Accesorii scule electrice Lukas

374 Tool-sets/Accessories

Content

Description Pgae

• Arbors for Felt Polishing Wheels 375

• Arbors for tools with internal threade 375

• Mounting arbors for small cutting-off wheels 376

• Mounting system for polishing wheels 376

• Adapter for SFI and SFA 377

• Reducing bushes 377

• Handstones 378

• Tool-sets 379

• Health and safety equipment 390

Product line marking

The product lines are additionally marked on the table with the product line heading.

Further information on page 14 and 15.

Ordering example: A1630780

Packing unit:5 psc. per type

07_Lukas_PP_2012_hellgrau_text_Layout 1 01.02.12 15:21 Seite 374

375

Industry

Industry

Tool-sets/Accessories

Arbors for Felt Polishing Wheels

Description ad1 al2 ad2 al1 an max. aProduct-Number a aamm amm amm amm a(1/min) a a aa a a a a a a a

ASB 780 aM6 a20 a6 a63 a7.000 aA1630780 a a a a a a a a a a ■

ASB 781 aM6 a30 a6 a73 a7.000 aA1630781 a a a a a a a a a a ■


Packing unit:5 pcs. per type

Two washers and a nut are supplied per arbor.

Arbors for tools with internal thread

Description ad1 al2 ad2 al1 aProduct-Number a aamm amm amm amm a a aa a a a a a a

ASB 342 B aM 10 a12 a6 a52 aA16303422 a a a a a a a a a a ■

ASB 342 C aM 12 a14 a6 a54 aA16303423 a a a a a a a a a a ■

ASB 342 D aM 8 a10 a6 a50 aA16303424 a a a a a a a a a a ■


ASB 344 C aM 12 a14 a8 a54 aA16303443 a a a a a a a a a a ■





376

Industry

Industry

Das Spannsystem für Polierscheiben, bestehend aus einer Kunststoffbüchse (MCA)

und dem Aufspanndorn mit Schaft 8 mm (K25), der Form SE1 ist ausschließlich für die

Abmessungen 10010.25 und 10020.25 einsetzbar. Polierscheiben größeren Durch-

messers dürfen mit diesem System nicht eingesetzt werden. Die höchstzulässige

Schnittgeschwindigkeit für dieses Spannsystem beträgt 10 m/s. Dies entspricht bei

einem Scheibendurchmesser von 100 mm maximal 1.900 rpm.

NEW

NEW

NEW

Mounting system for polishing wheels Ordering example: A6981008000

Packing unit:1 pc. per type

Description aProduct-Number arecommended for aa a aa a a

Mounting system MCA + K25 aA6981008000 a a a a a a a a a a ■

Mounting arbors for small cutting-off wheels Ordering example: A36600060604


Description aTools‘ aL0 ad2 aProduct-Number a aainternal a amm a a aadiameter mm a a a a a

ASB 6/6 a6 a0- 4 a6 aA36600060604 a a a a a a a a a a ■

ASB 6/10 a10 a0- 4 a6 aA36600061004 a a a a a a a a a a ■


The mounting system for polishing wheels consists of a plastic sleeve (MCA) and a

mounting arbor with 8 mm diameter shaft (K25) which is solely applicable to shape

SE1 in the dimensions 10010 B 25 and 10020 B 25. It is not permitted to use this

mounting system for polishing wheels with larger diameters. Maximum peripheral

wheel speed using this mounting method is 10m/s; this means a maximum spindle

speed of 1900 R.P.M. with a wheel diameter of 100 mm.


377

Industry

Industry

Industry


Adapter for SFI

Description ad2 al1 aS al2 aProduct-Number a aamm amm amm amm a a aa a a a a a a

WADI 0404 a6 a80 aM4 a4 aA36300404 a a a a a a a a a a ■






Used only for mounted flap wheels page 257.

Adapter for SFA

Description ad2 al1 aB aProduct-Number a aamm amm amm a a aa a a a a a

WADA 05 a6 a100 aM5 aA36300518 a a a a a a a a a a ■



Used only for mounted flap wheels page 258.

Reducing bush

Description ad1 ad2 al1 aProduct-Number a aamm amm amm a a aa a a a a a

SP 6 a3 a6 a25 aA3630006 a a a a a a a a a a ■

SP 8 a6 a8 a25 aA3630008 a a a a a a a a a a ■




378

Industry

Handstones

half round

Available dimensions for handstones

Shape length mm width mm heigth mm

25 15 5 to 30

48 19 5 to 30

50 25 10 to 35

100 30 10 to 35

100 50 10 to 35

120 10 5 to 35

150 25 10 to 35

150 50 10 to 35

200 50 10 to 35

216 78 20 to 35

150 13 5 to 35

Description aQuality aL aB aC aProduct-Number arecommended for aa amm amm amm a a aa a a a a a a

RU 1 aSICGR 60 O V23/green=fine a50 a25 a15 aA204300000118 a a a a a a a a a� a ■

RU 1 aSICDKL 24 O V23/dark=coarse a50 a25 a15 aA204300000122 a a a a a a a a a� a ■







RU 5 aEKW 100 E (9) V40 a150 a25 a16,5 aA2043150251608 a a a� a a a a a a a ■

RU 6 aEKW 100 E (9) V40 a200 a50 a25 aA2043200502508 a a a� a a a a a a a ■



Further dimensions (see table below) and qualities on request.



379

Industry

Tool-sets

Description apiece aContent aProduct-Number a aa a a a aa a a a a

WK 10 a8 pcs. aBurrs of HSS aA12390010 a a a a a a a a a a ■

a aMFA 1225.06, Z1 + Z3 MFC 1225.06, Z1 + Z3 a a a a a a a a a a aa aMFD 1210.06, Z1 + Z3 MFM 1225.06, Z1 + Z3 a a a a a a a a a a aa a a a a a a a a a a a aa aMounted points a a a a a a a a a a aa8 pcs. aZY 0610.06, EKR ZY 1020.06, EKR a a a a a a a a a a aa aZY 1632.06, EKR ZY 1632.06, NK-BA-hard a a a a a a a a a a aa aZY 3208.06, NK-BA-hard SP 2032.06, EKR a a a a a a a a a a aa aKU 1616.06, EKR KU 3232.06, EKR a a a a a a a a a a aa a a a a a a a a a a a aa3 pcs. aPolishing points a a a a a a a a a a aa aP2ZY 1320.06, grit 120 P2SP 1320.06, grit 120 a a a a a a a a a a aa aP2KU 1616.06, grit 120 a a a a a a a a a a aa a a a a a a a a a a a aa6 pcs. aMounted flap wheels a a a a a a a a a a aa aSFL 03010.06, grit 120 SFL 04020.06, grit 120 a a a a a a a a a a aa aSFL 06030.06, grit 80 SFL 06030.06, grit 120 a a a a a a a a a a aa aSFV 04020.06, A 104 SFM 04020.06, A 104/80 a a a a a a a a a a aa a a a a a a a a a a a aa1 pc. aTechnical brush a a a a a a a a a a aa aBSSW 05010 a a a a a a a a a a a



Assortment containing:8 pcs. Burrs of HSS8 pcs. Mounted points3 pcs. Polishing points6 pcs. Mounted flap wheels1 pc. Technical brush

Outside dimension of box: 350 x 92 x 322 mm



380

Industry


Tool-sets

Description apiece aContent aProduct-Number a aa a a a aa a a a a

WK 20 a22 pcs. aBurrs of HSS aA12390020 a a a a a a a a a a ■

a aMFA 0616.06, Z1 + Z3 MFA 1225.06, Z1 + Z3 a a a a a a a a a a aa aMFC 0620.06, Z1 + Z3 MFC 1225.06, Z1 + Z3 a a a a a a a a a a aa aMFD 0605.06, Z3 MFD 1210.06, Z1 + Z3 a a a a a a a a a a aa aMFD 1614.06, Z3 MFG 0618.06, Z1 + Z3 a a a a a a a a a a aa aMFG 1230.06, Z1 + Z3 MFK 1230.06, Z3 a a a a a a a a a a aa aMFM 0618.06, Z1 + Z3 MFM 1225.06, Z1 + Z3 a a a a a a a a a a aa aMFW 0830.06 a a a a a a a a a a aa a a a a a a a a a a a aa15 pcs. aMounted points a a a a a a a a a a aa aZY 0610.06, EKR ZY 0610.06, EKWbr a a a a a a a a a a aa aZY 1020.06, EKR ZY 1020.06, EKWbr a a a a a a a a a a aa aZY 1632.06, EKR ZY 1632.06, EKWbr a a a a a a a a a a aa aZY 1632.06, NK-BA-hard ZY 3208.06, EKR a a a a a a a a a a aa aZY 3208.06, NK-BA-hard SP 0816.06, EKR a a a a a a a a a a aa aSP 2032.06, EKR TO 2020.06, EKR a a a a a a a a a a aa aKU 0606.06, EKR KU 1616.06, EKR a a a a a a a a a a aa aKU 3232.06, EKR a a a a a a a a a a aa a a a a a a a a a a a aa11 pcs. aMounted flap wheels a a a a a a a a a a aa aSFL 03010.06, grit 60 SFL 03010.06, grit 120 a a a a a a a a a a aa aSFL 04020.06, grit 60 SFL 04020.06, grit 120 a a a a a a a a a a aa aSFL 06030.06, grit 40 SFL 06030.06, grit 80 a a a a a a a a a a aa aSFL 06030.06, grit 120 SFV 04020.06, A 104 a a a a a a a a a a aa aSFV 04020.06, A 106 SFM 04020.06, A104/80 a a a a a a a a a a aa aSFM 04020.06, A 106/150 a a a a a a a a a a aa a a a a a a a a a a a aa3 pcs. aTechnical brushes a a a a a a a a a a aa aBSSW 05010, BSSW 07018, BPSW 02525 a a a a a a a a a a aa a a a a a a a a a a a aa7 pcs. aPolishing points a a a a a a a a a a aa aP2ZY 0616.06, grit 120 P2ZY 1320.06, grit 120 a a a a a a a a a a aa aP2ZY 1632.06, grit 120 P2ZY 3232.06, grit 120 a a a a a a a a a a aa aP2SP 1320.06, grit 120 P2KU 1616.06, grit 120 a a a a a a a a a a aa aP6MA 3030.06, SC 46 MWP a a a a a a a a a a a



Assortment containing:22 pcs. Burrs of HSS15 pcs. Mounted points7 pcs. Polishing points

11 pcs. Mounted flap wheels3 pcs. Technical brushes



381

Industry

Industry


Tool-sets Tungsten Carbide Burrs, cut 7, shank 3 mm

Description aShank aCut aContentsa1 piece each aProduct-Number arecommended for aaØ a a a a a aamm amm a a a a a

F10 S3 a3 aZ7 a10-piecesaHFA 0313, HFA 0613, HFC 0313, HFC 0613, aA10390010 a� a� a� a a� a a� a a a ■

a a a aHFD 0302, HFD 0605, HFG 0313, HFG 0613, a a a a a a a a a a aa a a aHFM 0613, HFF 0313 a a a a a a a a a a a



Tool-sets Tungsten Carbide Burrs, cut 7, shank 6 mm

Description aShank aCut aContentsa1 piece each aProduct-Number arecommended for aaØ a a a a a aamm amm a a a a a

F10 S6 a6 aZ7 a10-piecesaHFAS 0616, HFAS 1225, HFC 0616, aA1039001006 a� a� a� a a� a a� a a a ■

a a a aHFC 1225, HFD 0605, HFD 1210, HFG 0618, a a a a a a a a a a aa a a aHFG 1225, HFF 0820, HFF 1225 a a a a a a a a a a a




382

Industry

Industry


Tool-sets Burrs of HSS, cut 5, shank 3 mm

Description aShank aCut aContentsa1 piece each aProduct-Number arecommended for aaØ a a a a a aamm a a a a a a

F1 a3 aZ5 a10-piecesaMF 807, MF 813, MF 841, MF 845, aA1239000110 a� a� a a a a a a a a ■

a a a aMF 850, MF 853, MF 864, MF 866, a a a a a a a a a a aa a a aMF 872, MF 874 a a a a a a a a a a a



Tool-sets Burrs of HSS, cut 3, shank 6 mm


F3 a6 aZ3 a10-piecesaMFA 0616, MFA 1225, MFC 1225, aA12390003 a� a� a a a a a a a a ■

a a a aMFD 0403, MFD 1210, MFE 1220, a a a a a a a a a a aa a a aMFG 1230, MFH 1230, MFK 0620, a a a a a a a a a a aa a a aMFM 0618 a a a a a a a a a a a




383

Industry


Tool-sets Burrs of HSS, cut 3 and cut 5, shank 6 mm


F4 a6 aZ3/Z5 a20-piecesaZ3 aA12390004 a� a� a a a a a a a a ■

a a a aMFA 0616, MFA 1013, MFA 1225, a a a a a a a a a a aa a a aMFC 1225, MFD 0807, MFD 1210, a a a a a a a a a a aa a a aMFE 1220, MFE 1625, MFG 1220, a a a a a a a a a a aa a a aMFG 1230, MFK 1230, MFL 1630, a a a a a a a a a a aa a a aMFM 0618, MFM 1230, MFN 1213, a a a a a a a a a a aa a a aMFN 1230 a a a a a a a a a a aa a a aZ5 a a a a a a a a a a aa a a aMFA 0304, MFA 0607, MFN 0303, a a a a a a a a a a aa a a aMFN 0606 a a a a a a a a a a a




384

Industry

www.lukas-erzett.com


Assortment, Polishing points, group P1

Description aContents a1 piece each aProduct-Number arecommended for aa a a a aa a a a a

Assortment 114 a14-piecesaP1ZY 0408.03; P1ZY 0510.03; P1ZY 0610.03;P1ZY 0710.03; aA2600114 a� a� a� a a� a a� a a a ■

a aP1ZY 0810.03; P1ZY 1010.03; P1ZY 1013.03; P1ZY 1016.03; a a a a a a a a a a aa aP1ZY 1303.03; P1ZY 1313.03; P1ZY 1316.03; P1ZY 1604.03; a a a a a a a a a a aa aP1ZY 1616.03; P1ZY 2006.03 a a a a a a a a a a a



vmax.: 50 m/s

Frank Gräbe

Sales DepartmentAngle grinder with turbine drive:

Easy to handle, strong and sturdy. My customers are truly convinced.

Always the right tool


385

High Performance

Industry


Mounted points-Assortments, Quality EKR

Mounted points-Assortments, Quality NDW

Description aShank aQuality aContents a 1 piece each aProduct-Number arecommended for aaØ mm a a a a a aa a a a a a a


Assortment 14 a3 aEKR a14-piecesaZY 0205, ZY 0306, ZY 0408, ZY 0510, aA204700001402 a� a� a� a a a a a a a ■

a a a aZY 0610, ZY 0810, ZY 0816, ZY 1010, a a a a a a a a a a aa a a aZY 1013, ZY 1313, KU 0808, ZY 1303, a a a a a a a a a a aa a a aZY 1604, ZY 2006 a a a a a a a a a a a

Assortment 10 a3 x 50 aNDW a10-piecesaZY 0408, ZY 0610, ZY 0810, ZY 1013, aA201000000353 a a� a� a a a a a a a ■

a a a aSP 0510, SP 0810, KU 0404, KU 0606, a a a a a a a a a a aa a a aKU 0808, WR 1013 a a a a a a a a a a a






386

Industry

Industry





Assortment 36 a3 aEKR a36-piecesaD1, D2, D3, D4, D5, D6, D7, D8, D9, aA204800003602 a� a� a� a a a a a a a ■

a a a aD10, D11, D12, D13, D14, D15, D16, a a a a a a a a a a aa a a aD17, D18, D19, D20, D21, D22, D23, a a a a a a a a a a aa a a aD24, D25, D26, D27, D28, D29, D30, a a a a a a a a a a aa a a aD31, D32, D33, D34,D35, D36 a a a a a a a a a a a


Mounted points-Assortments, Quality EKBR


Assortment 36 a3 aEKBR a36-piecesaD1, D2, D3, D4, D5, D6, D7, D8, D9, aA204800003611 a a� a� a a a a a a a ■

a a a aD10, D11, D12, D13, D14, D15, D16, a a a a a a a a a a aa a a aD17, D18, D19, D20, D21, D22, D23, a a a a a a a a a a aa a a aD24, D25, D26, D27, D28, D29, D30, a a a a a a a a a a aa a a aD31, D32, D33, D34, D35, D36 a a a a a a a a a a a




387

Industry




Assortment 45 a6 aEKR a45-piecesaZY 0306, ZY 0510, ZY 0408, ZY 0610, aA204600000202 a� a� a� a a a a a a a ■

a a a aZY 0810, ZY 0816, ZY 1010, ZY 1020, a a a a a a a a a a aa a a aZY 1032, ZY2 1303, ZY 1313, ZY 1320, a a a a a a a a a a aa a a aZY2 1604, ZY 1616, ZY 1620, ZY 1632, a a a a a a a a a a aa a a aZY2 2006, ZY 2020, ZY 2025, ZY 2032 a a a a a a a a a a aa a a aZY 2040, ZY2 2506, ZY2 2510, ZY 2520, a a a a a a a a a a aa a a aZY 2525, ZY 2532, ZY2 3208, ZY 3220, a a a a a a a a a a aa a a aZY 3232, ZY2 4010, ZY 4020, SP 0816, a a a a a a a a a a aa a a aSP 1020, SP 1320, SP 2032, KE 1632, a a a a a a a a a a aa a a aKE 1640, KE 2032, KE 2040, KU 1010, a a a a a a a a a a aa a a aKU 1313, KU 1616, KU 2020, KU 2525, a a a a a a a a a a aa a a aKU 3232 a a a a a a a a a a a




388

Industry

Industry

Mounted points-Assortments –STEEL

Mounted points-Assortments – INOX



Assortment STEEL a6 aEKR a5-pieces aZY 1632.06, EKR 46 N V4 aA20480005602 a� a� a� a a a a a a a ■

a a a aZY 2525.06, EKR 36 N V4, a a a a a a a a a a aa a a aWKS 2025.06, EKR 60 N V4, a a a a a a a a a a aa a a aKU 2525.06, EKR 36 N V4, a a a a a a a a a a aa a a aKE 1632.06, EKR 46 N V4 a a a a a a a a a a a

Assortment INOX a6 aNK BA a4-pieces aZY 1332.06, NK 24 N BA soft, aA20480004627W a a� a� a a a a a a a ■

a a a aZY 2040.06, NK 24 N BA soft, a a a a a a a a a a aa a a aZY2 4006.06, NK 24 N BA soft, a a a a a a a a a a aa a a aKU 2525.06, NKB/NK 24 R BA 98 a a a a a a a a a a a


Ordering example: A20480004627W





389

Industry


Mounted caps-Assortments

Description apiece aContents aProduct-Number arecommended for aa a a a aa a a a a

WS 65 a aAbrasive Caps, grit NK 150 aA210000065 a� a� a� a a� a a� a� a a ■

a50 pcs. aSKKE 0515 a a a a a a a a a a aa100 pcs. of aSKZY 0510, SKWR 0511, SKWK 0511 a a a a a a a a a a aa50 pcs. of aSKZY 0712, SKWR 0713, SKWK 0713 a a a a a a a a a a aa20 pcs. of aSKZY 1015, SKWR 1015 a a a a a a a a a a aa10 pcs. aSKKE 1125 a a a a a a a a a a aa a a a a a a a a a a a aa aAbrasive Caps, grit NK 80 a a a a a a a a a a aa20 pcs. aSKWK 1015 a a a a a a a a a a aa10 pcs. of aSKZY 1317, SKWR 1319, SKWK 1319, SKKE 1632 a a a a a a a a a a aa15 pcs. of aSKWK 1626, SKWR 1626 a a a a a a a a a a aa a a a a a a a a a a a aa aMandrels, Shank 3 mm a a a a a a a a a a aa2 pcs. of aGTZY 0510,GTWR 0511, GTWK 0511, GTZY 0712, a a a a a a a a a a aa aGTWR 0713, GTWK 0713 a a a a a a a a a a aa1 pc. of aGTZY 1015, GTWR 1015, GTWK 1015, GTZY 1317, a a a a a a a a a a aa aGTWR 1319, GTWK 1319 a a a a a a a a a a aa a a a a a a a a a a a aa aMandrels, Shank 6 mm a a a a a a a a a a aa1 pc. of aGTKE 0515, GTKE 1125, GTWK 1626, GTWR 1626, a a a a a a a a a a aa aGTKE 1632 a a a a a a a a a a a

WS 65 Z a aAbrasive Caps, see WS 65 aA210000065Z a� a� a� a a� a a� a� a a ■

a a a a a a a a a a a a aa aMandrels, Shank 1/8 inch a a a a a a a a a a aa2 pcs. of aGTZY 0510,GTWR 0511, GTWK 0511, GTZY 0712, a a a a a a a a a a aa aGTWR 0713, GTWK 0713 a a a a a a a a a a aa1 pc. of aGTZY 1015, GTWR 1015, GTWK 1015, GTZY 1317, a a a a a a a a a a aa aGTWR 1319, GTWK 1319 a a a a a a a a a a aa a a a a a a a a a a a aa aMandrels, Shank 1/4 inch a a a a a a a a a a aa1 pc. of aGTKE 0515, GTKE 1125, GTWK 1626, GTWR 1626, a a a a a a a a a a aa aGTKE 1632 a a a a a a a a a a a



Assortment containing:640 pcs. Abrasive Caps23 pcs. Mandrels


NK = regular Aluminium Oxide


390

IndustryIndustry

Industry

Industry

Tool-sets/Accessories/Health and safety equipment

Safety glasses, UVEX i-vo

Breathing protection mask, UVEX Silv Air

Safety gloves, UVEX TOP GRADE

Description aProduct-Number a aa a aa a a

Description aProtection level aProduct-Number a aa a a aa a a a

Description aSize aProduct-Number a aa a a aa a a a

UVEX i-vo aA364110 a a a a a a a a a a ■

UVEX Silv Air aFFP3 aA364210 a a a a a a a a a a ■

UVEX TOP GRADE a10 aA364310 a a a a a a a a a a ■







This UVEX-safety glasses provide you an optimum protection and because of the unique two-component technology they are very comfortably to wear.

UVEX-preformed mask with exhalation valve, featuring an innovative design and an optimised shape.

Split-leather safety glove with high wearing comfort Characteristics:

– Cut resistance, soft, supple leather

– Index finger, fingertips, knuckle trim and thumb


391

Industry

Industry

Tool-sets/Accessories/Health and safety equipment



MOLDEX Jazz-Band aA364410 a a a a a a a a a a ■

MOLDEX Jazz-Band E aA364411 a a a a a a a a a a ■




Packing unit:25 pcs. per set

Comfortable and high quality banded ear plug from MOLDEX ideal for various noise levels. The package includes a set of ear plugs on a string and two spare foam ear plugs.

Comfortable foam ear plugs for change

Banded ear plugs, MOLDEX Jazz-Band

Spare banded ear plugs, MOLDEX Jazz-Band


Accesorii scule electrice Lukas

Documents

Transcript of Accesorii scule electrice Lukas