ACCESSORIES CATALOG - ATNOVACK€¦ · boring and facing heads skoda live centers accessories...

BORING ANDFACING HEADS

SKODALIVE CENTERS

ACCESSORIES CATALOG

USAC09_Cat.qxp:Layout 1 8/18/14 11:53 AM

SKODA LIVE CENTERS

2

Features• The rotating spindle is extended right through the tapered shank• Two specially designed adjustable needle-roller bearings carry all radial loads• A heavy duty ball thrust bearing takes all axial thrust• Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by thebuilt-in oil-seal, which also prevents loss of lubricant

PARTS FOR HEAVY DUTY LIVE CENTERS

Morse 7-Roller Bearing 8-Thrust Bearing 9-Ball Bearing 10-Set Screw 11-Slot Screw 12-RingTaper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $2 310-230 33.70 310-235 33.70 310-240 20.70 310-245 1.10 310-250 0.90 310-255 0.703 310-330 51.10 310-335 39.10 310-340 21.80 310-345 0.90 310-350 1.10 310-355 0.904 310-430 57.60 310-435 44.60 310-440 22.90 310-445 0.90 310-450 1.10 310-455 1.405 310-530 69.50 310-535 55.40 310-540 27.20 310-545 0.90 310-550 1.10 310-555 1.406 310-630 121.70 310-635 89.10 310-640 32.60 310-645 1.40 310-650 1.40 310-655 1.40

Skoda Heavy Duty Live Centers - CSN 243324/CSN 243324M

Parts For Heavy Duty Live Centers

Centre MaximumMorse Point Body Body Body Weight of SKODA STMTaper Angle Dia. (in) Dia. (in) Length (in) Work Piece Code No. Price $ Code No. Price $1 60° 5⁄8 1-3⁄8 4-3⁄8 200 lb 310-105 102.60 320-105 58.002 60° 7⁄8 1-1⁄2 5 750 lb 310-110 153.00 320-110 102.703 60° 1-1⁄8 1-7⁄8 6-1⁄4 880 lb 310-115 191.30 320-115 119.004 60° 1-1⁄2 2-3⁄16 7-1⁄2 2860 lb 310-120 242.50 320-120 134.705 60° 1-3⁄4 2-3⁄4 9-1⁄2 4400 lb 310-125 335.90 320-125 173.906 60° 2-3⁄8 3-1⁄2 12-3⁄4 8800 lb 310-130 582.20 320-130 339.60

Morse 2-Point 2-Point M Model 3-Ring 3-Ring M Model 4-Sleeve 5-End Plug 6-Seal 6-Seal M ModelTaper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $2 310-205 78.20 310-205M 80.70 310-210 9.80 310-210M 10.65 310-215 51.10 310-220 6.60 310-225 8.10 310-225M 14.503 310-305 81.50 310-305M 83.50 310-310 17.40 310-310M 18.10 310-315 59.80 310-320 8.70 310-325 8.10 310-325M 17.904 310-405 107.60 310-405M 109.40 310-410 20.70 310-410M 22.30 310-415 63.00 310-420 8.70 310-425 10.50 310-425M 26.905 310-505 158.60 310-505M 163.40 310-510 22.90 310-510M 25.40 310-515 88.00 310-520 9.80 310-525 9.30 310-525M 23.706 310-605 296.50 310-605M 302.80 310-610 72.80 310-610M 73.60 310-615 116.20 310-620 21.80 310-625 9.30 310-625M 28.00

Skoda Model #CSN243324Mhas new design for part #’s2,3 & 6 (red)

All remaining parts are usedin both models


SKODA LIVE CENTERS

3

For clamping of heavy workpieces at lathes.• The rigid structure and seating of the turning part is characterizedby long service life

• The model EXTRA is commonly used for work at grindingmachines

• Centers with the apex angle of 60° for reduction of deformationsof the machine (tailstock, bed, headstock) from axial clampingforces

• The live centers are provided with shanks according to DIN 228and ISO 296 (without clamping thread)

SPARE PARTS FOR EXTRA HEAVY DUTY LIVE CENTERS

Skoda Extra Heavy Duty Live Centers - CSN 243325

Morse D d I L Load WeightTaper (in.) (in) a (in.) (in.) (lb) (lb) Code No. Price $4 3.14 1.58 60° 4.10 7.85 3300 5 310-920 1,104.005 3.54 1.65 60° 5.60 9.48 5500 9 310-925 1,361.806 4.92 2.16 60° 6.42 13.38 11000 27 310-930 2,576.407 5.70 2.56 60° 7.80 15.25 17600 45 310-935 4,479.60

Spare Parts For Extra Heavy Duty Live Centers

Parts No. Description Code No. Price $MT 4-02 90° Point 310-802 363.404-03 60° Point 310-803 374.104-04 Ring 310-804 148.404-05 End Plug 310-805 5.204-06 Sealing 310-806 7.504-07 Roller Bearing 310-807 107.304-08 Thrust Bearing 310-808 151.304-09 Radial Bearing 310-809 171.504-10 Lock Screw 310-810 1.304-11 Packing Piece 310-811 48.904-12 Packing Ring 310-812 1.904-13 Packing Ring 310-813 1.50

MT 5-02 90° Point 310-816 452.205-03 60° Point 310-817 433.505-04 Ring 310-818 197.905.05 End Plug 310-819 13.505.06 Sealing 310-820 10.605-07 Roller Bearing 310-821 160.305-08 Thrust Bearing 310-822 179.805-09 Radial Bearing 310-823 180.305-10 Lock Screw 310-824 1.305-11 Packing Piece 310-825 105.305-12 Packing Ring 310-826 2.405-13 Packing Ring 310-827 1.50

Spare Parts For Extra Heavy Duty Live Centers

Parts No. Description Code No. Price $MT 6-02 90° Point 310-830 1,058.206-03 60° Point 310-831 1,097.206-04 Ring 310-832 123.206-05 End Plug 310-833 103.406-06 Sealing 310-834 13.506-07 Roller Bearing 310-835 233.406-08 Thrust Bearing 310-836 373.806-09 Radial Bearing 310-837 279.706-10 Lock Screw 310-838 2.106-11 Packing Piece 310-839 215.106-12 Packing Ring 310-840 5.006-13 Packing Ring 310-841 1.30


SKODA LIVE CENTERS

4

SPARE PARTS FOR CNC LIVE CENTERS

3 13 12 11

4 10

• The centers are intended for NC lathes. Their face parts areformed to allow easy access of the tool to the workpiece, which isan advantage with workpieces of complex shapes

• A special ring is used to set the radial clearance of the center. Italso prevents cutting lubricant from leaking into the centerbearing space, and so extends the operational life of the center

• Spindle-like point extends into shank where it is supported by aneedle bearing, increasing rigidity, reducing point deflection anddampening vibration

Skoda Precision CNC Live Centers - CSN 243327-II

Morse D d L l LoadTaper (in.) (in) (in.) (in.) (lb) Code No. Price $2 1.5 .695 5.25 2.65 1300 310-010 304.503 1.85 .750 6.75 3.50 1550 310-015 322.904 2.20 1.125 8.15 3.95 4840 310-020 376.405 3.10 1.375 10.50 4.85 7750 310-025 473.60

Spare Parts For CNC Live Centers

Parts No. Description Code No. Price $MT 2-02 Point 310-855 270.102-03 Ring 310-857 102.102-04 Set Ring 310-856 33.702-05 End Plug 310-858 7.702-07 Needle Bearing 310-860 33.702-08 Thrust Bearing 310-861 39.102-09 Radial Bearing 310-862 65.202-10 Packing Piece 310-859 32.602-11 Snap Ring 310-865 6.602-12 Countersink Screw 310-863 1.002-13 Lock Screw 310-864 1.10

MT 3-02 Point 310-869 349.703-03 Ring 310-871 103.003-04 Set Ring 310-870 35.903-05 End Plug 310-872 8.703-07 Needle Bearing 310-874 51.103-08 Thrust Bearing 310-875 45.703-09 Radial Bearing 310-876 67.403-10 Packing Piece 310-873 33.703-11 Snap Ring 310-879 6.603-12 Countersink Screw 310-877 1.403-13 Lock Screw 310-878 1.10

Spare Parts For CNC Live Centers

Parts No. Description Code No. Price $MT 4-02 Point 310-882 384.504-03 Ring 310-884 131.404-04 Set Ring 310-883 38.304-05 End Plug 310-885 8.704-07 Needle Bearing 310-887 57.604-08 Thrust Bearing 310-888 51.104-09 Radial Bearing 310-889 72.804-10 Packing Piece 310-886 34.804-11 Snap Ring 310-892 7.704-12 Countersink Screw 310-890 1.404-13 Lock Screw 310-891 1.10

MT 5-02 Point 310-895 343.805-03 Ring 310-897 88.005-04 Set Ring 310-896 43.505-05 End Plug 310-898 9.805-07 Needle Bearing 310-900 70.605-08 Thrust Bearing 310-901 61.905-09 Radial Bearing 310-902 107.605-10 Packing Piece 310-899 37.005-11 Snap Ring 310-905 9.805-12 Countersink Screw 310-903 1.405-13 Lock Screw 310-904 1.10


SKODA LIVE CENTERS

5

• Designed to keep dust, chips and coolant from coming insidethe bearings

• Hardened and ground to 61-65 Rockwell• Concentricity within .0002"

Skoda Extended Point Live Centers - CSN 243328

Morse D d L I Load Weight PointTaper (in.) (in) (in.) (in.) (lb) (lb) Angle Code No. Price $2 1.417 .866 5.059 2.560 594 .79 60° 310-160 168.403 1.850 1.181 6.575 3.386 704 1.85 60° 310-165 199.704 2.165 1.378 8.169 4.094 2200 3.19 60° 310-170 251.005 2.736 1.772 10.197 5.078 3960 7.04 60° 310-175 346.606 3.504 2.362 13.425 6.319 12600 17.05 60° 310-180 610.50

Designed to hold pipe and hollow work. Pipe head can be used as anall-round center for light work. Two matched angular contact bearingspreloaded at the factory. This achieves good thrust and radialcapacities. Bearings are protected by a combination steel shield andneoprene seal.• Accuracy: ±0.0001"

Skoda Heavy Duty Bull Nose Live Centers - CSN 243319

Morse D d L l Load WeightTaper a (in) (in.) (in.) (in.) (lb) (lb) Code No. Price $3 60° 3.150 1.378 6.380 3.189 880 4.62 310-140 665.204 60° 4.527 1.732 7.637 3.622 2860 9.68 310-145 1,072.905 60° 5.314 1.811 9.449 4.331 4400 17.60 310-150 1,518.306 60° 6.693 2.520 12.125 4.961 8800 51.70 310-155 3,636.90


SKODA LIVE CENTERS

6

Morse All A B-G A B C D E F GTaper d l L L D D1 D D1 D D1 D D1 D2 D D1 D2 D D1 D Code No. Price $3 .590 .984 1.968 1.771 .787 .019 1.417 .236 2.480 1.299 1.417 1.102 .472 1.771 1.496 .866 .787 .098 .984 310-705 693.104 .784 1.181 2.362 2.086 .984 .019 1.771 .393 2.755 1.378 1.771 1.456 .669 2.480 2.086 1.181 .984 .196 1.259 310-710 819.305 .984 1.496 2.874 2.559 1.259 .039 2.204 .551 3.149 1.496 2.204 1.732 .787 2.775 2.362 1.417 1.259 .196 1.771 310-715 1,197.206 1.181 1.811 3.543 3.149 1.417 .039 2.755 .708 3.937 1.968 2.755 2.283 .950 3.937 3.464 2.126 1.417 .315 2.204 310-720 1,725.00

Skoda Live Center Sets - CSN 243326

Parts For Skoda Live Center Sets

Features• The rotating spindle is extended right through the tapered shank• Two specially designed adjustable needle-roller bearings carry allradial loads

• A heavy duty ball thrust bearing takes all axial thrust• Complete protection of bearings from the ingress of coolant, dirtor swarf is provided by the built-in oil-seal, which also preventsloss of lubricant

Morse Part A Part B Part C Part D Part E Part F Part GTaper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $3 310-724 126.00 310-726 182.50 310-728 223.70 310-730 191.20 310-732 190.10 310-734 171.60 310-736 144.504 310-744 145.60 310-746 208.50 310-748 272.60 310-750 198.80 310-752 206.40 310-754 154.20 310-756 156.405 310-764 156.40 310-766 221.60 310-768 338.90 310-770 228.10 310-772 331.20 310-774 179.20 310-776 177.106 310-784 171.60 310-786 283.50 310-788 449.60 310-790 294.30 310-792 427.90 310-794 202.00 310-796 237.90

Live Center Internal Wooden DriftMorse Only Point Case KeyTaper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $3 310-722 331.00 310-723 92.60 310-738 132.50 310-740 130.404 310-742 428.10 310-743 105.50 310-758 152.20 310-760 138.005 310-762 521.30 310-763 128.30 310-778 173.10 310-780 147.706 310-782 848.20 310-783 186.20 310-798 195.10 310-800 180.30

Additional Items For Skoda Live Center Sets


NAREX BORING AND FACING HEADS

Solve ALL Your Boring and Facing Problems

Universal Boring And Facing Masterhead

Standard Equipment Supplied With The Master Head In Case

Model No. VHU 36 Price $ VHU 56 Price $ VHU 80 Price $ VHU 125 Price $ VHU 160 Price $Code No. 300-007 3,592.10 300-055 4,572.20 300-105 4,830.70 300-155 6,381.70 300-205 6,920.30QUICK RETURN MOVEMENT QUICK RETURN ADJUSTMENT THROUGH SLIDE SETTING SCREW

Operating Accuracy ± .0002 ± .0002 ± .0002 ± .0002 ± .0002Boring and facing range from 0 up to 9 13 16 24 31Max. adjustability of slide 1.375 2.125 3.125 4.875 5.750Max. dia. of slide 2.750 4.250 6.250 9.750 11.500

.002 .002 .002 .002Various automatic slide – .0016 .004 .004 .004 .004feeds per revolution .0032 .006 .006 .006 .006

.0048 .008 .008 .008 .0081 graduation of sensitive .0005 .0005 .0005 .0005 .0005adjustments ins. on dia.1 Revolution of sensitive adjustment .016 .016 .016 .016 .016Quick return per revolution .030 .120 .120 .160 .160Diameter of tool post holes in slide 5⁄8 1 1 1-1⁄4 1-1⁄4Height of Head without shank 3.125 4.350 4.350 5.000 5.000Width of Head 2.875 4.500 5.500 7.000 8.725Weight of head without shank 4 lb 12 lb 16 lb 26.6 lb 31 lbAccessories 300-003 742.50 300-053 1,379.70 300-104 1,379.70 - - 300-202• 1,800.90Head only 300-004 3,013.20 300-054 3,430.50 300-103 3,636.20 300-154 4,598.60 300-203 4,949.20Case only 300-006 293.40 300-052 173.70 300-102 462.80 300-204 564.90 300-204 564.90Shank M.T. 2 300-010 284.90Shank M.T. 3 300-015 300.30Shank M.T. 4 300-020 346.60 300-060 375.40 300-110 384.10Shank M.T. 5 300-115 467.30 300-115 467.30 300-115 467.30 300-115 467.30Shank M.T. 6 300-165 569.70 300-165 569.70 300-165 569.70Shank ISA - 30 300-025 262.90Shank ISA - 40 300-030 284.90 300-070 327.90 300-070 327.90Shank ISA - 50 300-075 402.30 300-075 402.30 300-075 402.30 300-075 402.30Shank R - 8 300-035 229.30 300-080 260.10Shank Straight 3/4” 300-039 144.90Shank Straight 1” 300-040 189.00Shank Cat - 40 300-033 384.10 300-073 442.50Shank Cat - 50 300-076 467.30 300-076 467.30 300-076 467.30 300-076 467.30Shank BT - 40 300-034 384.10 300-074 436.40Shank BT - 50 300-077 467.30 300-077 467.30 300-077 467.30 300-077 467.30Tang M.T. 2 300-245 41.60Tang M.T. 3 300-250 54.60Tang M.T. 4 300-255 75.40 300-255 75.40 300-255 75.40Tang M.T. 5 300-260 91.00 300-260 91.00 300-260 91.00 300-260 91.00Tang M.T. 6 300-265 101.40 300-265 101.40 300-265 101.40

Boring bars 3⁄8 2 pcs. 1 x 4 1 x 4 1-1⁄4 x 6 1-1⁄4 x 6Boring bars 5⁄8 2 pcs. 1 x 6 1 x 6 1-1⁄4 x 9-3⁄4 1-1⁄4 x 9-3⁄4Boring bar holders *1 x 5-1⁄2 *1 x 5-1⁄2 *1-1⁄4 x 6-5⁄16 *1-1⁄4 x 6-5⁄16

*2 pcs. *2 pcs. *2 pcs. *2 pcs.Extension holder 5⁄8 x 3-7⁄8 1 x 6-7⁄8 1 x 6-5⁄8 1-1⁄4 x 11-13⁄16 1-1⁄4 x 11-13⁄16Complete set of reinforcing rings 5⁄8 1 1 1-1⁄4 1-1⁄4Carbide round tool bits *5⁄8 *1 *1 *1-1⁄4 *1-1⁄4

*4 pcs. *4 pcs. *4 pcs. *4 pcs.HSS square tool bits *5⁄16 x 1-3⁄16 *5⁄16 x 1-3⁄16 *3⁄8 x 1-13⁄32 *3⁄8 x 1-13⁄32

*4 pcs. *4 pcs. *4 pcs. *4 pcs.Reducing sleeve 5⁄8 x 3⁄8 1 x 3⁄4 1 x 3⁄4 1-1⁄4 x 3⁄4 1-1⁄4 x 3⁄4Reducing sleeve 1 x 5⁄8 1 x 5⁄8 1-1⁄4 x 5⁄8 1-1⁄4 x 5⁄8

• Available only while supplies last.

7



Principal Component Part of Head Vhu-361. Braking ring2. Engaging ring3. Control ring4. Scale5. Slide6. Setting screw7. Holes for tools8. Clamping screws9. Screw for locking slide

in position

10. Stop dog11. Stop dog pin12. Knob for rapid traverse

control (only in Vhu 1-1/4)13. Lubricator14. Screw for clutch adjustment15. Clutch16. Retaining rod

Basic machining operations shown for theVhu type universal boring heads:1. Boring of holes2. Spotfacing of small end

large-diameter end faces3. Recessing inside holes4. Recessing on surfaces

of parts5. Free recessing

6. External diametermachining

7. Boring of tapered holes8. External machining of taper9. Facing of rear end faces10. Thread cutting

8



9

VHU 36

NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160



10

NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 CONTINUED



11

VHU-36 (1-3/8”) VHU-56 (2-1/8”) VHU-125 (4-7/8”)New VHU-80 (3-1/8”) VHU-160 (6-1/4”)ID No. Description pcs Code No. Price $ pcs Code No. Price $ pcs Code No. Price $

1 Cap Screw 4 300-770 0.90 4 300-588 1.50 4 300-588 1.502 Ring 1 300-702 43.30 1 300-503 161.20 1 300-603 86.103 Pin 1 300-736 0.90 1 300-551 0.90 1 300-655 0.904 Flange (Hold-Ring) 1 300-771 290.50 1 300-480(vhu-56) 304.50 1 300-691 537.40

1 300-591(vhu-80) 501.505 Clutch Pin (Safety pin) 1 300-726 35.80 1 300-505 46.80 1 300-605 46.806 Hold Ring (Brake ring) 1 300-703 207.90 1 300-504 394.10 1 300-604 358.307 Set Ring 1 300-704 197.10 1 300-506 261.70 1 300-606 294.008 Pin 2 300-736 0.90 2 300-554 0.60 2 300-658 0.609 Ring (Control Ring) 1 300-705 139.80 1 300-507 272.60 1 300-607 318.9010 Spring 2 300-720 0.90 1 300-540 1.20 1 300-640 1.2011 Spring 6 300-707 0.90 8 300-511 0.60 8 300-611 0.6012 Pin 6 300-708 17.40 8 300-509 43.00 8 300-609 43.0013 Cap Screw 1 300-764 0.90 1 300-546 10.90 1 300-650 10.9014 Cover (Lid) 1 300-716 23.00 1 300-518 17.40 1 300-618 27.9015 Washer 1 300-765 8.60 1 300-541 12.70 1 300-646 12.7016 Star Gear (Ratchet Wheel) 1 300-715 61.10 1 300-520 75.50 1 300-620 79.1017 Washer (Ring) 1 300-718 43.30 1 300-522 73.20 1 300-622 73.2018 Slideguide 1 300-710 107.50 1 300-413(vhu-56) 129.40 1 300-613 179.10

1 300-513(vhu-80) 136.3019 Screw 1 300-577 2.90 1 300-653 1.5020 Spring 1 300-536 1.20 1 300-670 1.2021 Brake 1 300-521 12.70 1 300-621 12.7022 Washer (Ring) 2 300-722 50.30 2 300-525 61.10 2 300-625 61.1023 Pin 2 300-769 0.60 2 300-551 0.90 2 300-655 0.9024 Stop Screw 2 300-739 0.90 4 300-549 1.50 4 300-644 1.5025 Stop (Dog) - L.H. Stop 2 300-728 64.60 1 300-515 96.90 1 300-615 96.9026 Stop Nut (Insert) 2 300-742 40.30 2 300-514 29.10 2 300-614 29.1027 Slide 1 300-713 2,008.80 1 300-402(vhu-56) 2,302.10 1 300-602 3,003.60

1 300-502(vhu-80) 2,445.30 1 300-680 3,633.1028 Pin (Bar) 1 300-747 16.80 1 300-524 16.80 1 300-624 20.9029 Spring 1 300-746 0.60 1 300-570 1.90 1 300-670 1.2030 Set Screw 1 300-774 0.90 1 300-508 1.20 1 300-671 0.9031 Set Screw 3 300-735 4.80 3 300-568 9.50 3 300-674 9.50

5 300-674 9.5032 Set Screw 3 300-741 4.80 3 300-567 9.50 3 300-673 9.50

5 300-673 9.5033 Ball 3 300-775 0.60 3 300-558 0.60 3 300-661 0.6034 Worm Rod (Screw) 1 300-712 465.80 1 300-423(vhu-56) 573.20 1 300-623 788.10

1 300-523(vhu-80) 716.50 1 300-692 895.6035 Washer (Distance Ring) - Spacer 1 300-727 43.30 1 300-537 43.30 1 300-637 43.3036 Pin 2 300-777 0.90 2 300-553 0.90 2 300-657 0.6037 End Stop (Back Bearing) 1 300-717 57.60 1 300-538 50.30 1 300-638 61.1038 End Screw 2 300-776 0.90 2 300-543 0.90 2 300-648 0.9039 Stop (Dog) - R.H. Stop 1 300-516 96.90 1 300-616 96.9040 Gear Ring 2 300-721 50.30 2 300-526 50.30 2 300-626 50.3041 Spindle (Worm) 1 300-709 318.90 1 300-512 429.90 1 300-612 465.8042 Worm Gear (Worm Wheel) 1 300-723 408.80 1 300-417 494.50 1 300-617 430.2043 Pin (Parallel Key) 1 300-766 8.60 1 300-519 8.60 1 300-619 8.6044 Head Nut 3 300-749 0.90 3 300-572 0.90 4 300-647 0.9045 Head Screw 3 300-748 0.90 3 300-545 1.50 4 300-649 1.50

Narex Boring And Facing Head Parts



VHU-36 (1-3/8”) VHU-56 (2-1/8”) VHU-125 (4-7/8”)New VHU-80 (3-1/8”) VHU-160 (6-1/4”)ID No. Description pcs Code No. Price $ pcs Code No. Price $ pcs Code No. Price $47 Ring (Control Ring) 1 300-706 247.30 1 300-510 394.10 1 300-610 429.9048 Pin 2 300-738 0.60 2 300-556 2.90 2 300-659 2.9049 Ball 2 300-744 0.60 2 300-558 0.60 2 300-661 0.6050 Stop Rod (Bar) 1 300-734 16.80 1 300-535 31.50 1 300-635 42.1051 Knob (Ball) 1 300-559 2.30 1 300-662 2.3052 Screw 1 300-763 0.90 1 300-547 0.90 1 300-651 0.9053 Spring 1 300-724 0.90 1 300-529 0.90 1 300-629 0.9054 Pin Point 1 300-725 29.10 1 300-530 35.80 1 300-630 35.8055 Ball 1 300-751 0.6056 Cap Screw 1 300-740 46.8057 Pin 1 300-732 12.7058 Pin 1 300-719 12.7059 Pin 1 300-779 0.6060 Cap Screw 6 300-770 0.90 6 300-481(vhu-56) 1.50 6 300-689 1.50

6 300-589(vhu-80) 0.9061 Pin 1 300-778 0.6062 Plug 2 300-780 5.10 2 300-592 5.10 2 300-694 5.1063 Ring Clip (Circlip) 1 300-750 2.40 1 300-560 8.60 1 300-663 11.2064 Parallel key 4 300-587 25.00 4 300-687 25.0065 Screw 4 300-590 0.90 4 300-690 0.9066 Pin 1 300-781 8.10 1 300-593 12.10 1 300-695 11.5067 Set Screw 2 300-741 4.80 2 300-567 9.50 2 300-673 9.5068 Screw 2 300-548 4.80 2 300-652 4.8069 Pin 1 300-782 0.90 1 300-594 0.90 1 300-696 0.90101 Boring tool Ø5mmx3/8"x60mm 1 300-754 188.30102 Boring tool Ø13mmx5/8"x90mm 1 300-752 193.60103 Internal corner tool Ø5mmx3/8"x60 1 300-755 274.30104 Internal corner tool Ø13mmx5/8"x90 1 300-753 258.10105 Right hand tool S20 1 300-759 80.80 1 300-565 113.10 1 300-668 150.80106 Right hand tool H10 1 300-758 80.80 1 300-575 113.10 1 300-677 150.80107 Left hand tool S20 1 300-757 80.80 1 300-566 113.10 1 300-666 150.80108 Left hand tool H10 1 300-756 80.80 1 300-576 113.10 1 300-676 150.80109 Tool HSS 2 300-564 57.60 2 300-667 68.20110 Tool S20 2 300-563 39.70 2 300-669 109.60111 Extension (Boring bar) 1 300-528 193.60 1 300-628 311.80112 Extension (Boring bar) 1 300-527 193.60 1 300-627 333.30113 Toolholder (Holder with screw) 2 L=185 300-534 528.60 2 300-634 557.90114 Toolholder (Holder with screw) 1 300-731 394.10 1 L=220 300-533 557.90 1 L=350 300-633 631.30115 Collar Set (Set of spacing tubes) 1 300-730 50.30 1 300-532 80.80 1 300-632 100.50116 Reducer (Reduction sleeve) 1 300-733 139.80 1 300-542 161.20 1 300-641 193.60117 Reducer (Reduction sleeve) 1 300-544 161.20 1 300-608 197.10118 Allen (Hexagon) Wrench "NAREX" 1 300-773 51.50119 Allen (Hexagon) Wrench 4 1 300-760 39.70 1 300-561 39.70 1 300-664 39.70120 Hexagon wrench 6 1 300-562 48.50 1 300-665 125.40121 Washer 1 300-729 30.90 1 300-531 46.80 1 300-631 46.80122 Hex Screw 1 300-743 0.90 1 300-550 2.20 1 300-654 2.2027P Slide-set

consists of parts: 27+36+37+38+28+29+30+31+3234P Screw-set

consists of parts: 34+42+40+22+35+2342P Worm wheel-set

consists of: 42+40+22+23

Narex Boring And Facing Head Parts

Toll Free: 1-800-265-8221Phone: (519) 748-5750Toll Free Fax: 1-866-511-7692Fax: (519) 748-9304Email: [email protected]: www.sowatool.com

416 Dussel DriveMaumee, Ohio43537

Maumee, Ohio

*USAC14*Printed In Canada

Distributed By:

Pricing in US Dollars subject to change without notice.


ACCESSORIES CATALOG - ATNOVACK€¦ · boring and facing heads skoda live centers accessories...

Documents

Transcript of ACCESSORIES CATALOG - ATNOVACK€¦ · boring and facing heads skoda live centers accessories...