Ace Glassnow offers a

full line ofDuran® laboratory bottles and caps

www.aceglass.com

DWK Life Sciences GmbH

2

5539 BOTTLE Laboratory, GL Thread Chemically resistant and stable laboratory bottles, fabricated from borosilicate glass. Supplied graduated, with or without red PBT cap and removable pouring ring1 that allows drip-free operation. Red cap has PTFE liner. For use up to 180ºC. Not suitable for vacuum or pressure use. Can be hot air sterilized or autoclaved. For extra caps, see 7622.

w/Red Cap w/o CapCapacity,

mLApprox.

Cap., Oz.GL Thread

SizeO.D.,mm

Height, mmw/Cap

CaseQty.

OrderCode

OrderCode

251 .87 25 36 74 10 5539-05 5539-50 50 1.3 32 46 91 10 5539-08 5539-52 100 4 45 56 105 10 5539-10 5539-54 250 9 45 70 143 10 5539-15 5539-56 500 16 45 86 181 10 5539-18 5539-58 1000 33 45 101 230 10 5539-22 5539-60 2000 66 45 136 265 10 5539-25 5539-62 5000 169 45 182 335 1 5539-30 5539-6410000 338 45 227 415 1 5539-35 5539-6615000 507 45 268 450 1 5539-41 5539-6820000 676 45 288 510 1 5539-44 5539-70

125 mL size NOT supplied with ring.

5539 BOTTLE Laboratory, GL Thread Same as bottle listed above except with blue polypropylene cap. Temperature range to 140ºC.

Capacity,mL

Approx.Cap., Oz.

GL ThreadSize

O.D.,mm

Height, mmw/Cap

CaseQty.

OrderCode

100 4 45 70 105 10 5539-80 500 16 45 86 181 10 5539-82 1000 33 45 101 230 10 5539-84 2000 66 45 136 265 10 5539-86 5000 169 45 186 335 1 5539-88

5539 BOTTLE Laboratory, Safety Coated, GL Thread Chemically resistant and stable laboratory bottles, fabricated from borosilicate glass and plastic coated for protection against mechanical damage and to prevent leakage of contents should the glass break. Supplied graduated with or without red PBT cap and removable pouring ring that allows drip-free operation. Cap has PTFE liner. For use up to 135°C. Not suitable for vacuum or pressure use. Height measurement is with cap. Autoclavable. For extra caps, see 7622.

w/Red Cap w/o Cap

Capacity,mL

GL ThreadSize

O.D.,mm

Height,. mmw/Cap

CaseQty.

OrderCode

OrderCode

100 45 56 105 10 5539-105 5539-150 250 45 70 143 10 5539-115 5539-152 500 45 86 181 10 5539-118 5539-1541000 45 101 230 10 5539-122 5539-1562000 45 136 265 10 5539-125 5539-1585000 45 182 335 1 5539-130 5539-160

All Ace/Duran® bottles have an eight-digit retrace code, and the corresponding Duran number, the batch and quality certificate for every Duran bottle can be obtained.

3

5539 BOTTLE Laboratory, Ambered, GL Thread Chemically resistant and stable laboratory bottles, fabricated from borosilicate glass and ambered for protection of liquids sensitive to light. Supplied graduated with or without red PBT cap and removable pouring ring that allows drip-free operation. Cap has PTFE liner. For use up to 180°C. Not suitable for vacuum or pressure use. Height measurement is with cap. Autoclavable or good for hot air sterilization. For extra caps, see 7622.

w/Red Cap w/o CapCapacity,

mLGL Thread

SizeO.D.,mm

Height,. mm w/Cap

CaseQty.

OrderCode

OrderCode

25* 25 36 74 10 5539-205 5539-250 50 32 46 91 10 5539-208 5539-252 100 45 56 105 10 5539-210 5539-254 250 45 70 143 10 5539-215 5539-256 500 45 86 181 10 5539-218 5539-258 1000 45 101 230 10 5539-222 5539-260 5000 45 182 335 1 5539-230 5539-26210000 45 227 415 1 5539-235 5539-26415000 45 268 450 1 5539-241 5539-26620000 45 288 510 1 5539-244 5539-268

*25 mL size NOT supplied with ring.

5539 BOTTLE Laboratory, Netted, GL Thread Chemically resistant and stable laboratory bottles, fabricated from borosilicate glass and netted for protection against mechanical damage. Supplied graduated with blue polypropylene cap and removable pouring ring that allows drip-free operation. For use to 140°C. Suitable for vacuum or pressure use (21 psig). Height measurement is with cap. For extra caps, see 7622.

Capacity,mL

GL ThreadSize

O.D.,mm

Height,. mm w/Cap

CaseQty.

OrderCode

250 45 70 143 1 5539-216 500 45 86 181 1 5539-2191000 45 101 230 1 5539-224

5557 BOTTLE Vacuum/Pressure Resistant, GL Thread Chemically resistant and stable laboratory bottles, approved for use under vacuum pressures up to 1.5 bar (21 psig) at ambient. Supplied bottle only, with blue graduations, without cap or pouring ring. For cap and ring, see 7622. Available clear, amber or plastic coated. Temperature range up to a maximum of 135°C for coated version, 500°C for clear and amber versions. See temperature ratings for caps.

Capacity,mL Type

GL ThreadSize

O.D.,mm

Height,.mm

CaseQty.

OrderCode

1000 Clear 45 101 230 10 5557-201000 Amber 45 101 230 10 5557-1211000 Plastic Coated 45 101 230 10 5557-214

Order caps and pouring rings separately.

Vacuum/Pressure Rated

4

5559 BOTTLE Wide Mouth, Clear or Amber Borosilicate glass wide-neck bottle with GLS 80 quick-release polypropylene blue closure for use up to 140°C. Graduated. See 7622 for GLS80 caps and pour rings.

Capacity,mL Type

O.D.,mm

Height,.mm

CaseQty.

OrderCode

500 Clear 101 148 10 5559-05 1,000 Clear 101 218 10 5559-07 5,000 Clear 182 311 1 5559-0910,000 Clear 227 395 1 5559-2020,000 Clear 288 483 1 5559-24 500 Amber 101 148 10 5559-205 1,000 Amber 101 218 10 5559-207 5,000 Amber 182 311 1 5559-20910,000 Amber 227 395 1 5559-22020,000 Amber 288 483 1 5559-224

5559 BOTTLE Wide Mouth, Safety Coated Clear borosilicate glass wide-neck bottle with GLS 80 quick-release polypropylene blue closure. For use up to 135°C. Graduated. See 7622 for GLS80 caps and pour rings.

Capacity,mL Type

O.D.,mm

Height,.mm

CaseQty.

OrderCode

500 Clear 101 148 10 5559-300 1,000 Clear 101 218 10 5559-302 5,000 Clear 182 311 1 5559-30410,000 Clear 227 395 1 5559-30620,000 Clear 288 483 1 5559-308

5560 BOTTLE Laboratory, Square, GL Thread Chemically resistant square bottles, fabricated from borosilicate glass. Graduated with polypropylene blue cap and removable pouring ring that allows drip-free operation. For use up to 140°C. Not suitable for vacuum or pressure use. Can be hot air sterilized. Height measurement is with cap.

Capacity,mL

GL ThreadSize

O.D.,mm

Height,.mm

CaseQty.

OrderCode

100 32 50 109 10 5560-10 250 45 64 143 10 5560-15 500 45 78 181 10 5560-201000 45 94 222 10 5560-25

5

5414 RESERVOIR Graduated Glass, Reagent Heavy-wall borosilicate glass bottle with three PTFE valves with Tefzel keys. Pressure-tight PTFE coated Fluoron forms a seal within cap; hence, fluid contact is restricted to glass, PTFE and Tefzel. The three individually controlled valves permit the application of gas under pressure to the bottle for venting, flushing, or delivery of the bottle contents to one or two points. Bottles may be pressurized in isolation or in series with the other bottles. One of the valves may be used to allow corrosive fumes to be vented safely. Rated to 14 psi at ambient; must be adequately shielded when under pressure. Each bottle is provided with a three-valve, 1/4-28UNF cap ideal for use with our 5859 and 5855 tubing connectors.

Codes -07 thru -15 are clear glass reagent bottles (also available ambered).

Codes -137 thru -141 are U.V. resisting plastic coated solvent delivery bottles.

Reagent Reservoir, Clear, w/Netting & Cap Solvent Reservoir, Coated, w/Cap

Cap., mL Qty. Order Code Cap., mL Qty. Order Code 250 1 5414-07 250 1 5414-137 500 1 5414-10 500 1 5414-1391000 1 5414-15 1000 1 5414-141

Accessory Items Qty. Order CodeCap only, with valves 1 5414-502Filter, Sparger, PTFE/Stainless Steel, 10 micron 1 5414-31Filter, Bottle Bottom, PTFE, 10 micron 1 5414-32Filter, Bottle Bottom, Polypropyline, 20 micron 1 5414-33Filtered Check Valve, PTFE, 10 micron 1 5414-34

For cap only with valves, order 5414-502

7622 CAPS/POURING RINGS for GL Threaded Bottles Screw caps and pouring rings for use with GL threads. Red caps have PTFE liner, all others are with lip seal. For 5539, 5557, 5559, and 5560 bottles.

CAPSFor Thread

Size Material ColorTemperature

Range, °CO.D.,mm

Height,mm

CaseQty.

OrderCode

25 Polypropylene Blue -40 to +140 33 19 10 7622-0225 Polybutylene Teraphthalate Red -45 to +180 33 19 10 7622-1425 Polybutylene Teraphthalate Red -45 to +180 33 19 1 7622-11432 Polypropylene Blue -40 to +140 40 24 10 7622-0432 Polybutylene Teraphthalate Red -45 to +180 40 24 10 7622-2132 Polybutylene Teraphthalate Red -45 to +180 40 24 1 7622-12145 Polypropylene Blue -40 to +140 54 26 10 7622-0645 Polypropylene Yellow -40 to +140 54 26 10 7622-3245 Polypropylene Green -40 to +140 54 26 10 7622-3545 Polypropylene Grey -40 to +140 54 26 10 7622-3745 Polybutylene Teraphthalate Red -45 to +180 54 26 10 7622-2445 Polybutylene Teraphthalate Red -45 to +180 54 26 1 7622-12480 Polypropylene Blue -40 to +140 86 40 10 7622-38

POURING RINGSFor Thread

Size Material ColorTemperature

Range, °CHeight,

mmCaseQty.

OrderCode

32 Polypropylene Blue -40 to +140 4 10 7622-5245 Polypropylene Blue -40 to +140 4 10 7622-5432 Polybutylene Teraphthalate Red -45 to +180 4 10 7622-5645 Polybutylene Teraphthalate Red -45 to +180 4 10 7622-5845 Polypropylene Green -40 to +140 4 10 7622-6045 Polypropylene Yellow -40 to +140 4 10 7622-6245 Polypropylene Grey -40 to +140 4 10 7622-6480 Polypropylene Blue -40 to +140 7 10 7622-65

Color-Coded Capsand Pour Rings

6

7627 CAP & POUR RING Premium, for GL Threaded Bottles This premium cap is designed for GL45 thread Duran® bottles. It is made of colorless, TPCh260 resin so that there are no leachables. High Chemical resistance and leak tight due to a PTFE coated silicone seal. Meets USP standards. Autoclavable. Retrace code.

DescriptionTemperature.

Range, °CO.D.,mm

Height,mm

CaseQty.

OrderCode

Cap –196 to +260 51 26 5 7627-02Pour Ring –196 to +260 51 4 5 7627-03

7628 CAP & POUR RING for GL80 Threaded Bottles, Quick Release, PSU Quick-release closure for new GL80 thread, wide-mouth bottles. Made of white polyarylsulphone 1 resin, which gives high thermal, mechanical and chemical compatibility. Inner-seal is coated both sides with PTFE. Pour ring also available in PSU.

DescriptionMaximumTemp., °C

O.D.,mm

Height,mm

CaseQty.

OrderCode

Cap +180 86 40 5 7628-03Pour Ring +180 86 6.85 5 7628-04

7629 CAP PTFE Membrane, for GL Threaded Bottles Polypropylene, blue cap with center-hole and welded-in, PTFE, inner gas permeable membrane. Ideal for media sterilization and storage. For use on 5539, 5557, 5559 and 5560 bottles.

For ThreadSize

Temperature.Range, °C

O.D.,mm

Height,mm

CaseQty.

OrderCode

25 –40 to +140 33 19 5 7629-2532 –40 to +140 41 24 5 7629-3245 –40 to +140 54 25 5 7629-4580 –40 to +140 86 40 2 7629-80

7621 CAP With Hole, GL Thread Open top red polybutylene teraphthalate (PBT) cap for use with 7620 GL threads. When used with 7623 hose connection and 7624 sealing ring, will accommodate tubing of approximate diameter.

For ThreadSize

Temperature.Range, °C

Aperature Size, mm

O.D.,mm

Height,mm Qty.

OrderCode

25 –45 to +180 15 33 19 1 7621-1532 –45 to +180 20 40 24 1 7621-2245 –45 to +180 34 54 26 1 7621-25

7

7631 CAP GL80 Connection System The heart of the GL80 connection system is a GL80 polypropylene cap with 4, GL18 threaded ports. Modular accessories include polypropylene tube connection caps, GL18 solid polybutylene terepthalate (PBT) caps, GL18 PBT pressure equalization caps and PTFE cap inserts to accomodate various sizes of tubing. A typical application is the safe transfer of liquid media within a closed and sterile system for which you’d need one two-pack code -01 GL80 cap,two -04 equalization caps, and some combination of solid caps and tubing connections with inserts.

DescriptionPackage

Qty. Order Code4-Port (GL18) Polypropylene Cap 2 7631-01GL18 Polypropylene Tube Connection 2 7631-02Solid GL18 PBT Cap 2 7631-03GL18 PBT Cap wtih Pressure Equalizing Valve 1 7631-043.2mm I.D. PTFE Cap Insert 1 7631-106.0mm I.D. PTFE Cap Insert 1 7631-118.0mm I.D. PTFE Cap Insert 1 7631-1210.0mm I.D. PTFE Cap Insert 1 7631-1312.0mm I.D. PTFE Cap Insert 1 7631-14

7632 CAP GL45 Connection System The heart of the GL45 connection system is a GL45 polypropylene cap with GL18 threaded ports. Modular accessories include polypropylene tube connection caps, GL18 solid polybutylene terepthalate (PBT) caps, GL18 PBT pressure equalization caps and PTFE cap inserts to accomodate various sizes of tubing. A typical application is the safe transfer of liquid media within a closed and sterile system for which you’d need one two-pack GL45 cap, two -07 equalization caps, and some combination of solid caps and tubing connections with inserts.

DescriptionPackage

Qty. Order Code2-Port (GL14) Polypropylene Cap 2 7632-013-Port (GL14) Polypropylene Cap 2 7632-02GL14 Polypropylene Tube Connection 2 7632-05Solid GL18 PBT Cap 2 7632-06GL14 PBT Cap wtih Pressure Equalizing Valve 1 7632-07Extra Pressure Membranes for 7632-07 2 7632-081.6mm I.D. PTFE Cap Insert 1 7632-103.0mm I.D. PTFE Cap Insert 1 7632-113.2mm I.D. PTFE Cap Insert 1 7632-126.6mm I.D. PTFE Cap Insert 1 7632-13

7625 SEPTA For GL Caps, Silicone & Silicone/PTFE These septa fit our 7621 open top cap Duran® product family. Available in both silicone and PTFE-faced silicone for good chemical reistance. Can withstand 130°C vapor or 200°C dry heat.

For ThreadSize Style

PackageQty.

OrderCode

25 Silicone 10 7625-0332 Silicone 10 7625-0445 Silicone 10 7625-0525 Silicone/PTFE 10 7625-0832 Silicone/PTFE 10 7625-0945 Silicone/PTFE 10 7625-10

P.O. Box 688 • Vineland, NJ 08362-0688 • 856-692-3333 • Fax: 856-692-8919

TOLL-FREE: 1-800-223-4524 • FAX: 1-800-543-6752

www.aceglass.com email: sales@aceglass.com