RF Coaxial GooseneckProduct Line

About SWASouthwest Antennas is an antenna design and manufacturing company that provides a full range of technical services from initial product concept to final product manufacture.

Located in San Diego California, the technical staff at SWA has over 65 years of combined experience including electrical, mechanical, RF and software engineering. The company has designed high performance microwave antennas of all types since their founding in 2005.

Southwest Antennas is your partner for antenna designs and RF / Microwave communication solutions. Contact us today to discuss your next project.

• Antenna design and new product engineering• Custom or off-the-shelf antenna & antenna accessory product

solutions• Patch, Panel, Horn, Omni, and Antenna Arrays• Specialty products such as Low Noise Amplifier modules, Block

Down-Converter modules, RF Filter modules, Bias Tees, mounting systems, and more

• Custom RF cable assemblies, magnetic mounting systems, and custom kits for vehicles

• Body worn & concealment antennas

Markets and industries served by Southwest Antennas include:

• Broadband Microwave Communications (COFDM & MIMO)• Digital Microwave Video Communications (ENG & STL)• Electronics Warfare and Communications Intercept (EW & SIGINT)• Unmanned Air Vehicles and Unmanned Ground Vehicles

(UAV & UGV)• Mobile and Fixed Site (Vehicles / Infrastructure)• Unattended Ground Sensors (UGS)• Multi-Band Microwave Communications (802.11a, b, g, n)• Government Microwave Communications• Law Enforcement and Security• ISM Band Unlicensed Transceiver Products

Contact Southwest Antennas Web: Tel: Email: 81

45 R

onso

n R

d. S

uite

BS

an D

iego

, CA

9211

1

www.southwestantennas.com858-277-3300sales@southwestantennas.com

RF Coaxial GoosenecksNew for 2014 from Southwest Antennas!

Customizable length, outside diameter,and universal RF connector options RF Coaxial Gooseneck Connector Options

The all-new product line of RF Coaxial Gooseneck assemblies from Southwest Antennas allows for flexible mounting of omni antennas, especially with respect to other antennas and radio equipment.

Designed to work with a wide range of user applications and mounting options, the RF Coaxial Gooseneck assemblies are offered in five standard lengths (custom lengths also available) and can bend and hold angles beyond 90 degrees without compromising the RF performance of the system.

Ideal for harsh operating conditions, the RF Coaxial Gooseneck assemblies feature a rugged flex arm covered with durable neoprene primary seal heat shrink and polyolefin secondary heat shrink seals. All Goosenecks come with your choice of six universal black chrome low-visibility RF connector options.

General Technical Specifications

• DC - 8 GHz (HF, VHF, UHF, L, S & C bands)• Low visibility• Waterproof to 20 meters• Black chrome RF connectors• Bend and hold 90 degrees minimum• 9” to 18” goosenecks bend and hold 180 degrees

Applications

• Transmit and Receive Antennas• Handheld Radios• Small Form Factor Radios• Unattended Sensor Systems• Dismounted Communications• Precision Surveying Receivers• Unmanned Ground Vehicles• I.E.D. Recognition and Destruction• Asset Tracking• Oil and Gas Industries• Law Enforcement• Tactical Jamming Systems

The RF Coaxial Gooseneck assembly can be specified with any of the following RF connectors on one or both ends of the assembly:

Type-N Male(Non-Rotatingor Rotating)

Type-N Female TNC Male(Non-Rotatingor Rotating)

TNC Female SMA Male(Non-Rotatingor Rotating)

SMA Female

Southwest Antennas, Inc. • Innovative Antenna Solutions • Custom Antenna Design and Manufacturing • Tel: 858-277-3300

Note: The RF Coaxial Gooseneck Flex Arm is available in one of three outside diameter options. The smaller outside diameter flex arms are more flexible, but hold less weight load and have minimum bend and hold strength.

• .450” (lightest weight load, most flexibility, minimum bend and hold strength)

• .470” (medium weight load, medium flexibility, medium bend and hold strength)

• .495” (heaviest weight load, least flexibility, maximum bend and hold strength)

How to order

RF Connector #1 Flex Arm RF Connector #2

Product Details and Ordering InformationRF Coaxial Gooseneck assemblies from Southwest Antennas can be ordered with your customized selection of gooseneck assembly length, RF connectors, and flex arm outside diameters.

Flex Arm Outside Diameter including neoprene sleeve (inches)

Total Assembly Length (inches)

To order, simply select all of the components for your goosneck assembly from the Smart Part Number table shown below and call or email Southwest Antennas with this number to place your order. Southwest Antennas will then send you a corresponding product datasheet that calls out the unique specifications for your gooseneck assembly.

1099 RF Connector #1 Flex Arm Outside Diameter Total Assembly Length RF Connector #2Product ID • Type-N (m)

• Type-N (f)• TNC (m)• TNC (f)• SMA (m)• SMA (f)

• .450”• .470”• .495”

• 7.0”• 9.0”• 12.0”• 15.0”• 18.0”• Custom length (specify in inches)

• Type-N (m)• Type-N (f)• TNC (m)• TNC (f)• SMA (m)• SMA (f)

Example: 1099-TNC(m)-.470”-9.0”-SMA(m) would specify a gooseneck assembly with a TNC Male connector on end #1, a 0.470” flex arm outside diameter, 9-inch total length, and an SMA Male connector on end #2.

RF Coaxial Gooseneck Assembly Component Diagram:

RF Coaxial RF Gooseneck Smart Part Number Syntax: 1099-RF Connector #1-Outside Diameter-Total Assembly Length-RF Connector #2