ACCESSORIES CUTTERS FOR ROBOTIC SYSTEMS
Transcript of ACCESSORIES CUTTERS FOR ROBOTIC SYSTEMS
ACCESSORIESAdapter: Allows both straight and tapered Flush-Type dressers to be used with drillpresses, portable or right-angle drills.Threaded 3/8" - 24.
Stud ShankFor use with any extended series chuckor adaptor.
Guide RingsGuide Rings are used to guide on theoutside diameter of the electrode tobe dressed. Guide Rings are used withC-01 Chucks, N-01 Nuts, and BE TypeBlades. R-01 Rings are to be used with5RW (.625) and 16mm diameterelectrodes. R-02 Rings are for .482diameter electrodes. R-02A Rings arefor .500 and 13mm electrodes.Extended Guide Rings are used whendressing long pointed type electrodes orwhen you need to make sure the top ofthe electrode is perpendicular to theside of the electrode. Use R-07Extended Guide Rings with 5RW (.625)and 16mm diameter electrodes. R-08Extended Guide Rings for .482 diameter electrodes. Use R-08-x13Extended Guide Rings for .500 and13mm electrodes.
Special BladesIn addition to the partial listing of ourstandard blade shapes shown we regularly manufacture blades for nonstandard electrode shapes, we are hereto help solve your dressing problems.
Pneumatic Tools and Other ProductsPlease contact us for more detailedinformation.
Dressing with a pneumatic tool.
Drill press with Extended Series.
Lathe with Large Extended Series.
Stud Shank - SS-01
Tips can be preciselydressed in seconds, eitheronline or offline, usingeither our flush, extended,large extended or flushstyle cutters.
4506 Roger Chaffee Drive, S.E.Grand Rapids, Michigan 49548-7522USA
616-538-6224FAX 616-538-6777Form No. 0101
Authorized Distributor:
www.electrodedressers.comE-MAIL - [email protected]
Adapter AD -01
Producing a line of
cutting tools that have
been proven for over 50
years, Electrode Dressers
supplies blades that result
in increased productivity
through decreased
downtime, plus tremendous
cost savings through
reduced energy
consumption. A major
supplier to the automotive
companies and their
suppliers, appliance
manufacturers, office
furniture manufacturers,
the aeronautical industry,
and other industries
utilizing spot welding.
Electrode Dressers offers
a huge assortment of
cutter blades in many
distinct styles including
cutters for Robotic Systems.
Offset ElectrodesUntil Electrode Dressers developedthis unique system, offset electrodeswere almost impossible to dress –resulting in a high and constantreplacement cost. Now offset electrodes can be dressed quickly, easily, efficiently... offering substantial savings in offset electrode replacement costs.
Electrode Dressers has applied over 50 years of experiencetoward the design and development of a full line of cutters forrobotic spotwelding systems. As a supplier to the automotiveindustry, appliance manufacturers, office furniture manufacturers,the aeronautical industry, and other industries utilizing spot welding. Our attention to quality and dedication to service makesthe cutters from Electrode Dressers the best in the industry.
REQUIRED PARTS:Guide Sleeve
Collar
OS-01OS-02
Chuck
C02-EC02-E
Nut
N-04N-04
Blade No.
BO-01 (4RW)BO-02 (5RW)
R-07
DRESS WORN ELECTRODE TIPS QUICKLY, EASILY, ANDECONOMICALLY...ASSURING
UNIFORM WELDS AND EXTENDED LIFE
VISIT US AT OUR WEBSITE:www.electrodedressers.com
CUTTERS FOR ROBOTIC SYSTEMS
Stud Shank
SS-01SS-01
R-08
BF-06 BF-08
25°
.25
.12 RAD.
.25
70°
BLADE SELECTION CHART
.31 RAD.
BE-02 BE-11
.25
.22 RAD.
40°
.15 RAD.
BT-01
.18
.15 RAD.
BT-02
.12
BT-03
.25
60°
.25 RAD.
BF-01
BT-07
.25
.25 RAD
BT-08
.19
.25 RAD
BT-09
.12
.25RAD
BE-5989
BE-26
45°
.25
BE-40
.12
BE-12
Flat
BE-14
2" RAD.
BE-21
60°
.25
BEL-15
2" RAD.
BEL-17
.37" RAD.
BEL-36
.28
BEL-38
25°
.18 RAD.
45°
.25
BEL-23
.44 RAD.
BEL-27
2" RAD..12
.25 RAD.
.15
.12RAD.
15°
BE-01 BE-30 BE-44 BE-57
.19
.175 RAD.
.15 RAD.
30°
BF-09
.
.19
60°
BF-11 BF-13 BF-23
2" RAD.Flat
.19
EXTENDED TYPEFor 4RW/13mm ElectrodesUse Chuck C-01, Nut N-01 & Ring R-02A
FLUSH-TYPE TAPEREDFor 4RW/13mm ElectrodesUse Chuck C-03 for all
FLUSH-TYPE STRAIGHTFor 4RW/13mm ElectrodesUse Chuck C-06A for all
For 5RW/16mm ElectrodesUse Chuck C-01, Nut N-01 & Ring R-01
For 5RW/16mm ElectrodesUse Chuck C-04 for all
For 6RW/19mm ElectrodesUse Chuck C-02 & Nut N-02
For 7RW ElectrodesUse Chuck C-02 & Nut N-03
.31 RAD.
BF-02 BF-04
.125
°
BF-12 BF-14
.25
60°
2" RAD.
BF-16
3" RAD.
BF-18
4" RAD.
.22 RAD.
BF-20
40°
.25
2 D.
BF-21
.19
BF-22 BF-24
47°
.28 RAD.
.19Flat
BF- 26
45°
.25
For 5RW/16mm ElectrodesUse Chuck C-05 for all
BEL-7722
LARGE EXTENDEDEXTENDED TYPE FLUSH TYPE TAPEREDFLUSH TYPE
BNose
ANose
ANose
ANose
BNose
ANose
CNose
FNose
ENose
ENose
BNose
FNose
BNose
ANose
ENose
BNose
FNose
ANose
ANose
ANose
ANose
ANose
ANose
BNose
ENose
ENose
FNose
CNose
ENose
BNose
BNose
ANose
ENose
ENose
FNose
FNose
FNose
ANose
BNose
ENose
CNose
ENose
BE-11S
.25
18°A
Nose
BE-48
.25
BNose
BF-27
.15
BF- 25
45°
.19
BF- 44
.19
BF- 20S
.25
18°ANose
ANose
ENose
ANose
BF- 48
.25
BNose
BEL Blade N-02C-02
Large Extended Assembly
BE Blade R-01
N-01C-01
Extended Assembly
C-03 BT Blade
Flush Tapered AssemblyFlush Assembly
C-05 BF Blade
BF- 4SP
.21
BNose