8/3/2019 ac-164

http://slidepdf.com/reader/full/ac-164 1/2

©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation, Cummins and PowerCommand are registeredtrademarks of Cummins Inc. “Our energy working for you.” and AmpSentry are trademarks of Cummins Power Generation. Specifications aresubject to change without notice.AC-164d (6/10) Page 1 of 2 

PowerCommand® 2100digital generator set controloptional upgrade kits 

Descr ip t ion  Features  

The PowerCommand ® control (2100) is a microprocessor-based generator set monitoring, metering and controlsystem. The control provides an operator interface to thegenset, digital voltage regulation, digital governing andgenerator set protective functions. The integration of allthe functions into a single control system providesenhanced reliability and performance compared toconventional control systems. It is suitable for use on awide range of generator sets in non-parallelingapplications.

Kits are available to add control features to generator setsshipped with the PowerCommand control, and also toupgrade generator sets with other control systems to

PowerCommand capability.For detailed specification information, see PowerCommand control spec sheet (S-1409).

Upgrade k i t s - Allow PowerCommand (2100) series

controls to be upgraded to include factory features in thefield. Available kits include:

- PowerCommand network (optional) - provides LonMarkinterface to external devices through a twisted pairwire.

- Integrated power transfer control (optional) - providesautomatic power transfer control functions integratedinto genset control.

- Control heater- Output relay kit- Bargraph AC meter display- Membrane panel repair kits

- Language insertsComple te c on t ro l k i t s - Provide all the parts

necessary to convert an existing generator set foroperation by the PowerCommand (2100) control system.Parts available include control box assembly, mountinghardware, conversion plates for Detector and previoussimilar physical configurations, senders and otherhardware. 

8/3/2019 ac-164

http://slidepdf.com/reader/full/ac-164 2/2

Our energy work ing for you.™ 

www.cumminspower.com

©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation, Cummins and PowerCommand are registeredtrademarks of Cummins Inc. “Our energy working for you.” and AmpSentry are trademarks of Cummins Power Generation. Specifications aresubject to change without notice.AC-164d (6/10) Page 2 of 2 

Upgrade k i t s fo r opt iona l features  

Feature Part # Description InfoInstruction

Sheet

0300-3999 Alarm Module Kit- 12 Volt DC Coil C357KA08

0300-4000 Alarm Module Kit- 24 Volt DC Coil

Signals an engine shutdown fault condition. Any condition thatcauses the engine to shut the unit down will activate this alarm.Resetting the control will silence the alarm. C357

0541-0680-01 Control Relay Kit - 12 Volt DC Coil C616K631

0541-0680-02 Control Relay Kit - 24 Volt DC Coil

Includes three (3) 600 Volt/ 10 Amp control relays; 2 form-A, 2form-B contacts per relay. Includes DIN rail for box mounting. C616

  A362 0541-0682-03 Control Box Heater Kit- 120 VAC C

  A363 0541-0682-04 Control Box Heater Kit- 240 VAC

30 Watt control box heater kit. Includes heater, power cable, andstrain relief. C618

H606 0541-0683 Control Mounted Meter KitIncludes bargraph meter assembly, membrane panel, box door,and mounting hardware. C619

G023 0541-0768 Keyswitch KitKey switch kit (auto/ manual/ off). Includes a key operated switchfor additional security on PCC 2100 front panel. C625

0541-0769 Strain Relief KitStrain relief for customer connections. Includes strain reliefhardware for the bottom of PCC 2100 enclosure, 4 pieces. C626

KP60 0541-0770 Network Communication Module LonWorks network communications kit (FTT-10). C627

0541-0814-01 Annunciator Kit- Panel Mount

0541-0814-02 Annunciator Kit- w/ Enclosure

LonWorks annunciator installation kit (FTT-10); used with KP60feature. none

0541-0896-01* Membrane Replacement- without meters

0541-0896-02* Membrane Replacement- with meters

Used for replacing the membrane panel in the field. Providespanel and new door. C643

0541-0897* Language Panel Inserts- 14 Languages none

0541-0935* Language Panel Inserts- 5 Lanuages

These inserts are used with the membrane panel to customizethe PCC 2100 for a specific language. none

0541-0898-01 Emergency Stop 12 Volt DC

0541-0898-02 Emergency Stop 24 Volt DCNormally closed contacts C644

* Purchase components through parts

Cer t i f i ca t ion Warranty  

ISO9001 - This product set was designed

and manufactured in facilities certified toISO9001.

CU L - This product is CUL Listed, Category

NITW7.

 All components and subsystems are covered by anexpress limited one-year warranty. Other optional andextended factory warranties and local distributormaintenance agreements are available. Contact yourdistributor/dealer for more information. 

PT S - The Prototype Test Support (PTS)

program verifies the performance integrity ofa generator set design. Products bearingthe PTS symbol have been subjected todemanding tests in accordance to NFPA 110to verify the design integrity andperformance under both normal andabnormal operating conditions.

UL - The control is suitable for use on

generator sets that are Listed to UL 2200,Stationary Engine Generator Assemblies.The PowerCommand control is Listed toUL 508 - Category NITW.

CE - This product is suitable for use on

generator sets that are CE marked.

Amer icas

1400 73rd Avenue N.E.Minneapolis, MN 55432 USAPhone: 763 574 5000Fax: 763 574 5298

Europe, CIS, Middle East and Afr ic a

Manston Park Columbus Ave.Manston RamsgateKent CT 12 5BF United KingdomPhone 44 1843 255000Fax 44 1843 255902

Asia Pacif ic

10 Toh Guan Road #07-01TT International TradeparkSingapore 608838Phone 65 6417 2388Fax 65 6417 2399

Warning: Back feed to a utility system can cause electrocution and/or property damage. Do not connect generator sets to any building

electrical system except through an approved device or after building main switch is open.