Ace Model Cv103b Ci Di Ball Check Valve. Flange Ends

ACE CAST IRON / DUCTILE IRON BALL CHECK VALVE MODEL: CV103-B MATERIALS No. Part Name Materials 1 Body Ductile Iron to BS2789 or Cast Iron to BS 1452 Gr.220 min. (Epoxy coated ineternally and externally.) 2 Ball Float NBR / Synthetic plastic or aluminum alloy 3 Bolt Carbon Steel with Zinc Plating 4 Nut Carbon Steel with Zinc Plating 5 Gasket NBR or EPDM 6 Bonnet Cast Iron / Ductile Iron 7 Washer NYL 8 Plug Carbon Steel with Zinc Plating APPLICATIONS - Sewage, heavy, thick and viscous fluids. - Any water drainages and water supplies systems. Marketed by: Singer Valves Corporation Limited Tel.: (852) 2950 9916, 2950 9551 Fax: (852) 2950 9775 E-mail: [email protected] Larger sizes and higher working pressure are available on request. RIGHT IS RESERVED TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICES DUE TO MANUFACTURER CONTINUOUS DEVELOPMENT AND IMPROVEMENT IN DESIGN, MATERIALS, AND MANUFACTURING PROCESS. WORKING PRESSURE - 16 bar (232 psi) normal; Higher working pressure are available on request. OPERATION - Fluid pressure push the ball that slides through internal guides, geeting into the lateral nozzle of thr valve body - The ball falls down and is placed in the inlet orifice of the valve when no pressure acting on the inlet. SPECIFICATION & CONSTRUCTION - Flanged ends to BS4504 PN16 DIMENSIONS DN D D1 D2 L b H f Z-d 50 165 125 99 200 18 140 3 4-19 80 200 160 132 260 19 162 3 8-19 100 220 180 156 300 19 184 3 8-19 150 285 240 211 400 19 227 3 8-23 200 340 295 266 500 20 261 3 12-23

Upload
satish-kumar-maurya
Category

Documents
view
224
download
8

Embed Size (px):

description

ce Model Cv103b Ci Di Ball Check Valve. Flange Ends

Transcript of Ace Model Cv103b Ci Di Ball Check Valve. Flange Ends

ACE

CAST IRON / DUCTILE IRON BALL CHECK VALVE MODEL: CV103-B

MATERIALS No. Part Name Materials 1 Body Ductile Iron to BS2789 or

Cast Iron to BS 1452 Gr.220 min. (Epoxy coated ineternally and externally.)

2 Ball Float NBR / Synthetic plastic or aluminum alloy

3 Bolt Carbon Steel with Zinc Plating4 Nut Carbon Steel with Zinc Plating5 Gasket NBR or EPDM 6 Bonnet Cast Iron / Ductile Iron 7 Washer NYL 8 Plug Carbon Steel with Zinc Plating

APPLICATIONS - Sewage, heavy, thick and viscous fluids. - Any water drainages and water supplies systems.

Marketed by: Singer Valves Corporation Limited Tel.: (852) 2950 9916, 2950 9551 Fax: (852) 2950 9775 E-mail: [email protected]

Larger sizes and higher working pressure are available on request. RIGHT IS RESERVED TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICES DUE TO MANUFACTURER CONTINUOUS DEVELOPMENT AND IMPROVEMENT IN DESIGN, MATERIALS, AND MANUFACTURING PROCESS.

WORKING PRESSURE - 16 bar (232 psi) normal; Higher working pressure

are available on request. OPERATION - Fluid pressure push the ball that slides through

internal guides, geeting into the lateral nozzle of thr valve body

- The ball falls down and is placed in the inlet orifice of the valve when no pressure acting on the inlet.

SPECIFICATION & CONSTRUCTION - Flanged ends to BS4504 PN16 DIMENSIONS

DN D D1 D2 L b H f Z-d

50 165 125 99 200 18 140 3 4-19

80 200 160 132 260 19 162 3 8-19

100 220 180 156 300 19 184 3 8-19

150 285 240 211 400 19 227 3 8-23

200 340 295 266 500 20 261 3 12-23