Acc

Similar Resumes

« Previous Resume | Next Resume »

Resume ID: 33310197 | Last Active: 24 Aug 2012 | Last Modified: 9 Jul 2011

Add Notes to Resume

Anup Pathak Date of Birth: 28 May 1987Gender: MaleNationality: India

Room No:- 3, Near Bone mill bus stop, HesargattaMain Road, Bangalore-57

Phone: Not SpecifiedMobile: 91-9241796957

Email: [email protected]

Current Location: Bangalore

Dploma in mechanical engg. with 2 year exp. in Quality control engineer

Work Experience : 2 years

Skills : quality control engineer

Domain Knowledge : Not Specified

Industry : Machinery/ Equipment Mfg.

Category : Production/ Engg/ R&D

Roles : Quality Assurance/ Control

Current Employer : vigneshwara technologies india. pvt. ltd

Current Annual Salary : 2.40 lacs per annum

Previous Employer : island hydraulics india.pvt.ltd

Work Authorization : Need H1 Visa - Authorized to work in India

Highest Degree Held : Diploma, Mechanical engineering, Bangalore University

2nd Highest Degree Held

: Diploma, Mechanical engineering, Bangalore University

Preferred Job Location : Bangalore

Include Resume Summary

http://recruiter.monsterindia.com/v2/resumedatabase/searchresult.html?from=SIM_RES&simresid=33310197

mailto:[email protected]

http://recruiter.monsterindia.com/v2/resumedatabase/resume.html?resid=31773683;uid=23163115;sig=rs-1-e589cd3671faf24d97f12c3b93eefe5a-1;words=Quality%2CB.TECH%2CENGINEER%2CENGINEERING%2CB.E%2CENGG%2CENGINER%2CENGINEERS;tokens=;emps=;r=;ucid=1;ufd=1;mosf=0;



curriculum vitae

ANUP KUMAR PATHAKE-mail: [email protected]: (+91)9241796957

PRESENT ADDRESSRoom No:- 3,Near Bone mill bus stop,HesargattaMain Road,Bangalore-57

career objectiveTo obtain a position as Quality Control Engineer where I can utilize my skills in testing product and services for the growth of the organization.

summary Quick learner, Dynamic team player. Self motivated with high team spirit and professional outlook Good communication skill and ability to learn & adapt with the new environment Extensive knowledge of testing and improving quality of services and products Possess excellent monitoring and supervisory skills qualification3 Years Diploma in Mechanical Engineering from from RKP (AICTE), Approved by TechnicalEducation Board, Bangalore, Govt of Karnataka Total Work Experience:ISLAND HYDRAULICS (I) PRIVATE LIMITED- PEENYA BANGALORE July 2009- Aprail2011

Island hydraulics is the manufacture of Hydraulic, Pneumatic cylinders and Hydraulic power packs as per ISO Standards for machine tools, Earth moving, material handling, industrial automation, water hydraulics etc.

Vigneshwara technologies - Peenya Bangalore May 20011 to present

Vigneshwara technologies is a leading manufacture of machine tool ,shaft , pully, &and main mfr of fabrication for any kind of project.As per ISO 9001-2008.

Designation: Quality Control Engineer Responsibilities: Inspect the product for optimal quality ,prepared appropriate report's to manage the quality level of the product Monitored the equipments used and the procedures followed in the inspection process Ensuring smooth implementation of Quality systems to ISO 9001:2008 and conforming all compliance reports to auditors Leading, Guiding and motivating a team of our Technicians, Operators and Maintenance Fitter Participated in various meetings and discussions relating to the quality issue. Plays a leading role & responsible for spares cost reduction Machining Process & Quality Systems Management To Maintain the Quality standards Administered the inspections in accordance to the Quality and certification programs to assure that it meets all qualityrequirements. software knowledge:

Calibration knowledge

Vernier calipers, micrometer, bore gauge ,gauge,all kind of calibration equpment

Operating Systems WINDOWS XP & 07, VISTA ,Ms office.

personal details:

Name ANUP KUMAR PATHAK

Father Name RAVINDRA PATHAK

Martial Status Single

Sex Male

Nationality Indian

Date of Birth 28th May 1987

Hobbies Playing cricket, Cooking

Languages English, Hindi

Permanent Address

ANUP KUMAR PATHAKRoom No:- 3,Near Bone mill bus stop,HesargattaMain Road,Bangalore-57

.PLACE: - bangaloreDATE: - (Anup kumar pathak)

Page 2 of 2

Similar Resumes


Resume ID: 31773683 | Last Active: 26 Dec 2012 | Last Modified: 7 Dec 2012

Add Notes to Resume

Saroj Kumar Sahoo Date of Birth: 3 May 1982Gender: MaleNationality: India

R.K.Celestail home, battrahali,bangalore-49


Email: [email protected] email: [email protected]








Engineer in Quality with 4 year & 0 months experience


Skills : Quality assurance


Industry : Machinery/ Equipment Mfg.



Current Employer : MIM Tec.pvt.ltd. bangalore


Previous Employer : CIC, noida

Highest Degree Held : Diploma, Mechanical engineering, Board of Technical Education


: Diploma, Mechanical engineering, Board of Technical Education

Preferred Job Location : Bangalore, Bhubaneshwar

CURRICULUM VITAE SAROJ KUMAR SAHOOR.K.Celestial Home,

Bhattarahali, Bangalore-49

Mob: +917795123238

E-mail: [email protected]

Objective:Seeking a Challenging position in the field of MECHANICAL ENGINEERING with a growth-oriented company, where my Educational background and experience can be utilized for achievement at work, there by contributing to the company's growth and profitability.Educational Qualifications: Passed Diploma in Mechanical Engineering with 78% (distinction) from Raman Polytechnic, Bangalore, 2004-2007.Experience: 3.8 years�Professional Experience: Working as an “Engineer-QA” in Indo-US MIM Tec Pvt. Ltd since 12th July 2010 to till date.Company Profile: Indo-US MIM Tec Pvt. Ltd, Bangalore is an ISO/TS16949 certified company involved in design and manufacture of complex and high precision parts using Metal Injection Molding (MIM) as the core technology. The MIM parts are widely used in Electronic, Firearms, Automobile, Medical industries etc. Some of the clients are Honeywell, Black & Decker, Motorola, TRW, Amphenol, Lucas TVS, Tata Motors, Cummins, Parker, BorgWarner, Brakes India, Sig Arms, Israel Weapon Industries (IWI), etc.

Job Profile: In-charge of QA function & leading a team of quality covering in-wardInspection & in-process inspection.

Conducting process & Product Auditing. SPC studies for critical parameters. Inspection of new Product development parts (NPD). Preparation of MOP (Key Indicators). Preparation of inspection standards (Quality Plans). Constant exposure to 7 QC tools. Knowledge of ISO/TS-16949 audit and documentation. Responsible for Calibration of measuring instruments & gauges. Conducting meeting with Engineering & Marketing department toUnderstand customer requirement.

Previous Professional Experience : Worked as a “Junior Engineer Trainee to an Asst. Engineer-QA” in COMPETENT INDUSTRIAL CONSULTANTS, Noida-01(UP) since 10th Dec. 2008 to 30th June 2010.Company Profile: COMPETENT INDUSTRIAL CONSULTANTS, Noida(up) is a manufactures and exporter of crimping machines, digital crimping machines, bench type crimping machines, semi automatic machines, micro processor controlled crimping machines, cross-section analysis system, end feed pneumatic feed applicator, joint feed applicator, motorized pull testers, side feed applicator, side feed pneumatic applicator, etc.Job Profile: Inspected the incoming material Inspected outgoing & incoming venders parts Inspected stage wise parts After developed the parts, then freeze the drawing Monitored the house keeping Trained to the operator about 5's,house keeping, explained the drawing Primary maintenance of instruments Any problem came about the quality, then solved the problem, discuss with customer & my seniorProfessional Training Programs Attended : Team building Communication and presentation skill Kaizen program Personality Development Metrology & measurement 5S Internal audit & TS-16949Computer Proficiency: Microsoft words Microsoft excel Cattia V5Instruments Handling: Height Gauge, Micrometer, Vernier Caliper, Plunger Dial, Profile Projector, Video Measuring System, Wireless data transmit system, Hardness Tester, Height Master, Roundness Tester, Surface Tester, etc.�Personal Profiles :�Father's Name : Narahari Sahoo

Address (permanent) : Saroj Kumar SahooAt- NarendrapurPo-Bhutamundai

Dist-Jagatsingh Pur

State- Orissa

Pin- 754141

Gender : Male�Martial Status �� : Single�Nationality �� : Indian�Date of Birth �� : 03/05/1982Language Skills : Hindi, Oriya & EnglishHobbies�� : Playing Cricket, watching TV, listening Music&Reading newspaper

Declaration:I here declare that above my curriculum vitae are true, correct and complete to the best of my knowledge. I am also confident my ability to work in a team.Thanking youYours faithfullySaroj Kumar SahooPlace:Date:

Similar Resumes


Resume ID: 20432631 | Last Active: 15 Sep 2012 | Last Modified: 10 Nov 2010

Add Notes to Resume

Prashanth Shetty Date of Birth: 4 June 1986Gender: MaleNationality: India

Basawehwaranagar Bangalore









DME with 4 years EXPERIENCE IN QUALITY ASSURANCE

Work Experience : 4 years 6 months

Skills: Supplier Quality Assurance,Quality Management Systems,Inspection


Industry : Automotive/ Ancillaries,Machinery/ Equipment Mfg.



Current Employer : MILLIPORE Bangalore


Previous Employer : Lincoln Helios, Bangalore

Highest Degree Held : Diploma, Mechanical engineering, Nitte Institute


RESUMEAddress: M.I.G 4A6th mainIInd Stage, K.H.B Colony,Basaveshwaranagar,Bangalore-560079Name: PRASHANTH SHETTY.Career Objective: To cultivate as much as skills and process possible to get the right quality of product at the right time.

Father's Name: Late Narayan Shetty.

Date of Birth: 4th June 1986.Discipline: Mechanical.

Permanent Address: Bandasale HouseBolanthoor PostBantwal TalukDakshina KannadaMangalore -574222Contact no: 9845558148.

E-mail: [email protected]

Academic Qualifications:

Qualifying Examination

Year Of Passing

Institution % Obtained

S.S.L.C 2000-01 Balavikas English School Mani. 80.16

P.U.C 2001-03Sri Ramakrishna P.U.College Mangalore.

52.5

Diploma In Mechanical

2003-06Nitte Rukmini Adyanthaya Memorial Polytechnic Nitte.

Avg of 72.5 in 6 semesters

Work Experience:Worked as Junior Engineer in Quality department of Lincoln Helios (India) Ltd Bangalore from June 2006 to June 2008

Currently working as Quality Assurance Inspector and Doc control co coordinator in Millipore India Pvt Ltd Bangalore since June 2008.

Job Description:In Lincoln Helios India Pvt Ltd (June 2006 to June 2008):

Suppliers of Centralized lubrication systems to steel, Cement and automobile industries.

Inspection:● Responsible for quality of incoming components (Components includes machined, fabricated components& standard brought outs).

● Able to handle instruments like vernier calipers, micrometer, air gauge, bore gauge, height gauge, profile projector, dial stand, slip gauge, hardness tester, surface roughness tester etc.

Calibration:● Handled calibration for 600 instruments and gauges.

Worked in SAP environment. (Knowledge of material movement, creation of purchase order, check for the stock availability etc) Supplier Quality Assurance activities:● Supplier Evaluation.

● New Product Development.

● Initiate Corrective Actions for System and Product improvements.

Implementation of Quality Management Systems in work area.In Millipore India Pvt Ltd (Since June 2008):

Suppliers of Filtration Systems to Pharma Industries, adherence to ASME, BPE and Good Manufacturing Practices.

Supplier Quality Assurance: New Product Development Co ordinate with suppliers for Product Development,improvement in product quality and delivery rating. Conduct Supplier evaluation/ re evaluation. Initiate and implement corrective action at supplier end, if the required quality and delivery rating is not achieved. Monitoring of manufacturing practices w.r.t the company's procedure at supplier end. QMS and Doc Control: Co ordinate with the doc controllers of Head Office at France for timely release of documents like purchase specifications, drawings, procedures etc. Coordinator for effective implementation of Quality Management System through out the organization. Co ordinate with Management Representative (MR) for organizing the Internal audits, Customer audit, surveillance audit and management review meeting.Computer Skills: MS office, AutoCAD, Solid Modeling, SAP & Pilgrim (Software for quality documentation systems).Training Undergone:

1) Effective Public Speaking.

2) First Aid.

3) Industrial Safety.4) ISO 9001:2008Languages Known:

To Read To Write To Speak

Kannada Kannada Kannada

English English English

Hindi Hindi Hindi

Reference: Mr.Vasudeva RManager QualityTyco Electronics Ltd Bangalore.Phone-9945527622.I declare that the information given above is true to the best of my knowledge & belief.Place: Bangalore. Yours faithfullyDate: 27 Oct 2010. (PRASHANTH SHETTY)Page 3 of 3

Similar Resumes


Resume ID: 41930128 | Last Active: 9 Nov 2012 | Last Modified: 9 Nov 2012

Add Notes to Resume

Sathyaraj A Sathya Date of Birth: 17 Apr 1989Nationality: India

# NO 153Muneshwarnagar , near jai Bharath Industrial Area yeshwanthpur bangalore

Phone: 91-080-65752764Mobile: 919902179209








DME with 3 yrs exp in quality conrol , quality assurance , desinging in (NPD)


Skills : 2 yrs exp in Quality and 7 mnths exp in NPD


Industry: Machinery/ Equipment Mfg.,Non-Ferrous Metals (Aluminium, Zinc etc.)


Roles : Quality Assurance/ Control, Other Production/ Engineering/ R&D

Current Employer : Zenith precision pvt ltd


Previous Employer : Kar Mobiles ltd

Work Authorization : Green Card Holder - Authorized to work in India

Highest Degree Held : Diploma, Mechanical engineering, Karanataka University


: Other, Other, Not Specified


CURRICULUM VITAE

SATHYARAJ.AS/O. AMRUTHAM.M# 153, Muneshwarnagar , near jai Bharath industrial area ,yeshwanthapur Bangalore-560022:[email protected]: +91-9902179209CAREER OBJECTIVE: To be part of an organization which harbors talent, encourages innovation, provides challenging tasks, and promotes growth, to best implement available skills through performance.

PERSONAL ATTRIBUTES: Adaptability to different surroundings, team spirit, punctuality, learn ability, willing to travel, good interpersonal skills, and good oral and written language skills.

EDUCATIONAL QUALIFICATION: S.S.L.C year of passing in 2004School : Cambridge. High School, Mathikere Bangalore-560057Board : Karnataka State Secondary Education Board BangaloreDiploma in Mechanical Engineering Year of Passing in 2010College : I.R Polytechnic, Bangalore-560058

Board : Department of Technical Education Karnataka.

ACADEMIC PROJECT:

6th semester Diploma in Mechanical Engineering main project “Diesel Engine Generator” carried out at I.R polytechnic. Bangalore-560058ADDITIONAL QUALIFICATIONS: Basic Computer Skills M S Office

Auto CAD.WORK EXPERINCE:

working as Quality inspector executive in kavin Industries Bangalore ,since 01 April 2009 to 04 March 2011 Working as Quality inspector (m/c shop) in Kar Mobiles Limited (RANE Group of companies), Bangalore since 07 March2011 TO 29 feb2012 Working as a Quality Assurance ,Quality Control in zenith precision pvt. Ltd. Since 1st march till date.Company Profile:

M/s Kar Mobiles Ltd is an, QS 9000, and ISO/TS16949 Certified company, Manufacturing internal combustion engine valves.

Customers: General Motors, Deutsch, Diesel Loco Works (Railway), Cummins, Ashok Leyland, Larsen and Turbo Group of Companies, Maruthi, Simpson, Escorts tractors, Eicher, Tafe Motors & Tractors Limited

Company Profile:

Zenith Precision Pvt Ltd an AS-9100-REV-C Certified Company Manufacturing Aero Space Parts .

Customers:

Good rich aerospace, Magellan Aerospace,

General electric Mico bosch , Deutsch group of companies ,Areva (Chennai ) Tyco electronics,

Manufacturers and supplied of precision turned and milled for the above customer since 25 years

Roles and responsibilities: Carried out first off inspection in machine shop. Conduct process & machine capability, study as per plan. Maintain 5's in working area like shop floor, standard room etc…, Conduct product audit in M/c Shop . Meeting system activities like PMRC, DRM, and gap analysis etc.., Knowledge in gauge settings as per control plan & requirements. Involving Scrap and Rework Review on monthly basis. Preparing master valves for special gauges like turn groove position, seat height gauge, gauge thickness and adjustable snap gauges etc.., Using 7 QC tools to reduce internal rejections. Analyzing customer complaints and implementation of Corrective actions. Implementing Kaizen in shop floor improvements.Instruments Used:

CMM ( Co-ordinate Measuring Machine )

Micro meter, Profile projector, Roundness Tester, Tool Maker's Microscope, Surface Finish Test, Hardness tester, TESA Scanning Machine, Ultrasonic Tester, Multi Gauge, Height Gauge and Various Attributes Gauges

PERSONAL INFORMATION

Name :Sathyaraj .A Father's Name :Amrutham. M Mother's Name :Latha .A Date of Birth :17th APRIL 1989 Marital Status :Single Languages Known :English, Kannada, Hindi & Tamil. Nationality :India Religion : Christian

Hobbies :Listening music, Reading Books, playing gamesDeclaration: I hereby declare that the details given above are true and correct to the best of my knowledge and beliefDate:Place: Bangalore SATHYARAJ A

Similar Resumes


Resume ID: 42482175 | Last Active: 5 Dec 2012 | Last Modified: 5 Dec 2012

Add Notes to Resume

Venkatesh Murthy Date of Birth: 10 Feb 1990Gender: MaleNationality: India

yelanka in banglore




4.4YEARS EXPERIENCE IN QUALITY DEPARTMENT


Skills: inspection of all kinds of products,Conducting regular process and product audits,Rejection analysis


Industry : Machinery/ Equipment Mfg.,Engineering, Procurement, Construction



Current Employer : HYCOMENGINEERING


Previous Employer : TYCOELECTRONICS

Highest Degree Held : Diploma, Mechanical engineering, Not Specified

2nd Highest Degree : Diploma, Not Specified






Held

Preferred Job Location : Not Specified

ResumeB.VenkateshMurthyE-mail: [email protected] Mobile no: 9738274026My aim is to give my best in the work I do, be flexible so as to adapt myself to demanding situations. Not only be open to learning new skill but to apply them to take my organization and myself to a higher level.

Name (as appears in certificate) B.VenkateshMurthy

Father's name M.BEERAPPA[LATE]

Date of birth (as appears in certificate) 10-2-1990

Sex Male

Permanent addressNo. No. 40,8th A MAIN RAJARAJESHWARI TEMPLE STREET MAIN ROAD DEVSANDRA KRPURAM

Present addressNo. 40,8th A MAIN RAJARAJESHWARI TEMPLE STREET MAIN ROAD DEVSANDRA KRPURAM

Languages known English, Hindi, kannada , telugu

Hobbies and interestPlaying cricket, reading books, listening to songs.

Good learning ability. Flexible to work in different conditions. Good at team work. Hardworking. Optimistic.

course InstitutionBoard/

University

Year of passing

percentage

10th KVB SSLCApril 2005

76%

Diploma In MechanicalEngineering GENE

RAL

Government.

polytechnic chintamani

Technical education Board

MAY-2008

67%

Basics of CNC programme. AutoCAD Designing. Good Knowledge of Handling of Precise and Accurate Measuring Instruments like Vernier caliper, Micrometer, Dial Indicator, Comparators, Bore Gauge, Digital Bore Gauge (Pneumatic). Basics of Computer skills MS office.Organization: TYCOELECTRONICSDURATION: AUGUST 2008-FEBRAUVARY 2010ROLE: QUALITY CONTROL TRAINEE. To take care of all INSPECTION components of in house manufacturing Making In process Audit at the Assemblies and Testing Areas.


Clearing the DISPATCH Materials by preparing required documents and checking out of components and their assembly To take care of all INSPECTION of the Incoming products (Out sourced Products). Material testing Maintain Records of the Dispatch components and material Test Reports Etc.Organization: HYCOM ENGINEERING INDIA PVT LTDDURATION: MARCH 2010 -NOVEMBER 2010[DIPLOMA ENGGINIER TRAINEE]ROLE : QUALITY CONTROL TRAINEE. To take care of all INSPECTION of the Incoming products( Out sourced Products). Making In process Audit at the Assemblies and Testing Areas. Making Inspection of New Products which meant for Developments. To Maintain the Records of the Inspection Reports, Calibration Reports, Test Certificates, Non-Conformation Reports Etc.After completing the Trainee period appointed as an Asst. Engineer / Supervisor for Quality control Dept.DURATION: DECEMBER2010- NOVEMBER2012RESPONSIBILITIES: Knowledge transfer to the assembly and manufacturing team. Developing Quality systems. Ex: Quality plan, monthly rejection analysis, Vendor audits Product auditing etc. Validating the records and documents. Ex: Inspection Reports, Calibration report, Rejection analysis,Product Aduits etc. Communicating with vendors and problem solving. GRN Clearance, Process checking in vendor places and problem solving, Making the Regular Tests like Millipore Test, NAS Class Test.I hereby declare that the above content are true to the best of my knowledge and the documents in support of the above content willbe produced as and when required.

Signature

Bangalore (B.VenkateshMurthy)Career ObjectivePersonal InformationPersonal StrengthAcademic QualificationTechnical SkillsDeclarationWork ExperienceComputer Skills

Similar Resumes


Resume ID: 32854445 | Last Active: 8 Jan 2013 | Last Modified: 19 Apr 2012

http://recruiter.monsterindia.com/v2/resumedatabase/resume.html?resid=15528139;uid=16942580;sig=rs-1-ed700961f235396754274088aff92208-1;words=Quality%2CB.TECH%2CENGINEER%2CENGINEERING%2CB.E%2CENGG%2CENGINER%2CENGINEERS%2Csheet%20METAL%2CMETALLURGY;tokens=;emps=;r=;ucid=1;ufd=1;mosf=0;


Add Notes to Resume

Sampathu Date of Birth: 18 June 1983Gender: MaleNationality: India

Door no 340 New Thippasandra Hal III Stage Bangalore 560075




Quality Engineer


Skills: Inspection , Inspection plan,7 QC Tools ,Ø Have a very good patie SPC , Kaizens, 8 D, 5s, Lean


Industry : Automotive/ Ancillaries,Machinery/ Equipment Mfg.



Current Employer : BAeHAL


Previous Employer : Larsen Toubro,Molex india pvt ltd

Highest Degree Held : Diploma, Mechanical engineering, Board of Technical Education

Preferred Job Location : Bangalore, Mysore

CURRICULUM VITAE

SAMPATHU Ph:-9591536432

Door no 215, 1st Floor

5th Cross, 4th Main Road

Srinivas Nagar, BSK III stage

Bangalore 560050. : [email protected]

___________________________________________________________________________________________OBJECTIVE :Intend to perceive, build a career as a successful Engineer in a leading corporate with commitment & dedication and smart work. Willing to achieve and contribute as a key player in challenging & creative environment.EDUCATION QUALIFICATION :Technical Qualification: Diploma in Mechanical Engineering (General) D.M.E




Pursuing B.E in Mechanical Engineering

TECHNICAL SKILLS

Design software : AutoCAD, SOLIDWORKS

Operating System : WINDOWES XP

Knowledge in SAP

Knowledge of Special Tools : 7 QC Tools , SPC , Kaizens, 8 D, 5s, Lean, Purchase

Personal Strength: Possess qualities like quick learning and good Analytical Skills. Ability to work in a team. Good temperament, cool and composed attitude that enables me to keep my thinking faculties intact even in difficult situation. My intense and efficient working nature and good Communication skills make me Quickly-Adaptable to job Challenges.Summary of Skills: Have a very good patience. Strong work ethics and highly dedicated to work. Knowledge in Geometric Dimensioning and Tolerance (GD & T). Inspection and measuring of mechanical parts. Through knowledge of, TMM, Profile Projector & Micro hite, other precision measuring instrument. Familiar with Basic Metrology Skills, GD&T, Gauging Methodology, Product Drawing SAP knowledge of inspection, inspection plan, N.C.RPresent Working Area:Working as an Diploma Engineer at BAeHAL Software Limited.,BAeHAL is a joint venture of BAE Systems, UK and Hindustan Aeronautics Limited, India. BAeHAL is built on the strength of its parentage to deliver world-class IT solutions for clients across the world. Established in 1993 in Bangalore BAeHAL provides IT solutions and services to Aerospace, Defence, Transport and Engineering Industries. BAeHAL is built on the strength of its parentage to deliver world-class IT solutions for clients across the world. Flexible, high quality, cost-effective IT solutions are offered to customers for both onsite and offshore services.

National Aerospace Laboratory [NAL]: Worked As a Quality Engineer thru DGCA

Director General of Civil Aviation & Conduct the Auditing of First Indian civil aircraft-SARAS

Responsibility Handled in National Aerospace Laboratory [NAL]

Inspection of all Sheet metal parts (dimensional, Process, conductivity, Coating) Process sheet Audit. Final Inspection Report Generation. Final Summary of Review with DGCA Team & NAL Team Involved in Auditing of All the Departments of NAL Audit Report PreparationCURRENT EXPERIENCE

Currently Working In BAeHAL- NAL ProjectOrganization : BAeHAL Software Ltd. Bangalore.Designation : Diploma EngineerPeriod : Sep-2010 to till datePrevious Working ExperienceM/s. Molex India pvt Ltd. Bangalore. (world second largest electronic connectors and inter-connection systems manufacturer having 56 manufacturing facilities in 26 countries with 9% world market share in connector business.)Organization : Molex India Pvt Ltd, Bangalore.Designation : Quality Inspector

Period : oct-2008 to sep-2010Instrument &Gauge used for Inspection and its Calibration:- Profile Projector, ( Nikon ) Tool Makers Microscope, ( Mitutoyo ) Tesa Micro Hite ( Mitutoy ) Tesa-PlusM600 Linear Height Master, ( Mitutoyo ) Surtronic (Surface Finish), Quick vision scope (CMM), Smart scope, Digimic.etc.Trainings undergoned: - SPC (Statistical Process Control), Calibration and MSA, 5S & Implemented 5S in working area Lean training & Passed Lean Vidhyarthi Certification Little Knowledge On APQP,PFMEA, PPAPInspection Skill: - Measuring of Statistical Element like Point , Line , Circle , Plane , Sphere , Intersection , Symmetry, Parallelism, Straightness, Roundness, MMC, LMC, Position Tolerance,Flatness, Perpendicularity, Angularity, Distance and Editing of Geometric elements to attain the Measurement. Conducting first Article Inspection For Precision Injection Molded Parts using ProfileProjector, TMM, Height Master, Gauges and other Precision measuring instrument. Conducting Layout Inspection , In - Process Inspection In electronic Sub AssemblyMolding, Stamping SectionCompany Profile: -“MOLEX INDIA LTD”. Is a ISO9001:2008 ,TS 16949: 2009 Certified company and is fully owned subsidiary of Molex Inc, USA. Molex Inc is a global company with an annual turnover in excess of US$3 Billion. It enjoys listing among top fortune 500 companies, the corporate as its presence in all corners of the world and caters basically to connector and harness market.

Molex India is involved in manufacture and marketing variety of connectors for Telecom, Automotive, Industrial, White Goods, Patch cords, Optic fibers, & Wiring Harness assemblies for consumer durables, Chargers for mobile phones, etc

NATURE OF WORK: -

MOLEX INDIA PVT. LIMITED. Inspection of products in Connector Assembly, Injection Molded Components, High Speed Metal Stamped parts, Incoming Material like, metal strips, cables, raw material, Plating, etc, and. Responsibility includes first article inspection for approval of new products, Incoming inspection, In-process Inspection, Patrol Inspection, Final inspection, Dock Audit, Conducting Mech. & Electrical reliability test on new parts produced. For Qualification In addition, Responsible for first off approval for production &Generating Quality Plans of individual part drawing by identifying critical & major dimensions for first piece, in-process inspection & last piece in above-mentioned department's & final audit on parts produced as per sampling plan the Inspection sampling based on MIL-STD-105E level 3 I am conversant with quality systems ISO 9000, QS 9000, TS 16949 Internal Quality Standards, and Maintenance of Documents Responsibility includes first article inspection of new tools like plastic injection molds products.Customers : Nokia , A.P.C , Whirlfool ,BOSCH, Wipro, Onida N.C.R, Ford, General Motors, Compaq, HP, Apple, Whirlpool, Nokia, Samsung, Motorola, Phillips, Sony, L.G, Onida, ITI, Bharti Telecom, BPL, Reynolds, Delphi TVS etc.PREVIOUS EXPERIENCE:

Organization : Larsen Toubro Ltd.Medical equipments Manufacturing

Mysore .Designation : Quality InspectorPeriod : December 2006 to October 2008Nature of Work : Inspection of Molded Parts ,Assembled units, Raw Material Inspection ,Sample inspectionReports , First Article Inspection Report of Chassy , Brackets & Molded Parts.

Conducting assembly Functional tests, Vibration Test and analysis. Well Worth Using of Mech Instruments Profile Projector , Height Gauge , Bore Gauge Hardness Tester etc .. Calibration Of Mechanical Instruments Like Height Gauge , Vernier Caliper, Thread Gauges, Micrometer , Dial Gauges , Torque screw drivers etc.. Calibration of Electronic Instruments Like Timer , Burn in Chamber , Analyzer ,simulators ,Soldering Station etc.. Preparation, Vendor N.C.R, Documentation Of calibration and inspection Records And preparing monthly reports & I.S.O 9001:13485 documentation .PERSONAL DETAILSName : SampathuFather's Name : MadppaDate of Birth : 18 June 1983Permanent address : Sampathu s/o MadappaKethahally (vilg)Mudnakudu PostChamarajanagara (tq & dist) Pin code -571128Sex : MaleMarital Status : SingleLanguages Known : Kannada, Hindi EnglishNationality : IndianHobbies : web browsing, listening music &�Playing ChessDECLARATIONI declare that all the above-furnished details are true to the best of my knowledge.

Place: Bangalore

Date: (SAMPATHU)

Similar Resumes


Resume ID: 39413081 | Last Active: 27 Oct 2012 | Last Modified: 7 Oct 2012

Add Notes to Resume

http://recruiter.monsterindia.com/v2/resumedatabase/resume.html?resid=38196581;uid=42792938;sig=rs-1-ed700961f235396754274088aff92208-1;words=Quality%2CB.TECH%2CENGINEER%2CENGINEERING%2CB.E%2CENGG%2CENGINER%2CENGINEERS%2Csheet%20METAL%2CMETALLURGY;tokens=;emps=;r=;ucid=1;ufd=1;mosf=0;


Praveena Acharya Date of Birth: 23 Jul 1989Gender: MaleNationality: India

Praveen Near By Nalapaka Hotel,K.R Road K.E.B circle Hoskote Bangalore-562114


Email: [email protected] email:[email protected]


CURRICULUM VITAE


Skills : Total Experience in Q.A/Q.C


Industry : Machinery/ Equipment Mfg.,Engineering, Procurement, Construction


Roles : Production Manager/ Engineer, Quality Assurance/ Control

Current Employer : Arkay Fabsteel Systems Pvt. Ltd.

Current Annual Salary

: 2.00 lacs per annum

Previous Employer : L&T Komatsu

Work Authorization: Authorized to work in Australia,Bahrain,Kuwait,Malaysia,Oman,Singapore

Highest Degree Held : Diploma, Mechanical engineering, Bangalore University


: Diploma, Mechanical engineering, Bangalore University

Preferred Job Location

: Bangalore, Hosur, Mangalore

CURRICULUM VITAEPRAVEENA ACHARYAS/O RAGHAVA ACHARYA“SHABHARISHA KRIPA” MUDRADY POSTKARKALA T.Q UDUPI DIST-576145E- MAIL: [email protected] MOBILE: 9900520350






OBJECTIVE:

Building a successful career by contributing the best of my abilities using technical, interpersonal and leadership skills, growing along with the company.

EDUCATIONAL PROFILE:

EXAM PASSEDAND DISCIPLANE

INSTITUTIONYEAR OFPASSING

AGGREGATE

DIPLOMA INMECHANICAL ENG

G

KURUNJI VENKATRAMANA GOWDA POLYTECH

NIC, SULLIA2010 63.92%

PRE-UNIVERSITYBOARD,KARNATAKA

G.P.U COLLEGE,HEBRI

2007 65.50%

S.S.L.CM.N.D.S.M HIGH SCHOOL,

MUDRADY2005 71.20%

SOFTWARE SKILLS:

SOLID EDGE ST-2, SOLID EDGE DRAFTING, AUTO CAD MS WORD, MS EXCEL, POWER POINT

EXPERIENCE:

Q.C INSPECTOR FOR 1 YEAR IN L&T KOMATSU Q.C/Q.A ENGINEER FOR ARKAY FABSTEEL SYSTEM PVT LTD (NOW WORKING)

PERSONAL SKILLS:

ABILITY TO WORK IN A TEAM, LEADERSHIP AND MANAGEMENT SKILLS ABILITY TO COPE UP WITH ANY KIND OF ENVIRONMMENT SMART WORKER. 5S, KAIZEN, POKA-YOKE, 7QC tools, 8D, PPAP, PPM etc.

PERSONAL PROFILE:

DEGREE &DISCIPLINE

DIPLOMA INMECHANICAL ENGINEERING

DATE OF BIRTH 23 July 1989

FATHER'S NAME RAGHAVA ACHARYA

SEX MALE

NATIONALITY INDIAN

RELIGION HINDU

MOTHER TONGUE KANNADA

LANGUAGES KNOWN ENGLISH, HINDI, KANNADA,

HOBBIES CRICKET, VOLLEY BALL, DRAWING, NET BROWSING.

PERMANENT ADDRESS

PRAVEENA ACHARYAS/O RAGHAVA ACHARYA“SHABHARISHA KRIPA” MUDRADY POSTT.Q: KARKALADIST: UDUPIPIN: 576145STATE: KARNATAKA.

ADDITIONAL QUALIFICATION:

ULTRASONIC TESTNG Level II (ASNT)EMPLOYMENT HISTORY1)From August 2010 TO August 2011L&T KOMATSU LTDAs a Quality Inspector from WELDTECK SYSTEMS. I was assigned for all Gas cutting profiles and heavy fabricated structures inspection.JOB DESCRIPTION:

Audit inspection of casting & of Gas cut sheet metal profiles. Final inspection of all model booms Audit inspection of paint thickness & B.H.N Flatness study of Track Frame, by collecting flatness readings of consecutive TFS (When ever required) Review of vendors report Inspection of salvage components for SM, with preparing checklists for salvage components(With supporting drawings) Follow up with Supply Module to move back the rejected profiles or structures to vendor place. Co-ordinate with weld engineering to ensure Quality of plates. (Removal of gas cut slags, paint marks, stickers on weld area, oily surface, gas cutting serrations, pit marks etc.) Analysis of root gap problems in boom with related Process Engineer. Preparing of assembly SNAG report (Monthly) CAR (Corrective Action Record) F.T.A (First Time Acceptance) Fabrication Quality Index.KAIZEN:

Master list & Calibration record of inspection GAUGES Layout for Training Centre & Design made for welding & Gas cutting components.2)From September 2011 TO Till Date..ARKAY FABSTEEL SYSTEMS PVT LTDAs a Q.C/Q.A Jr.EngineerJOB DESCRIPTION: Final Quality inspection & Development of all fabricated structures for L&T KOMATSU, TEREX, JCB, MERITOR, MAHINDRA&MAHINDRA. Incoming component inspection, prepare inspection & quality plans. Maintaining the calibration records of various instruments/ equipment calibrated in in-house & vendor places. Root cause analysis and implementation of corrective action for process related concerns. Analyze failure, corrective and preventive action to respond to customer complaints Witnessing and performing Non Destructive Examination like DPT & UT.DECLARATION:I hereby declare that the information furnished above is true to the best of my knowledge & belief.Thanking you

Yours faithfully

Date :Place : Bangalore (Praveena Acharya)

Acc

Documents

Transcript of Acc