Achieving Precision Irrigation with Reduced Costs
Transcript of Achieving Precision Irrigation with Reduced Costs
![Page 1: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/1.jpg)
Achieving Precision Irrigation with Reduced Costs
Blair Stringam PhD.
(Irrigation Engineer)
![Page 2: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/2.jpg)
Where and When to IrrigateIrrigate the right amountAt the right time
Irrigate Here
![Page 3: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/3.jpg)
A Bucket Will Hold so Much Water
![Page 4: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/4.jpg)
Soil Water Properties
Ma
Mw
Ms
Mt
solids
water
airVa
Vw
VsNeed to know about the soil
texture to determine how much water the soil can hold
![Page 5: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/5.jpg)
Soil Water Holding CapacityUnderstand your
soil
Finer soils tend to have greater water holding capacity
![Page 6: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/6.jpg)
How is the water used?
Where does the water go?
Evaporation Transpiration Run off Deep Percolation
How Much Water is Needed?
![Page 7: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/7.jpg)
Do plant roots need air?
Irrigate to fill the root Zone.
How Much Water is Needed?
![Page 8: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/8.jpg)
Over Fill the Root ZoneLose WaterLose fertilizerLose chemicalsWaste Energy / FuelWaste laborEnvironmental concerns
![Page 9: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/9.jpg)
Soil Water
gravitational
hygroscopic
saturation
field capacity
wilting point
capillary
![Page 10: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/10.jpg)
Fill the Root ZoneA root zone will only
hold so much waterIf water is out of the root
zone it is not benefiting your crop
![Page 11: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/11.jpg)
Research Report 773
![Page 12: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/12.jpg)
Describe ways to use drip components in at reduced costs
Smeal et al.
![Page 13: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/13.jpg)
EmittersThe emitters control how fast the water
drips out onto the soil.Usually require a specific pressure range
to achieve consistent discharges
![Page 14: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/14.jpg)
Does not need a filter (save $$)The emitter is configured to allow debris to pass by
Does not need a pump (save $$)Works on a furrow irrigated fieldSave on capital costsSave on operation costs
New Drip Technology
![Page 15: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/15.jpg)
Need to provide a constant head for the water supplyNeed to provide a least a 50 cm head
New Drip System
![Page 16: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/16.jpg)
Design Advantages
Low head pressure
Low cost – capital and operating
Low maintenance
Low tech
High efficiency
Parts are easy to obtain
Use salvage parts
Bubbler Irrigation Low Inputs – High Efficiency
![Page 17: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/17.jpg)
By reducing pressure requirements, a low head bubbler system allows ‘least cost’ pipe and fittings to be used.
The pressure normally required to compensate for friction losses and ground level variations is reduced by adjusting the elevation at each outlet to control flow
Minor rises & dips in grade are adjusted for at the outlets
Minor leaks in the system become insignificant due to the lower pressure
Open pipe discharge eliminates the need for fine filtration
Because the system is not closed, no anti-siphon, back flow prevention or vacuum break is needed
No filter is required No pump is required
![Page 18: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/18.jpg)
Getting Started
-Use a barrel to provide a constant low pressure for the system
-The barrel delivers water into the main lateral(s)
-The supply for the barrel can be a large water storage tank, cistern, pressurized system or any gravity fed or pumped water delivery
-Whatever the source, some means of maintaining a constant static level in the barrel is required
![Page 19: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/19.jpg)
A main lateral valve is desirable.For multiple mains from a manifold distribution, valves are required
![Page 20: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/20.jpg)
Main & laterals 3”-4”Drain pipe or inexpensiveFlex wall pipe buriedFreeze depths N/A
To static head supply
Laterals buried down centerBetween every other row
To additionallaterals
Typical orchard or vineyard layout
![Page 21: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/21.jpg)
A Flow Distribution Box will equalize flow to multiple lateral
![Page 22: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/22.jpg)
-With main & lateral trenches still open, install lines to each plant using ½ inch poly irrigation tubing
--Leave sufficient tubing length at the plant to extend above height of the static head supply
![Page 23: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/23.jpg)
To static head supply
To additionallaterals
½ “ Poly-tubing
Poly tubing can be buried in a trench or pulled through a water or air jetted bore hole
![Page 24: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/24.jpg)
Buried mainline with riser to tree/plant
![Page 25: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/25.jpg)
To static head supply
To additionallaterals
½ “ Poly-tubing
In landscapes, tubing can be routed in various direction toward the plants
![Page 26: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/26.jpg)
Use a spade drill bit
A bit with edge points is desirable
The ploy pipe that is goingto be inserted into the mainlineshould be cut at an angle
![Page 27: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/27.jpg)
INSTALLATION REQUIREMENTS
You need about 3 feet of head to operate the system
Make sure the mainline and laterals do not have high points in the line.
![Page 28: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/28.jpg)
Immediately after drilling a hole in the lateral pipe install ½ tubing. The tubing will swell and seal the connection
![Page 29: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/29.jpg)
-Determine the fixed static level in the lateral by raising or lowering the tubing endto the point where water stands just at the opening. This level will vary from one tube to another based on head loss due to field elevation and friction.
-When all the tubing end locations are fixed, go back and lower each tubing anequal distance that will achieve the desired flow rate. Fix this location ona stake or rod with wire or similar tie.
![Page 30: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/30.jpg)
May calibrate for different discharges
![Page 31: Achieving Precision Irrigation with Reduced Costs](https://reader033.fdocuments.us/reader033/viewer/2022051204/6277f71eccfca927c76c009a/html5/thumbnails/31.jpg)
Summary: If well designed, managed, and maintained,low-tech, low-cost, low head bubbler irrigation systems can be used effectively in various cropping plans or landscapes.