ACCESSORIES - Caponordcaponord.cba.pl/wp-content/uploads/2009/06/access_moto...ETV 1000 CAPONORD...
Transcript of ACCESSORIES - Caponordcaponord.cba.pl/wp-content/uploads/2009/06/access_moto...ETV 1000 CAPONORD...
-
ETV 1000 CAPONORDRALLY RAID
ETV 1000 CAPONORD
PEGASO I.E.
PEGASO TIBET
RST 1000 FUTURA
SL 1000 FALCO
ww
w.a
cces
sori
esap
rilia
.com
AD
VEN
TUR
E A
CC
ESSO
RIE
S
-
ETV
10
00
CA
PO
NO
RD
RA
LLY
RA
IDM
OD
EL
YEA
R
20
03
> 2
00
4
-
01 02 03 04
05 0706
ETV
10
00
CA
PO
NO
RD
RA
LLY
RA
ID2
00
3 >
20
04
MO
DE
L YE
AR
X-BOX TOP BOX
From the traffi c of the city to the thrill of the open road.A capacity of 50 litres makes the X-BOX ideal for transporting a large number of personal belongings, all secured neatly in place with the internal cross straps. Can also hold two full face helmets. Practical unilock system with just one key for fitting, removing, opening and closing. Made from impact, scratch and wear resistant polypropylene. Guaranteed water-proof thanks to the perfect seal between the strong embossed base and the painted lid. Complete with rear reflector for improved passive visibility at night.
Part No. 8792288
SUPPORT FOR X-BOX TOP BOX
Designed for safe and secure fixing.Made from steel tube with an impact and wear resistant finish, mounts securely to structural points on the bike frame in full compliance with Aprilia safety standards.
Part No. 8792173
ALUMINIUM TOP CASE
Unbeatable style for those who seek adventure.Complete with support frame and lock, designed for maximum practicality and strength. Capacity of 30 litres.
Part No. 8792331
TANK BAG
Ideal for both short trips and long distance touring.Expands upwards to give a total capacity of 23 litres. Thanks to a quick-release mechanism, it transforms in seconds into a handy back pack. Made from extra-tough nylon, with a non-scratch base to avoid spoiling the finish of your tank. Transparent top pocket for maps, etc.. Rain hood provides total weather protection. Part No. 8792174
PROTECTIVE HEADLIGHT GRILLE
Specifically designed for off-road use.Homologated for off-road use only, effectively protects the headlight against impact from stones, branches or other objects.
Part No. 8791235
For that extra touch of comfort.Used in conjunction with the standard hand guards, the heated hand grips ensure maximum comfort and safety in cold weather. The hazard warning flashers are indispensable for safety in the event of unforeseen stops or sudden deceleration, especially in conditions of poor visibility. Both functions are controlled from a single unit mounted on the handlebars.
Part No. 8796733
LOW RIDER SEAT
Comfort and safety for rider and passenger.The low rider seat, with its reduced height of just 820mm, allows for improved control and makes it easier for riders of shorter stature to rest their feet on the ground. For the passenger, the low pillion seat makes the bike more stable and affords greater comfort over long distances.
Part No. 8793685
HEATED HAND GRIPS AND 4 HAZARD WARNING FLASHERS KIT
-
ETV
10
00
CA
PO
NO
RD
20
00
> 2
00
4M
OD
EL
YEA
R
-
02 03 04
05 06
01
07 08
20
00
> 2
00
4E
TV 1
00
0 C
AP
ON
OR
DM
OD
EL
YEA
R
X-BOX TOP BOX
Perfect for everyday commuting, weekend trips and long distance touring.A capacity of 50 litres makes the X-Box ideal for transporting a large number of personal belongings, all held securely in place with the internal cross straps. Can also hold two full face helmets. Practical unilock system with just one key for fitting, removing, opening and closing. Made from impact, scratch and wear resistant polypropylene. Guaranteed water-proof thanks to the perfect seal between the strong embossed base and the lid with its original paint finish. Complete with rear reflector for improved passive visibility at night. Co-ordinated graphics and colours ensure a perfect match with the side cases. Part No. 8792288
SUPPORT FOR X-BOX TOP BOX
Essential for easy and secure top box fixing.Specially designed for the X-Box top box. Made from steel tube with a special impact and wear resistant finish, mounts securely to structural points on the bike frame in full compliance with Aprilia safety standards. Part No. 8792173
PAIR OF SIDE CASES
Unrestricted agility in urban traffic, plenty of space for holiday luggage. With a total capacity of 64 litres these cases are the ideal solution for long distance touring: each case can carry a large amount of personal belongings, all held securely in place with the internal straps, or accommodate a full-face helmet. Quick and intuitive unilock system means that just one key is all you need to fit, remove, open or close the cases. Supplied with a pair of tubular support frames, they are quick and easy to fit to the existing mounting points on the bike frame. Made from impact, scratch and wear resistant polypropylene. Guaranteed water-proof. Co-ordinated graphics and colours ensure a perfect match with the X-Box top box.
Part No. 8792295
TANK BAG
Perfect for both short trips and long distance touring.Expands upwards to give a total capacity of 23 litres. Thanks to a quick-release mechanism can also be used as a handy back pack. Made from extra-tough nylon, with a non-scratch base to avoid spoiling the finish of your tank and a transparent top pocket for road maps. The rain hood ensures total weather-proofing: elegantly finished with the Aprilia logo and reflective red trim.
Part No. 8792174
ALUMINIUM TOP CASE
Strength and practicality, in city traffic and the open road.Designed to be light, practical and tough enough to cope with all situations, this case has a capacity of 30 litres and comes complete with support frame and lock.
Part No. 8792331
ALUMINIUM SIDE CASE KIT
Ideal for the most extreme conditions.Practical, strong with an exclusive design, these cases can be combined with the Aluminium Top Case to provide a total capacity of 110 litres (each side case has a capacity of 40 litres). A single key is all you need to lock the cases as well fi t and remove them. When used without the cases, the supports act as crash protection bars for the rear of the bike.
Part No. 8104680
TAIL BAG
Practical storage for touring or everyday use.Expands in width to offer a total capacity of 38 litres—enough to accommodate two full-face helmets or a tent. Can be attached with the straps provided to the bike tail or to the pillion seat. Made from wear resistant reinforced nylon, equipped with rain hood, carrying handle and should strap. Distinctively finished with reflective red trim and the Aprilia logo.
Part No. 8792152
HEATED HAND GRIPS AND 4 HAZARD WARNING FLASHERS KIT
Part No. 8796734
Total comfort and safety, always within hand’s reach.Used in conjunction with the standard hand guards, the heated hand grips ensure maximum comfort and safety in cold weather. The hazard warning flashers are indispensable for safety in the event of unforeseen stops or sudden deceleration, especially in conditions of poor visibility. Both functions are controlled from a single unit mounted on the handlebars.
-
09 10 12
1614 15
11
17
ETV
10
00
CA
PO
NO
RD
20
00
> 2
00
4M
OD
EL
YEA
R
CENTRE STAND
Optimal stability on all terrains at all times.Especially recommended for use with top boxes and side cases, also extremely useful for city parking or during servicing. Homologated Aprilia OEM part. Impact and wear resistant finish.
Part No. 8795035
LOW SEAT AND HIGH SEAT
Comfort and safety in all situations.The Caponord ETV 1000 allows you to choose between a low or high riding position to suit the conditions or your personal preference. By reducing the height from 820mm to 800mm, the low rider seat ensures better control of the bike in all conditions and makes it easier to rest your feet on the ground. For the passenger, the low pillion seat affords superior comfort over long distances. Ideal for off-road use, the high seat gives the rider an improved view of the terrain and thanks to its reduced width, makes it easier to ride while standing on the footrests. On the same level as the rider seat, the high* pillion seat helps make it easier for the passenger to shift his bodyweight during off-road riding.
SUMP GUARD
Maximum protection from impact and damage in falls.This special component combines the strength of the tubular lattice, the low weight and impact resistance of the aluminium slide plate, with the lightness and prestige of the engine guard in natural black carbon fibre.
Part No. 8791236
BICONICAL ALUMINIUM HANDLEBAR KIT
Low weight, good looks and top performance for off-road riding.Complete kit with handlebar, lower mounting, upper clamp and handlebar weight mountings, combines low weight with smart styling and affords a more upright riding position for greater comfort off-road.
Part No. 8796735
PROTECTIVE HEADLIGHT GRILLE
Specifically designed for off-road use. Homologated for off-road use only, effectively protects the headlight against impact from stones, branches or other objects.
Part No. 8791235
ALUMINIUM EXHAUST SHIELD
Customise the look of your bike and reduce its overall weight by replacing the standard steel part with lightweight aluminium. The lighter rear end also helps improve acceleration out of sharp bends.
Part No. 8791239
FRONT MUDGUARD
Specifically for off-road use.The raised profile helps discharge accumulated mud.
Part No. 8156065
REAR SUSPENSION KIT
To support heavier loads while maintaining a sports riding style.The kit includes a shock absorber with preload, compression and rebound adjustment: this allows the rider to adjust the riding positions and handling characteristics of the bike to suit the load carried and the type of terrain. Can be purchased separately without the fork spring kit.
Part No. 8795038
Part No. 8793056 (black low)Part No. 8793057 (brown low)Part No. 8793683 (black high)
-
13
18
14
13
10
09
12
0104
02
03
11
20
00
> 2
00
4E
TV 1
00
0 C
AP
ON
OR
DM
OD
EL
YEA
R
PROTECTIVE FRONT FAIRING
Protection against the unexpected.Designed to protect the front of the bike and the radiator in the case of falls or slides, this kit includes a 3-piece steel frame plus the bottom and side mounting brackets for the right and left fairing.
Part No. 8791237
FORK SPRING KIT
Maximum stability and control in all situations.Made from very rigid steel, these springs ensure improved handling and performance over rough ground and when the bike is fully loaded. In particular, they prevent ‘pitching’ i.e. the sudden transfer of weight from the rear of the bike to the front, and the consequent bottoming out of the forks, caused by sharp braking or sudden impact. Part No. 8795037
-
01
02
03
04
PE
GA
SO
65
0 I
.E.
+ P
EG
AS
O T
IBE
T
05
19
93
> 2
00
4M
OD
EL
YEA
R
-
01
01 02 03 04
PE
GA
SO
65
0 I
.E.
+ P
EG
AS
O T
IBE
T
0605
19
93
> 2
00
4M
OD
EL
YEA
R
X-BOX TOP BOX
Perfect for short trips and long distance touring.A capacity of 50 litres makes the X-Box ideal for transporting a large number of personal effects, all held neatly in place with the internal cross straps. Can also hold two full face helmets. Practical unilock system with just one key for fitting, removing, opening and closing. Made from impact, scratch and wear resistant polypropylene. Guaranteed water-proof thanks to the perfect seal between the strong embossed base and the lid with its original paint finish. Complete with rear reflector for improved passive visibility at night. Co-ordinated graphics and colours ensure a perfect match with X-Box side cases.
Part No. 8792286
SUPPORT FOR X-BOX TOP BOX
Essential support frame for the X-box.Made from steel tube with impact and wear resistant finish, mounts securely to structural points on the bike frame in full compliance with Aprilia safety standards.
Part No. 8790188
PAIR OF SIDE CASES
Equally ideal for long trips or city traffic.A capacity of 48 litres and compact dimensions are combined with optimum agility in traffic, while the internal thermoformed lining makes them ideal load luggers for long road trips. The double lock system affords secure opening and closing of the lid as well easy fitting and removal of the cases. Styling co-ordinated with the X-Box top box combines the practicality of the embossed base with the elegant paint finish of the lid.
Part No. 8792289
TANK BAG
A versatile and elegant travelling companion.Expands upwards to give a total capacity of 15 litres: can also be quickly detached from the bike for use as a back pack. Made from extra tough Cordura, with a non-scratch base to avoid damaging the tank paintwork and a transparent top pocket for road maps. The rain hood ensures complete weather protection: elegantly finished with the Aprilia logo and reflective red trim.
Part No. 8792008
CENTRE STAND
Ensures maximum stability in all situations.Especially recommended for use with top boxes and side cases, also extremely useful for city parking or during servicing. Homologated Aprilia OEM accessory. Impact and wear resistant finish.
Part No. 8790147 (Tibet and Cube versions)Part No. 8795034 (I.E. version)
BODYGUARD ARMOURED CABLE LOCK
Patented technology for total security.Produced by Aprilia in partnership with European leader Trelock, the BodyGuard ensures maximum security thanks to its surface hardened 25 mm diameter links. A plastic sheath covers the steel cable to protect the bike’s paintwork against knocks and scratches. Easy to use in all situations thanks to its 1 metre length. The frame mounted locking pin is Aprilia’s own patented security solution, but the BodyGuard can also be used in a standard configuration with steel locking knob. Customised with the Aprilia logo. Can be carried easily in side cases or a top box.
Part No. 8790140
-
20
00
> 2
00
4
01
02
RS
T 1
00
0 F
UTU
RA
M
OD
EL
YEA
R
PAIR OF SIDE CASES
Indispensable for week-end trips and touring holidays.A capacity of 60 litres plenty of space to transport personal luggage, held securely in place with the internal elastic straps, or 2 full-face helmets. The thermoformed internal protection makes these cases extremely functional for carrying loads. The unilock system means that just one key is all you need to quickly fit, remove, open or close the cases. The distinctive styling combines a tough embossed base with an elegantly finished lid, with co-ordinated graphics to match the bike.
Part No. 8790257
TANK BAG
A useful and versatile accessory.Attaches to the tank or can be used a normal back pack. Expands upwards to give a total capacity of 26 litres. Made from extra-tough nylon, with a non-scratch bottom to avoid spoiling the finish of your tank and a transparent top pocket for road maps. The rain hood ensures total water-proofing: elegantly finished with the Aprilia logo and reflective red trim.
Part No. 8792156
-
SL
10
00
FA
LCO
19
99
> 2
00
4
01
02
01 02 03
MO
DE
L YE
AR
PAIR OF SIDE CASES
Multiply your load carrying possibilities.A capacity of 40 litres, expandable width, thermoformed internal protection and compact dimensions makes these cases the ideal place to stow your holiday luggage, without compromising the agility of the bike. The thermoformed internal protection makes them a practical solution for any load. Secured to the support frame by convenient fixing straps. Functional, yet elegant with reflective red trim. Equipped with external rain hoods for all-weather protection.
Part No. 8792153
TANK BAG
The last word in versatility.Expands upwards to give a total capacity of 26 litres: detaches quickly and simply for use as a back pack. Made in hard-wearing nylon with a non-scratch base to avoid spoiling the finish of your tank and a transparent top pocket for road maps. The rain hood ensures total weather-proofing. Elegantly finished in black with the Aprilia logo.
Part No. 8792156
TAIL BAG
For short trips or long journeys.Made in tough wear resistant nylon, expands in width to give a total capacity of 38 litres. Equipped weatherproof rain hood. Can be detached from the bike and use as normal shoulder bag. Elegant design customised by reflective red piping and the Aprilia logo.
Part No. 8792152
-
RSV 1000 R FACTORY
RSV 1000 R
TUONO R FACTORY TUONO 1000 R
RSV 1000 1999-2003
ww
w.a
cces
sori
esap
rilia
.com
RACIN
G M
OTO
RCYC
LE A
CC
ESSO
RIE
S
-
MO
DE
L YE
AR
RS
V 1
00
0 R
FA
CTO
RY
+ R
SV
10
00
R2
00
4
-
MO
DE
L YE
AR
02
03 04 05
RS
V 1
00
0 R
FA
CTO
RY
+ R
SV
10
00
R2
00
4
01
06
01 APRILIA RACING TITANIUM EXHAUST*
Massima potenza e leggerezza in pista.This pair of slip on exhausts with titanium outer sleeve and stainless steel inner tube have been specifically designed to enhabceve the performance of the bike on the racetrack. In addition to providing a weight saving of 4 kg compared with the standard exhausts, they also help increase torque and power, particularly in the medium revs band, thanks also to the dedicated mapping.
Part No. 8795039
ERGAL REVERSE PATTERN GEARSHIFTER*
For optimised performance on the racetrack.Polished Ergal; CAD/CAM machined from a solid blank. Easy to fit and to adjust thanks to the uniball control linkage.
Part No. 8791232
ADJUSTABLE ALUMINIUM FOOTRESTS*
Competitive racing style.Polished aluminium, CAD/CAM machined from a solid blank. Easy to fit and to adjust thanks to the eccentric fixing system.
Part No. 8793686
TANK BAG
The ideal accessory for brief trips and long journeys.Expands upwards to give a total capacity of 26 litres: detaches quickly and easily from the tank for use as a back pack. Made from extra strong nylon with a non-scratch base to avoid spoiling the finish of your tank and a transparent top pocket for road maps. The rain hood ensures total weather-proofing. Stylish black finish with the Aprilia logo.
Part No. 8792156
REAR STAND
Indispensable aid for servicing.Derived from the service stand used for SBK and GP bikes, this accessory proves invaluable when servicing your bike in the paddock or in the garage. In particular, it makes changing the rear wheel quick and easy.
Part No. 8705021
Part No. 8796765
AKRAPOVIC APRILIA RACING 2004 EXHAUST*
From a partnership between Aprilia Racing and the Akrapovic R&D team comes the latest evolution of the 2 in 2 exhaust system for the RSV 1000 R 2004. In this new version of the Aprilia Akrapovic exhaust system, power delivery is more fluid and controllable, making for a significantly improved acceleration out of corners and extended performance in the overrev band. The use of lightweight titanium and carbon fibre combined with a carefully designed configuration improve the handling of the bike, making it more responsive and less tiring to ride. These outstanding results are also due to the completely revised performance mapping to suit the characteristics of the new RSV 1000 R 2004. Extensive testing on the bench and on the circuit has produced the ideal setup to ensure maximum performance with maximum reliability. A further innovation introduced with the RSV 1000 R 2004 is the possibility to activate the dedicated mapping, which is already installed on the bike’s ECU, using the diagnostic tool supplied to the Aprilia Service Network.
-
MO
DE
L YE
AR
01
02
20
04
02
RS
V 1
00
0 R
FORGED ALUMINIUM WHEELS
Maximum performance on the track and on the road.Designed by Aprilia in collaboration with OZ and forged from Anticorodal 6061aluminium. Thanks to use of lightweight material and advanced forging technology, these special wheels (front and rear) help reduce the power required to move and steer the bike: the result is significantly improved handling, both on the road and on the racetrack. The reduction in weight produces a corresponding reduction in inertia and the gyroscopic forces that determine the equilibrium and behaviour of the bike.
Part No. 8796196 (front)Part No. 8108934 (rear)
CARBON PARTS
Lightweight racing parts for road use.Made from carbon fibre with clear finish, these components afford on average a 45% reduction in weight compared with the corresponding standard parts. They have passed all TÜV safety and homologation tests and are therefore equally suitable for use on the road as on the racetrack. There are a total of 10 different parts available (Rh and Lh side panels, Lh and Rh side fairings, front mudguard, rear mudguard, Rh and Lh fairing extractors, Rh and Lh front fairing baffles.
EXTRACTORS, RIGHT AND LEFT Part No. 8796779
REAR MUDGUARD Part No. 8796783
HAND GUARDS Part No. 8796782
SIDE PANELS, RIGHT AND LEFT Part No. 8796784 and 8796785
SIDE FAIRINGS, RIGHT AND LEFT Part No. 8796780
FRONT MUDGUARD Part No. 8796055
-
MO
DE
L YE
AR
01
TUO
NO
10
00
R F
AC
TOR
Y2
00
4
RACING KIT
Everything you need to obtain ultimate performance.This kit has been specifically put together by Aprilia specialists for the Tuono 1000 R Factory and designed exclusively for use on the racetrack. More than just a collection of assorted components, this is a true and proper racing “system” that features the very best technology and materials available: to reduce the total weight of the machine, improve handling and make the most of the available power to give you the most exhilarating ride possible.
- RSV EVO Tuono exhaust system- carbon racing belly pan- carbon racing front fairing- silencer bracket- Z = 16 pinion- lightweight racing screw and component kit- mesh cover for rear light cluster hole- reverse pattern gear shifter- carbon fibre seat base and cover- removable pillion seat cover
Part No. 8796947
-
MO
DE
L YE
AR
20
02
> 2
00
4TU
ON
O 1
00
0 R
01
AIR INTAKE, RIGHT & LEFT Part No. 8791226 and 8791227FRONT MUDGUARD
Part No. 8791225
BELLY PAN Part No. 8791222
REAR SEAT SURROUND Part No. 8791229
RADIATOR COVER, RIGHT & LEFT Part No. 8791230 and 8791231
WATER RESERVOIR TANK COVER Part No. 8791221
FRONT FAIRING Part No. 8791224
HEEL PLATE, RIGHT & LEFT Part No. 8791213 and 8791214
DASH COVER Part No. 8791223
SIDE FAIRING, RIGHT & LEFT Part No. 8791215 and 8791216
REAR MUDGUARD Part No. 8791228
KEVLAR
CARBON AND KEVLAR PARTS
Low in weight, high in prestige. Made from carbon fi bre and Kevlar with a transparent opaque fi nish, these components further reduce the weight of the machine while conferring an authentic racing look. A choice of 9 different parts in carbon fi bre (front fairing, rear seat surround, water reservoir tank cover, belly pan, dash cover, front mudguard, rear mudguard, right and left air intakes), and 3 in carbon/Kevlar (right and left radiator covers, right and left heel plates, right and left side fairings).
-
MO
DE
L YE
AR
20
02
> 2
00
4TU
ON
O 1
00
0 R
06 07 08
02 03 04 05 RSV TITANIUM EVO EXHAUST*
Created exclusively for the racetrack.Born from the race experience gained by Aprilia in the European Superstock championship and the Battle of the Twins in the USA, this sports silencer has been designed to obtain the very best performance and race handling from the Tuono 1000 R. A totally authentic racing sound, increased torque and power, plus a significant reduction in the total weight and dimensions of the bike thanks to the use of titanium: an ultra light material with exceptional mechanical strength and corrosion resistance. These characteristics ensure an overall improvement in handling, more responsive steering and faster acceleration out of bends. The dedicated EPROM chip was developed exclusively for this system and fine tuned through extensive testing both on the bench and on the track.
SP TITANIUM TWIN EXHAUST*
Straight from World SBK Championship.Designed exclusively for use on the racetrack, the SP Titanium is derived from the exhaust systems fitted to the RSV Mille SP, the bike with which Aprilia made its debut in the World Superbike Championship. It is a racing silencer with aggressive styling, specifically designed to optimise the race performance of the Tuono 1000 R. The use of titanium makes for increased power and torque with a reduction in overall weight of the machine. This means a net improvement in handling with more responsive steering and more punch out of corners. The carbon fibre mounting bracket and heat shield add a further touch of refinement to this special component. The dedicated EPROM was developed exclusively for this system and fine tuned through extensive testing both on the bench and on the track.
REVERSE PATTERN GEARSHIFTER*
Indispensable on the racetrack.Polished Ergal, CAD/CAM machined from a solid blank. Easy to fit and to adjust thanks to the uniball control linkage.
Part No. 8796530
ADJUSTABLE ALUMINIUM FOOTRESTS*
Reserved for racing.Polished aluminium, CAD/CAM machined from a solid blank. Easy to fit and to adjust thanks to the eccentric fixing system.
Part No. 8796531
STAINLESS STEEL SCREWS KIT (66 SCREWS)
Authentic racing style.Machined from solid blanks; customise your Tuono 1000 R with an exclusive racing look.
Part No. 8791220
FORGED ALUMINIUM WHEELS
Maximum performance on the track and on the road.These special wheels (front and rear) in forged Anticorodal 6061aluminium were designed by Aprilia in partnership with OZ, the leading manufacturer of high performance wheels. The reduction in weight achieved through the use of lightweight materials and advanced production technology makes for a corresponding reduction in the power required to move and steer the bike: the result is significantly improved handling, both on the road and on the track.
Part No. 8796263 (SILVER front) Part No. 8796196 (BLUE front) Part No. 8796264 (SILVER rear)Part No. 8796197 (BLUE rear)
TANK BAG
Ideal for both weekend trips and long journeys.Expands upwards to give a total capacity of 26 litres. Detaches in seconds from the tank for use as a handy back pack. Made from extra-tough Cordura, with a non-scratch base to avoid spoiling the finish of your tank and a transparent top pocket for maps. Rain hood supplied for total weather-proofing. Elegant two-tone grey custom finished with the Aprilia logo.
Part No. 8792156
Part No. 8796537Part No. 8796536
-
MO
DE
L YE
AR
01
08 09
02
RS
V M
ILLE
R +
RS
V M
ILLE
19
99
> 2
00
3
CARBON PARTS
Lightweight performance GP-style.A total of 13 special parts made from carbon fibre with a transparent finish, affording on average a 45% reduction in weight compared with the corresponding standard parts. They have passed all TÜV safety and homologation tests and are therefore equally suitable for use on the road as on the racetrack.
ENGINE KIT - STAGE 1*
The ultimate expression of Aprilia racing spirit. Made by Aprilia Racing exclusively for the track, this kit includes engine parts and the Akrapovic Aprilia Racing exhaust system, together with a dedicated EPROM chip specially programmed to get maximum performance from the machine in terms of power and torque, for faster steering response and acceleration out of bends, as well significantly extended power in the overrev band.
Part No. 8796528
CARBON AIRBOX PLUS 57Ø MMTHROTTLE BODY*
For use in conjunction with a racing exhaust system to enhance performance. Developed exclusively for racing use, this is a complete programme to increase the volume and output of the air intake system on the RSV 1000 and RSV 1000 R Year 01/02/03, while reducing overall weight through the use of carbon fibre. The overbored throttle body provides a net increase in available power. When used in conjunction with the RSV Titanium Evo mono exhaust or the SBK Replica “Aprilia by Akrapovic” 2 in 2 system, it gives a further boost to acceleration. The kit comprises: carbon fibre airbox, 57 mm throttle body, dedicated EPROM chip plus cover, throttle cables, gasket set and instruction manual.
Part No. 8796738
AKRAPOVIC APRILIA RACING EXHAUST*
Ultimate performance on the track.Designed in partnership between Aprilia and Akrapovic exclusively for race use, this is a replica of the exhausts fitted to the RSV 1000 in the SBK Championship. Elegant, aggressive looks are combined with the top quality materials of titanium and carbon fibre giving a combination of strength, performance and low weight. Ensures superior handling, more responsive steering and faster acceleration out of corners, as well as a net improvement in performance in the overrev band. The dedicated EPROM was created exclusively for this exhaust system and optimised through extensive circuit and bench testing.
Part No. 8796502 (‘01-‘03)
-
MO
DE
L YE
AR
03 04 05 06
10
07
13 141211
RS
V M
ILLE
R +
RS
V M
ILLE
19
99
> 2
00
3
Part No. 8796738
STEERING DAMPER
Ideal for the racetrack and sports riding.Sachs twin chamber adjustable steering damper optimises bike steering on the racetrack and in all demanding riding conditions, such as twisting mountain roads. Quick and simple to fit to existing mounting points on the bike.
Part No. 8123972
RSV TITANIUM EVO EXHAUST*
Born out of Aprilia’s racing experience in Europe and the USA.A sports silencer specifically designed to optimise the racetrack performance and handling of the RSV Mille: increased torque and power, reduced weight and overall dimensions of the bike coupled with an authentic racing sound. The use of titanium, an ultra light material with exceptional mechanical strength and corrosion resistance, contributes to improved handling, more responsive steering and faster acceleration out of bends. The dedicated EPROM was developed and optimised through extensive testing both on the bench and on the track.
SP TITANIUM TWIN EXHAUST*
Direct from Aprilia Racing.Adapted from the system used on the RSV Mille SP, the bike with which Aprilia made its debut in the World Superbike Championship, this exhaust is exclusively for racing and is specifically designed to optimise performance of the RSV Mille on the circuit. The use of titanium reduces the overall weight of the bike. This makes for a net improvement in handling characteristics, with more responsive steering and faster acceleration out of corners. A carbon fibre mounting bracket and heat shield help reduce weight and add extra kudos to the aggressive styling. The dedicated EPROM was developed exclusively for this exhaust and fine tuned through extensive testing on the bench and on the track.
ERGAL REVERSE PATTERN GEARSHIFTER*
Indispensable for fast gearshifts on the racetrack.Polished Ergal, CAD/CAM machined from a solid blank. Easy to fit and to adjust thanks to the uniball control linkage.
Part No. 8796530
ADJUSTABLE ALUMINIUM FOOTRESTS *
In perfect racing style.Polished aluminium, CAD/CAM machined from a solid blank. Easy to fit and to adjust thanks to the eccentric fixing system.
Part No. 8796531
TITANIUM SCREWS KIT (16 SCREWS)
As used in the World Superbike Championship.Made by Poggipolini, the world specialist in Titanium motorcylcle parts, using the high strength alloy Ti-6Al-4V which allows weight to be removed without affecting strength and safety. Used to secure rider footrests, top and bottom fork yokes, clip on bars and front brake callipers. Reduce the overall weight of the bike without compromising the strength or safety of the fasteners.
Part No. 8796050
TANK BAG
Practicality and style for all occasions.Made from extra tough wear-resistant material. Expands upwards to give a total capacity of 26 litres and has a transparent top pocket for road maps and a document pocket. The rain hood ensures the bag stays waterproof in inclement weather. Easily detached from the tank, it can be used as comfortable back pack thanks to the two shoulder straps provided. Equally useful for brief trips and for longer journeys. Elegant in black and custom finished with the Aprilia logo.
Part No. 8792156
RSV BIKE COVER
The ‘official’ Aprilia protection.Made of Lycra™ and customised with RSV Mille graphics, this cover protects the motorcycle from dust, scratches and prying eyes, as used in racing paddocks.
Part No. 8796046
REAR STAND
Indispensable aid for servicing.Similar to those used in the SBK and GP championships, this wheeled “L” stand proves invaluable when servicing your bike in the paddock or in the garage. In particular, it makes changing the rear wheel quick and easy.
Part No. 8705021
FORGED ALUMINIUM WHEELS
Record performance on the track and on the road.Designed by Aprilia in partnership with OZ and forged from Anticorodal 6061aluminium. Thanks to use of lightweight material and advanced forging technology, these special wheels (front and rear) afford a reduction in the power required to move and steer the bike: the result is significantly improved handling, both on the road and on the track. The reduction in weight produces a corresponding reduction in inertia and the gyroscopic forces that determine the equilibrium and behaviour of the bike.
Part No. 8796263 (SILVER front) Part No. 8796264 (SILVER rear)Part No. 8796196 (BLUE front) Part No. 8796197 (BLUE rear)
Part No. 8796496 (’99-’00) Part No. 8796497 (’01-’03)
Part No. 8796490 (’99-’00) Part No. 8796491 (’01-’03)
-
MO
DE
L YE
AR
EXH
AU
ST
SYS
TEM
S
0201
01
20
04
AKRAPOVIC APRILIA RACING 2004 EXHAUST*
From a partnership between Aprilia Racing and the Akrapovic R&D team comes the latest evolution of the 2 in 2 exhaust system for the RSV 1000 R 2004.
In this new version of the Aprilia Akrapovic exhaust system, power delivery is more fluid and controllable, making for a significant improvement in acceleration out of bends and extended performance in the overrev band. The use of lightweight titanium and carbon fibre combined with a carefully designed configuration improve the handling of the bike, making it more responsive and less tiring to ride. These outstanding results are also due to the completely revised performance mapping to suit the characteristics of the new RSV 1000 R 2004. Extensive testing on the bench and on the circuit has produced the ideal setup to ensure maximum performance with maximum reliability. A further innovation introduced with the RSV 1000 R 2004 is the possibility to activate the dedicated mapping, which is already installed on the bike’s ECU, using the diagnostic tool supplied to the Aprilia Service Network.
TITANIUM APRILIA RACING*
The slip on exhaust kit born out of Aprilia racing experience and created exclusively for use on the racetrack.
Made with a titanium outer shell and steel inner tubing, this exhaust provides a global improvement in performance: the system comes into its own at 6000 rpm, from which point there is a consistent increase in power and torque. These results are achieved thanks to the dedicated performance mapping, which has been specifically designed to suit the new engine characteristics and refined through extensive testing both on the bench and on the track. In the case of the 2004 model, the dedicated mapping is already installed on the bike’s ECU and can be activated using the diagnostic tool supplied to the Aprilia Service Network. Surprisingly quick and simple installation is a yet another advantage of this excellent kit.
TECHNICAL CHARACTERISTICS
Materials: Silencers with titanium outer shell Steel inner tubing
Dimensional data: Weight reduction - 25%
Mapping: New dedicated mapping which can be activated using the diagnostic tool supplied to Aprilia Service Network
Application: RSV 1000 Model Year 2004
Part No. 8796765 Part No. 8795039
Photographs, technical data, specifications and colours shown in this brochure refer to the Italian market version and may be subject to change without prior notice.
TECHNICAL CHARACTERISTICS
Materials: Titanium silencers Steel manifold Carbon fibre hangers
Dimensional data: Weight reduction - 45%
Mapping: New dedicated mapping which can be activated using the diagnostic tool supplied to the Aprilia Service Network
Application: RSV 1000 Model Year 2004
-
MO
DE
L YE
AR
03 04 05
20
01
> 2
00
3E
XHA
US
T S
YSTE
MS
RSV TITANIUM EVO EXHAUST*
Born from the race experience gained by Aprilia in the European Superstock championship and the Battle of the Twins in the USA.
Developed to meet the demands of international competition, this sports silencer is specifically designed to optimise the performance and racetrack handling of the RSV 1000. An authentic racing sound is accompanied by an increase in power and torque and a significant reduction in the weight and overall dimensions of the bike, thanks to the use of titanium: an ultra light material with exceptional mechanical strength and corrosion resistance. These characteristics ensure a global improvement in handling, more responsive steering and faster acceleration out of corners. The dedicated EPROM was developed and refined through extensive testing both on the bench and on the track.
SP TITANIUM TWIN EXHAUST*
Designed to bring the performance and feeling of the World Superbike Championship to the RSV Mille.
This series of exhausts has been directly adapted from the system used on the RSV SP, the special version of the RSV 1000 prepared for the SBK Championship. Twin racing exhaust with dynamic looks, designed to optimise performance of the RSV 1000 on the racetrack. The use of titanium makes for a reduction in overall weight of the machine with improved handling round bends and steering agility. The carbon fibre mounting bracket and heat shield reduce weight even further while adding a touch of prestige. The dedicated EPROM was developed exclusively and fine tuned through testing both on the bench and on the track.
AKRAPOVIC APRILIA RACING EXHAUST*
Replica exhaust inspired by Aprilia’s experience in the World Superbike Championship.
Developed in partnership between Aprilia and Akrapovi_, this elegant, aggressively styled exhaust system is derived directly from the Superbike version and has been specifically designed to optimise performance of the RSV Mille on the racetrack. Its exceptional blend of strength, low weight and high performance is due to the use of titanium and carbon fibre, combined with a carefully studied design. The result is a net improvement in handling and a faster response for steering and accelerating out of bends. Extensive bench and track testing have fine tuned the mapping to ensure high performance with maximum reliability.
TECHNICAL CHARACTERISTICS
Materials: Titanium silencers Steel manifolds Carbon fibre hangers
Dimensional data: Weight reduction - 45%
Mapping: Dedicated EPROM fully bench and circuit tested
Application: RSV 1000 Model Year 2001-2003
TECHNICAL CHARACTERISTICS
Materials: Silencer with titanium outer shell Steel inner
Dimensional data: Weight reduction - 48%
Mapping: Dedicated EPROM, bench and track tested
Application: RSV 1000 Model Year 1999 - 2000; 2001 - 2003 and Tuono 1000
TECHNICAL CHARACTERISTICS
Materials: Silencer with titanium outer shell Steel inner Carbon fibre hangers
Dimensional data: Weight reduction - 35%
Mapping: Dedicated EPROM, bench and track tested
Application: RSV 1000 Model Year 1999 - 2000; 2001 - 2003 and Tuono 1000
Part No. 8796502 Part No. 8796490 (RSV ’99-’00)
Part No. 8796491 (RSV ’01-’03)Part No. 8796536 (TUONO ’01-’03)
Part No. 8796496 (RSV ’99-’00)Part No. 8796497 (RSV ’01-’03)Part No. 8796537 (TUONO ’01-’03)
* Destined exclusively for circuit racing motorcycles that are not used on public roads. Not suitable for any other purpose. Not to be fitted to motorcycles ridden on public roads. Installation of these parts may render your motorcycle legally unsuitable for use on public roads and render you liable to prosecution if you do so
aprilia raccomends