Accessories for Hydraulic Components - Flowfitonline.coms/458.pdf · Accessories for Hydraulic...
Transcript of Accessories for Hydraulic Components - Flowfitonline.coms/458.pdf · Accessories for Hydraulic...
Accessories for Hydraulic Components
Accessories for hydrAulic components • 54350% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 543 06/11/2014 15:15
544 • Accessories for hydrAulic components
Magnetized parts Permanently magnetized with special alloy The dipsticks
and the magnetic elements are mechanically fastened
light alloy in hardened and tempered bar from breaking load ........................................................40 ÷ 45 A 5% elongation ...................................................13 ÷ 17 hardness Brinel Hd Kg/mmq ............................100 ÷ 125 UNI EN standards .....EN 754 - 3 : 1998 EN 573 - 3 : 1996
inspection window 1) Polycarbonate material
constant temperature during use up to ...............+ 120°C 2) Pyrex glass
constant temperature during use up to ...............+ 200°C
Washers 1) Oil-proof exempt asbestos ..............................70 SHORE2) Viton ........................................................ - 20°C + 100°C3) O-rings in nitrile rubber, mineral oil proof
temperature during use from ...........................70 SHORE4) O-rings in Viton
temperature during use from .................... - 20°C + 200°C
The articles can be supplied with anodic treatment, standard or for salt environment.
The Company, in an effort to improve the technological content of its products, reserves the right to change the quotas indicated in the technical tables, without prior notice.
All the quotas are expressed in mm.
Filling plug with breather. Breather plug.
Filling plug with breather. Oil filling plug and breather.
Filling plug with breather and milled head.
Oil filling plug and breather.
Filling plug and breather. Oil filling plug and breather.
Filling plug and breather. Breather plug with valve.
Breather plug. Extension for oil with breather.
Breather plug with double valve.
The FolloWing is a lisT oF soMe parTicular coMponenTs WiTh Their Technical characTerisTics:
index
BreaTher plugs
TCF/ZPage 548
TSFO/RPage 551
TCFPage 548
TSFPage 552
TCF/FPage 549
TSFAPage 552
TCFSPage 549
TSFT/NPage 553
TCSF/ZPage 550
TSSPage 553
TMVPage 550
PRS/FPage 554
TSVVPage 551
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 544 06/11/2014 15:15
Accessories for hydrAulic components • 545
Magnetic oil - drain plug with hex slot..
Visual level indicator with milled head.
Inspection porthole or liquid level.
Inspection porthole or liquid level.
Dome-shaped level gauge.
Level indicator unitwith breather plug.
Visual level indicator with glass.
Filling plug.
Filling plug with dipstick.
Filling plug with dipstick.
Filling plug with dipstick and breather.
Filling plug with dipstickand breather hole.
Level indicator.
Level indicator with breather.
Level indicator with breather.
Visual level indicator non-threaded.
Visual level indicator.
Drain filling plug with hex slot.
Filling plug.
Drain plug.
Filling plug.
Drain plug.
Magnetic drain plug.
Magnetic drain plug with milled head.
Magnetic filter rod.
Magnetic filter with dipstick and breather.
MagneTic plugs
MagneTic plugs
Visual leVel indicaTors
leVel indicaTors WiTh dipsTick
TCEMPage 554
TLA/FPage 561
OBLÒ Ø 100Page 562
OBLÒ Ø 148Page 562
IFCPage 563
GTSFPage 563
TLAXPage 561
TC/Z Page 557
TCLA Page 564
TCLA/Z Page 564
TCLS/Z Page 565
TCLS Page 565
ILA Page 566
ILAF Page 566
ILAS Page 567
TLP Page 560
TLA Page 560
TCE Page 557
TC Page 558
TSC Page 558
TC/F Page 559
TSC/F Page 559
TSCMPage 555
TSCM/FPage 555
FMCPage 556
FMC/LSPage 556
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 545 06/11/2014 15:15
546 • Accessories for hydrAulic components
Level indicator with breather.
Vertical level indicatorwith single thread.
Vertical level indicatorwith double thread.
Vertical level indicator withdouble electrical contact.
Vertical level indicator with double thread, with pyrex glass and protection.
Vertical level indicator.
Vertical level indicatorwith thermometer.
Vertical level indicator with electrical contact.
LSFPage 567
GLVSPage 569
GLVPage 570
GLVEPage 571
GLVXPage 570
PLPage 571
PLTPage 572
PLEPage 572
Visual level indicatorwith float system.
Visual level indicator with float system.
Flanged level indicator withfloat system.
Visual leVel indicaTors WiTh FloaT sYsTeM
VerTical Visual leVel indicaTors
TRBF/LGPage 568
TC/ZLGPage 568
LGF68Page 569
Level indicators with dipstick cont.
Female threaded plugwith breather.
Female threaded plug.
Female threaded plugwith breather.
Female threaded plugwith breather and dipstick.
Female threaded plugwith breather.
Filling plug.
Filling plug with threaded mount.
Filling plug with lock-holder.
Filling plug with flangeto be welded.
Hermetic filling plug.
Filling plug with breather.
Filling plug with breatherand lock-holder.
Hermetic filling plug with key lock.
Filling plugsTFES Page 573
TFE/Z Page 573
TFES/Z Page 574
TFES/ZA Page 574
TFES/ZF Page 575
TCAR Page 575
TCARFPage 577
TCAR/LCPage 576
TCARSPage 576
TRBFPage 577
TRBFSPage 578
TRBFSCPage 578
TRBF/ZKPage 579
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 546 06/11/2014 15:15
Accessories for hydrAulic components • 547
Inclined flange for side applications.
Inclined filling plug.
Filling plugfor side applications.
Filling plug with breatherfor side applications.
Filling plug with dipstick and breather for side applications.
FLGVPage 580
TCARIPage 582
TCI -TC/ZITC/FIPage 581
TCFI - TSFITCF/FI - TCF/ZITCSF/ZIPage 581
TCLAI - TCLA/ZI TCLSI - TCLS/ZIILAFI - LSFIFMC/LSIPage 582
plugs on inclined Flange
INCLINED FLANGE
FILLING PLUG ON INCLINED FLANGE
FILLING PLUGS ON INCLINED FLANGE
BREATHER PLUGS ON INCLINED FLANGE
FILLING AND BREATHER PLUGS WITH LEVEL DIPSTICK ON INCLINED FLANGE
Filling plug with breather.
Breather and filling plug.
TRBFS/APage 579
TRTCSF/ZPage 580
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 547 06/11/2014 15:15
548 • Accessories for hydrAulic components
TCF/ZFilling plugwith breather
CODE1GCFZ00A1GCFZ10A1GCFZ20A1GCFZ30A1GCFZ40A1GCFZ50A1GCFZ60A1GCFZ70A1GCFZ80A
h121213,516,52021,5202020
f88
10101214151517
d202226304045555570
GAS1/8”1/4”3/8”1/2”3/4”1”1”1/41”1/22”
CODE1MCFZ00A1MCFZ10A1MCFZ20A1MCFZ30A1MCFZ40A1MCFZ50A1MCFZ60A1MCFZ70A1MCFZ80A
10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
£3.33£3.85£4.45£5.02£8.48£12.31£18.61£22.26£41.12
£3.33£3.85£4.45£4.97£4.99£5.02£8.81£11.38£12.31
h121212121515152021,5
f88
10101010121214
d202226263030364245
TYPE PRICE PRICETCF/Z0GTCF/Z1GTCF/Z2GTCF/Z3GTCF/Z4GTCF/Z5GTCF/Z6GTCF/Z7GTCF/Z8G
TYPETCF/Z0MTCF/Z1MTCF/Z2MTCF/Z3MTCF/Z4MTCF/Z5MTCF/Z6MTCF/Z7MTCF/Z8M
Threaded plug with knurled round headfor hand-tightening.Hole for venting internal pressure.For application only on upper partof the crankcase away frommoving parts.For applications requiring extra-tightsealing, type TSFT/N is recommended.
MB series
h
f
d
TCFFilling plugwith breather
1MTCF00A1MTCF10A1MTCF20A1MTCF30A1MTCF40A1MTCF50A1MTCF60A1MTCF70A1MTCF80A1MTCF90A1MTCF91A1MTCF92A1MTCF93A
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 226 x 1,530 x 233 x 242 x 348 x 360 x 4
Hole for venting internal pressure.For application only on upper partof the crankcase away from moving parts.For applications requiring extra-tightsealing, type TSFT/N is recommended.
t 5 7,5 8,5 8,5 9,5 9,5101012
f88
10101214151517
e141722273240505570
GAS1/8”1/4”3/8”1/2”3/4”1”1”1/41”1/22”
t 5 6 7 7 7 8,5 8 8 8 8101012
f88
1010101012121214151517
e14172222242730323640 £11.1350 £16.5455 £19.9270 £39.83
t
f
e
CODE1GTCF00A1GTCF10A1GTCF20A1GTCF30A1GTCF40A1GTCF50A1GTCF60A1GTCF70A1GTCF80A
CODETYPETCF0GTCF1GTCF2GTCF3GTCF4GTCF5GTCF6GTCF7GTCF8G
TYPETCF0MTCF1MTCF2MTCF3MTCF4MTCF5MTCF6MTCF7MTCF8MTCF9MTCF10MTCF11MTCF12M
£2.86£3.13£3.25£4.35£6.17£10.02£16.54£19.92£39.83
PRICE£2.86£3.13£3.25£3.94£4.48£4.35£7.18£8.15£10.35
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 548 06/11/2014 15:15
Accessories for hydrAulic components • 549
TCF/FFilling plugwith breatherand milled head
MB series
10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,5
CODE
1MF/F00A1MF/F10A1MF/F20A1MF/F30A1MF/F40A1MF/F50A
t
78
1089
10,5
TYPE
TCF/F0MTCF/F1MTCF/F2MTCF/F3MTCF/F4MTCF/F5M
CODE
1GF/F00A1GF/F10A1GF/F20A1GF/F30A1GF/F40A1GF/F50A
f
12,5
889
1112
t
7 9,51010,510,512
TYPE
TCF/F0GTCF/F1GTCF/F2GTCF/F3GTCF/F4GTCF/F5G
d
142022283240
GAS1/8”1/4”3/8”1/2”3/4”1”
e
101718222734
d
142022262828
f
8899
1111
e
101718202222
t
f
d
e
Hole for venting internal pressure.The milled head produces a crownwith greater adherence areato the crankcase.For application only on upper partof the crankcase away from moving parts.For applications requiring extra-tight sealing,type TSFT/N is recommended.
£2.63£3.15£3.23£4.23£2.57£9.54
PRICE
£2.63£3.15£3.23£3.56£4.02£4.23
PRICE
TCFSFilling plugand breather
t7,58,5788
f89
121416
e1722273240
GAS1/4”3/8”1/2”3/4”1”
CODE1GCFS10A1GCFS20A1GCFS30A1GCFS40A1GCFS50A
TYPETCFS1GTCFS2GTCFS3GTCFS4GTCFS5G
µ
4040404040
t67777
f899
1212
e1722222427
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,5
TYPETCFS1MTCFS2MTCFS3MTCFS4MTCFS5M
CODE1MCFS10A1MCFS20A1MCFS30A1MCFS40A1MCFS50A
µ
4040404040
Threaded plug with hex head and with holeand a spherical bronze filter which ventinternal pressure and keep out foreignbodies during the intake stroke.The built-in filter has a filtration degreeof 40 microns.The TCFS is especially suitable in dustyenvironments and with very small encumbrance.
t
f
e
£4.61£5.29£7.63£9.87£14.00
PRICE£4.61£5.32£6.28£7.59£7.63
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 549 06/11/2014 15:15
550 • Accessories for hydrAulic components
Filling plugand breather
CODE1GSFZ10A1GSFZ20A1GSFZ30A1GSFZ40A1GSFZ50A1GSFZ60A1GSFZ70A1GSFZ80A
f8
1012
14161617
13,5
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
f8
10101212
1414
13,5
Threaded plug with knurled round headfor hand-tightening.The hole and a spherical bronze filtervent internal pressure and keep out foreignbodies during the intake stroke.The built-in filter has a filtration degreeof 40 microns.The TCSF/Z is therefore especially suitablein dusty environments and is recommendedfor applications on Hydraulic Units.
TCSF/Z
d
h
f
h121216,52021,521,521,520
d2226304045555570
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
µ4040404040
200 £22.93200 £26.56200 £40.97
h1212121515152020
d2226263030364245
µ404040404040 £11.2840 £14.4140 £16.32
TYPETCSF/Z1MTCSF/Z2MTCSF/Z3MTCSF/Z4MTCSF/Z5MTCSF/Z6MTCSF/Z7MTCSF/Z8M
1MSFZ10A1MSFZ20A1MSFZ30A1MSFZ40A1MSFZ50A1MSFZ60A1MSFZ70A1MSFZ80A
CODETYPETCSF/Z1GTCSF/Z2GTCSF/Z3GTCSF/Z4GTCSF/Z5GTCSF/Z6GTCSF/Z7GTCSF/Z8G
£6.20£7.10£8.41£12.31£16.32
PRICE£6.20£7.10£7.76£8.84£8.89
PRICE
TMVBreather plug
t567788
f88
10101214
e141722273240
GAS1/8”1/4”3/8”1/2”3/4”1”
CODE1GTMV00A1GTMV10A1GTMV20A1GTMV30A1GTMV40A1GTMV50A
TYPETMV0GTMV1GTMV2GTMV3GTMV4GTMV5G
t5667777
f888
10101010
e14171722222427
MB series10 x 112 x 1,514 x 1,516 x 1,518 x 1,520 x 1,522 x 1,5
TYPETMV0MTMV1MTMV2MTMV3MTMV4MTMV5MTMV6M
CODE1MTMV00A1MTMV10A1MTMV20A1MTMV30A1MTMV40A1MTMV50A1MTMV60A
Breather plug with O-ring and externalvalve with an inox spring calibratedfrom 0,10 to 0,15 bar.It opens at intervals and vents internalpressure.The valve has the double functionof keeping out foreign bodies andavoid fluid leakage.It is especially recommendedfor Differentials, Transmissionsand small Speed Reducers.
t
f
e
£4.39£4.69£5.61£6.85£10.28£13.12
PRICE£4.39£4.39£4.69£5.61£6.41£7.24£6.85
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 550 06/11/2014 15:15
Accessories for hydrAulic components • 551
TSVV
t10101088
f1010101214
GAS1/4”3/8”1/2”3/4”1”
TYPETSVV1GTSVV2GTSVV3GTSVV4GTSVV5G
e1722273240
CODE1GSVV10A1GSVV20A1GSVV30A1GSVV40A1GSVV50A
t10101010101010888
f10101010101010121214
TYPE e171722222427 £12.8930 £19.2832 £22.3436 £24.85
£26.0440
TSVV0MTSVV1MTSVV2MTSVV3MTSVV4MTSVV5MTSVV6MTSVV7MTSVV8MTSVV9M
MB series12 x 1,514 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 1,526 x 1,530 x 233 x 2
CODE1MSVV00A1MSVV10A1MSVV20A1MSVV30A1MSVV40A1MSVV50A1MSVV60A1MSVV70A1MSVV80A1MSVV90A
Registered model
t
f
e
Breather plug with double valveBreather plug with double valve made of hardenedand tempered light alloy. It is provided with standard0,10 bar calibration, which can be adjustedby the operator depending on the intended use.The double valve ensures venting of internalpressure and inlet of air when the flow mediumlevel decreases thus hindering cavitation on delivery.Particularly suitable for Tanks, Oil-hydraulicCircuits and Hydraulically OperatedLifting Machines.
£10.02£10.61£12.89£17.28£26.04
PRICE£10.02£10.02£10.61£11.71£12.48
PRICE
e
d
h
f
d
212124303038
h
212123262429
f
889
101214
GAS1/8”1/4”3/8”1/2”3/4”1”
TYPE
TSFO/R0GTSFO/R1GTSFO/R2GTSFO/R3GTSFO/R4GTSFO/R5G
CODE
1GTOR00M1GTOR10M1GTOR20M1GTOR30M1GTOR40M1GTOR50M
e
171720273240
TSFO/R0MTSFO/R1MTSFO/R2MTSFO/R3MTSFO/R4MTSFO/R5M
1MTOR00M1MTOR10M1MTOR20M1MTOR30M1MTOR40M1MTOR50M
d
212124303030
h
212123262626
f
889
101010
TYPE CODE MB series
10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,5
e
171720272727
TSFO/RBreather plug
Oil filling and breather plug with galvanized-steel cover.Large internal chamber with O-ringespecially designed for Agricultural andEarth- moving Machines, to be appliedwherever there is strong sloshingof the fluids.
£4.39£4.66£4.95£6.56£9.13£14.05
PRICE£4.39£4.66£4.95£4.95
£6.56£6.41
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 551 06/11/2014 15:15
552 • Accessories for hydrAulic components
h1719212429333540
f8
10121416161616
e1722273240505570
GAS1/4”3/8”1/2”3/4”1”1”1/41”1/22”
TYPETSF1GTSF2GTSF3GTSF4GTSF5GTSF6GTSF7GTSF8G
d16,522263038505570
CODE1GTSF10M1GTSF20M1GTSF30M1GTSF40M1GTSF50M1GTSF60A1GTSF70A1GTSF80A
µ4040404040
200200200
h1719192121242529333540
f8
10101212121416161616
e1722222427303640505570
TYPETSF1MTSF2MTSF3MTSF4MTSF5MTSF6MTSF7MTSF8MTSF9MTSF10MTSF11M
µ4040404040404040
200200200
d16,5
22222426303038505570
CODE1MTSF10M1MTSF20M1MTSF30M1MTSF40M1MTSF50M1MTSF60M1MTSF70M1MTSF80M1MTSF90A1MTSF91A1MTSF92A
MB series14 x 1,516 x 1,518 x 1,520 x 1,522x 1,524 x 230 x 233 x 242 x 348 x 360 x 4
e
d
h
f
TSFOil filling plugwith breather
A galvanized-steel cover and a sphericalbronze filter vent internal pressureand keep out foreign bodies duringthe intake stroke.The built-in filter has a filtration degreeof 40 microns.The TSF is therefore especially suitablein dusty environments and is recommendedfor applications on Hydraulic Unitsand Cylinders.
£6.50£7.92£9.56£13.18£18.74£31.38£42.75£79.33
PRICE£6.50£7.92£8.84£9.46
£16.86£9.56
£18.04£18.74£31.38
£79.33£42.75
PRICE
d16,516,522263038
h161719202429
f88
11111214
GAS1/8”1/4”3/8”1/2”3/4”1”
CODE1GTSFA0M1GTSFA1M1GTSFA2M1GTSFA3M1GTSFA4M1GTSFA5M
e141722273240
TYPETSFA0GTSFA1GTSFA2GTSFA3GTSFA4GTSFA5G
µ404040404040
d16,516,516,522222426303030
h16171719192020242425
µ40404040404040 £8.5340 £15.2040 £15.6040 £17.17
MB series10 x 112 x 1,514 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 1,526 x 1,530 x 1,5
e14171722222427303236
f888
11111111121214
TYPETSFA0MTSFA1MTSFA2MTSFA3MTSFA4MTSFA5MTSFA6MTSFA7MTSFA8MTSFA9M
CODE1MTSFA0M1MTSFA1M1MTSFA2M1MTSFA3M1MTSFA4M1MTSFA5M1MTSFA6M1MTSFA7M1MTSFA8M1MTSFA9M
e
d
h
f A galvanized-steel cover and a sphericalbronze filter vent internal pressureand keep out foreign bodies duringthe intake stroke.The built-in filter has a filtrationdegree of 40 microns.The TSFA is therefore especially suitablein dusty environments and is recommendedfor applications in the motor field.
TSFAOil filling plugand breather
£5.13£5.42£6.81£8.53£11.89£18.18
PRICE£6.23£6.28£6.28£6.82
£8.89£8.67
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 552 06/11/2014 15:15
Accessories for hydrAulic components • 553
d16,5
22263038505570
h2329293543454646
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
TYPETSFT/N1GTSFT/N2GTSFT/N3GTSFT/N4GTSFT/N5GTSFT/N6GTSFT/N7GTSFT/N8G
f89
101214151517
e1722273240505570
CODE1GTSN10M1GTSN20M1GTSN30M1GTSN40M1GTSN50M1GTSN60A1GTSN70A1GTSN80A
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524x 230 x 233 x 242 x 348 x 360 x 4
TYPETSFT/N1MTSFT/N2MTSFT/N3MTSFT/N4MTSFT/N5MTSFT/N6MTSFT/N7MTSFT/N8MTSFT/N9MTSFT/N10MTSFT/N11M
CODE1MTSN10M1MTSN20M1MTSN30M1MTSN40M1MTSN50M1MTSN60M1MTSN70M1MTSN80M1MTSN90A1MTSN91A1MTSN92A
d
h
f
e
d16,5
22222426303038505570
h2329292929354243454646
f899
1010121214151517
e17222224273036 £23.2240 £24.0050 £39.4955 £47.7770 £91.52
TSFT/NOil filling plugand breather
Large chamber with labyrinth and perpendicularcut protected by a galvanized-steel cover.The pressure created by moving partswithin the gearbox is vented through thelabyrinth without oil spattering, even thoughthe plug is mounted vertically to the parts.Particularly suitable for mounting on ReductionGears, Geared Motors, Speed Variators andGearshift Boxes.
£7.18£8.59£11.98£14.98£21.45£39.49£47.77£91.52
PRICE£7.20£8.59£10.50£11.59
£17.95£11.98
PRICE
d16,516,5
22222426303038
h161719192020242529
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
e14172222242730 £12.0436 £19.5040 £18.92
f 8 9,511111111121414
TYPETSS0MTSS1MTSS2MTSS3MTSS4MTSS5MTSS6MTSS7MTSS8M
CODE1MTSS00M1MTSS10M1MTSS20M1MTSS30M1MTSS40M1MTSS50M1MTSS60M1MTSS70M1MTSS80M
141722273240
d16,516,5
22263038
h161719202429
f 8 9,511111214
GAS1/8”1/4”3/8”1/2”3/4”1”
CODE1GTSS00M1GTSS10M1GTSS20M1GTSS30M1GTSS40M1GTSS50M
eTYPETSS0GTSS1GTSS2GTSS3GTSS4GTSS5G
d
h
f
e
TSSBreather plug with valve
Breather plug with galvanized-steel coverand specially-designed internal valvewith an inox spring, calibrated from0,05 to 0,10 bar, which opens at intervalsto vent internal pressure created by fluidturbulence and keep out foreign bodies.It is especially recommended for applicationson Speed-shift Gears, Agricultural over-Gearsand Industrial Speed-Reduction Gearboxes.
£7.20£7.72£8.17£9.76£13.48£18.92
PRICE£7.20£7.72£8.17£9.20
£9.76£9.69
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 553 06/11/2014 15:15
554 • Accessories for hydrAulic components
f
810111214
GAS1/4”3/8”1/2”3/4”1”
TYPE
PRS/F1GPRS/F2GPRS/F3GPRS/F4GPRS/F5G
e
1722273238
d
2026303642
h
4040405050
CODE
1GPSF10A1GPSF20A1GPSF30A1GPSF40A1GPSF50A
TYPE
PRS/F1MPRS/F2MPRS/F3MPRS/F4MPRS/F5M
CODE f
810101111
e
1722222727
d
2026263030
h
4040404040
MB series
14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,5
1MPSF10A1MPSF20A1MPSF30A1MPSF40A1MPSF50A
e
h
f
d
PRS/FExtension for oilwith breather
Made of aluminium alloy, samethread for both internal and externalside, with large chamberwith labyrinth.
Particularly suitable for Agricultural,Earth Moving and Building Machines.
£7.50£9.13£11.61£14.69£23.22
PRICE
£7.50£9.13£10.12£11.19£11.61
PRICE
g555566666
1010101010
h44555555566666
f8
12121212141414141616161616
t33333444444445
d14171921232527 £6.8529 £10.5429 £10.5432 £13.2632 £13.2636 £14.0236 £14.0240 £14.26
MB series10 x 112 x 1,514 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 1,524 x 226 x 1,527x 230 x 1,530x 233x 2
TYPETCEM0MTCEM1MTCEM2MTCEM3MTCEM4MTCEM5MTCEM6MTCEM7MTCEM8MTCEM9MTCEM10MTCEM11MTCEM12MTCEM13M
COD•1MTEM00A1MTEM10A1MTEM20A1MTEM30A1MTEM40A1MTEM50A1MTEM60A1MTEM70A1MTEM80A1MTEM90A1MTEM91A1MTEM92A1MTEM93A1MTEM94A
CODE1GTEM00A1GTEM10A1GTEM20A1GTEM30A1GTEM40A1GTEM50A1GTEM60A1GTEM70A1GTEM80A
g5556
1010151515
h455566
101015
f8
1212141616161620
t333445555
d14182226324049 £27.8755 £32.1568 £58.38
TYPETCEM0GTCEM1GTCEM2GTCEM3GTCEM4GTCEM5GTCEM6GTCEM7GTCEM8G
Made of tempered, hardened alloy.A permanent magnetic insert of specialalloy attracts and holds ferrous particlessuspended or circulating in the oil.Especially recommended for high-rpmmachinery.Available with metal washers only.
NORMA DIN 908 type
Magnetic oil - drain plugwith hex slot
TCEMg
h
f
t
d
Caulked
e
e56688
101012121212171717
e568
101217222432
GAS1/8”1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
£5.07£5.19£5.43£6.85£12.37£14.26
PRICE
£5.07£5.17£5.19£5.43
£6.58£6.17
PRICE
MagneTic plugs
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 554 06/11/2014 15:15
Accessories for hydrAulic components • 555
TSCMMagnetic drain plug
CODE1GSCM00A1GSCM10A1GSCM20A1GSCM30A1GSCM40A1GSCM50A1GSCM60A1GSCM70A1GSCM80A
TYPETSCM0GTSCM1GTSCM2GTSCM3GTSCM4GTSCM5GTSCM6GTSCM7GTSCM8G
MB series10 x 112 x 1,514 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 242 x 348 x 360 x 4
TYPETSCM0MTSCM1MTSCM2MTSCM3MTSCM4MTSCM5MTSCM6MTSCM7MTSCM8MTSCM9MTSCM10MTSCM11MTSCM12M
CODE1MSCM00A1MSCM10A1MSCM20A1MSCM30A1MSCM40A1MSCM50A1MSCM60A1MSCM70A1MSCM80A1MSCM90A1MSCM91A1MSCM92A1MSCM93A
A magnetic insert attractsand holds ferrous particles suspendedor circulating in the oil, safeguardingrotating parts.
Recommended for high-rpm machinery.
h6668
1015151515
GAS1/8”1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
f88
10101214151517
e141722273240505570
g5568
1015151515
t 5 7,5 8,5 8,5 9,5 9,510 £29.0210 £32.1512 £51.36
h6666688
101015151515
f888
10101010121214151517
e14171722222427303640505570
g5556688
101015151515
t 5 6 6 8,5 8,5 7 8,5 £11.35 8 £13.65 8 £17.46 8 £24.2610 £30.5310 £32.1512 £51.36
e
g
h
f
t
Caulked
£5.91£6.36£7.41£10.50£14.50£20.61
PRICE£6.28£6.58£6.87£7.84
£10.05£8.24
PRICE
CODE1GM/F00A1GM/F10A1GM/F20A1GM/F30A1GM/F40A1GM/F50A
TYPETSCM/F0GTSCM/F1GTSCM/F2GTSCM/F3GTSCM/F4GTSCM/F5G
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
d14182224262830 £13.7938 £17.3740 £21.00
TYPETSCM/F0MTSCM/F1MTSCM/F2MTSCM/F3MTSCM/F4MTSCM/F5MTSCM/F6MTSCM/F7MTSCM/F8M
CODE1MM/F00A1MM/F10A1MM/F20A1MM/F30A1MM/F40A1MM/F50A1MM/F60A1MM/F70A1MM/F80A
t88
1099
10,59
10,510,5
g
h
f
t
d
Caulked
e
GAS1/8”1/4”3/8”1/2”3/4”1”
h445667
f889
111214
e101418222734
g5556
1010
t 8 9,51010,51212
d141822283240
h445566667
f8899
1011121214
e101418182022243034
g5555668
1010
TSCM/FMagnetic drain plugwith milled head
Head milling produces a crownwith greater sealing area against thecrankcase.
A magnetic insert attracts and holdsferrous particles suspended or circulatingin the oil, protecting all rotating parts.
Recommended for high-rpm machinery.
£6.33£6.97£7.92£11.28£15.00£21.00
PRICE£6.33£6.97£7.92£8.67
£11.28£9.58
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 555 06/11/2014 15:15
556 • Accessories for hydrAulic components
CODE1GFMC10A1GFMC20A1GFMC30A1GFMC40A1GFMC50A1GFMC60A1GFMC70A
l8095
102104105105107
TYPEFMC1GFMC2GFMC3GFMC4GFMC5GFMC6GFMC7G
MB series16 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 242 x 348 x 360 x 4
l80809595
102102104105105107
TYPEFMC1MFMC2MFMC3MFMC4MFMC5MFMC6MFMC7MFMC8MFMC9MFMC10M
CODE1MFMC10A1MFMC20A1MFMC30A1MFMC40A1MFMC50A1MFMC60A1MFMC70A1MFMC80A1MFMC90A1MFMC95A
Caulked
t
f
lh
g
e
t 7 7 7 8,5 8 8 8101012
f10101010121214151517
h70708585909090909090
e22222427303640505570
g99
1212121717282828
t 7 9,5 9,5 9,5101012
f10101214151517
GAS3/8”1/2”3/4”1”1” 1/41” 1/22”
h70859090909090
e22273240505570
g9
121717282828
FMCMagnetic filterrod
Head of hardened, tempered light alloy.Permanent magnetic sectionsof special alloy with wide-radius action.Non-magnetic coating is smoothfor easier, better cleaning.Recommended for Grinding Machines,Hydraulic Units and Large tanks.On request, supplied with different lenght.
£32.92£40.18£52.80£66.49£83.90£87.80£102.77
PRICE£33.16£35.84£43.41£43.46
£71.61£66.49
£92.41£102.77
£83.90
£55.04
PRICE
FMC/LSMagnetic filterwith dipstick and breather
CODE1GFLS10A1GFLS20A1GFLS30A1GFLS40A
e27324050
TYPEFMC/LS1GFMC/LS2GFMC/LS3GFMC/LS4G
Magnetic dipstick built into breather plug.Galvanized-steel cover vents internalpressure and keeps out foreign bodiesduring the intake stroke.The magnetic dipstick is composedof permanent magnetic sectionsin special alloy with wide-radius action.The non-magnetic coating is smoothfor easier, better cleaning.Recommended for Grinding MachinesHydraulic Units and Large Tanks.On request, supplied with different length.
e
d
h
f
l
g
d26303850
h22242933
f10121415
GAS1/2”3/4”1”1” 1/4
l170200200200
g9
121217
£45.92£61.18£81.08£98.39
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 556 06/11/2014 15:15
Accessories for hydrAulic components • 557
TC/ZFilling plug
CODE1GCZO00A1GCZO10A1GCZO20A1GCZO30A1GCZO40A1GCZO50A1GCZO60A1GCZO70A1GCZO80A
TYPETC/Z0GTC/Z1GTC/Z2GTC/Z3GTC/Z4GTC/Z5GTC/Z6GTC/Z7GTC/Z8G
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
TYPETC/Z0MTC/Z1MTC/Z2MTC/Z3MTC/Z4MTC/Z5MTC/Z6MTC/Z7MTC/Z8M
CODE1MCZO00A1MCZO10A1MCZO20A1MCZO30A1MCZO40A1MCZO50A1MCZO60A1MCZO70A1MCZO80A
Threaded plug with knurled
round head for hand-tightening.
d202226304045555570
GAS1/8”1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
h121213,516,52021,5202020
f88
10101214151517
d202226263030364245
h121212121515152020
f88
10101010121214
h
f
d
By request: with filling label
£3.15£3.67£4.20£5.61£8.15£11.33£17.56£22.41£41.80
PRICE£3.15£3.67£4.20£4.76
£5.61£7.97£10.41£11.33
£5.32
PRICE
TCEDrain filling plugwith hex slot
CODE1GTBE00A1GTBE10A1GTBE20A1GTBE30A1GTBE40A1GTBE50A1GTBE60A1GTBE70A1GTBE80A
TYPETCE0GTCE1GTCE2GTCE3GTCE4GTCE5GTCE6GTCE7GTCE8G
MB series10 x 112 x 1,514 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 1,524 x 226 x 1,527 x 230 x 1,530 x 233 x 2
TYPETCE0MTCE1MTCE2MTCE3MTCE4MTCE5MTCE6MTCE7MTCE8MTCE9MTCE10MTCE11MTCE12MTCE13M
CODE1MTBE00A1MTBE10A1MTBE20A1MTBE30A1MTBE40A1MTBE50A1MTBE60A1MTBE70A1MTBE80A1MTBE90A1MTBE91A1MTBE92A1MTBE93A1MTBE94A
Made of tempered, hardened light alloy.High twisting resistance, suitablefor applications requiring minimumprojection.Available with metal washers only.
d
t
f
e
NORMA DIN 908 type
f8
12121212141414141616161616
d1417192123252729293232363640
t33333444444445
e56688
101012121212171717
f8
1212141616161620
GAS1/8”1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
d141822263240495568
t333445555
e568
101217222432
£1.82£2.01£2.19£2.92£3.82£5.43£13.20£16.48£34.07
PRICE£1.82£1.95£2.01£2.19
£3.11£2.92£5.59£5.59£5.69£6.11£6.25£6.25£6.38
£2.41
PRICE
drain Filling plugs
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 557 06/11/2014 15:15
558 • Accessories for hydrAulic components
TCFilling plug
CODE1GTCO00A1GTCO10A1GTCO20A1GTCO30A1GTCO40A1GTCO50A1GTCO60A1GTCO70A1GTCO80A
TYPETC0GTC1GTC2GTC3GTC4GTC5GTC6GTC7GTC8G
TYPETC 0MTC1MTC2MTC3MTC4MTC5MTC6MTC7MTC8MTC9MTC10MTC11MTC12M
CODE1MTCO00A1MTCO10A1MTCO20A1MTCO30A1MTCO40A1MTCO50A1MTCO60A1MTCO70A1MTCO80A1MTCO90A1MTCO91A1MTCO92A1MTCO93A
Tight-sealing, maximumresistance to twistingand overheating.
t
f
e
t 5 6 7 7 7 8,5 8 8 8 8101012
f88
1010101012121214151517
e14172222242730323640505570
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 226 x 1,530 x 233 x 242 x 348 x 360 x 4
t 5 7,5 8,5 8,5 9,5 9,5101012
GAS1/8”1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
f88
10101214151517
e141722273240505570
£2.63£2.73£2.84£3.94£5.86£8.98£16.15£18.78£34.31
PRICE£2.63£2.73£2.84£3.74
£3.94£6.54£7.05£9.20£9.97£16.15£20.87£34.31
£4.28
PRICE
TSCDrain plug
CODE1MTSC00A1MTSC10A1MTSC20A1MTSC30A1MTSC40A1MTSC50A1MTSC60A1MTSC70A1MTSC80A1MTSC90A1MTSC91A1MTSC92A1MTSC93A
TYPETSC0MTSC1MTSC2MTSC3MTSC4MTSC5MTSC6MTSC7MTSC8MTSC9MTSC10MTSC11MTSC12M
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 226 x 1,530 x 233 x 242 x 348 x 360 x 4
CODE1GTSC00A1GTSC10A1GTSC20A1GTSC30A1GTSC40A1GTSC50A1GTSC60A1GTSC70A1GTSC80A
TYPETSC0GTSC1GTSC2GTSC3GTSC4GTSC5GTSC6GTSC7GTSC8G
Tight-sealing, maximumresistance to twistingand overheating.
GAS1/8”1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
f88
10101214151517
e141722273240505570
t 5 7,5 8,5 8,5 9,5 9,5101012
t 5 6 7 7 7 8,5 8 8 8 8101012
e14172222242730323640505570
f88
1010101012121214151517
f
t
e
£2.63£2.73£2.84£3.94£5.86£8.98£16.15£18.78£34.31
PRICE£2.63£2.73£2.84£3.74
£3.94£6.54£7.05£9.20£9.97£16.15£20.87£34.31
£4.28
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 558 06/11/2014 15:15
Accessories for hydrAulic components • 559
TC/FFilling plug
CODE1GC/F00A1GC/F10A1GC/F20A1GC/F30A1GC/F40A1GC/F50A
TYPETC/F0GTC/F1GTC/F2GTC/F3GTC/F4GTC/F5G
t 7 9,51010,510,512
f889
111212,5
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,5
CODE1MC/F00A1MC/F10A1MC/F20A1MC/F30A1MC/F40A1MC/F50A
TYPETC/F0MTC/F1MTC/F2MTC/F3MTC/F4MTC/F5M
t78
1089
10,5
8899
1011
f e101718202222
d142022262828
GAS1/8”1/4”3/8”1/2”3/4”1”
d142022283240
e101718222734
Tight-sealing, maximum resistanceto twisting and overheating.
Head milling produces a crownwith greater sealing area againstthe crankcase.
d
t
f
e
£2.48£2.66£3.06£4.02£6.85£8.77
PRICE£2.48£2.66£3.06£3.35
£4.02£3.85
PRICE
TSC/FDrain plug
CODE1GS/F00A1GS/F10A1GS/F20A1GS/F30A1GS/F40A1GS/F50A
TYPETSC/F0GTSC/F1GTSC/F2GTSC/F3GTSC/F4GTSC/F5G
t 7 9,51010,510,512
f889
111212,5
GAS1/8”1/4”3/8”1/2”3/4”1”
d142022283240
e101718222734
MB series10 x 114 x 1,516 x 1,518 x 1,520 x 1,522 x 1,5
t78
1089
10,5
8899
1011
f e101718202222
TYPETSC/F0MTSC/F1MTSC/F2MTSC/F3MTSC/F4MTSC/F5M
CODE1MS/F00A1MS/F10A1MS/F20A1MS/F30A1MS/F40A1MS/F50A
d142022262828
Tight-sealing, maximum resistanceto twisting and overheating.
Head milling produces a crownwith greater sealing area againstthe crankcase.
f
t
d
e
£2.48£2.66£3.06£4.02£6.85£8.77
PRICE£2.48£2.66£3.06£3.35
£4.02£3.85
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 559 06/11/2014 15:15
560 • Accessories for hydrAulic components
Visual leVel indicaTors
TLPVisual level indicatornon-threaded
CODE
1PTPO00A1PTPO10A1PTPO20A1PTPO30A1PTPO40A1PTPO50A
TYPE
TLP0TLP1TLP2TLP3TLP4TLP5
O - R
OROROROROROR
115119128310031183131
p
999
101010
d
202430343842
t
568888
v
111316212727
Ø fH11
172026303538
v
p t
df
Transparent inspection windowunaffected by high or low temperatures.
Avoid contact with alcoholand solvents.
O-ring for pressure assembly.
£6.04£6.48£7.97£9.43£12.72£14.02
PRICE
TLAVisual level indicator
v1013162127374050
e1722273240505570
7799
10101014
tf89
101114151517
GAS1/4”3/8”1/2”3/4”1”1”1/41”1/22”
CODE1GTLN10A1GTLA20A1GTLA30A1GTLA40A1GTLA50A1GTLA60A1GTLA70A1GTLA80A
TYPETLAN1GTLA2GTLA3GTLA4GTLA5GTLA6GTLA7GTLA8G
CODE1MTLN10A1MTLA20A1MTLA30A1MTLA40A1MTLA50A1MTLA60A1MTLA70A1MTLA80A1MTLA90A1MTLA91A1MTLA92A1MTLA93A1MTLA94A1MTLA95A1MTLA96A1MTLA97A1MTLA98A1MTLA99A1MTLA999
TYPETLAN1MTLA2MTLA3MTLA4MTLA5MTLA6MTLA7MTLA8MTLA9MTLA10MTLA11MTLA12MTLA13MTLA14MTLA15MTLA16MTLA17MTLA18MTLA19M
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 1,524 x 225 x 1,527 x 1,530 x 1,530 x 233 x 1,533 x 235 x 1,540 x 1,542 x 348 x 360 x 260 x 4
f899
10101111111111111414141215151717
t77779999999
1010101010101414
v10131316161616212121212727273737405050
e17222224273030323236364040405050557070
f t
e
v
Standard polycarbonate transparent inspectionwindow unaffected by high or low temperatures.
Avoid contacts with alcohol and solvents.
Special version:with Pyrex glass for high temperatures.
By request:with anchor nutfor unthreadedhole.
£4.82£5.15£5.77£6.85£9.74£19.41£22.66£43.44
PRICE
£4.55£4.86£5.02£5.27
£8.14£8.63£8.63£9.11£9.48£9.48£9.74£9.74£15.25£18.85£19.41£22.66£43.44£43.44
£5.44
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 560 06/11/2014 15:15
Accessories for hydrAulic components • 561
TLA/FVisual level indicatorwith milled head
GAS3/8”1/2”3/4”1”1”1/4
v1016212737
t99
111212
CODE1GL/F10A1GL/F20A1GL/F30A1GL/F40A1GL/F50A
TYPETLA/F1GTLA/F2GTLA/F3GTLA/F4GTLA/F5G
d2228324050
f9
1012
1512,5
e1822273446
MB series16 x 1,518 x 1,520 x 1,522 x 1,5
v10131616
e18202222
99
1010
f t9999
d22262828
TYPETLA/F1MTLA/F2MTLA/F3MTLA/F4M
CODE1ML/F10A1ML/F20A1ML/F30A1ML/F40A
f t
d
v
e
Standard polycarbonate transparentinspection window unaffected by highor low temperatures.Avoid contacts with alcoholand solvents.Head milling produces a crownwith greater sealing area againstthe crankcase.Special version:with Pyrex glass for high temperatures.
£5.35£6.11£7.32£10.26£20.17
PRICE£5.35£5.59£5.95£6.11
PRICE
TLAXVisual level indicatorwith glass
Transparent inspection window in Pyrexglass suitable for high and low temperaturesfrom - 20°C till + 200°C max.
Supplied complete with internal Viton washer.
By request supplied in brass.
GAS1/4”3/8”1/2”3/4”1”1”1/41”1/22”
f89
101114151517
e1722273240505570
CODE1GTLX10A1GTLX20A1GTLX30A1GTLX40A1GTLX50A1GTLX60A1GTLX70A1GTLX80A
TYPETLAX1GTLAX2GTLAX3GTLAX4GTLAX5GTLAX6GTLAX7GTLAX8G
v1013162127374050
t9
1099
10101014
MB Series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,527 x 1,533 x 1,533 x 235 x 1,540 x 1,542 x 3
f899
1010111414141215
t9
101010
99
1010101010
1013131616212727273737
v e1722222427324040405050
TYPETLAX1MTLAX2MTLAX3MTLAX4MTLAX5MTLAX6MTLAX7MTLAX8MTLAX9MTLAX10MTLAX11M
CODE1MTLX10A1MTLX20A1MTLX30A1MTLX40A1MTLX50A1MTLX60A1MTLX70A1MTLX80A1MTLX90A1MTLX91A1MTLX92A
f t
e
v
£9.64£10.57£13.64£16.79£21.38£34.49£35.95£35.95
PRICE
£9.64£10.57£12.72£13.46£13.64£19.48£24.01£24.01£27.25£37.58£39.75
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 561 06/11/2014 15:15
562 • Accessories for hydrAulic components
OBLÒ
v
Ø 148
id s
21,5
TYPE
OBLÒ
CODE
1OBLO40A Ø 202 Ø 180
div
s
O-ring
45°
Inspection porthole or liquid-level ø 148
Made of aluminium light alloy with tempered glass; supplied completewith gum washers, anchor screws and O-ring.
For the tightening to build a centralhole of 148 mm and 8threaded holes M6arranged 45° on adiameter withinter-axis of 180 mm.The thickness of thereservoir must notbe less than 5 mm.
£98.23
PRICE
MAX
MIN
MAX
MIN
OBLÒInspection porthole or liquid-level ø 100
v
Ø 100
id s
19,5
TYPE
OBLÒCODE
1OBLO30A Ø 150 Ø 130
Made of aluminium light alloy with tempered glass; supplied completewith gum washers, anchor screws and O-ring.
s
div
O-ring
60°
For the tightening to build a centralhole of 100 mm and 6threaded holes M6arranged 60° on adiameter withinter-axis of 130 mm.The thickness of thereservoir must notbe less than 5 mm.
£72.08
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 562 06/11/2014 15:15
Accessories for hydrAulic components • 563
GTSFLevel indicator unitwith breather plug
CODE1GGSF10M1GGSF20M1GGSF30M1GGSF40M
TYPEGTSF1GGTSF2GGTSF3GGTSF4G
GAS3/8”1/2”3/4”1”
v16162127
27273240
e30304040
q20212226
a46466060
b43435255
c11111116
f22222732
E MB series16 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
CODE1MGSF10M1MGSF20M1MGSF30M1MGSF40M1MGSF50M1MGSF60M1MGSF70A
TYPEGTSF1MGTSF2MGTSF3MGTSF4MGTSF5MGTSF6MGTSF7M
v16161616162127
e27272727303640
q30303030404040
a20212121222626
b46464646606060
c43434343525255
f11111111111416
E22222222272732
a
b
c f
v
eq
E This unit was designed to satisfyboth technical and economicalrequirements, because it can beapplied with a single hole obtainingthree services: oil filling, vapor venting,level indication.
Avoid contact with alcohol and solvents.
£43.10£44.80£55.43£63.91
PRICE£43.10£43.53£44.16£44.80
£62.90£63.91
£59.25
PRICE
IFCDome-shapedlevel gauge
ftc
v
e
6 6 809,509,510101110,510,510,510,514
16161616141818232523333642
24242427303232364040505560
99999
1313151717232428
16x 1,518x 1,520 x 1,522 x 1,524 x 1,525 x 1,527 x 1,530 x 1,533 x 1,535 x 1,540 x 1,545 x 1,552 x 1,5
t 609,5101010,510,514
v16161925333642
f8
101114151517
CODE1GIFC00A1GIFC10A1GIFC20A1GIFC30A1GIFC40A1GIFC50A1GIFC60A
TYPEIFC0GIFC1GIFC2GIFC3GIFC4GIFC5GIFC6G
GAS3/8”1/2”3/4”1”
1”1/41”1/22”
e24273240505570
c99
1317232428
TYPEI FC0MIFC0MIFC1MIFC2MIFC3MIFC4MIFC5MIFC6MIFC7MIFC8MIFC9MIFC10MIFC11M
CODE1MIFC00A1MIFC01A1MIFC10A1MIFC20A1MIFC30A1MIFC40A1MIFC50A1MIFC60A1MIFC70A1MIFC80A1MIFC90A1MIFC95A1MIFC99A
f88
1010111111111414151517
t v e cMB series
Transparent glass that does not alterat high and low temperatures.It is particularly suitable for seeing the fluidfrom the side, as well as the circulationof fluid from the top.Avoid contact with alcohol and solvents.It is supplied with fixing nutfor non- threaded holes on request.
£5.26£5.77£6.85£9.74£21.70£25.33£43.44
PRICE £5.26£5.26£6.85£5.77
£8.63£10.72£11.17£11.46£15.25£22.18£24.81£43.44
£8.63
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 563 06/11/2014 15:15
564 • Accessories for hydrAulic components
TCLA/ZFilling plug with dipstick
h1213,516,52021,5202020
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
f8
10101214151517
g55555555
d2226304045555570
CODE1GLAZ10A1GLAZ20A1GLAZ30A1GLAZ40A1GLAZ50A1GLAZ60A1GLAZ70A1GLAZ80A
l120170170200200250250250
TYPETCLA/Z1GTCLA/Z2GTCLA/Z3GTCLA/Z4GTCLA/Z5GTCLA/Z6GTCLA/Z7GTCLA/Z8G
f8
10101010121214
g55555555
d2226263030364245
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
CODE1MLAZ10A1MLAZ20A1MLAZ30A1MLAZ40A1MLAZ50A1MLAZ60A1MLAZ70A1MLAZ80A
l120170170170170200200200
h1212121515152020
TYPETCLA/Z1MTCLA/Z2MTCLA/Z3MTCLA/Z4MTCLA/Z5MTCLA/Z6MTCLA/Z7MTCLA/Z8M
d
h
f
l
g
Caulked
Threaded plug with knurled round headfor hand-tightening.Built-in dipstick.Available on request with variousmin. and max. notches and lengths.
£5.77£6.41£7.50£10.82£14.84£20.35£24.94£45.00
PRICE
£5.77£6.41£6.69£7.28£7.50£11.23£14.37£14.84
PRICE
Caulked
tf
l
g
e
TCLAFillin plug with dipstick
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 242 x 348 x 360 x 4
CODE1MCLA10A1MCLA20A1MCLA30A1MCLA40A1MCLA50A1MCLA60A1MCLA70A1MCLA80A1MCLA90A1MCLA95A1MCLA99A
l120170170170170200200200250250250
TYPETCLA1MTCLA2MTCLA3MTCLA4MTCLA5MTCLA6MTCLA7MTCLA8MTCLA9MTCLA10MTCLA11M
CODE1GCLA10A1GCLA20A1GCLA30A1GCLA40A1GCLA50A1GCLA60A1GCLA70A1GCLA80A
l120170170200200250250250
TYPETCLA1GTCLA2GTCLA3GTCLA4GTCLA5GTCLA6GTCLA7GTCLA8G
Hex-head threaded plugwith built-in dipstick.
Also available in various min.and max. notches and lengths.
t67777888
101012
f8
10101010121214151517
g55555555555
e1722222427303640505570
t 6 8,5 8,5 9,5 9,5101012
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
f8
10101214151517
g55555555
e1722273240505570
£5.67£6.28£7.35£10.72£13.92£20.22£24.43£42.38
PRICE
£5.67£6.28£6.82£7.00£7.35£10.76£14.07£14.66£20.22£25.72£44.62
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 564 06/11/2014 15:15
Accessories for hydrAulic components • 565
TCLS
CODE1GCSL10A1GCSL20A1GCSL30A1GCSL40A1GCSL50A1GCSL60A1GCSL70A1GCSL80A
l120170170200200250250250
TYPETCLS1GTCLS2GTCLS3GTCLS4GTCLS5GTCLS6GTCLS7GTCLS8G
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 242 x 348 x 360 x 4
CODE1MCSL10A1MCSL20A1MCSL30A1MCSL40A1MCSL50A1MCSL60A1MCSL70A1MCSL80A1MCSL90A1MCSL95A1MCSL99A
l120170170170170200200200250250250
TYPETCLS1MTCLS2MTCLS3MTCLS4MTCLS5MTCLS6MTCLS7MTCLS8MTCLS9MTCLS10MTCLS11M
Caulked
t
l
g
f
e
Threaded plug with hex head and breather holefor venting internal pressure.Built-in dipstick.Available with various min. and max. notches and lengths.For applications requiring extra-tight sealing, type LSF is recommended.
t688999
1012141414
f8
10101010121214151517
g55555555555
e1722222427303640505570
t6899
12141414
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
f8
10101214151517
g55555555
e1722273240505570
Filling plug with dipstickand breather hole
£6.04£6.64£7.72£11.05£15.07£20.56£26.15£45.05
PRICE
£6.04£6.64£7.00£7.32£7.72£11.13£14.48£15.07£20.56£26.15£45.05
PRICE
TCLS/Zh
f
l
g
Caulked
d
CODE1GLSZ10A1GLSZ20A1GLSZ30A1GLSZ40A1GLSZ50A1GLSZ60A1GLSZ70A1GLSZ80A
l120170170200200250250250
TYPETCLS/Z1GTCLS/Z2GTCLS/Z3GTCLS/Z4GTCLS/Z5GTCLS/Z6GTCLS/Z7GTCLS/Z8G
MB series14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
CODE1MLSZ10A1MLSZ20A1MLSZ30A1MLSZ40A1MLSZ50A1MLSZ60A1MLSZ70A1MLSZ80A
l120170170170170200200200
h1212121515152021,5
TYPETCLS/Z1MTCLS/Z2MTCLS/Z3MTCLS/Z4MTCLS/Z5MTCLS/Z6MTCLS/Z7MTCLS/Z8M
h1213,516,52021,5202020
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
f8
10101214151517
g55555555
d2226304045555570
f8
10101010121214
g55555555
d2226263030364245
Filling plug with dipstick and breatherThreaded plug with knurled round headfor hand-tightening.Hole for venting internal pressure.Built-in dipstick.Available in various max. and min. notches and lengths on request.For applications requiring extratight sealing,type LSF is recommended.
£6.28£6.87£8.10£11.38£15.48£21.00£25.64£45.46
PRICE
£6.28£6.87£7.28£7.89£8.10£11.89£15.00£15.48
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 565 06/11/2014 15:15
566 • Accessories for hydrAulic components
ILAF
d16,522222426303038505570
h1720202122242529333340
g55555555555
e1722222427303640505570
f89
101010121214151517
Serie MB14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 242 x 348 x 360 x 4
COD.1MIFA00A1MIFA10A1MIFA20A1MIFA30A1MIFA40A1MIFA50A1MIFA60A1MIFA70A1MIFA80A1MIFA90A1MIFA95A
l120170170170170200200200250250250
TIPOILAF0MILAF1MILAF2MILAF3MILAF4MILAF5MILAF6MILAF7MILAF8MILAF9MILAF10M
d16,522263038505570
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
h1720222429333340
g55555555
e1722273240505570
f89
101214151517
COD.1GIFA00A1GIFA10A1GIFA20A1GIFA30A1GIFA40A1GIFA50A1GIFA60A1GIFA70A
l120170170200200250250250
TIPOILAF0GILAF1GILAF2GILAF3GILAF4GILAF5GILAF6GILAF7G
h
l
f
d
g
Caulked
e
Level indicator with breatherVersion for threaded holes.Large chamber with cut perpendicular to the axis protected by itscover of galvanized steel that keeps out foreign bodiesand vents internal pressure.Built-in dipstick.Also available in various min. and max.notches and lengths.For applications requiring extratight sealing, type LSF is recommended.
£10.56£10.56£11.26£13.79£19.36£30.79£36.31£71.23
PRICE
£10.56£10.56£10.76£10.99£11.26£13.74£18.85£19.36£30.80£36.31£71.23
PRICE
ILALevelindicator
d
h
pf
g
lCaulked
CODE
1PILA00A1PILA10A1PILA20A1PILA30A1PILA40A1PILA50A
TYPE
ILA0ILA1ILA2ILA3ILA4ILA5
O - R
OROROROROROR
108115119
308131004112
g
555555
l120170170170200200
h121215151818
p
2099
111414
ØfH11
121720253035
d212530323640
O-ring version for smooth holes.
Knurled round head.
Built-in dipstick.
Also available with different min.and max. notches and lengths.
£11.28£10.41£11.33£12.43£15.18£18.20
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 566 06/11/2014 15:15
Accessories for hydrAulic components • 567
LSFLevel indicator with breather
COD.1GLSF10A1GLSF20A1GLSF30A1GLSF40A1GLSF50A
TIPOLSF1GLSF2GLSF3GLSF4GLSF5G
GAS1/4”3/8”1/2”3/4”1”
911111214
f170170170200200
l8
10101010
g1722273240
ed16,522263038
h17,519202429
Serie MB14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 2
COD.1MLSF10A1MLSF20A1MLSF30A1MLSF40A1MLSF50A1MLSF60A1MLSF70A1MLSF80A
TIPOLSF1MLSF2MLSF3MLSF4MLSF5MLSF6MLSF7MLSF8M
911111111121414
f170170170170170170200200
l8
10101010101010
g1722222427303640
ed16,522222426303038
h17,519192020242529
Breather plug and level indicator with galvanized-steelcover and suitably designed internal valve calibratedfrom 0,05 to 0,10 bar, that opens at intervals to ventinternal pressure created by fluid turbulence.
It is especially recommended for applicationson high-rpm speed-change gears.
d
h
f
Caulked
l
g
e
£14.00£15.45£16.72£20.07£27.05
PRICE
£14.00£15.45£15.85£16.43£16.72£19.50£26.37£27.05
PRICE
ILASLevel indicatorwith breather
CODE
1PISA10A1PISA20A1PISA30A1PISA40A1PISA50A
TYPE
ILAS1ILAS2ILAS3ILAS4ILAS5
O - R
OROROROROR
115119
308131004112
g
55555
l
170170170200200
d
Caulked
h
pf
g
l
h
1819212630
p
99
111414
Ø fH11
1720253035
d
2226303850
O-ring version for smooth holes.Large chamber with cut perpendicular to the axisprotected by its cover of galvanized steel that keepsout foreign bodies and vents internal pressure.Built-in dipstick.Also available in various min. and max. notches and lengths.
£11.23£11.69£14.02£19.69£31.31
PRICE
ILAF
d16,522222426303038505570
h1720202122242529333340
g55555555555
e1722222427303640505570
f89
101010121214151517
Serie MB14 x 1,516 x 1,518 x 1,520 x 1,522 x 1,524 x 230 x 233 x 242 x 348 x 360 x 4
COD.1MIFA00A1MIFA10A1MIFA20A1MIFA30A1MIFA40A1MIFA50A1MIFA60A1MIFA70A1MIFA80A1MIFA90A1MIFA95A
l120170170170170200200200250250250
TIPOILAF0MILAF1MILAF2MILAF3MILAF4MILAF5MILAF6MILAF7MILAF8MILAF9MILAF10M
d16,522263038505570
GAS1/4”3/8”1/2”3/4”1”1” 1/41” 1/22”
h1720222429333340
g55555555
e1722273240505570
f89
101214151517
COD.1GIFA00A1GIFA10A1GIFA20A1GIFA30A1GIFA40A1GIFA50A1GIFA60A1GIFA70A
l120170170200200250250250
TIPOILAF0GILAF1GILAF2GILAF3GILAF4GILAF5GILAF6GILAF7G
h
l
f
d
g
Caulked
e
Level indicator with breatherVersion for threaded holes.Large chamber with cut perpendicular to the axis protected by itscover of galvanized steel that keeps out foreign bodiesand vents internal pressure.Built-in dipstick.Also available in various min. and max.notches and lengths.For applications requiring extratight sealing, type LSF is recommended.
£10.56£10.56£11.26£13.79£19.36£30.79£36.31£71.23
PRICE
£10.56£10.56£10.76£10.99£11.26£13.74£18.85£19.36£30.80£36.31£71.23
PRICE
ILALevelindicator
d
h
pf
g
lCaulked
CODE
1PILA00A1PILA10A1PILA20A1PILA30A1PILA40A1PILA50A
TYPE
ILA0ILA1ILA2ILA3ILA4ILA5
O - R
OROROROROROR
108115119
308131004112
g
555555
l120170170170200200
h121215151818
p
2099
111414
ØfH11
121720253035
d212530323640
O-ring version for smooth holes.
Knurled round head.
Built-in dipstick.
Also available with different min.and max. notches and lengths.
£11.28£10.41£11.33£12.43£15.18£18.20
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 567 06/11/2014 15:15
568 • Accessories for hydrAulic components
Registered model
variable data on customer’s request (max. 900 mm)*
TYPE
TC/ZLG1GTC/ZLG2GTC/ZLG3GTC/ZLG4G
OIL CODE
1LGTM3041LGTM3051LGTM3061LGTM307
DIESEL CODE
1LGTM3001LGTM3011LGTM3021LGTM303
GAS
2”2”2”2”
L200300350400
d70707070
h25252525
f12121212
l192292342392
TYPE
TC/ZLG1MTC/ZLG2MTC/ZLG3MTC/ZLG4M
OIL CODE
1LGTM4041LGTM4051LGTM4061LGTM407
DIESEL CODE
1LGTM4001LGTM4011LGTM4021LGTM403
METRIC
60 X 260 X 260 X 260 X 2
L200300350400
d70707070
h25252525
f12121212
l192292342392
Composed of aluminium light alloy male coverwith visual dial.Complete with float system, it allows an exactand constant indication of the level of fluid inside the tank.Especially designed for application on agricultural,earth moving, building machineryand hydraulic units.Supplied with O-ring.Temperature during use 80°C max.By request with breather.Avoid contacts with alcohol and solvents.
Visual level indicatorwith float system
TC/ZLGd
L
h
f
l
1/2
1/4
10
3/4
£68.50£69.70£70.31£70.96
PRICE
£68.50£69.70£70.31£70.96
PRICE
Registered model
TRBF/LGVisual level indicatorwith float system
variable data on customer’s request (max. 900 mm)*
TYPE
TRBF/LG1MTRBF/LG2MTRBF/LG3MTRBF/LG4M
OIL CODE
1LGBS4011LGBS4021LGBS4031LGBS404
DIESEL CODE
1LGBS4051LGBS4061LGBS4071LGBS408
60 X 260 X 260 X 260 X 2
METRIC200300350400
L65656565
d56565656
h24242424
p
160260310360
l57575757
f
TYPE
TRBF/LG1GTRBF/LG2GTRBF/LG3GTRBF/LG4G
OIL CODE
1LGBS3011LGBS3021LGBS3031LGBS304
DIESEL CODE
1LGBS3051LGBS3061LGBS3071LGBS308
2”2”2”2”
GAS200300350400
L65656565
d56565656
h24242424
p
160260310360
l57575757
f
Composed of aluminium light alloy female coverwith visual dial.It is screwed on burnished steel sleeve whichis welded onto the machine cover or tank.Complete with float system, it allows an exactand constant indication of the level of fluid inside the tank.Especially designed for application on agricultural,earth moving, building machinery and hydraulic units.Temperature during use 80°C max.By request with breather. Avoid contacts withalcohol and solvents.It can be supplied with or without sleeve.
L
f
d
h
p
lAsta elicoidale
1/2
1/4
10
3/4
£75.74£77.02£77.59£78.37
PRICE
£75.74£77.02£77.59£78.37
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 568 06/11/2014 15:15
Accessories for hydrAulic components • 569
* variable data on customer’s request (max. 200 mm)
b
40404040
e22222222
q30303030
D22222222
c43434343
f10101010
3/8”3/8”3/8”3/8”
aCODE
1GLVS10A1GLVS20A1GLVS30A1GLVS40A
TYPE
GLVS1GGLVS2GGLVS3GGLVS4G
d20202020
L
b
eq
L*50
100150200
Transparentpolycarbonate
Breathercap
O -Rings
Gasket
Tighteningjoint
a
cf
ø d
D
Vertical level indicator with single threadto control fluid level.Realized with black anodizated aluminiumlight alloy little blocks and transparent tube;available completed with O-Rings.Avoid contact with petrol, benzine, alcohol,petroleum, toluol and glycol.
GLVSVertical level indicatorwith single thread
£39.88£41.44£43.51£45.64
PRICE
r
d
h
l L*
LGF68Flanged level indicatorwith float system
* variable data on customer’s request (max. 900 mm)
200250300350400
1616161616
6868686868
8080808080
203253303353403
TYPE
LGF681LGF682LGF683LGF684LGF685
OIL CODE GASOIL CODE
1LGF68011LGF68021LGF68031LGF68041LGF6805
1LGF68061LGF68071LGF68081LGF68091LGF6810
L* d h l r
Composed of aluminium light alloy flangedcover with orientable dial.Applicable to holes 50 to 54 mm.Complete with float system, it allows an exactand constant indication of the level of fluidinside the tank.Supplied with O-ring and allen screw M4 forthe fixing.Especially designed for application onagricultural, earth moving, buildingmachinery and hydraulic units.Temperature during use 80°C max.Avoid contacts with alcohol and solvents.On request, provided in different colours.
Registered model
£81.80£82.56£83.20£84.05£84.87
PRICE
Registered model
variable data on customer’s request (max. 900 mm)*
TYPE
TC/ZLG1GTC/ZLG2GTC/ZLG3GTC/ZLG4G
OIL CODE
1LGTM3041LGTM3051LGTM3061LGTM307
DIESEL CODE
1LGTM3001LGTM3011LGTM3021LGTM303
GAS
2”2”2”2”
L200300350400
d70707070
h25252525
f12121212
l192292342392
TYPE
TC/ZLG1MTC/ZLG2MTC/ZLG3MTC/ZLG4M
OIL CODE
1LGTM4041LGTM4051LGTM4061LGTM407
DIESEL CODE
1LGTM4001LGTM4011LGTM4021LGTM403
METRIC
60 X 260 X 260 X 260 X 2
L200300350400
d70707070
h25252525
f12121212
l192292342392
Composed of aluminium light alloy male coverwith visual dial.Complete with float system, it allows an exactand constant indication of the level of fluid inside the tank.Especially designed for application on agricultural,earth moving, building machineryand hydraulic units.Supplied with O-ring.Temperature during use 80°C max.By request with breather.Avoid contacts with alcohol and solvents.
Visual level indicatorwith float system
TC/ZLGd
L
h
f
l
1/2
1/4
10
3/4
£68.50£69.70£70.31£70.96
PRICE
£68.50£69.70£70.31£70.96
PRICE
Registered model
TRBF/LGVisual level indicatorwith float system
variable data on customer’s request (max. 900 mm)*
TYPE
TRBF/LG1MTRBF/LG2MTRBF/LG3MTRBF/LG4M
OIL CODE
1LGBS4011LGBS4021LGBS4031LGBS404
DIESEL CODE
1LGBS4051LGBS4061LGBS4071LGBS408
60 X 260 X 260 X 260 X 2
METRIC200300350400
L65656565
d56565656
h24242424
p
160260310360
l57575757
f
TYPE
TRBF/LG1GTRBF/LG2GTRBF/LG3GTRBF/LG4G
OIL CODE
1LGBS3011LGBS3021LGBS3031LGBS304
DIESEL CODE
1LGBS3051LGBS3061LGBS3071LGBS308
2”2”2”2”
GAS200300350400
L65656565
d56565656
h24242424
p
160260310360
l57575757
f
Composed of aluminium light alloy female coverwith visual dial.It is screwed on burnished steel sleeve whichis welded onto the machine cover or tank.Complete with float system, it allows an exactand constant indication of the level of fluid inside the tank.Especially designed for application on agricultural,earth moving, building machinery and hydraulic units.Temperature during use 80°C max.By request with breather. Avoid contacts withalcohol and solvents.It can be supplied with or without sleeve.
L
f
d
h
p
lAsta elicoidale
1/2
1/4
10
3/4
£75.74£77.02£77.59£78.37
PRICE
£75.74£77.02£77.59£78.37
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 569 06/11/2014 15:15
570 • Accessories for hydrAulic components
CODE1GLVX10A1GLVX20A1MLVX10A
CODE1MLVX20A1MLVX30A1MLVX40A
TYPEGLVX1GGLVX2GGLVX1M
TYPEGLVX2MGLVX3MGLVX4M
127254127
254127254
e222222
q303030
d282828
c434343
f101010
v75
20275
3/8”3/8”
a e222222
q303030
d282828
c434343
f101010
v202
75202
aL* L*
GLVXVertical level indicatorwith double thread, withpyrex glass and protection
Vertical level indicator with doublethread to control fluid level.
Realized with aluminium light alloy littleblocks, trasparent tube made in pyrexglass and Viton O-Rings.
Suitable for low and high temperatures- 20°C + 200°C max.
Supplied complete with protection.
b161616
b16161610x1,5
10x1,512x1,7512x1,75
e
O -Rings
a
cf
ø d
q
b
v L
a
£96.16£117.71£96.16
PRICE£117.71£96.16£117.71
PRICE
*
b40404040
e22222222
q30303030
d22222222
c43434343
f10101010
3/8”3/8”3/8”3/8”
aCODE1GGLV10A1GGLV20A1GGLV30A1GGLV40A
TYPEGLV1GGLV2GGLV3GGLV4G
b
b
eq
L
O -Rings
c
a
d
a
ø
f
500100015002000
L*
Vertical level indicator with double thread to controlfluid level.Realized with black anodizated aluminium light alloylittle blocks and transparent tube; availablecompleted with O-Rings.Avoid contact with petrol, benzine, alcohol,petroleum, toluol and glycol.
GLVVertical level indicatorwith double thread
£81.05£95.96£114.14£132.34
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 570 06/11/2014 15:15
Accessories for hydrAulic components • 571
eq
sf c
a
L*
ød
a
Tightening joint
Transparentpolycarbonate
O -Rings
CODE1GLVE10A1GLVE20A
CODE1GLVE30A1GLVE40A
TYPEGLVE1GGLVE2G
TYPEGLVE3GGLVE4G
5001000
15002000
e2222
q3030
d2222
c4343
f1010
s6565
3/8”3/8”
a e2222
q3030
d2222
c4343
f1010
s6565
3/8”3/8”
aL*
* variable data on customer’s request (max. 2.000 mm)
L*
GLVEVertical level indicatorwith double electricalcontact
Used for the control of the fluid for tanks.The electrical sensor indicates theattainment of the MIN and MAX level ofthe fluid. The contacts are normallyopened, they close to the attainment ofthe MIN or MAX level.Available with length variable, on requestof customer, from a minimum of 200 mmto a maximum of 2.000 mm.Supplied complete of connectors.Electrical characteristics:Maximum load on the electrical contacts:AC till 125 Volt – 1,0 A – 10 VA, DC till100 Volt – 1,0 A – 10 VA.For further information please demandthe electrical plan. Avoid contacts withalcohol, trichloroethylene, solvents,petrol and petroleum.
£148.09£166.40
PRICE£179.06£193.61
PRICE
PLVerticallevel indicator
c16,516,516,5
i76
127254
fM 10M 12M 12
a111616
b292929
CODE
1VPLV10A1VPLV20A1VPLV30A
TYPE
PL1PL2PL3
h21,521,521,5
r343434
3788
215
vL109160287
L v
r
PL 3
MADE INITALY
c f
h
i
ca b
h
c f
i
ca b
r
L v
PL 2
MADE INITALY
Used for checking fluid level in large tanks.Complete with seals, screws and anchor nuts.Easy to assemble, it gives a tolerance of 0,5 mm alongthe interhole axis, maintaining a perfect seal.Avoid contact with alcohol, toluol and glycol.
£28.23£33.40£58.51
PRICE
*
b40404040
e22222222
q30303030
d22222222
c43434343
f10101010
3/8”3/8”3/8”3/8”
aCODE1GGLV10A1GGLV20A1GGLV30A1GGLV40A
TYPEGLV1GGLV2GGLV3GGLV4G
b
b
eq
L
O -Rings
c
a
d
a
ø
f
500100015002000
L*
Vertical level indicator with double thread to controlfluid level.Realized with black anodizated aluminium light alloylittle blocks and transparent tube; availablecompleted with O-Rings.Avoid contact with petrol, benzine, alcohol,petroleum, toluol and glycol.
GLVVertical level indicatorwith double thread
£81.05£95.96£114.14£132.34
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 571 06/11/2014 15:15
572 • Accessories for hydrAulic components
c16,516,516,5
i76
127254
fM 10M 12M 12
a111616
b292929
CODE
1VPLT10A1VPLT20A1VPLT30A
TYPE
PLT1PLT2PLT3
h21,521,521,5
r343434
3788
215
vL109160287
h
c f
i
c
a b
c f
h
i
ca b
L v
r
r
L v
PLT 2
MADE INITALY
PL T3
MADE INITALY
Used for checking fluid level in large tanks.Complete with seals, thermometer, screws and anchor nuts.Easy to assemble, it gives a tolerance of 0,5 mm alongthe interhole axis, maintaining a perfect seal.Avoid contact with alcohol, toluol and glycol.
Vertical level indicatorwith thermometer
PLT
£33.16£39.27£64.41
PRICE
PLE Vertical level indicator with electrical contact
Used for the control of the fluid for tanks.The electrical sensor indicates through avisual signal the attainment of theminimal level of the fluid.The contacts are normally opened, theyclose to the attainment of the minimallevel.Supplied complete of connector and 2,5mt cable.Electrical characteristics:Electrical protection: as per norm IP67 -Maximum load on the electrical contacts:AC till 250 Volt - 0,5 Ampère, DC till 250Volt - 0,5 Ampère. Concurred liquidspecific weight: min. 0,80 kg/dm3.For further information pleas demand theelectrical plan.Avoid contacts with alcohol,trichloroethylene and solvents.
s a b
c
i
cf
hr
L v
c16,516,5
i127254
fM 12M 12
a1616
b2929
CODE
1VPLE20A1VPLE30A
TYPE
PLE2PLE3
h21,521,5
r3434
88215
vL160287
s5959
£132.70£157.71
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 572 06/11/2014 15:15
Filling plugs
Accessories for hydrAulic components • 573
TFESFemale threaded plugwith breather
TYPETFES1M
CODE1MTFE10A
f80 x 2
d95
h40
e36
e
d
h
f
Caulked
Aluminium plug with inside threadand breather pipe, completewith gasket, suitable for large tanks.Handy grip and possibility of lockingwith Allen wrench.On request, with anodic treatment.
£28.59
PRICE
TFE/ZFemalethreaded plug
d4050556565
h2020202020
f1”1” 1/41” 1/22”60 x 2
TYPETFE/Z0GTFE/Z1GTFE/Z2GTFE/Z3GTFE/Z4M
OIL CODE1WCPA0021WCPA1021WCPA2021WCPA3021WCPA402
DIESEL CODE1WCPA0031WCPA1031WCPA2031WCPA3031WCPA403
d
h
f
Plug with internal thread inaluminium alloy for applicationson sleeves with male thread.
Optionally available withdifferent wordings.
£11.10£16.30£16.30£17.26£17.26
PRICE
PLE Vertical level indicator with electrical contact
Used for the control of the fluid for tanks.The electrical sensor indicates through avisual signal the attainment of theminimal level of the fluid.The contacts are normally opened, theyclose to the attainment of the minimallevel.Supplied complete of connector and 2,5mt cable.Electrical characteristics:Electrical protection: as per norm IP67 -Maximum load on the electrical contacts:AC till 250 Volt - 0,5 Ampère, DC till 250Volt - 0,5 Ampère. Concurred liquidspecific weight: min. 0,80 kg/dm3.For further information pleas demand theelectrical plan.Avoid contacts with alcohol,trichloroethylene and solvents.
s a b
c
i
cf
hr
L v
c16,516,5
i127254
fM 12M 12
a1616
b2929
CODE
1VPLE20A1VPLE30A
TYPE
PLE2PLE3
h21,521,5
r3434
88215
vL160287
s5959
£132.70£157.71
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 573 06/11/2014 15:15
574 • Accessories for hydrAulic components
TFES/ZFemale threaded plugwith breather
d4050556565
h2022222222
f1”1” 1/41” 1/22”60 x 2
TYPETFES/Z0GTFES/Z1GTFES/Z2GTFES/Z3GTFES/Z4M
OIL CODE1WFSZ0021WFSZ1021WFSZ2021WFSZ3021WFSZ402
DIESEL CODE1WFSZ0031WFSZ1031WFSZ2031WFSZ3031WFSZ403
Plug with internal thread in aluminiumalloy for applications on sleeves withmale thread.The spherical bronze filter of 40 micronsbuilt into the plug vents internal pressureand keeps out foreign bodies duringthe intake stroke.
d
h
f
£12.56£13.22£17.81£18.76£18.76
PRICE
TFES/ZAPlug with female thread,breather and dipstick
TYPETFES/ZA0GTFES/ZA1GTFES/ZA2GTFES/ZA3GTFES/ZA4M
OIL CODE1WFZA0021WFZA1021WFZA2021WFZA3021WFZA402
DIESEL CODE1WFZA0031WFZA1031WFZA2031WFZA3031WFZA403
Plug with internal thread in aluminium alloyfor applications on sleeves with male thread.The spherical bronze filter of 40 micronsbuilt into the plug vents internal pressureand keeps out foreign bodies duringthe intake stroke.Built-in dipstick.On request, in different lengthsand with minimum and maximum notches.
d4050556565
h2020202020
f1”1” 1/41” 1/22”
60 x 2
l200250250250250
g55555
d
f
l
g
Caulked
h
£20.28£22.20£22.20£24.02£34.32
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 574 06/11/2014 15:15
Accessories for hydrAulic components • 575
TFES/ZFFemale threaded plugwith breather
TYPETFES/ZF1GTFES/ZF2GTFES/ZF3GTFES/ZF4M
OIL CODE1WCPF1011WCPF2011WCPF3011WCPF401
DIESEL CODE1WCPF1021WCPF2021WCPF3021WCPF402
Plug with internal thread in aluminiumalloy for applications on sleeves withmale thread.A galvanized-steel cover anda spherical 40 microns bronze filtervent internal pressure and keep outforeign bodies during the intake stroke.Especially suitable in dusty environmentsand for application on agricultural andbuilding machinery. Registered model
d30383838
h21212121
f1”1” 1/22”
60 x 2
l41414141
D40556565
d
h
l
Df
£20.46£26.87£32.53£32.53
PRICE
LT 1’175500500
d468080
h455252
l6580
150
Ø r417373
f528383
c295050
N. of screws366
LT 1’
250700700
d
468080
h
455252
l
6580
150
r
417373
f
528383
c
295050
N. of screws
366
TCAR Filling plug
d
h
l
c
rf
M5 x 12
CODE1VTAR10A1VTAR20A1VTAR30A
- Trademark - Trademark - Trademark
CODE
1VTAR40A1VTAR50A1VTAR60A
- Trademark - Trademark - Trademark
404640804080
6580
150
CCC
TYPE 40 µ
TCARTCARTCAR
104610801080
6580
150
CCC
TYPE 10 µTCARTCARTCAR
With breather and trap for oil pre-filtering,made entirely of chromed steel withbayonet closure.Supplied with screws and seals forimmediate use.The air filter contained in the plug isavailable at 10 microns and 40 microns.
£26.92£32.02£35.90
PRICE
£23.87£26.48£31.64
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 575 06/11/2014 15:15
576 • Accessories for hydrAulic components
TCARSFilling plug with flangeto be welded
With breather and trap oil pre-filtering.
Made entirely of chromed steel withbayonet closure.
Supplied with flange to be welded onthe tank.
The filter inside the plug is availablewith 10 or 40 microns.
C 100C 100C 100
108010801080
CODE1VTAS30A1VTAS3021VTAS303
LT 1’500500500
d808080
h525252
l100100100
r41,541,541,5
TYPE 10 µTCARSTCARSTCARS
838383
383838
f cLabelOILDIESEL
C 100C 100C 100
408040804080
CODE1VTAS50A1VTAS5021VTAS503
LT 1’700700700
d808080
h525252
l100100100
r41,541,541,5
TYPE 40 µTCARSTCARSTCARS
838383
383838
f cLabelOILDIESEL
h
l
c
f
r
d
£36.46£36.46£36.46
PRICE
£29.38£29.38£29.38
PRICE
10801080
CODE1VTLC30A1VTLC40A
LT 1’700700
d8080
h5252
l80
150
r7373
TYPE 40 µ
TCAR/LCTCAR/LC
C 80C 150
- Label- Label
8383
5050
f7070
66
c a n. screws
C 80C 150
10801080
CODE1VTLC10A1VTLC20A
LT 1’500500
d8080
h5252
l80
150
r7373
TYPE 10 µ
TCAR/LCTCAR/LC
- Label- Label
8383
5050
f7070
66
c a n. screws
TCAR/LCFilling plug withlock-holder
With breather and trap foroil pre-filtering.
Made entirely of chromed steel withbayonet closure and lock-holder.
Supplied with slot screws M6 and sealsfor the fixing.
The air filter contained in the plug isavailable at 10 microns and 40 microns.
On request, provided with lock.
l
a
h
f
r
c
d
£36.41£41.54
PRICE
£31.42£36.54
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 576 06/11/2014 15:15
Accessories for hydrAulic components • 577
10461046104610801080
1/4“3/8“1/2“3/4“1”
GAS CODE2VTAF60A2VTAF70A2VTAF80A2VTAF90A2VTAF95A
40464046404640804080
LT 1’
250250250700700
d
4646468080
h
4141435455
f
1012141719
e
1719223036
1/4“3/8“1/2“3/4“1”
GAS CODE
2VTAF10A2VTAF20A2VTAF30A2VTAF40A2VTAF50A
TYPE 40 µ
TCARFTCARFTCARFTCARFTCARF
LT 1’175175175500500
d4646468080
h4141435455
f1012141719
e1719223036
TYPE 10 µ
TCARFTCARFTCARFTCARFTCARF
d
e
h
f
TCARFFilling plug withthreaded mount
Made entirely of chromed steel withthreaded mount and breather.The air filter contained in the plug isavailable at 10 microns and 40 microns.
£18.87£19.61£21.00£27.63£39.12
PRICE£18.12£18.83£20.20£26.85£38.20
PRICE
TRBFHermeticfilling plug
TYPE
TRBF1GTRBF2GTRBF3G
OIL CODE DIESEL CODE
1SBRF1021SBRF2021SBRF302
1SBRF1031SBRF2031SBRF303
d405565
h353745
GAS p151524
l608585
c254050
f304557
1”1” 1/22”
TYPE
TRBF4MOIL CODE DIESEL CODE
1SBRF402 1SBRF403d65
h45
METRIC p24
l85
c50
f5760 x 2
Composed of aluminium alloy femalecover with internal thread.It is screwed on UNI C30 burnishedsteel sleeve which is welded ontothe machine tank.Complete with extractable steel cartridgewhich has a filtration degree of 800 microns.
d
p
h
l
c
f
£22.00£28.21£33.14
PRICE
£33.14
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 577 06/11/2014 15:15
578 • Accessories for hydrAulic components
d405565
h353745
GAS
1”1” 1/22”
p151524
l608585
c254050
f304557
TYPE
TRBFS4MOIL CODE DIESEL CODE
1SBSF402 1SBSF403METRIC
60 x 2
d65
h45
p24
l85
c50
f57
TRBFSFilling plugwith breather
TYPE
TRBFS1GTRBFS2GTRBFS3G
OIL CODE DIESEL CODE
1SBSF1021SBSF2021SBSF302
1SBSF1031SBSF2031SBSF303
Composed of aluminium alloy female coverwith internal thread, with 40 micronsspherical bronze filter.It is screwed on UNI C30 burnished steelsleeve which is welded on the machinecover or tank.Provided with extractable steel cartridgewhich has a filtration degree of 800 microns.
d
h
p
l
c
f
£23.79£30.09£35.16
PRICE
£35.16
PRICE
d5565
h5158
p1524
l8585
c4050
f4557
r4550
e66
TYPE
TRBFSC2GTRBFSC3G
OIL CODE DIESEL CODE
1BRFC2011BRFC301
1BRFC2021BRFC302
GAS
d65
h58
p24
l85
c50
f57
r50
e660 x 2
TYPETRBFSC4M
OIL CODE DIESEL CODE1BRFC401 1BRFC402
METRIC
er
d
h
pf
l
c
1” 1/22”
Composed of a UNI C30 burnishedsteel sleeve that is welded on themachine cover or tank.Provided with extractable steel cartridgewhich has a filtration degree of 800 microns.Female cover with 40 microns sphericalbronze filter and, on request,provided with lock.
TRBFSCFilling plugwith breatherand lock-holder
£53.92£55.75
PRICE
£55.75PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 578 06/11/2014 15:15
Accessories for hydrAulic components • 579
TRBF/ZKHermetic filling plugwith key lock
d
65
h
48
f
57
p
23
c
49
b
64
l
87DIESEL CODE1KBRF303
OIL CODE1KBRF301
TYPETRBF/ZK3G
GAS2”
d65
h48
f57
p23
c49
b64
l87
DIESEL CODE1KBRF403
OIL CODE1KBRF401
TYPETRBF/ZK4M
METRIC60 x 2
Composed of light alloy female coverwith internal thread with key lock.It is screwed on UNI C30 burnishedsteel sleeve which is welded onto themachine tank.Complete with extractable steel cartridgewhich has a filtration degree of 800 microns.
d
f
h
l
b
p
c
£95.72
£95.72
PRICE
PRICE
TRBFS/AFilling plugwith breather
TYPETRBFS/A2M
CODE1SBSF50A
METRIC80 x 2
d82
h118
l49
c70
D95
e36
Composed of duraluminium female plugand UNI C30 burnished steel sleevewhich can be welded on largesize machine cover or tanks.
It is provided with breather device,with an extractable 800-microns filtercartridge made of steel.On request, supplied with sleevelenght 50 mm.
e
D
h
l
c
d
Caulked
£69.97
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 579 06/11/2014 15:15
580 • Accessories for hydrAulic components
TRTCSF/ZBreatherand filling plug
TYPE CODE GAS d g f h l c e
Threaded plug with extractable filter cartridge ingalvanized-steel.The built-in filter has a filtration degree of 40 microns.Optionally available with anchor nut for unthreaded hole,suitable for applications on Hydraulics units,Machine-tools and Earth-moving machinery.
TRTCSF/Z5GTRTCSF/Z8G
1FSFZ5021FSFZ802
1”2”
4570
33,359,4
1417
4253
82113
2549
4070
d
h
f
l
c
g
e
£33.69£93.60
PRICE
FLGVInclined flangefor side applications
CODE PRICE1YFL0003 £24.66
TYPEFLGV5G
Made of aluminium, supplied completewith washers and screws for receivingthe different types of filling, filling withbreather, breather filling and leveldipsticks, etc. see pages 34, 35 and 36.For a rapid and economic applicationtill a maximum thickness of 6 mm,it is advisable to conform to the boring jigindicated below.
M6 x 20
Gasket
4440°
1” Gas
8
59
5470
8
8 8
75
59
=
54
Ø 50
Ø 6,5 or M6
7
=
Gasket
plugs on inclined Flange
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 580 06/11/2014 15:15
Accessories for hydrAulic components • 581
TFS IBreather plugson inclined flange
TYPETSFI5G
CODE PRICE1IGTSF0A £48.41
£46.84
£43.10TYPE
TCF/ZI5GCODE PRICE
1IGCFZ0A
TYPETCSF/ZI5G
CODE PRICE1IGSFZ0A
TYPETCF/FI5G
CODE1IGF/F0A
TYPETCFI5G
CODE PRICE1IGTCF0A £41.40
£41.56
Alternative breather plugs groupare available to apply on inclinedflange when it is necessarythe side oil filling.
8
5975
8
5470
1” Gas
8 8
M6 x 20
Gasket
1” Gas
Ø2540°
46 44
Gasket
TYPETC/FI5G
CODE PRICE1IGC/F0A £41.16
TYPETCI5G
CODE PRICE1IGTCO0A £40.84
TCIFilling plugson inclined flange
TYPETC/ZI5G
CODE PRICE1IGCZO0A £42.36
Alternative filling plugs groupare available to apply on inclined flangewhen it is necessary the side oil filling.
8
5975
8
5470
1” Gas
8 8
Gasket
M6 x 20
40°
46 44
1”Gas
Ø25
Gasket
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 581 06/11/2014 15:16
582 • Accessories for hydrAulic components
. . . . .IFilling and breather plugswith level dipstickon inclined flange
TYPETCLSI5G
CODE PRICE1IGCSL0A £36.76
1”Gas
8
75 59
8
5470
88
122
40°
100
M6 x 20
Gasket
1”Gas
44CODE
1IGCLA0A
TYPETCLAI5G
CODE1IGLAZ0A
TYPETCLA/ZI5G
CODE1IGLSZ0A
TYPETCLS/ZI5G
CODE1IGIFA0A
TYPEILAFI5G
CODE1IGLSF0A
TYPELSFI5G
CODE1IGFLS0A
TYPEFMC/LSI5G
Gasket
Alternative group of filling and breather plugswith level dipsticks are availableto apply on inclined flange when it isnecessary the side level and oil filling.
PRICE£39.50
PRICE£39.50
PRICE£40.13
PRICE£44.02
PRICE£51.74
PRICE£105.74
GasketM6 x 25
Gasket
11043°
75
Ø 50
Ø 83 TCARIInclined filling plug
Similar to the TCAR, it is already suppliedmounted on an inclined aluminiumflange for application to the wallwhen the space on the tankcover permits no other solution.
The air filter contained in the plugis available at 10 micronsand 40 microns.
1080 150C
TYPE 10 µ
TCARI
CODE
1VTIR30A - Trademark
4080 150CTYPE 40 µTCARI
CODE1VTIR60A - Trademark
122
52
9
52
9
9 8098
9
£84.90
£80.43
PRICE
PRICE
50% oFF all prices
543-582 Harrier Catalogue 14 [12A].indd 582 06/11/2014 15:16