Accessories PCB Relay Card Relay E › catalogs › 003585 › 2005 ›...
Transcript of Accessories PCB Relay Card Relay E › catalogs › 003585 › 2005 ›...
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
2/2
00
3
Accessories PCB Relay Card Relay Eand similar design: pinning 2.5 mm
Features· Socket with PCB- or screw terminals· No reduction of protection class or creepage / clearance
with plastic retainer· Easy replacement of relays· Socket can be used as connector for diagnosis function
RP 78 600 Socket with PCB terminals, pinning 2.5 mm
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >5000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -40...+80 °C Packaging unit 100 pcs.
Socket with PCB terminals
F0227-A
F0137-A
S0322-AE
RP 78 623 Socket with screw-type terminals,pinning 2.5 mm, for DIN-rail mounting
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...+85 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs.
F0118-A
Socket with screw-type terminals for DIN-rail mounting
Socket with screw-type terminals for DIN-rail mountingType Part NumberRP 78 623 Socket with screw-type terminals,
pinning 2.5 mm for DIN-rail mounting 8-1393234-6
Accessories for RP 78 623Type Part NumberRP 16 104 Plastic retaining clip 1-1393161-8RY 16 040 Marking tag 6-1393161-8RP M Modules see accessories RT / RP
Socket with PCB terminalsType Part NumberRP 78 600 Socket with PCB terminals, pinning 2.5 mm 8-1393234-3
Accessories for RP 78 600RP 16 100 Plastic retaining clip 1-1393161-7RP 28 500 Metal retaining clip 1-1393161-9
S0321BFE
Dimensions in mmView on solder pins
-
Editi
on: 0
2/2
00
3
Features· Snap-on mounting on DIN-rail· Screw mounting· Pozidrive screws with rising clamp terminals· Logical layout of input-/output connections· White marking area
Accessories Multimode Relay MTand similar design: octal / undecal
F0235-A
MT 78 750 MT3 DIN-rail socket with screw-type terminals 11pole
MT 78 755 MT2 DIN-rail socket with screw-type terminals 8pole
ZTechnical dataRated current 10 A Rated voltage 400 Vac Dielectric strength coil/cont. >3500 VrmsInsulation cat. (VDE 0110b) C / 400 Vac Tracking resistance CTI 300Ambient temperature +80 °C Protection category IP 20Protection against accidental
contact meets VBG 4Mounting DIN 50024 / 22Wire cross section 2 x 2.5 mm2
Terminal torque 0.8 Nm max. 1.0 Nm
Packaging unit 25 pcs.
F0103-A
S0311-BA
MT 78 760 MT3 DIN-rail socket with screw-type terminals 11pole
ZTechnical dataRated current 10 A Rated voltage 400 Vac Dielectric strength coil/cont. >3500 VrmsInsulation cat. (VDE 0110b) C / 400 Vac Tracking resistance CTI 300Ambient temperature +80 °C Protection category IP 20Protection against accidental
contact meets VBG 4Mounting DIN 50024 / 22Wire cross section 2 x 2.5 mm2
Terminal torque 0.8 Nm max. 1.0 Nm
Packaging unit 25 pcs.
F0103-A
S0311-BB
DIN-rail sockets with screw-type terminalsType Part NumberMT 78 750 MT3 DIN-rail socket with screw-type terminals 11pole 0-1415035-1MT 78 755 MT2 DIN-rail socket with screw-type terminals 8pole 3-1415035-1MT 78 760 MT3 DIN-rail socket with screw-type terminals 11pole 8-1415034-1
Accessories for MT 78 750, MT 78 755, MT 78 760MT 28 800 Metal retaining clip MT 8-1393163-0
S0414-AB
S0414-AA
Dimensions in mm
MT DIN-rail sockets with screw-type terminals
-
Editi
on: 0
2/2
00
3
Technical data - Function modulesNominal voltage 24...240 Vdc / VacMains frequency 48...63 HzPrecision of time setting + 0,5 %Readiness for repetition w 0,5 % or 5 msInfluence of temperature w 0,1 %/°CTime range switchable 0,05s...240h in 8 rangesAmbient temperature -25...+55 °C
Accessories Multimode Relay MTand similar design: octal / undecal
Z
Technical DataRated current 10 ARated voltage 400 Vac Dielectric strength coil/cont. >3000 VeffAmbient temperature +80 °C Protection category IP 20Protection against accidential
contact meets VBG 4Mounting/DIN rail DIN50022Wire cross section 2 x 2,5mm2
Terminal torque 0.8 NmPackaging unit 10 Stk.
F0200-A
S0366-A
DIN-rail socket with screw-type terminalsType Part NumberMT78 740 DIN-rail socket with screw-type terminals, 11 pole 8-1393163-3MT78 745 DIN-rail socket with screw-type terminals, 8 pole 8-1393163-4
Accessories for MT 78 740, MT 78 745Type Part NumberMT 28 800 Metal retaining clip MT 8-1393163-0
LED and Protection modules for MT 78 740, MT 78 745Type Part NumberMTM T0 0A0 Protection diode 1N4007 7-1393163-6MTM U0 524 RC-network 6...24 Vac 7-1393163-7MTM U0 730 RC-network 110...230 Vac 7-1393163-8
LEDMTM L0 024 red LED 24 Vac / Vdc 7-1393163-4MTM G0 024 green LED 24 Vac / Vdc 6-1419149-6MTM L0 730 red LED 110...230 Vac / Vdc 7-1393163-5MTM G0 730 green LED 110...230 Vac / Vdc 6-1419149-7
Function modules for MT 78 740, MT 78 745Type Part NumberMTM Z0 W00 Delay ON 7-1393163-9MTM F0 W00 Multifunction 7-1393163-3
MT 78 740 MT3 DIN-rail socket with screw-type terminals 11 pole
MT 78 745 MT2 DIN-rail socket with screw-type terminals 8 pole
F0203-A
F0204-A
F0201-A
F0202-A
Socket system MT 78 740 and MT 78 745· 8/11 pin socket for MT2 / MT3· Double A2 screw for simple further
connection of coil supply
Dimensions in mm
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
2/2
00
3
Accessories Multimode Relay MTand similar design: octal / undecal
MT 78 612 Socket 8 polewith solder terminals
MT 78 613 Socket 11 polewith solder terminals
MT 78 602 Socket 8 polewith PCB terminals
MT 78 603 Socket 11 polewith PCB terminals
Technical data MT78602...MT78613Rated current 10 A Rated voltage 250 Vac Dielectric strength coil/cont. >2500 VrmsAmbient temperature -40...+70 °C Packaging unit 25 pcs
F0107-A
F0105-A F0106-A
F0104-AS0309-AA
S0309-AC S0309-AD
S0309-AB
Dimensions in mmView on solder pins
Function modules for MT 78 740, MT 78 745Function Delay ON
Delay OFF
single shot leading edge
single shot trailing edge
Delay ONtriggerd by signal contact
single shot
flasher starting with pause
flasher starting with pulse
Sockets with solder and PCB terminalsType Part NumberMT 78 612 Socket 8 pole with solder terminals 7-1415043-1MT 78 613 Socket 11 pole with solder terminals 8-1415043-1MT 78 602 Socket 8 pole with PCB terminals 9-1415043-1MT 78 603 Socket 11 pole with PCB terminals 0-1415044-1
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
2/2
00
3
Accessories Miniature Power Relay PCLHand similar design
TM 78 700 Socket with screw-type terminals
Technical dataRated current 10 A Rated voltage 300 Vac Protection category IP 20Packaging unit 100 pcs.
F0236-A
F0129-A
S0310-B
Socket with screw-type terminalsType Part NumberTM 78 700 Socket with screw-type terminals 0-1393164-2
Accessories for TM 78 700Type Part NumberTM 28 800 Metal retaining clip for PCLH 0-1393164-1
Dimensions in mm
PCLH socket with screw-type terminals
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
3/2
00
3
Accessories Miniature Relay PTand similar design: relay heights 29 / 34.6 / 35.2 / 36.6 / 37.6mm
Features• Easy replacement of relays on a densely packed DIN rail• High quality rising clamp terminals• Captive combination terminal screws• No reduction of protection class or creepage/clearance
with plastic retainer• Simple plug-in indicator- and protection modules • White snap-on tags
Accessories for sockets:• Retaining clip• LED- and protection modules• Marking tags
ZTechnical dataRated current 4-pole 6 A
3-pole 10 A2-pole 12 A
Rated voltage 250 Vac Insulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -45...+70 °C 1)
Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Terminal torque 0.5 Nm max. 0.7 Nm
Packaging unit 10 pcs. 1) 50°C at rated load, 70°C at 80% of rated load
F0233-A
F0234-A S0320-AA
DIN-rail socket with screw type terminalsType Part NumberPT 78 720 DIN-rail socket with screw type terminals, 2 pole 6-1415034-1PT 78 730 DIN-rail socket with screw type terminals, 3 pole 9-1415071-1PT 78 740 DIN-rail socket with screw type terminals, 4 pole 4-1415033-1PT 78 741 DIN-rail socket with screw type terminals, 4 pole
package with protection diode module 5-1415034-1
Accessories for PT 78 720, PT 78 730, PT 78 740, PT 78 741Type Part NumberPT 17 016 Plastic retaining clip PT, relay height 29 mm 5-1415037-1PT 17 017 Plastic retaining clip, relay height 34.6 mm 7-1415037-1PT 17 018 Plastic retaining clip, relay height 35.2 mm 8-1415037-1PT 17 019 Plastic retaining clip, relay height 36.6 mm 9-1415037-1PT 17 020 Plastic retaining clip, relay height 37.6 mm 0-1415038-1PT 28 800 Metal retaining clip PT, relay height 29 mm 5-1419111-9ZG 28 801 Metal retaining clip, relay height 36 mm 1-1393162-5PT 17 040 Marking tag 6-1415037-1
Dimensions in mm
PT DIN-rail socket with screw type terminals
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
3/2
00
3
Accessories Miniature Relay PTand similar design: relay heights 29 / 34.6 / 35.2 / 36.6 / 37.6mm
LED- and Protection Modules for PT 78 720, PT 78 730 and PT 78 740Easy insertion of module into the socketWiring in parallel to the coilType Part NumberPTM T0 0A0 Protection diode (A1+, A2-) 9-1415036-1PTM T0 0L0 Protection diode (A1-, A2+) 0-1415037-1PTM U0 524 RC-network 6...60 Vac 1-1415037-1PTM U0 730 RC-network 110...230 Vac 2-1415037-1PTM V0 524 Varistor 24 Vac 3-1415037-1PTM V0 615 Varistor 115 Vac 6-1415365-1PTM V0 730 Varistor 230 Vac 4-1415037-1
LEDPTM L0 524 red LED 6...24 Vdc/Vac 6-1415036-1 PTM G0 524 green LED 6...24 Vdc/Vac 3-1415036-1PTM L0 024 red LED 6...24 Vdc w. prot.diode (A1+, A2-) 5-1415036-1PTM G0 024 green LED 6...24 Vdc w. prot.diode (A1+, A2-) 2-1415036-1PTM L1 024 red LED 6...24 Vdc w. prot. diode (A1-, A2+) 8-1415036-1PTM L0 110 red LED 48...110 Vdc w. prot. diode 2-1415392-1PTM L0 730 red LED 110...230 Vac 7-1415036-1PTM G0 730 green LED 110...230 Vac 4-1415036-1
F0231-A
F0232-A
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
3/2
00
3
Z
Technical dataRated current 4 x 6 A, 3 x 10 A, 2 x 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VeffInsulation category (VDE 0110b) C / 250 Vac Ambient temperature -45...+70 °C 1)
Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Terminal torque 0.5 Nm max. 0.8 Nm
Packaging unit 10 pcs. 1) at rated current to +40 °C, up to +70 °C at70% of rated current
F0192-A
S0356-A
F0123-A
Accessories Miniature Relay PTand similar design: relay heights 29 / 34.6 / 35.2 / 36.6 / 37.6mm
DIN-rail socket with screw type terminalsType Part NumberPT 78 702 DIN-rail socket with screw type terminals, 2 pole 9-1419111-9PT 78 703 DIN-rail socket with screw type terminals, 3 pole 0-1419112-1PT 78 704 DIN-rail socket with screw type terminals, 4 pole 0-1419112-2
Accessories for PT 78 702, PT 78 703, PT 78 704Type Part NumberPT 16 016 Plastic retaining clip PT, relay height 29 mm 3-1419111-8PT 28 800 Metal retaining clip PT, relay height 29 mm 5-1419111-9ZG 28 801 Metal retaining clip, relay height 36 mm 1-1393162-5PT 16 040 Marking tag 3-1419111-9
LED- and Protection Modules for PT 78 702, PT 78 703, PT 78 704Easy insertion of module into the socketWiring in parallel to the coilType Part NumberRPM T0 0A0 Protection diode 1N4007 1) 1-1393161-1RPM U0 548 RC-network 24...48 Vac 1-1393161-3RPM U0 730 RC-network 110...230 Vac 1-1393161-4
LEDRPM L0 024 red LED 12...24 Vdc w.prot.diode 1) 0-1393161-4RPM G0 024 green LED 12...24 Vdc w.prot.diode 1) 0-1393161-3RPM L0 524 red LED 12...48 Vdc / Vac 0-1393161-7RPM G0 524 green LED 12...48 Vdc / Vac 2-1419152-4RPM L0 110 red LED 60...110 Vdc w.prot.diode 1) 0-1393161-6RPM G0 110 green LED 60...110 Vdc w.prot.diode 1) 2-1419152-3RPM L0 730 red LED 110...230 Vac 0-1393161-8RPM G0 730 green LED 110...230 Vac 2-1419152-51) Standard polarity: A1+, A2-
Dimensions in mm
PT DIN-rail socket with screw type terminals
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
3/2
00
3
PT 78 600 Socket with solder terminals, 4 pole
Accessories Miniature Relay PTand similar design: relay heights 29 / 34.6 / 35.2 / 36.6 / 37.6mm
Chassis cut-out
PT 78 604 4 pole
PT 78 603 3 pole
PT 78 602 2 pole
Socket with PCB terminals
PT 78 601 Socket with solder terminals, 4 pole
Chassis cut-out
Technical dataRated current 10 A Rated voltage 250 Vac Dielectric strength coil/cont. >1500 VrmsAmbient temperature -40...+70 °C Packaging unit 25 pcs.
Technical dataRated current 10 A Rated voltage 250 Vac Dielectric strength coil/cont. >1500 VrmsAmbient temperature -40...+70 °C Packaging unit 25 pcs.
Technical dataRated current 10 A Rated voltage 250 Vac Dielectric strength coil/cont. >1500 VrmsAmbient temperature -40...+70 °C Packaging unit 25 pcs.
F0132-A
F0133-A
F0134-A
S0308-AC
S0308-AB
S0308-AA
PT sockets Type Part NumberPT 78 600 Socket with solder terminals, 4 pole 4-1415043-1PT 78 602 Socket with PCB terminals, 2 pole 5-1415043-1PT 78 603 Socket with PCB terminals, 3 pole 0-1393162-5PT 78 604 Socket with PCB terminals, 4 pole 3-1415043-1PT 78 601 Socket with solder terminals, 4 pole 6-1415043-1
Accessories for PT 78 600, PT 78 601, PT 78 602, PT 78 603, PT 78 604Type Part NumberPT 28 802 Metal retaining clip PT, relay height 29 mm 0-1393162-1ZG 28 800 Metal retaining clip, relay height 36 mm 1-1393162-4
Dimensions in mmView on solder pins
-
Editi
on: 0
2/2
00
3
Accessories Power Relay RM2 / 3 pole, 10 / 16 A
V s
Technical dataRated current 16 A Rated voltage 380 Vac Dielectric strength coil/cont. >2500 VrmsAmbient temperature -40...+50 °C Terminal torque 0.8 Nm
max. 1.2 Nm Packaging unit 100 pcs.
RM 78704 Socket with screw-type terminals
Technical dataRated current 16 A Rated voltage 250 Vac Dielectric strength coil/cont. >2500 VrmsAmbient temperature -40...+40 °C Terminal torque 0.8 Nm
max. 1.2 Nm Packaging unit 100 pcs.
RM 78 705 Socket with screw-type terminals
F0237-A
F0113-A
F0114-A
S0318-A
S0317-A
Dimensions in mm
Socket with screw-type terminalsType Part NumberRM 78 704 Socket with screw-type terminals 2-1393844-4RM 78 705 Socket with screw-type terminals 2-1393844-5
RM Sockets with screw-type terminals
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
2/2
00
3
RM 78 700 Socket with Faston terminals
Chassis cut-out
RM 78 701 Socket with solder terminals
RM 78 702 Socket with PCB terminals
Chassis cut-out
Accessories Power Relay RM2 / 3 pole, 10 / 16 A
F0110-A
F0111-A
F0112-A
S0319-AB
S0319-AA
S0319-AA
U 300 Vac / 10 A
SocketsType Part NumberRM 78 700 Socket with Faston terminals 0-1419118-6RM 78 701 Socket with solder terminals 4-1393149-9RM 78 702 Socket with PCB terminals 2-1393844-3
Accessories for RM 78 700, RM 78 701, RM 78 702Type Part NumberRM 28 802 Metal retaining clip RM 0-1419118-5
Dimensions in mmView on solder pins
-
Editi
on: 0
2/2
00
3
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
Features· New retainer clip with ejection function· Easy replacement of relays on a densely packed DIN rail· High quality rising clamp terminals· Captive combination terminal screws· No reduction of protection class or creepage/clearance
with plastic retainer· Simple plug-in indicator- and protection modules · White snap-on tags· Not suitable for bistable relays with 2 coilsAccessories for sockets:· Rejector· LED- and protection modules· Marking tags
RT 78 724 Socket with screw-type terminals,pinning 3.5 mm for DIN rail mounting
ZTechnical dataRated current 12 A Rated voltage 250 Vac Insulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...85 °C Protection category IP 20Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Terminal torque 0.5 Nm max. 0.7 Nm
Packaging unit 10 pcs.
Socket with screw-type terminals for DIN rail mounting
F0228-A
F0229-A
S0416-AA
RT 78 726 Socket with screw-type terminals,pinning 5 mm for DIN rail mounting
ZTechnical dataRated current 1 pole 12 A *)
2 pole 2 x 12 A Rated voltage 250 Vac Insulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...85 °C Protection category IP 20Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Terminal torque 0.5 Nm max. 0.7 Nm
Packaging unit 10 pcs. *) For 1 pole relays (16 A) the relay terminals11-21, 12-22 and 14-24 have to be bridged For 1 pole relays (12 A) the relay terminals 11-12-14 have to be connected to the socketterminals 21-12-24
F0230-A
S0416-AB
RT 78 724 and RT 78 726
· Logical setup of connections (input / output)· Safe separation to VDE 0106
Dimensions in mm
Socket with screw-type terminals for DIN rail mountingType Part NumberRT 78 724 Socket with screw-type terminals,
pinning 3.5 mm for DIN rail mounting 8-1415035-1RT 78 726 Socket with screw-type terminals,
pinning 5 mm for DIN rail mounting 6-1415035-1
-
Editi
on: 0
2/2
00
3
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
Accessories for RT 78 724, RT 78 726Type Part NumberRT 17 016 Plastic retaining clip, relay height 15.7 and 25.5 mm 1-1415038-1RT 17 040 Marking tag 2-1415038-1
LED- and Protection Modules for RT 78 724, RT 78 726Easy insertion of module into the socketWiring in parallel to the coilType Part NumberPTM T0 0A0 Protection diode (A1+, A2-) 9-1415036-1PTM T0 0L0 Protection diode (A1-, A2+) 0-1415037-1PTM U0 524 RC-network 6...60 Vac 1-1415037-1PTM U0 730 RC-network 110...230 Vac 2-1415037-1PTM V0 524 Varistor 24 Vac 3-1415037-1PTM V0 615 Varistor 115 Vac 6-1415365-1PTM V0 730 Varistor 230 Vac 4-1415037-1
LEDPTM L0 524 red LED 6...24 Vdc/Vac 6-1415036-1 PTM G0 524 green LED 6...24 Vdc/Vac 3-1415036-1PTM L0 024 red LED 6...24 Vdc w. prot.diode (A1+, A2-) 5-1415036-1PTM G0 024 green LED 6...24 Vdc w. prot.diode (A1+, A2-) 2-1415036-1PTM L1 024 red LED 6...24 Vdc w. prot. diode (A1-, A2+) 8-1415036-1PTM L0 730 red LED 110...230 Vac 7-1415036-1PTM G0 730 green LED 110...230 Vac 4-1415036-1
F0231-A
F0232-A
Marking tags· White marking area 15.5 x 6 mm· Snaps on socket in up to 4 positions
S0416-AC
-
Editi
on: 0
2/2
00
3
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...85 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs.
RT 78 624 Socket with screw-type terminals, pinning 3.5 mmfor DIN rail mounting
ZTechnical dataRated current 1 pole 12 A *)
2 pole 2 x 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...+80 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs. *) For 1 pole relays (16 A) the terminals 11-21,12-22 and 14-24 have to be bridged For 1 pole relays (12 A) the terminals 11-12-14 have to be connected to the socketterminals 21-12-24
RT 78 625 Socket with screw-type terminals, pinning 5 mmfor DIN rail mounting
F0120-A
F0121-A
S0321-BC
S0321-BD
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
ZTechnical dataRated current 1 pole 12 A *)
2 pole 2 x 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...+80 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs. *) For 1 pole relays (16 A) the terminals 11-21,12-22 and 14-24 have to be bridged For 1 pole relays (12 A) the terminals 11-12-14 have to be connected to the socketterminals 21-12-24
RT 78 626 Socket with screw-type terminals, pinning 5 mmfor DIN rail mounting
F0122-A
S0321-BE
RT 78 624 and RT 78 626· Logical setup of connections (input / output)· Safe separation to VDE 0106
Dimensions in mm
Socket with screw-type terminals, for DIN rail mountingType Part NumberRT 78 624 Socket with screw-type terminals,
pinning 3.5 mm for DIN rail mounting 2-1419108-1RT 78 625 Socket with screw-type terminals,
pinning 5 mm for DIN rail mounting 2-1419108-2RT 78 626 Socket with screw-type terminals,
pinning 5 mm for DIN rail mounting 2-1419108-3
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
2/2
00
3
RP 78 601 Socket with PCB terminals,pinning 3.5 mm
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >5000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -40...+80 °C Packaging unit 100 pcs.
RP 78 602 Socket with PCB terminals,pinning 5 mm
ZTechnical dataRated current 1 pole 12 A
2 pole 2 x 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >5000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -40...+80 °C Packaging unit 100 pcs.
F0116-A
F0117-A
S0322-AD
S0322-AC
Marking tags· White marking area 15.5 x 6 mm· Snaps on socket in up to 4 positions
LED- and Protection Modules for RT 78 624, RT 78 625, RT 78 626 andRP 78 623, RY 78 626
Easy insertion of module into the socketWiring in parallel to the coilType Part NumberRPM T0 0A0 Protection diode 1N4007 1) 1-1393161-1RPM U0 548 RC-network 24...48 Vac 1-1393161-3RPM U0 730 RC-network 110...230 Vac 1-1393161-4
LEDRPM L0 024 red LED 12...24 Vdc w.prot.diode 1) 0-1393161-4RPM G0 024 green LED 12...24 Vdc w.prot.diode 1) 0-1393161-3RPM L0 524 red LED 12...48 Vdc / Vac 0-1393161-7RPM G0 524 green LED 12...48 Vdc / Vac 2-1419152-4RPM L0 110 red LED 60...110 Vdc w.prot.diode 1) 0-1393161-6RPM G0 110 green LED 60...110 Vdc w.prot.diode 1) 2-1419152-3RPM L0 730 red LED 110...230 Vac 0-1393161-8RPM G0 730 green LED 110...230 Vac 2-1419152-51) Standard polarity: A1:+, A2:-
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
F0123-A
S0321-BF
Accessories for RT 78 624, RT 78 625, RT 78 626Type Part NumberRT 16 016 Plastic retaining clip RT, relay height 15.7 mm 3-1393161-3RP 16 104 Plastic retaining clip RP, relay height 25.5 mm 1-1393161-8RY 16 040 Marking tag 6-1393161-8
Socket with PCB terminalsType Part NumberRP 78 601 Socket with PCB terminals,pinning 3.5 mm 8-1393234-4RP 78 602 Socket with PCB terminals,pinning 5 mm 8-1393234-5
Accessories for RP 78 601, RP 78 602Type Part NumberRT 16 041 Plastic retaining clip RT, relay height 15.7 mm 3-1393161-4RP 16 100 Plastic retaining clip RP, relay height 25.5 mm 1-1393161-7RT 28 516 Metal retaining clip RT, relay height 15.7 mm 0-1419108-7RP 28 500 Metal retaining clip RP, relay height 25.5 mm 1-1393161-9
Dimensions in mmView on solder pins
Socket with PCB terminals
-
Editi
on: 0
2/2
00
3
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
Features· New retainer clip with ejection function· Easy replacement of relays on a densely packed DIN rail· High quality rising clamp terminals· Captive combination terminal screws· No reduction of protection class or creepage/clearance
with plastic retainer· Simple plug-in indicator- and protection modules · White snap-on tags· Not suitable for bistable relays with 2 coilsAccessories for sockets:· Rejector· LED- and protection modules· Marking tags
RT 78 724 Socket with screw-type terminals,pinning 3.5 mm for DIN rail mounting
ZTechnical dataRated current 12 A Rated voltage 250 Vac Insulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...85 °C Protection category IP 20Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Terminal torque 0.5 Nm max. 0.7 Nm
Packaging unit 10 pcs.
Socket with screw-type terminals for DIN rail mounting
F0228-A
F0229-A
S0416-AA
RT 78 726 Socket with screw-type terminals,pinning 5 mm for DIN rail mounting
ZTechnical dataRated current 1 pole 12 A *)
2 pole 2 x 12 A Rated voltage 250 Vac Insulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...85 °C Protection category IP 20Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Terminal torque 0.5 Nm max. 0.7 Nm
Packaging unit 10 pcs. *) For 1 pole relays (16 A) the relay terminals11-21, 12-22 and 14-24 have to be bridged For 1 pole relays (12 A) the relay terminals 11-12-14 have to be connected to the socketterminals 21-12-24
F0230-A
S0416-AB
RT 78 724 and RT 78 726
· Logical setup of connections (input / output)· Safe separation to VDE 0106
Dimensions in mm
Socket with screw-type terminals for DIN rail mountingType Part NumberRT 78 724 Socket with screw-type terminals,
pinning 3.5 mm for DIN rail mounting 8-1415035-1RT 78 726 Socket with screw-type terminals,
pinning 5 mm for DIN rail mounting 6-1415035-1
-
Editi
on: 0
2/2
00
3
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
Accessories for RT 78 724, RT 78 726Type Part NumberRT 17 016 Plastic retaining clip, relay height 15.7 and 25.5 mm 1-1415038-1RT 17 040 Marking tag 2-1415038-1
LED- and Protection Modules for RT 78 724, RT 78 726Easy insertion of module into the socketWiring in parallel to the coilType Part NumberPTM T0 0A0 Protection diode (A1+, A2-) 9-1415036-1PTM T0 0L0 Protection diode (A1-, A2+) 0-1415037-1PTM U0 524 RC-network 6...60 Vac 1-1415037-1PTM U0 730 RC-network 110...230 Vac 2-1415037-1PTM V0 524 Varistor 24 Vac 3-1415037-1PTM V0 615 Varistor 115 Vac 6-1415365-1PTM V0 730 Varistor 230 Vac 4-1415037-1
LEDPTM L0 524 red LED 6...24 Vdc/Vac 6-1415036-1 PTM G0 524 green LED 6...24 Vdc/Vac 3-1415036-1PTM L0 024 red LED 6...24 Vdc w. prot.diode (A1+, A2-) 5-1415036-1PTM G0 024 green LED 6...24 Vdc w. prot.diode (A1+, A2-) 2-1415036-1PTM L1 024 red LED 6...24 Vdc w. prot. diode (A1-, A2+) 8-1415036-1PTM L0 730 red LED 110...230 Vac 7-1415036-1PTM G0 730 green LED 110...230 Vac 4-1415036-1
F0231-A
F0232-A
Marking tags· White marking area 15.5 x 6 mm· Snaps on socket in up to 4 positions
S0416-AC
-
Editi
on: 0
2/2
00
3
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...85 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs.
RT 78 624 Socket with screw-type terminals, pinning 3.5 mmfor DIN rail mounting
ZTechnical dataRated current 1 pole 12 A *)
2 pole 2 x 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...+80 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs. *) For 1 pole relays (16 A) the terminals 11-21,12-22 and 14-24 have to be bridged For 1 pole relays (12 A) the terminals 11-12-14 have to be connected to the socketterminals 21-12-24
RT 78 625 Socket with screw-type terminals, pinning 5 mmfor DIN rail mounting
F0120-A
F0121-A
S0321-BC
S0321-BD
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
ZTechnical dataRated current 1 pole 12 A *)
2 pole 2 x 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...+80 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs. *) For 1 pole relays (16 A) the terminals 11-21,12-22 and 14-24 have to be bridged For 1 pole relays (12 A) the terminals 11-12-14 have to be connected to the socketterminals 21-12-24
RT 78 626 Socket with screw-type terminals, pinning 5 mmfor DIN rail mounting
F0122-A
S0321-BE
RT 78 624 and RT 78 626· Logical setup of connections (input / output)· Safe separation to VDE 0106
Dimensions in mm
Socket with screw-type terminals, for DIN rail mountingType Part NumberRT 78 624 Socket with screw-type terminals,
pinning 3.5 mm for DIN rail mounting 2-1419108-1RT 78 625 Socket with screw-type terminals,
pinning 5 mm for DIN rail mounting 2-1419108-2RT 78 626 Socket with screw-type terminals,
pinning 5 mm for DIN rail mounting 2-1419108-3
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
2/2
00
3
RP 78 601 Socket with PCB terminals,pinning 3.5 mm
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >5000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -40...+80 °C Packaging unit 100 pcs.
RP 78 602 Socket with PCB terminals,pinning 5 mm
ZTechnical dataRated current 1 pole 12 A
2 pole 2 x 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >5000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -40...+80 °C Packaging unit 100 pcs.
F0116-A
F0117-A
S0322-AD
S0322-AC
Marking tags· White marking area 15.5 x 6 mm· Snaps on socket in up to 4 positions
LED- and Protection Modules for RT 78 624, RT 78 625, RT 78 626 andRP 78 623, RY 78 626
Easy insertion of module into the socketWiring in parallel to the coilType Part NumberRPM T0 0A0 Protection diode 1N4007 1) 1-1393161-1RPM U0 548 RC-network 24...48 Vac 1-1393161-3RPM U0 730 RC-network 110...230 Vac 1-1393161-4
LEDRPM L0 024 red LED 12...24 Vdc w.prot.diode 1) 0-1393161-4RPM G0 024 green LED 12...24 Vdc w.prot.diode 1) 0-1393161-3RPM L0 524 red LED 12...48 Vdc / Vac 0-1393161-7RPM G0 524 green LED 12...48 Vdc / Vac 2-1419152-4RPM L0 110 red LED 60...110 Vdc w.prot.diode 1) 0-1393161-6RPM G0 110 green LED 60...110 Vdc w.prot.diode 1) 2-1419152-3RPM L0 730 red LED 110...230 Vac 0-1393161-8RPM G0 730 green LED 110...230 Vac 2-1419152-51) Standard polarity: A1:+, A2:-
Accessories Industrial Power Relay RT / RP / SR2Mand similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
F0123-A
S0321-BF
Accessories for RT 78 624, RT 78 625, RT 78 626Type Part NumberRT 16 016 Plastic retaining clip RT, relay height 15.7 mm 3-1393161-3RP 16 104 Plastic retaining clip RP, relay height 25.5 mm 1-1393161-8RY 16 040 Marking tag 6-1393161-8
Socket with PCB terminalsType Part NumberRP 78 601 Socket with PCB terminals,pinning 3.5 mm 8-1393234-4RP 78 602 Socket with PCB terminals,pinning 5 mm 8-1393234-5
Accessories for RP 78 601, RP 78 602Type Part NumberRT 16 041 Plastic retaining clip RT, relay height 15.7 mm 3-1393161-4RP 16 100 Plastic retaining clip RP, relay height 25.5 mm 1-1393161-7RT 28 516 Metal retaining clip RT, relay height 15.7 mm 0-1419108-7RP 28 500 Metal retaining clip RP, relay height 25.5 mm 1-1393161-9
Dimensions in mmView on solder pins
Socket with PCB terminals
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
9/2
00
3
Accessories Miniature PCB Relay RYIIand similar design: pinning 3.2 / 5 mm
Features• Socket with PCB- or screw terminals• No reduction of protection class or creepage/clearance
with plastic retainer• Easy replacement of relays• Socket can be used as connector for diagnosis function• Not suitable for MSR-type
RY 78 626 Socket with screw-type terminalsfor DIN-rail mounting, pinning 3.2 mm
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >4000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -25...+85 °C Protection category IP 20Protection against accidental
contact meets VBG 4Wire cross section 2 x 2.5 mm2
with bootlace crimp 2 x 1.5 mm2
Packaging unit 10 pcs.
Dimensions in mmView on solder pins
F0226-A
F0125-A
F0127-A
S0322-AA
RYII Socket with screw-type terminals for DIN-rail mounting
Socket with PCB terminalsType Part NumberRY 78 600 Socket with PCB terminals, pinning 3.2 mm 7-1393161-3
Accessories for RY 78 600RY 16 037 Plastic retaining clip 6-1393161-5
Socket with screw-type terminals for DIN-rail mountingType Part NumberRY 78 626 Socket with screw-type terminals for DIN-rail
mounting, pinning 3.2 mm 7-1393161-8
Accessories for RY 78 626RY 16 046 Plastic retaining clip 7-1393161-1RY 16 040 Marking tag 6-1393161-8RPM Modules see accessories RT / RP
S0321-BA
RYII Socket with PCB terminals RY 78 600 Socket with PCB terminals, pinning 3.2 mm
ZTechnical dataRated current 12 A Rated voltage 300 Vac Dielectric strength coil/cont. >5000 VrmsInsulation cat. (VDE 0110b) C / 250 Vac Ambient temperature -40...+80 °C Packaging unit 100 pcs.
RY 78 600 pinning 3.2 mm
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
Editi
on: 0
2/2
00
3
Accessories Slim Interface Relay SNR
AccessoriesProduct code Part NumberST 1F 000 Socket without LED 4-1415024-1ST 1F L24 Socket with LED, 12...24 Vdc 5-1415024-1ST 16 016 Mounting frame for relay, without marking 6-1415024-1ST 17 002 Jumper bar 2 pole 7-1415024-1ST 17 005 Jumper bar 5 pole 8-1415024-1ST 17 010 Jumper bar 10 pole 9-1415024-1ST 16 040 Marking plate, consisting of 100 marking tags 0-1415025-1
Available setsSet consisting of: relay in mounting frame, mounted on socketProduct code Part NumberST 1P3 024 24 Vdc, AgSnO2 contacts 3-1415024-1ST 1P3 L12 12 Vdc, with LED, AgSnO2 contacts 2-1415025-1ST 1P3 L24 24 Vdc, with LED, AgSnO2 contacts 3-1415025-1ST 1P3 L48 48 Vdc, with LED, AgSnO2 contacts 4-1415025-1ST 1P2 L24 24 Vdc, with LED, AgSnO2 gold plated contacts 6-1415025-1
Technical dataRated current / rated voltage 6 A / 250 Vac Dielectric stregth coil-contact >4000 VrmsInsulation category (VDE 0110b) C / 250 Ambient temperature -20...55 °C Protection category IP 20Protection against accidental contact meets VBG 4Wire cross section with/without bootlace crimp 0.22...2.5mm2
Terminal torque nom./max. 0.4 / 0.6 Nm Packaging unit 10 pcs.
Features· Module width 5.08 mm · Reduced system width for increased packing density
on the DIN rail· Jumper bars
Z
F0222-B
Dimensions in mm
-
Rig
hts
to c
hang
e da
ta/
desi
gn re
serv
ed
All sockets in this catalog have been tested and approvedwith the Tyco Electronics Schrack product range. Forcombination of sockets with other relays with similar designand pinning we cannot take responsibility for anymalfunction.
Sockets and Accessories