Accessories cAtAlog - Sterilizer Tech · 2015. 5. 12. · for cleaning of tubular instruments....
Transcript of Accessories cAtAlog - Sterilizer Tech · 2015. 5. 12. · for cleaning of tubular instruments....
Safety without compromise
Accessories cAtAlog
| 3
Trays And
B
asketsM
anual C
leaningW
asher- D
isinfectors
Sterilizers
Miscellaneo
usP
rep A
nd P
ack tab
le Accesso
ries
trAYs And BAsKets
mAnuAl cleAning
WAsher-disinfectors
sterilizers
PreP And PAcK tABle Accessories
miscellAneous
getinge simPlifies Your joB
Getinge offers the world’s most comprehensive
range of medical equipment for disinfection and
sterilization, designed for safe, reliable, cost-
effective performance. But that is only part of
the story.
Each washer-disinfector and sterilizer we
deliver can be complemented with a wide range of
accessories to match your specific processing
and handling needs, and to make your job easier.
If you don’t find the accessories you’re looking
for in this catalog, be sure to contact your Getinge
representative.
our range is constantly growing!
Trays And
B
askets
trAYs And BAsKets | 5
Our comprehensive range of hygienically
designed trays and baskets forms an
essential part of Getinge’s complete disinfection
and sterilization systems. Easy to handle,
easy to clean, and perfectly adapted to the
demands of modern hospitals. Like most
of our accessories, they are designed for
flexibility. This means that our trays and
baskets fit many different sterilizers, washer-
disinfectors, trolleys etc.
trAYs And BAsKets
These instrument trays are suitable for instrument sets and smaller parts. The hold-down and hinged lids can be locked onto the trays to assure that instruments and smaller parts remain inside the instrument tray. The hinged lid can also be placed upside-down and can then create layers inside the instrument tray. Mesh size: 6.5 mm.
CAT No. Description Dimensions (L x W x H), in (mm)
466309301 SPRI-1 tray basket 17.72 x 13.39 x 2.76 (450 x 340 x 70)
498816902 SPRI-1 tray hold-down lid 17.72 x 13.39 (450 x 340)
477345200 SPRI-1 tray hinged lid 17.72 x 13.39 (450 x 340)
466309201 SPRI-2 tray basket 13.39 x 9.84 x 2.76 (340 x 250 x 70)
498816901 SPRI-2 tray hold-down lid 13.39 x 9.84 (340 x 250)
477345300 SPRI-2 tray hinged lid 13.39 x 9.84 (340 x 250)
466309101 SPRI-3 tray basket 9.84 x 6.69 x 2.76 (250 x 170 x 70)
498816900 SPRI-3 tray hold-down lid 9.84 x 6.69 (250 x 170)
498637400 SPRI-3 tray hinged lid 9.84 x 6.69 (250 x 170)
sPri trAYs And coVers
SPRI-1
SPRI-2
SPRI-3
Modular instrument tray for use through all phases of instrument processing. Manufactured as a deep-molded immersion tray, giving exact dimensions and stability against careless handling. Made of stainless steel wire net and equipped with two inner-mounted drop handles.
CAT No. Description Dimensions (L x W x H), in (mm)
561620601 Full-size instrument tray 18.9 x 9.84 x 1.97 (480 x 250 x 50)
561620501 Half-size instrument tray 9.45 x 9.84 x 1.97 (240 x 250 x 50)
din instrument trAY
Modular instrument tray with perforated bottom and solid sides to prevent small instruments from sticking out. Includes carrying handles.
CAT No. Description Dimensions (L x W x H), in (mm)
9500006 American instrument tray 10.5 x 20 x 3.5(266.7 x 508 x 88.9)
This fine-mesh inner tray is used for smaller instruments or parts of instruments. The tray assures that these small instruments will not disappear during the washing phase.Mesh size: 1.5 mm.
CAT No. Description Dimensions (L x W x H), in (mm)
932894 Fine-mesh inner tray (medium) 8 x 12 x 1.5 (203.2 x 304.8 x 38.1)
476944000 Snap-on lid (for medium tray) 8 x 12 (203.2 x 304.8)
932895 Fine-mesh inner tray (small) 5.75 x 8 x 1.5(146.05 x 203.2 x 38.1)
932896 Snap-on lid (for small tray) 5.75 x 8 (146.05 x 203.2)
705300 Fine-mesh inner tray (large) 16 x 12 x 1.5 (406.4 x 304.8 x 38.1)
705320 Snap-on lid (for large tray) 16 x 12 (406.4 x 304.8)
fine-mesh inner trAY
AmericAn instrument trAY
Trays And
B
askets
trAYs And BAsKets | 76 | trAYs And BAsKets
Stainless frame with inner plastic mesh will protect delicate instruments. Screen without handles fits in the bottom of a SPRI-2 tray. Screen with handles allows instruments to be placed between lower and upper screens in the bottom of a SPRI-2 tray.
CAT No. Description Dimensions (L x W), in (mm)
498849901 Instrument screen without handles 12.75 x 9.25 (324 x 235)
498849900 Instrument screen with handles 12.75 x 9.25 (324 x 235)
instrument screen
This fine-mesh basket with lid is ideal for holding small, sharp instruments during wash/disinfection process. The basket is made of stainless steel. Mesh size: 1.5 mm.
CAT No. Description Dimensions (L x W x H), in (mm)
499363700 Fine-mesh box with lid 3.94 x 3.94 x 2.36 (100 x 100 x 60)
499363701 Fine-mesh box with lid 2.36 x 2.36 x 1.77 (60 x 60 x 45)
499363702 Fine-mesh box with lid 4.72 x 2.36 x 1.77 (120 x 60 x 45)
499363703 Fine-mesh box with lid 15.91 x 2.36 x 1.77 (150 x 60 x 45)
fine-mesh BAsKet
This wire-mesh basket with high sides is ideal for holding large instruments, medicine cups or glassware. The basket includes carrying handles.
CAT No. Description Dimensions (L x W x H), in (mm)
498854300 High, wire-mesh basket 16.5 x 7 x 4 (419.1 x 177.8 x 101.6)
499187900 High, wire-mesh basket 19.25 x 7 x 4 (488.95 x 177.8 x 101.6)
high, Wire-mesh BAsKet
For safe storing of either general, or bayonet-shaped or long shank instruments in instrument trays. Suitable for all instrument trays of STU standards according to DIN 58952-2, as well as for the SPRI trays. Can be firmly fixed in the instrument trays, if required. Infinitely adjustable to the instruments to be stored. Use within the complete instrument cycle, i.e. cleaning, sterilization, instrumentation, without any additional handling.
Ref. CAT No. For tray length min 240 mm Dimensions (L x W x H), in (mm)
1 561958001 For general instruments/one fixation 9.1 x 8.94 x 1.97 (231 x 227 x 50)
2 561958101 For bayonet-shaped instruments/one fixation 9.1 x 8.94 x 1.97 (231 x 227 x 50)
3 561958501 For general instruments, adjustable fixation 60-214 mm 2.36-8.43 (60-214) 8.43 x 9.45 x 1.97 (214 x 240 x 50)
Ref. CAT No. For tray length min 480 mm Dimensions (L x W x H), in (mm)
4 561958201 For general instruments/one fixation/480 mm long tray 15.98 x 9.1 x 2.05 (406 x 231 x 52)
5 561958301 For general instruments/two fixations/480 mm long tray 15.98 x 9.1 x 2.05 (406 x 231 x 52)
6 561958401 For bayonet-shaped instruments/two fixations/480 mm long tray 15.98 x 9.1 x 2.05 (406 x 231 x 52)
instrument fiXAtion sYstem
With flat wire base and perforated sidewalls, for use through all phases of instrument processing. The perforated sidewall protects smaller instruments and packing material against damage. Made of stainless steel material, and equipped with two inner-mounted drop handles.
CAT No. Description Dimensions (L x W x H), in (mm)
561957001 Half-size, perforated instrument tray 9.45 x 9.84 x 2.36 (240 x 250 x 60)
561957101 Full-size, perforated instrument tray 18.9 x 9.84 x 2.36 (480 x 250 x 60)
PerforAted din instrument trAY
Suitable for cleaning, sterilization, storage and transport of endoscopic instruments. No open wire ends or sharp protrusions. Removable lid with special closing device. The silicone holders keep the instruments securely in place. The basket is made of stainless steel.
CAT No. Description Dimensions (L x W x H), in (mm)
561620701 For one endoscope 11.42 x 3.15 x 2.05 (290 x 80 x 52)
561620702 For two endoscopes 11.42 x 3.15 x 2.05 (290 x 80 x 52)
561620801 For one endoscope 18.11 x 3.15 x 2.05 (460 x 80 x 52)
561620802 For two endoscopes 18.11 x 3.15 x 2.05 (460 x 80 x 52)
561620901 For one endoscope 26.38 x 3.15 x 2.05 (670 x 80 x 52)
endoscoPe BAsKet
4
1 2
5 6
3
Manual
Cleaning
mAnuAl cleAning | 9
7510 steAm gun
CAT No. Description
6013091171 7510 steam gun
The task of cleaning puts special demands
on the selection of cleaning equipment.
Getinge supplies a range of accessories for
manual cleaning of instruments.
mAnuAl cleAning
The powerful, multi-purpose Selecta spray gun rinser is an extremely useful instrument rinser wherever effective rinsing is a must. For use with water or compressed air. All tips are easily locked to the spray gun by a safety cone. The gun grip is heat insulated. The water/air pressure is released, regulated and fully controlled by the spray-gun trigger. Delivered with a set of eight nozzles and a wall-mounted rack for storage of nozzles within easy reach.
sPrAY gun rinser
CAT No. Description
470259001 Spray gun rinser with 8 nozzles; rack included
470259003 Gun with hose
The 7510 steam gun can be used to clean carts and other portable equipment, racks and other large metal items. The powerful, multi-purpose steam gun uses house supplied steam, hot water and requires no electricity. Provides choice of steam only, steam/detergent, hot water/detergent, or hot water only.
Washer-
Disinfecto
rs
10 | cleAning AreA
WAsher-disinfectors | 11
Our washer-disinfector accessories feature
unmatched reliability and ergonomic design.
Each accessory is designed to provide flexibility
and versatility whether processing general
instruments, microsurgery instruments,
orthopedic sets, anesthesia materials,
minimal invasive instruments or utensils. All of
our accessories are constructed of stainless
steel for long life under severe conditions.
WAsher-disinfectors
This wash cart has three shelves for loading (two removable shelves and spray arms). The manifold is prepared for up to six hose nipple connections to allow for cleaning of tubular instruments. Spray arms can be removed and cart can be configured with various MIS accessories to wash a larger load of tubular instruments.
capacity: 6 DIN 18.9 x 9.84 x 1.97 in (480 x 250 x 50 mm)
3-leVel WAsh cArt
CAT No. Description Max. Load Height, in (mm)
503267000 3-level wash cart – Getinge 46-4 5.5 (140 )
This wash cart has three shelves for loading (two removable shelves and spray arm connections) but a slightly larger width than the standard wash carts to accommodate typical US trays. Six hose nipples come standard with the cart to allow for cleaning of tubular instruments, but this cart is not capable of interfacing with the modular MIS accessories.
capacity: 6 US trays 20 x 10.5 x 3.5 in (508 x 267 x 89 mm)6 DIN 18.9 x 9.84 x 1.97 in (480 x 250 x 50 mm)
3-leVel us WAsh cArt
CAT No. Description Max. Load Height, in (mm)
503288000 3-level US wash cart – Getinge 46-4 5.5 (140 )
instrument WAsh cArts for 46-seriesAll Getinge wash carts are designed to deliver pressurized cleaning and rinsing solutions to rotary spray arms below
each wash cart shelf. A top and bottom rotary spray arm inside the chamber provides complete coverage. Each wash
cart is mounted on wheels for easy movement in and out of the chamber, and for overall loading, unloading and transfer
of equipment. Spray arms feature removable end caps to allow for easy cleaning.
Getinge basic wash carts are available as upper and lower versions and operate independent of each other for easy loading and unloading. The lower basic cart fits all 46-series models and is mainly used for larger loads like stands for bowls and OR-shoes.
loWer BAsic cArt
CAT No. Description Dimensions (L x W), in (mm)
503305400 Lower basic cart – 46-series 23.31 x 20.28 (592 x 515)(max. shelf space)
The upper basic cart is meant for shorter items such as small bowls or instrument trays. Its independent movement from the lower cart and ability to extend from the washer-disinfector make it easy to load. Requires guide rails and an additional spray arm.
uPPer BAsic cArt
CAT No. Description Dimensions (L x W), in (mm)
499183100 Upper basic cart – single-door 46-series
23.31 x 20.28 (592 x 515)(max. shelf space)
499399300 Upper basic cart – pass-through 46-series
23.31 x 20.28 (592 x 515)(max. shelf space)
single-door
Pass-through
Washer-
Disinfecto
rs
12 | WAsher-disinfectors WAsher-disinfectors | 13
instrument WAsh cArts for 86-series 88 turBo And cm320
The manifolds on the non-US instrument wash carts are prepared for six hose nipple connections. These connections are used to clean and disinfect a lower number of tubular instruments on a regular wash cart without the need of a MIS-module. Always use the silicone cap when no instrument is connected to the hose nipple.
mAnifold connections
CAT No. Description
503393200 Manifold connections – silicone cap
503300000 Manifold connections - hose nipple
This wash cart has four shelves for loading (three removable shelves and spray arms). Spray arms can be removed and cart can be configured with various MIS accessories to wash tubular instruments.capacity:8 US trays on 8666 cart 2 US trays on 8668/88 Turbo cart 20 x 10.5 x 3.5 in (508 x 267 x 89 mm)
8 DIN trays on 8666 cart
12 DIN trays on 8668/88 Turbo cart
18.9 x 9.84 x 1.97 in (480 x 250 x 50 mm)
4-leVel WAsh cArt
CAT No. Description
498676209 4-level wash cart – Getinge 8666
502610401 4-level wash cart – Getinge 8668/88 Turbo
This wash cart has three shelves for loading (two removable shelves and spray arms). Spray arms can be removed and cart can be configured with various MIS accessories to wash tubular instruments. capacity: 6 US trays on 8666 cart 9 US trays on 8668/88 Turbo cart 20 x 10.5 x 3.5 in (508 x 267 x 89 mm)
6 DIN trays on 8666 cart
9 DIN trays on 8668/88 Turbo cart 18.9 x 9.84 x 1.97 in (480 x 250 x 50 mm)
3-leVel WAsh cArt
CAT No. Description
498781904 3-level wash cart – Getinge 8666
502610301 3-level wash cart – Getinge 8668/88 Turbo
13 | WAsher-disinfectors
This wash cart has five shelves for loading (four removable shelves and spray arms). Spray arms can be removed and cart can be configured with various MIS accessories to wash tubular instruments.
capacity:10 DIN trays on 8666 cart 15 DIN trays on 8668/88 Turbo cart 18.9 x 9.84 x 1.97 in (480 x 250 x 50 mm)
5-leVel WAsh cArt
CAT No. Description
499215705 5-level wash cart – Getinge 8666
502610501 5-level wash cart – Getinge 8668/88 Turbo
This wash cart has four shelves for loading (three removable shelves and spray arms). The manifold is prepared for up to six hose nipple connections to allow for cleaning of tubular instruments. Spray arms can be removed and cart can be configured with various MIS accessories to wash a larger load of tubular instruments.
capacity: 8 DIN 18.9 x 9.84 x 1.97 in (480 x 250 x 50 mm)
4-leVel WAsh cArt
CAT No. Description Max. Load Height, in (mm)
503224000 4-level wash cart – Getinge 46-4 3.5 (89)
Each manifold wash cart is provided with two manifold covers for removed spray arms.
WAsh cArt mAnifold Plug
CAT No. Description
498677400 Wash cart manifold plug – Getinge 8666
500433200 Wash cart manifold plug – Getinge 8668/88 Turbo
capacity:Holds DIN containers 23.6 x 11.8 x 5.9 in (600 x 300 x 150 mm) with lids.
contAiner cArt for 1/2 stu contAiners
CAT No. Description
499274000 For Getinge 46-4 washer-disinfector – holds 3 DIN containers
499111102 For Getinge 8666 washer-disinfector – holds 4 DIN containers
502613101 For Getinge 8668/88 Turbo washer-disinfector – holds 6 DIN containers
sPeciAlized WAsh cArtsGetinge offers specialized wash carts designed to deliver pressurized cleaning and rinsing to large sterilization
containers and anesthesia patient connections. Each wash cart is mounted on wheels for easy movement in and out
of the chamber, and for overall loading, unloading and transfer of equipment.
46-series 8666 8668/88 turbo
Washer-
Disinfecto
rs
WAsher-disinfectors | 1514 | WAsher-disinfectors
AnesthesiA mAnifold WAsh cArt
CAT No. Description Load Capacity
499778202 For Getinge 8666 washer-disinfector Up to 24 breathing tubes and 10 breathing bags or bellows
502611301 For Getinge 8668/88 Turbo washer-disinfector Up to 24 breathing tubes and 10 breathing bags or bellows
499700700 For Getinge 46-4 washer-disinfectors Up to 12 breathing tubes and 8 breathing bags or bellows
46-series 8666, 8668/88 turbo
mis AccessoriesWhen using cannula racks or the minimally invasive instrument wash car, cleaning and rinsing solutions circulate through
individual injectors to thoroughly clean inside lumens. Mounted rotary spray arms provide external cleaning. Dedicated
manifold carts such as the MIS cart and the anesthesia cart have two additional inlet ports to take in forced hot air from
the drying system, to dry inside lumens and airways.
cAnnulA instrument WAshing rAcKs And cArt
This cannula rack has 1 ramp and includes the following: • U-bar manifold rack assembly• 1 hold-down ramp assembly, with – 10 high silicone jets – 10 large plastic funnels for cannulas • 1 stand with 4 silicone jets for suction tips• 4 needle injectors • 6 silicone hoses for luer lock connectors• 1 removable cap to add 1 injector bar • 12 threaded sealing plugs• Center low tray for instruments
cAnnulA instrument rAcK With 1-rAmP
CAT No. Description
499395600 For Getinge 8666 washer-disinfector
499395602 For Getinge 8668/88 Turbo washer-disinfector
This cannula rack has 2 ramps and includes the following: • U-bar manifold rack assembly• 2 hold-down ramp assemblies, with – 10 high silicone jets – 10 large plastic funnels for cannulas • 2 stands, each with 4 silicone jets for suction tips• 8 needle injectors • 6 silicone hoses for luer lock connectors• 1 removable cap to add 1 injector bar • 12 threaded sealing plugs• Center low tray for instruments
cAnnulA instrument rAcK With 2-rAmPs
CAT No. Description
499395601 For Getinge 8666 washer-disinfector
499395603 For Getinge 8668/88 Turbo washer-disinfector
This wash cart for MIS instruments includes the following: • Cart assembly for manual/auto operation• 20 holding tubes for laparoscopic instruments • 20 covers to pressurize laparoscopic holding tubes• 10 medium holding tubes, .59 in ID (15 mm) • 8 large holding tubes, .78 in ID (20 mm)• 8 needle injectors • 46 high silicone jets for hoses or suction tips• 20 silicone hoses for luer lock connectors (6 with 6 mm male silicone nipple, 8 with s/s luer lock)
WAsh cArt for mis instruments
CAT No. Description
499854002 For Getinge 8666 washer-disinfector
502610901 For Getinge 8668/88 Turbo washer-disinfector
Designed to assure efficient cleaning and disinfection. The inclined positioning of the goods ensures maximum run-off and short drying times. capacity: 4 DIN containers 23.6 x 11.8 x 7.9 in (600 x 300 x 200 mm) with lids Maximum thickness of lids: 2.9 in (74 mm)
contAiner cArt for stu contAiners
CAT No. Description
502613401 Automatic - for Getinge 8668 / 88 Turbo and CM320 washer-disinfectors
For cleaning and drying of lumen instruments; sixty available ports.
mis instrument rAmP for oP cArt
CAT No. Description
500135200 For Getinge 8666 washer-disinfector
500135201 For Getinge 8668/88 Turbo washer-disinfector
Washer-
Disinfecto
rs
WAsher-disinfectors | 1716 | WAsher-disinfectors
For eight laparoscopic devices.
Add-on injector BAr
CAT No. Description
499304200 Add-on injector bar (8 laparoscopic devices)
cAnnulA instrument WAshing rAcKs And cArt Accessories
For eight small catheter hoses .19 in (4.83 mm).
Add-on injector BAr
CAT No. Description
499208400 Add-on injector bar (8 small catheter hoses)
Comes standard with ten silicone hoses fitted with one large plastic funnel each.
rAmPs
CAT No. Description
499377000 Front ramp
499366900 Rear ramp
1 2 3
4
5
6 9
11
8
7 10
Ref. CAT No. Description
1 500723901 20 mm holding tube (center bar) 0.78" ID
2 500723900 15 mm holding tube (center bar) 0.59" ID
3 500723800 Holding tube (ramp)
4 500830675 Holding tube cover
5 499892600 Needle injector 4" (101.6 mm)
6 499589500 Threaded sealing plug
Ref. CAT No. Description
7 498836500 Silicone jet for cannulas .13" to .31" diameter (3.30 mm to 7.87 mm)
8 499328500 Instrument protector
9 501399501 Male luer jet, .32" (8 mm)
10 501399401 Female luer jet, .32" (8 mm)
11 500764400 Silicone hose with silicone jet connection 19" long x .19" diameter (482.6 mm x 4.83 mm)
1
2
3
4
57
9
6
8
Ref. CAT No. Description
1 498634400 Stand for 4 cannulas .13" to .31" diameter (3.30 mm to 7.87 mm)
2 468946600 Jet for serrated hoses .31" to .63" diameter (7.87 mm to 16 mm)
3 499225100 Large plastic funnel 1.13" diameter (28.7mm)
4 498846100 Jet for serrated hoses .06" to .81" diameter (1.52 mm to 20.57 mm)
5 499589500 Threaded sealing plug
Ref. CAT No. Description
6 498836500 Silicon jet for cannulas .13" to .31" diameter (3.30 mm to 7.87 mm)
7 501399501 Male luer jet, .32" (8 mm)
8 501399401 Female luer jet, .32" (8 mm)
9 500764400 Silicon hose with silicone jet connection 19" long x .19" diameter (482.6 mm x 4.83 mm)
mis instrument WAsh cArt Accessories
Washer-
Disinfecto
rs
WAsher-disinfectors | 1918 | WAsher-disinfectors
utensil rAcKs
Rack that holds nineteen shallow trays not exceeding 1 in (25.4 mm) in depth.
shAlloW trAY rAcK
CAT No. Description Dimensions (L x W x H), in (mm)
9500025 Shallow tray rack 19 x 19 x 11 (482.6 x 482.6 x 279.4)
Rack with six rows for basins and bowls not exceeding 2.25 in (57.15 mm) in depth.
smAll BAsin And KidneY BoWl rAcK
CAT No. Description Dimensions (L x W x H), in (mm)
9500010 Small basin and kidney bowl rack 19 x 19 x 11 (482.6 x 482.6 x 279.4)
Rack with forty-nine pegs arranged in 2.5 in (62.5 mm) spaced rows to hold miscellaneous items.
multi-use Peg BAsKet
CAT No. Description Dimensions (L x W x H), in (mm)
9500040 Multi-use peg basket 19 x 19 x 11 (482.6 x 482.6 x 279.4)
Getinge has a wide range of racks and stands for almost all types of trays and bowls. Our smart design effectively
exposes the goods to the water jets, ensuring efficient cleaning. The standing position of the goods allows for quick
runoff and effective drying.
Rack with three rows for basins and bowls not exceeding 5.5 in (139.7 mm) in depth.
lArge BAsin rAcK
CAT No. Description Dimensions (L x W x H), in (mm)
9500020 Large basin rack 19 x 19 x 11 (482.6 x 482.6 x 279.4)
Stand to accommodate up to ten B10 (Ø 225 x 95 mm) bowls. Up to two stands are placed in an OP cart on one wash level in Getinge 8666, 8668, 88 Turbo or CM320 washer-disinfector.
stAnd for BoWls 211 mm
CAT No. Description Dimensions (L x W x H), in (mm)
498850300 Stand for B10 bowls 19.45 x 16.02 x 1.57 (494 x 407 x 40)
Rack with five rows for deep trays not exceeding 2.25 in (57.15 mm) in depth.
deeP trAY rAcK
CAT No. Description Dimensions (L x W x H), in (mm)
9500030 Deep tray rack 19 x 19 x 11 (482.6 x 482.6 x 279.4)
Stand to accommodate up to fourteen kidney bowls. Up to two stands are placed in an OP cart on one wash level in Getinge 8666, 8668, 88 Turbo or CM320 washer-disinfector.
stAnd for KidneY BoWls
CAT No. Description Dimensions (L x W x H), in (mm)
498850200 Stand for kidney bowls 19.45 x 12.48 x 1.57 (494 x 317 x 40)
Rack with five rows for basins and bowls not exceeding 3 in (76.2 mm) in depth.
medium BAsin rAcK
CAT No. Description Dimensions (L x W x H), in (mm)
9500015 Medium basin rack 19 x 19 x 11 (482.6 x 482.6 x 279.4)
Stand to accommodate up to eighteen B6 (Ø 125 x 55 mm) bowls. Up to two stands are placed in an OP cart on one wash level in Getinge 8666, 8668, 88 Turbo or CM320 washer-disinfector.
stAnd for BoWls 111 mm
CAT No. Description Dimensions (L x W x H), in (mm)
498859600 Stand for B6 bowls 19.45 x 12.48 x 1.57 (494 x 317 x 40)
Stand to accommodate up to twelve B8 (Ø 160 x 80 mm) bowls. Up to two stands are placed in an OP cart on one wash level in Getinge 8666, 8668, 88 Turbo or CM320 washer-disinfector.
stAnd for BoWls 151 mm
CAT No. Description Dimensions (L x W x H), in (mm)
498859700 Stand for B8 bowls 19.45 x 12.48 x 1.57 (494 x 317 x 40)
Washer-
Disinfecto
rs
WAsher-disinfectors | 2120 | WAsher-disinfectors
mAteriAl hAndling
dischArge storAge tABle
CAT No. Description Dimensions (L x W x H), in (mm)
500093100 Without docking block – 8666 32 x 26 x 31.5(812.8 x 660.4 x 800.1)
500093101 With 1-sided docking – 8666 32 x 26 x 31.5(812.8 x 660.4 x 800.1)
500093102 With 2-sided docking – 8666 32 x 26 x 31.5(812.8 x 660.4 x 800.1)
500417600 Without docking block – 8668/88 Turbo 32 x 26 x 31.5(812.8 x 660.4 x 800.1)
500417601 With 1-sided docking – 8668/88 Turbo 32 x 26 x 31.5(812.8 x 660.4 x 800.1)
500417602 With 2-sided docking – 8668/88 Turbo 32 x 26 x 31.5(812.8 x 660.4 x 800.1)
PAss-through WindoWs
CAT No. Description
D990100 For walls 4" to 6" (101.6 mm to 152.4 mm) thick
D990181 For walls 6.63" to 8.25" (168.4 mm to 209.55 mm) thick
Our loading and unloading equipment provides excellent ergonomics and high transport safety. Additionally, our
transport equipment is designed with hygiene in mind, with easy-to-wipe surfaces and good runoff.
Auto in-line loAders And unloAders
CAT No. Description Dimensions (L x W x H), in (mm)
499925201 1-Cart Loading station – 8666 34 x 31 x 31.5(863.6 x 787.4 x 800.1)
499925200 1-Cart Unloading station – 8666 34 x 31 x 31.5(863.6 x 787.4 x 800.1)
499925101 2-Cart Loading station – 8666 63 x 31 x 31.5(1600.2 x 787.4 x 800.1)
499925100 2-Cart Unloading station – 8666 63 x 31 x 31.5(1600.2 x 787.4 x 800.1)
499925203 1-Cart Loading station – 8668/88 Turbo 38 x 31 x 31.5(965.2 x 787.4 x 800.1)
499925202 1-Cart Unloading station – 8668/88 Turbo 38 x 31 x 31.5(965.2 x 787.4 x 800.1)
500391500 2-Cart Loading station – 8668/88 Turbo 70 x 31 x 31.5(1778 x 787.4 x 800.1)
500391600 2-Cart Unloading station – 8668/88 Turbo 70 x 31 x 31.5(1778 x 787.4 x 800.1)
“smArt” trolleYs for WAsher-disinfectors
CAT No. Description Dimensions (L x W x H), in (mm)
564710171 Trolley with single-side handles 34.6 x 25.8 x 41.25 (878.8 x 655.3 x 1047.8)
564710172 Trolley with dual-side handles 34.6 x 25.8 x 41.25 (878.8 x 655.3 x 1047.8)
The Getinge “SMART” Trolleys allow for the ergonomic loading/unloading of wash carts in the Getinge 8666/8668/88 Turbo/CM320 washer disinfectors. The curved handles and specially designed casters allow for easy maneuverability. The trolleys were designed to be easy to clean either in a large chamber washer-disinfector from Getinge (9027 or 9100-series) or by using manual method.
free-stAnding return conVeYors The Getinge Free Standing Conveyor is used for transporting the loading equipment from the clean side, back to the soiled side, and is usually installed in the barrier wall between soiled and clean side. The return conveyor is equipped with a single hatch, in order to avoid air cross-contamination.
CAT No. Description Dimensions (L), in (mm)
FSC04WIN 4-cart free standing return conveyor 138.5 (3520)
FSCO5WIN 5-cart free standing return conveyor 173 (4400)
FSC07WIN 7-cart free standing return conveyor 253.5 (6436)
FSC09WIN 9-cart free standing return conveyor 322.5 (8196)
FSC011WIN 11-cart free standing return conveyor 392 (9956)
Rack with rows spaced 1.88 in (47.75 mm) apart to accommodate ten dentalcassettes. Two of these racks will fit on each shelf of a 2-level 8666 or 8668/88 Turbo wash cart for forty cassettes total.
dentAl cAssette rAcK
CAT No. Description Dimensions (L x W x H), in (mm)
D010012 Dental cassette rack 8668 / 88T 21.5 x 12 x 6 (546.1 x 304.8 x 152.4)
Rack with rows spaced 1.65 in (41.91 mm) apart to accommodate eight dental cassettes.
dentAl cAssette rAcK
CAT No. Description Dimensions (L x W x H), in (mm)
W980001 Dental cassette rack for 46-series 19.5 x 19.5 x 7 (495.3 x 495.3 x 177.8)
Photo not available
46-series
Sterilizers
22 | insPection & PAcKing AreA sterilizers | 23
Our sterilizer load cars and transfer carriages
are the ideal accessories for your steam
sterilizers. They provide ease of movement
and are designed for ergonomic and
efficient loading and transfer of goods. All of
our loading equipment and accessories are
constructed of stainless steel for long life
under severe conditions.
sterilizers
500 series loAding Accessories
The Fixed Height Trolley is designed for ergonomic handling of loads between the packing area and each sterilizer, or between the sterilizer and sterile storage. The trolley is fabricated of tubular stainless steel with four twin-wheel swivel casters, 4.9 in (125 mm) in diameter. The two rear casters feature brake locks and the two front casters feature directional (anti-swivel) locks. Press down to activate and push up to release locks.
The Load Car has four durable brass casters. The frame is constructed of 304 stainless steel material. The two shelves are formed from 304 stainless steel material and two stainless steel rods support each adjustable shelf.
500 series “smArt” fiXed height trAnsfer trolleY And loAd cAr
CAT No. Description Dimensions (L x W x H), in (mm)
564710471 500 series “SMART” transfer trolley 57.7 x 24.2 x 38.1(1465.6 x 614.68 x 967.74)
61301608380 500 series load car 36.8 x 18.3 x 17.6(934.72 x 464.82 x 447.04)
600 series loAding Accessories
The 600 series load car is constructed with a stainless steel frame and includes a bottom shelf platform for stability. Vertical corner members have intervals of holes for inserting shelf support rods to adjust the shelf spacing. Additional rods can be inserted to serve as load back-stops. Each basic load car includes one fixed shelf and two adjustable shelves with support rods. The load car has a maximum load capacity of 440 lbs (200 Kg) with each shelf having a capacity of 275 lbs (125 Kg). The 440 lbs should be distributed evenly over the total number of shelves installed on the load car.
600 series loAd cAr
CAT No. Description Dimensions (L x W x H), in (mm)
61301607935 600 series – 39" (990.6 mm) load car kit with 3 wire rack shelves
38.6 x 24.4 x 22.3(980.44 x 619.76 x 556.42)
564602270 600 series – 39" (990.6 mm) load car base with wire rack shelf
61301607937 600 series – 51" (1295.4 mm) load car kit with 3 wire rack shelves
50.4 x 24.4 x 22.3(1280.2 x 619.76 x 556.42)
564603470 600 series – 51" (1295.4 mm) load car base with wire rack shelf
The “SMART” Load Trolley is used for ergonomic handling of loads between the packing area and each sterilizer, or between the sterilizer and sterile storage. The Trolley loading table is equipped with a manually operated load latch with two positions. Turn the latch handle full to the left to dock with the sterilizer and allow the Load Car to be inserted into the sterilizer chamber; or to unload the Load Car from the chamber. Turn the handle full to the right to undock the trolley from the sterilizer. This action also locks the Load Car in place on the trolley table.
600 series “smArt” loAd trolleY
CAT No. Description Dimensions (L x W x H), in (mm)
564710672 600 series – 39" (990.6 mm) “SMART” load trolley, fixed height
59 x 24.21 x 42(1498.6 x 614.93 x 1066.8)
564710674 600 series – 51" (1295.4 mm) “SMART” load trolley, fixed height
70.43 x 24.21 x 42(1788.9 x 614.93 x 1066.8)
Sterilizers
sterilizers | 2524 | sterilizers
Modular instrument tray with perforated bottom and solid sides to prevent small instruments from sticking out. Includes carrying handles.
700 series loAding Accessories
The 700 series load car frame is constructed of tubular stainless steel. The load car is supplied with a fixed bottom shelf, for use as a flat bed, plus (2) adjustable SST shelves. Each adjustable shelf has a pair of side rails and easily accommodates various shapes and sizes and eight adjustable shelving elevations are provided to meet various item heights. The side rails are full length and easily adjusted to hold processed items within the frame of the load car.
700 series loAd cAr And trAnsfer cArriAge
CAT No. Description Dimensions (L x W x H), in (mm)
61301600644 700 series – 39" (990.6 mm)chamber load car
36 x 24 x 32.5 (914.4 x 609.6 x 825.5)
61301600645 700 series – 53" (1346.2 mm) chamber load car
48 x 24 x 32.5 (1219.2 x 609.6 x 825.5)
61301600646 700 series – 61" (1549.2 mm) chamber load car
60 x 24 x 32.5 (1524 x 609.6 x 825.5)
The transfer carriage is designed to be universal and compatible with previous Castle sterilizers of similar size. The transfer carriage is fabricated of formed stainless steel sections and rectangular stainless steel tubing, with high impact phenolic threaded casters. The height is adjustable via the threaded casters. The front casters are fixed, while the rear casters are swivel ball bearing, one with a brake. Nylon bumpers extend from the latching mechanism for protection. A self-centering latch provides alignment, and securely locks the carriage to the sterilizer for an easy and safe transfer of the load. A locking mechanism holds the load car securely on the transfer carriage. Two separate release mechanisms are provided to: a) disengage the load car from the transfer carriage; and b) disengage the transfer carriage from the sterilizer. Both release mechanisms can be either hand or knee operated.
CAT No. Description Dimensions (W x H), in (mm)
61301608855 700 series – 39" (990.6 mm) chamber transfer carriage
24 x 20.9 (609.6 x 530.86)
61301608856 700 series – 53" (1346.2 mm) chamber transfer carriage
24 x 20.9 (609.6 x 530.86)
61301608857 700 series – 61" (1549.4 mm) chambertransfer carriage
24 x 20.9 (609.6 x 530.86)
For customers who have existing Transfer Carriages, two kits are available to upgrade for interchangeability depending on manufacturing date.
CAT No. Description
61301608861 3600 Transfer Carriage Upgrade Kit (all stainless steel construction)
61301609059 3400 Transfer Carriage Upgrade Kit (painted grey enamel)
fdA 510(K) mAXimum WrAPPed instrument trAY loAds
Chamber Dimensions (L x W x H), in (mm) Cu-Ft Liters 510(K)# Model Trays Wt-lb
Small 17.5 x 17.5 x 26 (444.5 x444.5 x 660.4) 4.6 130 K103504 400HC 2 50
Small 21 x 21 x 38 (533.4 x 533.4 x 965.2) 9.7 275 K103504 500HC 3 75
Mid-Medium 26.5 x 26.5 x 26 (673.1 x 673.1 x 660.4) 10.6 300 K070657 633HC 4 64
Mid-Medium 26.5 x 26.5 x 39 (673.1 x 673.1 x 990.6) 15.5 450 K070657 633HC 8 128
Mid-Medium 26.5 x 26.5 x 51 (673.1 x 673.1 x 1295.4) 20.7 586 K070657 633HC 12 192
Medium 26.5 x 36 x 39 (673.1 x 914.4 x 990.6) 21.5 609 K120441 733HC-E 10 250
Medium 26.5 x 36 x 53 (673.1 x 914.4 x 1346.2) 29.2 827 K120441 733HC-E 15 375
Medium 26.5 x 36 x 61 (673.1 x 914.4 x 1549.4) 33.7 955 K120441 733HC-E 20 500
Floor Loader 26.5 x 62 x 42 (673.1 x 1574.8 x 1066.8) 39.6 1121 K031259 833HC 12 192
Floor Loader 26.5 x 62 x 76 (673.1 x 1574.8 x 1930.4) 72.3 2047 K031259 833HC 24 384
miscellAneous sterilizer Accessories
Air comPressor CAT No. Description
61301601462 Air Compressor (for up to two 733 or 833 sterilizers)
Peel Pouch sterilizAtion rAcK
Peel Pouch Sterilization Rack
PRODUCT
Peel Pouch Sterilization Rack
APPLICATION
Designed to hold Plastic/Paper Peel Pouches in a vertical position during a sterilization cycle.
BENEFITS
• Provides spacing to insure sterilant contact to all surfaces and drainage if moisture is presentduring a cycle
• Designed for use inside a tray for ease and safety of load removal
• Compatibility with Steam or Ethylene Gassterilizers
• Convenient and easy to use
DESCRIPTION
• 61/2" long with eight spaces for pouches
• Extra capacity coils measuring 6" high with 0.75" spacing in-between
• Durable design manufactured of 0.125" stainlesssteel wire of Type 304 material
• A right angle at each end provides support whensitting on a shelf
INSTRUCTIONS FOR USE
• Best if used in a Tray
• Do not overcrowd. One peel pouch per slot max. (Best if every other slot is used)
• Do not position pouches paper to paper where theplastic may form a barrier
• Pointed instruments can puncture a peel pouch ifcompressed into shared tray
• Do not lift the rack with the pouches in place. The pouches may fall out of the rack
Getinge USA, Inc. 1777 East Henrietta Road Rochester, New York 14623-3133 U.S.A. Telephone (585) 475-1400 Facsimile (585) 272-5033DS Peel 0305 Printed in U.S.A.
Getinge is constantly reviewing its products for improvements. Consequently, the actual product may differ slightly from the product pictured and described here.
www.getingeusa.com ®Getinge is a registered [email protected]
data and specifications
Designed to hold Plastic/Paper Peel Pouches in a vertical position during a sterilization cycle - use inside a tray for ease and safety of load removal. This rack provides spacing to insure sterilant contact to all surfaces and drainage if moisture is present during a cycle
CAT No. Description Dimensions (L x W x H), in (mm)
61301609706 Peel Pouch Sterilization Rack 6.5 x 6 x 6 (165.1 x 152.4 x 152.4)
instrument BAsKet
CAT No. Description Dimensions (L x W x H), in (mm)
9500006 Instrument Basket 10.5 x 20.5 x 3.5 (266.7 x 520.7 x 88.9)
WAter sAVer PAcKAges The Getinge MP-129 Water Saver Modernization Package is intended for use on healthcare or scientific mechanical air-removal and gravity displacement Getinge steam sterilizers. Water Consumption can be reduced significantly when the equipment is operated as recommended in the sterilizer operating instructions.
CAT No. Description Dimensions (L x W x H), in (mm)
61301609555 MP129E water saver upgrade package, 115 V for current model 800-Series steam sterilizers
19 x 10 x 37 (482.6 x 254 x 939.8)(w/o chiller coil), 19 x 10 x 63.4 (482.6 x 254 x 1610.4)(w/ chiller coil)
61301609267 MP129F water saver upgrade package, 115V for current model 400/500/600/700 steam sterilizers
19 x 10 x 37 (482.6 x 254 x 939.8) (w/o chiller coil), 19 x 10 x 63.4 (482.6 x 254 x 1610.4)(w/ chiller coil)
61301606548 Water saver coil for building-supplied water chiller
61301606605 Electric water chiller for all MP129 water savers, 115V
800 series loAding Accessories
The 4003 floor loading sterilizer cart is an all-purpose cart designed for processing, transportation and storage. The cart is constructed to resist the corrosive action of high temperature steam sterilization. The cart is specifically designed for use with Getinge Floor Loading Sterilizers and Washers. Since the cart is mobile, it saves space that would otherwise be dedicated for conventional transfer carriages.
4003 floor loAding cArt
CAT No. Description Dimensions (L x W x H), in (mm)
61301605254 4003 loading cart (includes 2 shelves/rods and swivel casters)
36.75 x 24.75 x 57.63(933.45 x 628.65 x 1463.8)
61301609557 4003RC loading cart (for use with Model 4004) (includes 2 shelves/rods and fixed casters)
36.75 x 24.75 x 57.63(933.45 x 628.65 x 1463.8)
SK46523 4004 transfer carriage for 4003 loading cart
26 | seAling eQuiPment PreP And PAcK tABle Accessories | 27
Prep
And
Pack
table A
ccessories
The prep and pack area is often the biggest
bottleneck in the sterile supplies production
process due to the manual labor involved in
sorting, inspecting, and preparing instruments
for sterilization. The Getinge Height Adjustable
Prep and Pack Workstation provides the
flexibility you need to reduce workplace
injuries while improving workflow and
maximizing efficiency.
PreP And PAcK tABle Accessories
electricAl PoWer striPs
This dual bulb, fluorescent light tilts 10° in both up and down positions and includes light, bulbs, acrylic diffuser and support brackets; requires rear support frame for mounting.
horizontAl PoWer striP
CAT No. Description
HAT-PS48 Horizontal power strip – 48" (1219.2 mm) table
HAT-PS60 Horizontal power strip – 60" (1524 mm) table
HAT-PS72 Horizontal power strip – 72" (1828.8 mm) table
This self-contained, 6-plug electrical outlet strip, pivots on axis and mounts on rear support frame.
lighting solutions
oVerheAd light Kit
CAT No. Description
HAT-OHLIGHT48 Overhead light kit – 48" (1219.2 mm) table
HAT-OHLIGHT60 Overhead light kit – 60" (1524 mm) table
HAT-OHLIGHT72 Overhead light kit – 72" (1828.8 mm) table
VerticAl PoWer striP
CAT No. Description
HAT-PSV Vertical power strip – 48" (1219.2 mm), 60" (1524 mm) or 72"(1828.8 mm) table
This self contained, 6-plug electrical outlet strip with lighted power strip, mounts on vertical part of the rear support frame
reAr suPPort frAmesThis 48 in (1219.2 mm) high, modular frame system is notched at 1 in (25.4 mm) increments for adding accessories. It mounts to rear frame of table and comes in a single section for 48 in (1219.2 mm) and 60 in (1524 mm) tables, and dual sections for 72 in (1828.8 mm) table.
CAT No. Description
HAT-RFRAME48 Rear support frame – 48" (1219.2 mm) table
HAT-RFRAME60 Rear support frame – 60" (1524 mm) table
HAT-RFRAME72 Rear support frame – 72" (1828.8 mm) table
shelVesAdditional adjustable shelves, can be mounted either parallel to work surface or at a 15° angle. Available in 12 in (304.8 mm) or 15 in (381 mm) depth.
CAT No. Description
HAT-SHELF48 12" (304.8 mm) deep adjustable shelf – 48" (1219.2 mm) table
HAT-SHELF60 12" (304.8 mm) deep adjustable shelf – 60" (1524 mm) table
HAT-SHELF72 12" (304.8 mm) deep adjustable shelf – 72" (1828.8 mm) table
HAT-DPSH48 15" (381 mm) deep adjustable shelf – 48" (1219.2 mm) table
HAT- DPSH60 15" (381 mm) deep adjustable shelf – 60" (1524 mm) table
HAT- DPSH72 15" (381 mm) deep adjustable shelf – 72" (1828.8 mm) table
frAmes And shelVes
Prep
And
Pack
table A
ccessories
PreP And PAcK tABle Accessories | 2928 | PreP And PAcK tABle Accessories
storAge Bin mounting rAil This mounting rail for storage bins mounts so that the boxes can either hang parallel to the work surface or at a 15° angle. Storage bins not included.
CAT No. Description
HAT-BINRAIL48 Storage bin mounting rail – 48" (1219.2 mm) table
HAT-BINRAIL60 Storage bin mounting rail – 60" (1524 mm) table
HAT-BINRAIL72 Storage bin mounting rail – 72" (1828.8 mm) table
storAge Bins
PlAstic storAge Bins High impact, polystyrene, red, plastic, storage bins.
CAT No. Description Dimensions (L x W x H), in (mm)
HAT-SMBIN Small storage bin 6 x 3 x 3 (152.4 x 76.2 x 76.2)
HAT-LGBIN Large storage bin 6 x 6 x 3 (152.4 x 152.4 x 76.2)
HAT-BINDIVIDE Divider for small storage bins
drAWer units
drAWersAll of the drawer units mount under the surface of the table and include an individually keyed lock. Capacity: 50 lb (23 Kg).
cPu holder This holder mounts under the surface of the table and is ideal for tower style CPUs with a maximum size of 9-1/2 W x 18 D x 19-1/2 in H (241.3W x 457.2D x 495.3H mm).
comPuter Accessories
CAT No. Description
HAT-CPUHOLD CPU holder – 48" (1219.2 mm), 60" (1524 mm) or 72" (1828.8 mm) table
flAt PAnel monitor Arm This monitor arm mounts on the rear support frame and its dual arm has both horizontal and vertical movement. Accommodates both 2.95 in (75 mm) and 3.94 in (100 mm) square monitor patterns (VESA) with a maximum capacity of 17.5 lb (8 Kg).
CAT No. Description
HAT-FPMARM CPU holder – 48" (1219.2 mm), 60" (1524 mm) or 72"(1828.8 mm) table
under-counter KeYBoArd holder This tiltable keyboard tray mounts under the work surface when not in use and includes a swivel mouse pad which can be attached to the right or left side.
CAT No. Description
HAT-KEYTRAY Under-counter keyboard holder – 48" (1219.2 mm), 60" (1524 mm) or 72" (1828.8 mm) table
fleXiBle comPuter WorKstAtion This workstation mounts on the rear support frame, and includes a dual-articulating arm and mounting bracket to accommodate flat panel monitor, keyboard, and mouse. Length: 16 in (406.4 mm).
CAT No. Description
HAT-FLEXWORK Flexible computer workstation – 48" (1219.2 mm), 60" (1524 mm) or 72" (1828.8 mm) table
CAT No. Description Dimensions (L x W x H), in (mm)
HAT-1DRAWER Single drawer – 48" (1219.2 mm), 60" (1524 mm) or 72" (1828.8 mm) table
16.75 x 13.25 x 5.75 (425.45 x 336.55 x 146.05) (internal)
HAT-2DRAWER Dual drawer – 48" (1219.2 mm), 60" (1524 mm) or 72" (1828.8 mm) table
16.75 x 13.25 x 5.75 ( 425.45 x 336.55 x 146.05) (internal)
HAT-2FILEDRAW Single drawer and file drawer – 48" (1219.2 mm), 60" (1524 mm) or 72" (1828.8 mm) table
16.75 x 13.25 x 5.75 (425.45 x 336.55 x 146.05) (internal per drawer)
sPool holder This 1 in (25.4 mm) diameter rod and brackets mounts flush with the face of the rear support frame.
sPool holder
CAT No. Description
HAT-SPOOL48 Spool holder – 48" (1219.2 mm) table
HAT-SPOOL60 Spool holder – 60" (1524 mm) table
HAT-SPOOL72 Spool holder – 72" (1828.8 mm) table
mAgnifYing light
CAT No. Description
HAT-MAGLIGHT Magnifying light
mAgnifYing light
trAnsPort & storAge | 31
Miscellaneo
us30 | PreP And PAcK tABle Accessories
miscellAnous
mArKer/tAcK BoArd This board mounts to rear support frame and is reversible (marker side and tack side). Height: 30 in (762 mm).
CAT No. Description
HAT-BOARD48 Marker board/tack board – 48" (1219.2 mm) table
HAT-BOARD60 Marker board/tack board – 60" (1524 mm) table
HAT-BOARD72 Marker board/tack board – 72" (1828.8 mm) table
BAcKstoP This backstop mounts to rear support frame and is 3 in (76.2 mm) high.
CAT No. Description
HAT-BKSTOP48 Backstop – 48" (1219.2 mm) table
HAT-BKSTOP60 Backstop – 60" (1524 mm) table
HAT-BKSTOP72 Backstop – 72" (1828.8 mm) table
footrestThis adjustable height footrest can be used flat or adjusts to angles up to 25º.
CAT No. Description Dimensions (L x W), in (mm)
HAT-FOOTRST Footrest – 48" (1219.2 mm), 60” (1524 mm) or 72" (1828.8 mm) table
15 x 21.75 (381 x 552.45)
HC
_BC
_Acc
esso
ries_
0113
.1_E
N_U
S ©
201
3 G
etin
ge
US
A, I
nc. P
rinte
d in
U.S
.A. A
rjoH
untle
igh,
GE
TIN
GE
, and
MA
QU
ET
are
reg
iste
red
tra
dem
arks
. We
rese
rve
the
right
to
mak
e ch
ang
es t
o s
pec
ifica
tions
and
pro
duc
t in
form
atio
n.
Getinge Infection Control is the world leading provider of solu-
tions for sterile processing in the healthcare sector. We aim to
ensure the highest quality and safety at the lowest total cost.
We offer complete solutions for a seamless workflow, reducing
the risk of contamination while helping healthcare to increase
efficiency.
GETINGE GROUP is a leading global provider of products and systems thatcontribute to quality enhancement and cost efficiency within healthcare and lifesciences. We operate under the three brands of ArjoHuntleigh, GETINGE andMAQUET. Arjohuntleigh focuses on patient mobility and wound managementsolutions. getinge provides solutions for infection control within healthcare and contamination prevention within life sciences. mAQuet specializes in solutions,therapies and products for surgical interventions and intensive care.www.getingeusa.com
Getinge USA, Inc.1777 East Henrietta RoadRochester, New York 14623-3133U.S.A.Phone: 800.475.9040Fax: 585.272.5033 [email protected]
Getinge Canada Ltd. 6685 Millcreek Drive, Unit 3Mississauga, ON L5N 5M5CanadaPhone: 905.363.4150Fax: [email protected]