Acclaim Catalog v5 (2014/15)
-
Upload
adj-group-of-companies -
Category
Documents
-
view
260 -
download
6
description
Transcript of Acclaim Catalog v5 (2014/15)
PRODUCTS v5
PR
OD
UC
TS
v5.
2
YOUR SOURCE FOR ADVANCED LED LIGHTING SOLUTIONS
USA ( HQ )6122 S. Eastern AVELos AngelesCA 90040Phone: +1(323) 213-4626Fax : +1(323) 582-3108
EU - THE NETHERLANDSJunostraat 26468 EW Kerkrade,The NetherlandsPhone: +31 45 546 85 60Fax : +31 45 546 85 97
ASIA - HONG KONG J301 Hung to Centre,96 How Ming StreetKwun Tong, Kowloon,Phone: +852 6338 6123Phone: +86 147 1603 4675
SINGAPORENo. 2 Soon Wing Road #06-04Singapore 347893Phone: +65 9680 6878CTC: Denis Beh
ACCLAIM LIGHTING, USA ( HQ )
About us
was founded 2003 in Los Angeles, California and immediately made an impact on the market with an impressive portfolio of innovative and advanced lighting technology, including high performance controller units for entertainment and architectural lighting demands.
ACCLAIM LIGHTING is worldwide established key supplier for prestigious architectural and urban lighting demands as well as for challenging unique appearance of cultural venues, luxury hotels, theme parks, cruise ships, TV-studio sets and clubs.
The experienced and well trained ACCLAIM team covers an integral service offering extensive consulting leading to individual and distinctive lighting solutions. Profound technical knowledge combined with the ability to create reality for the customer’s vision is our expertise.
ACCLAIM LIGHTING – Your project is our challenge to enlighten a dream!
2
ACCLAIM LIGHTING, USA ( HQ )
ACCLAIMLIGHTING
ACCLAIM LIGHTING, EU -The Netherlands
3
Content
www.acclaimlighting.eu** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
• X-Chip 100 & 300• X-Chip W12• X-Chip 6100• X-Chip II• AL Stick 500/1000 RGB• AL Stick 500/1000 (SC)• Rebel Bar HPWOL-DC• X-Stick 12 RGB• X-Stick 36• Rebel Chip• DynaCove Interior SO• DynaCove Interior HO• Flex II HO 24V Interior• Flex II HO 24V RGB Interior• W-Hotel
• W-Hotel• Flex II SO 12V (IP65)• Flex II SO 24V (IP65)• Flex II HO 12V (IP68)• Flex II HO 24V (IP68)• Flex II HO 24V RGB (IP68)• DynaCove Exterior HO• AL Stick IP65 RGB• AL Stick ND IP65• AL Stick IP68 RGB• AL Stick ND IP68• AL Strip Mini RGB (IP65)• AL Strip Mini ND (IP65)
• DynaGraze Interior HO• DynaGraze Interior SO• Rebel Bar HPWL-DC• Rebel Chip• DynaGraze Exterior HO• Rebel Bar 350 (IP65)• Rebel Bar HIP65 AC• Rebel Bar HIP65 AC-H+• Rebel Bar HIP65 DC• Rebel Bar HIP68 DC
• DD-2 Mini / DD WM Pro• DD-6 / Din Rail DMX
• Rebel Chip Driver• X-Power HP Pro• AL Dimmer 1 HP• AL Dimmer 3 HP• AL Dimmer 3 F HP• AL Dimmer 4 HP• AL Driver 8 RGBW 12V• AL Driver 8 RGBW 24V• AL Dimmer 1 Pro• AL Dimmer 1 Multi• X-Dimmer 3 Pro• AL Dimmer 3F• AL Dimmer 4FM
• X-Power TV• X Chip Driver TV• Pixel Driver Mini• AL Pixel 1 Driver• AL Pixel 6 Driver
6-35 36-49
94-97
CoveCoveCoveCoveCove GrazeGrazeGrazeGrazeGrazeGrazeGrazeGrazeGraze
DMX Splitter / BoostersDMX Splitter / BoostersDMX Splitter / BoostersDMX Splitter / BoostersDMX Splitter / BoostersDMX Splitter / BoostersDMX Splitter / BoostersDMX Splitter / Boosters DriversDriversDriversDriversDriversDriversDriversDriversDriversDriversDriversDrivers
98-117
4
www.acclaimlighting.eu** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ContentACCLAIM
LIGHTING
• Rebel Eye HP• Color Ray MR• Community Church• Community Church• Rebel Drum Serie CC• Rebel Drum Serie SC-CV• Rebel Drum 36 CC• Rebel Drum 30 SC-CV• Inground Lite CC, IP67• Inground Lite SC-CV 24V• Inground Lite SC-CV 240V• AL Spot IP65• Color Ray DMX
• Color Ray ND• Rebel Band 300 Pro• Rebel Band 300H Pro• DynaFlood SO• DynaFlood HO• DynaFlood Quad• DynaDrum Quad• DynaDrum HO• Rebel Band 600 H+
• AL Puzzle 16• AL Puzzle Image• AL Panel Pro • AL Panel Pro Frame• Pixel Stick• Cat Walk Panel• Pennsylvania• Pennsylvania• AL Pixel 1• AL Pixel 6• AL Dome DMX• AL Bar AC DMX (IP65)• AL Ball MK-I DMX
• AL Ball MK-II DMX• AL Tube Pro• AL Pixel Bar• AL Pixel Tube Pro• Pixel Tube 15/30
• CLG 24V DC PSU / S-150 24V DC PSU
• CLG 12V DC PSU / S-150 12V DC PSU
• X-PD-150 II
• ART SSC• ART IO• ART B6• Emulation Pro• ART 4• ART 9• ART 16• AL Control 1 Pro• AL Fade 6-II• AL KP II• ART 8D• TC 1• AL Net 8 Pro
• XB-R1 Setup tool
118-123
Power SuppliesPower SuppliesPower SuppliesPower SuppliesPower SuppliesPower SuppliesPower SuppliesPower Supplies DMX ControllersDMX ControllersDMX ControllersDMX ControllersDMX ControllersDMX ControllersDMX ControllersDMX ControllersDMX Controllers
124-139
54-73
FloodFloodFloodFloodFlood Direct ViewDirect ViewDirect ViewDirect ViewDirect View
74-93
5
Cove InteriorCove Cove Cove Cove InteriorInteriorInteriorInterior
Lacoste, Abu Dhabi
6
ACCLAIMLIGHTINGLacoste, Abu Dhabi
7
Control:1 = Not Applicable
X-Chip 100 & 300System
Max. in ChainCabling SystemControl DMX ChannelsLED CurrentLight Source LumenEfficiency (lm/W)CRIPower ConsumptionWeight
HousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC / 5-Wire
50 pcs5 pin Flat Cable (2 wires 24V + 3 wires signal)X-Power TV or X-Chip Driver TV X-Chip Driver IRControled by 3 DMX Channels50mAX-Chip-100 = 5 x SMD 5050 X-Chip-300 = 6 x SMD 505018.9 @ RGB9.9 @ RGBImmeasurableX-Chip-100 = 1,2W / X-Chip-300 =1,5WX-Chip-100 = 11 gr (0.4 oz) X-Chip-300 = 30 gr (1.1 oz)PCBIndoor, Dry Location50.000 hrs. under normal operation conditions0 °C ~ +40 °C (32 °F ~ +104 °F)CEMounting clips and one 10 cm Link Cable
- x x x - x x x xVersion:N = Normal
Color:CGHNPQR
= WW 3200k= CW 6000k= RGB= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 5 LEDs SMD 100 mmB = 6 LEDs SMD 300 mm
Cover:4 = No Cover
Housing:3 = Gray Color
XCA
Model NumberXCA-134-AAHNXCA-134-BAHN
Product NameX-Chip 100 SMD RGB 5-LED‘sX-Chip 300 SMD RGB 6-LED‘s
Length100 mm300 mm
Beam120º120º
ColorRGB RGB
Delivery includingMounting clips and one 10 cm Link CableMounting clips and one 10 cm Link Cable
100mm [3.9 ] 300mm [11. ]
2mm [3.2 ]
i 300i 100
16m
m [
0.6
]
16mm [0.6 ]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
8
Control:1 = Not Applicable
X-Chip W12System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (2-wire)
150 pcs2-wire DC cable24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or AL Dimmer 1 ProControled by 1 DMX Channel-24V DC 35mA4 x SMD 5050 36.3 @ CW, 37.2 @ WW45.4 @ CW, 46.5 @ WW83 @ WW1W11 gr (0.4 oz) PCBIndoor, Dry Location50.000 hrs. under normal operation conditions 0 °C ~ +40 °C (32 °F ~ +104 °F)CEMounting clips and one 10 cm Link Cable
- x x x - x x x xVersion:N = Normal
Color:CEGNPQR
= WW 3200k= NW 4000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 4 LEDs SMD 100 mm
Cover:4 = No CoverHousing:
3 = Gray Color
XCB
Model NumberXCB-134-AAGNXCB-134-AACN
Product NameX-Chip W12 4 x SMD LED CWX-Chip W12 4 x SMD LED WW
Length100 mm100 mm
Beam120º120º
ColorWhite 6000k White 3200k
Delivery includingMounting clips and one 10 cm Link CableMounting clips and one 10 cm Link Cable
2mm [3.2 in]100mm [3.9 in]
16m
m [
0.6
in]
16mm [0.6 in]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
9
Control:1 = Not Applicable
X-Chip 6100System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (4-wire)
40 pcs4-wire DC cable24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or X-Dimmer 3 ProControled by 3 DMX Channels-24V DC 50mA15 x SMD 3528 30 @ RGB25 @ RGB1,2W100 x 16 x 16mm (3.9 x 0.6x 0.6 in)15 gr (0.53 oz)PCBIndoor, Dry Location50.000 hrs. under normal operation conditions0 °C ~ +40 °C (32 °F ~ +104 °F)CEMounting clips and one 10 cm Link Cable
- x x x - x x x xVersion: N = Normal
Color: ABCDEFG
= CW-B-CW= WW-A-B= CW-WW-CW = WW-CW-WW = WW-A-WW = CW-A-CW = CW-A-WW
Beam Angle: A
= Open Beam
LED Config: A = 15 LEDs SMD 100 mm
Cover: 4 = No Cover
Housing: 3 = Gray Color
XCC
Model NumberXCC-134-AADNXCC-134-AACNXCC-134-AAEN
Product NameX-Chip 6100 WW-CW-WW SMD-3528X-Chip 6100 CW-WW-CW SMD-3528X-Chip 6100 WW-A-WW SMD-3528
Length100 mm100 mm100 mm
Beam120º120º120º
Color2 x 3200K & 1 x 6000k 1 x 3200K & 2 x 6000k2 x 3200K & 1 x Amber
Delivery includingMounting clips and one 10 cm Link CableMounting clips and one 10 cm Link CableMounting clips and one 10 cm Link Cable
2mm [3.2 in] 16m
m [
0.6
in]
16m
m [
0.6
in]100mm [3.9 in]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
10
Control:4 = Master DMX5 = Slave
X-Chip llSystem
Max. in Chain Cabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
1 pc Masters with 20 pcs Slaveor 32 pcs Masters 2-wire DC Power-cable + 1 DMX CableDirect DMX-512, Manual, Stand AloneControled by 3 DMX ChannelsXB-R1 Setup Tool24V DC 70mA Master / 50mA Slave 6 x SMD 5050 15.1 @ RGB12.6 @ RGBImmeasurable1,7W Master / 1,2W Slave 30 gr (1.6 oz) Master / 10,8 gr (0.38 oz) SlavePCBIndoor, Dry Location50.000 hrs. under normal operation conditions 0 °C ~ +40 °C (32 °F ~ +104 °F)CEMounting clips and 1 x 10 cm Link Cable
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 6 SMD LEDs
Cover:4 = No Cover
Housing:3 = Gray Color
XCD
Model NumberXCD-434-AAHNXCD-534-AAHN
Product NameX-Chip ll -125 Master X-Chip ll -125 Slave
Length12,5 cm12,5 cm
Beam120º120º
ColorRGBRGB
Delivery includingMounting clips and 1 x 10 cm Link Cable Mounting clips and 1 x 10 cm Link Cable
12 mm [4.9 in] 22mm [0.9 in]
26m
m [
1.0
in]
2mm [3.2 in]
23m
m [
0.9
in]
Master
Master
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
11
Control:2 = DMX
AL Stick 500/1000 RGBSystem
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
15 m ( 49 ft )2-wire DC Power-cable + 1 DMX CableDirect DMX-512, Manual, Stand AloneControled by 3 DMX ChannelsDipswitch (backside AL-Stick)24V DC 200mA / 380mA 24 / 48 x SMD 5050 76 @ RGB16.9 @ RGBImmeasurable5W / 10W 300 gr (10.6 oz) / 480 gr (16.9 oz)Aluminum extrusionIP20, Dry Location50.000 hrs. under normal operation conditions0 °C ~ +40 °C (32 °F ~ +104 °F)CEFirst and Link cable
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 24 LEDs SMD (500 mm)B = 48 LEDs SMD (1000 mm)Cover:
1 = ClearHousing:4 = Aluminum
ASA
Model NumberASA-241-AAHNASA-241-BAHN
Product NameAL Stick 500 SMD RGB AL Stick 1000 SMD RGB
Length500 mm
1000 mm
Beam120º120º
ColorRGBRGB
Delivery includingFirst and Link cableFirst and Link cable
1009mm [39.7 in]
44mm [1.7 in]
42m
m [
1.7
in]
44m
m [
1.7
in]
1027mm [40.4 in]
1004mm [39. in]
09mm [20.0 in]27mm [20.7 in]
04mm [19. in]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
12
Control:1 = Not Applicable
AL Stick 500/1000 (SC)System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (2-wire)
15 m ( 49 ft )2-wire DC cable24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or AL Dimmer 1 ProControled by 1 DMX Channel-24V DC 200mA / 400mA24 / 48 x SMD 5050 270 @ WW, 344.4 @ CW36 @ WW, 44.2 @ CW85 @ WW, 70 @ CW5W / 10W 300 gr (10.6 oz) / 480 gr (16.9 oz)Aluminum extrusionIP20, Dry Location50.000 hrs. under normal operation conditions 0 °C ~ +40 °C (32 °F ~ +104 °F)CEFirst and Link cable
- x x x - x x x xVersion:N = Normal
Color:CEGNPQR
= WW 3200k = NW 4000k = CW 6000k= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 24 LEDs SMD (500 mm)B = 48 LEDs SMD (1000 mm)
Cover:1 = Clear
Housing:4 = Aluminum
ASB
Model NumberASB-141-AAGNASB-141-AACN
Product NameAL Stick 500 CW AL Stick 500 WW
Length500 mm500 mm
Beam120º120º
ColorWhite 6000k White 3200k
Delivery includingFirst and Link cableFirst and Link cable
1009mm [39.7 in]
44mm [1.7 in]
42m
m [
1.7
in]
44m
m [
1.7
in]
1027mm [40.4 in]
1004mm [39. in]
09mm [20.0 in]27mm [20.7 in]
04mm [19. in]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
13
Control:1 = Not Applicable
Rebel Bar HPWOL-DCSystem
Max. in ChainCabling System ControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceTotal LumensEfficiency (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.CertificationsProtection Rating Including
Constant Current (6 and 12-Wire)
1 pc6-wire DC (1 x 6 pin terminal) Bar = 18 LEDs12-wire DC (2 x 6 pin terminal) Bar = 36 LEDsX-Power HP Pro 24V/350mAControled by 3 DMX Channels--350mA18 x and 36 x Rebel LED (3W)1075 @ RGB, 1591 @ WW, 2448 @ CW26.7 @ RGB, 38.7 @ WW, 57.9 @ CW83 @ WW22,5W and 45W1,2 kg (2.6 lbs) and 2,4 kg (5.2 lbs)Aluminum extrusion with matted finishing50.000 hours at 70% lumen maintenance-20 °C ~ +40 °C (-4 °F ~ +104 °F)CEIP20, Dry Location5 m cable and terminal connector(s).
- x x x - x x x xVersion:N = Normal
Color:AEGHMNPQRS
= WW 2700k= NW 4000k= CW 6000k= RGB= WW-CW-WW= Red= Green= Blue= Amber= Special
Beam Angle:A = Open Beam
LED Config:A = 18 LEDs 500 mmB = 18 LEDs 600 mmC = 36 LEDs 1000 mm
Cover:1= Clear
Housing:4 = Aluminum Color
RBB
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
1000mm [39.4 in]
7mm
[3.
4 in
]m
m [
2.3
in]00mm [19.7 in]
14
Control:4 = Master DMX5 = Slave
X-Stick 12 RGBSystem
Max. in Chain Cabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingSource LifeProtection Rating Operating Temp.CertificationsIncluding
24VDC + DMX
1 pc Masters with 20 pcs Slaveor 17 pcs Masters 2-wire DC Power-cable + 1 DMX CableDirect DMX-512, Manual, Stand AloneControled by 3 DMX Channels / MasterXB-R1 Setup Tool24V DC 120mA Master / 100mA Slave 12 x SMD 5050 31.1 @ RGB12.4 @ RGBImmeasurable3W Master / 2,4W Slave 200 gr (7.1 oz)Polycarbonate with UV stabilizer50.000 hrs. under normal operation conditions IP20, Dry Location0 °C ~ +40 °C (32 °F ~ +104 °F)CE, cETLusAttached Link Cable
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 12 SMD LEDs
Cover:1 = Clear
Housing:1 = Black Color
XSC
Model NumberXSC-411-AAHNXSC-511-AAHN
Product NameX-Stick 12 SMD RGB MasterX-Stick 12 SMD RGB Slave
Length34,6 cm34,6 cm
Beam120º120º
ColorRGB RGB
Delivery includingShort Link Cable (fixed attached)Short Link Cable (fixed attached)
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
23mm [0.9 in]
3m
m [
1.4
in]
23m
m [
0.9
in]
346mm [13.6 in]
206mm [ .1 in]
i n m n in i
15
Control:1 = Not Applicable
X-Stick 36System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (2-wire)
25 pcs2-wire DC cable24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or AL Dimmer 1 ProControled by 1 DMX Channel-24V DC 100mA36 x SMD 352868.8 @ CW, 67.1 @ WW28.7 @ CW, 28 @ WW83 @ WW2,4W200 gr (7.05 oz)Polycarbonate with UV stabilizerIP20, Dry Location50.000 hrs. under normal operation conditions 0 °C ~ +40 °C (32 °F ~ +104 °F)CEAttached Link Cable
- x x x - x x x xVersion:N = Normal
Color:CEG
= WW 3200k = NW 4000k = CW 6000k
Beam Angle:A = Open Beam
LED Config:A = 36 SMD LEDs
Cover:1 = Clear
Housing:1 = Black Color
XSA
Model NumberXSA-111-AAGNXSA-111-AACN
Product NameX-Stick 36 CW SMD 6000K X-Stick 36 WW SMD 3200K
Length34,6 cm34,6 cm
Beam120º120º
ColorWhite 6000k White 3200k
Delivery includingLink cable (Fixed)Link cable (Fixed)
23mm [0.9 in]
3m
m [
1.4
in]
23m
m [
0.9
in]
346mm [13.6 in]
206mm [ .1 in]
i n m n in i
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
16
Control:1 = Not Applicable
Rebel ChipSystem
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousing Protection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Current (5-Wire)
12 pcs5-wire DC Rebel Chip Driver Controled by 3 DMX Channels--350mA Max3 x Rebel LED (1W)231 @ CW, 166.4 @ WW22.9 @ CW, 19.1 @ WW83 @ WW5W50 gr (1.8 oz)Aluminum extrusion and Polycarbonatewith UV StabilizerIP20, Dry Location50.000 hours at 70% lumen maintenance0 °C ~ +40 °C (32 °F ~ +104 °F)CE30 cm link cable with 5-pin terminal conn.
- x x x - x x x xVersion:N = Normal
Color:ACEGHMNPQR
= WW 2700k = WW 3200k= NW 4000k= CW 6000k= RGB= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:AU
= Open Beam= 20 x 40°LED Config:
A = 3 LEDs Cover:1 = Clear
Housing:4 = Aluminum Color
RCA
120mm [4.7in]
24m
m [
1.0i
n]
22m
m [
0.9i
n]
120mm [4.7in]
24m
m [
1.0i
n]
2m
m [
1.0i
n]
120mm [4.7in]
120mm [4.7in]
Indoor Fixtures
Projects
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
17
DynaCove Interior SOSystem
Max. in ChainCabling SystemControlLED CurrentLight SourceBeam AngleLumen Efficacy (lm/W)CRIPower ConsumptionWeightHousingFinishSource LifeOperating Temp.Protection Rating CertificationsIncluding
90-135VAC or 200-300VAC ELV Dimmable
15m (50 feet) @ 120V / 30m (100 feet) @ 240V+3 Conductor, AC cableELV or Triac480mA7/28 pcs CREE XPE Leds120°590 @ 2700K (1f), 2295 @ 3000K (4f)54 @ 3000K85 @ 3000K12W / 48W0.3kg ( 0.7lbs.)/ 1.2kg(2.6lbs) Aluminum, Frosted Polycarbonate LensAnodized Brushed Aluminum 50.000 hours at 70% lumen maintenance-20 °C ~ +45 °C (-4 °F ~ +113 °F)IP20, Dry LocationCE, cETLusAttached link cable male and female
Control:1 = Not Applicable
- x x x - x x x xVersion:U EColor:
ABDE
= WW 2700k= WW 3000k= NW 3500k= NW 4000k
Beam Angle:A = Open beam
LED Config:A = 7 LEDs (1f) 305mmD = 28 LEDs (4f) 1219mm
Cover:2 = Frosted
Housing:1 = Black Color2 = White Color4 = Aluminum Color
DCD
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
1219.2mm [4 ]
1219.0mm [4 ]1126.7mm [3 .4 ]
1.m
m [
2.0
] 43.7mm [1.7 ]
39.0mm [1. ]
304. mm [1 ]
1.m
m [
2.0
]
304. mm [1 ]212.2mm [ .4 ]
Wiring Diagram
n
n in n n m
100 240
240
240
m . 100 30m i n in in m . n m i n n in imm .
m . 100 30 m i n in in m . n m i n n in imm .
240 240
imm niin i in
imm in i in
= 90-120 VAC = 220-300 VAC
18
DynaCove Interior HOSystem
Dimming Max in ChainCabling SystemPower requirementsLED CurrentBeamCRILight SourcePower ConsumptionTotal LumensEfficiency lm/WWeightHousingCertificationsProtection Rating Source LifeOperating Temp.Including
90-135VAC or 200-300VAC ELV Dimmable
Trailing or leading edge35’@120VAC / 70’ (21,3m) @ 240VAC3 Conductor AC Cable90-135VAC / 200-300VAC500mA120º86 @ 4000K10 / 40 pcs 3W CREE LEDs23W / 92W 853 (1‘) @2700K / 4010 (4‘) @ 4000k 37 @ 2700k / 44 @ 4000k0,8 kg (1.8 lbs) / 3,2 kg (7.1 lbs)Aluminum, Frosted Polycarbonate LensCE, cETLus PendingIP44, Dry Location50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)Attached link cable male and female
- x x x - x x x xDCA
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
Control:1 = Not Applicable
Version:U = 90-135 VACE = 200-300 VACColor:
ABDEFGNPQR
= WW 2700k= WW 3000k= NW 3500k= NW 4000k= NW 5000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 10 LEDs (1f) 305mmD = 40 LEDs (4f) 1219mmCover:
2 = FrostedHousing:1 = Black Color2 = White Color4 = Aluminum Color
ACCLAIMLIGHTING
1219mm [4 .0 in] 30 mm [12.0 in]
72m
m [
2. in
]
14m
m [
0.6
]
2mm
[2.
0 in
]
1192mm [46.9 in] 2 0mm [11.0 in]
Projects
19
Flex ll HO 24V Interior24VDC PWM (2-wire)
1 pc 2-wire DC cableAL Driver 8 RGBW 24V or AL Dimmer 1 Pro24VDC 3A2400, 2700K, 3000K, 4000K, 6000K 120°419 lm/m @ 3000K, 440 lm/m @ 6000K 29 @ 3000K, 30.3 @ 6000K67 @ 3000K, 81 @ 6000K 14,4W / m Located Every 4” (100mm) 0,5Kg (1lbs)Copper Strip, 3M Adhesive Backing30.000 hours -20 °C ~ +40 °C (-4 °F ~ +104 °F) Dry Location CE, cETL, RoHS5mm Plug With Bare Wire Adaptor3M Tape
Control:1 = Not Applicable
System
Max. in ChainCabling SystemControlPower requirementsCurrent ConsumptionColor TemperatureBeam AngleLumenEfficacy (lm/W)CRIPower Consumption Cut & Solder JointsWeightHousingSource LifeOperating Temp.Protection RatingCertificationsFixture connectorsIncluding
- x x x - x x x xVersion: N = Normal
Color: ABEGV
= 2700k= 3000k= 4000k= 6000k= 2400K
Beam Angle: A = Open Beam
LED Config: A = 300 LEDs @ 5 m
Cover: 1 = Clear Flex PCB Color
8 = Copper
FLG
Indoor Fixtures
www.acclaimlighting.eu
Model Number
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
Dimensions
11mm [0.4in]
mm [0.2in]
13mm [0. in]100mm [3.9in]
17mm [0.7in]
20
Control:1 = Not Applicable
Flex ll HO 24V RGB InteriorSystem
Max. in ChainCabling SystemControlDMX ChannelsPower requirementsCurrent ConsumptionLight Source Color Beam AnglePower ConsumptionDimensionsCut & Solder JointsWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
24DC PWM (4-wire)
1 pc4-wire DC cableAL Driver 8 RGBW 24V or X-Dimmer 3 ProControled by 3 DMX Channel24V DC 3A300 x SMD RGB120°14,4W / m5m x 11.1 x 4.7mm (16.4 ft x 0.43 x 0.18 in)Located Every 4” (100mm)0.5 Kg (1 lbs)Copper Strip, 3M Adhesive Backing30.000 hours -20 °C ~ +40 °C (-4 °F ~ +104 °F)Dry locationCE, cETLus3M Tape
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 300 LEDs 5 m
Cover:1 = No Cover
Flex PCB Color:1 = Copper
FLH
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
11mm [0.4in]
mm [0.2in]
13mm [0. in]100mm [3.9in]
17mm [0.7in]
21
Cove ExteriorCove Cove Cove Cove ExteriorExteriorExteriorExterior
W-Hotel, Arizona, USA
22
ACCLAIMLIGHTINGW-Hotel, Arizona, USA
23
Flex ll SO 12V (IP65)12VDC PWM (2-wire)
1 pcs2-wire DC cableAL Driver 8 RGBW 12V or AL Dimmer 1 Pro12VDC 4A2700K, 3000K, 4000K, 6000K120°256 lm/m @ 3000k, 319 lm/m @ 6000k 26.6 @ 3000K, 33.2 @ 6000K67 @ 3000K, 76 @ 6000K9,6W / mtr Located Every 1,2” (30mm)0,5 Kg (1 lbs)UV Coated, Flexible Silicone Jacket30.000 hours -20 °C ~ +40 °C (-4 °F ~ +104 °F)IP65, Wet LocationCE, cETL, RoHS5mm Plug With Bare Wire Adaptor3M Tape
Control:1 = Not Applicable
System
Max in ChainCabling SystemControlPower requirementsCurrent ConsumptionColor TemperatureBeam AngleLumen Efficacy (lm/W)CRIPower ConsumptionCut & Solder JointsWeightHousingSource LifeOperating Temp.Protection Rating CertificationsFixture connectorsIncluding
- x x x - x x x xVersion:N = Normal
Color:ABEG
= 2700k= 3000k= 4000k= 6000k
Beam Angle:A = Open Beam
LED Config:A = 600 LEDs @ 5 m
Cover:1 = Clear Flex PCB Color
8 = Copper
FLD
Outdoor Fixtures
13mm [0. ] 10mm [0.4 ]
mm [0.2 ] 3mm [0.1 ]
10mm [0.4 ] 10mm [0.4 ]
mm [0.2 ]
10mm [0.4 ]
13mm [0. ]
9mm [0.4 ]
30mm [1.2 ]
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
24
Flex ll SO 24V (IP65)24VDC PWM (2-wire)
1 pcs2-wire DC cableAL Driver 8 RGBW 24V or AL Dimmer 1 Pro24VDC 2A2700K, 3000K, 4000K, 6000K120°256 lm/m @ 3000k, 319 lm/m @ 6000k 26.6 @ 3000K, 33.2 @ 6000K67 @ 3000K, 76 @ 6000K9,6W / mtr Located Every 2.4” (60mm)0,5 Kg (1 lbs)UV Coated, Flexible Silicone Jacket30.000 hours -20 °C ~ +40 °C (-4 °F ~ +104 °F)IP65, Wet LocationCE, cETL, RoHS5mm Plug With Bare Wire Adaptor3M Tape
Control:1 = Not Applicable
System
Max in ChainCabling SystemControlPower requirementsCurrent ConsumptionColor TemperatureBeam AngleLumen Efficacy (lm/W)CRIPower ConsumptionCut & Solder JointsWeightHousingSource LifeOperating Temp.Protection Rating CertificationsFixture connectorsIncluding
- x x x - x x x xVersion:N = Normal
Color:ABEG
= 2700k= 3000k= 4000k= 6000k
Beam Angle:A = Open Beam
LED Config:A = 600 LEDs @ 5 m
Cover:1 = Clear Flex PCB Color
8 = Copper
FLF
Outdoor Fixtures
13mm [0. in] 10mm [0.4in]
mm [0.2in] 3mm [0.1in]
10mm [0.4in] 10mm [0.4in]
mm [0.2in]
10mm [0.4in]
13mm [0. in]
9mm [0.4in]
60mm [2.4in]
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
25
Flex ll HO 12V (IP68)12VDC PWM (2-wire)
1 pc2-wire DC cableAL Driver 8 RGBW 12V or AL Dimmer 1 Pro12VDC 6A2400k, 2700K, 3000K, 4000K, 6000K120°419 lm/m @ 3000K, 440 lm/m @ 6000K29 @ 3000K, 30.3 @ 6000K67 @ 3000K, 81 @ 6000K14,4W / m Located Every 2” (50mm) 0,5Kg (1lbs)UV Coated, Flexible Silicone Jacket 30.000 hours -20 °C ~ +40 °C (-4 °F ~ +104 °F)IP68, Wet Location / Submersible Up To 3’ (1m)CE, cETL, RoHS5mm Plug With Bare Wire AdaptorMounting clips
Control:1 = Not Applicable
System
Max. in ChainCabling SystemControlPower requirementsCurrent ConsumptionColor TemperatureBeam AngleLumenEfficacy (lm/W)CRIPower ConsumptionCut & Solder JointsWeightHousingSource LifeOperating Temp.Protection RatingCertificationsFixture connectorsIncluding
- x x x - x x x xVersion:N = Normal
Beam Angle:A = Open Beam
LED Config:A = 300 LEDs @ 5 m
Cover:1 = Clear Flex PCB Color
8 = Copper
FLC
Outdoor Fixtures
17mm [0.7 ] 1 mm [0.6 ]
6mm [0.2 ] 4mm [0.2 ]
10mm [0.4 ] 10mm [0.4 ]
6mm [0.2 ]
10mm [0.4 ]
17mm [0.7 ]0mm [2.0 ]
17mm [0.7 ]
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
Color:ABEGV
= 2700k= 3000k= 4000k= 6000k= 2400K
26
Flex ll HO 24V (IP68)24VDC PWM (2-wire)
1 pc2-wire DC cableAL Driver 8 RGBW 24V or AL Dimmer 1 Pro24VDC 3A2400, 2700K, 3000K, 4000K, 6000K120°419 lm/m @ 3000K, 440 lm/m @ 6000K29 @ 3000K, 30.3 @ 6000K67 @ 3000K, 81 @ 6000K14,4W / m Located Every 4” (100mm) 0,5Kg (1lbs)UV Coated, Flexible Silicone Jacket 30.000 hours -20 °C ~ +40 °C (-4 °F ~ +104 °F)IP68, Wet Location / Submersible Up To 3’ (1m)CE, cETL, RoHS5mm Plug With Bare Wire AdaptorMounting clips,3M Tape optional
Control:1 = Not Applicable
System
Max. in ChainCabling SystemControlPower requirementsCurrent ConsumptionColor TemperatureBeam AngleLumenEfficacy (lm/W)CRIPower ConsumptionCut & Solder JointsWeightHousingSource LifeOperating Temp.Protection RatingCertificationsFixture connectorsIncluding
- x x x - x x x xVersion:N = NormalS = With 3M Color:
ABEGV
= 2700k= 3000k= 4000k= 6000k= 2400K
Beam Angle:A = Open Beam
LED Config:A = 300 LEDs @ 5 m
Cover:1 = Clear Flex PCB Color
8 = Copper
FLE
Outdoor Fixtures
17mm [0.7in] 1 mm [0.6in]
6mm [0.2in] 4mm [0.2in]
10mm [0.4in] 10mm [0.4in]
6mm [0.2in]
10mm [0.4in]
17mm [0.7in]100mm [3.9in]
17mm [0.7in]
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
27
Control:1 = Not Applicable
Flex ll HO 24V RGB (IP68)System
Max. in ChainCabling SystemControlDMX ChannelsPower requirementsCurrent ConsumptionLight Source Color Beam AnglePower ConsumptionDimensionsCut & Solder JointsWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
24DC PWM (4-wire)
1 pc4-wire DC cableAL Driver 8 RGBW 24V or X-Dimmer 3 ProControled by 3 DMX Channel24V DC 3A300 x SMD RGB120°14,4W / m5m x 15 x 4mm (16,4 ft x 0.59 x 0.16 in)Located Every 4” (100mm)0.5 Kg (1 lbs)UV Coated, Flexible Silicone Jacket30.000 hours -20 °C ~ +40 °C (-4 °F ~ +104 °F)IP68, Wet Location / Submersible Up To 3’ (1m)CE, cETLus3M Tape
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 300 LEDs 5 m
Cover:1 = Clear
Flex PCB Color:1 = Copper
FLJ
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
17mm [0.7in] 1 mm [0.6in]
6mm [0.2in] 4mm [0.2in]
10mm [0.4in] 10mm [0.4in]
6mm [0.2in]
10mm [0.4in]
17mm [0.7in]100mm [3.9in]
17mm [0.7in]
28
DynaCove Exterior HO (IP66)System
Dimming Max in ChainCabling SystemPower requirementsLED CurrentBeamCRILight SourcePower ConsumptionTotal LumensEfficiency lm/WWeightHousingCertificationsProtection Rating Source LifeOperating Temp.Including
90-135VAC or 200-300VAC ELV Dimmable
Trailing or leading edge35’@120VAC / 70’ (21,3m) @ 240VAC3 Conductor AC Cable90-135VAC / 200-300VAC500mA120º86 @ 4000K10 / 40 pcs 3W CREE LEDs23W / 92W 853 (1‘) @2700K / 4010 (4‘) @ 4000k 37 @ 2700k / 44 @ 4000k1,4 kg (3 lbs) / 5,4 kg (12 lbs)Aluminum, Frosted Polycarbonate LensCE, cETLus PendingIP66, Wet Location50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)Integral, 3 Pin Male & Female Connector
Control:1 = Not Applicable
- x x x - x x x xVersion:U = 90-135 VACE = 200-300 VAC Color:
ABDEFGNPQR
= WW 2700k= WW 3000k= NW 3500k= NW 4000k= NW 5000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 10 LEDs (1f) 305mmD = 40 LEDs (4f) 1219mm
Cover:2 = Frosted
Housing:1 = Black Color2 = White Color4 = Aluminum Color
DCB
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
1219mm [4 .0 in] 30 mm [12.0 in]
73m
m [
2.9
in]
129m
m [
.1 in
]
91m
m [
3.6
in]
Projects
29
Control:2 = DMX
AL Stick IP65 500/1000 RGBSystem
Max. in ChainCabling SystemControlDMX Channels (L=500 mm)DMX Channels (L=1000 mm)Addressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
8 m (26,2 ft)5-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand AloneMin. 3 DMX Chan. Max 12 DMX Chan. (4-pixels)Min. 3 DMX Chan. Max 24 DMX Chan. (8-pixels)XB-R1 Setup Tool24V DC 230mA / 430mA 24 / 48 x SMD 5050 126.4 @ RGB14.7 @ RGBImmeasurable5,5W / 10,5W 300 gr (10.6 oz) / 480 gr (16.9 oz)Aluminum extrusionIP65, Wet Location50.000 hrs. under normal operation conditions -20 °C ~ +40 °C (-4 °F ~ +104 °F)CEAttached Input cable with 5-pin WP male conn.Attached Output cable with 5-pin WP female conn.
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A= Open BeamLED Config:
A = 24 LEDs SMD (500 mm)B = 48 LEDs SMD (1000 mm)
Cover:1 = Clear
Housing:4 = Aluminum
ASF
Model NumberASF-241-AAHNASF-241-BAHN
Product NameAL Stick IP65 500 RGB AL Stick IP65 1000 RGB
Length500 mm
1000 mm
Beam120º120º
ColorRGBRGB
Delivery includingFixed input and output CableFixed input and output Cable
4mm
[2.
1 in
]1000mm [39.4 in]
46mm [1. in]
00mm [19.7 in] 2 mm [1.1 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
30
24
m .1 m 0 i n in in
in i n 2 m 6. 6
i n in in
i 6
24 in
Control:1 = Not Applicable
AL Stick ND IP65 500/1000 (SC)System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (2-wire)
15 M (49,2 ft)2-wire DC cable24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or AL Dimmer 1 ProControled by 1 DMX Channel-24V DC 200mA / 400mA24 / 48 x SMD 5050 270 @ WW, 344.4 @ CW36 @ WW, 44.2 @ CW85 @ WW, 70 @ CW5W / 10W 300 gr (10.6 oz) / 600 gr (21.2 oz)Aluminum extrusionIP65, Wet Location50.000 hrs. under normal operation conditions -20 °C ~ +40 °C (-4 °F ~ +104 °F)CEAttached Input & output cable with 5-pin WP conn.
- x x x - x x x xVersion:N = Normal
Color:CEGNPQR
= WW 3200k= NW 4000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 24 LEDs SMD (500 mm)B = 48 LEDs SMD (1000 mm)Cover:
1 = ClearHousing:4 = Aluminum
ASD
Model NumberASD-141-AACNASD-141-BACNASD-141-AAGNASD-141-BAGN
Product NameAL Stick ND IP65 500 WWAL Stick ND IP65 1000 WWAL Stick ND IP65 500 CWAL Stick ND IP65 1000 CW
Length500 mm
1000 mm500 mm
1000 mm
Beam120º120º120º120º
ColorWhite 3200k White 3200kWhite 6000k White 6000k
Delivery includingFixed input and output CableFixed input and output CableFixed input and output CableFixed input and output Cable
4mm
[2.
1 in
]1000mm [39.4 in]
46mm [1. in]
00mm [19.7 in] 2 mm [1.1 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Wiring Diagram
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
31
Control:1 = Not Applicable
AL Stick ND IP68 500/1000 (SC)System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (2-wire)
1 pc2-wire DC cable + ground 24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or AL Dimmer 1 ProControled by 1 DMX Channel-24V DC 200mA / 400mA24 / 48 x SMD 5050 270 @ WW, 344.4 @ CW36 @ WW, 44.2 @ CW85 @ WW, 70 @ CW5W / 10W 300 gr (10.6 oz) / 600 gr (21.2 oz)Aluminum extrusion in special anodize procesIP68, Wet Location50.000 hrs. under normal operation conditions -20 °C ~ +40 °C (-4 °F ~ +104 °F)CE18 m cable with terminal connector
- x x x - x x x xVersion:N = Normal
Color:CEGNPQR
= WW 3200k= NW 4000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 24 LEDs SMD (500 mm)B = 48 LEDs SMD (1000 mm)Cover:
1 = ClearHousing:4 = Aluminum
ASE
Model NumberASE-141-BACNASE-141-BAGN
Product NameAL Stick ND IP68 1000 WW AL Stick ND IP68 1000 CW
Length1000 mm1000 mm
Beam120º120º
ColorWhite 3200k White 6000k
Delivery including18 m cable with terminal connector18 m cable with terminal connector
4mm
[2.
1 in
]1000mm [39.4 in]
46mm [1. in]
00mm [19.7 in] 2 mm [1.1 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
24
n 12 n
100 240
3 n 1 m 60
i 6
24 24
Wiring Diagram
32
Control:2 = DMX
AL Stick IP68 500/1000 RGB System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
1 pc2-wire DC Power-cable + 1 DMX CableDirect DMX-512, Manual, Stand AloneControled by 3 DMX ChannelsXB-R1 Setup Tool24V DC 230mA / 430mA 24 / 48 x SMD 5050 126.4 @ RGB14.7 @ RGBImmeasurable5,5W / 10,5W 300 gr (10.6 oz) / 480 gr (16.9 oz)Aluminum extrusion in special anodize procesIP68, Wet Location50.000 hrs. under normal operation conditions -20 °C ~ +40 °C (-4 °F ~ +104 °F)CE18 m cable with terminal connector(s)
- x x x - x x x xVersion: N = Normal
Color: H
= RGB
Beam Angle: A
= Open Beam
LED Config: A = 24 LEDs SMD (500 mm)B = 48 LEDs SMD (1000 mm)Cover:
1 = ClearHousing: 4 = Aluminum
ASH
Model NumberASH-241-AAHNASH-241-BAHN
Product NameAL Stick IP68 500 RGB DMXAL Stick IP68 1000 RGB DMX
Length500 mm
1000 mm
Beam120º120º
ColorRGBRGB
Delivery including18 m cable with terminal connectors18 m cable with terminal connectors
4mm
[2.
1 in
]1000mm [39.4 in]
46mm [1. in]
00mm [19.7 in] 2 mm [1.1 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
24
n 1 m 60
i 6
24 in
12 in
Wiring Diagram
33
Control:1 = Not Applicable
AL Strip Mini RGB (IP65)System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (4-wire)
6 pcs4-wire DC cable24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or X-Dimmer 3 ProControled by 3 DMX Channels-24V DC 200mA24 x SMD 5050 77.4 @ RGB18 @ RGBImmeasurable4,8W90 gr (3.17 oz)Aluminum extrusion in anodize processIP65, Wet Location50.000 hours under normal operating conditions-20 °C ~ +40 °C (-4 °F ~ +104 °F)CEAttached in and Output cable (Bare end)2 pcs Mounting clips
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 24 LEDs 500 mm
Cover:1 = Clear
Housing:4 = Aluminum Color
ASJ
Model NumberASJ-141-AAHN
Product NameAL Strip Mini RGB 500 IP65
Length500 mm
Beam120º
ColorRGB
Delivery including2 pcs Mounting clips
00mm [19.7 in]
463mm [1 .2 in]
7mm [0.3 in]
13m
m [
0. in
]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
109764321
12 24
n
12 24
6
3
n
6 m .
m .6 i ini in in
i ini
4 n 2 0mm 0. 2
4 n 2 0mm 0. 2
n i n
imm 3
24
Wiring Diagram
34
Control:1 = Not Applicable
AL Strip Mini ND (IP65)System
Max. in ChainCabling SystemControl DMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC PWM (2-wire)
6 pcs2-wire DC cable24V DC Power or Any 24V DC PWM DimmerAL Driver 8 RGBW 24V or AL Dimmer 1 ProControled by 1 DMX Channel-24V DC 90mA30 x SMD 3528 27.4 @ WW11 @ WW80 @ WW2,16W 90 gr (3.17 oz)Aluminum extrusion in anodize processIP65, Wet Location50.000 hrs. under normal operation conditions -20 °C ~ +40 °C (-4 °F ~ +104 °F)CEAttached in and Output cable with 2-pin plugs, 2 pcs Mounting clips
- x x x - x x x xVersion:N = Normal
Color:CEDKLMN
= WW 3200k = NW 4000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:A = Open Beam
LED Config:A = 30 LEDs 500 mm
Cover:1 = Clear
Housing:4 = Aluminum Color
ASK
Model NumberASK-141-AADNASK-141-AACN
Product NameAL Strip Mini ND CW 500 IP65 AL Strip Mini ND WW 500 IP65
Length500 mm500 mm
Beam120º120º
ColorCool White 6000kWarm White 3200k
Delivery including2 pcs Mounting clips 2 pcs Mounting clips
00mm [19.7 in]
463mm [1 .2 in]
7mm [0.3 in]13
mm
[0.
in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
35
Graze InteriorGraze Graze Graze Graze InteriorInteriorInteriorInterior
Oasis of the Sea, Maimi, World‘s largest cruise ship
36
ACCLAIMLIGHTING
ACCLAIMLIGHTINGOasis of the Sea, Maimi, World‘s largest cruise ship
37
DynaGraze Interior HOSystem
Dimming Max in ChainCabling SystemPower requirementsLED CurrentBeamCRILight SourcePower ConsumptionTotal LumensEfficiency lm/WWeightHousingCertificationsProtection Rating Source LifeOperating Temp.Including
90-135VAC or 200-300VAC ELV Dimmable
Trailing or leading edge35’@120VAC / 70’ (21,3m) @ 240VAC3 Conductor AC Cable90-135VAC / 200-300VAC500mA10º, 30º, 40º, 10º x 60º, 30º x 60º87 @ 4000K10 / 40 pcs 3W CREE LEDs23W / 92W 834 (1‘) @2700K / 4570 (4‘) @ 4000k 36 @ 2700k / 51 @ 4000k0,8 kg (1.8 lbs) / 3,2 kg (7.1 lbs)Aluminum, Frosted Polycarbonate LensCE, cETLus PendingIP44, Dry Location50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)Attached link cable male and female
Control:1 = Not Applicable
Version:U = 90-135 VACE = 200-300 VACColor:
ABDEFGNPQR
= WW 2700k= WW 3000k= NW 3500k= NW 4000k= NW 5000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:CGHPQ
= 10°= 30°= 40°= 10 x 60°= 30 x 60°
LED Config:A = 10 LEDs (1f) 305mmD = 40 LEDs (4f) 1219mmCover:
1 = ClearHousing:1 = Black Color2 = White Color4 = Aluminum Color
- x x x - x x x xDGA
Indoor Fixtures
www.acclaimlighting.eu
Model Number
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
1219mm [4 .0 in] 30 mm [12.0 in]
1192mm [46.9 in] 2 0mm [11.0 in]
2mm
[2.
0 in
]
0mm
[3.
1 in
]
14m
m [
0.6
in]
3 in in n i n i
i n
nn i
240 imm
m . 21.3m 70 i n in in
3 in i n i n i
3m 10
Wiring Diagram
38
DynaGraze Interior SOSystem
Max. in ChainCabling SystemControlLED CurrentLight SourceBeam AngleLumen Efficacy (lm/W)CRIPower ConsumptionWeightHousingFinishSource LifeOperating Temp.Protection Rating CertificationsIncluding
90-135VAC or 200-300VACELV Dimmable
15m (50 feet) @ 120V / 30m (100 feet) @ 240V+3 Conductor, AC cableELV or Triac480mA7/28 pcs CREE XPE Leds15º, 40º, 15º x 60º, 30º x 60º, 60 (Via LSF only)572 @ 3000K (1f)48 @ 3000K85 @ 3000K12W / 48W0.3kg ( 0.7lbs.)/ 1.2kg(2.6lbs) Aluminum, Polycarbonate LensAnodized Brushed Aluminum 50.000 hours at 70% lumen maintenance-20 °C ~ +45 °C (-4 °F ~ +113 °F)IP20, Dry LocationCE, cETLusAttached link cable male and female
Control:1 = Not Applicable
- x x x - x x x xVersion:U EColor:
ABDE
= WW 2700k= WW 3000k= NW 3500k= NW 4000k
Beam Angle:A = Open beam
LED Config:A = 7 LEDs (1f) 305mmD = 28 LEDs (4f) 1219mm
Cover:1 = Clear
Housing:1 = Black Color2 = White Color4 = Aluminum Color
DGD
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
1219.2mm [4 ]
1219.0mm [4 ]1126.7mm [3 .4 ]
1.m
m [
2.0
] 43.7mm [1.7 ]
39.0mm [1. ]
304. mm [1 ]
1.m
m [
2.0
]
304. mm [1 ]212.2mm [ .4 ]
Wiring Diagram
n
n in n n m
100 240
240
240
m . 100 30m i n in in m . n m i n n in imm .
m . 100 30 m i n in in m . n m i n n in imm .
240 240
imm niin i in
imm in i in
= 90-120 VAC = 220-300 VAC
39
Control:1 = Not Applicable
Rebel Bar HPWL-DCSystem
Max. in ChainCabling System ControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceTotal LumensEfficiency (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
Constant Current (6 and 12-Wire)
1 pc6-wire DC (1 x 6 pin terminal) Bar = 18 LEDs12-wire DC (2 x 6 pin terminal) Bar = 36 LEDsX-Power HP Pro 24V/350mAControled by 3 DMX Channels--350mA18 x and 36 x Rebel LED (3W)762 @ RGB, 1625 @ WW, 2471 @ CW20.1 @ RGB, 39,9 @ WW, 65.9 @ CW83 @ WW22,5W and 45W2 kg (4.4 lbs) and 3 kg (6.6 lbs)Aluminum extrusion with matted finishing50.000 hours at 70% lumen maintenance-20 °C ~ +40 °C (-4 °F ~ +104 °F)IP20, Dry LocationCE5 m cable and terminal connector(s).
- x x x - x x x xVersion:N = Normal
Color:AEGHMNPQR
= WW 2700k= NW 4000k= CW 6000k= RGB= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:CFHM
= 10°= 25°= 40°= 10 x 35°
LED Config:A = 18 LEDs 500 mmB = 18 LEDs 600 mmC = 36 LEDs 1000 mm
Cover:1= Clear
Housing:4 = Aluminum Color
RBA
1000mm [39.4 in]
7mm
[3.
4 in
]m
m [
2.3
in]00mm [19.7 in]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
40
Control:1 = Not Applicable
Rebel ChipSystem
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousing Protection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Current (5-Wire)
12 pcs5-wire DC Rebel Chip Driver Controled by 3 DMX Channels--350mA Max3 x Rebel LED (1W)231 @ CW, 166.4 @ WW22.9 @ CW, 19.1 @ WW83 @ WW5W50 gr (1.8 oz)Aluminum extrusion and Polycarbonatewith UV StabilizerIP20, Dry Location50.000 hours at 70% lumen maintenance0 °C ~ +40 °C (32 °F ~ +104 °F)CE30 cm link cable with 5-pin terminal conn.
- x x x - x x x xVersion:N = Normal
Color:ACEGHMNPQR
= WW 2700k = WW 3200k= NW 4000k= CW 6000k= RGB= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:AU
= Open Beam= 20 x 40°LED Config:
A = 3 LEDs Cover:1 = Clear
Housing:4 = Aluminum Color
RCA
120mm [4.7in]
24m
m [
1.0i
n]
22m
m [
0.9i
n]
120mm [4.7in]
24m
m [
1.0i
n]
2m
m [
1.0i
n]
120mm [4.7in]
120mm [4.7in]
Indoor Fixtures
Projects
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
41
Graze InteriorGraze Graze Graze Graze InteriorInteriorInteriorInterior
Community Church, San Marino, USA
42
ACCLAIMLIGHTINGCommunity Church, San Marino, USA
43
DynaGraze Exterior HO (IP66)System
Dimming Max in ChainCabling SystemPower requirementsLED CurrentBeamCRILight SourcePower ConsumptionTotal LumensEfficiency lm/WWeightHousingCertificationsProtection Rating Source LifeOperating Temp.Including
90-135VAC or 200-300VAC ELV Dimmable
Trailing or leading edge35’@120VAC / 70’ (21,3m) @ 240VAC3 Conductor AC Cable90-135VAC / 200-300VAC500mA10º, 30º, 40º, 10º x 60º, 30º x 60º87 @ 4000K10 / 40 pcs 3W CREE LEDs23W / 92W 834 (1‘) @2700K / 4570 (4‘) @ 4000k 36 @ 2700k / 51 @ 4000k1,4 kg (3 lbs) / 5,4 kg (12 lbs)Aluminum, Frosted Polycarbonate LensCE, cETLus PendingIP66, Wet Location50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)Integral, 3 Pin Male & Female Connector
Control:1 = Not Applicable
Version:U = 90-135 VAC E = 200-300 VAC Color:
ABDEFGNPQR
= WW 2700k= WW 3000k= NW 3500k= NW 4000k= NW 5000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:CGHPQ
= 10°= 30°= 40°= 10 x 60°= 30 x 60°
LED Config:A = 10 LEDs (1f) 305mmD = 40 LEDs (4f) 1219mm
Cover:1 = Clear
Housing:1 = Black Color2 = White Color4 = Aluminum Color
- x x x - x x x xDGB
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
1219mm [4 .0 in]
901mm [3 . in]
91m
m [
3.6
in]
73m
m [
2.9
in]
30 mm [12.0 in]
Projects
44
Control:2 = DMX
Rebel Bar 350 (IP65)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.Certifications
100-240VAC+ DMX
20 pcs @ 100VAC and 40 pcs @ 240VAC8-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand Alone3 for RGB and 1 for SCXB-R1 Setup Tool100-240V AC500mA12 x Rebel LED (3W)468 @ RGB, 1170 @ CW, 760 @ WW, 1170 @ NW18.3 @ RGB, 48.5 @ CW, 31.3 @ WW, 48.5 @ NW70 @ CW, 85 @ WW, 70 @ NW30W 1,1 kg (2.4 lbs)Aluminum extrusion in anodize processIP65, Wet Location50.000~70.000 hr at 70% lm maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE, cETLus
- x x x - x x x xVersion:N = Normal
Color:AEGHMNPQR
= WW 2700k= NW 4000k= CW 6000k= RGB= WW-CW= Red= Green= Blue= Amber
Beam Angle:CFHMQ
= 10°= 25°= 40°= 10x35°= 30x60°
LED Config:C = 12 LEDs
Cover:1= ClearHousing:
1= Black Color
RBG
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
7m
m [
3.1
in]
92m
m [
3.6
in]
3 0mm [13. in]
70mm [2. in]
1 2mm [7.1 in]
Projects
45
Control:2 = DMX
Rebel Bar HIP65 AC (IP65)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceTotal Lumens Efficiency (lm/W) CRIPower ConsumptionWeightHousingSource LifeOperating Temp.CertificationsProtection Rating
100-240VAC + DMX
10 m @ 100VAC and 20 m @ 240VAC8-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand Alone3 for RGB , 1 for SC, 4 for RGBW XB-R1 Setup Tool100-240VAC350mA18 / 36 x Rebel LED (3W)762 @ RGB, 762 @ RGBA1731 @ WW, 2521 @ NW, 2672 @ CW20.1 @ RGB-CW, 20.1 @ RGB, 70 @ CW67.2 @NW, 43.6 @ WW70 @ CW, 85 @ WW, 70 @ NW30W / 60WL=500 1,1kg (2.4 lbs) / L=1000 2,3 kg (5.1 lbs)Aluminum extrusion in anodize process50.000~70.000 hr at 70% lm maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE, cETLus IP65, Wet Location
- x x x - x x x xVersion:E = CE (100-240VAC)U = cETL (100-240VAC)Color:
ACEGHJKLMNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= RGB= RGB-A (only for 1000 mm)= RGB-WW (only for 1000 mm)= RGB-CW (only for 1000 mm)= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:CFHMP
= 10°= 25°= 40°= 10x35°= 10x60°
LED Config:A = 18 LEDs 500 mmB = 18 LEDs 600 mmC = 36 LEDs 1000 mm
Cover:1= Clear
Housing:4 = Aluminum
RBH
00mm [19.7 in]
1000mm [39.4 in]
410mm [16.1 in]
2 4mm [10.0 in]96m
m [
3. in
]
62mm [2. in]
i n i i n
63m
m [
2. in
]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
46
Control:2 = DMX
Rebel Bar HIP65 AC-H+ (IP65)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight Source Total LumensEfficiency (lm/W)CRIPower ConsumptionWeight
HousingListingSource LifeOperating Temp.
100-240VAC + DMX
8 m @ 100VAC and 16 m @ 240VAC8-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand Alone3 for RGB and SC and 4 for RGBW XB-R1 Setup Tool100-240VAC450mA18 / 36 x Rebel LED (3W)4220 @ RGBA22.8 @ RGB, 20.8 @ RGBAImmeasurable60W / 120WL=500 1,1 kg (2.4 lbs) /L=1000 2,3 kg (5.1 lbs)Aluminum extrusion in anodize processCE, cETLus Pending50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)
- x x x - x x x xVersion:E = CE (100-240VAC)
Color:ACEGHJKLMNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= RGB= RGB-A (only for 1000 mm)= RGB-WW (only for 1000 mm)= RGB-CW (only for 1000 mm)= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:CFHMP
= 10°= 25°= 40°= 10x35°= 10x60°
LED Config:A = 18 LEDs 500 mmB = 18 LEDs 600 mmC = 36 LEDs 1000 mm
Cover:1= Clear
Housing:4 = Aluminum
RBM
00mm [19.7 in]
1000mm [39.4 in]
410mm [16.1 in]
2 4mm [10.0 in]96m
m [
3. in
]
62mm [2. in]
i n i i n
63m
m [
2. in
]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
47
Control:1 = Not Applicable
Rebel Bar HIP65-DCSystem
Max. in ChainCabling System ControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
Constant Current (6 and 12-Wire)
1 pc6-wire DC (1 x 6 pin terminal) Bar = 18 LEDs12-wire DC (2 x 6 pin terminal) Bar = 36 LEDsX-Power HP Pro 24V/350mAControled by 3 DMX Channels--350mA18 x and 36 x Rebel LED (3W)762 @ RGB20.1 @ RGBImmeasurable22,5W and 45W1,1 kg ( 2.5lbs) and 2,3 kg (5 lbs)Aluminum extrusion with matted finishing50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)IP65, Wet LocationCE, cETLus5 m (16,4 ft) cable and terminal connector(s).
- x x x - x x x xVersion:N = Normal
Color:AEGHMNPQR
= WW 2700k= NW 4000k= CW 6000k= RGB= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:CFHMP
= 10°= 25°= 40°= 10x35°= 10x60°
Cover:1= Clear
Housing:4 = Aluminum
RBJ
1000mm [39.4 in]
7mm
[3.
4 in
]m
m [
2.3
in]00mm [19.7 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
LED Config:A B C
= 18 LEDs 500 mm= 18 LEDs 600 mm= 36 LEDs 1000 mm
48
Control:1 = Not Applicable
Rebel Bar HIP68-DCSystem
Max. in ChainCabling System ControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
Constant Current (6 and 12-Wire)
1 pc6-wire DC (1 x 6 pin terminal) Bar = 18 LEDs12-wire DC (2 x 6 pin terminal) Bar = 36 LEDsX-Power HP Pro 24V/350mAControled by 3 DMX Channels--350mA18 x and 36 x Rebel LED (3W)762 @ RGB20.1 @ RGBImmeasurable22,5W and 45WAluminum extrusion with matted finishing50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)IP68, Wet LocationCE18 m (59 ft) cable and terminal connector(s).
- x x x - x x x xVersion:N = Normal
Color:AEGHMNPQR
= WW 2700k= NW 4000k= CW 6000k= RGB= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:CFHMP
= 10°= 25°= 40°= 10x35°= 10x60°
Cover:1= Clear
Housing:4 = Aluminum
RBK
1000mm [39.4 in]
7mm
[3.
4 in
]m
m [
2.3
in]00mm [19.7 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
LED Config:A B C
= 18 LEDs 500 mm= 18 LEDs 600 mm= 36 LEDs 1000 mm
49
Flood InteriorFlood Flood Flood Flood InteriorInteriorInteriorInterior
Onassis Cultural Centre, Athens, Greece
50
ACCLAIMLIGHTINGOnassis Cultural Centre, Athens, Greece
51
Control:1 = Not Applicable
Rebel Eye HPSystem
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsNot Including
Constant Current (6-Wire)
1 pc6-wire DC X-Power HP Pro 24V/350mAControled by 3 DMX Channels--350mA Max.15 x Rebel LED (3W)547 @ CW, 309 @ WW, 414 @ RGB11.6 @ WW, 20.7 @ CW, 19.8 @ RGB83 @ WW18W1,5 kg (3.3 lbs)Plastic moldingIP20, Dry Location50.000 hours at 70% lumen maintenance-0 °C ~ +40 °C (32 °F ~ +104 °F)CELink Cable
- x x x - x x x xVersion: N = Normal
Color: A C G H
= WW 2700k = WW 3200k = CW 6000k = RGB
Beam Angle: D F H
= 15° = 25° = 40°
LED Config: A = 15 LEDs
Cover: 1= ClearHousing:
2= White Color
REA
199mm [7. in]
16m
m [
6.6
in]
44m
m [
1.7
in] 114mm [4. in]
1 3mm [7.2 in]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
52
Control:1 = Not Applicable
Color Ray MR System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousing (Silver)Protection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Current (RJ45 8-wire)
4 pcs8-wire UTP Cat-5 cable with RJ 45Color Ray MR Driver Controled by 4 DMX Channels-24V DC500mA4x Rebel LED (3W)132 @ RGBA, 119 @ WW8.6 @ RGBA, 17 @ WW83 @ WW8.8W90 gr (3.2 oz) Die Cast Aluminum with powder coating IP20, Dry Location50.000 hours at 70% lumen maintenance-10 °C ~ +40 °C (14 °F ~ +104 °F)CERJ45 Terminator (End Cap)
- x x x - x x x xVersion:N = Normal
Color:AGJKL
= WW 2700k= CW 6000k= RGB-A= RGB-WW (2700K)= RGB-CW (6000K)
Beam Angle:EH
= 20°= 40°
LED Config:B = 4 LEDs
Cover:1= Clear
Housing:3= Silver Color
CRC
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
4 mm [1. in]
3mm [0.1 in]
1mm
[2.
0 in
]
53
Flood ExteriorFlood Flood Flood Flood ExteriorExteriorExteriorExterior
Community Church, San Marino USA
54
Flood Exterior
ACCLAIMLIGHTINGCommunity Church, San Marino USA
55
Control:1 = Not Applicable
Rebel Drum Serie CC (IP68)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen (Driving @ 350mA)
Efficiency (lm/W)CRIPower ConsumptionWeightHousing Protection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Current (6-Wire)
1 pc 6-Wire DC Cable + groundX-Power HP Pro 24V/350mAControled by 3 DMX Channels--350mA (underwater 700mA)3 / 6 / 12 / 18 x Rebel LED (3W)80 @ 3 RGB, 161 @ 6 RGB, 320 @ 12 RGB, 465 @ 18 RGB 19.8 @ 18 RGB-3,8W / 7,5W / 15W / 22,5W1,5 / 1,8 / 2,5 / 3 kg (3.3 / 4 / 5.5 / 6.6 lbs)Die Cast 316 Marine Grade Stainless Steel or Aluminum on special request (MOQ)IP68, Submersible up to 19’ (6m)50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE18 m cable and 6-pin terminal connector
- x x x - x x x xVersion: N = Normal
Color: A C E G H N P Q R
= WW 2700k = WW 3200k = NW 4000k = CW 6000k = RGB = Red = Green = Blue = Amber
Beam Angle: C F H
= 10° = 25° = 40°
LED Config: A = 3 LEDsB = 6 LEDsC = 12 LEDsD = 18 LEDs
Cover: 1= Clear
Housing: 6 = Stainless Steel8 = Aluminium (MOQ)
RDA
131mm [ .2 in]
3mm
[2.
1 in
]
12m
m [
4.9
in]
144mm [ .7 in]
13m
m [
.4 in
]
62m
m [
2.4
in]
169m
m [
6.7
in]
17 mm [6.9 in]
62m
m [
2.4
in]
179m
m [
7.0
in]
1 mm [7.3 in]
62m
m [
2.4
in]
m 3 m 6 m 12 m 1
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
n 1 m 60 n 6 in min nn
m . 6 . m i 24 3 0m .
m i
24 3 0 m
12 in 12
100 240 in
Wiring Diagram
56
Control:1 = Not Applicable
Rebel Drum Serie SC-CV (IP68)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen
Efficiency (lm/W)CRIPower ConsumptionWeightHousing Protection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Voltage
1 pc 3-wire DC cable (including ground) ---24V DC (Non Dimmable) 350mA3 / 6 / 12 / 18 x Rebel LED (3W)229 @ 3 CW, 1373 @ 18 CW, 140 @ 3 WW, 842 @ 18 WW65.7 @ CW, 36.8 @ WW83 @ WW3,8W / 7,5W / 15W / 22,5W1,5 / 1,8 / 2,5 / 3 kg (3.3 / 4 / 5.5 / 6.6 lbs)Die Cast 316 Marine Grade Stainless Steel or Aluminum on special request (MOQ)IP68, Submersible up to 19’ (6m)50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE18 m cable with terminal conn.
- x x x - x x x xVersion: N = Normal
Color: A C E G N P Q R
= WW 2700k = WW 3200k = NW 4000k = CW 6000k = Red = Green = Blue = Amber
Beam Angle: C F H
= 10° = 25° = 40°
LED Config: A = 3 LEDsB = 6 LEDsC = 12 LEDsD = 18 LEDs
Cover: 1= Clear
Housing: 6 = Stainless Steel8 = Aluminium (MOQ)
RDB
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
m i
3 n 1 m 60
24 24
Wiring Diagram
131mm [ .2 in]
3mm
[2.
1 in
]
12m
m [
4.9
in]
144mm [ .7 in]
13m
m [
.4 in
]
62m
m [
2.4
in]
169m
m [
6.7
in]
17 mm [6.9 in]
62m
m [
2.4
in]
179m
m [
7.0
in]
1 mm [7.3 in]
62m
m [
2.4
in]
m 3 m 6 m 12 m 1
57
Control:1 = Not Applicable
Rebel Drum 36 CC (IP68)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen (Driving @ 350mA)Efficiency (lm/W)CRIPower ConsumptionWeightHousing Protection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Current (12-Wire)
1 pc 12-wire DC cable (2 x 6 pin terminal)X-Power HP Pro 24V/350mAControled by 3 DMX Channels--350mA (underwater 700mA)36 x Rebel LED (3W)1036 @ RGB, 1734 @ WW, 2299 @ CW19.8 @ RGB, 36 @ WW, 48 @ CW83 @ WW45W3,2 kg (7.1 lbs)Die Cast 316 Marine Grade Stainless Steel or Aluminum on special request (MOQ)IP68, Submersible up to 19’ (6m)50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE18 m cable and 2 x 6-pin terminal conn.
- x x x - x x x xVersion:N = Normal
Color:ACEGHNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= RGB= Red= Green= Blue= Amber
Beam Angle:CFHMP
= 10°= 25°= 40°= 10x35°= 10x60°
LED Config:C = 36 LEDs
Cover:1= Clear
Housing:6 = Stainless Steel8 = Aluminium (MOQ)
RDE
202mm [ .0in]
12m
m [
.0in
]
216mm [ . in]
219mm [ .6in]
in in n n
120m
m [
4.7i
n]
17 mm [6.9in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
58
Control:1 = Not Applicable
Rebel Drum 30 SC-CV (IP68)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousing Protection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Voltage
1 pc3-wire DC cable (including ground) ---24V DC (Non Dimmable) 350mA30 x Rebel LED (3W)1404 @ 30 WW, 45.3 @ 30WW83 @ WW37W3,2 kg (7.1 lbs)Die Cast 316 Marine Grade Stainless Steel or Aluminum on special request (MOQ)IP68, Submersible up to 19’ (6m)50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE18 m cable with terminal conn.
- x x x - x x x xVersion:N = Normal
Color:ACEGNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:CFH
= 10°= 25°= 40°
LED Config:A = 30 LEDs Cover:
1= ClearHousing:6 = Stainless Steel8 = Aluminium (MOQ)
RDD
202mm [ .0in]
12m
m [
.0in
]
216mm [ . in]
219mm [ .6in]
in in n n
120m
m [
4.7i
n]
17 mm [6.9in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
59
Control:1 = Not Applicable
Inground Light CC (IP67)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Current (6-Wire)
6 pcs6-wire DC + 6-Pin IP67 Waterproof Conn.X-Power HP Pro 24V/350mAControled by 3 DMX Channels--700mA Max3 x 3W Cree LED124.6 @ RGB14.5 @ RGBImmeasurable9W700 gr (24.7 oz)Aluminum /stainless steel 316L bezelIP67, Wet Location50.000 hours at 70% lumen maintenance-10 °C ~ +50 °C (14 °F ~ +122 °F)CE20cm Input cable with 6-Pin IP67 Waterproof conn.
- x x x - x x x xVersion:N = Normal
Color:ACEGHNPQR
= WW 2700k = WW 3200k= NW 4000k= CW 6000k= RGB= Red= Green= Blue= Amber
Beam Angle:CDFH
LED Config:A = 3 LEDs
Cover:1 = ClearHousing:
6 = Stainless steel
ILA
103mm [4.1 in]
126m
m [
.0 in
]
4mm [3.3 in]
4mm
[3.
3 in
]
n n
2mm [
2.0 in
]
36m
m [
1.4
in]
10 mm [4.1 in]mm [3. in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
= 10°= 15°= 25°= 40°
m . 6 . n n i
24 3 0 m6
12 in100 240 in
12
n n i
6 in 6 in in
6 in n 200mm 0.6
6 in i
Wiring Diagram
60
Control:1 = Not Applicable
Inground Lite SC-CV 24Vdc (IP67)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC (Constant Voltage)
1 pc2-wire DC cable---24V DC (Non Dimmable) 500mA 3 x 3W Cree LED247.3 @ WW36.6 @ WW-6,5W700 gr (24.7 oz)Aluminum /stainless steel 316L bezelIP67, Wet Location50.000 hours at 70% lumen maintenance-10 °C ~ +50 °C (14 °F ~ +122 °F)CE3 m Cable
- x x x - x x x xVersion:N = Normal
Color:ACEGNPQR
= WW 2700k = WW 3200k= NW 4000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:CDFH
= 10°= 15°= 25°= 40°
LED Config:A = 3 LEDs
Cover:1 = Clear
Housing:6 = Stainless steel
ILB
103mm [4.1 in]
126m
m [
.0 in
]
4mm [3.3 in]
4mm
[3.
3 in
]
n n
2mm [
2.0 in
]
36m
m [
1.4
in]
10 mm [4.1 in]mm [3. in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
61
Control:1 = Not Applicable
Inground Light SC-CV 240Vac (IP67)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight Source Total LumensEfficiency (lm/W)CRIPower ConsumptionWeightHousingListingSource LifeOperating Temp.Including
240VAC or 120VAC (Constant Voltage)
1 pc2-wire AC cable + ground ---240VAC or 120VAC (Non Dimmable) 450mA 3 x 3W Cree LED 247.3 @ WW36.6 @ WW-10W900 gr (31.7 oz)Aluminum /stainless steel 316L bezelCE Certified50.000 hours at 70% lumen maintenance -10 °C ~ +50 °C (14 °F ~ +122 °F)3 m Cable
- x x x - x x x xVersion:E = 240Vac U = 120VacColor:
ACEGNPQR
= WW 2700k = WW 3200k= NW 4000k= CW 6000k= Red= Green= Blue= Amber
Beam Angle:CDFH
= 10°= 15°= 25°= 40°
LED Config:A = 3 LEDs
Cover:1 = Clear
Housing:6 = Stainless Steel
ILC
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
6mm
[0.
2 in
]
90m
m [
3. in
]
mm [3.3 ]
103mm [4.1 in]
126m
m [
.0 in
]
4mm [3.3 in]
4mm
[3.
3 in
]
n n
0mm [2.0 in]
100mm [3.9 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
62
Control:1 = Not Applicable
AL Spot (IP65)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
Constant Current (6-Wire)
1 pc6-wire DC AL Power HP 12RGB (12 x RGB 700mA)Controled by 3 DMX Channels--700mA Max.3 x Rebel LED (3W)106.9 @ RGB, 223.6 @ WW5.5 @ RGB, 12.8 @ WW83 @ WW9W0,6 kg (1.3 lbs)Die Cast Aluminum with powder coatingIP6550.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE5 m cable and 6-pin terminal connector.
- x x x - x x x xVersion:N = Normal
Color:AEGHMNPQR
= WW 2700k= NW 4000k= CW 6000k= RGB= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:ACFH
= Open Beam= 10°= 25°= 40°
LED Config:A = 3 LEDs
Cover:1= Clear
Housing:1= Black Color2= White Color
ASC
72m
m [
2. in
]
9mm [3. in]
74mm [2.9 in]
114m
m [
4. in
]
mm [2.2 in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
n m 16.4 6 in min nn
m . 12 . 6 12 700m
12700 m
12 in 12
100 240 in
6
1 2 3 4 11 12
Wiring Diagram
63
Control:2 = DMX
Color Ray DMX (IP65)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
8 pcs5-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand AloneControled by 3 DMX ChannelsDipswitch (on each Color Ray)24V DC500mA3 x CREE 3W XRE LED124.6 @RGB14.5 @ RGBImmeasurable9,3W1,2 kg (2.6 lbs)Die Cast Aluminum with powder coatingIP65, Wet Location50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE20 cm 5-pin WP input and output cable.
- x x x - x x x xVersion:N = Normal
Color:ACEGHNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= RGB= Red= Green= Blue= Amber
Beam Angle:CFH
= 10°= 25°= 40°
LED Config:A = 3 LEDs
Cover:1= Clear
Housing:1= Black Color2= White Color
CRA
147mm [ . in]
14 mm [ .7 in]
9mm
[3.
in]
100mm [3.9 in]
163m
m [
6.4
in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
64
Control:1 = Not Applicable
Color Ray ND (IP65)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC
8 pcs5-Pin IP67 Waterproof connector(s). ---24V DC500mA3 x CREE 3W XRE LED247.3 @ WW36.6 @ WW83 @ WW9,3W1,2 kg (2.6 lbs)Die Cast Aluminum with powder coatingIP65, Wet Location50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE20 cm 5-pin WP input and output cable.
- x x x - x x x xVersion:N = Normal
Color:ACEGNPQRS
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= Red= Green= Blue= Amber= Special
Beam Angle:CFH
= 10°= 25°= 40°
LED Config:A = 3 LEDs
Cover:1= Clear
Housing:1= Black Color2= White Color
CRB
147mm [ . in]
14 mm [ .7 in]
9mm
[3.
in]
100mm [3.9 in]
163m
m [
6.4
in]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
24
m . . in in
in i n 2m
in in i n
24
Wiring Diagram
65
Control:2 = DMX
Rebel Band 300 Pro (IP66)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen
Efficacy (lm/W)
CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Certifications
100-240VAC + DMX
10 pcs @ 100V AC and 20 pcs @ 240V AC8-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand Alone3 for RGB , 1 for SC, 4 for RGBW XB-R1 Setup Tool100-240V AC350mA36 x Rebel LED (3W)1450 @ RGB-CW / 1543 @ 2700K, 2487@ 6000k30.8 @ RGB-CW / 24.71 @ 2700K, 61.7@ 6000k85 @ 2700k60W4,5 kg (9.9 lbs)Die Cast Aluminum with powder coating50.000~70.000 hr at 70% lm maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CE , cETLus
- x x x - x x x xVersion:E = CE (100-240vAC)U = cETL (100-240vAC)Color:
ACEGHJKLMNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= RGB= RGB-A= RGB-WW= RGB-CW= WW-CW-WW= Red= Green= Blue= Amber
LED Config:C = 36 LEDs
Cover:1 = Clear
Housing:1 = Black Color2 = White Color
RBC
16m
m [
6.1
in]
63m
m [
2. in
]
300mm [11. in] 217m
m [
.6 in
]
140m
m [
. in
]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Beam Angle:CFHKMPQ
= 10°= 25°= 40°= 60°= 10x35°= 10x60°= 30x60°
66
Control:2 = DMX
Rebel Band 300H Pro (IP66)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.CertificationsProtection Rating
100-240VAC + DMX
8 pcs @ 100VAC and 16 pcs @ 240VAC8-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand Alone3 for RGB , 1 for SC, 4 for RGBW XB-R1 Setup Tool100-240VAC450mA36 x Rebel LED (3W)1545 @ RGB-A / 1881 @ 2700K19.3 @ RGB-A / 23.51 @ 2700K85 @ 2700k80W4,5 kg (9.9 lbs)Die Cast Aluminum with powder coating50.000~70.000 hr at 70% lm maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)CEIP66, Wet Location
- x x x - x x x xVersion:E = CE (100-240vAC)U = cETL (100-240vAC)Color:
ACEGHJKLMNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= RGB= RGB-A= RGB-WW= RGB-CW= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:CFHKMPQ
= 10°= 25°= 40°= 60°= 10x35°= 10x60°= 30x60°
LED Config:C = 36 LEDs
Cover:1 = ClearHousing:
1 = Black Color2 = White Color
RBD
16m
m [
6.1
in]
63m
m [
2. in
]
300mm [11. in] 217m
m [
.6 in
]
140m
m [
. in
]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
67
DynaFlood SO (IP66)System
Max. in ChainCabling SystemControlDimming Addressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
90-135VAC or 200-300VAC ELV Dimmable
1 pc2 Conductor, Bare Wire LeadELV or TriacTrailing or leading edge-90-135VAC / 200-300VAC500mA9 x CREE XPE1176 @ WW47 @ WW80 @ WW25W2,70 kg (6 lbs)Die Cast Aluminum50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)IP66, Wet LocationCE, cETLusAttached input cable bare end
Control:1 = Not Applicable
- x x x - x x x xVersion:U = 90VAC / 135 VACE = 200VAC / 300 VAC Color:
ABDE
= WW 2700k= WW 3000k= NW 3500k= NW 4000k
Beam Angle:BEHPW
= 7° (standard)= 20°= 40°= 10x60°= 60° (Via LSF Filter)
LED Config:A = 9 LEDs
Cover:1= Frosted
DFA
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
24 mm [9.6in]
149mm [ .9in]
221m
m [
.7in
]
Wiring Diagram
m . n in n m . 1 i in in
1 2 3
3
90 13 200 300
n i n 3
4
Housing:124
= Black Color= White Color= Gray Color
68
DynaFlood HO (IP66)System
Max. in ChainCabling SystemControlDimming Addressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
90-135VAC or 200-300VAC ELV Dimmable
1 pc2 Conductor, Bare Wire LeadELV or TriacTrailing or leading edge-90-135VAC / 200-300VAC500mA20 x CREE XPE2455 @ WW49 @ WW79 @ WW50W2,70 kg (6 lbs)Die Cast Aluminum50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)IP66, Wet LocationCE, cETLusAttached input cable bare end
Control:1 = Not Applicable
- x x x - x x x xVersion:U E Color:
ABDE
= WW 2700k= WW 3000k= NW 3500k= NW 4000k
Beam Angle:BEHPW
= 7° (standard)= 20°= 40°= 10 x 60°= 60° (Via LSF Filter)
LED Config:B = 20 LEDs
Cover:1= Clear
Housing:124
DFB
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
24 mm [9.6in]
149mm [ .9in]
221m
m [
.7in
]
Wiring Diagram
m . n in n m . 1 i in in
1 2 3
3
90 13 200 300
n i n 3
4
= Black Color= White Color= Gray Color
= 90VAC / 135VAC= 200VAC / 300VAC
69
DynaFlood Quad (IP66)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Warranty Protection Rating CertificationsIncluding
100-277VAC + DMX
16 units @ 120 VAC / 32 units @ 240 VACIP Rated AC Power / Signal CableDirect DMX-512, Manual, Stand Alone4 DMX channelsControl Display100-277VAC, 50/60Hz 10 x 5W High-Power Quad Color LEDsPhotometric Testing in ProgressPhotometric Testing in ProgressPhotometric Testing in Progress60W3.6 kg (8 lbs)Die Cast Aluminum50.000 hours at 70% lumen maintenance-40°C ~ +45°C (-40 °F ~ +113 °F)3 YearsIP66, Wet LocationCEAttached in and output cable bare endPhoto Cel with Adjustable Light Sensitivity
Control:2 = DMX
- x x x - x x x xVersion:N = 90VAC / 277VAC (Bare end)
Color:FH
= RGB-A= RGB-CW 6000k
Beam Angle:EHK
= 20°= 40°= 60°
LED Config:A = 10 x 5W
Cover:1= Clear
Housing:124
DFC
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
221m
m [
.7in
]
149mm [ .9in]
24 mm [9.6in]
Wiring Diagram
m . n in n 12 m . 32 i in in
1 2 3
6
90 13 200 300 12
n i n 6
4
= Black Color= White Color= Gray Color
70
Dyna Drum HO QW (IP66)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionDimensionsWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
100-277V AC + DMX
10 @ 240V / 16AIP rated AC power and DMX-cableDMX-5124 DMX channelsControl Display100-277VAC, 50/60 Hz700mA26 x 10W Quad8791 @ RGBW32 @ RGBWImmeasurable270W426 x 399 x 195 mm13.6 kg (30 lbs)Die Cast Aluminum50.000 hours at 70% lumen maintenance-40 °C ~ +45 °C (-40 °F ~ +113 °F)IP66, Wet LocationCE, cETL Pendingattached DMX in and out.
Control:2 = DMX
- x x x - x x x xVersion:N = Normal
Color:KLU
= RGB-WW 2700k= RGB-CW 6000k= RGB-NW 4000k
Beam Angle:CEFK
= 10°= 20°= 30°= 60°
LED Config:A = 26x 10W Quad
Cover:1= Clear
DDB
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Housing:123
= Black Color= White Color= Gray Color
Dimensions
Wiring Diagram
19 mm [7.7in]3 mm [1 .1in]
400m
m [1
.in
]
340m
m [1
3.4i
n]
m . n in n 12 m . 30 i in in
1 2 3
3
100 277 n i n
3
4
in
12
n i n
19 mm [7.7in]3 mm [1 .1in]
400m
m [1
.in
]
340m
m [1
3.4i
n]
19 mm [7.7in]3 mm [1 .1in]
400m
m [1
.in
]
340m
m [1
3.4i
n]
71
Dyna Drum HO (IP66)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumen Efficacy (lm/W)CRIPower ConsumptionDimensionsWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
100-277V AC + DMX
10 @ 240V / 16AIP rated AC power and DMX-cableDMX-5124 DMX channelsControl Display100-277VAC, 50/60 Hz700mA90 x 3W LEDS9000 @ RGBW, 14805 @ WW, 17273 @ CW33 @ RGBW, 56 @ WW, 65 @ CW-270W426 x 399 x 195 mm13.6 kg (30 lbs)Die Cast Aluminum50.000 hours at 70% lumen maintenance-40 °C ~ +45 °C (-40 °F ~ +113 °F)IP66, Wet LocationCE, cETL Pendingattached DMX in and out.
Control:2 = DMX
- x x x - x x x xVersion:N = Normal
Color:ACDEFLUW
= WW 2700k= WW 3000k = NW 3500k= NW 4000k= CW 5500k= RGB-CW 5500k= RGB-NW 4000k= WW-CW 2700k-5500k
Beam Angle:AFHK
= 6°= 25°= 40°= 60°
LED Config:A = 90 x 3W Single Color LED
Cover:1= Clear
DDA
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
Wiring Diagram
Housing:12
= Black Color= White Color= Gray Color
19 mm [7.7in]3 mm [1 .1in]
400m
m [1
.in
]
340m
m [1
3.4i
n]
m . n in n 12 m . 30 i in in
1 2 3
3
100 277 n i n
3
4
in
12
n i n
19 mm [7.7in]3 mm [1 .1in]
400m
m [1
.in
]
340m
m [1
3.4i
n]
19 mm [7.7in]3 mm [1 .1in]
400m
m [1
.in
]
340m
m [1
3.4i
n]
72
Control:2 = DMX
Rebel Band 600 H+ (IP65)System
Max. in ChainCabling System
ControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceTotal LumensEfficiency (lm/W)CRIPower ConsumptionWeightHousing
ListingSource LifeOperating Temp.
100-240VAC + DMX
2 pcs @ 100VAC and 4 pcs @ 240VAC3-Pin IP67 Waterproof Conn. Power in/out 5-Pin IP67 Waterproof Conn. DMX in/outDirect DMX-512, Manual, Stand Alone3 for RGB and SC and 4 for RGBA XB-R1 Setup Tool100-240Vac600mA104 x Rebel LED (3W)8488 @ RGB29.4 @ RGBImmeasurable290W35 kg (77.2 lbs)Extruded alu with paint finish (silver)Extruded alu with powder coating (black)CE, cETLus Pending50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)
- x x x - x x x xVersion:N = Normal
Color:ACEGHJKLMNPQR
= WW 2700k= WW 3200k= NW 4000k= CW 6000k= RGB= RGB-A= RGB-WW= RGB-CW= WW-CW-WW= Red= Green= Blue= Amber
Beam Angle:BCFHKL
= 5°= 10°= 25°= 40°= 60°= 5 x 20°
LED Config:C = 104 LEDs Cover:
1= ClearHousing:1= Black Color3= Silver
RBN
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
93m
m [
3.7
in]
1mm
[21
.7 in
]
6 4mm [26.9 in]447m
m [
17.6
in]
19m
m [
7.4
in]
600mm [23.6 in]6 mm [2 .9 in]6 mm [27.0 in]
326mm [12. in]
1mm
[21
.7 in
]
240
1 2
12
m . . in in
12 i
n 600 in in
240 i
Wiring Diagram
73
ION Orchard, Singapore
Direct View InteriorDirect View Direct View Direct View Direct View InteriorInteriorInteriorInterior74
ACCLAIMLIGHTINGION Orchard, Singapore
75
AL Puzzle 16
Control:2 = DMX
System
Max. in ChainCabling SystemControlPixelsPixel PitchDMX Channels
Addressing DMX Power requirementsLED CurrentLight Source Total LumensEfficiency (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Including
24VDC + DMX
10 pcs2-wire DC Power-cable + 1 DMX CableDirect DMX-512 or DMX-10001165 mm RGB 3 channels / WW-CW 2 channelsSingle color 1 channelsAuto DMX Addressing24VDC 250mA 16 x SMD 505055 @ RGB13.8 @ RGBup to 85 @ WW4W Master 80 gr (2.8 oz)PCB Type50.000 hours under normal operating conditions0 °C ~ +40 °C (32 °F ~ +104 °F)Mounting clip & 7 cm link cable
- x x x - x x x xVersion:N = Normal
Color:CGHNPQM
= WW 3200k= CW 6000k= RGB= Red= Green= Blue= WW-CW
Beam Angle:A = Open Beam
LED Config:A = 16 LEDs ( 1-Pixel )
Cover:4 = No Cover
Housing:1 = Black Color2 = White Color
APB
Model NumberAPB-224-AAHN
Product NameAL Puzzle 16 RGB (White PCB)
Luminous Intensity55,02 cd
Beam120º
ColorRGB
Delivery includingMounting clip & link cable
16 mm [6. in]
16m
m [
6. in
]
0mm [2.0 in]
0mm
[2.
0 in
]
1 mm [0.6 in]
9mm [3. in]
62m
m [
2.4
in]
12m
m [
0. in
]
n in i
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
76
AL Puzzle Image
Control:2 = DMX
System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
10 pcs 2-wire DC Power-cable + 1 DMX CableDirect DMX-512 or DMX-100048 DMX ChannelsAuto DMX Addressing24V DC 250mA 16 x SMD 5050 62.4 @ RGB10.2 @ RGBImmeasurable6W Master 120 gr (4.2 oz)PCB TypeIndoor, Dry Location50.000 hrs. under normal operation conditions0 °C ~ +40 °C (32 °F ~ +104 °F)CEMounting clip & 7 cm link cable
- x x x - x x x xVersion:N = Normal
Color:CGHNPQ
= WW 3200k= CW 6000k= RGB= Red= Green= Blue
Beam Angle:A = Open Beam
LED Config:A = 16 LEDs ( 16-Pixel )
Cover:4 = No Cover
Housing:1 = Black Color2 = White Color
APC
Model NumberAPC-214-AAHN
Product NameAL Puzzle Image RGB (Black PCB)
Luminous Intensity62,39 cd
Beam113º
ColorRGB
Delivery includingMounting clip & link cable
203mm [ .0 in]
203m
m [
.0 in
]
62mm [2.4 in]
62m
m [
2.4
in]
mm [0.2 in]
111mm [4.4 in]
77m
m [
3.0
in]
1m
m [
0.6
in]
n in i
46m
m [
1. in
]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
77
AL Panel Pro
Control:2 = DMX
System
Max. in ChainCabling SystemControlPixelsPixel PitchDMX ChannelsAddressing DMX Power requirementsLight Source Total LumensEfficiency (lm/W)Power ConsumptionWeightHousing
Source LifeOperating Temp.Including
24VDC + DMX
6 pcs using DMX-512 / 12 pcs using DMX-10002-wire DC Power-cable + 1 DMX CableDirect DMX-512 or DMX-10002540 mm Controled by 75 DMX ChannelsAuto DMX Addressing24VDC 25 x SMD 5050 91.7 @ RGB10.3 @ RGB10W300 gr (10.6 oz) / 480 gr (16.9 oz)Polycarbonate, V0 ABS+semitransparent plastic (diffuser)50.000 hours under normal operating conditions0 °C ~ +37 °C (32 °F ~ +98.6 °F)Mounting clips & link cable
- x x x - x x x xVersion:N = Normal
Color:CGHNPQ
= WW 3200k= CW 6000k= RGB= Red= Green= Blue
Beam Angle:A = Open Beam
LED Config:A = 25 LEDs
Cover:4 = No Cover
Housing:1 = Black Color2 = Black Color ( PCB Only )3 = White Color ( PCB Only )
APA
Model NumberAPA-214-AAHNAPA-224-AAHN
Product NameAL Panel Pro RGB AL Panel Pro RGB (Black PCB Only)
Luminous Intensity520 cd/m²520 cd/m²
Beam120º120º
ColorRGBRGB
Delivery includingMounting clips & link cable + frosted Cover -
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
37mm [1. in] 200mm [7.9 in]
40m
m [
1.6
in]
1 6mm [6.1 in]174mm [6.9 in]
200m
m [
7.9
in]
140m
m [
. in
]
78
AL Panel Pro Frame
Control:2 = DMX
System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
100-240VAC + DMX-1000
1 Complete FrameAC Power-cable + 1 DMX CableDMX-1000Controled by 900 DMX ChannelsXB-R1 Setup Tool24V DC 4,8A 300 x SMD 5050 2292 @ RGB10.3 @ RGBImmeasurable120W 18.6 kg (41.1 lbs)Metal Frame and Polycarbonate Panels IP20, Dry Location50.000 hours under normal operating conditions0 °C ~ +37 °C (32 °F ~ +98.6 °F)CEMounting clips & link cable
- x x x - x x x xVersion:E = 240Vac ( VDE plug )U = 100Vac ( UL plug )Color:
CGHNPQ
= WW 3200k= CW 6000k= RGB= Red= Green= Blue
Beam Angle:A = Open Beam
LED Config:A = 12x25 LEDs
Cover:4 = No Cover
Housing:1 = Black Color
APL
Model NumberAPL-214-AAHEAPL-214-AAHU
Product NameAL Panel Pro Frame (VDE) AL Panel Pro Frame (UL)
Luminous Intensity520 cd/m²520 cd/m²
Beam120º120º
ColorRGBRGB
Delivery including12 x AL Panel Pro and 1 x X-PD-150 (VDE) 12 x AL Panel Pro and 1 x X-PD-150 (UL)
6 0mm [2 .6 in]
00mm [31. in]
00mm [19.7 in]
400m
m [
1.7
in]
600m
m [
23.6
in]
62m
m [
2.7
in]
730mm [2 .7 in]
147m
m [
. in
]
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
79
Control:2 = DMX
Pixel StickSystem
Max in Chain (DMX-512)Cabling SystemControlPixelsDMX ChannelsAddressing DMX Power requirementsLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
5VDC + DMX
6 pcs Pixel stick 10 / 12 pcs Pixel stick 5 (2,4 mtr)6-wire cable + 6-pin connectorPixel driver mini (DMX-512 or DMX-1000)5 pixels / 10-pixelsL=20 cm 15 channels / L=40 cm 30 channelsAuto DMX Addressing5V DC 5 x SMD 5050 / 10 x SMD 505055.02 @ RGB16.18 @ RGBImmeasurable1,25W / 2,5W 15 gr (0.53 oz) / 30 gr (1.06 oz)Polycarbonate50.000 hours under normal operating conditions0 °C ~ +40 °C (32 °F ~ +104 °F)IP20, Dry LocationCE1 pc Mounting clip + 1 pc screw
- x x x - x x x xVersion: N = Normal
Color: CGH
= WW 3200k = CW 6000k= RGB
Beam Angle: A
= Open Beam
LED Config: A = 5 LEDs 20cmB = 10 LEDs 40cmCover:
1 = Clear Housing: 1 = Black Color PCB2 = White Color PCB
PSB
Model NumberPSB-221-AAHNPSB-221-BAHNPSB-211-AAHNPSB-211-BAHN
Product NamePixel Stick 5 1,25W (White PCB)Pixel Stick 10 2,5W (White PCB)Pixel Stick 5 1,25W (Black PCB)Pixel Stick 10 2,5W (Black PCB)
Beam120º120º120º120º
ColorRGB RGBRGBRGB
Delivery including1 pc Mounting clip1 pc Mounting clip1 pc Mounting clip1 pc Mounting clip
ControlPixel driver mini (5Vdc + DMX)Pixel driver mini (5Vdc + DMX)Pixel driver mini (5Vdc + DMX)Pixel driver mini (5Vdc + DMX)
Indoor Fixtures
www.acclaimlighting.eu
Model Number
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
2 mm [1.0 in]
392mm [1 .4 in]
9mm [0.3 in]9mm [0.4 in]
14mm [0.6 in]
n in i
9mm
[0.
4 in
]
410mm [16.1 in]
7mm
[0.
3 in
]13m
m [
0. in
]
40mm [1.6 in]
Projects
80
Cat Walk Panel (touch control)
Control:2 = DMX
System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
6 pcs using DMX-512 / 11 pcs using DMX-10002-wire DC Power-cable + 1 DMX CableDirect DMX-512 or DMX-1000Controled by 75 DMX ChannelsAuto DMX Addressing24V DC 450mA 25 x SMD 5050 91.7 @ RGB10.3 @ RGBImmeasurable10,8W 225 gr (7.9 oz)PCB TypeIndoor, Dry Location50.000 hrs. under normal operation conditions-10 °C ~ +40 °C (14 °F ~ +104 °F)CEMounting tape +Link Cable 6-pin Terminal 90 mm
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 25 LEDs
Cover:4 = No Cover
Housing:2 = White Color
CWA
Model NumberCWA-224-AAHN
Product NameCatwalk Panel RGB
Luminous Intensity915 cd/m²
Beam120º
ColorRGB
Delivery includingMounting tape + Link Cable
Indoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
192mm [7.6 in]
192m
m [
7.6
in]
mm [0.3 in]40mm [1.6 in]
81
Pennsylvania Convention Centre, USA
Direct View ExteriorDirect View Direct View Direct View Direct View ExteriorExteriorExteriorExterior82
ACCLAIMLIGHTINGPennsylvania Convention Centre, USA
83
AL Pixel 1 (IP65)
Control:2 = DMX
System
Max in Chain (DMX-512)Cabling SystemControlPixelsDMX ChannelsAddressing DMX Power requirementsLight SourceLumenCRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
9VDC + DMX
1 string 4-wire cable + 4-pin connectorAL Pixel Driver 9V (DMX-512 or DMX-1000)50 pixels150 channelsAuto DMX Addressing9V DC 50 x SMD 5050 3.6 @ 1 pixel83 @ WW0,5W per pixel / 25W per 50 pixels 2,50 kg (5.5 lbs)Polycarbonate with UV stablizer50.000 hrs. under normal operation conditions-20 °C ~ +40 °C (-4 °F ~ +104 °F)IP65, Wet LocationCEFeet Cable 5 meter (16,4 ft)
- x x x - x x x xVersion:N = Normal
Color:CGH
= WW 3200k= CW 6000k= RGB
Beam Angle:A = Open Beam
LED Config:A = 50 LEDs 10cmB = 50 LEDs 15cmC = 50 LEDs 30cmD = 50 LEDs 35cm
Cover:1 = Clear
Housing:1 = Black Color2 = White Color9 = Special Color
APE
Model NumberAPE-221-DAHNAPE-221-CAHN
Product NameAL Pixel 1 (string 50 dots & 35cm Pitch)AL Pixel 1 (string 50 dots & 30cm Pitch)
Total Lumens3,6 lm Per pixel3,6 lm Per pixel
Beam120º120º
ColorRGBRGB
Delivery includingFeet Cable 5 meter (16,4 ft)Feet Cable 5 meter (16,4 ft)
ControlAL Pixel 1 Driver (9V + DMX)AL Pixel 1 Driver (9V + DMX)
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
24m
m [
0.9
in]
19m
m [
0.7
in]
14mm [0. in]
9
9
9 n n m 16.4
i im . 300 mm 1
m . 0 n in in
i 1
12 in 12
in
100 240 in
i 1 im in n n
Wiring Diagram
84
AL Pixel 6 (IP66)
Control:2 = DMX
System
Max in Chain (DMX-512)Cabling SystemControlPixelsDMX ChannelsAddressing DMX Power requirementsLight SourceLumenCRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
24 DC + DMX
1 string 4-wire cable + 4-pin connectorAL Pixel 6 Driver 24V (DMX-512 or DMX-1000)50 pixels150 channelsAuto DMX Addressing24V DC 50 x 6 pcs SMD 5050 20 @ 1 pixel RGB / 50 @ 1 pixel CW83 @ WW1.3W per pixel / 60W per 50 pixels 150g (5.3 oz)Polycarbonate with UV stabilizer50.000 hours at 70% lumen maintenance-20 °C ~ +50 °C (-4 °F ~ +122 °F)IP66, Wet LocationCEFeet Cable 5 meter (16,4 ft)
- x x x - x x x xVersion:N = Normal
Color:CGH
= WW 3200k= CW 6000k= RGB
Beam Angle:A = Open Beam
LED Config:A B CE F
Cover:1 = Clear
Housing:1 = Black Color2 = White Color9 = Special Color
APF
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
17.
mm
[0.
7]
40.0mm [1.6 ]
36.0
mm
[1.
4]
24
24
24 n n m 16.4
i im . 300 mm 1
m . 0 n in in
12 in 12
in
100 240 in
i 6 i
i 6
Wiring Diagram
= 50 LEDs 10cm= 50 LEDs 15cm= 50 LEDs 30cm= 75 LEDs 5cm= 100 LEDs 5cm
Model NumberAPF-221-CAHNAPF-221-CAGN
Product NameAL Pixel 6 RGB (string 50 dots & 30cm Pitch)AL Pixel 6 CW (string 50 dots & 30cm Pitch)
Total Lumens20 lm Per pixel50 lm Per pixel
Beam120º120º
ColorRGBCW 6000k
Delivery includingFeet Cable 5 meter (16,4 ft)Feet Cable 5 meter (16,4 ft)
ControlAL Pixel 6 Driver (24V + DMX)AL Pixel 6 Driver (24V + DMX)
85
Control:2 = DMX
AL Dome DMX (IP65)System
Max. in ChainCabling SystemControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
32 pcs 2-wire DC Power-cable + 1 DMX CableDirect DMX-512 or DMX-1000RGB 3 ch / SC 1 ch / RGB+W 4 chAuto DMX Addressing24V DC 80mA 6 x SMD 5050 11.5 @ Clear, 8.5 @ Diffuse, 7.6 @ Milky38.1 @ CLear, 17.5 @ Diffuse83 @ WW2W 80 gr (2.8 oz)Polycarbonate and UV StabilizerIP65, Wet Location50.000 hours under normal operating conditions-10 °C ~ +50 °C (14 °F ~ +122 °F)CEAttached 15 cm Input and output cable (IP65)
- x x x - x x x xVersion: N = Normal
Color: CEGHLNPQ
= WW 3200k = NW 4000k = CW 6000k= RGB= RGB-CW= Red= Green= Blue
Beam Angle: A
= Open Beam
LED Config: A = 6 SMD LEDs
Cover: 1 = Clear2 = Frosted3 = Milky
Housing: 1 = Black Color
ADA
Model NumberADA-212-AAHN ADA-211-AAHNADA-213-AAHN
Product NameAL Dome DMX DiffuseAL Dome DMX Clear AL Dome DMX Milky White
Luminous Intensity8,5 lm11,5 lm7,6 lm
Beam120º120º120º
ColorRGB RGBRGB
Delivery includingInput cable 15cm / Output cable 15cmInput cable 15cm / Output cable 15cmInput cable 15cm / Output cable 15cm
Control24Vdc + DMX24Vdc + DMX24Vdc + DMX
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Projects
44mm [1.7in]
40mm [1. in]
62m
m [
2.in
]
10m
m [
0.4i
n]
4 mm [1.9in]
44mm [1.7in]
42m
m [
1.6i
n]
10m
m [
0.4i
n]
40mm [1. in]
mm
[0.
3in]
29m
m [
1.1i
n]
m m i
86
Description
www.acclaimlighting.eu
Projects
Dimensions
Model Number
Control:2 = DMX
AL Bar AC DMX (IP65)System
Max in Chain (DMX-512)
Max in Chain (DMX-1000)
Cabling SystemControlPixelsDMX ChannelsAddressing DMX Power requirementsLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtetion Rating CertificationsSource LifeOperating Temp.Including
100-240VAC + DMX
20 Mtr @ 100VAC and 20 Mtr @ 240VAC36 Mtr @ 100VAC and 72 Mtr @ 240VAC8-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512 or DMX-10005 pixels / 10 pixels15 channels / 30 channelsAuto DMX Addressing100-240V AC, 277V AC30 / 60 pcs SMD 5050 104.6 @ RGB5.6 @ RGBImmeasurable9W / 18W 2 kg (4.4 lbs) / 4 kg (8.8 lbs)Aluminum extrusion case, PC cover (UV stabilizer)IP65, Wet locationCE, cETLus50.000 hours under normal operating conditions-20 °C ~ +50 °C (-4 °F ~ +122 °F)Attached Link Cables
- x x x - x x x xVersion:NUColor:
CE GHN P Q
Beam Angle:A = Open Beam
LED Config:A = 30 LEDs 60cm (5 pixels)B = 60 LEDs 120cm (10 pixels)Cover:
2 = Frosted
Housing:3 = Gray Color
ABA
Model NumberABA-232-AAHN ABA-232-BAHN
Product NameAL Bar AC 600 RGBAL Bar AC 1200 RGB
Luminous Intensity52,3 lm 104,6 lm
Beam120º120º
ColorRGB RGB
Delivery including100-277VAC + DMX100-277VAC + DMX
Outdoor Fixtures
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
1200mm [47.2 in]
67mm [2.7 in]
96m
m [
3. in
]
1199mm [47.2 in]
= WW 3200k = CW 6000k= NW 4000k= RGB= Red= Green= Blue
= 100-240VAC= 277AC
87
AL Ball MK-l DMX (IP65)System
Max. in ChainCabling System ControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousing Source LifeProtection Rating Operating Temp.CertificationsIncluding
24VDC + DMX (Backside cable entree)
20 pcs5-Pin IP67 Waterproof Conn. (Power + DMX)( cable entry Backside )Direct DMX-512, Manual, Stand Alone3 DMX Channels XB-R1 Setup Tool24V DC 105mA 12 x SMD 5050 63 @ RGB5.6 @ RGBImmeasurable2,5W 300 gr (10.6 oz )Aluminum alloy construction with Polycarbonate and UV Stabilizer50.000 hours under normal operating conditionsIP65, Wet Location-20 °C ~ +50 °C (-4 °F ~ +122 °F)CEAttached input cable with 1 pc 5-pin WP male conn.
Control:2 = DMX
- x x x - x x x xVersion:N = Normal
Color:CEGHNPQ
= WW 3200k= NW 4000k= CW 6000k= RGB= Red= Green= Blue
Beam Angle:A = Open Beam 108º
LED Config:A = 12 LEDs
Cover:1 = Clear2 = Frosted
Housing:1 = Black Color4 = Aluminum Color
ABD
93m
m [
3.7
in]
73mm [2.9 in]
6mm [2.2 in]
77m
m [
3.0
in]
3mm
[2.
1 in
]
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
88
AL Ball MK-ll DMX (IP65)System
Max. in ChainCabling System ControlDMX ChannelsAddressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousing Protection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
20 pcs5-Pin IP67 Waterproof Conn. (Power + DMX)(Side cable entry)Direct DMX-512, Manual, Stand Alone3 DMX Channels XB-R1 Setup Tool24V DC 105mA 12 x SMD 5050 63 @ RGB5.6 @ RGBImmeasurable2,5W 300 gr (10.6 oz )Aluminum alloy construction with Polycarbonate and UV StabilizerIP65, Wet Location50.000 hours under normal operating conditions-20 °C ~ +50 °C (-4 °F ~ +122 °F)CEAttached input cable with 5-pin WP male conn.Attached output cable with 5-pin WP female conn.
Control:2 = DMX
- x x x - x x x xVersion:N = Normal
Color:CEGHNPQ
= WW 3200k= NW 4000k= CW 6000k= RGB= Red= Green= Blue
Beam Angle:A = Open Beam
LED Config:A = 12 LEDs
Cover:1 = Clear2 = Frosted
Housing:1 = Black Color4 = Aluminum Color
ABE
93m
m [
3.7
in]
73mm [2.9 in]
6mm [2.2 in]
77m
m [
3.0
in]
3mm
[2.
1 in
]
Outdoor Fixtures
ACCLAIMLIGHTING
www.acclaimlighting.eu
Model Number
Dimensions
Projects
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.89
AL Tube Pro 500/1000 (IP65)
Control:2 = DMX
System
Max. in ChainCabling SystemControlDMX Channels (L=500 mm)DMX Channels (L=1000 mm)Addressing DMX Power requirementsLED CurrentLight SourceLumenEfficiency (lm/W)CRIPower ConsumptionWeightHousingProtection Rating Source LifeOperating Temp.CertificationsIncluding
24VDC + DMX
8 m ( 26,2 ft )5-Pin IP67 Waterproof Conn. (Power + DMX)Direct DMX-512, Manual, Stand AloneMin. 3 DMX Chan. & Max. 18 DMX Chan.Min. 3 DMX Chan. & Max. 36 DMX Chan.XB-R1 Setup Tool24V DC 330mA / 630mA 36 / 72 x SMD 5050 612.3 @ WW, 146.4 @ RGB45.1 @ WW, 10.9 @ RGB85 @ WW8W / 15W 300 gr (10.6 oz) / 480 gr (16.9 oz)Polycarbonate with UV StabilizerIP65, Wet Location50.000 hours under normal operating conditions0 °C ~ +40 °C (32 °F ~ +104 °F)CEAttached In and output cable with 5-pin WP conn.
Version:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A = 36 LEDs 500 mm (6-Pixels)B = 72 LEDs 1000 mm (12-Pixels)Cover:
2 = FrostedHousing:2 = White Color
Model NumberATA-222-AAHNATA-222-BAHN
Product NameAL Tube Pro 500 RGB AL Tube Pro 1000 RGB
Length500 mm
1000 mm
Beam166 x 132º166 x 132º
ColorRGBRGB
Delivery includingMounting Clips and CableMounting Clips and Cable
Outdoor Fixtures
ACCLAIMLIGHTING
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
Dimensions
Model Number
www.acclaimlighting.eu
Projects
- x x x - x x x xATA
1000mm [39.4 in]00mm [19.7 in]
67m
m [
2.6
in]
43mm [1.7 in]
3 mm [1.4 in]
90
AL Pixel Bar (IP65)
Control:2 = DMX
System
Max in Chain (DMX-512)Max in Chain (DMX-1000)ControlPixelsDMX ChannelsAddressing DMX Power requirementsCurrent ConsumptionLight SourceLumen CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
24 DC + DMX
max. 3 m (56 pixels)max. 6 m (56 pixels)X-Power HP Pro 24V/350mA28/56 pixels84/168 channelsAuto DMX Addressing24V DC 700mA per meter28/56 RGB color leds278 @ RGBImmeasurable9W/17W per meter1.2kg/2.4kg (2.65/5.3 lbs)Aluminum extrusion+ plastic cover50.000 hours under normal operating conditions-20 °C ~ +50 °C (-4 °F ~ +104 °F)IP65CEAttached In and output cable with 5-pin WP conn and 2 pcs mounting clips
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A B
Cover:1 = Frosted
Housing:1 = Black Color
APD
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
= 28 LEDs (28pixel)= 56 LEDs (56pixel)
Projects
mm [2.3in]
69mm [2.7in]
00mm [19.7in] 1000mm [39.4in]
37m
m [1
.4in
]
91
AL Pixel Tube Pro (IP65)
Control:2 = DMX
System
Max in Chain (DMX-512)Max in Chain (DMX-1000)ControlPixelsDMX ChannelsAddressing DMX Power requirementsCurrent ConsumptionLight SourceLumen CRIPower ConsumptionWeightHousingSource LifeOperating Temp.Protection Rating CertificationsIncluding
24 DC + DMX
max. 4 m (40 pixels)max. 8 m (40 pixels)Direct DMX-512 or DMX-100020/40 pixels60/120 channelsAuto DMX Addressing24V DC 55mA per pixel / 2.8A per 50 pixels 20/40 SMD LEDsPhotometric Testing in progressImmeasurable6.5W @ 20 pixels / 13W @ 40 pixels 1kg/1.7kg (2.2/3.8 lbs)Aluminum extrusion+ plastic cover50.000 hours under normal operating conditions-20 °C ~ +50 °C (-4 °F ~ +122 °F)IP65, Wet LocationCEAttached In and output cable with 5-pin WPconn and Mounting clips.
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A B
Cover:2 = Frosted (Round Tube)3 = Frosted (Flat Tube)Housing:
1 = Black Color
APT
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
= 20 LEDs (20 pixel)= 40 LEDs (40 pixel)
Projects
00mm 1000mm [39.4in]27mm [1.1in]
6m
m [2
.7in
]
23mm [0.9in]
92
Pixel Tube 15/30 (IP64)
Control:2 = DMX
System
Max in Chain (DMX-512)Cabling SystemControlPixelsPixel PitchDMX ChannelsAddressing DMX Power requirementsLight SourceBrightnessHousingSource LifeOperating Temp.Protection Rating Certifications
5V DC
6 pcs Pixel Tube 30 / 12 pcs Pixel Tube 15 (7,2 mtr)6-wire cable + 6-pin connectorDMX-512 / DMX-1000 (PSD-2 Driver)15 pixels / 30-pixels40mmL=60 cm 45 channels / L=120 cm 90 channelsAuto DMX Addressing5V DC 15 x SMD 5050 / 30 x SMD 5050915cd/sqmPolycarbonate with UV stablizer50.000 hours under normal operating conditions0 °C ~ +40 °C (32 °F ~ +104 °F)IP64, Wet LocationCE
- x x x - x x x xVersion:N = Normal
Color:H = RGB
Beam Angle:A = Open Beam
LED Config:A B
Cover:1 = Clear
Housing:7 = Clear
PTA
Outdoor Fixtures
www.acclaimlighting.eu
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
= 15 LEDs (15-Pixels)= 30 LEDs (30-Pixels)
Projects
12 mm [4 1.4 ]
2 mm [1.1 ]
19m
m [
0.]
1 mm [0.6 ]
1200mm [3 11.2 ]
131mm [ .2 ]7mm [3.4 ]
93
DMX Splitter / BoosterDMX Splitter / BoosterDMX Splitter / BoosterDMX Splitter / BoosterDMX Splitter / Booster
Kubik, Melbourne, Austria
94
DMX Splitter / Booster
ACCLAIMLIGHTINGKubik, Melbourne, Austria
95
DD-2 MINISystem
Power requirementsPower InputPower ThruDMX InputDMX OutputHousingIngress Protection RatingControllistingOperation TemperatureStorage TemperatureDimensions
Weight
2 way DMX Distributor
12 ~ 24 Vdc2-pin terminal 2-pin terminal3-pin terminal3-pin terminal (2pcs)PolyCarbonate IP20DMX-512CE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)115 (L) x 54 (W) x 23 (H) mm ( 4.52 x 2.1 x 0.9 in)150g (5.3 oz)
11 mm [4. in]
4mm
[2.
1 in
]
23mm [0.9 in]
2
1
2
12 24
12 24
6
www.acclaimlighting.eu
Description
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The Acclaim Lighting DD-2 Mini is a compact one in/two out DMX 512 distribution box. Input and outputs are electronically isolated, both outputs have their own output driver to boost the DMX signal. LEDs are present to indicate ‚power on‘ and ‚output load connected‘. Power- and DMX con-nections are on 3 pin terminal connectors. Power requirements are 12-24V, power supply not included.
DD-6 WM ProSystem
Power RequirementDMX InputDMX ThruDMX OutputHousingIngress Protection RatingControllistingOperation TemperatureStorage TemperatureDimensions
Weight
6 way isolated DMX splitter-Wallmount
100 ~ 240 Vac, 50/60Hz3 pin terminal socket3-pin terminal socket6 pcs of 3-pin terminal sockets Sheet metal with powder paintingIP20DMX 512CE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)134 (L) x 126 (W) x 50 (H) mm (5.3 x 5 x 2 in)1kg (2.2 lbs)
DescriptionThe Acclaim Lighting DD-6 WM Pro is a wall mount isolated DMX 512 splitter featuring one DMX input with loop-through and 6 DMX outputs. Input and outputs are electronically isolated, all outputs have their own output drivers to boost the DMX signal. All DMX connections are on 3 pin termi-nal connectors.
12m
m [
4.9
in]
134mm [ .3 in] 40mm [1.6 in]
Dimensions
96
DD-6System
Power RequirementDMX InputDMX OutputHousingIngress Protection RatingControllistingOperation TemperatureStorage TemperatureDimensions
Weight
6 way DMX Splitter
100 ~ 240 Vac, 50/60Hz1 pcs 3-pin + 1 pcs 5-pin XLR male socket6 pcs 3-pin + 6 pcs 5-pin XLR female socketSheet metal with powder paintingIP20DMX 512CE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)19“ x 1U (482 x 125 x 44 mm)(19 x 5 x 1.7 in)2kg (4.4 lbs)
4 2mm [19.0 in]
1mm
[2.
0 in
]
1 3mm [6.0 in]
www.acclaimlighting.eu
Description
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The Acclaim Lighting DD-6 WM is a 19“ 1U rack mount DMX 512 distributor featuring DMX input with loop-through and 6 DMX outputs. Inputs and outputs are electronically isolated and all outputs have their own output drivers to boost the DMX signal. Dual inputs are available and dual link outputs are available for linking to another DD-6 unit. A front switch selects 120 Ohms termination ON/OFF, thus facilitating linking the incoming DMX signal to another DD-6 unit. All DMX connections are on XLR3 connectors.
DD-6 DR (Din Rail DMX Splitter)System
Power RequirementDMX InputDMX OutputHousingIngress Protection RatingControlCertificationsOperating TemperatureDimensionsWeight
6 way isolated DMX Splitter
8 ~ 12V DC1 pcs 3-pin terminal socket6 pcs 3-pin terminal socketPolyCarbonateIP20DMX 512CE0 °C ~ +40 °C (32 °F ~ + 104 °F)105 x 86 x 60 mm (4.1 x 3.4 x 2.4 inch)160gr (0,35 lbs)
Description
The Accaim Lighting DIN Rail DMX Splitter is designed with installers and system integrators in mind. The Splitter features a DIN Rail enclosure that allows easy mounting with detachable terminal connections for a quick replacement of the unit. The splitter takes a DMX signal and sends it out again on its 6 DMX output ports allowing a star-topology for efficient cable usage. Each output port is capable of driving 32 more devices. The splitter can also function as a signal booster as each port supports another 300 meter long connection.The DMX input port is protected through optical isolation, safe guarding the splitter and its connected equipment against power surges and dangerous ground loops.
Dimensions
10 mm [4.1in]
6mm
[3.
4in]
10 mm [4.1in]
60mm
[2.4in]
10 mm [4.1in]
6mm
[3.
4in]
10 mm [4.1in]
60mm
[2.4in]
97
DriversDriversDriversDriversDrivers
7even, Heerlen, The Netherlands
98
ACCLAIMLIGHTING7even, Heerlen, The Netherlands
99
Rebel Chip DriverSystem
Constant Current OutputLoadControl OptionsAddressing DMX DMX ChannelsPower requirementsDMX InputDMX OutputCertificationsOperating Temp.Storage Temp.HousingIngress Protection RatingDimensionsWeightIncluded
48 V DC / 5-Wire (Only for Rebel-Chip )
350mA (5-pin Terminal)Max 12 Rebel Chip, 60WDMX-512XB-R1 Setup toolRGB = 3, C&B = 2, SC = 1 channel100-240VAC3-pin Terminal3-pin TerminalCE, cETL0 °C ~ +50 °C (32 °F ~ + 122 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP20204 (L) x 61 (W) x 60 (H) mm ( 4.5 x 2.1 x 0.9 in)0.8Kg ( 1.8 lbs)1 pc First Cable Rebel Chip 3m. 1 pc Rebel Chip Terminator
61m
m [
2.4i
n]
60mm [2.4in]204mm [ .0in]
Constant Current 350mA / 48V
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting Rebel Chip Driver is specially designed to drive Acclaim Lighting Rebel Chips. Up to 12 Rebel Chips can be connected in chain to one Rebel Chip Driver. In master mode, AUTO and MANUAL modes are available, in slave mode, RGB, COLOR & BRIGHTNESS and COLOR modes are available. The Driver features 10 built-in patterns plus a sequence of patterns 1-10 with adjustable chase speed and fade time. Up to 16.000.000 color effects and color changing modes can be created. Standard DMX 512 protocol on 3-pin input and output terminals. Included in delivery are one first cable 3,0 meter (Rebel Chip Driver to first Rebel Chip) and one Rebel Chip terminator. All functions and settings can be programmed using the XB-R1 Set-up unit (separate item - not included).
Model NumberDRC-411-MAAE
Product NameRebel Chip Driver (CE)
Accessories1 pc First Cable Rebel Chip 3m. CA-BNF-00300 (included w/purchase Driver) 1 pc Rebel Chip terminator. CO-BNT-00000 (included w/purchase Driver)
n
i
12
12
220 240
i i
m . 43 0m
m . 12 i
100
X-Power HP ProSystem
Constant Current OutputControl OptionsLoad
Addressing DMXPower requirementsDMX InputDMX OutputDMX ChannelsListingOperating Temp.Storage Temp.HousingDimensions
Weight
Constant Current (6-Wire)
6-pcs (6-pin Terminal 3x350mA)DMX-512, Stand Alone6 fixtures with 18 LEDs 1W (1 x 6-pin connector)
3 fixtures with 36 LEDs 1W (2 x 6-pin connector)
Dipswitch 110 Vac (3.2A) / 240 Vac (1.6A)3-pin Terminal and 3-pin XLR3-pin Terminal and 3-pin XLRMin. 3 (1 x RGB), Max. 18 (6 x RGB)CE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)Sheet metal with powder painting300,5 (L) x 150 (W) x 66 (H) mm (11.8 x 5.9 x 2.6 in)1,8kg (4 lbs)
10m
m [
.9 in
]
66m
m [
2.6
in]
301mm [11.9 in]
1 2 3
1 2 3
1 n 2 3
1
2
2
1
3
3
1 2 3 4 6 7 9 10 1 2 3 4 6
2 4 6
1 3
1 2 3
1 2 3
1 n 2 3
1
2
2
1
3
3
1 2 3 4 6 7 9 10 1 2 3 4 6
66m
m [
2.6
in]
in
Constant Current RGB Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting X-Power HP Pro is a 350mA Constant Current 150W 24V power Supply unit designed to drive high powered LED Fixtures. With it‘s six selectable outputs and DMX in & out, you have plenty of options when powering up the Rebel Bars, Rebel Drums and more. You are able to control all 6 outputs together with 3 DMX channel, or 2 groups of 3 outputs with 6 DMX Channels or 3 groups of 2 outputs with 9 DMX Channels or 6 outputs all separate contralable with 18 DMX Channels. The X-Power HP Pro is also TV proof and can be used in TV Studios. There are also 7 build-in programs available if you like to use the Stand alone function. You are able to set the Chasing speed and the fade time of all 7 build -in programs.
Model NumberDCC-111-MAAE DCC-111-MAAU
Product NameX-Power HP Pro 24V 350mA (VDE Plug 240Vac) X-Power HP Pro 24V 350mA (UL Plug 110Vac)
n
220 240 m . 6
i i
2
6
12
12 m . 24 6
m .3 3 0m
101
AL Dimmer 1 HPSystem
Control OptionsConstant Current OutputLoad
Control OptionsAddressing DMXDMX ChannelsPower requirementsDMX InputDMX OutputAnalog InputAnalog ThruListingOperating Temp.Storage Temp.HousingIP RatingDimensions
WeightNot Included
Constant Current
DMX-512, Manual, Stand Alone350mA / 500mA / 700mA (2-pin Terminal)Max 3-LEDs @ 12 Vdc Max 6-LEDs @ 24 Vdc DMX-512, Manual, 0-10V, 1-10VDipswitch 112 ~ 24 Vdc / 6A Max. (1 x 4-pin Terminal)3-pin Terminal3-pin Terminal0-10V / 1-10V (2-pin Terminal)0-10V / 1-10V (2-pin Terminal)CE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP20115 (L) x 54 (W) x 23 (H) mm ( 4.5 x 2.1 x 0.9 in)150g ( 5.3 oz)Din Rail Adapter (sold separately)
4.0m
m [2
.1in
]
11 .0mm [4. in]
3.m
m [0
.1in
]
12 24
12 24
imm 1
.0mm [3.3in]
24.3
mm
[1.0
in]
23.0
mm
[0.9
in]
109764321
n
1211
101.0mm [4.0in]
0 10 1 10
0 10 1 10
3 0m 00m 700m
Single Color Constant Current Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
Wiring Diagram
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The Acclaim Lighting AL Dimmer 1 HP is a single channel constant current LED dimmer for high power LEDs. It can be controlled by a DMX or analog (0-10V or 1-10V switchable) control signal. Dipswitches are used for setting DMX address or for manual dimming. Power inputs, fixture outputs, DMX (loop-through) and analog (loop-through) are available on screw terminals. LED output current default is 350 mA, which can be altered to 500 or 700 mA. Maximum output load is 6 Amps. The AL Dimmer 1 HP is the perfect companion for Acclaim Lighting high power single color LED products.
Model NumberDCC-311-QBAT
Product NameAL Dimmer 1 HP 350mA/500mA/700mA
n
12 24 m . 6
m
2 2
12
12
in in n n
3 0 00 700 m
imm 1
3 0 00 700 m n in
n in m .
3 126 24
102
AL Dimmer 3 HPSystem
Constant Current OutputLoad
Control OptionsAddressing DMXDMX ChannelsPower requirementsDMX InputDMX OutputListingOperating Temp.Storage Temp.HousingIP RatingDimensions
WeightIncludedNot Included
Constant Current
350mA / 700mA (6-pin Terminal)Max 3-LEDs/Channel @ 12 Vdc Max 6-LEDs/Channel @ 24 VdcDMX-512, Manual, Stand AloneDipswitch 312 ~ 24 VDC / 6A Max. (1 x 4-pin Terminal)3-pin Terminal3-pin TerminalCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP20115 (L) x 54 (W) x 23 (H) mm ( 4.5 x 2.1 x 0.9 in)150g ( 5.3 oz)IR Remote and IR Eye (Sensor)Din Rail Adapter (sold separately)
4mm
[2.1
in]
34m
m [1
.3in
]
11 mm [4. in]
4mm
[0.1
in]
mm [0.3in]
12 24
12 24
n
n
30m
700m
imm 3
↓
mm [3.3in]
24m
m [1
.0in
]
23m
m [0
.9in
]
109764321
n
1211
101mm [4.0in]
RGB Constant Current Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting AL Dimmer 3 HP is a 3-channel constant current LED dimmer for high power LEDs. It can be controlled with the supplied IR remote control, by DMX, or operate in slave mode, where the master AL Dimmer 3 HP can control up to 32 slave AL Dimmer 3 HPs. Dipswitches are there for setting DMX address or for controlling individual R, G and B values, enabling manual dimming for creating a palette of static colors as well. Power inputs, fixture outputs and DMX with loop-through are all available on screw terminals. LED output current default is 350 mA, which can be altered to 700 mA. Maximum output load is 6,5 Amps in total. The AL Dimmer 3 HP is the perfect companion for the Acclaim Lighting high power LED RGB products.
Model NumberDCC-311-SBAT
Product NameAL Dimmer 3 HP 350mA/700mA
AccessoriesIR Remote (including with purchase AL Dimmer 3 HP)IR Eye (sensor) (including with purchase AL Dimmer 3 HP)Din Rail Adapter (sold separately ( Model number: AC-TBA-00001 )
n
12 24 m . 6
m
in n n
3 0 700 m
2 6
12
12
imm 3
3 0 700 m n in
n in m .
9 12 1 24
103
AL Dimmer 3F HPSystem
Constant Current OutputLoad
Control OptionsAddressing DMXDMX ChannelsPower requirementsDMX InputDMX OutputListingOperating Temp.Storage Temp.HousingIP RatingDimensions
WeightIncludedNot Included
Constant Current
350mA / 700mA (6-pin Terminal)Max 3-LEDs/Channel @ 12 Vdc Max 6-LEDs/Channel @ 24 VdcDMX-512, Manual, Stand Alone, IR RemoteDipswitch 312 ~ 24 VDC / 6A Max. (1 x 4-pin Terminal)3-pin Terminal3-pin TerminalCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP20115 (L) x 54 (W) x 23 (H) mm ( 4.5 x 2.1 x 0.9 in)150g ( 5.3 oz)IR Remote and IR Eye (Sensor)Din Rail Adapter (sold separately)
4.0m
m [2
.1in
]33
.m
m [1
.3in
]
101.0mm [4.0in] 3.m
m [0
.1in
]
.0mm [0.3in]
12 24
12 24
109
76
43
21
n
1211
n
n
30m
700m
imm 3
n
10 6 4 2 0
10 6 4 2 0
10 6 4 2 0
↓
.0mm [3.3in]
24.3
mm
[1.0
in]
23.0
mm
[0.9
in]
11 .0mm [4. in]
RGB Constant Current Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting AL Dimmer 3F HP is a 3-channel constant current LED dimmer. Each channel can be controlled with the relevant fader, built into the unit. The AL Dimmer 3F HP can also be controlled by the supplied IR remote control, by DMX or it can operate in slave mode. In slave mode, the master AL Dimmer 3F HP can control up to 32 slave AL Dimmers 3F HP. Dipswitches are there for setting DMX address and for controlling individual R, G and B values, enabling manual dimming for creating a palette of static colors as well. Power inputs, fixture outputs and DMX with loop-through connections are available on screw terminals. LED output current default is 350 mA, which can be altered to 700 mA. Maximum output load is 6 Amps in total. The AL Dimmer 3F HP is a very versatile control tool for all Acclaim Lighting high power LED products.
Model NumberDCC-311-SBBT
Product NameAL Dimmer 3F HP (350mA/700mA)
AccessoriesIR Remote (including with purchase AL Dimmer 3F HP)IR Eye (including with purchase AL Dimmer 3F HP)Din Rail Adapter (sold separately ( Model number: AC-TBA-00001 )
n imm 3
3 0 700 m n in
n in m .
9 12 1 24
12 24 m . 6
m
in n n
3 0 700 m
2 6
12
12
104
AL Dimmer 4HPSystem
Constant Current OutputLoad
Control OptionsAddressing DMX DMX ChannelsPower requirementsDMX InputDMX OutputCertificationsOperating Temp.Storage Temp.HousingIngress Protection RatingWeightNot Included
Constant Current (8-Wire / 4 Channels)
350mA / 700mA (8-pin Terminal)Max 4 x 350mA (for 1W LED) 4 x 6 LEDs Max 4 x 700mA (for 3W LED) 4 x 6 LEDs DMX-512, Manual, Stand AloneDipswitch 412 ~ 24 V DC / 6A Max. (1 x 4-pin Terminal)3-pin Terminal3-pin TerminalCE0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP20150g ( 5.3 oz)Din Rail Adapter (sold separately)
4.0m
m [2
.1in
]
33.
mm
[1.3
in]
11 .0mm [4. in]
.0mm [0.3in]
12 24
12 24
30m
700m
imm 3
.0mm [3.3in]
24.3
mm
[1.0
in]
23.0
mm
[0.9
in]
109764321
n
1211
101.0mm [4.0in]
1
2
3
4
RGBW Constant Current Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
n
12 24 m . 6
in n n
3 0 700 m
2
12
12
imm 4
3 0 700 m n in
n in m .
24 1 3 0m 24 3 700m
The Acclaim Lighting AL Dimmer 4 HP is a 4-channel constant current LED dimmer for high power LEDs. It can be controlled by DMX, or operate in slave mode, where the master AL Dimmer 4 HP can control up to 32 slave AL Dimmer 4 HPs. Dipswitches are used for setting DMX start address or selecting Auto Mode where pattern, fade time and speed can be set. Power inputs, fixture outputs and DMX with loop-through are all available on screw terminals. LED output current default is 350 mA, which can be altered to 700 mA. The AL Dimmer 4 HP is the perfect companion for the Acclaim Lighting high power LED RGBW and RGBW products.
Model NumberDCC-311-SBCT
Product NameAL Dimmer 4 HP
105
AL Driver 8-RGBW 12VSystem
Control OptionsLoad
Addressing DMX Power RequirementDMX InputDMX OutputDMX ChannelsListingOperating Temp.Storage Temp.HousingDimensions
Weight
12 VDC / PWM dimmer (RGBW)
DMX-512, Stand AloneMax 150W connect to DriverMax 75W connect to 1 outputDipswitch 110 VAC (3.2A) / 240 VAC (1.6A)3-pin XLR3-pin XLRMin. 24 (8 x RGB), Max. 32 (8 x RGBW)CE and cETLus certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)Sheet metal with powder painting286 (L) x 191 (W) x 74 (H) mm (11.4 x 7.5 x 2.9 in)3,0kg (6.6 lbs)
2 .3mm [11in]
74.0
mm
[3i
n]
190.9mm [ in]
190.
9mm
[in
]
109764321
n
1211
6
24 .4mm [10in]
1
n
i 3
n
i
n
i 7
n
i
2
n
i 4
n
i 6
n
i
n
i
RGBW PWM Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting AL Driver 8-RGBW is a 12V PWM driver for Acclaim Lighting 12V LED fixtures and strip products. It features 3 pin DMX in and outputs and eight Phoenix screw output terminals. 12 dipswitches define the AL Driver‘s mode. A choice of DMX controlled or stand-alone operation can be selected. In stand-alone mode, fade time (0-100%), chasing speed (0,1-30 seconds) and RGB mix can be selected. Alternatively, one of 8 built-in programs may be selected. Output modes include white mode (single DMX channel), white + RGB spectrum mode (2 DMX channels), RGB mode (3 DMX channels) and RGBW mode (4 DMX channels).
Model NumberDPW-111-DAAE DPW-111-DAAU
Product NameAL Driver 8 RGBW 12V (VDE Plug 240Vac) AL Driver 8 RGBW 12V (UL Plug 110Vac)
n
3
12
12
220 240
i
m . 12 12 6 i
m . 6 72
106
AL Driver 8-RGBW 24VSystem
Control OptionsLoad
Addressing DMX Power RequirementDMX InputDMX OutputDMX ChannelsListingOperating Temp.Storage Temp.HousingDimensions
Weight
24 VDC / PWM dimmer (RGBW)
DMX-512, Stand AloneMax. 150W connect to DriverMax. 150W connect to 1 outputDipswitch 110 VAC (3.2A) / 240 VAC (1.6A)3-pin XLR3-pin XLRMin. 24 (8 x RGB), Max. 32 (8 x RGBW)CE and cETLus certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)Sheet metal with powder painting286 (L) x 191 (W) x 74 (H) mm (11.4 x 7.5 x 2.9 in)3,0kg (6.6 lbs)
2 .3mm [11in]
74.0
mm
[3i
n]
190.9mm [ in]
190.
9mm
[in
]
109764321
n
1211
6
24 .4mm [10in]
1
n
i 3
n
i
n
i 7
n
i
2
n
i 4
n
i 6
n
i
n
i
RGBW PWM Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting AL Driver 8-RGBW is a 24V PWM driver for Acclaim Lighting 24V LED fixtures and strip products. It features 3 pin DMX in and outputs and eight Phoenix screw output terminals. 12 dipswitches define the AL Driver‘s mode. A choice of DMX controlled or stand-alone operation can be selected. In stand-alone mode, fade time (0-100%), chasing speed (0,1-30 seconds) and RGB mix can be selected. Alternatively, one of 8 built-in programs may be selected. Output modes include white mode (single DMX channel), white + RGB spectrum mode (2 DMX channels), RGB mode (3 DMX channels) and RGBW mode (4 DMX channels).
Model NumberDPW-111-FAAE DPW-111-FAAU
Product NameAL Driver 8 RGBW 24V (VDE Plug 240Vac) AL Driver 8 RGBW 24V (UL Plug 110Vac)
i
m . 24 6 6
n
3
12
12
220 240 i
m . 6 144
107
AL Dimmer 1 ProSystem
Control OptionsAddressing DMX Power RequirementDMX ChannelsDMX InputDMX OutputAnalog InputListingOperating Temp.Storage Temp.HousingIP RatingDimensions
Weight
12 ~ 24 VDC / 2-Wire
DMX-512, Manual, 0-10VDipswitch 12 ~ 24 VDC / 6A Max.13-pin Terminal3-pin Terminal0-10V (2-pin Terminal)CE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP2090 (L) x 40 (W) x 20 (H) mm ( 3.5 x 1.6 x 0.8 in)50g (1.8 oz)
Single Color PWM Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
n
12 24 m . 6
2 2
12
12
2
0 10 n n
iin m . 6
imm 1
m . 6 n in
n in
70mm [2. in]
40m
m [
1.6i
n]
90mm [3. in]
20m
m [
0.in
]
0 10
12 24
12 24
n
m 6
10987654321
12 24
6
1
n
The Acclaim Lighting AL Dimmer 1 Pro is a single channel PWM LED dimmer. It can be controlled by DMX or an analog 0-10V control signal. Dipswit-ches are used for setting DMX address or for manual dimming. Power inputs, fixture outputs and DMX with loop-through are available on screw terminals. Maximum output load is 6 Amps. The AL Dimmer 1 Pro is the perfect companion for the Acclaim Lighting Flex ll HO and SO single color products, among other products.
Model NumberDPW-311-HBAT
Product NameAL Dimmer 1 Pro 6A
108
AL Dimmer 1 MultiSystem
Control OptionsAddressing DMXDMX ChannelsPower requirementsDMX InputDMX OutputAnalog InputAnalog ThruPWM Output to LEDsListingOperating Temp.Storage Temp.HousingIP RatingDimensions
Weight
6 ~ 24 VDC / 2-Wire PWM dimmer
DMX-512, Manual, 0-10V, 1-10VDipswitch 16 ~ 24 VDC / 5A Max. (1 x 2-pin Terminal)3-pin Terminal3-pin Terminal0-10V / 1-10V (2-pin Terminal)0-10V / 1-10V (2-pin Terminal)1 x 4 Pin terminalCE Certified, cETL Approved0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP2090 (L) x 40 (W) x 20 (H) mm ( 3.5 x 1.6 x 0.8 in)50g (1.8 oz)
70mm [2. in]
40m
m [1
.6in
]
90mm [3. in]
109764321
6 24
n
1211
n
0 10 1 10
0 10 1 10
6 24
m 6
20m
m [0
.in
]
6 24
Single Color PWM Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting AL Dimmer 1 Multi is a single channel PWM LED dimmer. It can be controlled by a DMX or analog (0-10V or 1-10V switchable) control signal. Dipswitches are used for setting DMX address or for manual dimming. Power inputs, fixture outputs, DMX (loop-through) and analog (loop-through) are available on screw terminals. Maximum output load is 6 Amps. The AL Dimmer 1 Multi is the perfect companion for the Acclaim Lighting Flex ll HO and SO single color products, among other products.
Model NumberDPW-311-JBAT
Product NameAL Dimmer 1 Multi
n
12 24 m . 6
2 2
12
12
imm 1 i
m . 6 24 6 n in
n in
0 10 1 10 n
iin m . 6
2
0 10 1 10
109
X-Dimmer 3 ProSystem
Control OptionsAddressing DMX DMX ChannelsPower requirementsDMX InputDMX OutputPWM Output to LEDsListingOperating Temp.Storage Temp.HousingIngress Protection RatingDimensions
Weight
6 ~ 24V DC 4-Wire PWM dimmer
DMX-512, Manual, Stand AloneDipswitch 36 ~ 24 V DC / 6A Max. (1 x 4-pin Terminal)3-pin Terminal3-pin Terminal1 x 4 Pin terminalCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP2090 (L) x 40 (W) x 20 (H) mm ( 3.5 x 1.6 x 0.8 in)50g (1.8 oz)
70mm [2. in]
40m
m [
1.6i
n]
90mm [3. in]
10987654321
n
20m
m [
0.in
]
n
12 24
6 m .
3
12 24
6
RGB PWM Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting X-Dimmer 3 Pro is a PWM LED dimmer which is able to control 3 separate channels. It can be controlled by DMX or operate in slave mode, where the master X-Dimmer 3 Pro can control up to 32 slave X-Dimmers 3 Pro. Dipswitches are there for setting DMX address or for controlling individual R, G and B values, enabling manual dimming for creating a palette of static colors as well. Power inputs, fixture outputs, DMX with loop-through and 0-10V connection are available on screw terminals. Maximum output load is 6 Amps in total. The X-Dimmer 3 Pro is the perfect companion for the Acclaim Lighting Flex LED WP RGB product, among other products.
Model NumberDPW-311-HBCT
Product NameX-Dimmer-3 Pro
2
12
n
12 24 m . 6
2
0 10 1 10
4
0 10 n n
i
m . 6
imm 3
m . 6 n in
n in
110
AL Dimmer 3FSystem
Control OptionsAddressing DMXDMX ChannelsPower requirementsDMX InputDMX OutputPWM Output to LEDsListingOperating Temp.Storage Temp.HousingIP RatingDimensionsWeightIncludedNot Included
12 ~ 24 VDC / 4-Wire PWM dimmer
DMX-512, Manual, Stand AloneDipswitch 312 ~ 24 VDC / 6A Max. (1 x 4-pin Terminal)3-pin Terminal3-pin Terminal1 x 4 Pin terminalCE Certified0 °C ~ +40 °C-20 °C ~ +70 °CPolyCarbonateIP20115 (L) x 54 (W) x 23 (H) mm150g ( 5.3 oz)IR Remote and IR Eye (Sensor)Din Rail Adapter (sold separately)
4.0m
m [2
.1in
]
33.
mm
[1.3
in]
101.0mm [4.0in] 3.m
m [0
.1in
]
.0mm [0.3in]
12 24
12 24
109
76
43
21
n
1211
n
6 m
12 24
11 .0mm [4. in]
imm 3
n
10 6 4 2 0
10 6 4 2 0
10 6 4 2 0
↓
.0mm [3.3in]
24.3
mm
[1.0
in]23
.0m
m [0
.9in
]
RGB PWM Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
imm 3
m . 6 n in
n in
n
12 24 m . 6
m
2 4
12
12
i
m . 6
The Acclaim Lighting AL Dimmer 3F is a PWM LED dimmer which is able to control 3 separate channels. Each channel can be controlled with the relevant fader, built into the unit. The AL Dimmer 3F can also be controlled by the supplied IR remote control, by DMX or it can operate in slave mode. In slave mode, the master AL Dimmer 3F can control up to 32 slave Al Dimmers 3F. Dipswitches are there for setting DMX address and for controlling individual R, G and B values, enabling manual dimming for creating a palette of static colors as well. Power inputs, fixture outputs and DMX with loop-through connections are available on screw terminals. Maximum output load is 6 Amps in total.
Model NumberDPW-311-HBDT
Product NameAL Dimmer 3F 12 ~ 24 Vdc / 6A Max.
AccessoriesIR Remote (including with purchase AL Dimmer 3F)IR Eye (sensor) (including with purchase AL Dimmer 3F)Din Rail Adapter (sold separately ( Model number: AC-TBA-00001 )
111
AL Dimmer 4FMSystem
Control OptionsAddressing DMX Power requirementsDMX OutputPWM Output to LEDsCertificationsOperating Temp.Storage Temp.HousingIngress Protection RatingWeightNot Included
12 ~ 24 V DC 5-Wire PWM dimmer (4-Channel)
ManualDipswitch 12 ~ 24 V DC / 8A Max. (1 x 4-pin Terminal)3-pin Terminal1 x 5 Pin terminalCE0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP20150gDin Rail Adapter (sold separately)
4.0m
m [2
.1in
]33
.m
m [1
.3in
]
101.0mm [4.0in]
.0mm [0.3in]
12 24
10 6 4 2 0
.0mm [3.3in]
24.3
mm
[1.0
in]
23.0
mm
[0.9
in] 11 .0mm [4. in]
n
10 6 4 2 0
10
0
12
344
RGBW PWM Dimmer
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
n i imm 4
n in n in 4
m . 12 24
m .
i
i
2
2 12
The Acclaim Lighting AL Dimmer 4FM is a PWM LED dimmer which is able to control 4 separate channels. 4 channels can be individually controlled with the relevant fader, while a master fader is present to control overall intensity. Connected to an external switch, the AL Dimmer 4FM’s outputs can be switched on and off. DMX and PWM output signals are present on terminal connectors. The AL Dimmer 4FM is a handy control tool for Acclaim Lighting RGBW or RGBA LED products. It can also be used for controlling up to 4 groups of white lighting fixtures.
Model NumberDPW-311-HBFT
Product NameAL Dimmer 4FM
112
X-Power TVSystem
Control OptionsMaster/Slave FunctionDMX ChannelsAddressing DMXPower requirementsDMX InputDMX OutputOutputLoad
ListingOperating Temp.Storage Temp.HousingIP RatingDimensions
Weight
24 VDC / 5-Wire
DMX-512, Manual, Stand AloneYesMin 3. (1 x RGB ) Max 24. (8 x RGB )XB-R1 Setup tool 110 VAC (3.2A) / 240 VAC (1.6A)3-pin XLR3-pin XLR8 pcs 5-pin TerminalMax 100 pcs X-Chip connect to DriverMax 50 pcs X-Chip connect on 1 outputCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F) Sheet metal with powder paintingIP20360 (L) x 180 (W) x 76 (H) mm(14.2 x 7.1x 3 in)1,85kg (4.1 lbs)
327mm [12.9 in]
7m
m [
3.0
in]
12m
m [
6.0
in]
1 2 3
1 2 3
1
2
2
1
3
3
X-Chip 100 & 300 Driver
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
Product NameX-Power TV (VDE Plug 240Vac) X-Power TV (UL Plug 110Vac)
Model NumberDXC-111-FAAEDXC-111-FAAU
The Acclaim Lighting X-Power TV is designed to control the X-Chip 100 and 300 Series LED PCBs. Special anti-flicker circuitry makes the unit suitable for TV studio applications. The X-Power TV is a wall mount unit featuring 8 outputs which are capable of driving up to 3 Amps each, equivalent to 50 X-Chip modules. A fully loaded the X-Power TV can control up to 100 X-Chip modules, allowing for beautiful colors and effects. X-Chip Driver TV can be controlled by DMX or it can run in manual or auto mode. There is also an auto/slave mode, where an X-Power TV, acting as master, can control up to 32 slaves. In master mode, auto and manual programs can be distributed to the slave units. In slave mode, 12 work modes are available, including RGB, patch and color/intensity modes. All output connections are made with terminal connectors. For addressing and programming, the X-Chip Driver TV needs to be connected to the XB-R1 set-up unit (sold separately).
n
i i
12
12
240 in n 12 in n
m . 100 i
m . 0 i n
n
220 240
113
X-Chip Driver TVSystem
Control OptionsMaster/Slave FunctionDMX ChannelsAddressing DMXPower requirementsDMX InputDMX OutputOutputLoad
ListingOperating Temp.HousingIP RatingDimensions
Weight
24 VDC / 5-Wire (Only for X-Chip 100 & 300)
DMX-512, Manual, Stand AloneYesMin 3. (1 x RGB ) Max 24. (8 x RGB )XB-R1 Setup tool24 VDC / 300W Max. (1 x 2-pin Terminal)3-pin Terminal3-pin Terminal8 pcs 5-pin TerminalMax. 200 pcs X-Chip connect to DriverMax. 50 pcs X-Chip connect on 1 outputCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)Sheet metal with powder paintingIP20147 (L) x 115 (W) x 40 (H) mm (5.8 x 4.5 x 1.6 in)500g (17.6 oz)
40.0
mm
[1.6
in]
11 .0mm [4. in]
11.0
mm
[4.
in]
100.
0mm
[3.9
in]
110.0mm [4.3in]
2.0mm [3.2in]
147.0mm [ . in]
X-Chip 100 & 300 Driver
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting X-Chip Driver TV is designed to control the X-Chip 100 and 300 Series LED PCBs. Special anti-flicker circuitry makes the unit suitable for TV studio applications. The X-Chip Driver TV is a wall mount unit featuring 8 outputs which are capable of driving up to 3 Amps each, equivalent to 50 X-Chip modules. A fully loaded the X-Chip Driver TV can control up to 200 X-Chip modules, allowing for beautiful colors and effects. X-Chip Driver TV can be controlled by DMX or it can run in manual or auto mode. There is also an auto/slave mode, where an X-Chip Driver TV, acting as master, can control up to 32 slaves. In master mode, auto and manual programs can be distributed to the slave units. In auto mode, 10 preset programs are available, in manual mode individual color intensity and fade times for red, green and blue can be set. Group Output modes include single to 24 individual channel output, while Output Load mode defines single, color, color/brightness or RGB control. All connections are made with terminal connector. For addressing and programming, the X-Chip Driver TV needs to be connected to the XB-R1 set-up unit (sold separately).
Model NumberDXC-311-FBAT
Product NameX-Chip Driver TV
n im . 24 24
nn 3m . 0 3
400 24 300 m .
i i
2
12
12
114
Pixel Driver MiniSystem
Control OptionsLoadAddressing DMXPower requirementsDMX InputDMX OutputOutput to LEDListingOperating Temp.Storage Temp.HousingIP RatingDimensions
WeightIncludedNot Included
Pixel Video Driver 5v
DMX-512, DMX-1000Pixel Stick 5/10 (max 60 pixels) Automatic5 Vdc, 5A Max.(1 x 2-pin Terminal)3-pin Terminal3-pin Terminal (auto addressing)6-pin TerminalCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)PolyCarbonateIP2090 (L) x 40 (W) x 20 (H) mm ( 3.5 x 1.6 x 0.8 in)150g (5.3 oz)First cable Pixel Stick 5/10First cable Pixel Tube 15/30 (sold separately)
90mm [3. in]
20m
m [
0. in
]
43m
m [
1.7
in]
For Pixel Stick 5/10
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Accaim Lighting Pixel Driver Mini is a small and convenient driver for our AL Pixel Stick 5/10. It features automatic DMX addressing. Pixel value is adjustable from 5 to 100, red, green and blue can be controlled separately. The Mini Pixel Driver is compatible with DMX512 and DMX 1000K pro-tocol. In DMX 512 mode, 170 pixels can be controlled while in DMX 1000K mode 600 pixels can be controlled. One AL Pixel Driver Mini can control a maximum of 50 pixels for both AL Pixel Stick 5/10 or AL Pixel Tube 15/30. DMX connections are made with 3 pin terminal connector while a 6 pin terminal connects to AL Pixel Stick or AL Pixel Tube. The Pixel Driver Mini comes with a first cable for AL Pixel Stick. Power requirement is 5V DC, power supply sold separately.
Model NumberDPL-311-ABBT Product Name
Pixel Driver MiniAccessoriesFirst cable Pixel Stick 5/10 (including with purchase Pixel Driver Mini)
n
2
6
12
12
m .
i i 10
i i mini
m . 60 im .
(Auto DMX addressing)
115
AL Pixel 1 DriverSystem
Control OptionsLoad
Addressing DMXPower requirementsDMX InputDMX OutputOutput to LEDListingOperating Temp.Storage Temp.HousingIP RatingDimensions
Weight
Pixel Video Driver 9v
DMX-512, DMX-10001 pc AL Pixel string with max 100 pixels or2 pcs AL Pixel string with max 50 pixelsAutomatic110 Vac (3.2A) / 240 Vac (1.6A)3-pin Term. and 3-pin XLR3-pin Term. and 3-pin XLR (auto addressing)2 x 4-pin TerminalCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)Sheet metal with powder paintingIP20327,6 (L) x 143,6 (W) x 70 (H) mm (13 x 5.6 x 2.8 in)2,0kg (4.4 lbs)
1 .0
32 mm [12.9in]
70m
m [
2.in
]
14m
m [
.7in
]
1
2
30 mm [12.1in]
79m
m [
3.1i
n]
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
AL Pixel 1 Driver is a simple driver, specially designed to drive our LED product AL-Pixel. It features automatic DMX512 addressing and an LED display for indicating current function and parameter. The brightness of red, green and blue at each pixel can be controlled separately. An EEPROM is used to memorize the current function and parameters. AL-Pixel-Driver is easy to operate with high reliability. One AL Pixel 1 Driver can control one string of 100 pixels or two strings of 50 AL pixels. DMX in- and outputs are on XLR3 and terminal connector, outputs to AL pixels are on terminal connectors.
Model NumberDPL-111-CAAE
Product NameAL Pixel 1 Driver
n
i 1
4
12
12
220 240
i 1 i
m . 9 12 2
m . 1 100 n
2 0 n
For AL Pixel 1 only
(Auto DMX addressing)
116
AL Pixel 6 DriverSystem
Control OptionsLoad
Addressing DMX Power RequirementDMX InputDMX OutputOutput to LED ListingOperating Temp.Storage Temp.HousingIngress Protection RatingWeight
Pixel Video Driver 24v
DMX-512, DMX-10001 pc AL Pixel string with max 100 pixels or2 pcs AL Pixel string with max 50 pixelsAutomatic110 V AC (3.2A) / 240 V AC (1.6A)3-pin Term. and 3-pin XLR3-pin Term. and 3-pin XLR (auto addressing)2 x 4-pin TerminalCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)Sheet metal with powder paintingIP202,0kg (4.4 lbs)
1 .0
32 mm [12.9in]
70m
m [
2.in
]
14m
m [
.7in
]
1
2
30 mm [12.1in]
79m
m [
3.1i
n]
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
AL Pixel 6 Driver is a simple driver, specially designed to drive our LED product AL-Pixel. It features automatic DMX512 addressing and an LED display for indicating current function and parameter. The brightness of red, green and blue at each pixel can be controlled separately. An EEPROM is used to memorize the current function and parameters. AL-Pixel-Driver is easy to operate with high reliability. One AL Pixel 6 Driver can control one string of 100 pixels or two strings of 50 AL pixels. DMX in- and outputs are on XLR3 and terminal connector, outputs to AL pixels are on terminal connectors.
Model NumberDPI-111-FAAE
Product NameAL Pixel 6 Driver
n
i 6
4
12
12
220 240
i 6 i
m . 24 62
m . 1 100 n
2 0 n
(Auto DMX addressing)
For AL Pixel 6 only
117
Chesapeake Energy Building, Fort Worth, USA
Power SuppliesPower SuppliesPower SuppliesPower SuppliesPower Supplies118
ACCLAIMLIGHTINGChesapeake Energy Building, Fort Worth, USA
119
CLG 24V DC PSU Series
Features
• AC input range selectable by switch• Protections: Short circuit / Over load / Over Voltage• Cooling by free air convection• 100% full load burn-in test• Fixed switching frequency at 25KHz
Power Supplies
www.acclaimlighting.eu
Description
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The CLG Series is a group of Class 2, wet location Power Supplies. They can be used to power almost any of the products in the Acclaim Lighting line when a lower profile design or IP67 rating is required.
S-150 24V PSUPower Supplies
Description
DescriptionThe S-150 Series is a group of component power supplies.They can be used to power almost any of the products in the Acclaim Lighting line when a lower profile design is required.
Description
Model Number
Model NumberPSU-242-CFANPSU-242-CHANPSU-242-CLAN
Product NameCLG-60-24 IP-67 (60W / 24V)CLG-100-24 IP-67 (96W / 24V)CLG-150-24 IP-67 (150W / 24V)
Model Number
Model NumberPSU-243-ELAN
Product NameS-150W 24V
System
LoadVoltage rangePower RequirementListingOperating Temp.Storage Temp.IP ratingDimensions (100, 150W)Dimensions (60W)Weight (100, 150W)Weight (60W)
PSU
Max 60, 96, 150W90-295 VAC multi range input110 V AC (3.2A) / 240 V AC (1.6A)CE and cETLus certified-10 °C ~ +60 °C (14 °F ~ + 140 °F)-20 °C ~ +85 °C (-4 °F ~ + 185 °F)IP 67222.2 (L) x68 (W) x 38.8 (H) mm (8.7 x 2.6 x1.5 in)195.6 (L) x61.5 (W) x 38.8 (H) mm (7.7 x 2.4 x1.5 in)1kg (2.2 lbs)0.8kg (1.75 lbs)
System
LoadVoltage rangePower RequirementListingOperating Temp.Storage Temp.IP ratingDimensionsWeight
PSU
Max 150W 88-132VAC / 176-264VAC (by switch)110 V AC (3.2A) / 240 V AC (1.6A)CE and cETLus certified-10 °C ~ +60 °C (14 °F ~ + 140 °F)-20 °C ~ +85 °C (-4 °F ~ + 185 °F)IP 00199 (L) x110 (W) x 50 (H) mm (7.8 x 4.3 x1.9 in)0.8kg (1.75 lbs)
120
CLG 12V DC PSU Series
Features
• AC input range selectable by switch• Protections: Short circuit / Over load / Over Voltage• Cooling by free air convection• 100% full load burn-in test• Fixed switching frequency at 25KHz
Power Supplies
www.acclaimlighting.eu
Description
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The CLG Series is a group of Class 2, wet location Power Supplies. They can be used to power almost any of the products in the Acclaim Lighting line when a lower profile design or IP67 rating is required.
S-150 12V PSUPower Supplies
Description
DescriptionThe S-150 Series is a group of component power supplies.They can be used to power almost any of the products in the Acclaim Lighting line when a lower profile design is required.
Description
Model Number
Model NumberPSU-122-CFANPSU-122-CHANPSU-122-CLAN
Product NameCLG-60-12 IP-67 (60W / 12V)CLG-100-12 IP-67 (96W / 12V)CLG-150-12 IP-67 (132W / 12V)
Model Number
Model NumberPSU-123-ELAN
Product NameS-150W 12V
System
LoadVoltage rangePower RequirementListingOperating Temp.Storage Temp.IP ratingDimensions (100, 150W)Dimensions (60W)Weight (100, 150W)Weight (60W)
PSU
Max 60, 96, 132W90-295 VAC multi range input110 V AC (3.2A) / 240 V AC (1.6A)CE and cETLus certified-10 °C ~ +60 °C (14 °F ~ + 140 °F)-20 °C ~ +85 °C (-4 °F ~ + 185 °F)IP 67222.2 (L) x68 (W) x 38.8 (H) mm (8.7 x 2.6 x1.5 in)195.6 (L) x61.5 (W) x 38.8 (H) mm (7.7 x 2.4 x1.5 in)1kg (2.2 lbs)0.8kg (1.75 lbs)
System
LoadVoltage rangePower RequirementListingOperating Temp.Storage Temp.IP ratingDimensionsWeight
PSU
Max 150W 88-132VAC / 176-264VAC (by switch)110 V AC (3.2A) / 240 V AC (1.6A)CE and cETLus certified-10 °C ~ +60 °C (14 °F ~ + 140 °F)-20 °C ~ +85 °C (-4 °F ~ + 185 °F)IP 00199 (L) x110 (W) x 50 (H) mm (7.8 x 4.3 x1.9 in)0.8kg (1.75 lbs)
121
X-PD-150 IISystem
LoadVoltage rangePower RequirementDMX InputDMX OutputListingOperating Temp.Storage Temp.HousingDimensions
Weight
Power Supplies
www.acclaimlighting.eu
Description
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The X-PD-150 II is a 150w 24v power supply unit designed to combine power and data to it‘s 5 Pin weatherproof connector. With it‘s three mirrored outputs and linkable power, you have plenty of options when powering up the Color Ray AL-Tube Pro, and more.
Description
24Vdc + DMX
Max 150W 88-132VAC / 176-264VAC110 V AC (3.2A) / 240 V AC (1.6A)3-pin XLR3-pin XLRCE and cETLus certified-10 °C ~ +60 °C (14 °F ~ + 140 °F)-20 °C ~ +85 °C (-4 °F ~ + 185 °F)Sheet metal with powder painting297.5 (L) x154 (W) x 75.2 (H) mm (11.7 x 6.1 x 3 in)2.4kg (5.3 lbs)
Model number
Model NumberPSU-241-BLAEPSU-241-BLAU
Product nameX-PD 150 ll (240Vac VDE Plug)X-PD 150 ll (100Vac UL Plug)
X-PD-150 IISystem
LoadVoltage rangePower RequirementDMX InputDMX OutputListingOperating Temp.Storage Temp.HousingDimensionsWeight
Power Supplies
www.acclaimlighting.eu
Description
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The X-PD-150 II is a 150w 24v power supply unit designed to combine power and data to it‘s 5 Pin weatherproof connector. With it‘s three mirrored outputs and linkable power, you have plenty of options when powering up the Color Ray AL-Tube Pro, and more.
Description
PSU
Max 150W 88-132VAC / 176-264VAC110 V AC (3.2A) / 240 V AC (1.6A)3-pin XLR3-pin XLRCE and cETLus certified-10 °C ~ +60 °C (14 °F ~ + 140 °F)-20 °C ~ +85 °C (-4 °F ~ + 185 °F)Sheet metal with powder painting297.5 (L) x154 (W) x 75.2 (H) mm (11.7 x 6.1 x 3 in)2.4kg (5.3 lbs)
Model number
Model NumberPSU-241-BLAEPSU-241-BLAU
Product nameX-PD 150 ll (VDE Plug)X-PD 150 ll (UL Plug)
16 n n
1 2 3
297. mm [11.7in]
14.
0mm
[6.1
in]
260.9mm [10.3in]
2 1.0mm [11.1in]
90.0
mm
[3.
in]
7.2
mm
[3.0
in]
Dimensions
15 4
3214 5
23
1 : Ground ( shield )2 : Data - ( white )3 : Data + ( red )4 : GND ( black )5 : +24V DC ( white )
male 5 pin plug female 5 pin plug
m
m
in 67 n 1 2 3 10 1 2 m
3.3 6.6 9. 16. 32. 49.2 2.
Dimensions
15 4
3214 5
23
1 : Ground ( shield )2 : Data - ( white )3 : Data + ( red )4 : GND ( black )5 : +24V DC ( white )
male 5 pin plug female 5 pin plug
m
m
in 67 n 1 2 3 10 1 2 m
3.3 6.6 9. 16. 32. 49.2 2.
Link Cable
122
123
ControllersControllersControllersControllersControllers
Ocean Financial Centre, Singapore
124
ACCLAIMLIGHTINGOcean Financial Centre, Singapore
125
ART SSCSystem
Power InputPower consumptionDMX outputDMX inputArtnetOSCCuesRecorder
DimensionsListingIngress Protection Rating
ART SSC solid state DMX control (VDE)
Power Input 9-12V DC, PoE Class 1500 mA 2 x DMX-512 opto-isolated Output1 x DMX-512 opto-isolated Input Art-Net Output and Input OSC Output and InputOn-board lighting controller with 256 cuesDMX recorder with 16 tracks (Only Universe 1 with max 512 channels) / Art-Net recorder with 16 tracks (Universe 1 and 2 total 1024 channels)170 (L) x 100 (W) x 38 (H) mmCE CertifiedIP20
Controllers
www.acclaimlighting.eu
Description
Lighting Console
aTouchDMX Recorder
MonitorsShow Control
MIDIProtocol conversions
GPIScheduling
DIN-rail readyTime-Code
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
ART SSCThe Art SSC is a lighting controller for permanent installations. The device is completely solid-state, with no moving parts; it is an extremely secure and low-maintenance installation control solution that has only a minimal power consumption. All operating and programming is done through its dynamic web 2.0 interface.IDEAL FOR : permanent installations, architectural lighting, art installations, retail, bars, clubs, restaurants, exhibitions, interactive media, museums, outdoor lighting and theme parks.Basic concept of ART SSC is that any cue, DMX/Art-Net recording or scene setting can be triggered by either internal or external triggers. Examples of external triggers are a DMX input signal, contact closure or UDP or OSC messages. Internal (unattended) triggers can be generated by the built-in Real Time Clock using day/date schedule or daily sunset/sunrise.
Connected to a browser, the ART SSC unfolds itself into a 1024 channel lighting controller, complete with an industry-standard command-line interface for fast programming. It features 256 scenes with programmable fade and hold times.
For the ultimate stand-alone playback, the ART SSC is com-patible with the aTouch software. aTouch is a cross-platform (Windows, Mac & Linux) touch screen user-interface. In the ART SSC any combination of buttons and faders can be programmed, that will be available to the operators using aTouch.
The ART SSC features a DMX and Art-Net recorder with a capacity for storing 16 individual tracks. When using DMX input each track has 512 channels, when using Art-Net in-put each track has 1024 channels. Tracks are compressed for maximum duration. Multiple tracks can be played back, each with individual master levels.
Intuitive monitor screens for analysing incoming and outgo-ing DMX, Art-Net, MIDI and OSC data. Two DMX512 outputs and one DMX input, all optically isolated. Ethernet rugged Ethercon connection with support for HTML, Art-Net, OSC and proprietary protocols.
With lighting projects becoming more complex every day, the ART SSC features powerful Show Control logic for ad-vanced system integration. The Show Control editor ena-bles you to program triggers and actions based on events from scheduled dates or times, time code, contact closu-res or any other incoming signal.
MIDI input, through and out ports. Incoming MIDI messages can be used to trigger any function within the ART SSC.The Show Control editor also allows for powerful protocol
conversions between any physical port, like DMX or MIDI and any Ethernet based protocol like Art-Net or OSC.
The GPI port features 4 dry contact closures, which can trig-ger any event within the ART SSC. The number of contact closures is expandable by connecting to the ART SSC‘s ART IO module.
Features a battery backed-up Real Time Clock that can trigger events on date, time, weekdays and sunrise or sun-set. Daylight savings can be switched on and off and an offset can be applied to sunrise/sunset triggers as well.
The enclosure is prepared for DIN-rail mounting with an op-tional adapter.Trigger events or synchronize playback by Time-Code. The
ART SSC can also act as Time-Code master or convert bet-ween SMPTE and MTC.
OSCThe ART SSC can send and receive OSC messages. By using TouchOSC, a third-party app, you can design your own touch-screen user interfaces for mobile devices.
iPhone not included
126
ART IOSystem
Power inputInputsOutputsDMXDMX portArtnetOSCShow control functionDimensionsListingIngress Protection RatingaTouch compatible
ART IO input/output interface module
Power-over-Ethernet, 9-12V DC~500mA8, either analogue or digital8, relay switched, 3 Amp. each1 universe/512 channelsOpto-isolated, configurable as in- or outputArt-net output and inputOSC output and inputConnects any input to any output170 (L) x 100 (W) x 38 (H) mm CE certifiedIP20
Free of Charge software for Windows or Mac OS
Controllers
www.acclaimlighting.eu
Description
Show Control
Protocol conversions
DIN-rail ready
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
ART IOThe ART IO is an expansion module in the ART SSC product family of solid-state lighting controllers. It offers interfacing to digital and analogue inputs and digital outputs and supports various protocols like DMX, RS-232, OSC, UDP and Art-Net.The ART IO features 8 inputs that can be individually configured as digital or analogue input. Set as digital input, it allows for an easy connection with for example physical switches and sensors. When set to analogue, it supports 0-10V and 1-10V inputs; ideal for connecting to household dimmers. The 8 outputs on the ART IO are relay-switched and can handle 1 Amp. The digital outputs can be used to switched various other devices like A/V equipment, blinds or heavy-duty relays. Additionally, the ART IO is fitted with a DMX-512 port that can be configured as input or output, and a bi-directional RS-232 port. Through its network port, the ART IO also supports OSC, UDP and Art-Net protocols that can be used for triggering and conversion. The ART IO comes with its own power supply, but can be powered over Ethernet as well, using Class I PoE switches.The compact and versatile ART IO is the ideal expansion for the ART SSC in projects that demand more IO. Furthermore, ART IO is equally well suited for standalone IO interfacing or working together with any third-party show control system.
With lighting projects becoming more complex eve-ry day, the ART SSC features powerful Show Control logic for advanced system integration. The Show Control editor enables you to program triggers and actions based on events from scheduled dates or times, time code, contact closures or any other incoming signal.
The Show Control editor also allows for powerful protocol conversions between any physical port, like DMX or MIDI and any Ethernet based protocol like Art-Net or OSC.
The enclosure is prepared for DIN-rail mounting with an optional adapter.
iPad not included
Projects
Power-over-EthernetThe ART IO is Power-over-Ethernet compliant. Although supplied with a separate power supply, the ART IO can operate without this power supply when a PoE enabled network switch in integrated in the network. PoE capability facilitates easy integration in the network environment.
PoE
aTouchFor the ultimate stand-alone playback, the ART SSC is compatible with the aTouch software. aTouch is a cross-platform (Windows, Mac & Linux) touch screen user-in-terface. In the ART SSC any combination of buttons and faders can be programmed, that will be available to the operators using aTouch.
RS-232ART IO features a bi-directional RS-232 port which allows for easy integration with computer periphery or whole home automation systems like AMX or Crestron.RS232
GPIFeatures 8 GPI contacts, individually switchable from ana-logue to digital. Set to analogue, these accept 0-10V and can be calibrated, set to digital these accept traditional switches and sensors.
127
ART B6System
Power inputSupportsDMX outputCuesDimensionsListingIP rating
ART B6 6-button panel/stand-alone DMX control (VDE)
Power-over-Ethernet onlyDMX, OSC, UDP, Art-Net1x DMX-512 universe6 cue lists/zones, 768 cues128 (L) x 85 (W) x 34 (D) mmCE certifiedIP20
Controllers
www.acclaimlighting.eu
Description
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
ART B6 The ART B6 is a wall-mount button panel with 6 push-buttons. It can remote control any function within the ART SSC. The buttons are back-lit and can provide visual feed-back, for example, to indicate the selected cue or active show.Multiple Art B6s can be networked together. The Art B6 supports various open protocols like OSC, UDP and Art-Net. This allows it to be integrated with other 3rd party net-workbased systems as well, e.g. audio, video or show control systems.For small architectural projects, the Art B6 contains an inbuilt lighting controller that is capable of programming 32 fixtures and a maximum of 768 cues. The lighting can be divided into 6 individually controlled zones. This stand-alone controller even features an FX generator for e!ects like sinus, rainbow, twinkle, random strobe, etc. All programming is done via the web-interface, no additional client software is required.
Wall-MountFits European and North American gang boxes. Easy to wall-mount, even when no gang box is available.
Stand-Alone ControllerControl small architechtural installations stand-alone with the in-built lighting controller for 6 zones, including FX-Ge-nerator.
Controllers
Open ProtocolsSupports UDP, OSC, Art-Net and DMX protocols to commu-nicate with any other network-based device or software.
6 Push-ButtonsThe Buttons are backlit by white LEDs. It comes with a collection of labels, ranging from numbers, icons to colors.
System Schematic Example
ART SSCART IOPoE Switch
iPhoneArt B6iPad Mac OS / Windows Computer
Lighting Fixtures
Sensors & Switches
GPIO
DMX
Lighting Fixtures
DMX
Ethernet Ethernet
EthernetEthernet
Sensors & Switches
GPI
128
Emulation ProSystem
Cross platformHardware platformControlPhysical interfacesvia ART SSC/ART IONetwork interfacesCompatible with
Advanced scalable lighting control software
Windows, Mac OS & Ubuntu LinuxART SSC, ART IO, ART B6Ethernet connected
DMX, GPI, GPO, MIDI, RS232, SMPTE, Ethernet OSC, UDP, IP, Art-NetaTouch, TouchOSC, third party MIDI devices
Lighting Control Software
www.acclaimlighting.eu
Description
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Emulation ProEmulation Pro is a free download, available for Windows, Mac & Linux. It can be installed on multiple computers; the one connected to the ART SSC hardware becomes ‘live’, also enabling all hardware interfaces like general purpose input- and output ports, SMPTE time code and DMX in and out.
The Emulation Pro user interface is designed with touch screens in mind. Speedy programming of lighting cues and matrixes is possible using the freely programmable, direct access group and palette buttons. A TouchOSC template is available to mimic all functions of the software on an iOS device - a fully functional Emulation Pro remote control!
Emulation Pro features an extensive matrix pixel mapper for creating beautiful matrix effects. Some examples of effects that come with the software are twinkle, sinus, confetti, vortex, rainbow and text generator. These effects can be modified as well, changing parameters like density, shape, speed, etc. Once created, the software can calculate a seamless loop that can be automatically spanned across multiple ART SSCs. When copied to the ART SSCs, one can remove the computer with Emula-tion Pro, leaving the network with ART SSCs connected on site, thus facilitating unattended playback of complex matrix patterns. An Emulation Pro system is an excellent solution for media façades, shopping malls and other architectural projects.
Emulation Pro can be tightly integrated in other media systems as well. Using a choice of time code sources, events can be synchronized with lighting cues. UDP mes-sages sent over the network can be used to synchronize lighting with media players and video content. The software also includes a powerful time line editor, as an alternative to the industry standard cuelist system. In fact any part of the Emulation Pro user interface can be activated by external triggers.
Cross Platform aTouch
Monitors
MIDI
Time-Code
Being cross-platform, Emulation Pro can be installed on Windows, Mac or Ubuntu Linux computers. The software license allows you to install this application on as many computers as you like. The one computer linked to the hardware interface becomes your `live‘ system.
Emulation Pro is compatible with aTouch, an external pro-gram that runs on Windows, Mac OS and Linux. It features buttons and faders to trigger the software, taking away the control part from the programming of Emulation Pro. aTouch is developed with touch screens in mind, password protected, and can be set to start up upon switching on the computer.
Emulation Pro features intuitive monitor screens for analy-sing incoming and outgoing DMX, Art-Net, MIDI and OSC data.
Multiple MIDI control surfaces can be connected to enhan-ce the GUI of Emulation Pro. Adding MIDI controllers offers the tactile feel of knobs and sliders. Many brands and mo-dels are supported.
Apart from the industry standard cue list system, Emulation Pro features a timeline editor for programming accurate light shows. It can be synchronized by various time code protocols, like MIDI, OSC and SMPTE.
OSCEmulation Pro is compatible with OSC. Using the TouchOSC editor (available from www.hexler.net) and the TouchOSC app (available from the Apple App Store) one can create a unique user interface to control Emulation Pro, especially tailored to the customer‘s needs. A fully functional Tou-chOSC template for Emulation Pro‘s GUI , including feed-back, is available on request.
ART SSC Programming Tool
Scalability
The ART SSC has many stand-alone features that can be accessed by its web-interface. Alternatively, you can also use Emulation Pro to program the internal memories of the ART SSC. programming the ART SSCs by using Emulation Pro is particularly time-saving in a multiple-ART SSC setup.
Emulation Pro is a scalable system. Starting from a single ART SSC you can expand up to 8 units, several ART IOs and even ART B6 control panels. Over 8,000 DMX channels can be controlled with a single system, comprising Emulation Pro and 8 ART SSCs.
Lighting ConsoleConnected to a browser, the ART SSC unfolds itself into a 1024 channel lighting controller, complete with an industry-standard command-line interface for fast programming. It features 256 scenes with programmable fade and hold times.
Protocol conversionsThe Show Control editor also allows for powerful protocol conversions between any physical port, like DMX or MIDI and any Ethernet based protocol like Art-Net or OSC.
Matrix Effects
Macbook not included
129
ART 4
6mm [3.4 in]
1m
m [
0.6
in]
6mm
[3.
4 in
]
in
1 2 3 4
RGB Touch Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
4
4 . 3 nn
i 12 3 nn 26
12 24 m . 6
i imm i
2 12
i n in
n in
4
4m . 32 ni in
4 in
The ART 4 is a wall-mount, stand-alone lighting controller featuring a touch panel with controls for brightness, saturation, hue and program. The in-ternal memory contains 10 presets, of which 4 can be programmed on touch buttons 1-4. Alternatively, manually created scenes can be stored instead. An LED indicator mimics the current output. Maximum 32 pcs ART 4 controllers can be linked for multi-device control. This Link functionality provides a way to duplicate and synchronize multiple control panels in one lighting system. The ART 4 features both a DMX output and a direct RGB PWM output, each PWM channel capable of driving 2A max. PWM output power voltage is either 12V or 24V, depending on the power supply connected. Eg. when using a 12V power supply, max. total load at PWM outputs is 72 Watts@12V. When using a 24V power supply, max. total load is 144 Watts@24V. When using the ART 4‘s DMX output without connecting fixtures to the PWM outputs, the ART 4 needs to be powered by a separate power supply (not included). The ART 4 can be used for small lighting configurations, for example in bars, hotel rooms and residential applications.
System
Power RequirementOutputDMX OutputDMX ChannelsPWM Output + DC inputPWM ChannelsLink outputLink inputPresets
Operation TemperatureStorage TemperatureHousingAvailable colorsDimensionsWeightNot including
DMX + PWM
DC 12-24V (terminal connector) DMX 512, PWM and Link4-pin terminal connector3 channels repeated till 512 channels.6-pin terminal connector3 PWM channels, 2A per channel, 6A in total 4-pin terminal connector4-pin terminal connector4 programmable colors +4 preprogrammed or 4 programmable scenes0 °C ~ +40 °C (32 °F ~ + 104 °F) 0 °C ~ +70 °C (32 °F ~ + 158 °F) Polycarbonate White and Black, (Gray optional)86 x 86 x 15.5mm (3.39 x3.39 x 0.6 in)100 gr. (3.38 oz)Power Supply
Model NumberDMX-ART-04AEDMX-ART-04BE
Product NameArt 4E (EU) Black HouseArt 4E (EU) White House
EU Version
130
ART 9
169mm [6.6 in]
1m
m [
0.6
in]
4mm
[3.
3 in
]
i n
1 2 3
4 6
7 9
RGB Touch Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The ART 9 is a wall-mount, stand-alone lighting controller featuring a touch panel with controls for brightness, saturation, hue and program. The inter-nal memory contains 10 presets, of which 9 can be programmed on touch buttons 1-9. Alternatively, manually created scenes with variable fade time can be stored instead. An LED indicator mimics the current output. Maximum 32 pcs ART 9 controllers can be linked for multi-device control. This Link functionality provides a way to duplicate and synchronize multiple control panels in one lighting system. The ART 9 features both a DMX output and a direct RGB PWM output, each PWM channel capable of driving 2A max. PWM output power voltage is either 12V or 24V, depending on the power supply connected. Eg. when using a 12V power supply, max. total load at PWM outputs is 72 Watts@12V. When using a 24V power supply, max. total load is 144 Watts@24V. When using the ART 9‘s DMX output without connecting fixtures to the PWM outputs, the ART 9 needs to be powered by a separate power supply (not included).The ART 9 can be used for lighting configurations in bars, restaurants, hotel rooms and conference rooms.
Model NumberDMX-ART-09AE
Product NameArt 9E (EU) Black House
System
Power RequirementOutputDMX OutputDMX ChannelsPWM Output + DC inputPWM ChannelsLink outputLink inputPresets
Operation TemperatureStorage TemperatureHousingAvailable colorsDimensionsWeightNot including
DMX + PWM
DC 12-24V (terminal connector)DMX 512, PWM and Link4-pin terminal connector3 channels repeated till 512 channels.6-pin terminal connector3 PWM channels, 2A per channel, 6A in total4-pin terminal connector4-pin terminal connector9 programmable colors +9 preprogrammed or 9 programmable scenes0 °C ~ +40 °C (32 °F ~ + 104 °F) 0 °C ~ +70 °C (32 °F ~ + 158 °F) PolycarbonateBlack, (White and Gray optional)170 x 86 x 15.5mm (6.69 x3.39 x 0.6 in)200 gr. (6.76 oz.)Power Supply
12 24 m . 6
i imm i
2 12
i n in
n in
4
9m . 32 ni in
4 in
9
9 . 3 nn
i 12 3 nn 26
EU Version
131
ART 16System
Power Requirement Connection ART-16OutputInputDMX ChannelsDMX inputDMX OutputDMX start address PresetsSoftwareOperation TemperatureStorage TemperatureHousingAvailable colorsDimensions Weight Including
DMX-512
AC 240VCat5 Cable Power 12VDC+DMX In+DMX OutDMX 512, Power 240V ACDMX 512, Power 240V AC512 channels3-pin terminal connector3-pin terminal connectorYes16 fully programmable presetsPixel Mapping System, ART-16 software0 °C ~ +40 °C (32 °F ~ + 104 °F)0 °C ~ +70 °C (32 °F ~ + 158 °F)PolycarbonateBlack, (White and Gray optional)170 x 86 x 15.5mm (6.69 x3.39 x 0.6 in)200 gr. (6.76 oz.)IR remote, Junction BOX 1 and CAT5 cable
169mm [6.6 in]
1m
m [
0.6
in]
4mm
[3.
3 in
]1 2 3 4
6 7
1
9 16
26m
m [
1.0
in]
RGB Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The ART 16 is a wall-mount, stand-alone DMX lighting controller consisting of a wall mount control panel, an infra red remote control and a power/data supply unit for mains- and DMX in- and output and RJ45 terminal. The control panel connects to the power/data supply using the supplied RJ45 cable. The touch control panel is equipped with controls for brightness, saturation, hue, program and 16 shows or 200 files (up to 128 MB in total). 16 shows are built-in, allowing for the ART 16 to control and trigger each show separately. 170 individual RGB fixtures (in DMX512 mode) or 600 individual fixtures (in DMX1000 mode) can be controlled, for example in a small matrix configuration. DMX playback speed can be adjusted. The ART 16 also features a built-in real time clock for recalling shows on time. All functions can be controlled via the supplied IR remote control as well. The ART 16 comes with PC software (via download) for pixel mapping, configuring and programming fixtures in your own shows. In addition, Flash files (.swf format) can be converted and played back. The ART 16 can operate on external DMX triggers, triggers from the internal real-time clock or in manual mode and is a cost effective and versatile solution for small clubs, retail facades, reception areas, information desks etc.
Model NumberDMX-ART-16AE
Product NameArt 16E (EU) Black House
AccessoriesIR Remote (including with purchase Art 16 )Junction box 1 (240Vac) (including with purchase Art 16 )RJ45 Cat-5 Link cable 5 meter (including with purchase Art 16 )
iimm i
12
240 n
240
1616
m
n i n 1
240 in n 12 in n
4
12 n
EU Version
132
AL Control 1 ProSystem
Power RequirementOutputDMX OutputDMX ChannelsLink OutputLink InputPresets
Operation TemperatureStorage TemperatureHousingAvailable colorsDimensions Weight Including
DMX
DC 12-24VDMX 512 and Link4-pin terminal connector512 DMX channels4-pin terminal connector4-pin terminal connector7 preprogrammed scenes or 2 programmable scenes0 °C ~ +40 °C (32 °F ~ + 104 °F)0 °C ~ +70 °C (32 °F ~ + 158 °F)PolycarbonateWhite, (Gray and Black optional)85 x 85 x 31mm (3.4 x3.4 x1.2 in)75 gr. (2.53 oz.)IR remote
1
2
3
4
6
7
mm [3.3 in]
mm
[3.
3 in
]
26mm [1.0 in]
1m
m [
0.6
in]
RGB Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The AL Control 1 Pro is a professional, wall mount multi-function DMX controller, designed for RGB LED fixtures. It features an LCD display for easy ope-ration, programable scenes, built-in effects and an internal real-time clock for triggering. Ambient light and proximity sensors let the controller adapt to its environment. Besides programming your own effects, 7 preprogrammed effects are built in: fixed color, color changing, rainbow change, custom rainbow, random color, white and auto program. The built-in real time clock allows for starting or ending up to 16 events. Up to 12 scenes can be programmed, direct access is possible with 8 preset buttons. The LCD display adjusts to environmental lighting and human presence. The AL Control 1 Pro is a simple yet powerful DMX control solution for lounges, restaurants, bars and residential applications.
Model NumberDMX-TCA-01BE
Product NameAL Control 1 Pro (White)
AccessoriesIR Remote (including with purchase AL Control 1 Pro)
n 1
. 12
m
12 24 m . 6
i imm i
2 12
n 1 m . 32 ni in
4 in
EU Version
133
AL Fade 6-IISystem
Power RequirementConnection AL Fade 6 IIOutputInputDMX ChannelsDMX inputDMX OutputDMX start address PresetsOperation TemperatureStorage TemperatureHousingAvailable colorsDimensions Weight Including
DMX
AC 240VCat5 Cable Power 12VDC+DMX In+DMX OutDMX 512, Power 240V ACDMX 512, Power 240V AC6 channels repeated till 512 channels.3-pin terminal connector3-pin terminal connectorYes6 Fully programmable presets0 °C ~ +40 °C (32 °F ~ + 104 °F)0 °C ~ +70 °C (32 °F ~ + 158 °F)PolycarbonateWhite and Black, (Gray optional)85 x 85 x 15.5mm (3.4 x3.4 x 0.6 in)150 gr. (5.1 oz.)IR remote, Junction BOX 1 and CAT5 cable
RGB Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
OutputInputDMX ChannelsDMX inputDMX OutputDMX start address PresetsOperation TemperatureStorage TemperatureHousingAvailable colorsDimensions Weight Including
The AL Fade 6 II is a wall mount, 6 channel DMX controller, consisting of a wall mount control panel, an infra red remote control and a power/data supply unit for mains- and DMX in- and output and RJ45 terminal. The control panel connects to the power/data supply using the supplied RJ45 cable. 6 DMX channels facilitate control of for example 2 RGB fixtures or 6 single color fixture groups/zones. 6 Scenes with each 100 steps and assi-gnable fade time can be programmed and recalled, indicated by an LED which mimics the fader position in real time. A master fader controlling overall lighting level is present, acting as a fade time controller when the AL Fade 6 II is in programming mode. The DMX start address can be set as well. If no DMX start address is set, the unit will repeat DMX channel 1 thru 6 on all 512 DMX channels. LED indicators on the control panel indicate the current operation. The AL Fade 6 II finds its way to small lighting projects, such as bars, lounges, restaurants and hotels.
Model NumberDMX-ALF-06AE DMX-ALF-06BE
Product NameAL Fade 6-ll-E (EU Model) Black house AL Fade 6-ll-E (EU Model) White house
AccessoriesIR Remote (including with purchase AL Fade 6-ll )Junction box 1 (240Vac) (including with purchase AL Fade 6-ll )RJ45 Cat-5 Link cable 5 meter (including with purchase AL Fade 6-ll )
1 2 3 4 6
1 2 3 4 6
1 2 3 4 6
mm
[3.3
in]
2 mm [1.0 in]mm [3.3 in]
1 mm [0.6 in]
iimm i
12
240 n
240 m
n i n 1
240 in n 12 in n
4
6
6 6
m 6 nn
i 12 nn
12 n
EU Version
134
AL KP IISystem
Power RequirementConnection AL Fade 6 IIOutputInputDMX Ch. Manual modeDMX Ch. PreprogrammedDMX inputDMX OutputPresetsOperation TemperatureStorage TemperatureHousingAvailable colorsDimensionsWeightIncluding
DMX
240VacCat-5 Cable (Power 12VDC+DMX In+DMX Out)
DMX 512, Power 240V AC thruDMX 512, Power 240V AC3 channels repeated till 50412 ch. (4 RGB fixt.) repeated till 504 ch.3-pin terminal connector3-pin terminal connector10 preprogrammed scenes 0 °C ~ +40 °C (32 °F ~ + 104 °F)0 °C ~ +70 °C (32 °F ~ + 158 °F)PolycarbonateWhite and Black, (Gray optional)85 x 85 x 15.5mm (3.4 x3.4 x 0.6 in)150 gr. (5.1 oz.)IR remote, Junction Box 1 and CAT-5 cable
mm
[3.
3 in
]
2 mm [1.0 in]
i n
mm [3.3 in]1 mm [0.6 in]
RGB Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
Model NumberDMX-ALK-02BE DMX-ALK-02AE
Product NameAL KP-ll-E (EU Model) White house AL KP-ll-E (EU Model) Black house
AccessoriesIR Remote (including with purchase AL KP-ll )Junction box 1 (240Vac) (including with purchase AL KP-ll )RJ45 Cat-5 Link cable 5 meter (including with purchase AL KP-ll )
The AL KP II is a wall mount, DMX controller for RGB fixtures, consisting of a wall mount control panel, an infra red remote control and a power/data supply unit for mains- and DMX in- and output and RJ45 terminal. The control panel connects to the power/data supply using the supplied RJ45 cable.RGB fixtures can be controlled with individual R, G and B color saturation control in manual mode. In auto mode, 10 patterns are available, each with assignable fade time control. Fade time can be set in 10 steps from 1 to 512 seconds. An RGB LED indicator on the control panel is present to mimic the output state in real time. The AL KP II can be conveniently operated with the supplied IR remote control as well. The AL KP II will repeat DMX channel 1 thru 3 on the first 12 DMX channels. The AL KP II is an excellent solution for small lighting projects in shops, lounges, hotel lobbies and bars.
iimm i
12
240 n
240 m
n i n 1
240 in n 12 in n
4
3 10 i in m
12 nn n i 04
EU Version
135
ART 8DSystem
Power RequirementOutputDMX OutputDMX ChannelsDMX start address Link OutputLink InputPresetsOperation TemperatureStorage TemperatureHousingAvailable colorsDimensions EUWeight EUIncluding EU
DMX
DC 12-24VDMX 512 and Link4-pin terminal connector8 channels repeated till 512 channels.Yes4-pin terminal connector4-pin terminal connector8 programmable scenes0 °C ~ +40 °C (32 °F ~ + 104 °F)0 °C ~ +70 °C (32 °F ~ + 158 °F)PolycarbonateWhite, (Gray and Black optional)85 x 85 x 15.5mm (3.4 x3.4 x 0.6 in)100 gr. (3.38 oz.)IR remote
mm
[3.
3 in
]
60m
m [
2.4
in]
mm [3.3 in]16mm [0.6 in]
1 2
3 4
6
7
Singel Color Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
12 24 m . 6
i imm i
2 12
m . 32 ni in
4 in
m
. nn
n i 12 nn
Model NumberDMX-ART-08AE DMX-ART-08BE
Product NameArt 8D (EU) Black House Art 8D (EU) White House
AccessoriesIR remote (including with purchase Art 8D )
The Acclaim Lighting ART 8D is a wall-mount, stand-alone DMX lighting controller featuring a LED slide indicator to display the current output status and 8 programmable playback buttons. Up to 8 dimming scenes can be programmed, each with separate fade-in and fade-out time between 0 and 8 seconds. Also Power On and Power Off fade times may be set. Auto-dimming feature for front panel backlight: the backlight will dim after 1 minute of inactivity. Multiple ART 8D controllers can be inked together so lighting system control is possible from other ART 8D controllers as well. Font panel and programming mode can be locked to avoid unauthorized operation. The ART 8D features an infrared remote control a DMX output. It is available in black and white housing. The ART 8D can be used for small lighting configurations, for example in bars, hotel receptions and for residential applications.
EU Version
136
TC 1System
Power RequirementOutputDMX OutputDMX ChannelsAnalog OutputPresetsOperation TemperatureStorage TemperatureHousingAvailable colorsDimensionsWeightIncluding
DMX + 0-10V
DC 12-24V (PSU sold Seperatly)DMX 512 and Analog 0-10V3-pin terminal connectorAll channels in Unison2-pin terminal connector1 programmable scenes0 °C ~ +40 °C (32 °F ~ + 104 °F)0 °C ~ +70 °C (32 °F ~ + 158 °F)PolycarbonateWhite and Aluminum85 x 85 x 41mm (3.4 x 3.4 x 1.6 in)120 gr. (4 oz.)IR remote
6mm
[3.4
in]
40mm [1.6 in]
6mm [3.4 in] 9mm [0.4 in]
mm [3.3 in]
40m
m [1
.6 in
]
Singel Color Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting TC 1 is a professional, wall mount single channel Touch Controller, designed for white color LED fixtures. It features a single touch control dimmer fader, programmable fade time and comes with an infrared remote control. Switching on/off can be programmed to be instantly or with 5 seconds delay while the F button allows for changing the fade time between 0,01 and 10 seconds. The D button activates using the program-med fade time. Using the supplied IR remote control dimming can be performed, as well as one of three fixed intensities can be chosen. The TC 1 is the perfect choice for smooth dimming, either with DMX output or with 0-10V output. The TC 1 runs on 12-24 V DC. A power supply is not included.
Model NumberDMX-TCA-01BE
Product NameTC-1 White House (EU)
AccessoriesIR Remote (including with purchase TC 1 )
12 24 m . 6
2 12
m
12 nnn n
0 10 n
2
1
1 12 nn
in ni n.
0 10 n
EU Version
137
AL Net 8 ProSystem
Power RequirementInputDMX OutputHousingIngress Protection RatingControlListingOperating TemperatureStorage TemperatureDimensionsWeight
ArtNet / DMX controller
100 ~ 240 V AC, 50/60Hz2x ethernet port8 pcs 3-pin XLR female socketSheet metal with powder paintingIP20Artnet, CL100II protocolCE Certified0 °C ~ +40 °C (32 °F ~ + 104 °F)-20 °C ~ +70 °C (-4 °F ~ + 158 °F)19“ x 1U (482 x 205 x 44 mm) (19 x 8 x 1.7 in)1.5kg (3.3 lbs)
4 3mm [1 7.0 ]
4m
m [
1.9
]
Controller
www.acclaimlighting.eu
Description
Model Number
Dimensions
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Wiring Diagram
The Acclaim Lighting AL Net 8 Pro is an 8 universe Ethernet-to-DMX interface. You can choose to run either Artnet or the high-speed DMX 1000 control protocol. When using DMX 1000 protocol and the X-Software package up to 1800 DMX channels per universe can be controlled, making it an ideal interface for direct view or Video-to-Art-net products. The AL Net 8 Pro features 2 Ethernet ports for easy daisy chaining of multiple units, supporting TCP/IP, Art-net and CL100 II protocols. Individual IP adresses, Art-net Sub-net and Art-net Universe no. can be set. The supplied X-Software can be used for converting most common video formats (Flash, MPEG, AVI, WMV) into CL100 II, in order to run DMX 1000 controlled direct view fixtures or pixels. Each one of eight DMX outputs can be individually switched to DMX 512 or DMX 1000. The AL Net 8 Pro is a compact, 19 inch 1U high unit.
i n.
n 100
4
240 n
12 1000
n n
i imm i
12
1000
i imm i
Model NumberDMX-ALN-09AE DMX-ALN-09AU
Product NameAL Net 8 Pro 100-MB (VDE plug 240Vac) AL Net 8 Pro 100-MB (UL plug 110Vac)
138
XB-R1 Setup toolSystem
Power RequirementOutputDMX ChannelsHousingDimensionsWeightIncluding
Setup tool
24V DC / Rechargeable Internal BatteryDMX 512, 3 & 5 Pin XLR512 (manual dim for fixture testing)Polycarbonate207mm x 136mm x 80mm (8.1 x 5.4 x 3.1 in)1.2 kg (2.6 lbs.)24V 500mA PSU, 5 & 3 Pin XLR to Terminal Adaptors
Controller
www.acclaimlighting.eu
Description
Model Number
Content
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
The XB-R1 is a setup controller used to address and test fixtures when used with a DMX control system. Features 3 & 5 pin DMX out, as well as a 24v pass through for testing individual fixtures via the 5 pin connection. Depending on the fixture / driver is it possible to set different modes.
Model NumberDMX-XBR-01AEDMX-XBR-01AU
Product NameXB-R1 Setup tool 240Vac (VDE) XB-R1 Setup tool 120Vac (UL)
139
CablesCablesCablesCablesCables
8500 Burton Way, Beverly Hills, CA USA
140
ACCLAIMLIGHTING8500 Burton Way, Beverly Hills, CA USA
141
5 Pin WP Waterproof Cabling system (IP67)Model Number
CA-BAF-00200CA-BAL-00100CA-BAL-00300CA-BAL-00500CA-BAL-01000CA-BAL-01500CA-BAL-02500CA-BAS-10000CA-BAY-00030
Cables
5 pin WP First cable 2m5 pin WP Link cable 1m5 pin WP Link cable 3m5 pin WP Link cable 5m5 pin WP Link cable 10m5 pin WP Link cable 15m5 pin WP Link cable 25m5 Core DC Power / DMX Cable 100m5 pin WP Y cable male in - dual female out
24VDC + DMX
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
Link Cable
First Cable
Y - Cable
15 4
3214 5
23
1 : Ground ( shield )2 : Data - ( white )3 : Data + ( red )4 : GND ( black )5 : +24V DC ( white )
male 5 pin plug female 5 pin plug
2. mm [2.1in] . mm [2.2in]
24.0
mm
[0.
9in]
24.0
mm
[0.
9in]
m in m in
104.1mm [4.1in]
1 n i 2 i 3 4 24 i
1
4
32
in 67 n 2m
6.6
m
m
m
in 67 n 1 2 3 10 1 2 m
3.3 6.6 9. 16. 32. 49.2 2.
266mm [10. in]
12m
m [
6.0i
n] m
m m
Model Number
CO-BAF-00000CO-BAM-00000CO-BAT-00000CO-BAE-00000CO-BAA-00000CO-BAB-00000
Connectors
5 pin WP Female IP connector5 pin WP Male IP connector5 pin WP Male IP DMX Terminator5 pin WP End Cap5 pin WP Male socket5 pin WP Female socket
www.acclaimlighting.eu142
6 Pin WP Waterproof Cabling system (IP67)Model Number
CA-BBF-00200CA-BBL-00100CA-BBL-00300CA-BBL-00500CA-BBL-01000CA-BBL-01500CA-BBT-00030CA-BBS-10000
Cables
6 pin WP Starterkabel 2m6 pin WP Link cable 1m6 pin WP Link cable 3m6 pin WP Link cable 5m6 pin WP Link cable 10m6 pin WP Link cable 15m6 pin T cable6 Wire DC IP Cable spool 100m
Constant Current (6-Core)
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
Model Number
CO-BBF-00000CO-BBM-00000
Connectors
6 pin WP Female IP connector6 pin WP Male IP connector
www.acclaimlighting.eu
Dimensions
Link Cable
First Cable
Y - Cable
15 624
1 : red + (red)2 : red - (white)3 : green + (green) 4 : green - (brown)5 : blue + (blue)
male 6 pin plug female 6 pin plug
3
16 542
36 : blue - (black)
2. mm [2.1in] . mm [2.2in]
24.0
mm
[0.
9in]
24.0
mm
[0.
9in]
m 6 in m 6 in
104.2mm [4.1in]
1 2 i 3 n n 4 n n
6 1234
6
6 in 67 i n 2m
6.6
m
6 in 67 in n 1 3 10 1 m
3.3 9.9 16. 32. 49.2
m 6
m
266mm [10. in]
12m
m [
6.0i
n] m
m m
143
8 Pin WP Waterproof Cabling system (IP67)Model Number
CA-BCL-00060CA-BCL-00100CA-BCL-00200CA-BCL-00500CA-BCL-00700CA-BCL-01000CA-BCL-02000CA-BCL-02500CA-BCL-03000CA-BCL-05000CA-BCS-05000
Cables
8 pin WP Link cable 0,6m8 pin WP Link cable 1m8 pin WP Link cable 2m8 pin WP Link cable 5m8 pin WP Link cable 7m8 pin WP Link cable 10m8 pin WP Link cable 20m8 pin WP Link cable 25m8 pin WP Link cable 30m8 pin WP Link cable 50m8 Wire WP Cable spool 50m
100-240V DC + DMX
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Dimensions
Link Cable
1 : Ground ( shield )2 : Data - ( white )3 : Data + ( red )4 : NC5 : NC
male 8 pin plug female 8 pin plug
6 : Fase ( brown )
1
4
2
35
6
7
8
7
4
6
53
2
1
8
7 : Neutral ( blue )8 : Earth ( green/yellow )
77.5mm [3.1in] 74.0mm [2.9in]
29.8
mm
[1.2
in]
m in m in
29.6
mm
[1.2
in]
137.4mm [5.4in]
in 67 i n n 0.6 1 2 10 20 2 30 0 m
2 3.3 6.6 16.4 32. 6 .6 2 9 . 164.
m
in i n
m
Model Number
CO-BCF-00000CO-BCM-00000CO-BCA-00000CO-BCB-00000CO-BCT-00000CO-BCE-00000
Connectors
8 pin WP Female IP connector8 pin WP Male IP connector8 pin WP Male socket8 pin WP Female socket8 pin WP Male IP DMX Terminator8 pin WP End Cap
www.acclaimlighting.eu
Model Number
CA-BCJ-00100CA-BCK-00100CA-BCJ-00000CA-BCL-00000
Junction Cables and box
8 pin WP Junction Cable (UL)8 pin WP Junction Cable (VDE)8 pin WP Junction Cable Housing8 pin WP Junction Box (JB2)
109mm [4.3in]67.4mm [2.7in]
42m
m [
1.7i
n]
Junction Box (JB-2) Indoor
144
8 Pin WP Waterproof Cabling system (IP67)100-240V DC + DMX
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
Junction Cable VDE
3 pin DMX male plug
8 pin WP female plug CEE 16A / 250V AC plug
www.acclaimlighting.eu
3 pin DMX male plug
8 pin WP female plug NEMA 20A / 125V AC plug
3 pin DMX male plug
8 pin WP female plug BS 16A / 250V AC plug
Junction Cable UL
Junction Cable BS
Model Number CA-BCK-00100
Model Number CA-BCJ-00100
145
Description
www.acclaimlighting.eu
IP RatingIngress Protection
** All rights reserved. Improvements changes to specifications, design, and all contents in this catalog may be made at any time without prior notice.
ACCLAIMLIGHTING
IP## = IP Letter Code ------ IP
1st Digit: Protection from solid objects2nd Digit: Protection from moisture
1st Digit Object size protected against
Effective against
0 - No protection against contact and ingress objects
1 >50 mm Any large surface of the body, such as the back of the hand, but no protection against deliberate contact with a body part
2 >12.5 mm Fingers or similar objects
3 >2.5 mm Tools, thick wires, etc.
4 >1 mm Most wires, screws, etc.
5 Dust protected Ingress of dst is not entirely prevented, but it must not enter in sufficient quantity to interface with the satisfactory operation of the equipment; complete protection against contact
6 Dust tight No ingress of dust; complete protection against contact
2nd Digit Protected against Testing for Details
0 Not protected - -
1 Dripping water Dripping water (vertically falling drops) shall have no harmful effect.
Test duration: 10minutesWater equivalent to 1mm rainfall per minute
2 Dripping water when tilted up to 15°
Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position
Test duration: 10 minutesWater equivalent to 3mm rainfall per minute
3 Spraying water Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.
Test duration: 5 minutesWater volume: 0.7litres per minutePressure: 80-100 kPa
4 Splashing of water Water splashing against the enclosure from any direction shall have no harmful effect.
Test duration: 5 minutesWater volume: 10litres per minutePressure: 80-100 kPa
5 Water jets Water protected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effect.
Test duration: at least 3 minutesWater volume: 12.5litres per minutePressure: 30 kPa at a distance of 3m
6 Powerful water jets Water protected in powerful jets (12.5 mm nozzle) gainst the enclosure from any direction ahall have no harmful effects.
Test duration; at least 3 minutesWater volume: 100litres per minutePressure: 100 kPa at distance of 3m
7 Immersion up to 1m Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1m of submersion)
Test duration: 30 minutesImmersion at depth of at least 1m measured at bottom of device, and at least 15cm measured at top of device
8 Immersion beyond 1m The equipment is suitable for continuous im-mersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is herme-tically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.
Test duration: continious immersion in waterDepth specified by Acclaim Lighting
1st Digit
2nd Digit
146
147
PRODUCTS v5
PR
OD
UC
TS
v5.
2
YOUR SOURCE FOR ADVANCED LED LIGHTING SOLUTIONS
USA ( HQ )6122 S. Eastern AVELos AngelesCA 90040Phone: +1(323) 213-4626Fax : +1(323) 582-3108
EU - THE NETHERLANDSJunostraat 26468 EW Kerkrade,The NetherlandsPhone: +31 45 546 85 60Fax : +31 45 546 85 97
ASIA - HONG KONG J301 Hung to Centre,96 How Ming StreetKwun Tong, Kowloon,Phone: +852 6338 6123Phone: +86 147 1603 4675
SINGAPORENo. 2 Soon Wing Road #06-04Singapore 347893Phone: +65 9680 6878CTC: Denis Beh