to
20.0 mL of 0.30 M NaHS. What are the concs.
of all species at equil.?
Examples: Weak acid and weak base
Solution: Look up the Ka for each reaction involved
in this acid-base equilibrium.
![Page 59: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/59.jpg)
Examples: Weak acid and weak base
Species
Initial 0.15 0.15 0.0 0.0
Difference -x -x x x
Final 0.15-x 0.15-x x x
![Page 60: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/60.jpg)
Strong Strong
Acid Base
Weak Weak
Acid Base
if not conjugates
calc. K
calc concs.
if conjugates
use H-H
calc pH
![Page 61: Acid-Base Mixtures, Buffers](https://reader034.fdocuments.us/reader034/viewer/2022051521/58677a231a28ab09568b6e9b/html5/thumbnails/61.jpg)
Goals • Calculate the pH of acid/base mixtures
• Calculate the pH at any point in a titration
• Calculate the concentration of all species in acid/base mixtures at equilibrium