Accessories for stoves and fireplace inserts - jotul… · Products’ certificates, technical...

Painted pipes

Enameled pipes

Reductions and connectors

Chimney crossings

Air intake

Heating systems

Accessories for fireplace

inserts

Accessories for stoves

Floor panels

Accessories for installation

Accessories for maintenance

Promotional accessories

September2012

Jøtul Polska Spółka z o.o.ul. Twarda 12 A80-871 GdańskPoland Tel: +48 58 340 38 88 Fax: +48 58 344 96 28 www.jotul.pl

Jøtul constantly emphasizes the importance of innovation and works on product development each day. Therefore, technical specification, stylistics and other characteristics of our products are subjects to change without prior notice.

September 2012

Accessories for stoves and fireplace inserts

Products’ certificates, technical drawings and specification can be found on the websites:

www.jotul.plwww.kominek.pl

Jøtul Group Accessories

Accessories presented in this catalogue contain a vast range of painted and enameled smoke pipes dedicated for firewood-fuelled stoves. The catalogue also presents elements of heating systems which can be furnished with accumulating masses as well as water exchangers. Additionally, it covers big variety of steel and glass floor panels. To simplify the selection of accessories, we attached adequate optional equipment to each our stove and fireplace model.

Due to the ever-changing needs of the market, we continually work on developing our products to meet the customers’ needs.

High quality of each element

Den største sikkerhetsrisikoen ved fyring finnes mellom iSafe use predominantly depends on materials and accessories used. Caring for our customers’ safety, we make sure that each and every product conforms to demanding safety measures.The whole process of production is based on profound knowledge, lifelong experience and reliable craftsmanship. Throughout the whole process of production, each product is made and controlled by highly skilled experts.

Our customers are absolutely convinced of high quality of our products.

Page

Pipes covered with protective paint Ø 180, Ø 200, Ø 250 mm 4

Pipes covered with grey senotherm paint (GP) Ø 150 mm 5

Pipes covered with black senotherm paint (BP) Ø 120, Ø 130, Ø 150, Ø 160, Ø 180, Ø 200 mm 5

Enamelled pipes Ø 150 mm 6

Reductions and connectors 8

Fitting elements and chimney connectors 9

Pipes with draught regulation, choke valve with ignition flap, radiators and heat exchangers 10

Accessories for air intake Air inlets, air intakes and fitting pipe system 11

Choke valves with regulation 12

Electronic flame controller 11

Heating systems Fitting pipe system 14

Aluspiro system 15

Ducted system 16

Forced system 17

Technical data Elements of heating systems 19

Chimney connection 19

Water exchangers 20

Accumulating masses HSS 21

Accessories for fireplace inserts Jøtul I 570 FL 22

Jøtul I 18 23

Jøtul I 80 RH, Jøtul I 530 FL 24

Jøtul I 80 Maxi, Jøtul I 200 FL, Jøtul I 500 FL 25

Jøtul I 80 Maxi, Jøtul I 350 FL 26

Jøtul I 150 FL, Jøtul I 400 27

Accessories for free standing stoves Jøtul F 160, Jøtul F 260 28

Jøtul F 360, Jøtul F 370, Jøtul F 470 29

Jøtul F 3 TD, Jøtul MF 3,Jøtul F 8, Jøtul F 3 30

Jøtul F 602 N, Jøtul F 400, Jøtul F 500, Jøtul F 600 31

Steel floor panels Black steel floor panels 32

Grey steel floor panels 34

Glass floor panels Colourless glass floor panels 35

Bevelled colourless glass floor panels 36

Coloured glass panels 36

Accessories for installation and maintenance Wall grates 38

Accessories for installation 43

Accessories for maintenance 45

Accessories for fireplaces 46

Promotional accessories 47

Table of contents

Air intake

Painted and enamelled pipes

Smoke pipes fittings

Heating systems

Technical data

Accessories for fireplace inserts and stoves

Floor panels

Accessories for installation, maintenanceand promotional

4 5

Dimensions in mmPainted pipes covered with black protective paint

Thickness of walls 2 mm IndexPipes Ø 180 2,0 mm, covered with black protective paintSteel pipes coated with protective paint are intended for installation of fireplace inserts. Protective paint serves as a protective layer for the time of storage and transportSteel pipe Ø 180 x 250 SF40M08A039Steel pipe Ø 180 x 500 SF40M08A038Steel pipe Ø 180 x 1000 SF40M08A037Three-piece steel elbow Ø 180 SF40M08E012Four-piece steel elbow Ø 180 SF40M08E015

Pipes Ø 200 2,0 mm, covered with black protective paintSteel pipe Ø 200 x 250 SF40M08A042Steel pipe Ø 200 x 500 SF40M08A041Steel pipe Ø 200 x 1000 SF40M08A040Three-piece steel elbow Ø 200 SF40M08E013Four-piece steel elbow Ø 200 SF40M08E016

Pipes Ø 250 2,0 mm, covered with black protective paintSteel pipe Ø 250 x 250 SF40M08A063Steel pipe Ø 250 x 500 SF40M08A062Steel pipe Ø 250 x 1000 SF40M08A051Three-piece steel elbow Ø 250 SF40M08E022Four-piece steel elbow Ø 250 SF40M08E023

4 5

Dimensions in mmPipes covered with grey senotherm paint (GP)

Thickness of walls 2 mm IndexPipes Ø 150 2,0 mm, covered with grey senotherm paint (GP)Steel pipes covered with grey senotherm paint are intended for installation of free standing stoves. Senotherm paint cover is resistant to high temperatures..Steel pipe Ø 150 x 250 SF40M08A027Steel pipe Ø 150 x 500 SF40M08A021Steel pipe Ø 150 x 1000 SF40M08A015Three-piece elbow Ø 150 SF40M08E007Steel elbow, fullform Ø 150 450x700 90° MB SF40M08E008Steel rosette Ø 150 SF40M08I006

Pipes covered with black senotherm paint (BP)Thickness of walls 2 mm Index

Pipes Ø 120 2,0 mm, black senotherm paint (BP)Steel pipes coated with black senotherm paint are intended for installation of free standing stoves. Senotherm paint cover is resistant to high temperatures.Steel pipe Ø 120 x 250 SF40M08A003Steel pipe Ø 120 x 500 SF40M08A002Steel pipe Ø 120 x 1000 SF40M08A001Three-piece elbow Ø 120 SF40M08E001Steel rosette Ø 120 SF40M08I001

Pipes Ø 130 2,0 mm, black senotherm paint (BP)Steel pipe Ø 130 x 250 SF40M08A008Steel pipe Ø 130 x 500 SF40M08A006Steel pipe Ø 130 x 1000 SF40M08A004Three-piece elbow Ø 130 SF40M08E002Steel rosette Ø 130 SF40M08I002

Pipes Ø 150 2,0 mm, black senotherm paint (BP)Steel pipe Ø 150 x 250 SF40M08A022Steel pipe Ø 150 x 500 SF40M08A016Steel pipe Ø 150 x 1000 SF40M08A010Three-piece elbow Ø 150 SF40M08E005Steel elbow, fullform Ø 150 450x700 90° MB SF40M08E019Steel rosette Ø 150 SF40M08I004

Pipes Ø 160 2,0 mm, black senotherm paint (BP)Steel pipe Ø 160 x 250 SF40M08A034Steel pipe Ø 160 x 500 SF40M08A031Steel pipe Ø 160 x 1000 SF40M08A028Three-piece elbow Ø 160 SF40M08E009Steel rosette Ø 160 SF40M08I009

6 76 7

Dimensions in mmPipes covered with black senotherm paint (BP)

Thickness of walls 2 mm IndexPipes Ø 180 2,0 mm, black senotherm paint (BP)Steel pipe Ø 180 x 250 SF40M08A076Steel pipe Ø 180 x 500 SF40M08A077Steel pipe Ø 180 x 1000 SF40M08A078Steel elbow Ø 180 x 700 x 450 90° SF40M08E026Steel elbow Ø 180 x 700 x 450 90° with damper SF40M08E027Steel rosette Ø 180 SF40M08I022

Pipes Ø 200 2,0 mm, black senotherm paint (BP)Steel pipe Ø 200 x 250 SF40M08A069Steel pipe Ø 200 x 500 SF40M08A068Steel pipe Ø 200 x 1000 SF40M08A067Steel elbow Ø 200 x 700 x 450 90° SF40M08E025Steel elbow Ø 200 x 700 x 450 90° with damper SF40M08E024Steel rosette Ø 200 SF40M08I019

Enamelled pipesThickness of walls 0,6 mm Index

Pipes Ø 150 0,6 mm, ivory enamel (IVE)Enamelled pipes are intended for installation of enamelled free standing stovesSteel pipe Ø 150 x 250 SF40M08A024Steel pipe Ø 150 x 500 SF40M08A018Steel pipe Ø 150 x 1000 SF40M08A012Ribbed steel elbow Ø 150 45° SF40M08G013Ribbed steel elbow with cleanout Ø 150 45° SF40M08G021Ribbed steel elbow Ø 150 90° SF40M08G001Steel rosette Ø 150 SF40M08I005

Pipes Ø 150 0,6 mm, white enamel (WHE)Steel pipe Ø 150 x 250 SF40M08A072Steel pipe Ø 150 x 500 SF40M08A071Steel pipe Ø 150 x 1000 SF40M08A070Ribbed steel elbow Ø 150 45° SF40M08G016Ribbed steel elbow with cleanout Ø 150 45° SF40M08G017Ribbed steel elbow Ø 150 90° SF40M08G014Steel elbow, fullform Ø 150 450 x700 90° MB SF40M08G015Steel rosette Ø 150 SF40M08I020

Pipes Ø 150 0,6 mm, black enamel (BLE)Steel pipe Ø 150 x 250 SF40M08A073Steel pipe Ø 150 x 500 SF40M08A074Steel pipe Ø 150 x 1000 SF40M08A075Ribbed steel elbow Ø 150 45° SF40M08G022Ribbed steel elbow with cleanout Ø 150 45° SF40M08G023Ribbed steel elbow Ø 150 90° SF40M08G024Steel rosette Ø 150 SF40M08I021

6 7

Dimensions in mm

6 7

Enamelled pipes

Thickness of walls 0,6 mm IndexPipes Ø 150 0,6 mm, blue-black enamel (BBE)Steel pipe Ø 150 x 250 SF40M08A050Steel pipe Ø 150 x 500 SF40M08A046Steel pipe Ø 150 x 1000 SF40M08A045Ribbed steel elbow Ø 150 45° SF40M08G018Ribbed steel elbow with cleanout Ø 150 45° SF40M08G019Ribbed steel elbow Ø 150 90° SF40M08G004Steel rosette Ø 150 SF40M08I013

Pipes Ø 150 0,6 mm, brown majolica enamel (BRM)Steel pipe Ø 150 x 250 SF40M08A061Steel pipe Ø 150 x 500 SF40M08A060Steel pipe Ø 150 x 1000 SF40M08A059Ribbed steel elbow Ø 150 45° SF40M08G009Ribbed steel elbow with cleanout Ø 150 45° SF40M08G010Ribbed steel elbow Ø 150 90° SF40M08G008Steel rosette Ø 150 SF40M08I017

Pipes Ø 150 0,6 mm, green majolica enamel (GRM)Steel pipe Ø 150 x 250 SF40M08A066Steel pipe Ø 150 x 500 SF40M08A065Steel pipe Ø 150 x 1000 SF40M08A064Ribbed steel elbow Ø 150 45° SF40M08G012Ribbed steel elbow with cleanout Ø 150 45° SF40M08G020Ribbed steel elbow Ø 150 90° SF40M08G011Steel rosette Ø 150 SF40M08I018

Green majolica enamelBrown majolica enamelBlue-black enamelIvory enamel

8 9

Dimensions in mm

Steel connector Ø 173 / Ø 160 x 120

Steel connector Ø 200 x 160 for Ø 200 pipes

Steel reduction Ø 200 / Ø 180 x 160

Steel reduction Ø 200 / Ø 180 x 160

Thickness of walls 2 mm IndexSteel pipe reductionsReductions adjust the pipes’ diameter. Made of painted black steel sheet.Steel reduction Ø 180 / Ø 150 x 160 SF40M08H011Steel reduction Ø 180 / Ø 160 x 160 SF40M08H013Steel reduction Ø 200 / Ø 160 x 160 SF40M08H002Steel reduction Ø 200 / Ø 180 x 160 SF40M08H004Steel reduction Ø 250 / Ø 200 x 160 SF40M08H007

Steel pipe connectorsThe connectors enable linking pipes cut-offs without clasping element. Made of painted black steel sheet.Steel connector Ø 180 x 160 for pipes Ø 180 TS40H010Steel connector Ø 200 x 160 for pipes Ø 200 TS40H015

Stoves and fireplace inserts connectorsEnable linking pipe connectors with pipes of a standard diameters. Made of painted black steel sheet, ≤ Ø 173 with senotherm paint, ≥ Ø 200 protective paint.Steel connector Ø 126 / Ø 120 x 120 for Jøtul F 602 TS40H011Steel connector Ø 126 / Ø 120 x 250 for Jøtul F 602 SF40M08H006Steel connector Ø 173 / Ø 150 x 120 for Jøtul F 3 TD / Jøtul F 8 TS40H012Steel connector Ø 173 / Ø 160 x 120 for Jøtul F 3 TD / Jøtul F 8 TS40H013Steel connector Ø 173 / Ø 160 x 250 for Jøtul F 3 TD / Jøtul F 8 SF40M08H009Steel connector Ø 150 x 80 for Jøtul F 400 / Jøtul F 500 / Jøtul F 600 TS40H007Steel connector Ø 150 x 100 for Jøtul F 3 TD / Jøtul F 8 TS40H019Steel connector Ø 150 x 45 for Jøtul F 3 TS40D001Steel connector Ø 200 x 120 for Jøtul I 570 TS40H023Steel connector Ø 280 / Ø 200 x 200 for Atra inserts TS40H020Steel connector Ø 228 / Ø 250 x 200 for Atra inserts TS40H021Steel connector Ø 278 / Ø 300 x 200 for Atra inserts TS40H022


8 9

Dimensions in mm

Convection heat exchangerRadiator TS40K002Chimney conduit, prefabricated chimneys

Two-walled chimney conduit

Chimney conduits and connectors

Thickness of walls for Ø 160 - 0,6 mm,for Ø 180 - 0,8 mm

Index

Two-walled chimney conduits for brick chimneysTwo-walled chimney conduits are intended for installation inside the brick chimneys. Installing these elements compensates for thermal expansion of smoke pipes and guarantees flexible and tight chimney connection.Chimney conduit Ø 120 x 120 SF40M08J001Chimney conduit Ø 130 x 120 SF40M08J002Chimney conduit Ø 150 x 120 SF40M08J003Chimney conduit Ø 160 x 120 SF40M08J005Chimney conduit Ø 180 x 120 SF40M08J006Chimney conduit Ø 200 x 120 SF40M08J007

Two-walled chimney conduits for prefabricated chimneysUsing chimney conduits for prefabricated chimneys the prevents connecting tee from cracking. Find indentification in the reference number.Chimney conduit Ø 160 / Ø 180 SCH x 120 TS40J001Chimney conduit Ø 180 / Ø 200 SCH x 120 TS40J002

Thickness of walls 2 mm Chimney connectors for prefabricated chimneysChimney connectors link solid fuel inserts to prefabricated ceramic chimneys. Rosette chimney connectors (including TS40J009) designed for installing free standing stoves.Rosette chimney connector Ø 120 / Ø 160 SCH x 190 TS40J008Rosette chimney connector Ø 120 / Ø 180 SCH x 120 TS40J015Rosette chimney connector Ø 120 / Ø 200 SCH x 120 TS40J012Chimney connector Ø 150W / Ø 160 SCH x 160 TS40J009Rosette chimney connector Ø 150 / Ø 180 SCH x 120 TS40J016Rosette chimney connector Ø 150 / Ø 200 SCH x 120 TS40J012Chimney connector Ø 160 / Ø 180 SCH x 160 TS40J010Rosette chimney connector Ø 160 / Ø 200 SCH x 120 TS40J014Chimney connector Ø 180 / Ø 180 SCH x 160 TS40J005Chimney connector Ø 200 / Ø 180 SCH x 190 TS40J004Chimney connector Ø 200 / Ø 200 SCH x 160 TS40J003Chimney connector Ø 250 / Ø 250 SCH x 200 TS40J007

10 1110 11

Dimensions in mm

Thickness of walls 2 mm IndexPipes with draught regulation, 2,0 mmPipes with draught regulation are used in the areas with high wind-load or in the smoke duct where vacuum pressure exceeds values defined by the producer of inserts.Pipe with draught regulation Ø 150 x 250, senotherm paint cover (BP) TS40B001Pipe with draught regulation Ø 160 x 250, senotherm paint cover (BP) TS40B002Pipe with draught regulation Ø 160 x 250, protecting paint TS40C005Pipe with draught regulation Ø 180 x 250, protecting paint TS40C003Pipe with draught regulation Ø 200 x 250, protecting paint TS40C004

Tee connector with ignition flapThickness of walls 2 mm Index

Tee connector with ignition flap, 2,0 mmTee connector with ignition flap is used for connecting fireplaces to accumulating mass. This connection regulates the flow of exhaust gases which goes directly to the smoke duct of the chimney or through ducts system in the accumulating mass.Tee connector with ignition flap Ø 160 / Ø 160 / Ø 160 x 500 SF40D01O002Tee connector with ignition flap Ø 180 / Ø 180 / Ø 180 x 500 SF40D01O004Tee connector with ignition flap Ø 200 / Ø 200 / Ø 200 x 500 SF40D01O003

Radiators and heat exchangersIndex

Radiators for free standing stoves (BP)Convection-based functioning of radiators for free standing stoves enables 5-40% heat recovery from exhaust gases. They increase the heat output with lower fuel consumption. Made of steel sheet, covered with pulver paint resistant to temperatures up to 300 °C.Radiator Ø 120 for Jøtul F 602 N TS40K001Radiator Ø 150 for Jøtul F 500 / Jøtul F 600 TS40K003Radiator Ø 160 for Jøtul F 3 TD / Jøtul F 8 TS40K002

IndexConvection heat exchangersConvection heat exchanger are mounted on smoke pipes of fireplace inserts as separate elements or as a multi-piece set. They improve heat output by about 5-30% depending on exhaust gases temperature in the pipe, air temperature in distributor as well as active areas of heat exchanger. Their functioning is based on thermal convection.Convection heat exchanger Ø 150 x 230 TS40L004Convection heat exchanger Ø 180 x 240 TS40L001Convection heat exchanger Ø 200 x 270 TS40L003Convection heat exchanger Ø 200 x 370 TS40L002

Pipes with draught regulation

10 11

Dimensions in mm

10 11

External air inletRound air intakeAirvent 305 x 57 with filter

Air intake accessories

IndexAirvent Airvent serves as a source of fresh air uptake for the rooms. Made of galvanized painted white steel sheet. On the outside it is equipped with a net protecting the installation against insects and rodents. Additionally, it is furnished with a canopy preventing rainfall from entering the duct. On the inside, there is a silencer, a dust filter and a regulating shutter.Airvent is easily adjustable to any wall width.Attention! Airvent is recommended to be mounted in each and every room, especially in those with fireplace in.Airvent with filter 305 x 57, white SF46D01I001

Air intakeMade of painted white galvanized steel sheet. On the outside it is equipped with a net protecting the installation against insects and rodents. Additionally, it is furnished with a canopy preventing rainfall from entering the duct. Air intake is furnished with partition walls which prevents negative consequences of wind blows.Round stainless steel air intake VLA-100 SF46C02H001Round white air intake CZNP 110 SF46D01H001Rectangular white air intake CZNP 150x50 SF46D01H002

Thickness of walls 0,5 mm Air inlet elbowMade of galvanized steel sheet. They connect aluminum pipes to the cast iron air inlet flanges which lead to fireplace insert.Elbow Ø 80 / 90° for Jøtul I 18 / Jøtul I 510 TS44N001Elbow Ø 80 / 90° for Jøtul I 350 / Jøtul I 570 TS44N002

External air inletExternal air inlet for quick setup. The set consists of external plastic grate, flexible Aluspiro pipe, isolating duct and clamp hoop.External air intake for Jøtul stoves, 1 m 51012164

12 13

Dimensions in mm

Cross choke valve with double regulation

Tee choke valve with regulation

Choke valve with regulation

Air intake accessories

Thickness of walls 0,5 mm IndexChoke valves with regulationMade of galvanized steel sheet. They regulate external air flow below / into a stove or fireplace insert.Choke valve Ø 75 / Ø 75 with flexible regulation TS44F001Choke valve Ø 100 / Ø 100with flexible regulation TS44F003Choke valve Ø 110 / Ø 100 with flexible regulation TS44F004

Tee choke valve with regulationMade of galvanized steel sheet painted black with pulver paint. They regulate external air flow below / into a stove or fireplace insert.Choke valve Ø 100 / Ø 60 / Ø 60 with flexible regulation TS44H021Choke valve Ø 100 / Ø 80 / Ø 80 with flexible regulation TS44H005Choke valve Ø 102 / Ø 80 / Ø 80 with flexible regulation TS44H018Choke valve Ø 105 / Ø 80 / Ø 80 with flexible regulation TS44H011

Cross choke valve with double regulationMade of galvanized steel sheet painted black with pulver paint. They regulate external air flow below / into a stove or fireplace insert.Choke valve Ø 102 / Ø 80 / Ø 80 / Ø 80 with double flexible regulation TS44J004Choke valve Ø 105 / Ø 60 / Ø 60 / Ø 60 with flexible regulation TS44J006

Cross choke valve with regulationMade of galvanized steel sheet painted black with pulver paint. They regulate external air flow below / into a stove or fireplace insert.Designed for Jøtul I 18, Jøtul I 530, Jøtul I 570. Quick and easy handling by means of one flexible rod.Choke valve Ø 100 / Ø 80 / Ø 80 / Ø 80 with flexible regulation TS44J007

12 13

Dimensions in mmElectronic flame controllers

IndexElectronic flame controllerElectronic flame controllers (ERS) navigates the combustion process starting from the ignition stage to finish with the extinction. Controller ERS 01 is intended for navigating inserts and stoves. A set of combustion modes dedicated for and adjusted to each and every model of stove and Jøtul’s inserts makes it an outstanding feature of this product.

With the first activation of the product, the controller takes over all the functions responsible for regulating the amount of air required to achieve and maintain appropriate combustion conditions. Therefore in accordance with the set mode, the controller ignites, maintains the temperature withinthe values of ± 10 °C and extinguishes fire in the fireplace. Electronic flamecontroller ERS informs the user about lack of fuel or too low temperature ofexhaust gases. It also alarms about fireplace’s overheating. When the burning cycle is over, the choke valve is shut down in order to prevent the fireplace and the accumulating mass HSS from cooling down.Electronic flame controller ERS-1 for free standing stoves and Jøtul’s fireplace inserts, remote control included

SF55P11I010

Electronic flame controller ERS-2 for Jøtul’s fireplace inserts with water exchanger, remote control included

SF55P11I011

13

14 15

Dimensions in mm

1

2

1. Connector of Spiro pipes2. Connector of Spiro fitting pipes

Reduction of Spiro pipes on a distributor

Reduction of Spiro pipes

Pipe fitting heating system

IndexPipe fitting system, which consists of wound smooth-walled Spiro pipes, elbows and tees, characterizes with the lowest air flow resistance. Isolation made of 2cm thick mineral or glass wool, placed on aluminum foil prevents from heat losses. The elements of the system are mounted together with the use of Spiro pipe connectors. The pipe fitting system is based on 125 and 160mm diameter pipes.

The pipe fitting system is recommended to be used in the horizontal position up to 10m distance. The system’s effectiveness decreases with the increase of the number of elbows and fitting systems used. Each and every heating system installation is to be treated as separate. Untypical building conditions may force the necessity of varied systems. On selecting the most effective one, we should remember to use the element with the lowest flow resistance.

Periodical installation cleaning is highly recommended. Cleaning of shorter sections can be performed with the use of round vacuum cleaner’s brush. As for longer sections, cleaning ought to be commissioned to a company specializing in ventilation and air conditioning systems.

Fitting pipe heating systemSpiro pipe Ø 125 x 1500 SF44C02D003Spiro pipe connector Ø 125 TS44K004Spiro pipe fitting connector Ø 125 TS44K005Spiro pipe 30° elbow Ø 125 SF44K01C002Spiro pipe 45° elbow Ø 125 SF44K01C003Spiro pipe 90° elbow Ø 125 SF44K01C004Reducing Y-piece Ø 100 / Ø 80 / Ø 80 SF44D01E002Reducing Y-piece Ø 125 / Ø 100 / Ø 100 SF44D01E003Reducing Y-piece Ø 125 / Ø 125 / Ø 125 SF44D01E004Reducing Y-piece Ø 150 / Ø 125 / Ø 125 SF44D01E005Reducing Y-piece Ø 150 / Ø 150 / Ø 150 SF44D01E006Spiro pipe reduction Ø 100 / Ø 80 x 100 SF44K01D001Spiro pipe reduction Ø 125 / Ø 100 x 100 SF44K01D003Spiro pipe reduction Ø 150 / Ø 125 x 100 SF44D01D001Spiro pipe reduction Ø 160 / Ø 125 x 100 SF44K01D001

14 15

Dimensions in mm

Hot air axial fanFlange capChoke valve with flexible regulation

Rectangular / circular crossing

Aluspiro heating systems

IndexThe simplicity as well as easiness of installation contribute to the popularity of Aluspiro heating system. Expendable to a length of 2,5 m pipes are to be isolated on aluminium foil with 2 cm thick mineral wood. Longer sections are built with connectors and assembly bolts. Outlet grates with regulation mounted at the ends of Aluspiro pipes help to achieve the optimum temperature in the heated rooms. Aluspiro systems are recommended to be used in horizontal configuration up to 5 m in distance. The effectiveness of the system is reduced with the increase in the number of bends and curves. In order to minimize the air flow resistance, Aluspiro system can be coupled with fitting system i.e.: elbow pipes.

Periodical installation cleaning is highly recommended. Cleaning of shorter sections can be performed with the use of round vacuum cleaner’s brush. As for longer sections, cleaning ought to be commissioned to a company specializing in ventilation and air conditioning systems.

Aluspiro Aluflex heating systemAluflex aluminium pipe ø 80x800x3000 SF44C02B009Aluflex aluminium pipe ø 100x800x3000 SF44C02B006Aluflex aluminium pipe ø 125x800x3000 SF44C02B007Aluflex aluminium pipe ø 150x800x3000 SF44C02B008Aluflex pipe connector ø 100 x 90 TS44K001Aluflex pipe connector ø 125 x 90 TS44K002Aluflex pipe connector ø 150 x 90 TS44K006Flange cap ø 125 TS42J007Flange cap ø 150 TS42J006Flange cap ø 160 TS42J009Choke valve with flexible regulation ø 125 / ø 125 TS44L003Choke valve with flexible regulation ø 150 / ø 150 TS44L004Worm band clip ø 75 / ø 95 SF44W04G001Worm band clip ø 90 / ø 110 SF44W04G002Worm band clip ø 125 / ø 140 SF44W04G005Worm band clip ø 145 / ø 160 SF44W04G006Assembly bolt 4,2x13 (box of 100 pieces) TS97A001Aluminum tape AT-506 50 / 50 m, up to 350°C SF90A08A006Reinforced aluminum tape 50 / 50 m, up to 150°C SF90A08A007

Hot air axial fan SF48D08A001

16 17

Dimensions in mm

Rectangular / circular crossingAdjustable elbow, vertical Floor / top finish

90

Ducts connector, 90° elbow, grate

15°

15°

Ducted heating system

IndexThe system comprises of ducts and fitting pipes with 15 x 5 cm in cross- section, isolated with 2 cm thick mineral or glass wool placed on aluminum foil. This system has low air flow resistance and is easy to install. Attaching ducts and fitting systems to the ceiling or walls is carried out by means of clamp hoops. Small ducts’ dimensions enable placing them under the concrete layer or inside cardboard walls. Individual elements of duct heating system are joined together with the use of duct connectors and assembly bolts.

The duct heating system is recommended to be used in horizontal systems up to 6 m in distance.

The system’s effectiveness decreases with the increase of the amount of elbows and fitting pipes used.

Periodical cleaning is highly recommended. Cleaning of shorter sections can be performed with the use of round vacuum cleaner’s brush. As for long sections, these are to be commissioned to a company specializing in ventilation and air conditioning systems. During the process of designing the hot air heating system, it is crucial to reduce the number of elbow pipes to the essential minimum due to the existing flow resistance. Outlet grates temperature has to comply with domestic law.Ducted heating systemRectangular duct 150 x 50 x1 000 SF44D01K001Rectangular duct 150 x 50 / ø 125 with rectangular/circular adapter SF44D01K003Rectangular duct 150 x 50 duct connector SF44D01K004Rectangular 90° elbow duct 150 x 50 SF44D01K005Rectangular 45° elbow duct 150 x 50 SF44D01K008Rectangular 30° elbow duct 150 x 50 SF44D01K002Adjustable rectangular elbow duct 150 x 50, horizontal SF44D01K013Adjustable rectangular elbow duct 150 x 50, vertical SF44D01K014Y-piece rectangular duct 50 x 150 SF44D01K011Rectangular floor/wall elbow duct 150 x 50 SF44D01K009Rectangular floor/top finish duct 150 x 50 / ø 125 SF44D01K006Rectangular floor/top finish duct 150 x 50 / ø 100 SF44D01K007Soft galvanized steel assembly wire 100g SF90W02P002Aluminum tape AT-506 50 / 50 m, up to 350°C SF90A08A006Reinforced aluminum tape 50 / 50 m, up to 150°C SF90A08A007Hot air axial fan SF48D08A001

16 17

Dimensions in mm

Distributor ø 150 / 5 x ø 125 Distributor ø 150 / 7 x ø 125Choke valve for fan KOM-600 III / KOM-400 II

Air supplying diffuser

Hot air fan system

IndexIn this system hot air is pressed through the fan into a dividing box which distributes the heated air throughout the rooms. In order to dampen the fan’s operation, the system requires pipes with equal-loudness effect as well as a diffuser. Apart from the diffuser, an air filter can be used in this system, provided that it will be easily accessible during the periodical cleaning.In case of any electricity supply brakes, the system does not function. Therefore to ensure the hot air flow from the distributor, it is recommended to mount two decompression grates on ø 150 pipes which are placed in the fireplace casing.

Supplementing the system with a fan regulator enables dosing the amount and speed of pressed air, which affects the amount of noise generated by the operating installation. The hot air fan system is recommended to be used in horizontal position up to 20 m distance.

Attention! Hot air does not flow through decompression grates when the fan is working

Hot air fan systemFireplace fan KOM-600 II SF48D04F001Fireplace fan KOM-400 II SF48D04F003Fireplace fan KOM-600 III BY PASS. SF48D04F002Choke valve for fan KOM-600 II / KOM-400 II SF44D04L002Distributor ø 150 / 5 x ø 125 TS44P001Distributor ø 150 / 7 x ø 125 TS44P002Isolated filter for DGP system SF44D01H001Air supplying diffuser ø 125, white SF46C02E001Air supplying-exhaust diffuser VS ø 125, stainless steel SF46C02E005Aluminum tape AT-506 50 / 50 m, up to 350°C SF90A08A006Reinforced aluminum tape 50 / 50 m, up to 150°C SF90A08A007

18 19

Elements for heating systems

1.

2.

3.

1.

2.

3. 4.

1. Aluspiro pipe 1. Spiro pipe 4. Grate with casing2. Self-tapping screw 2. Self-tapping screw3. Top/floor duct 3. 90° Spiro elbow

1.

2.3.

4.5. 3. 4. 5. 6.

1.

2.

1. Aluspiro pipe 4. Wall elbow 1. Aluspiro pipe 4. Isolated Aluspiro pipe2. Self-tapping screw 5. Ducts’ connector 2. Self-tapping screw 5. Worm band3. Circular/rectangular crossing 3. 90° Spiro elbow 6. Grate with casing

1.

5.

6.

2. 3. 4.

4. 5. 6.

1.

2.

3.

1. Spiro pipe 4. 150x50 mm duct 1. Aluspiro pipe 4. Fan2. Top/floor duct 5. 90° elbow 2. Self-tapping screw 5. Silencer3. Ducts’ connector 6. Wall duct with grate 3. Filter 6. Grate with casing

18 19

Technical data

1.

2. 3.

3G fireplaces

The third generation of stoves and fireplace inserts (3G) is the next step to attain more effective heat recovery. Up to now there has been a huge energy loss in open fireplaces with efficiency of 15-20%, plain ones with glass door and uncontrolled air inflow (40-60%) and finally contemporary furnaces with advanced structures (more than 70% efficiency).

As opposed to older generations of products, 3G fireplaces and furnaces recover heat energy from exhaust gases. It is achieved through additional devices which are mounted between the hearth and a smoke duct. These are available convectors and radiators (1), water exchangers (2) and last but not least accumulating masses HSS (3). Therefore, using 3G heat receivers allows to obtain more energy (from 4 to 12 kW) and to save up to 30% of fuel.

It is recommended to combine 3G fireplaces with electronic flame controller ERS, which optimize the combustion process – from kindling through refueling to end up with fire extinction. Electronic flame controller ERS control the set temperature and steer the amount of air inflow required for kindling and burning process.

400oC(550oC)

tmax 70oC

tmax 70oC

tmax 40oC

tmax 120oC

tmax 120oC

tmax 300oC

tmax 550oC

tmax 60oC

14

1

3 4

6

8

9

2

5

7

10 11

12

13

Chimney connection

Fireplace insert (1) is connected to the smoke duct (2) by means of a set of transition pieces and steel pipes (3). In order to secure a safe and stable connection, one should use a chimney crossing (4) which permits flexible and tight connection of the pipes with the chimney.Fireplace insert is provided with fresh air needed for combustion by a 100mm diameter pipe (5). By using a choke valve with flexible regulation (6) it is possible to dose the amount of air for a correct combustion process. Exhaust gases are carried off the insert’s combustion chamber (1) and led to the smoke duct (2).

Hot air distribution

Operation of heating system is based on using convection heat. The air (7) warmed to room temperature flows under the fireplace insert (1) and is heated up in the space between fireplace’s body and its cover (8). Heated air flows up towards the top part of a distributor (9) and then divides. Next the heated air flows into the rooms through aluminum Spiro pipes (10), galvanized pipes (11) and ducts (12). The pipes’ and ducts’ outlets are furnished with wall grates with regulation, which dispense the appropriate amount of heated air into the rooms. However, there are also wall grates without regulation (13) and these are installed on the fireplace’s surrounding. In order to prevent the surrounding from cracking when it is adjacent to a wall, it is necessary to ventilate the space above the hot air distributor with the use of the grate (14).

20 21

Technical data

5

43

2 1

Water solutions

The idea of water solutions assumes that heat needed for water heating can be obtained only from exhaust gases. This allows to retain high temperature in the combustion chamber while reducing the temperature of exhaust gases. Water solution can work with radiators and floor heating systems fed by heat pumps, solar panels and central heating stoves which work on solid fuel, gas, oil and electricity. Water solution can be also used as a single heat source as well as a municipal water heater. The best heating results are achieved by combination of water solution with central heating and municipal water heating systems through a buffer tank.

Water exchanger with combustion tubes

Water exchanger for Jøtul I 18 (1) is made of cylindrical steel sheet with a system of combustion tubes inside (2). Exhaust gases heat up water which flows into the system through the inlet (4) situated in the bottom part of the exchanger. Heated water is received in the top part of water solution by means of a flange (5). Then vermiculite baffle plate dispenses equal portions of exhaust gases and directs them to each and every combustion tube.

Complete nominal heat output of water solution for Jøtul I 18 amounts to 24 kW (9 kW with water exchanger) or 25 kW (11 kW with water exchanger).

2

6

1

5

3

4

Water exchanger with settling tank for solid particles

Water exchanger for Jøtul I 570 (1) is made of double-walled cylindrical steel sheet. Between the walls of water exchanger there is a space which can hold around 16 dm3 of water. Vermiculite baffle plate (4) together with ceramic settling tank for solid particles installed coaxially, form secondary combustion chamber. Exhaust gases with the temperature of 300C flow (2) between the ceramic settling tank and double-walled steel cylinder. This flow heats up water (5) and cools down exhaust gases to 200 °C. Heated water is collected in the top part of the exchanger and directed into the heating system (6).

Complete nominal heat output of water solution for Jøtul I 570 amounts to 25 kW, with 11 kW for water exchanger.

Water exchanger for Jøtul I 530 / Jøtul I 80 RH inserts has the same structure. Nominal power of the above exchanger amounts to 9 kW.

Each water exchanger is accompanied by a brush which shape corresponds to the cross-section of gas flues (important for smooth cleaning).

20 21

Technical data

Accumulating mass HSS

Accumulating heat exchangers (Heat Storage System - HSS) are made of ceramic materials with big heat storage capac-ity. Their function is to recover and accumulate energy from exhaust gases. HSS consists of several elements (with total weight ranging from 70 to 200kg) and adapters, which allow HSS to be connected to both the hearth and smoke pipes. Heat accumulating HSS elements heat up during the process of combustion. Next they cool down and emit accumulated heat once the cycle is over. Using HSS system in the instal-lation, lengthens heating stage of a fireplace or stove by several hours. In effect, the temperatures in heated rooms are more equaled.

Accumulating mass HSS 07

Accumulating mass HSS 07 consists of five ceramic discs with a complex duct in the centre. Joints of particular elements are isolated by means of glass wool rope and four bolts. Made of refractory concrete (with scattered steel reinforce-ment) and magnetite compounds, fitting pipes boost ther-mal conductivity and heat accumulating capacity.

Apparent density: 2,85 g/cm³Weight: about 150 kgHeight: 590 mmDiameter: 455 mmHeat recovery: about 5 - 8 kWh

Accumulating masses

HSS 02 / HSS 03 / HSS 04 / HSS 05 / HSS 08 / HSS 09HSS elements are made of ceramic mass of magnetite com-pounds with apparent density which amounts to 2,82g / cm3 . Depending on the model, the system comprises of three to seven ceramic fitting pipes and a steel adapter which is customized to particular Jøtul fireplace insert. Considerable freedom in customizing the ultimate shape of exchanger is one of the greatest advantages of the system. The user can choose from circular and elliptic fitting pipes with different weight and different accumulating capacity.Due to MgO content, the fitting pipes are mounted on smoke pipes. Tightness of the installation is provided on particular segments of pipes.

Apparent density: 2,82 g/cm³Weight: 65 - 125 kgHeight: 350 - 630 mmDiameter: 320 - 504 mmHeat recovery: about 4 - 7 kWh

22 23

Dimensions in mm

Supporting fan for fireplace inserts

Low decorative frame Low decorative INOX frameDecorative frame

Distributor w/top outlet

Accessories for Jøtul I 570

IndexAccessories for Jøtul I 570


ø 200x120 connecting pipe for Jøtul I 570 TS40H023Choke valve Ø 102 / Ø 80 / Ø 80 with flexible regulation TS44H018Elbow Ø 80 / 90° for Jøtul I 570 TS44N002S-Flex aluminum pipe ø 80 x 800 x 3000 SF44C02B009Electronic flame controller ERS-01 for Jøtul I 570, remote control incl. SF55P11I010Electronic flame controller ERS-02 for Jøtul I 570 with water exchanger, remote control included

SF55P11I011

Water exchanger for Jøtul I 570 TS43C001Accumulating mass HSS 04 for Jøtul I 570 (elliptic) TS49B004Accumulating mass HSS 08 for Jøtul I 570 (circular) TS49B008Bottom accumulating mass element HSS 04 / HSS 08 SF90R03D009Top elliptic accumulating mass element HSS 04 SF90R03D010Top circular accumulating mass element HSS 08 SF90R03D007Additional glass for Jøtul I 570 (set for water exchanger) TS39B002

Water solution Jøtul I 570

Distributor for Jøtul I 570 w/water exchanger/radiator/accumulating mass (2xØ150, 6xØ125)

TS42A007

Distributor for Jøtul I 570, top outlet (2xØ150, 4xØ125) TS42H010Convection heat exchanger ø 200 x 370 TS40L002Convection heat exchanger ø 200 x 270 TS40L003Supporting fan for fireplace inserts TS48C001Ash pan for Jøtul I 570 TS39A001Soapstone surrounding Jøtul FS 166 for Jøtul I 570 50013006Decorative frame for Jøtul I 570 50013035Low decorative frame for Jøtul I 570 TS80C012Low decorative INOX frame for Jøtul I 570 TS80D014Decorative side trims for Jøtul I 570 TS55G005Barbecue grate for Jøtul I 570 TS55A006

22 23

Dimensions in mm

Barbecue grateFresh air heater for Jøtul I 18Accumulating mass HSS 07Decorative side frame with Breccia shelf




Choke valve Ø 102 / Ø 80 / Ø 80 with flexible regulation TS44H018Elbow Ø 80 / 90° for Jøtul I 18 TS44N001S-Flex aluminum pipe ø 80 x 800 x 3000 SF44C02B009Fresh air heater for Jøtul I 18 TS39B003Electronic flame controller ERS-01, with remote control, for Jøtul I 18 SF55P11I010Electronic flame controller with water exchanger ERS-02, with remote control, for Jøtul I 18

SF55P11I011

Convection heat exchanger ø 200 x 370 TS40L002Convection heat exchanger ø 200 x 270 TS40L003Water exchanger for Jøtul I 18, 9 kW TS43A001Water exchanger for Jøtul I 18, 12 kW TS43A002Accumulating mass HSS 07 for Jøtul I 18 TS49B007Accumulating mass element HSS 07 for Jøtul I 18 SF90R003D011Connection set for accumulating mass HSS 07 TS49B001Distributor for Jøtul I 18, w/water exchanger/radiator/accumulating mass (2xØ150, 6xØ125

TS42A013


Distributor for Jøtul I 18, (2xØ150, 6xØ125) TS42A001Distributor for Jøtul I 18 w/radiator, (2xØ150, 6xØ125) TS42E002Distributor for Jøtul I 18 w/radiator and DGP, (3xØ150) TS42G002Distributor for Jøtul I 18 w/top outlet, (2xØ150, 6xØ125) TS42H002Supporting fan for fireplace inserts TS48C001Ash pan for Jøtul I 18 51012081Fire trim for Jøtul I 18 12016044Low decorative frame for Jøtul I 18 TS80C007Low decorative INOX frame for Jøtul I 18 TS80D007Decorative frame for Jøtul I 18 w/stone shelf (stone shelf excl.) TS80C006Stone shelf for frame for Jøtul I 18 marble Beccia SF80M13A001Stone shelf for frame for Jøtul I 18 black granite SF80M13A003Decorative side trims for Jøtul I 18 TS55G006

Barbecue grate for Jøtul I 18 TS55A001

Decorative side trims

24 25

Dimensions in mm

Accumulating mass HSS 05Ash pan with fresh air inletLow decorative frameDecorative INOX frame

Accessories for Jøtul I 80 / Jøtul I 530

IndexAccessories for Jøtul I 80 / Jøtul I 530


Ash pan with fresh air inlet for Jøtul I 80 / Jøtul I 530 TS340732Top air intake for Jøtul I 530 TS39C001Double choke valve ø 100 / ø 80 / ø 80 / ø 80 with flexible regulation TS44J007Water exchanger for Jøtul I 80 RH / Jøtul I 530 TS43B001Accumulating mass HSS 05 for Jøtul I 80 / Jøtul I 530 (elliptic) TS49B005Accumulating mass HSS 09 for Jøtul I 80 / Jøtul I 530 (circular) TS49B009Top elliptic accumulating mass element HSS 05 SF90R03D010Top circular accumulating mass element HSS 09 SF90R03D007Distributor for Jøtul I 80 / Jøtul I 530, (2xØ150, 5xØ125) TS42A004Distributor for Jøtul I 80 / Jøtul I 530, w/water exchanger/accumulating mass (2xØ150, 5xØ125)

TS42A015

Distributor for Jøtul I 80 / Jøtul I 530, w/radiator and the frame (2xØ150, 5xØ125)

TS42E005

Distributor for Jøtul I 80 / Jøtul I 530 w/top outlet, (2xØ150, 2xØ125) TS42H008


Convection heat exchanger ø 200 x 370 TS40L002Convection heat exchanger ø 200 x 270 TS40L003Soapstone surrounding Jøtul FS 165 for Jøtul I 530 50013005Jøtul Cube GL surrounding for Jøtul I 530 50038167Jøtul Cube GG surrounding for Jøtul I 530 50038168Jøtul Cube AL surrounding for Jøtul I 530 50038169Jøtul Cube AG surrounding for Jøtul I 530 50038170Jøtul Cube GG WS surrounding for Jøtul I 530 50038171Jøtul Cube GL WS surrounding for Jøtul I 530 50038172Aluminium back decor for Jøtul Cube 10038311Back cage grill for Jøtul Cube 10038354Suspended fireplace set for Jøtul Cube 50043349Suspended firewood box for Jøtul Cube 50043350Glass floor panel for Jøtul Cube 50043365

Top air inlet (intake)

Glass floor panel for Jøtul Cube WS 50043366Additional glass for Jøtul I 530 51012308Decorative frame for fireplace surrounding Jøtul FS 165 50013007Low decorative frame for Jøtul I 530 TS80C009Low decorative INOX frame for Jøtul I 530 TS80D009Decorative side trims for Jøtul I 530 TS55G004Barbecue grate for Jøtul I 80 / Jøtul I 530 TS55A002

24 25

Dimensions in mm

Jøtul Cube fireplace equipment kit

Decorative trims Accumulating mass HSS 09

Accessories for Jøtul I 200 / Jøtul I 500

IndexAccessories for Jøtul I 200 / Jøtul I 500


Distributor for Jøtul I 200 / Jøtul I 500, (2xØ150, 5xØ125) TS42A012Distributor for Jøtul I 200 / Jøtul I 500 w/radiator/accumulating mass (2xØ150, 5xØ125)

TS42E004

Distributor for Jøtul I 200 / Jøtul I 500 w/top outlet (2xØ150, 2xØ125) TS42H003Water exchanger for Jøtul I 200 / Jøtul I 500 TS43B001Accumulating mass HSS 05 for Jøtul I 200 / Jøtul I 500 (elliptic) TS49B005Accumulating mass HSS 09 for Jøtul I 200 / Jøtul I 500 (circular) TS49B009Top elliptic accumulating mass element HSS 05 SF90R03D010Top circular accumulating mass element HSS 09 SF90R03D007Convection heat exchanger ø 180 x 240 TS40L001Ash pan for Jøtul I 200 / Jøtul I 500 51012053Soapstone surrounding Jøtul FS 164 for Jøtul I 200 50026940Soapstone surrounding Jøtul FS 165 for Jøtul I 500 50013005Decorative frame for fireplace surrounding Jøtul FS 165 50013007

Jøtul Cube GL for Jøtul I 500

Jøtul Cube GL surrounding for Jøtul I 200 / Jøtul I 500 50038167Jøtul Cube GG surrounding for Jøtul I 200 / Jøtul I 500 50038168Jøtul Cube AL surrounding for Jøtul I 200 / Jøtul I 500 50038169Jøtul Cube AG surrounding for Jøtul I 200 / Jøtul I 500 50038170Jøtul Cube GG WS surrounding for Jøtul I 200 / Jøtul I 500 50038171Jøtul Cube GL WS surrounding for Jøtul I 200 / Jøtul I 500 50038172Aluminium back decor for Jøtul Cube 10038311Back cage grill for Jøtul Cube 10038354Suspended fireplace set for Jøtul Cube 50043349Suspended firewood box for Jøtul Cube 50043350Glass floor panel for Jøtul Cube 50043465Glass floor panel for Jøtul Cube WS 50043466Additional glass for Jøtul I 500 51012308

Decorative side trims for Jøtul I 500 TS55G004

Jøtul Cube firewood box

26 27

Dimensions in mm

Jøtul FS 350 casing Decorative frame GP Accumulating mass HSS 02 Convection heat exchanger

Accessories for Jøtul I 80 Maxi

IndexAccessories for Jøtul I 80 Maxi

Convection heat exchanger

Distributor for Jøtul I 80 Maxi, (2xØ150, 5xØ125) TS42A012Distributor for Jøtul I 80 Maxi w/radiator/accumulating mass (2xØ150, 5xØ125) TS42E004Distributor for Jøtul I 80 Maxi w/top outlet (2xØ150, 2xØ125) TS42H003Water exchanger for Jøtul I 80 Maxi TS43B001Accumulating mass HSS 05 for Jøtul I 80 Maxi (elliptic) TS49B005Accumulating mass HSS 09 for Jøtul I 80 Maxi (circular) TS49B009Top elliptic accumulating mass element HSS 05 SF90R03D010Top circular accumulating mass element HSS 09 SF90R03D007Convection heat exchanger ø 180 x 240 TS40L001Cast iron eccentric flange ø 200 51012334Ash pan for Jøtul I 80 Maxi 51012053Decorative side trims for Jøtul I 80 Maxi TS55G004

Accessories for Jøtul I 350 FL

IndexAccessories for Jøtul I 350 FL


Choke valve ø 75 / ø 75 with flexible regulation TS44F001Elbow ø 80 / 90° for Jøtul I 350 TS44N002S-Flex aluminum pipe ø 80 x 800 x 3000 SF44C02B009Fresh air inlet for Jøtul I 350 50012913Electronic flame controller ERS-01 for Jøtul I 350, remote control incl. SF55P11I010Accumulating mass HSS 02 for Jøtul I 350 TS49B002Distributor for Jøtul I 350 w/accumulating mass (2xØ150, 4xØ125) TS42A006Distributor for Jøtul I 350 w/top outlet (2xØ150, 2xØ125) TS42H007Soapstone surrounding FS 350 for Jøtul I 350 FL 50012965Decorative frame for Jøtul I 350 FL GP TS80C013

26 27

Dimensions in mm

Double choke valve with flexible regulation

Fresh air inlet for Jøtul I 400 Decorative INOX frame for Jøtul I 400

Fresh air inlet with steel pipe



Distributor for Jøtul I 150

Choke valve ø 100 / ø 100 with flexible regulation TS44F003Distributor for Jøtul I 150, (5xØ125) TS42A005Distributor for Jøtul I 150 w/top outlet (4xØ125) TS42H006Ash pan for Jøtul I 150 51012219

Accessories for Jøtul I 400Index


Jøtul I 400 FL with distributor

Fresh air inlet for Jøtul I 400 51012160Fresh air inlet for Jøtul I 400, with steel pipe TS44R001Accumulating mass HSS 03 for Jøtul I 400 TS49B003Distributor for Jøtul I 400, (2xØ150, 5xØ125) TS42A014Distributor for Jøtul I 400 w/top outlet (2xØ150, 2xØ125) TS42H009Soapstone surrounding Jøtul FS 164 for Jøtul I 400 FL 50026940Soapstone surrounding Jøtul FS 121 for Jøtul I 400 PA / Jøtul I 400 HA 30023101Ash pan for Jøtul I 400 TS80D012

28 29

Dimensions in mm

AutoManuell

On

+

Electronic flame controller ERS - 01

Fan for Jøtul F 260 SeriesFireplace set mounted in Jøtul F 260

Jøtul F 163 Cconvection version

Accessories for Jøtul F 160 Series

IndexAccessories for Jøtul F 160 Series

Jøtul F 163 WHE

Fresh air inlet for Jøtul F 160 Series, 1 m 51012164Masking frame of fresh air inlet for Jøtul F 162 / Jøtul 163 51012329Electronic flame controller ERS-01 for Jøtul F 160 Series, remote control incl. SF55P11I010Top plate for Jøtul F 160 Series, soapstone 51012327

Accessories for Jøtul F 260 SeriesIndex


Jøtul F 263 S (soapstone)

Fresh air inlet for Jøtul F 260 Series, 1 m 51012164Electronic flame controller ERS-01 for Jøtul F 260 Series, remote control incl. SF55P11I010Back-up fan for Jøtul F 260 Series 50036914Top panel for Jøtul F 260 Series, soapstone 50036901

28 29

Dimensions in mm

Barbecue grate for Jøtul F 360 / Jøtul F 370

Firewood boxTop soapstone panelRevolving mechanism


IndexAccessories for Jøtul F 360 Series

Jøtul F 365 High Top

Fresh air inlet for Jøtul F 360 Series, 1 m 51012164Electronic controller ERS-01 for Jøtul F 360 Series, remote control incl. SF55P11I010Accumulating mass HSS for Jøtul F 360 HT, a 6-piece set 10026701High Top BP cover plate 51012304Top panel for Jøtul F 360 Series, soapstone 50012988Glass panels for Jøtul F 360 BP w/back outlet 51012250Decorative glass panel for Jøtul F 360 BP w/top outlet 51012252Revolving mechanism for Jøtul F 360 Series 51012254Self-closing mechanism for Jøtul F 360 Series 51012255Barbecue grate do Jøtul F 360 Series TS55A007Fireplace surrounding Jøtul FS 162 for Jøtul 360 Series, 158cm 30023252Convection panels for Jøtul F 360 Series 10038278Firewood box for Jøtul F 364 BP 50012995

Accessories for Jøtul F 370 SeriesIndex


Jøtul F 377 (soapstone)

Fresh air inlet for Jøtul F 370 Series, 1 m 51012164Electronic controller ERS-01 for Jøtul F 370 Series, remote control incl. SF55P11I010Accumulating mass HSS do Jøtul F 370 HT, a 6-piece set 10026701High Top BP cover plate 51012304Top panel for Jøtul F 370 Series, soapstone 50012988Glass panels for Jøtul F 370 BP w/back outlet 51012250Glass panels for Jøtul F 370 GP w/back outlet 51012251Decorative glass panel for Jøtul 370 BP w/top outlet 51012252Decorative glass panel for Jøtul 370 GP w/top outlet 51012253Revolving mechanism for Jøtul F 370 Series 51012254Self-closing mechanism for Jøtul F 370 Series 51012255Barbecue grate do Jøtul F 370 Series TS55A007Fireplace surrounding Jøtul FS 162 for Jøtul 370 Series, 158cm 30023252Convection panels for Jøtul F 370 Series 10038278Firewood box for Jøtul F 374 BP 50012995Firewood box for Jøtul F 374 GP 50012996

30 31

Dimensions in mm

Barbecue grateBack-up fan for radiatorHot plate for Jøtul F 3 TD / Jøtul F 8 TD

Jøtul F 3 TD with accumulating mass

Accessories for Jøtul F 3

IndexAccessories for Jøtul F 3

Łącznik do Jøtul F 3 IVE

Connector ø 150 for enamelled fireplace Jøtul F 3 (production after 01.2012) TS40H025

Accessories for Jøtul F 3 TD, Jøtul MF 3, Jøtul F 8 TDIndex

Accessories for Jøtul F 3 TD, Jøtul MF 3, Jøtul F 8 TD

Jøtul F 3 TD with radiator

Connecting set for Jøtul F 3 TD / Jøtul F 8 TD w/back outlet SF40M08M001Connecting set for Jøtul F 3 TD / Jøtul F8 TD w/top outlet SF40M08M002Connecting pipe ø 150 for Jøtul F 3 TD / Jøtul F 8 TD TS40H019Radiator ø 160 for Jøtul F 3 TD / Jøtul F 8 TD TS40K002 Back-up fan for radiator for Jøtul F 3 TD / Jøtul F 8 TD TS48C003

Accumulating mass HSS 06 for Jøtul F 3 TD / Jøtul F 8 TD TS40B006

Connecting pipe ø160 for accumulating mass HSS 06 TS40H024

Barbecue grate do Jøtul F 3 TD / Jøtul F 8 TD TS55A003

Hot plate for Jøtul F 3 TD / Jøtul F 8 TD TS55Z001

30 31

Dimensions in mm

Fresh air regulator CBTop panel for Jøtul F 500, soapstone

Jøtul F 500 with top panel soapstone

Jøtul F 602 N Glass Door

IndexAccessories for Jøtul F 602 N

Jøtul F 602 N with radiator

Glass door for Jøtul F 602 N BP 51012041Conical reduction pipe ø 126/120 x 120 mm TS40H011Radiator ø 120 for Jøtul F 602 N TS40K001

Accessories for Jøtul F 400, Jøtul F 500, Jøtul F 600

Accessories for Jøtul F 400, Jøtul F 500, Jøtul F 600

Jøtul F 500 with radiator

Air connector for Jøtul F 400 / Jøtul F 500 / Jøtul F 600 50012842Connecting pipe ø 150x80 TS40H007Fresh air regulator CB for Jøtul F 400, ø 80 TS44L007Fresh air regulator CB for Jøtul F 500, ø 75 TS44L008Fresh air regulator CB for Jøtul F 600, ø 98 TS44L006Radiator ø 150 for Jøtul F 500 / Jøtul F 600 TS40K003Top panel for Jøtul F 500, soapstone 50012992

Accessories for Jøtul F 602 N

32 33

Dimensions in mmFloor panels painted with black pulver paint

Thickness 1,25 mm A B Index

A

B

500 700 Angles rounding radius = 100 mm 51014041






A

B 600 1100 Angles rounding radius = 100 mm 51014044


A

B 800 1000 Arc radius = 850 Rounded angles = 100 mm

51014040

A

B 700 900 Arc radius = 350 mm 51014047

800 1000 Arc radius = 400 mm 51014052

A

B 800 1000 Arc radius = 400

Air inlet prepared

51014036

A

B

D

700 950 Front element dimensions = 150+400+150 51014048

800 1000 Front element dimensions = 150+500+150 51014053

B

A


A

B 1100 1100 Front element dimensions: 600+707+600 51014038

A

B 900 800 Radius of a circle = 450 mm 51014050

32 33

Dimensions in mmFloor panels painted with black pulver paint


A


1100 1330 Radius of a circle = 550 mm 51014054

A

B 1000 1207 Radius of a circle=500 mm

Air inlet prepared

51014055

A

B 670 903 Floor panel for Jøtul FS 281

Air inlet prepared

51013586

A

B 698 860 Floor panel for Jøtul F 370 Series

Air inlet prepared

51013579

A

B 881 890 Floor panel for Jøtul F 470 Series

Air inlet prepared

51013587

33

34 35

Dimensions in mmFloor panels painted with grey pulver paint


B

D 900 800 Radius of a circle = 450 mm 51014067

B



B

D 1000 1207 Radius of a circle=500

Air inlet prepared

51014075

B

D 698 860 Floor panel for Jøtul F 370 Series

Air inlet prepared

51013580

34

34 35

Dimensions in mmFloor panels made of clear chilled glass

Thickness 6 mm A B Index.

A

B









A

B 1000 1200 Two rounded angles Radius = 100 mm

50027549

A

B

700 900 Radius = 20 - 1200 - 20 mm 50027554

800 1000 Radius = 20 - 1200 - 20 mm 50027552

1000 1200 Radius = 20 - 1200 - 20 mm 50027553

A

B

700 900 Arc radius = 350 mm 50027468

800 1000 Arc radius = 400 mm 50027467

1000 1200 Arc radius = 500 mm 50027548

A

B 800 1000 Arc radius = 400 mm,

Air inlet prepared

50027461

36 37

Dimensions in mm


B

D 1100 1100 Front element dimensions: 600+707+600 mm 50027466

B



1200 1200 Diameter – Ø 1200 mm 50027470

1200 1200 Diameter – Ø 1200 mm

Air inlet prepared 150 mm

50027546

B

A



1000 1210 Radius of a circle = 500 mm

Air inlet prepared

50027462


A

B 698 485 Front panel for Jøtul F 370 Series 50012994

A

B 865 560 Front panel for Jøtul F 470 Series 50013032

Floor panels made of clear tempered glass

36 37

Dimensions in mmFloor panels made of clear tempered glass

Thickness 6 mm B B Index.

A

B 650 850 Angles rounding radius = 100 mmBevelled edges

50027540

800 1000 Angles rounding radius = 100 mmBevelled edges

50027543

A

B 700 900 Arc radius = 350 mmBevelled edges

50027541

800 1000 Arc radius = 400 mmBevelled edges

50027542

A

B 900 1090 Radius of a circle = 450 mmBevelled edges

50027544

1100 1330 Radius of a circle = 550 mmBevelled edges

50027545

Floor panels made of tempered glass colored brown


A

B 650 850 Angles rounding radius = 100 mm 50027535


A

B 700 900 Arc radius = 350 mm 50027536

800 1000 Arc radius = 400 mm 50027537

A


Floor panels made of tempered glass colored black


A

B 300 780 Front panel for Jøtul Cube 50043465

A

B 300 1566 Front panel for Jøtul Cube WS 50043466

38 39

Dimensions in mmWall grates

IndexFlat white grate170 x 170 mm white SF46F02D001170 x 300 mm white SF46F02D002170 x 400 mm white SF46F02D045170 x 500 mm white SF46F02D008105 x 250 mm white SF46F02D041110 x 170 mm white SF46F02D016170 x 170 mm white with regulation SF46F02C001170 x 300 mm white with regulation SF46F02C002170 x 500 mm white with regulation SF46F02C024

Flat cream grate170 x 170 mm cream SF46F02D004170 x 300 mm cream SF46F02D024170 x 400 mm cream SF46F02D073170 x 500 mm cream SF46F02D009105 x 250 mm cream SF46F02D095110 x 170 mm cream SF46F02D017170 x 170 mm cream with regulation SF46F02C006170 x 300 mm cream with regulation SF46F02C010170 x 500 mm cream with regulation SF46F02C021

Flat gilded grate170 x 170 mm gilded SF46F02D049170 x 300 mm gilded SF46F02D051170 x 400 mm gilded SF46F02D078170 x 500 mm gilded SF46F02D054105 x 250 mm gilded SF46F02D037110 x 170 mm gilded SF46F02D046170 x 170 mm gilded, with regulation SF46F02C016170 x 300 mm gilded, with regulation SF46F02C018170 x 500 mm gilded, with regulation SF46F02C022

Flat ground steel grate170 x 170 mm ground steel SF46F02D003170 x 300 mm ground steel SF46F02D006170 x 400 mm ground steel SF46F02D072170 x 500 mm ground steel SF46F02D014105 x 250 mm ground steel SF46F02D040110 x 170 mm ground steel SF46F02D027170 x 170 mm ground steel, with regulation SF46F02C003170 x 300 mm ground steel, with regulation SF46F02C005170 x 500 mm ground steel, with regulation SF46F02C045

38 39

Dimensions in mm

IndexFlat polished steel grate170 x 170 mm polished steel SF46F02D015170 x 300 mm polished steel SF46F02D007170 x 400 mm polished steel SF46F02D074170 x 500 mm polished steel SF46F02D075105 x 250 mm polished steel SF46F02D039110 x 170 mm polished steel SF46F02D076170 x 170 mm polished steel, with regulation SF46F02C007170 x 300 mm polished steel, with regulation SF46F02C012170 x 500 mm polished steel, with regulation SF46F02C031

Flat antique copper grate170 x 170 mm antique copper SF46F02D048170 x 300 mm antique copper SF46F02D050170 x 400 mm antique copper SF46F02D077170 x 500 mm antique copper SF46F02D053105 x 250 mm antique copper SF46F02D042110 x 170 mm antique copper SF46F02D025170 x 170 mm antique copper, with regulation SF46F02C015170 x 300 mm antique copper, with regulation SF46F02C017170 x 500 mm antique copper, with regulation SF46F02C020

Flat black-gold grate170 x 170 mm black-gold SF46F02D029170 x 300 mm black-gold SF46F02D030170 x 400 mm black-gold SF46F02D096170 x 500 mm black-gold SF46F02D097105 x 250 mm black-gold SF46F02D035110 x 170 mm black-gold SF46F02D093170 x 170 mm black-gold, with regulation SF46F02C014170 x 300 mm black-gold, with regulation SF46F02C032170 x 500 mm black-gold, with regulation SF46F02C055

Flat black-silver grate170 x 170 mm black-silver SF46F02D028170 x 300 mm black-silver SF46F02D091170 x 400 mm black-silver SF46F02D094170 x 500 mm black-silver SF46F02D098105 x 250 mm black-silver SF46F02D043110 x 170 mm black-silver SF46F02D026170 x 170 mm black-silver, with regulation SF46F02C013170 x 300 mm black-silver, with regulation SF46F02C034170 x 500 mm black-silver, with regulation SF46F02C059

Wall grates

40 41

Dimensions in mm

170 x 170 mm 170 x 300 mm 170 x 400 mm

Wall grates

IndexCrowned white grate170 x 170 mm crowned white SF46F02D018170 x 300 mm crowned white SF46F02D021170 x 400 mm crowned white SF46F02D079170 x 500 mm crowned white SF46F02D080105 x 250 mm crowned white SF46F02D034170 x 170 mm crowned white, with regulation SF46F02C026170 x 300 mm crowned white, with regulation SF46F02C062170 x 500 mm crowned white, with regulation SF46F02C064

Crowned cream grate170 x 170 mm crowned cream SF46F02D019170 x 300 mm crowned cream SF46F02D022170 x 400 mm crowned cream SF46F02D081170 x 500 mm crowned cream SF46F02D082105 x 250 mm crowned cream SF46F02D032170 x 170 mm crowned cream, with regulation SF46F02C004170 x 300 mm crowned cream, with regulation SF46F02C067170 x 500 mm crowned cream, with regulation SF46F02C069

Crowned oxidized grate170 x 170 mm crowned oxidized SF46F02D020170 x 300 mm crowned oxidized SF46F02D023170 x 400 mm crowned oxidized SF46F02D087170 x 500 mm crowned oxidized SF46F02D088105 x 250 mm crowned oxidized SF46F02D033170 x 170 mm crowned oxidized, with regulation SF46F02C030170 x 300 mm crowned oxidized, with regulation SF46F02C033170 x 500 mm crowned oxidized, with regulation SF46F02C073

Crowned black-gold grate170 x 170 mm crowned black-gold SF46F02D083170 x 300 mm crowned black-gold SF46F02D084170 x 400 mm crowned black-gold SF46F02D085170 x 500 mm crowned black-gold SF46F02D086105 x 250 mm crowned black-gold SF46F02D031170 x 170 mm crowned black-gold, with regulation SF46F02C027170 x 300 mm crowned black-gold, with regulation SF46F02C076170 x 500 mm crowned black-gold, with regulation SF46F02C078

40 41

Dimensions in mm

110 x 170 mm 105 x 250 mm170 x 500 mm

Wall grates

IndexCrowned retro grate170 x 170 mm retro crowned SF46F02D010170 x 300 mm retro crowned SF46F02D012170 x 400 mm retro crowned SF46F02D056170 x 500 mm retro crowned SF46F02D013105 x 250 mm retro crowned SF46F02D038110 x 170 mm retro crowned SF46F02D011170 x 170 mm retro crowned, with regulation SF46F02C009170 x 300 mm retro crowned, with regulation SF46F02C011170 x 500 mm retro crowned, with regulation SF46F02C025

Crowned rattan grate170 x 170 mm rattan crowned SF46F02D005170 x 300 mm rattan crowned SF46F02D052170 x 400 mm rattan crowned SF46F02D089170 x 500 mm rattan crowned SF46F02D055105 x 250 mm rattan crowned SF46F02D044170 x 170 mm rattan crowned, with regulation SF46F02C008170 x 300 mm rattan crowned, with regulation SF46F02C019170 x 500 mm rattan crowned, with regulation SF46F02C023

Wall grates casingCasing for 170 x 170 mm, 1 x ø 100 mm air grate SF46F02F004Casing for 170 x 170 mm, 1 x ø 125 mm air grate SF46F02F001Casing for 170 x 170 mm, 1 x ø 150 mm air grate SF46F02F002Casing for 170 x 300 mm, 1 x ø 150 mm air grate SF46F02F003Casing for 170 x 300 mm, 2 x ø 125 mm air grate SF46F02F005

42 4342 43

Dimensions in mmTunnel grates

IndexTunnel grate white60 x 400 mm white SF46K04D07360 x 600 mm white SF46K04D06960 x 800 mm white SF46K04D07060 x 1000 mm white SF46K04D072

Tunnel grate cream60 x 400 mm cream SF46K04D07460 x 600 mm cream SF46K04D07560 x 800 mm cream SF46K04D07660 x 1000 mm cream SF46K04D077

Tunnel grate black60 x 400 mm black SF46K04D07860 x 600 mm black SF46K04D079 60 x 800 mm black SF46K04D08060 x 1000 mm black SF46K04D081

Tunnel grate graphite60 x 400 mm graphite SF46K04D08260 x 600 mm graphite SF46K04D08360 x 800 mm graphite SF46K04D084 60 x 1000 mm graphite SF46K04D085

Tunnel grate casingCasing for 60 x 400 mm grate, 2 x ø 125mm TS46E006Casing for 60 x 600 mm grate, 2 x ø 125mm TS46E007Casing for 60 x 800 mm grate, 2 x ø 150mm TS46E004Casing for 60 x 1000 mm grate, 2 x ø 150 mm TS46E005

42 43

Dimensions in mm

42 43

Accessories for assembling

IndexIsolating panelsLight isolating panels made of silicate-calcium material have low heat conduction. They also characterize with high heat-resistance and low thermal shrinkage. They are well suited for fireplace surrounding and thermal covers of walls made of inflammable materials.Isolating panel 1000x500x30 SF90I03D008Isolating panel 1250x1200x30 SF90I03D009

Joint mix resistant to high temperaturesTroll joint mix is used for mounting smoke pipes and chimney crossing in ceramic chimneys. Resistant to high temperatures.Troll joint mix – 5 kg package SF57T01Z001Troll joint mix – 25 kg package SF57T01Z002

Fixing materialsAssembly bolt 4.2x13, 100 pieces TS97A001Soft galvanized steel hook-up wire, 100g SF90W02P002Washer for assembling mineral wood TS97B001

Aluminum tapesOne-sided adhesive aluminum tape ALT, 50mm, length 50m, up to 50°C SF90A04A001Metalized aluminum tape ZX, 50mm, length 50m, up to 80°C SF90A04A002Reinforced aluminum tape ALE, 50mm, length 50m, up to 70°C SF90A04A004Aluminum tape AT – 506, 50mm, length 50m, up to 350°C SF90A08A006Reinforced aluminum tape, 50mm, length 50m, up to 150°C SF90A08A007

Cleanout doorCleanout chimney door 150 x 200 SF55M05G001Cleanout chimney door 150 x 300 SF55M05G002Cleanout chimney door 200 x 200 SF55M05G003Aluminum cleanout chimney door 170 x 240 SF55M05G004

44 45

Dimensions in mmAccessories for assembling

IndexFret sawsFret saws for fireplace ceramics allow to make large diameter holes in fitting pipes for prefabricated chimneys.Indispensable in tee connectors exchange.Fret saw for fireplace ceramics 226 mm 50027448Fret saw for fireplace ceramics 195 mm 50027449Drill for fret saw 10 mm 50027452

Brushes and cleaning rodsProfessional brush-cleaning rod 150 SF55S11S001Professional brush-cleaning rod 175 SF55S11S002Professional brush-cleaning rod 200 SF55S11S003Professional brush-cleaning rod 120 SF55S11S004Fitting for professional cleaning rods L 1000 SF55S11S005Fitting for professional cleaning rods L 2000 SF55M11S001

HygrometerAllows to measure dampness of firewood as well as of building materials i.e. plaster.Hygrometer MD-826 SF97D08P003

AnemometerProfessional anemometer is adjusted to measure gas flow, for instance in a ventilation system. Due to low magnetic loss of a blade impeller, the measu-rement is extremely accurate. It describes the air speed given in m/min, flow volume given in m3/s and gas temperature. All these values are shown on the display.Anemometr PL-130 AN SF97C08P003

PyrometerHigh quality pyrometer with a double laser tracer and easily-set emissivity factor. Short response time (<150ms) allows to carry out point measurement in easy and fast manner. The device has the option of setting minimum and maximum temperatures. In case of violating a set point limit, the color of display changes into red.Infrared pyrometer IR 550-10S, temperature range -50°C up to 550°C SF97C08P001Infrared pyrometer IR 550-10S, temperature range -50°C up to 650°C SF97C08P002

44 45

Dimensions in mmAccessories for maintenance

IndexGlues and mastic gumsCeramic glue for insulating rope 310ml SF57G01A002Mastic gum Calorygeb for stoves 310ml SF57G01B002

Insulating ropesInsulating rope 5,0 mm 51013860Insulating rope 4,7 mm 50027236Graphitoidal insulating rope 6,3 mm 10025213Insulating rope 8,0 x 2,8 mm with glue 50027328Insulating rope 7,0 mm with glue 51013862Insulating rope 8,0 mm with glue 50027240Insulating rope 8,8 mm 51013864Insulating rope 8,6 mm 50027234Insulating rope 9,5 mm 51013861Insulating rope 9.5 mm 50027235Insulating rope 12,0x3,0 mm w/glue for 18 Panorama glass panel 50027242Insulating rope WT-187,0x18,0x5,0 mm Exclusive 50027212

Paints and varnishBP paint 1 litre can 50027338Grey GP paint 200ml 50027346Grey GP paint 250ml 50027272Black BP paint 250ml 50027273Grey GP spray paint 400ml 50027280Black BP spray paint 400ml 50027282

CleanersGlass cleaner for fireplace glass SF57W05E001Paste for stove renovation, BP SF94S12P003Cleaner for INOX surfaces SF94B08A003Cleaner for soapstone surfaces 50500110Chimney and fireplace inserts cleaner Sadpal SF57S05E003

46 47

Dimensions in mmFireplace tool sets

IndexFireplace tool set, greyHeight: 63cm

50027561

Fireplace tool set, stainless steelHeight: 72cm

50027564

Fireplace tool set, stainless steel, glassHeight: 67,5cm

50027565

Fireplace tool set, leatherHeight: 65cm

50037031

Firewood boxes

Firewood box, blackDiameter: Ø44cm, height: 32cm

50027555

Firewood box, stainless steel, a setDiameter: Ø44cm, height: 32cmDiameter: Ø35cm, height: 27cm

50027556

Firewood box, leatherDimensions: 45x30x35cm

50027557

Firewood box, blackDimensions: 40x40x150cm

TS55Z005

46 47

Dimensions in mmAccessories for fireplaces

IndeksAsh container with separatorHeight: 63 cm

TS55D001

Fireplace hoe TS55Z003

Fireplace fenceDimensions: 116x121x61 cm

50027569

Fireplace gloves SF57P09H002

Fireplace lighter SF57B09H002

Fireplace matches SF57C04G001

Firelighter SF57R04F003

48 49

Dimensions in mmPromotional accessories

IndeksCatalogue standCatalogue stand SF71K10S003Additional set of shelves for the catalogue stand (5pcs.) SF71K10S004Jøtul logo for catalogue stand SF71K10S006Scan logo for catalogue stand SF71K10S009Atra logo for catalogue stand SF71K10S010

Infosheet floor rackInfosheet floor rack SF71K10S001Infosheet wall rack SF71K10S002Jøtul logo for Infosheet rack SF71K10S005 Scan logo for Infosheet rack SF71K10S007Atra logo for Infosheet rack SF71K10S008

Clip frame stand (Plexiglass)Dimensions: 15x21,5x7cm

SF71S13S005

Roll-upDimensions: 100x200 cm

SF70C09C030

PosterDimensions: 50x70 cm

SF70C09C028

Poster (on PCV)Dimensions: 50x70 cm

SF70C09C029

48 49

Dimensions in mm

IndeksBanner with lifting eyesSize: 200x100 cm

SF70C09C031

Labels on self adhesive foilSize: according to an order

SF70C09C033

Labels on hard cover PCVSize: according to an order

SF70C09C032

Coffee setCoffee pot, small milk pot, sugar-bowl, 6 coffee cups and saucers

SF70E08D003

Baseball cap SF70J01A011

Fleece jacket SF70B06P001

Pin-up Jøtul SF70J01A004

Lanyard Scan SF70P13S001Lanyard Jøtul SF70P13S002

Key ring SF70P13S003

Ballpoint pen SF70B06D001


Products’ certificates, technical drawings and specification can be found on the websites:

www.jotul.plwww.kominek.pl

Jøtul Group Accessories

Accessories presented in this catalogue contain a vast range of painted and enameled smoke pipes dedicated for firewood-fuelled stoves. The catalogue also presents elements of heating systems which can be furnished with accumulating masses as well as water exchangers. Additionally, it covers big variety of steel and glass floor panels. To simplify the selection of accessories, we attached adequate optional equipment to each our stove and fireplace model.

Due to the ever-changing needs of the market, we continually work on developing our products to meet the customers’ needs.

High quality of each element

Den største sikkerhetsrisikoen ved fyring finnes mellom iSafe use predominantly depends on materials and accessories used. Caring for our customers’ safety, we make sure that each and every product conforms to demanding safety measures.The whole process of production is based on profound knowledge, lifelong experience and reliable craftsmanship. Throughout the whole process of production, each product is made and controlled by highly skilled experts.

Our customers are absolutely convinced of high quality of our products.

Painted pipes

Enameled pipes


Chimney crossings

Air intake

Heating systems

Accessories for fireplace

inserts

Accessories for stoves

Floor panels

Accessories for installation

Accessories for maintenance


September2012

Jøtul Polska Spółka z o.o.ul. Twarda 12 A80-871 GdańskPoland Tel: +48 58 340 38 88 Fax: +48 58 344 96 28 www.jotul.pl

Jøtul constantly emphasizes the importance of innovation and works on product development each day. Therefore, technical specification, stylistics and other characteristics of our products are subjects to change without prior notice.

September 2012

Accessories for stoves and fireplace inserts

Accessories for stoves and fireplace inserts - jotul… · Products’ certificates, technical...

Documents

Transcript of Accessories for stoves and fireplace inserts - jotul… · Products’ certificates, technical...